| /* |
| * Block driver for the QCOW version 2 format |
| * |
| * Copyright (c) 2004-2006 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include <zlib.h> |
| |
| #include "qapi/error.h" |
| #include "qcow2.h" |
| #include "qemu/bswap.h" |
| #include "trace.h" |
| |
| int qcow2_shrink_l1_table(BlockDriverState *bs, uint64_t exact_size) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int new_l1_size, i, ret; |
| |
| if (exact_size >= s->l1_size) { |
| return 0; |
| } |
| |
| new_l1_size = exact_size; |
| |
| #ifdef DEBUG_ALLOC2 |
| fprintf(stderr, "shrink l1_table from %d to %d\n", s->l1_size, new_l1_size); |
| #endif |
| |
| BLKDBG_EVENT(bs->file, BLKDBG_L1_SHRINK_WRITE_TABLE); |
| ret = bdrv_pwrite_zeroes(bs->file, s->l1_table_offset + |
| new_l1_size * L1E_SIZE, |
| (s->l1_size - new_l1_size) * L1E_SIZE, 0); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| ret = bdrv_flush(bs->file->bs); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| BLKDBG_EVENT(bs->file, BLKDBG_L1_SHRINK_FREE_L2_CLUSTERS); |
| for (i = s->l1_size - 1; i > new_l1_size - 1; i--) { |
| if ((s->l1_table[i] & L1E_OFFSET_MASK) == 0) { |
| continue; |
| } |
| qcow2_free_clusters(bs, s->l1_table[i] & L1E_OFFSET_MASK, |
| s->cluster_size, QCOW2_DISCARD_ALWAYS); |
| s->l1_table[i] = 0; |
| } |
| return 0; |
| |
| fail: |
| /* |
| * If the write in the l1_table failed the image may contain a partially |
| * overwritten l1_table. In this case it would be better to clear the |
| * l1_table in memory to avoid possible image corruption. |
| */ |
| memset(s->l1_table + new_l1_size, 0, |
| (s->l1_size - new_l1_size) * L1E_SIZE); |
| return ret; |
| } |
| |
| int qcow2_grow_l1_table(BlockDriverState *bs, uint64_t min_size, |
| bool exact_size) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int new_l1_size2, ret, i; |
| uint64_t *new_l1_table; |
| int64_t old_l1_table_offset, old_l1_size; |
| int64_t new_l1_table_offset, new_l1_size; |
| uint8_t data[12]; |
| |
| if (min_size <= s->l1_size) |
| return 0; |
| |
| /* Do a sanity check on min_size before trying to calculate new_l1_size |
| * (this prevents overflows during the while loop for the calculation of |
| * new_l1_size) */ |
| if (min_size > INT_MAX / L1E_SIZE) { |
| return -EFBIG; |
| } |
| |
| if (exact_size) { |
| new_l1_size = min_size; |
| } else { |
| /* Bump size up to reduce the number of times we have to grow */ |
| new_l1_size = s->l1_size; |
| if (new_l1_size == 0) { |
| new_l1_size = 1; |
| } |
| while (min_size > new_l1_size) { |
| new_l1_size = DIV_ROUND_UP(new_l1_size * 3, 2); |
| } |
| } |
| |
| QEMU_BUILD_BUG_ON(QCOW_MAX_L1_SIZE > INT_MAX); |
| if (new_l1_size > QCOW_MAX_L1_SIZE / L1E_SIZE) { |
| return -EFBIG; |
| } |
| |
| #ifdef DEBUG_ALLOC2 |
| fprintf(stderr, "grow l1_table from %d to %" PRId64 "\n", |
| s->l1_size, new_l1_size); |
| #endif |
| |
| new_l1_size2 = L1E_SIZE * new_l1_size; |
| new_l1_table = qemu_try_blockalign(bs->file->bs, new_l1_size2); |
| if (new_l1_table == NULL) { |
| return -ENOMEM; |
| } |
| memset(new_l1_table, 0, new_l1_size2); |
| |
| if (s->l1_size) { |
| memcpy(new_l1_table, s->l1_table, s->l1_size * L1E_SIZE); |
| } |
| |
| /* write new table (align to cluster) */ |
| BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ALLOC_TABLE); |
| new_l1_table_offset = qcow2_alloc_clusters(bs, new_l1_size2); |
| if (new_l1_table_offset < 0) { |
| qemu_vfree(new_l1_table); |
| return new_l1_table_offset; |
| } |
| |
| ret = qcow2_cache_flush(bs, s->refcount_block_cache); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| /* the L1 position has not yet been updated, so these clusters must |
| * indeed be completely free */ |
| ret = qcow2_pre_write_overlap_check(bs, 0, new_l1_table_offset, |
| new_l1_size2, false); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_WRITE_TABLE); |
| for(i = 0; i < s->l1_size; i++) |
| new_l1_table[i] = cpu_to_be64(new_l1_table[i]); |
| ret = bdrv_pwrite_sync(bs->file, new_l1_table_offset, |
| new_l1_table, new_l1_size2); |
| if (ret < 0) |
| goto fail; |
| for(i = 0; i < s->l1_size; i++) |
| new_l1_table[i] = be64_to_cpu(new_l1_table[i]); |
| |
| /* set new table */ |
| BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ACTIVATE_TABLE); |
| stl_be_p(data, new_l1_size); |
| stq_be_p(data + 4, new_l1_table_offset); |
| ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, l1_size), |
| data, sizeof(data)); |
| if (ret < 0) { |
| goto fail; |
| } |
| qemu_vfree(s->l1_table); |
| old_l1_table_offset = s->l1_table_offset; |
| s->l1_table_offset = new_l1_table_offset; |
| s->l1_table = new_l1_table; |
| old_l1_size = s->l1_size; |
| s->l1_size = new_l1_size; |
| qcow2_free_clusters(bs, old_l1_table_offset, old_l1_size * L1E_SIZE, |
| QCOW2_DISCARD_OTHER); |
| return 0; |
| fail: |
| qemu_vfree(new_l1_table); |
| qcow2_free_clusters(bs, new_l1_table_offset, new_l1_size2, |
| QCOW2_DISCARD_OTHER); |
| return ret; |
| } |
| |
| /* |
| * l2_load |
| * |
| * @bs: The BlockDriverState |
| * @offset: A guest offset, used to calculate what slice of the L2 |
| * table to load. |
| * @l2_offset: Offset to the L2 table in the image file. |
| * @l2_slice: Location to store the pointer to the L2 slice. |
| * |
| * Loads a L2 slice into memory (L2 slices are the parts of L2 tables |
| * that are loaded by the qcow2 cache). If the slice is in the cache, |
| * the cache is used; otherwise the L2 slice is loaded from the image |
| * file. |
| */ |
| static int l2_load(BlockDriverState *bs, uint64_t offset, |
| uint64_t l2_offset, uint64_t **l2_slice) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int start_of_slice = l2_entry_size(s) * |
| (offset_to_l2_index(s, offset) - offset_to_l2_slice_index(s, offset)); |
| |
| return qcow2_cache_get(bs, s->l2_table_cache, l2_offset + start_of_slice, |
| (void **)l2_slice); |
| } |
| |
| /* |
| * Writes an L1 entry to disk (note that depending on the alignment |
| * requirements this function may write more that just one entry in |
| * order to prevent bdrv_pwrite from performing a read-modify-write) |
| */ |
| int qcow2_write_l1_entry(BlockDriverState *bs, int l1_index) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int l1_start_index; |
| int i, ret; |
| int bufsize = MAX(L1E_SIZE, |
| MIN(bs->file->bs->bl.request_alignment, s->cluster_size)); |
| int nentries = bufsize / L1E_SIZE; |
| g_autofree uint64_t *buf = g_try_new0(uint64_t, nentries); |
| |
| if (buf == NULL) { |
| return -ENOMEM; |
| } |
| |
| l1_start_index = QEMU_ALIGN_DOWN(l1_index, nentries); |
| for (i = 0; i < MIN(nentries, s->l1_size - l1_start_index); i++) { |
| buf[i] = cpu_to_be64(s->l1_table[l1_start_index + i]); |
| } |
| |
| ret = qcow2_pre_write_overlap_check(bs, QCOW2_OL_ACTIVE_L1, |
| s->l1_table_offset + 8 * l1_start_index, bufsize, false); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| BLKDBG_EVENT(bs->file, BLKDBG_L1_UPDATE); |
| ret = bdrv_pwrite_sync(bs->file, |
| s->l1_table_offset + 8 * l1_start_index, |
| buf, bufsize); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * l2_allocate |
| * |
| * Allocate a new l2 entry in the file. If l1_index points to an already |
| * used entry in the L2 table (i.e. we are doing a copy on write for the L2 |
| * table) copy the contents of the old L2 table into the newly allocated one. |
| * Otherwise the new table is initialized with zeros. |
| * |
| */ |
| |
| static int l2_allocate(BlockDriverState *bs, int l1_index) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t old_l2_offset; |
| uint64_t *l2_slice = NULL; |
| unsigned slice, slice_size2, n_slices; |
| int64_t l2_offset; |
| int ret; |
| |
| old_l2_offset = s->l1_table[l1_index]; |
| |
| trace_qcow2_l2_allocate(bs, l1_index); |
| |
| /* allocate a new l2 entry */ |
| |
| l2_offset = qcow2_alloc_clusters(bs, s->l2_size * l2_entry_size(s)); |
| if (l2_offset < 0) { |
| ret = l2_offset; |
| goto fail; |
| } |
| |
| /* The offset must fit in the offset field of the L1 table entry */ |
| assert((l2_offset & L1E_OFFSET_MASK) == l2_offset); |
| |
| /* If we're allocating the table at offset 0 then something is wrong */ |
| if (l2_offset == 0) { |
| qcow2_signal_corruption(bs, true, -1, -1, "Preventing invalid " |
| "allocation of L2 table at offset 0"); |
| ret = -EIO; |
| goto fail; |
| } |
| |
| ret = qcow2_cache_flush(bs, s->refcount_block_cache); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| /* allocate a new entry in the l2 cache */ |
| |
| slice_size2 = s->l2_slice_size * l2_entry_size(s); |
| n_slices = s->cluster_size / slice_size2; |
| |
| trace_qcow2_l2_allocate_get_empty(bs, l1_index); |
| for (slice = 0; slice < n_slices; slice++) { |
| ret = qcow2_cache_get_empty(bs, s->l2_table_cache, |
| l2_offset + slice * slice_size2, |
| (void **) &l2_slice); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| if ((old_l2_offset & L1E_OFFSET_MASK) == 0) { |
| /* if there was no old l2 table, clear the new slice */ |
| memset(l2_slice, 0, slice_size2); |
| } else { |
| uint64_t *old_slice; |
| uint64_t old_l2_slice_offset = |
| (old_l2_offset & L1E_OFFSET_MASK) + slice * slice_size2; |
| |
| /* if there was an old l2 table, read a slice from the disk */ |
| BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_COW_READ); |
| ret = qcow2_cache_get(bs, s->l2_table_cache, old_l2_slice_offset, |
| (void **) &old_slice); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| memcpy(l2_slice, old_slice, slice_size2); |
| |
| qcow2_cache_put(s->l2_table_cache, (void **) &old_slice); |
| } |
| |
| /* write the l2 slice to the file */ |
| BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_WRITE); |
| |
| trace_qcow2_l2_allocate_write_l2(bs, l1_index); |
| qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| } |
| |
| ret = qcow2_cache_flush(bs, s->l2_table_cache); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| /* update the L1 entry */ |
| trace_qcow2_l2_allocate_write_l1(bs, l1_index); |
| s->l1_table[l1_index] = l2_offset | QCOW_OFLAG_COPIED; |
| ret = qcow2_write_l1_entry(bs, l1_index); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| trace_qcow2_l2_allocate_done(bs, l1_index, 0); |
| return 0; |
| |
| fail: |
| trace_qcow2_l2_allocate_done(bs, l1_index, ret); |
| if (l2_slice != NULL) { |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| } |
| s->l1_table[l1_index] = old_l2_offset; |
| if (l2_offset > 0) { |
| qcow2_free_clusters(bs, l2_offset, s->l2_size * l2_entry_size(s), |
| QCOW2_DISCARD_ALWAYS); |
| } |
| return ret; |
| } |
| |
| /* |
| * For a given L2 entry, count the number of contiguous subclusters of |
| * the same type starting from @sc_from. Compressed clusters are |
| * treated as if they were divided into subclusters of size |
| * s->subcluster_size. |
| * |
| * Return the number of contiguous subclusters and set @type to the |
| * subcluster type. |
| * |
| * If the L2 entry is invalid return -errno and set @type to |
| * QCOW2_SUBCLUSTER_INVALID. |
| */ |
| static int qcow2_get_subcluster_range_type(BlockDriverState *bs, |
| uint64_t l2_entry, |
| uint64_t l2_bitmap, |
| unsigned sc_from, |
| QCow2SubclusterType *type) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint32_t val; |
| |
| *type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_from); |
| |
| if (*type == QCOW2_SUBCLUSTER_INVALID) { |
| return -EINVAL; |
| } else if (!has_subclusters(s) || *type == QCOW2_SUBCLUSTER_COMPRESSED) { |
| return s->subclusters_per_cluster - sc_from; |
| } |
| |
| switch (*type) { |
| case QCOW2_SUBCLUSTER_NORMAL: |
| val = l2_bitmap | QCOW_OFLAG_SUB_ALLOC_RANGE(0, sc_from); |
| return cto32(val) - sc_from; |
| |
| case QCOW2_SUBCLUSTER_ZERO_PLAIN: |
| case QCOW2_SUBCLUSTER_ZERO_ALLOC: |
| val = (l2_bitmap | QCOW_OFLAG_SUB_ZERO_RANGE(0, sc_from)) >> 32; |
| return cto32(val) - sc_from; |
| |
| case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: |
| val = ((l2_bitmap >> 32) | l2_bitmap) |
| & ~QCOW_OFLAG_SUB_ALLOC_RANGE(0, sc_from); |
| return ctz32(val) - sc_from; |
| |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| /* |
| * Return the number of contiguous subclusters of the exact same type |
| * in a given L2 slice, starting from cluster @l2_index, subcluster |
| * @sc_index. Allocated subclusters are required to be contiguous in |
| * the image file. |
| * At most @nb_clusters are checked (note that this means clusters, |
| * not subclusters). |
| * Compressed clusters are always processed one by one but for the |
| * purpose of this count they are treated as if they were divided into |
| * subclusters of size s->subcluster_size. |
| * On failure return -errno and update @l2_index to point to the |
| * invalid entry. |
| */ |
| static int count_contiguous_subclusters(BlockDriverState *bs, int nb_clusters, |
| unsigned sc_index, uint64_t *l2_slice, |
| unsigned *l2_index) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int i, count = 0; |
| bool check_offset = false; |
| uint64_t expected_offset = 0; |
| QCow2SubclusterType expected_type = QCOW2_SUBCLUSTER_NORMAL, type; |
| |
| assert(*l2_index + nb_clusters <= s->l2_slice_size); |
| |
| for (i = 0; i < nb_clusters; i++) { |
| unsigned first_sc = (i == 0) ? sc_index : 0; |
| uint64_t l2_entry = get_l2_entry(s, l2_slice, *l2_index + i); |
| uint64_t l2_bitmap = get_l2_bitmap(s, l2_slice, *l2_index + i); |
| int ret = qcow2_get_subcluster_range_type(bs, l2_entry, l2_bitmap, |
| first_sc, &type); |
| if (ret < 0) { |
| *l2_index += i; /* Point to the invalid entry */ |
| return -EIO; |
| } |
| if (i == 0) { |
| if (type == QCOW2_SUBCLUSTER_COMPRESSED) { |
| /* Compressed clusters are always processed one by one */ |
| return ret; |
| } |
| expected_type = type; |
| expected_offset = l2_entry & L2E_OFFSET_MASK; |
| check_offset = (type == QCOW2_SUBCLUSTER_NORMAL || |
| type == QCOW2_SUBCLUSTER_ZERO_ALLOC || |
| type == QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC); |
| } else if (type != expected_type) { |
| break; |
| } else if (check_offset) { |
| expected_offset += s->cluster_size; |
| if (expected_offset != (l2_entry & L2E_OFFSET_MASK)) { |
| break; |
| } |
| } |
| count += ret; |
| /* Stop if there are type changes before the end of the cluster */ |
| if (first_sc + ret < s->subclusters_per_cluster) { |
| break; |
| } |
| } |
| |
| return count; |
| } |
| |
| static int coroutine_fn do_perform_cow_read(BlockDriverState *bs, |
| uint64_t src_cluster_offset, |
| unsigned offset_in_cluster, |
| QEMUIOVector *qiov) |
| { |
| int ret; |
| |
| if (qiov->size == 0) { |
| return 0; |
| } |
| |
| BLKDBG_EVENT(bs->file, BLKDBG_COW_READ); |
| |
| if (!bs->drv) { |
| return -ENOMEDIUM; |
| } |
| |
| /* Call .bdrv_co_readv() directly instead of using the public block-layer |
| * interface. This avoids double I/O throttling and request tracking, |
| * which can lead to deadlock when block layer copy-on-read is enabled. |
| */ |
| ret = bs->drv->bdrv_co_preadv_part(bs, |
| src_cluster_offset + offset_in_cluster, |
| qiov->size, qiov, 0, 0); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int coroutine_fn do_perform_cow_write(BlockDriverState *bs, |
| uint64_t cluster_offset, |
| unsigned offset_in_cluster, |
| QEMUIOVector *qiov) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int ret; |
| |
| if (qiov->size == 0) { |
| return 0; |
| } |
| |
| ret = qcow2_pre_write_overlap_check(bs, 0, |
| cluster_offset + offset_in_cluster, qiov->size, true); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| BLKDBG_EVENT(bs->file, BLKDBG_COW_WRITE); |
| ret = bdrv_co_pwritev(s->data_file, cluster_offset + offset_in_cluster, |
| qiov->size, qiov, 0); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| |
| /* |
| * get_host_offset |
| * |
| * For a given offset of the virtual disk find the equivalent host |
| * offset in the qcow2 file and store it in *host_offset. Neither |
| * offset needs to be aligned to a cluster boundary. |
| * |
| * If the cluster is unallocated then *host_offset will be 0. |
| * If the cluster is compressed then *host_offset will contain the |
| * complete compressed cluster descriptor. |
| * |
| * On entry, *bytes is the maximum number of contiguous bytes starting at |
| * offset that we are interested in. |
| * |
| * On exit, *bytes is the number of bytes starting at offset that have the same |
| * subcluster type and (if applicable) are stored contiguously in the image |
| * file. The subcluster type is stored in *subcluster_type. |
| * Compressed clusters are always processed one by one. |
| * |
| * Returns 0 on success, -errno in error cases. |
| */ |
| int qcow2_get_host_offset(BlockDriverState *bs, uint64_t offset, |
| unsigned int *bytes, uint64_t *host_offset, |
| QCow2SubclusterType *subcluster_type) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| unsigned int l2_index, sc_index; |
| uint64_t l1_index, l2_offset, *l2_slice, l2_entry, l2_bitmap; |
| int sc; |
| unsigned int offset_in_cluster; |
| uint64_t bytes_available, bytes_needed, nb_clusters; |
| QCow2SubclusterType type; |
| int ret; |
| |
| offset_in_cluster = offset_into_cluster(s, offset); |
| bytes_needed = (uint64_t) *bytes + offset_in_cluster; |
| |
| /* compute how many bytes there are between the start of the cluster |
| * containing offset and the end of the l2 slice that contains |
| * the entry pointing to it */ |
| bytes_available = |
| ((uint64_t) (s->l2_slice_size - offset_to_l2_slice_index(s, offset))) |
| << s->cluster_bits; |
| |
| if (bytes_needed > bytes_available) { |
| bytes_needed = bytes_available; |
| } |
| |
| *host_offset = 0; |
| |
| /* seek to the l2 offset in the l1 table */ |
| |
| l1_index = offset_to_l1_index(s, offset); |
| if (l1_index >= s->l1_size) { |
| type = QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN; |
| goto out; |
| } |
| |
| l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK; |
| if (!l2_offset) { |
| type = QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN; |
| goto out; |
| } |
| |
| if (offset_into_cluster(s, l2_offset)) { |
| qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" PRIx64 |
| " unaligned (L1 index: %#" PRIx64 ")", |
| l2_offset, l1_index); |
| return -EIO; |
| } |
| |
| /* load the l2 slice in memory */ |
| |
| ret = l2_load(bs, offset, l2_offset, &l2_slice); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* find the cluster offset for the given disk offset */ |
| |
| l2_index = offset_to_l2_slice_index(s, offset); |
| sc_index = offset_to_sc_index(s, offset); |
| l2_entry = get_l2_entry(s, l2_slice, l2_index); |
| l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index); |
| |
| nb_clusters = size_to_clusters(s, bytes_needed); |
| /* bytes_needed <= *bytes + offset_in_cluster, both of which are unsigned |
| * integers; the minimum cluster size is 512, so this assertion is always |
| * true */ |
| assert(nb_clusters <= INT_MAX); |
| |
| type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index); |
| if (s->qcow_version < 3 && (type == QCOW2_SUBCLUSTER_ZERO_PLAIN || |
| type == QCOW2_SUBCLUSTER_ZERO_ALLOC)) { |
| qcow2_signal_corruption(bs, true, -1, -1, "Zero cluster entry found" |
| " in pre-v3 image (L2 offset: %#" PRIx64 |
| ", L2 index: %#x)", l2_offset, l2_index); |
| ret = -EIO; |
| goto fail; |
| } |
| switch (type) { |
| case QCOW2_SUBCLUSTER_INVALID: |
| break; /* This is handled by count_contiguous_subclusters() below */ |
| case QCOW2_SUBCLUSTER_COMPRESSED: |
| if (has_data_file(bs)) { |
| qcow2_signal_corruption(bs, true, -1, -1, "Compressed cluster " |
| "entry found in image with external data " |
| "file (L2 offset: %#" PRIx64 ", L2 index: " |
| "%#x)", l2_offset, l2_index); |
| ret = -EIO; |
| goto fail; |
| } |
| *host_offset = l2_entry & L2E_COMPRESSED_OFFSET_SIZE_MASK; |
| break; |
| case QCOW2_SUBCLUSTER_ZERO_PLAIN: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN: |
| break; |
| case QCOW2_SUBCLUSTER_ZERO_ALLOC: |
| case QCOW2_SUBCLUSTER_NORMAL: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: { |
| uint64_t host_cluster_offset = l2_entry & L2E_OFFSET_MASK; |
| *host_offset = host_cluster_offset + offset_in_cluster; |
| if (offset_into_cluster(s, host_cluster_offset)) { |
| qcow2_signal_corruption(bs, true, -1, -1, |
| "Cluster allocation offset %#" |
| PRIx64 " unaligned (L2 offset: %#" PRIx64 |
| ", L2 index: %#x)", host_cluster_offset, |
| l2_offset, l2_index); |
| ret = -EIO; |
| goto fail; |
| } |
| if (has_data_file(bs) && *host_offset != offset) { |
| qcow2_signal_corruption(bs, true, -1, -1, |
| "External data file host cluster offset %#" |
| PRIx64 " does not match guest cluster " |
| "offset: %#" PRIx64 |
| ", L2 index: %#x)", host_cluster_offset, |
| offset - offset_in_cluster, l2_index); |
| ret = -EIO; |
| goto fail; |
| } |
| break; |
| } |
| default: |
| abort(); |
| } |
| |
| sc = count_contiguous_subclusters(bs, nb_clusters, sc_index, |
| l2_slice, &l2_index); |
| if (sc < 0) { |
| qcow2_signal_corruption(bs, true, -1, -1, "Invalid cluster entry found " |
| " (L2 offset: %#" PRIx64 ", L2 index: %#x)", |
| l2_offset, l2_index); |
| ret = -EIO; |
| goto fail; |
| } |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| |
| bytes_available = ((int64_t)sc + sc_index) << s->subcluster_bits; |
| |
| out: |
| if (bytes_available > bytes_needed) { |
| bytes_available = bytes_needed; |
| } |
| |
| /* bytes_available <= bytes_needed <= *bytes + offset_in_cluster; |
| * subtracting offset_in_cluster will therefore definitely yield something |
| * not exceeding UINT_MAX */ |
| assert(bytes_available - offset_in_cluster <= UINT_MAX); |
| *bytes = bytes_available - offset_in_cluster; |
| |
| *subcluster_type = type; |
| |
| return 0; |
| |
| fail: |
| qcow2_cache_put(s->l2_table_cache, (void **)&l2_slice); |
| return ret; |
| } |
| |
| /* |
| * get_cluster_table |
| * |
| * for a given disk offset, load (and allocate if needed) |
| * the appropriate slice of its l2 table. |
| * |
| * the cluster index in the l2 slice is given to the caller. |
| * |
| * Returns 0 on success, -errno in failure case |
| */ |
| static int get_cluster_table(BlockDriverState *bs, uint64_t offset, |
| uint64_t **new_l2_slice, |
| int *new_l2_index) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| unsigned int l2_index; |
| uint64_t l1_index, l2_offset; |
| uint64_t *l2_slice = NULL; |
| int ret; |
| |
| /* seek to the l2 offset in the l1 table */ |
| |
| l1_index = offset_to_l1_index(s, offset); |
| if (l1_index >= s->l1_size) { |
| ret = qcow2_grow_l1_table(bs, l1_index + 1, false); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| |
| assert(l1_index < s->l1_size); |
| l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK; |
| if (offset_into_cluster(s, l2_offset)) { |
| qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" PRIx64 |
| " unaligned (L1 index: %#" PRIx64 ")", |
| l2_offset, l1_index); |
| return -EIO; |
| } |
| |
| if (!(s->l1_table[l1_index] & QCOW_OFLAG_COPIED)) { |
| /* First allocate a new L2 table (and do COW if needed) */ |
| ret = l2_allocate(bs, l1_index); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* Then decrease the refcount of the old table */ |
| if (l2_offset) { |
| qcow2_free_clusters(bs, l2_offset, s->l2_size * l2_entry_size(s), |
| QCOW2_DISCARD_OTHER); |
| } |
| |
| /* Get the offset of the newly-allocated l2 table */ |
| l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK; |
| assert(offset_into_cluster(s, l2_offset) == 0); |
| } |
| |
| /* load the l2 slice in memory */ |
| ret = l2_load(bs, offset, l2_offset, &l2_slice); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* find the cluster offset for the given disk offset */ |
| |
| l2_index = offset_to_l2_slice_index(s, offset); |
| |
| *new_l2_slice = l2_slice; |
| *new_l2_index = l2_index; |
| |
| return 0; |
| } |
| |
| /* |
| * alloc_compressed_cluster_offset |
| * |
| * For a given offset on the virtual disk, allocate a new compressed cluster |
| * and put the host offset of the cluster into *host_offset. If a cluster is |
| * already allocated at the offset, return an error. |
| * |
| * Return 0 on success and -errno in error cases |
| */ |
| int qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs, |
| uint64_t offset, |
| int compressed_size, |
| uint64_t *host_offset) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int l2_index, ret; |
| uint64_t *l2_slice; |
| int64_t cluster_offset; |
| int nb_csectors; |
| |
| if (has_data_file(bs)) { |
| return 0; |
| } |
| |
| ret = get_cluster_table(bs, offset, &l2_slice, &l2_index); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* Compression can't overwrite anything. Fail if the cluster was already |
| * allocated. */ |
| cluster_offset = get_l2_entry(s, l2_slice, l2_index); |
| if (cluster_offset & L2E_OFFSET_MASK) { |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| return -EIO; |
| } |
| |
| cluster_offset = qcow2_alloc_bytes(bs, compressed_size); |
| if (cluster_offset < 0) { |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| return cluster_offset; |
| } |
| |
| nb_csectors = |
| (cluster_offset + compressed_size - 1) / QCOW2_COMPRESSED_SECTOR_SIZE - |
| (cluster_offset / QCOW2_COMPRESSED_SECTOR_SIZE); |
| |
| /* The offset and size must fit in their fields of the L2 table entry */ |
| assert((cluster_offset & s->cluster_offset_mask) == cluster_offset); |
| assert((nb_csectors & s->csize_mask) == nb_csectors); |
| |
| cluster_offset |= QCOW_OFLAG_COMPRESSED | |
| ((uint64_t)nb_csectors << s->csize_shift); |
| |
| /* update L2 table */ |
| |
| /* compressed clusters never have the copied flag */ |
| |
| BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE_COMPRESSED); |
| qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); |
| set_l2_entry(s, l2_slice, l2_index, cluster_offset); |
| if (has_subclusters(s)) { |
| set_l2_bitmap(s, l2_slice, l2_index, 0); |
| } |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| |
| *host_offset = cluster_offset & s->cluster_offset_mask; |
| return 0; |
| } |
| |
| static int perform_cow(BlockDriverState *bs, QCowL2Meta *m) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| Qcow2COWRegion *start = &m->cow_start; |
| Qcow2COWRegion *end = &m->cow_end; |
| unsigned buffer_size; |
| unsigned data_bytes = end->offset - (start->offset + start->nb_bytes); |
| bool merge_reads; |
| uint8_t *start_buffer, *end_buffer; |
| QEMUIOVector qiov; |
| int ret; |
| |
| assert(start->nb_bytes <= UINT_MAX - end->nb_bytes); |
| assert(start->nb_bytes + end->nb_bytes <= UINT_MAX - data_bytes); |
| assert(start->offset + start->nb_bytes <= end->offset); |
| |
| if ((start->nb_bytes == 0 && end->nb_bytes == 0) || m->skip_cow) { |
| return 0; |
| } |
| |
| /* If we have to read both the start and end COW regions and the |
| * middle region is not too large then perform just one read |
| * operation */ |
| merge_reads = start->nb_bytes && end->nb_bytes && data_bytes <= 16384; |
| if (merge_reads) { |
| buffer_size = start->nb_bytes + data_bytes + end->nb_bytes; |
| } else { |
| /* If we have to do two reads, add some padding in the middle |
| * if necessary to make sure that the end region is optimally |
| * aligned. */ |
| size_t align = bdrv_opt_mem_align(bs); |
| assert(align > 0 && align <= UINT_MAX); |
| assert(QEMU_ALIGN_UP(start->nb_bytes, align) <= |
| UINT_MAX - end->nb_bytes); |
| buffer_size = QEMU_ALIGN_UP(start->nb_bytes, align) + end->nb_bytes; |
| } |
| |
| /* Reserve a buffer large enough to store all the data that we're |
| * going to read */ |
| start_buffer = qemu_try_blockalign(bs, buffer_size); |
| if (start_buffer == NULL) { |
| return -ENOMEM; |
| } |
| /* The part of the buffer where the end region is located */ |
| end_buffer = start_buffer + buffer_size - end->nb_bytes; |
| |
| qemu_iovec_init(&qiov, 2 + (m->data_qiov ? |
| qemu_iovec_subvec_niov(m->data_qiov, |
| m->data_qiov_offset, |
| data_bytes) |
| : 0)); |
| |
| qemu_co_mutex_unlock(&s->lock); |
| /* First we read the existing data from both COW regions. We |
| * either read the whole region in one go, or the start and end |
| * regions separately. */ |
| if (merge_reads) { |
| qemu_iovec_add(&qiov, start_buffer, buffer_size); |
| ret = do_perform_cow_read(bs, m->offset, start->offset, &qiov); |
| } else { |
| qemu_iovec_add(&qiov, start_buffer, start->nb_bytes); |
| ret = do_perform_cow_read(bs, m->offset, start->offset, &qiov); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| qemu_iovec_reset(&qiov); |
| qemu_iovec_add(&qiov, end_buffer, end->nb_bytes); |
| ret = do_perform_cow_read(bs, m->offset, end->offset, &qiov); |
| } |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| /* Encrypt the data if necessary before writing it */ |
| if (bs->encrypted) { |
| ret = qcow2_co_encrypt(bs, |
| m->alloc_offset + start->offset, |
| m->offset + start->offset, |
| start_buffer, start->nb_bytes); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| ret = qcow2_co_encrypt(bs, |
| m->alloc_offset + end->offset, |
| m->offset + end->offset, |
| end_buffer, end->nb_bytes); |
| if (ret < 0) { |
| goto fail; |
| } |
| } |
| |
| /* And now we can write everything. If we have the guest data we |
| * can write everything in one single operation */ |
| if (m->data_qiov) { |
| qemu_iovec_reset(&qiov); |
| if (start->nb_bytes) { |
| qemu_iovec_add(&qiov, start_buffer, start->nb_bytes); |
| } |
| qemu_iovec_concat(&qiov, m->data_qiov, m->data_qiov_offset, data_bytes); |
| if (end->nb_bytes) { |
| qemu_iovec_add(&qiov, end_buffer, end->nb_bytes); |
| } |
| /* NOTE: we have a write_aio blkdebug event here followed by |
| * a cow_write one in do_perform_cow_write(), but there's only |
| * one single I/O operation */ |
| BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO); |
| ret = do_perform_cow_write(bs, m->alloc_offset, start->offset, &qiov); |
| } else { |
| /* If there's no guest data then write both COW regions separately */ |
| qemu_iovec_reset(&qiov); |
| qemu_iovec_add(&qiov, start_buffer, start->nb_bytes); |
| ret = do_perform_cow_write(bs, m->alloc_offset, start->offset, &qiov); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| qemu_iovec_reset(&qiov); |
| qemu_iovec_add(&qiov, end_buffer, end->nb_bytes); |
| ret = do_perform_cow_write(bs, m->alloc_offset, end->offset, &qiov); |
| } |
| |
| fail: |
| qemu_co_mutex_lock(&s->lock); |
| |
| /* |
| * Before we update the L2 table to actually point to the new cluster, we |
| * need to be sure that the refcounts have been increased and COW was |
| * handled. |
| */ |
| if (ret == 0) { |
| qcow2_cache_depends_on_flush(s->l2_table_cache); |
| } |
| |
| qemu_vfree(start_buffer); |
| qemu_iovec_destroy(&qiov); |
| return ret; |
| } |
| |
| int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int i, j = 0, l2_index, ret; |
| uint64_t *old_cluster, *l2_slice; |
| uint64_t cluster_offset = m->alloc_offset; |
| |
| trace_qcow2_cluster_link_l2(qemu_coroutine_self(), m->nb_clusters); |
| assert(m->nb_clusters > 0); |
| |
| old_cluster = g_try_new(uint64_t, m->nb_clusters); |
| if (old_cluster == NULL) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| /* copy content of unmodified sectors */ |
| ret = perform_cow(bs, m); |
| if (ret < 0) { |
| goto err; |
| } |
| |
| /* Update L2 table. */ |
| if (s->use_lazy_refcounts) { |
| qcow2_mark_dirty(bs); |
| } |
| if (qcow2_need_accurate_refcounts(s)) { |
| qcow2_cache_set_dependency(bs, s->l2_table_cache, |
| s->refcount_block_cache); |
| } |
| |
| ret = get_cluster_table(bs, m->offset, &l2_slice, &l2_index); |
| if (ret < 0) { |
| goto err; |
| } |
| qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); |
| |
| assert(l2_index + m->nb_clusters <= s->l2_slice_size); |
| for (i = 0; i < m->nb_clusters; i++) { |
| uint64_t offset = cluster_offset + ((uint64_t)i << s->cluster_bits); |
| /* if two concurrent writes happen to the same unallocated cluster |
| * each write allocates separate cluster and writes data concurrently. |
| * The first one to complete updates l2 table with pointer to its |
| * cluster the second one has to do RMW (which is done above by |
| * perform_cow()), update l2 table with its cluster pointer and free |
| * old cluster. This is what this loop does */ |
| if (get_l2_entry(s, l2_slice, l2_index + i) != 0) { |
| old_cluster[j++] = get_l2_entry(s, l2_slice, l2_index + i); |
| } |
| |
| /* The offset must fit in the offset field of the L2 table entry */ |
| assert((offset & L2E_OFFSET_MASK) == offset); |
| |
| set_l2_entry(s, l2_slice, l2_index + i, offset | QCOW_OFLAG_COPIED); |
| |
| /* Update bitmap with the subclusters that were just written */ |
| if (has_subclusters(s) && !m->prealloc) { |
| uint64_t l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i); |
| unsigned written_from = m->cow_start.offset; |
| unsigned written_to = m->cow_end.offset + m->cow_end.nb_bytes ?: |
| m->nb_clusters << s->cluster_bits; |
| int first_sc, last_sc; |
| /* Narrow written_from and written_to down to the current cluster */ |
| written_from = MAX(written_from, i << s->cluster_bits); |
| written_to = MIN(written_to, (i + 1) << s->cluster_bits); |
| assert(written_from < written_to); |
| first_sc = offset_to_sc_index(s, written_from); |
| last_sc = offset_to_sc_index(s, written_to - 1); |
| l2_bitmap |= QCOW_OFLAG_SUB_ALLOC_RANGE(first_sc, last_sc + 1); |
| l2_bitmap &= ~QCOW_OFLAG_SUB_ZERO_RANGE(first_sc, last_sc + 1); |
| set_l2_bitmap(s, l2_slice, l2_index + i, l2_bitmap); |
| } |
| } |
| |
| |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| |
| /* |
| * If this was a COW, we need to decrease the refcount of the old cluster. |
| * |
| * Don't discard clusters that reach a refcount of 0 (e.g. compressed |
| * clusters), the next write will reuse them anyway. |
| */ |
| if (!m->keep_old_clusters && j != 0) { |
| for (i = 0; i < j; i++) { |
| qcow2_free_any_cluster(bs, old_cluster[i], QCOW2_DISCARD_NEVER); |
| } |
| } |
| |
| ret = 0; |
| err: |
| g_free(old_cluster); |
| return ret; |
| } |
| |
| /** |
| * Frees the allocated clusters because the request failed and they won't |
| * actually be linked. |
| */ |
| void qcow2_alloc_cluster_abort(BlockDriverState *bs, QCowL2Meta *m) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| if (!has_data_file(bs) && !m->keep_old_clusters) { |
| qcow2_free_clusters(bs, m->alloc_offset, |
| m->nb_clusters << s->cluster_bits, |
| QCOW2_DISCARD_NEVER); |
| } |
| } |
| |
| /* |
| * For a given write request, create a new QCowL2Meta structure, add |
| * it to @m and the BDRVQcow2State.cluster_allocs list. If the write |
| * request does not need copy-on-write or changes to the L2 metadata |
| * then this function does nothing. |
| * |
| * @host_cluster_offset points to the beginning of the first cluster. |
| * |
| * @guest_offset and @bytes indicate the offset and length of the |
| * request. |
| * |
| * @l2_slice contains the L2 entries of all clusters involved in this |
| * write request. |
| * |
| * If @keep_old is true it means that the clusters were already |
| * allocated and will be overwritten. If false then the clusters are |
| * new and we have to decrease the reference count of the old ones. |
| * |
| * Returns 0 on success, -errno on failure. |
| */ |
| static int calculate_l2_meta(BlockDriverState *bs, uint64_t host_cluster_offset, |
| uint64_t guest_offset, unsigned bytes, |
| uint64_t *l2_slice, QCowL2Meta **m, bool keep_old) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int sc_index, l2_index = offset_to_l2_slice_index(s, guest_offset); |
| uint64_t l2_entry, l2_bitmap; |
| unsigned cow_start_from, cow_end_to; |
| unsigned cow_start_to = offset_into_cluster(s, guest_offset); |
| unsigned cow_end_from = cow_start_to + bytes; |
| unsigned nb_clusters = size_to_clusters(s, cow_end_from); |
| QCowL2Meta *old_m = *m; |
| QCow2SubclusterType type; |
| int i; |
| bool skip_cow = keep_old; |
| |
| assert(nb_clusters <= s->l2_slice_size - l2_index); |
| |
| /* Check the type of all affected subclusters */ |
| for (i = 0; i < nb_clusters; i++) { |
| l2_entry = get_l2_entry(s, l2_slice, l2_index + i); |
| l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i); |
| if (skip_cow) { |
| unsigned write_from = MAX(cow_start_to, i << s->cluster_bits); |
| unsigned write_to = MIN(cow_end_from, (i + 1) << s->cluster_bits); |
| int first_sc = offset_to_sc_index(s, write_from); |
| int last_sc = offset_to_sc_index(s, write_to - 1); |
| int cnt = qcow2_get_subcluster_range_type(bs, l2_entry, l2_bitmap, |
| first_sc, &type); |
| /* Is any of the subclusters of type != QCOW2_SUBCLUSTER_NORMAL ? */ |
| if (type != QCOW2_SUBCLUSTER_NORMAL || first_sc + cnt <= last_sc) { |
| skip_cow = false; |
| } |
| } else { |
| /* If we can't skip the cow we can still look for invalid entries */ |
| type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, 0); |
| } |
| if (type == QCOW2_SUBCLUSTER_INVALID) { |
| int l1_index = offset_to_l1_index(s, guest_offset); |
| uint64_t l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK; |
| qcow2_signal_corruption(bs, true, -1, -1, "Invalid cluster " |
| "entry found (L2 offset: %#" PRIx64 |
| ", L2 index: %#x)", |
| l2_offset, l2_index + i); |
| return -EIO; |
| } |
| } |
| |
| if (skip_cow) { |
| return 0; |
| } |
| |
| /* Get the L2 entry of the first cluster */ |
| l2_entry = get_l2_entry(s, l2_slice, l2_index); |
| l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index); |
| sc_index = offset_to_sc_index(s, guest_offset); |
| type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index); |
| |
| if (!keep_old) { |
| switch (type) { |
| case QCOW2_SUBCLUSTER_COMPRESSED: |
| cow_start_from = 0; |
| break; |
| case QCOW2_SUBCLUSTER_NORMAL: |
| case QCOW2_SUBCLUSTER_ZERO_ALLOC: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: |
| if (has_subclusters(s)) { |
| /* Skip all leading zero and unallocated subclusters */ |
| uint32_t alloc_bitmap = l2_bitmap & QCOW_L2_BITMAP_ALL_ALLOC; |
| cow_start_from = |
| MIN(sc_index, ctz32(alloc_bitmap)) << s->subcluster_bits; |
| } else { |
| cow_start_from = 0; |
| } |
| break; |
| case QCOW2_SUBCLUSTER_ZERO_PLAIN: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN: |
| cow_start_from = sc_index << s->subcluster_bits; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } else { |
| switch (type) { |
| case QCOW2_SUBCLUSTER_NORMAL: |
| cow_start_from = cow_start_to; |
| break; |
| case QCOW2_SUBCLUSTER_ZERO_ALLOC: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: |
| cow_start_from = sc_index << s->subcluster_bits; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| /* Get the L2 entry of the last cluster */ |
| l2_index += nb_clusters - 1; |
| l2_entry = get_l2_entry(s, l2_slice, l2_index); |
| l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index); |
| sc_index = offset_to_sc_index(s, guest_offset + bytes - 1); |
| type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index); |
| |
| if (!keep_old) { |
| switch (type) { |
| case QCOW2_SUBCLUSTER_COMPRESSED: |
| cow_end_to = ROUND_UP(cow_end_from, s->cluster_size); |
| break; |
| case QCOW2_SUBCLUSTER_NORMAL: |
| case QCOW2_SUBCLUSTER_ZERO_ALLOC: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: |
| cow_end_to = ROUND_UP(cow_end_from, s->cluster_size); |
| if (has_subclusters(s)) { |
| /* Skip all trailing zero and unallocated subclusters */ |
| uint32_t alloc_bitmap = l2_bitmap & QCOW_L2_BITMAP_ALL_ALLOC; |
| cow_end_to -= |
| MIN(s->subclusters_per_cluster - sc_index - 1, |
| clz32(alloc_bitmap)) << s->subcluster_bits; |
| } |
| break; |
| case QCOW2_SUBCLUSTER_ZERO_PLAIN: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN: |
| cow_end_to = ROUND_UP(cow_end_from, s->subcluster_size); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } else { |
| switch (type) { |
| case QCOW2_SUBCLUSTER_NORMAL: |
| cow_end_to = cow_end_from; |
| break; |
| case QCOW2_SUBCLUSTER_ZERO_ALLOC: |
| case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: |
| cow_end_to = ROUND_UP(cow_end_from, s->subcluster_size); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| *m = g_malloc0(sizeof(**m)); |
| **m = (QCowL2Meta) { |
| .next = old_m, |
| |
| .alloc_offset = host_cluster_offset, |
| .offset = start_of_cluster(s, guest_offset), |
| .nb_clusters = nb_clusters, |
| |
| .keep_old_clusters = keep_old, |
| |
| .cow_start = { |
| .offset = cow_start_from, |
| .nb_bytes = cow_start_to - cow_start_from, |
| }, |
| .cow_end = { |
| .offset = cow_end_from, |
| .nb_bytes = cow_end_to - cow_end_from, |
| }, |
| }; |
| |
| qemu_co_queue_init(&(*m)->dependent_requests); |
| QLIST_INSERT_HEAD(&s->cluster_allocs, *m, next_in_flight); |
| |
| return 0; |
| } |
| |
| /* |
| * Returns true if writing to the cluster pointed to by @l2_entry |
| * requires a new allocation (that is, if the cluster is unallocated |
| * or has refcount > 1 and therefore cannot be written in-place). |
| */ |
| static bool cluster_needs_new_alloc(BlockDriverState *bs, uint64_t l2_entry) |
| { |
| switch (qcow2_get_cluster_type(bs, l2_entry)) { |
| case QCOW2_CLUSTER_NORMAL: |
| case QCOW2_CLUSTER_ZERO_ALLOC: |
| if (l2_entry & QCOW_OFLAG_COPIED) { |
| return false; |
| } |
| /* fallthrough */ |
| case QCOW2_CLUSTER_UNALLOCATED: |
| case QCOW2_CLUSTER_COMPRESSED: |
| case QCOW2_CLUSTER_ZERO_PLAIN: |
| return true; |
| default: |
| abort(); |
| } |
| } |
| |
| /* |
| * Returns the number of contiguous clusters that can be written to |
| * using one single write request, starting from @l2_index. |
| * At most @nb_clusters are checked. |
| * |
| * If @new_alloc is true this counts clusters that are either |
| * unallocated, or allocated but with refcount > 1 (so they need to be |
| * newly allocated and COWed). |
| * |
| * If @new_alloc is false this counts clusters that are already |
| * allocated and can be overwritten in-place (this includes clusters |
| * of type QCOW2_CLUSTER_ZERO_ALLOC). |
| */ |
| static int count_single_write_clusters(BlockDriverState *bs, int nb_clusters, |
| uint64_t *l2_slice, int l2_index, |
| bool new_alloc) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t l2_entry = get_l2_entry(s, l2_slice, l2_index); |
| uint64_t expected_offset = l2_entry & L2E_OFFSET_MASK; |
| int i; |
| |
| for (i = 0; i < nb_clusters; i++) { |
| l2_entry = get_l2_entry(s, l2_slice, l2_index + i); |
| if (cluster_needs_new_alloc(bs, l2_entry) != new_alloc) { |
| break; |
| } |
| if (!new_alloc) { |
| if (expected_offset != (l2_entry & L2E_OFFSET_MASK)) { |
| break; |
| } |
| expected_offset += s->cluster_size; |
| } |
| } |
| |
| assert(i <= nb_clusters); |
| return i; |
| } |
| |
| /* |
| * Check if there already is an AIO write request in flight which allocates |
| * the same cluster. In this case we need to wait until the previous |
| * request has completed and updated the L2 table accordingly. |
| * |
| * Returns: |
| * 0 if there was no dependency. *cur_bytes indicates the number of |
| * bytes from guest_offset that can be read before the next |
| * dependency must be processed (or the request is complete) |
| * |
| * -EAGAIN if we had to wait for another request, previously gathered |
| * information on cluster allocation may be invalid now. The caller |
| * must start over anyway, so consider *cur_bytes undefined. |
| */ |
| static int handle_dependencies(BlockDriverState *bs, uint64_t guest_offset, |
| uint64_t *cur_bytes, QCowL2Meta **m) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| QCowL2Meta *old_alloc; |
| uint64_t bytes = *cur_bytes; |
| |
| QLIST_FOREACH(old_alloc, &s->cluster_allocs, next_in_flight) { |
| |
| uint64_t start = guest_offset; |
| uint64_t end = start + bytes; |
| uint64_t old_start = start_of_cluster(s, l2meta_cow_start(old_alloc)); |
| uint64_t old_end = ROUND_UP(l2meta_cow_end(old_alloc), s->cluster_size); |
| |
| if (end <= old_start || start >= old_end) { |
| /* No intersection */ |
| } else { |
| if (start < old_start) { |
| /* Stop at the start of a running allocation */ |
| bytes = old_start - start; |
| } else { |
| bytes = 0; |
| } |
| |
| /* Stop if already an l2meta exists. After yielding, it wouldn't |
| * be valid any more, so we'd have to clean up the old L2Metas |
| * and deal with requests depending on them before starting to |
| * gather new ones. Not worth the trouble. */ |
| if (bytes == 0 && *m) { |
| *cur_bytes = 0; |
| return 0; |
| } |
| |
| if (bytes == 0) { |
| /* Wait for the dependency to complete. We need to recheck |
| * the free/allocated clusters when we continue. */ |
| qemu_co_queue_wait(&old_alloc->dependent_requests, &s->lock); |
| return -EAGAIN; |
| } |
| } |
| } |
| |
| /* Make sure that existing clusters and new allocations are only used up to |
| * the next dependency if we shortened the request above */ |
| *cur_bytes = bytes; |
| |
| return 0; |
| } |
| |
| /* |
| * Checks how many already allocated clusters that don't require a new |
| * allocation there are at the given guest_offset (up to *bytes). |
| * If *host_offset is not INV_OFFSET, only physically contiguous clusters |
| * beginning at this host offset are counted. |
| * |
| * Note that guest_offset may not be cluster aligned. In this case, the |
| * returned *host_offset points to exact byte referenced by guest_offset and |
| * therefore isn't cluster aligned as well. |
| * |
| * Returns: |
| * 0: if no allocated clusters are available at the given offset. |
| * *bytes is normally unchanged. It is set to 0 if the cluster |
| * is allocated and can be overwritten in-place but doesn't have |
| * the right physical offset. |
| * |
| * 1: if allocated clusters that can be overwritten in place are |
| * available at the requested offset. *bytes may have decreased |
| * and describes the length of the area that can be written to. |
| * |
| * -errno: in error cases |
| */ |
| static int handle_copied(BlockDriverState *bs, uint64_t guest_offset, |
| uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int l2_index; |
| uint64_t l2_entry, cluster_offset; |
| uint64_t *l2_slice; |
| uint64_t nb_clusters; |
| unsigned int keep_clusters; |
| int ret; |
| |
| trace_qcow2_handle_copied(qemu_coroutine_self(), guest_offset, *host_offset, |
| *bytes); |
| |
| assert(*host_offset == INV_OFFSET || offset_into_cluster(s, guest_offset) |
| == offset_into_cluster(s, *host_offset)); |
| |
| /* |
| * Calculate the number of clusters to look for. We stop at L2 slice |
| * boundaries to keep things simple. |
| */ |
| nb_clusters = |
| size_to_clusters(s, offset_into_cluster(s, guest_offset) + *bytes); |
| |
| l2_index = offset_to_l2_slice_index(s, guest_offset); |
| nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index); |
| /* Limit total byte count to BDRV_REQUEST_MAX_BYTES */ |
| nb_clusters = MIN(nb_clusters, BDRV_REQUEST_MAX_BYTES >> s->cluster_bits); |
| |
| /* Find L2 entry for the first involved cluster */ |
| ret = get_cluster_table(bs, guest_offset, &l2_slice, &l2_index); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| l2_entry = get_l2_entry(s, l2_slice, l2_index); |
| cluster_offset = l2_entry & L2E_OFFSET_MASK; |
| |
| if (!cluster_needs_new_alloc(bs, l2_entry)) { |
| if (offset_into_cluster(s, cluster_offset)) { |
| qcow2_signal_corruption(bs, true, -1, -1, "%s cluster offset " |
| "%#" PRIx64 " unaligned (guest offset: %#" |
| PRIx64 ")", l2_entry & QCOW_OFLAG_ZERO ? |
| "Preallocated zero" : "Data", |
| cluster_offset, guest_offset); |
| ret = -EIO; |
| goto out; |
| } |
| |
| /* If a specific host_offset is required, check it */ |
| if (*host_offset != INV_OFFSET && cluster_offset != *host_offset) { |
| *bytes = 0; |
| ret = 0; |
| goto out; |
| } |
| |
| /* We keep all QCOW_OFLAG_COPIED clusters */ |
| keep_clusters = count_single_write_clusters(bs, nb_clusters, l2_slice, |
| l2_index, false); |
| assert(keep_clusters <= nb_clusters); |
| |
| *bytes = MIN(*bytes, |
| keep_clusters * s->cluster_size |
| - offset_into_cluster(s, guest_offset)); |
| assert(*bytes != 0); |
| |
| ret = calculate_l2_meta(bs, cluster_offset, guest_offset, |
| *bytes, l2_slice, m, true); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| ret = 1; |
| } else { |
| ret = 0; |
| } |
| |
| /* Cleanup */ |
| out: |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| |
| /* Only return a host offset if we actually made progress. Otherwise we |
| * would make requirements for handle_alloc() that it can't fulfill */ |
| if (ret > 0) { |
| *host_offset = cluster_offset + offset_into_cluster(s, guest_offset); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Allocates new clusters for the given guest_offset. |
| * |
| * At most *nb_clusters are allocated, and on return *nb_clusters is updated to |
| * contain the number of clusters that have been allocated and are contiguous |
| * in the image file. |
| * |
| * If *host_offset is not INV_OFFSET, it specifies the offset in the image file |
| * at which the new clusters must start. *nb_clusters can be 0 on return in |
| * this case if the cluster at host_offset is already in use. If *host_offset |
| * is INV_OFFSET, the clusters can be allocated anywhere in the image file. |
| * |
| * *host_offset is updated to contain the offset into the image file at which |
| * the first allocated cluster starts. |
| * |
| * Return 0 on success and -errno in error cases. -EAGAIN means that the |
| * function has been waiting for another request and the allocation must be |
| * restarted, but the whole request should not be failed. |
| */ |
| static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset, |
| uint64_t *host_offset, uint64_t *nb_clusters) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| |
| trace_qcow2_do_alloc_clusters_offset(qemu_coroutine_self(), guest_offset, |
| *host_offset, *nb_clusters); |
| |
| if (has_data_file(bs)) { |
| assert(*host_offset == INV_OFFSET || |
| *host_offset == start_of_cluster(s, guest_offset)); |
| *host_offset = start_of_cluster(s, guest_offset); |
| return 0; |
| } |
| |
| /* Allocate new clusters */ |
| trace_qcow2_cluster_alloc_phys(qemu_coroutine_self()); |
| if (*host_offset == INV_OFFSET) { |
| int64_t cluster_offset = |
| qcow2_alloc_clusters(bs, *nb_clusters * s->cluster_size); |
| if (cluster_offset < 0) { |
| return cluster_offset; |
| } |
| *host_offset = cluster_offset; |
| return 0; |
| } else { |
| int64_t ret = qcow2_alloc_clusters_at(bs, *host_offset, *nb_clusters); |
| if (ret < 0) { |
| return ret; |
| } |
| *nb_clusters = ret; |
| return 0; |
| } |
| } |
| |
| /* |
| * Allocates new clusters for an area that is either still unallocated or |
| * cannot be overwritten in-place. If *host_offset is not INV_OFFSET, |
| * clusters are only allocated if the new allocation can match the specified |
| * host offset. |
| * |
| * Note that guest_offset may not be cluster aligned. In this case, the |
| * returned *host_offset points to exact byte referenced by guest_offset and |
| * therefore isn't cluster aligned as well. |
| * |
| * Returns: |
| * 0: if no clusters could be allocated. *bytes is set to 0, |
| * *host_offset is left unchanged. |
| * |
| * 1: if new clusters were allocated. *bytes may be decreased if the |
| * new allocation doesn't cover all of the requested area. |
| * *host_offset is updated to contain the host offset of the first |
| * newly allocated cluster. |
| * |
| * -errno: in error cases |
| */ |
| static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset, |
| uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| int l2_index; |
| uint64_t *l2_slice; |
| uint64_t nb_clusters; |
| int ret; |
| |
| uint64_t alloc_cluster_offset; |
| |
| trace_qcow2_handle_alloc(qemu_coroutine_self(), guest_offset, *host_offset, |
| *bytes); |
| assert(*bytes > 0); |
| |
| /* |
| * Calculate the number of clusters to look for. We stop at L2 slice |
| * boundaries to keep things simple. |
| */ |
| nb_clusters = |
| size_to_clusters(s, offset_into_cluster(s, guest_offset) + *bytes); |
| |
| l2_index = offset_to_l2_slice_index(s, guest_offset); |
| nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index); |
| /* Limit total allocation byte count to BDRV_REQUEST_MAX_BYTES */ |
| nb_clusters = MIN(nb_clusters, BDRV_REQUEST_MAX_BYTES >> s->cluster_bits); |
| |
| /* Find L2 entry for the first involved cluster */ |
| ret = get_cluster_table(bs, guest_offset, &l2_slice, &l2_index); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| nb_clusters = count_single_write_clusters(bs, nb_clusters, |
| l2_slice, l2_index, true); |
| |
| /* This function is only called when there were no non-COW clusters, so if |
| * we can't find any unallocated or COW clusters either, something is |
| * wrong with our code. */ |
| assert(nb_clusters > 0); |
| |
| /* Allocate at a given offset in the image file */ |
| alloc_cluster_offset = *host_offset == INV_OFFSET ? INV_OFFSET : |
| start_of_cluster(s, *host_offset); |
| ret = do_alloc_cluster_offset(bs, guest_offset, &alloc_cluster_offset, |
| &nb_clusters); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| /* Can't extend contiguous allocation */ |
| if (nb_clusters == 0) { |
| *bytes = 0; |
| ret = 0; |
| goto out; |
| } |
| |
| assert(alloc_cluster_offset != INV_OFFSET); |
| |
| /* |
| * Save info needed for meta data update. |
| * |
| * requested_bytes: Number of bytes from the start of the first |
| * newly allocated cluster to the end of the (possibly shortened |
| * before) write request. |
| * |
| * avail_bytes: Number of bytes from the start of the first |
| * newly allocated to the end of the last newly allocated cluster. |
| * |
| * nb_bytes: The number of bytes from the start of the first |
| * newly allocated cluster to the end of the area that the write |
| * request actually writes to (excluding COW at the end) |
| */ |
| uint64_t requested_bytes = *bytes + offset_into_cluster(s, guest_offset); |
| int avail_bytes = nb_clusters << s->cluster_bits; |
| int nb_bytes = MIN(requested_bytes, avail_bytes); |
| |
| *host_offset = alloc_cluster_offset + offset_into_cluster(s, guest_offset); |
| *bytes = MIN(*bytes, nb_bytes - offset_into_cluster(s, guest_offset)); |
| assert(*bytes != 0); |
| |
| ret = calculate_l2_meta(bs, alloc_cluster_offset, guest_offset, *bytes, |
| l2_slice, m, false); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| ret = 1; |
| |
| out: |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| return ret; |
| } |
| |
| /* |
| * For a given area on the virtual disk defined by @offset and @bytes, |
| * find the corresponding area on the qcow2 image, allocating new |
| * clusters (or subclusters) if necessary. The result can span a |
| * combination of allocated and previously unallocated clusters. |
| * |
| * Note that offset may not be cluster aligned. In this case, the returned |
| * *host_offset points to exact byte referenced by offset and therefore |
| * isn't cluster aligned as well. |
| * |
| * On return, @host_offset is set to the beginning of the requested |
| * area. This area is guaranteed to be contiguous on the qcow2 file |
| * but it can be smaller than initially requested. In this case @bytes |
| * is updated with the actual size. |
| * |
| * If any clusters or subclusters were allocated then @m contains a |
| * list with the information of all the affected regions. Note that |
| * this can happen regardless of whether this function succeeds or |
| * not. The caller is responsible for updating the L2 metadata of the |
| * allocated clusters (on success) or freeing them (on failure), and |
| * for clearing the contents of @m afterwards in both cases. |
| * |
| * If the request conflicts with another write request in flight, the coroutine |
| * is queued and will be reentered when the dependency has completed. |
| * |
| * Return 0 on success and -errno in error cases |
| */ |
| int qcow2_alloc_host_offset(BlockDriverState *bs, uint64_t offset, |
| unsigned int *bytes, uint64_t *host_offset, |
| QCowL2Meta **m) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t start, remaining; |
| uint64_t cluster_offset; |
| uint64_t cur_bytes; |
| int ret; |
| |
| trace_qcow2_alloc_clusters_offset(qemu_coroutine_self(), offset, *bytes); |
| |
| again: |
| start = offset; |
| remaining = *bytes; |
| cluster_offset = INV_OFFSET; |
| *host_offset = INV_OFFSET; |
| cur_bytes = 0; |
| *m = NULL; |
| |
| while (true) { |
| |
| if (*host_offset == INV_OFFSET && cluster_offset != INV_OFFSET) { |
| *host_offset = cluster_offset; |
| } |
| |
| assert(remaining >= cur_bytes); |
| |
| start += cur_bytes; |
| remaining -= cur_bytes; |
| |
| if (cluster_offset != INV_OFFSET) { |
| cluster_offset += cur_bytes; |
| } |
| |
| if (remaining == 0) { |
| break; |
| } |
| |
| cur_bytes = remaining; |
| |
| /* |
| * Now start gathering as many contiguous clusters as possible: |
| * |
| * 1. Check for overlaps with in-flight allocations |
| * |
| * a) Overlap not in the first cluster -> shorten this request and |
| * let the caller handle the rest in its next loop iteration. |
| * |
| * b) Real overlaps of two requests. Yield and restart the search |
| * for contiguous clusters (the situation could have changed |
| * while we were sleeping) |
| * |
| * c) TODO: Request starts in the same cluster as the in-flight |
| * allocation ends. Shorten the COW of the in-fight allocation, |
| * set cluster_offset to write to the same cluster and set up |
| * the right synchronisation between the in-flight request and |
| * the new one. |
| */ |
| ret = handle_dependencies(bs, start, &cur_bytes, m); |
| if (ret == -EAGAIN) { |
| /* Currently handle_dependencies() doesn't yield if we already had |
| * an allocation. If it did, we would have to clean up the L2Meta |
| * structs before starting over. */ |
| assert(*m == NULL); |
| goto again; |
| } else if (ret < 0) { |
| return ret; |
| } else if (cur_bytes == 0) { |
| break; |
| } else { |
| /* handle_dependencies() may have decreased cur_bytes (shortened |
| * the allocations below) so that the next dependency is processed |
| * correctly during the next loop iteration. */ |
| } |
| |
| /* |
| * 2. Count contiguous COPIED clusters. |
| */ |
| ret = handle_copied(bs, start, &cluster_offset, &cur_bytes, m); |
| if (ret < 0) { |
| return ret; |
| } else if (ret) { |
| continue; |
| } else if (cur_bytes == 0) { |
| break; |
| } |
| |
| /* |
| * 3. If the request still hasn't completed, allocate new clusters, |
| * considering any cluster_offset of steps 1c or 2. |
| */ |
| ret = handle_alloc(bs, start, &cluster_offset, &cur_bytes, m); |
| if (ret < 0) { |
| return ret; |
| } else if (ret) { |
| continue; |
| } else { |
| assert(cur_bytes == 0); |
| break; |
| } |
| } |
| |
| *bytes -= remaining; |
| assert(*bytes > 0); |
| assert(*host_offset != INV_OFFSET); |
| assert(offset_into_cluster(s, *host_offset) == |
| offset_into_cluster(s, offset)); |
| |
| return 0; |
| } |
| |
| /* |
| * This discards as many clusters of nb_clusters as possible at once (i.e. |
| * all clusters in the same L2 slice) and returns the number of discarded |
| * clusters. |
| */ |
| static int discard_in_l2_slice(BlockDriverState *bs, uint64_t offset, |
| uint64_t nb_clusters, |
| enum qcow2_discard_type type, bool full_discard) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t *l2_slice; |
| int l2_index; |
| int ret; |
| int i; |
| |
| ret = get_cluster_table(bs, offset, &l2_slice, &l2_index); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* Limit nb_clusters to one L2 slice */ |
| nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index); |
| assert(nb_clusters <= INT_MAX); |
| |
| for (i = 0; i < nb_clusters; i++) { |
| uint64_t old_l2_entry = get_l2_entry(s, l2_slice, l2_index + i); |
| uint64_t old_l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i); |
| uint64_t new_l2_entry = old_l2_entry; |
| uint64_t new_l2_bitmap = old_l2_bitmap; |
| QCow2ClusterType cluster_type = |
| qcow2_get_cluster_type(bs, old_l2_entry); |
| |
| /* |
| * If full_discard is true, the cluster should not read back as zeroes, |
| * but rather fall through to the backing file. |
| * |
| * If full_discard is false, make sure that a discarded area reads back |
| * as zeroes for v3 images (we cannot do it for v2 without actually |
| * writing a zero-filled buffer). We can skip the operation if the |
| * cluster is already marked as zero, or if it's unallocated and we |
| * don't have a backing file. |
| * |
| * TODO We might want to use bdrv_block_status(bs) here, but we're |
| * holding s->lock, so that doesn't work today. |
| */ |
| if (full_discard) { |
| new_l2_entry = new_l2_bitmap = 0; |
| } else if (bs->backing || qcow2_cluster_is_allocated(cluster_type)) { |
| if (has_subclusters(s)) { |
| new_l2_entry = 0; |
| new_l2_bitmap = QCOW_L2_BITMAP_ALL_ZEROES; |
| } else { |
| new_l2_entry = s->qcow_version >= 3 ? QCOW_OFLAG_ZERO : 0; |
| } |
| } |
| |
| if (old_l2_entry == new_l2_entry && old_l2_bitmap == new_l2_bitmap) { |
| continue; |
| } |
| |
| /* First remove L2 entries */ |
| qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); |
| set_l2_entry(s, l2_slice, l2_index + i, new_l2_entry); |
| if (has_subclusters(s)) { |
| set_l2_bitmap(s, l2_slice, l2_index + i, new_l2_bitmap); |
| } |
| /* Then decrease the refcount */ |
| qcow2_free_any_cluster(bs, old_l2_entry, type); |
| } |
| |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| |
| return nb_clusters; |
| } |
| |
| int qcow2_cluster_discard(BlockDriverState *bs, uint64_t offset, |
| uint64_t bytes, enum qcow2_discard_type type, |
| bool full_discard) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t end_offset = offset + bytes; |
| uint64_t nb_clusters; |
| int64_t cleared; |
| int ret; |
| |
| /* Caller must pass aligned values, except at image end */ |
| assert(QEMU_IS_ALIGNED(offset, s->cluster_size)); |
| assert(QEMU_IS_ALIGNED(end_offset, s->cluster_size) || |
| end_offset == bs->total_sectors << BDRV_SECTOR_BITS); |
| |
| nb_clusters = size_to_clusters(s, bytes); |
| |
| s->cache_discards = true; |
| |
| /* Each L2 slice is handled by its own loop iteration */ |
| while (nb_clusters > 0) { |
| cleared = discard_in_l2_slice(bs, offset, nb_clusters, type, |
| full_discard); |
| if (cleared < 0) { |
| ret = cleared; |
| goto fail; |
| } |
| |
| nb_clusters -= cleared; |
| offset += (cleared * s->cluster_size); |
| } |
| |
| ret = 0; |
| fail: |
| s->cache_discards = false; |
| qcow2_process_discards(bs, ret); |
| |
| return ret; |
| } |
| |
| /* |
| * This zeroes as many clusters of nb_clusters as possible at once (i.e. |
| * all clusters in the same L2 slice) and returns the number of zeroed |
| * clusters. |
| */ |
| static int zero_in_l2_slice(BlockDriverState *bs, uint64_t offset, |
| uint64_t nb_clusters, int flags) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t *l2_slice; |
| int l2_index; |
| int ret; |
| int i; |
| |
| ret = get_cluster_table(bs, offset, &l2_slice, &l2_index); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* Limit nb_clusters to one L2 slice */ |
| nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index); |
| assert(nb_clusters <= INT_MAX); |
| |
| for (i = 0; i < nb_clusters; i++) { |
| uint64_t old_l2_entry = get_l2_entry(s, l2_slice, l2_index + i); |
| uint64_t old_l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i); |
| QCow2ClusterType type = qcow2_get_cluster_type(bs, old_l2_entry); |
| bool unmap = (type == QCOW2_CLUSTER_COMPRESSED) || |
| ((flags & BDRV_REQ_MAY_UNMAP) && qcow2_cluster_is_allocated(type)); |
| uint64_t new_l2_entry = unmap ? 0 : old_l2_entry; |
| uint64_t new_l2_bitmap = old_l2_bitmap; |
| |
| if (has_subclusters(s)) { |
| new_l2_bitmap = QCOW_L2_BITMAP_ALL_ZEROES; |
| } else { |
| new_l2_entry |= QCOW_OFLAG_ZERO; |
| } |
| |
| if (old_l2_entry == new_l2_entry && old_l2_bitmap == new_l2_bitmap) { |
| continue; |
| } |
| |
| qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); |
| if (unmap) { |
| qcow2_free_any_cluster(bs, old_l2_entry, QCOW2_DISCARD_REQUEST); |
| } |
| set_l2_entry(s, l2_slice, l2_index + i, new_l2_entry); |
| if (has_subclusters(s)) { |
| set_l2_bitmap(s, l2_slice, l2_index + i, new_l2_bitmap); |
| } |
| } |
| |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| |
| return nb_clusters; |
| } |
| |
| static int zero_l2_subclusters(BlockDriverState *bs, uint64_t offset, |
| unsigned nb_subclusters) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t *l2_slice; |
| uint64_t old_l2_bitmap, l2_bitmap; |
| int l2_index, ret, sc = offset_to_sc_index(s, offset); |
| |
| /* For full clusters use zero_in_l2_slice() instead */ |
| assert(nb_subclusters > 0 && nb_subclusters < s->subclusters_per_cluster); |
| assert(sc + nb_subclusters <= s->subclusters_per_cluster); |
| assert(offset_into_subcluster(s, offset) == 0); |
| |
| ret = get_cluster_table(bs, offset, &l2_slice, &l2_index); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| switch (qcow2_get_cluster_type(bs, get_l2_entry(s, l2_slice, l2_index))) { |
| case QCOW2_CLUSTER_COMPRESSED: |
| ret = -ENOTSUP; /* We cannot partially zeroize compressed clusters */ |
| goto out; |
| case QCOW2_CLUSTER_NORMAL: |
| case QCOW2_CLUSTER_UNALLOCATED: |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| old_l2_bitmap = l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index); |
| |
| l2_bitmap |= QCOW_OFLAG_SUB_ZERO_RANGE(sc, sc + nb_subclusters); |
| l2_bitmap &= ~QCOW_OFLAG_SUB_ALLOC_RANGE(sc, sc + nb_subclusters); |
| |
| if (old_l2_bitmap != l2_bitmap) { |
| set_l2_bitmap(s, l2_slice, l2_index, l2_bitmap); |
| qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); |
| } |
| |
| ret = 0; |
| out: |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| |
| return ret; |
| } |
| |
| int qcow2_subcluster_zeroize(BlockDriverState *bs, uint64_t offset, |
| uint64_t bytes, int flags) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t end_offset = offset + bytes; |
| uint64_t nb_clusters; |
| unsigned head, tail; |
| int64_t cleared; |
| int ret; |
| |
| /* If we have to stay in sync with an external data file, zero out |
| * s->data_file first. */ |
| if (data_file_is_raw(bs)) { |
| assert(has_data_file(bs)); |
| ret = bdrv_co_pwrite_zeroes(s->data_file, offset, bytes, flags); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| |
| /* Caller must pass aligned values, except at image end */ |
| assert(offset_into_subcluster(s, offset) == 0); |
| assert(offset_into_subcluster(s, end_offset) == 0 || |
| end_offset >= bs->total_sectors << BDRV_SECTOR_BITS); |
| |
| /* |
| * The zero flag is only supported by version 3 and newer. However, if we |
| * have no backing file, we can resort to discard in version 2. |
| */ |
| if (s->qcow_version < 3) { |
| if (!bs->backing) { |
| return qcow2_cluster_discard(bs, offset, bytes, |
| QCOW2_DISCARD_REQUEST, false); |
| } |
| return -ENOTSUP; |
| } |
| |
| head = MIN(end_offset, ROUND_UP(offset, s->cluster_size)) - offset; |
| offset += head; |
| |
| tail = (end_offset >= bs->total_sectors << BDRV_SECTOR_BITS) ? 0 : |
| end_offset - MAX(offset, start_of_cluster(s, end_offset)); |
| end_offset -= tail; |
| |
| s->cache_discards = true; |
| |
| if (head) { |
| ret = zero_l2_subclusters(bs, offset - head, |
| size_to_subclusters(s, head)); |
| if (ret < 0) { |
| goto fail; |
| } |
| } |
| |
| /* Each L2 slice is handled by its own loop iteration */ |
| nb_clusters = size_to_clusters(s, end_offset - offset); |
| |
| while (nb_clusters > 0) { |
| cleared = zero_in_l2_slice(bs, offset, nb_clusters, flags); |
| if (cleared < 0) { |
| ret = cleared; |
| goto fail; |
| } |
| |
| nb_clusters -= cleared; |
| offset += (cleared * s->cluster_size); |
| } |
| |
| if (tail) { |
| ret = zero_l2_subclusters(bs, end_offset, size_to_subclusters(s, tail)); |
| if (ret < 0) { |
| goto fail; |
| } |
| } |
| |
| ret = 0; |
| fail: |
| s->cache_discards = false; |
| qcow2_process_discards(bs, ret); |
| |
| return ret; |
| } |
| |
| /* |
| * Expands all zero clusters in a specific L1 table (or deallocates them, for |
| * non-backed non-pre-allocated zero clusters). |
| * |
| * l1_entries and *visited_l1_entries are used to keep track of progress for |
| * status_cb(). l1_entries contains the total number of L1 entries and |
| * *visited_l1_entries counts all visited L1 entries. |
| */ |
| static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table, |
| int l1_size, int64_t *visited_l1_entries, |
| int64_t l1_entries, |
| BlockDriverAmendStatusCB *status_cb, |
| void *cb_opaque) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| bool is_active_l1 = (l1_table == s->l1_table); |
| uint64_t *l2_slice = NULL; |
| unsigned slice, slice_size2, n_slices; |
| int ret; |
| int i, j; |
| |
| /* qcow2_downgrade() is not allowed in images with subclusters */ |
| assert(!has_subclusters(s)); |
| |
| slice_size2 = s->l2_slice_size * l2_entry_size(s); |
| n_slices = s->cluster_size / slice_size2; |
| |
| if (!is_active_l1) { |
| /* inactive L2 tables require a buffer to be stored in when loading |
| * them from disk */ |
| l2_slice = qemu_try_blockalign(bs->file->bs, slice_size2); |
| if (l2_slice == NULL) { |
| return -ENOMEM; |
| } |
| } |
| |
| for (i = 0; i < l1_size; i++) { |
| uint64_t l2_offset = l1_table[i] & L1E_OFFSET_MASK; |
| uint64_t l2_refcount; |
| |
| if (!l2_offset) { |
| /* unallocated */ |
| (*visited_l1_entries)++; |
| if (status_cb) { |
| status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque); |
| } |
| continue; |
| } |
| |
| if (offset_into_cluster(s, l2_offset)) { |
| qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" |
| PRIx64 " unaligned (L1 index: %#x)", |
| l2_offset, i); |
| ret = -EIO; |
| goto fail; |
| } |
| |
| ret = qcow2_get_refcount(bs, l2_offset >> s->cluster_bits, |
| &l2_refcount); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| for (slice = 0; slice < n_slices; slice++) { |
| uint64_t slice_offset = l2_offset + slice * slice_size2; |
| bool l2_dirty = false; |
| if (is_active_l1) { |
| /* get active L2 tables from cache */ |
| ret = qcow2_cache_get(bs, s->l2_table_cache, slice_offset, |
| (void **)&l2_slice); |
| } else { |
| /* load inactive L2 tables from disk */ |
| ret = bdrv_pread(bs->file, slice_offset, l2_slice, slice_size2); |
| } |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| for (j = 0; j < s->l2_slice_size; j++) { |
| uint64_t l2_entry = get_l2_entry(s, l2_slice, j); |
| int64_t offset = l2_entry & L2E_OFFSET_MASK; |
| QCow2ClusterType cluster_type = |
| qcow2_get_cluster_type(bs, l2_entry); |
| |
| if (cluster_type != QCOW2_CLUSTER_ZERO_PLAIN && |
| cluster_type != QCOW2_CLUSTER_ZERO_ALLOC) { |
| continue; |
| } |
| |
| if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) { |
| if (!bs->backing) { |
| /* |
| * not backed; therefore we can simply deallocate the |
| * cluster. No need to call set_l2_bitmap(), this |
| * function doesn't support images with subclusters. |
| */ |
| set_l2_entry(s, l2_slice, j, 0); |
| l2_dirty = true; |
| continue; |
| } |
| |
| offset = qcow2_alloc_clusters(bs, s->cluster_size); |
| if (offset < 0) { |
| ret = offset; |
| goto fail; |
| } |
| |
| /* The offset must fit in the offset field */ |
| assert((offset & L2E_OFFSET_MASK) == offset); |
| |
| if (l2_refcount > 1) { |
| /* For shared L2 tables, set the refcount accordingly |
| * (it is already 1 and needs to be l2_refcount) */ |
| ret = qcow2_update_cluster_refcount( |
| bs, offset >> s->cluster_bits, |
| refcount_diff(1, l2_refcount), false, |
| QCOW2_DISCARD_OTHER); |
| if (ret < 0) { |
| qcow2_free_clusters(bs, offset, s->cluster_size, |
| QCOW2_DISCARD_OTHER); |
| goto fail; |
| } |
| } |
| } |
| |
| if (offset_into_cluster(s, offset)) { |
| int l2_index = slice * s->l2_slice_size + j; |
| qcow2_signal_corruption( |
| bs, true, -1, -1, |
| "Cluster allocation offset " |
| "%#" PRIx64 " unaligned (L2 offset: %#" |
| PRIx64 ", L2 index: %#x)", offset, |
| l2_offset, l2_index); |
| if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) { |
| qcow2_free_clusters(bs, offset, s->cluster_size, |
| QCOW2_DISCARD_ALWAYS); |
| } |
| ret = -EIO; |
| goto fail; |
| } |
| |
| ret = qcow2_pre_write_overlap_check(bs, 0, offset, |
| s->cluster_size, true); |
| if (ret < 0) { |
| if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) { |
| qcow2_free_clusters(bs, offset, s->cluster_size, |
| QCOW2_DISCARD_ALWAYS); |
| } |
| goto fail; |
| } |
| |
| ret = bdrv_pwrite_zeroes(s->data_file, offset, |
| s->cluster_size, 0); |
| if (ret < 0) { |
| if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) { |
| qcow2_free_clusters(bs, offset, s->cluster_size, |
| QCOW2_DISCARD_ALWAYS); |
| } |
| goto fail; |
| } |
| |
| if (l2_refcount == 1) { |
| set_l2_entry(s, l2_slice, j, offset | QCOW_OFLAG_COPIED); |
| } else { |
| set_l2_entry(s, l2_slice, j, offset); |
| } |
| /* |
| * No need to call set_l2_bitmap() after set_l2_entry() because |
| * this function doesn't support images with subclusters. |
| */ |
| l2_dirty = true; |
| } |
| |
| if (is_active_l1) { |
| if (l2_dirty) { |
| qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice); |
| qcow2_cache_depends_on_flush(s->l2_table_cache); |
| } |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| } else { |
| if (l2_dirty) { |
| ret = qcow2_pre_write_overlap_check( |
| bs, QCOW2_OL_INACTIVE_L2 | QCOW2_OL_ACTIVE_L2, |
| slice_offset, slice_size2, false); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| ret = bdrv_pwrite(bs->file, slice_offset, |
| l2_slice, slice_size2); |
| if (ret < 0) { |
| goto fail; |
| } |
| } |
| } |
| } |
| |
| (*visited_l1_entries)++; |
| if (status_cb) { |
| status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque); |
| } |
| } |
| |
| ret = 0; |
| |
| fail: |
| if (l2_slice) { |
| if (!is_active_l1) { |
| qemu_vfree(l2_slice); |
| } else { |
| qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice); |
| } |
| } |
| return ret; |
| } |
| |
| /* |
| * For backed images, expands all zero clusters on the image. For non-backed |
| * images, deallocates all non-pre-allocated zero clusters (and claims the |
| * allocation for pre-allocated ones). This is important for downgrading to a |
| * qcow2 version which doesn't yet support metadata zero clusters. |
| */ |
| int qcow2_expand_zero_clusters(BlockDriverState *bs, |
| BlockDriverAmendStatusCB *status_cb, |
| void *cb_opaque) |
| { |
| BDRVQcow2State *s = bs->opaque; |
| uint64_t *l1_table = NULL; |
| int64_t l1_entries = 0, visited_l1_entries = 0; |
| int ret; |
| int i, j; |
| |
| if (status_cb) { |
| l1_entries = s->l1_size; |
| for (i = 0; i < s->nb_snapshots; i++) { |
| l1_entries += s->snapshots[i].l1_size; |
| } |
| } |
| |
| ret = expand_zero_clusters_in_l1(bs, s->l1_table, s->l1_size, |
| &visited_l1_entries, l1_entries, |
| status_cb, cb_opaque); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| /* Inactive L1 tables may point to active L2 tables - therefore it is |
| * necessary to flush the L2 table cache before trying to access the L2 |
| * tables pointed to by inactive L1 entries (else we might try to expand |
| * zero clusters that have already been expanded); furthermore, it is also |
| * necessary to empty the L2 table cache, since it may contain tables which |
| * are now going to be modified directly on disk, bypassing the cache. |
| * qcow2_cache_empty() does both for us. */ |
| ret = qcow2_cache_empty(bs, s->l2_table_cache); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| for (i = 0; i < s->nb_snapshots; i++) { |
| int l1_size2; |
| uint64_t *new_l1_table; |
| Error *local_err = NULL; |
| |
| ret = qcow2_validate_table(bs, s->snapshots[i].l1_table_offset, |
| s->snapshots[i].l1_size, L1E_SIZE, |
| QCOW_MAX_L1_SIZE, "Snapshot L1 table", |
| &local_err); |
| if (ret < 0) { |
| error_report_err(local_err); |
| goto fail; |
| } |
| |
| l1_size2 = s->snapshots[i].l1_size * L1E_SIZE; |
| new_l1_table = g_try_realloc(l1_table, l1_size2); |
| |
| if (!new_l1_table) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| l1_table = new_l1_table; |
| |
| ret = bdrv_pread(bs->file, s->snapshots[i].l1_table_offset, |
| l1_table, l1_size2); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| for (j = 0; j < s->snapshots[i].l1_size; j++) { |
| be64_to_cpus(&l1_table[j]); |
| } |
| |
| ret = expand_zero_clusters_in_l1(bs, l1_table, s->snapshots[i].l1_size, |
| &visited_l1_entries, l1_entries, |
| status_cb, cb_opaque); |
| if (ret < 0) { |
| goto fail; |
| } |
| } |
| |
| ret = 0; |
| |
| fail: |
| g_free(l1_table); |
| return ret; |
| } |