| /* |
| * Vhost-user SCMI virtio device |
| * |
| * SPDX-FileCopyrightText: Red Hat, Inc. |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| * |
| * Implementation based on other vhost-user devices in QEMU. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| #include "hw/virtio/virtio-bus.h" |
| #include "hw/virtio/vhost-user-scmi.h" |
| #include "standard-headers/linux/virtio_ids.h" |
| #include "standard-headers/linux/virtio_scmi.h" |
| #include "trace.h" |
| |
| /* |
| * In this version, we don't support VIRTIO_SCMI_F_SHARED_MEMORY. |
| * Note that VIRTIO_SCMI_F_SHARED_MEMORY is currently not supported in |
| * Linux VirtIO SCMI guest driver. |
| */ |
| static const int feature_bits[] = { |
| VIRTIO_F_VERSION_1, |
| VIRTIO_F_NOTIFY_ON_EMPTY, |
| VIRTIO_RING_F_INDIRECT_DESC, |
| VIRTIO_RING_F_EVENT_IDX, |
| VIRTIO_F_RING_RESET, |
| VIRTIO_SCMI_F_P2A_CHANNELS, |
| VHOST_INVALID_FEATURE_BIT |
| }; |
| |
| static int vu_scmi_start(VirtIODevice *vdev) |
| { |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| struct vhost_dev *vhost_dev = &scmi->vhost_dev; |
| int ret, i; |
| |
| if (!k->set_guest_notifiers) { |
| error_report("binding does not support guest notifiers"); |
| return -ENOSYS; |
| } |
| |
| ret = vhost_dev_enable_notifiers(vhost_dev, vdev); |
| if (ret < 0) { |
| error_report("Error enabling host notifiers: %d", ret); |
| return ret; |
| } |
| |
| ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, true); |
| if (ret < 0) { |
| error_report("Error binding guest notifier: %d", ret); |
| goto err_host_notifiers; |
| } |
| |
| vhost_ack_features(&scmi->vhost_dev, feature_bits, vdev->guest_features); |
| |
| ret = vhost_dev_start(&scmi->vhost_dev, vdev, true); |
| if (ret < 0) { |
| error_report("Error starting vhost-user-scmi: %d", ret); |
| goto err_guest_notifiers; |
| } |
| |
| /* |
| * guest_notifier_mask/pending not used yet, so just unmask |
| * everything here. virtio-pci will do the right thing by |
| * enabling/disabling irqfd. |
| */ |
| for (i = 0; i < scmi->vhost_dev.nvqs; i++) { |
| vhost_virtqueue_mask(&scmi->vhost_dev, vdev, i, false); |
| } |
| return 0; |
| |
| err_guest_notifiers: |
| k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false); |
| err_host_notifiers: |
| vhost_dev_disable_notifiers(vhost_dev, vdev); |
| |
| return ret; |
| } |
| |
| static void vu_scmi_stop(VirtIODevice *vdev) |
| { |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| struct vhost_dev *vhost_dev = &scmi->vhost_dev; |
| int ret; |
| |
| if (!k->set_guest_notifiers) { |
| return; |
| } |
| |
| vhost_dev_stop(vhost_dev, vdev, true); |
| |
| ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false); |
| if (ret < 0) { |
| error_report("vhost guest notifier cleanup failed: %d", ret); |
| return; |
| } |
| vhost_dev_disable_notifiers(vhost_dev, vdev); |
| } |
| |
| static void vu_scmi_set_status(VirtIODevice *vdev, uint8_t status) |
| { |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); |
| bool should_start = virtio_device_should_start(vdev, status); |
| |
| if (!scmi->connected) { |
| return; |
| } |
| if (vhost_dev_is_started(&scmi->vhost_dev) == should_start) { |
| return; |
| } |
| |
| if (should_start) { |
| vu_scmi_start(vdev); |
| } else { |
| vu_scmi_stop(vdev); |
| } |
| } |
| |
| static uint64_t vu_scmi_get_features(VirtIODevice *vdev, uint64_t features, |
| Error **errp) |
| { |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); |
| |
| return vhost_get_features(&scmi->vhost_dev, feature_bits, features); |
| } |
| |
| static void vu_scmi_handle_output(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| /* |
| * Not normally called; it's the daemon that handles the queue; |
| * however virtio's cleanup path can call this. |
| */ |
| } |
| |
| static void vu_scmi_guest_notifier_mask(VirtIODevice *vdev, int idx, bool mask) |
| { |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); |
| |
| if (idx == VIRTIO_CONFIG_IRQ_IDX) { |
| return; |
| } |
| |
| vhost_virtqueue_mask(&scmi->vhost_dev, vdev, idx, mask); |
| } |
| |
| static bool vu_scmi_guest_notifier_pending(VirtIODevice *vdev, int idx) |
| { |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); |
| |
| return vhost_virtqueue_pending(&scmi->vhost_dev, idx); |
| } |
| |
| static void vu_scmi_connect(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); |
| |
| if (scmi->connected) { |
| return; |
| } |
| scmi->connected = true; |
| |
| /* restore vhost state */ |
| if (virtio_device_started(vdev, vdev->status)) { |
| vu_scmi_start(vdev); |
| } |
| } |
| |
| static void vu_scmi_disconnect(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); |
| |
| if (!scmi->connected) { |
| return; |
| } |
| scmi->connected = false; |
| |
| if (vhost_dev_is_started(&scmi->vhost_dev)) { |
| vu_scmi_stop(vdev); |
| } |
| } |
| |
| static void vu_scmi_event(void *opaque, QEMUChrEvent event) |
| { |
| DeviceState *dev = opaque; |
| |
| switch (event) { |
| case CHR_EVENT_OPENED: |
| vu_scmi_connect(dev); |
| break; |
| case CHR_EVENT_CLOSED: |
| vu_scmi_disconnect(dev); |
| break; |
| case CHR_EVENT_BREAK: |
| case CHR_EVENT_MUX_IN: |
| case CHR_EVENT_MUX_OUT: |
| /* Ignore */ |
| break; |
| } |
| } |
| |
| static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserSCMI *scmi) |
| { |
| virtio_delete_queue(scmi->cmd_vq); |
| virtio_delete_queue(scmi->event_vq); |
| g_free(scmi->vhost_dev.vqs); |
| virtio_cleanup(vdev); |
| vhost_user_cleanup(&scmi->vhost_user); |
| } |
| |
| static void vu_scmi_device_realize(DeviceState *dev, Error **errp) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(dev); |
| int ret; |
| |
| if (!scmi->chardev.chr) { |
| error_setg(errp, "vhost-user-scmi: chardev is mandatory"); |
| return; |
| } |
| |
| vdev->host_features |= (1ULL << VIRTIO_SCMI_F_P2A_CHANNELS); |
| |
| if (!vhost_user_init(&scmi->vhost_user, &scmi->chardev, errp)) { |
| return; |
| } |
| |
| virtio_init(vdev, VIRTIO_ID_SCMI, 0); |
| |
| scmi->cmd_vq = virtio_add_queue(vdev, 256, vu_scmi_handle_output); |
| scmi->event_vq = virtio_add_queue(vdev, 256, vu_scmi_handle_output); |
| scmi->vhost_dev.nvqs = 2; |
| scmi->vhost_dev.vqs = g_new0(struct vhost_virtqueue, scmi->vhost_dev.nvqs); |
| |
| ret = vhost_dev_init(&scmi->vhost_dev, &scmi->vhost_user, |
| VHOST_BACKEND_TYPE_USER, 0, errp); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, |
| "vhost-user-scmi: vhost_dev_init() failed"); |
| do_vhost_user_cleanup(vdev, scmi); |
| return; |
| } |
| |
| qemu_chr_fe_set_handlers(&scmi->chardev, NULL, NULL, vu_scmi_event, NULL, |
| dev, NULL, true); |
| |
| return; |
| } |
| |
| static void vu_scmi_device_unrealize(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserSCMI *scmi = VHOST_USER_SCMI(dev); |
| |
| vu_scmi_set_status(vdev, 0); |
| vhost_dev_cleanup(&scmi->vhost_dev); |
| do_vhost_user_cleanup(vdev, scmi); |
| } |
| |
| static const VMStateDescription vu_scmi_vmstate = { |
| .name = "vhost-user-scmi", |
| .unmigratable = 1, |
| }; |
| |
| static Property vu_scmi_properties[] = { |
| DEFINE_PROP_CHR("chardev", VHostUserSCMI, chardev), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void vu_scmi_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); |
| |
| device_class_set_props(dc, vu_scmi_properties); |
| dc->vmsd = &vu_scmi_vmstate; |
| set_bit(DEVICE_CATEGORY_INPUT, dc->categories); |
| vdc->realize = vu_scmi_device_realize; |
| vdc->unrealize = vu_scmi_device_unrealize; |
| vdc->get_features = vu_scmi_get_features; |
| vdc->set_status = vu_scmi_set_status; |
| vdc->guest_notifier_mask = vu_scmi_guest_notifier_mask; |
| vdc->guest_notifier_pending = vu_scmi_guest_notifier_pending; |
| } |
| |
| static const TypeInfo vu_scmi_info = { |
| .name = TYPE_VHOST_USER_SCMI, |
| .parent = TYPE_VIRTIO_DEVICE, |
| .instance_size = sizeof(VHostUserSCMI), |
| .class_init = vu_scmi_class_init, |
| }; |
| |
| static void vu_scmi_register_types(void) |
| { |
| type_register_static(&vu_scmi_info); |
| } |
| |
| type_init(vu_scmi_register_types) |