Google Git
Sign in
qemu / qemu / 2d2e632ad00d11867c6c5625605b1fbc022dd62f / . / qapi-schema.json
blob: 5658723b37ecbaf7a336fe1094c243df434cff7d [file] [log] [blame]
# -*- Mode: Python -*-
#
# QAPI Schema
# QAPI common definitions
{ 'include': 'qapi/common.json' }
# QAPI crypto definitions
{ 'include': 'qapi/crypto.json' }
# QAPI block definitions
{ 'include': 'qapi/block.json' }
# QAPI event definitions
{ 'include': 'qapi/event.json' }
# Tracing commands
{ 'include': 'qapi/trace.json' }
# QAPI introspection
{ 'include': 'qapi/introspect.json' }
##
# @LostTickPolicy:
#
# Policy for handling lost ticks in timer devices.
#
# @discard: throw away the missed tick(s) and continue with future injection
# normally. Guest time may be delayed, unless the OS has explicit
# handling of lost ticks
#
# @delay: continue to deliver ticks at the normal rate. Guest time will be
# delayed due to the late tick
#
# @merge: merge the missed tick(s) into one tick and inject. Guest time
# may be delayed, depending on how the OS reacts to the merging
# of ticks
#
# @slew: deliver ticks at a higher rate to catch up with the missed tick. The
# guest time should not be delayed once catchup is complete.
#
# Since: 2.0
##
{ 'enum': 'LostTickPolicy',
'data': ['discard', 'delay', 'merge', 'slew' ] }
# @add_client
#
# Allow client connections for VNC, Spice and socket based
# character devices to be passed in to QEMU via SCM_RIGHTS.
#
# @protocol: protocol name. Valid names are "vnc", "spice" or the
# name of a character device (eg. from -chardev id=XXXX)
#
# @fdname: file descriptor name previously passed via 'getfd' command
#
# @skipauth: #optional whether to skip authentication. Only applies
# to "vnc" and "spice" protocols
#
# @tls: #optional whether to perform TLS. Only applies to the "spice"
# protocol
#
# Returns: nothing on success.
#
# Since: 0.14.0
##
{ 'command': 'add_client',
'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool',
'*tls': 'bool' } }
##
# @NameInfo:
#
# Guest name information.
#
# @name: #optional The name of the guest
#
# Since 0.14.0
##
{ 'struct': 'NameInfo', 'data': {'*name': 'str'} }
##
# @query-name:
#
# Return the name information of a guest.
#
# Returns: @NameInfo of the guest
#
# Since 0.14.0
##
{ 'command': 'query-name', 'returns': 'NameInfo' }
##
# @KvmInfo:
#
# Information about support for KVM acceleration
#
# @enabled: true if KVM acceleration is active
#
# @present: true if KVM acceleration is built into this executable
#
# Since: 0.14.0
##
{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} }
##
# @query-kvm:
#
# Returns information about KVM acceleration
#
# Returns: @KvmInfo
#
# Since: 0.14.0
##
{ 'command': 'query-kvm', 'returns': 'KvmInfo' }
##
# @RunState
#
# An enumeration of VM run states.
#
# @debug: QEMU is running on a debugger
#
# @finish-migrate: guest is paused to finish the migration process
#
# @inmigrate: guest is paused waiting for an incoming migration. Note
# that this state does not tell whether the machine will start at the
# end of the migration. This depends on the command-line -S option and
# any invocation of 'stop' or 'cont' that has happened since QEMU was
# started.
#
# @internal-error: An internal error that prevents further guest execution
# has occurred
#
# @io-error: the last IOP has failed and the device is configured to pause
# on I/O errors
#
# @paused: guest has been paused via the 'stop' command
#
# @postmigrate: guest is paused following a successful 'migrate'
#
# @prelaunch: QEMU was started with -S and guest has not started
#
# @restore-vm: guest is paused to restore VM state
#
# @running: guest is actively running
#
# @save-vm: guest is paused to save the VM state
#
# @shutdown: guest is shut down (and -no-shutdown is in use)
#
# @suspended: guest is suspended (ACPI S3)
#
# @watchdog: the watchdog action is configured to pause and has been triggered
#
# @guest-panicked: guest has been panicked as a result of guest OS panic
##
{ 'enum': 'RunState',
'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
'guest-panicked' ] }
##
# @StatusInfo:
#
# Information about VCPU run state
#
# @running: true if all VCPUs are runnable, false if not runnable
#
# @singlestep: true if VCPUs are in single-step mode
#
# @status: the virtual machine @RunState
#
# Since: 0.14.0
#
# Notes: @singlestep is enabled through the GDB stub
##
{ 'struct': 'StatusInfo',
'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'} }
##
# @query-status:
#
# Query the run status of all VCPUs
#
# Returns: @StatusInfo reflecting all VCPUs
#
# Since: 0.14.0
##
{ 'command': 'query-status', 'returns': 'StatusInfo' }
##
# @UuidInfo:
#
# Guest UUID information.
#
# @UUID: the UUID of the guest
#
# Since: 0.14.0
#
# Notes: If no UUID was specified for the guest, a null UUID is returned.
##
{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} }
##
# @query-uuid:
#
# Query the guest UUID information.
#
# Returns: The @UuidInfo for the guest
#
# Since 0.14.0
##
{ 'command': 'query-uuid', 'returns': 'UuidInfo' }
##
# @ChardevInfo:
#
# Information about a character device.
#
# @label: the label of the character device
#
# @filename: the filename of the character device
#
# @frontend-open: shows whether the frontend device attached to this backend
# (eg. with the chardev=... option) is in open or closed state
# (since 2.1)
#
# Notes: @filename is encoded using the QEMU command line character device
# encoding. See the QEMU man page for details.
#
# Since: 0.14.0
##
{ 'struct': 'ChardevInfo', 'data': {'label': 'str',
'filename': 'str',
'frontend-open': 'bool'} }
##
# @query-chardev:
#
# Returns information about current character devices.
#
# Returns: a list of @ChardevInfo
#
# Since: 0.14.0
##
{ 'command': 'query-chardev', 'returns': ['ChardevInfo'] }
##
# @ChardevBackendInfo:
#
# Information about a character device backend
#
# @name: The backend name
#
# Since: 2.0
##
{ 'struct': 'ChardevBackendInfo', 'data': {'name': 'str'} }
##
# @query-chardev-backends:
#
# Returns information about character device backends.
#
# Returns: a list of @ChardevBackendInfo
#
# Since: 2.0
##
{ 'command': 'query-chardev-backends', 'returns': ['ChardevBackendInfo'] }
##
# @DataFormat:
#
# An enumeration of data format.
#
# @utf8: Data is a UTF-8 string (RFC 3629)
#
# @base64: Data is Base64 encoded binary (RFC 3548)
#
# Since: 1.4
##
{ 'enum': 'DataFormat',
'data': [ 'utf8', 'base64' ] }
##
# @ringbuf-write:
#
# Write to a ring buffer character device.
#
# @device: the ring buffer character device name
#
# @data: data to write
#
# @format: #optional data encoding (default 'utf8').
# - base64: data must be base64 encoded text. Its binary
# decoding gets written.
# - utf8: data's UTF-8 encoding is written
# - data itself is always Unicode regardless of format, like
# any other string.
#
# Returns: Nothing on success
#
# Since: 1.4
##
{ 'command': 'ringbuf-write',
'data': {'device': 'str', 'data': 'str',
'*format': 'DataFormat'} }
##
# @ringbuf-read:
#
# Read from a ring buffer character device.
#
# @device: the ring buffer character device name
#
# @size: how many bytes to read at most
#
# @format: #optional data encoding (default 'utf8').
# - base64: the data read is returned in base64 encoding.
# - utf8: the data read is interpreted as UTF-8.
# Bug: can screw up when the buffer contains invalid UTF-8
# sequences, NUL characters, after the ring buffer lost
# data, and when reading stops because the size limit is
# reached.
# - The return value is always Unicode regardless of format,
# like any other string.
#
# Returns: data read from the device
#
# Since: 1.4
##
{ 'command': 'ringbuf-read',
'data': {'device': 'str', 'size': 'int', '*format': 'DataFormat'},
'returns': 'str' }
##
# @EventInfo:
#
# Information about a QMP event
#
# @name: The event name
#
# Since: 1.2.0
##
{ 'struct': 'EventInfo', 'data': {'name': 'str'} }
##
# @query-events:
#
# Return a list of supported QMP events by this server
#
# Returns: A list of @EventInfo for all supported events
#
# Since: 1.2.0
##
{ 'command': 'query-events', 'returns': ['EventInfo'] }
##
# @MigrationStats
#
# Detailed migration status.
#
# @transferred: amount of bytes already transferred to the target VM
#
# @remaining: amount of bytes remaining to be transferred to the target VM
#
# @total: total amount of bytes involved in the migration process
#
# @duplicate: number of duplicate (zero) pages (since 1.2)
#
# @skipped: number of skipped zero pages (since 1.5)
#
# @normal : number of normal pages (since 1.2)
#
# @normal-bytes: number of normal bytes sent (since 1.2)
#
# @dirty-pages-rate: number of pages dirtied by second by the
# guest (since 1.3)
#
# @mbps: throughput in megabits/sec. (since 1.6)
#
# @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1)
#
# @postcopy-requests: The number of page requests received from the destination
# (since 2.7)
#
# Since: 0.14.0
##
{ 'struct': 'MigrationStats',
'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
'mbps' : 'number', 'dirty-sync-count' : 'int',
'postcopy-requests' : 'int' } }
##
# @XBZRLECacheStats
#
# Detailed XBZRLE migration cache statistics
#
# @cache-size: XBZRLE cache size
#
# @bytes: amount of bytes already transferred to the target VM
#
# @pages: amount of pages transferred to the target VM
#
# @cache-miss: number of cache miss
#
# @cache-miss-rate: rate of cache miss (since 2.1)
#
# @overflow: number of overflows
#
# Since: 1.2
##
{ 'struct': 'XBZRLECacheStats',
'data': {'cache-size': 'int', 'bytes': 'int', 'pages': 'int',
'cache-miss': 'int', 'cache-miss-rate': 'number',
'overflow': 'int' } }
# @MigrationStatus:
#
# An enumeration of migration status.
#
# @none: no migration has ever happened.
#
# @setup: migration process has been initiated.
#
# @cancelling: in the process of cancelling migration.
#
# @cancelled: cancelling migration is finished.
#
# @active: in the process of doing migration.
#
# @postcopy-active: like active, but now in postcopy mode. (since 2.5)
#
# @completed: migration is finished.
#
# @failed: some error occurred during migration process.
#
# Since: 2.3
#
##
{ 'enum': 'MigrationStatus',
'data': [ 'none', 'setup', 'cancelling', 'cancelled',
'active', 'postcopy-active', 'completed', 'failed' ] }
##
# @MigrationInfo
#
# Information about current migration process.
#
# @status: #optional @MigrationStatus describing the current migration status.
# If this field is not returned, no migration process
# has been initiated
#
# @ram: #optional @MigrationStats containing detailed migration
# status, only returned if status is 'active' or
# 'completed'(since 1.2)
#
# @disk: #optional @MigrationStats containing detailed disk migration
# status, only returned if status is 'active' and it is a block
# migration
#
# @xbzrle-cache: #optional @XBZRLECacheStats containing detailed XBZRLE
# migration statistics, only returned if XBZRLE feature is on and
# status is 'active' or 'completed' (since 1.2)
#
# @total-time: #optional total amount of milliseconds since migration started.
# If migration has ended, it returns the total migration
# time. (since 1.2)
#
# @downtime: #optional only present when migration finishes correctly
# total downtime in milliseconds for the guest.
# (since 1.3)
#
# @expected-downtime: #optional only present while migration is active
# expected downtime in milliseconds for the guest in last walk
# of the dirty bitmap. (since 1.3)
#
# @setup-time: #optional amount of setup time in milliseconds _before_ the
# iterations begin but _after_ the QMP command is issued. This is designed
# to provide an accounting of any activities (such as RDMA pinning) which
# may be expensive, but do not actually occur during the iterative
# migration rounds themselves. (since 1.6)
#
# @cpu-throttle-percentage: #optional percentage of time guest cpus are being
# throttled during auto-converge. This is only present when auto-converge
# has started throttling guest cpus. (Since 2.7)
#
# @error-desc: #optional the human readable error description string, when
# @status is 'failed'. Clients should not attempt to parse the
# error strings. (Since 2.7)
#
# Since: 0.14.0
##
{ 'struct': 'MigrationInfo',
'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats',
'*disk': 'MigrationStats',
'*xbzrle-cache': 'XBZRLECacheStats',
'*total-time': 'int',
'*expected-downtime': 'int',
'*downtime': 'int',
'*setup-time': 'int',
'*cpu-throttle-percentage': 'int',
'*error-desc': 'str'} }
##
# @query-migrate
#
# Returns information about current migration process.
#
# Returns: @MigrationInfo
#
# Since: 0.14.0
##
{ 'command': 'query-migrate', 'returns': 'MigrationInfo' }
##
# @MigrationCapability
#
# Migration capabilities enumeration
#
# @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length Encoding).
# This feature allows us to minimize migration traffic for certain work
# loads, by sending compressed difference of the pages
#
# @rdma-pin-all: Controls whether or not the entire VM memory footprint is
# mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage.
# Disabled by default. (since 2.0)
#
# @zero-blocks: During storage migration encode blocks of zeroes efficiently. This
# essentially saves 1MB of zeroes per block on the wire. Enabling requires
# source and target VM to support this feature. To enable it is sufficient
# to enable the capability on the source VM. The feature is disabled by
# default. (since 1.6)
#
# @compress: Use multiple compression threads to accelerate live migration.
# This feature can help to reduce the migration traffic, by sending
# compressed pages. Please note that if compress and xbzrle are both
# on, compress only takes effect in the ram bulk stage, after that,
# it will be disabled and only xbzrle takes effect, this can help to
# minimize migration traffic. The feature is disabled by default.
# (since 2.4 )
#
# @events: generate events for each migration state change
# (since 2.4 )
#
# @auto-converge: If enabled, QEMU will automatically throttle down the guest
# to speed up convergence of RAM migration. (since 1.6)
#
# @postcopy-ram: Start executing on the migration target before all of RAM has
# been migrated, pulling the remaining pages along as needed. NOTE: If
# the migration fails during postcopy the VM will fail. (since 2.6)
#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
'compress', 'events', 'postcopy-ram'] }
##
# @MigrationCapabilityStatus
#
# Migration capability information
#
# @capability: capability enum
#
# @state: capability state bool
#
# Since: 1.2
##
{ 'struct': 'MigrationCapabilityStatus',
'data': { 'capability' : 'MigrationCapability', 'state' : 'bool' } }
##
# @migrate-set-capabilities
#
# Enable/Disable the following migration capabilities (like xbzrle)
#
# @capabilities: json array of capability modifications to make
#
# Since: 1.2
##
{ 'command': 'migrate-set-capabilities',
'data': { 'capabilities': ['MigrationCapabilityStatus'] } }
##
# @query-migrate-capabilities
#
# Returns information about the current migration capabilities status
#
# Returns: @MigrationCapabilitiesStatus
#
# Since: 1.2
##
{ 'command': 'query-migrate-capabilities', 'returns': ['MigrationCapabilityStatus']}
# @MigrationParameter
#
# Migration parameters enumeration
#
# @compress-level: Set the compression level to be used in live migration,
# the compression level is an integer between 0 and 9, where 0 means
# no compression, 1 means the best compression speed, and 9 means best
# compression ratio which will consume more CPU.
#
# @compress-threads: Set compression thread count to be used in live migration,
# the compression thread count is an integer between 1 and 255.
#
# @decompress-threads: Set decompression thread count to be used in live
# migration, the decompression thread count is an integer between 1
# and 255. Usually, decompression is at least 4 times as fast as
# compression, so set the decompress-threads to the number about 1/4
# of compress-threads is adequate.
#
# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
# when migration auto-converge is activated. The
# default value is 20. (Since 2.7)
#
# @cpu-throttle-increment: throttle percentage increase each time
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.7)
#
# @tls-creds: ID of the 'tls-creds' object that provides credentials for
# establishing a TLS connection over the migration data channel.
# On the outgoing side of the migration, the credentials must
# be for a 'client' endpoint, while for the incoming side the
# credentials must be for a 'server' endpoint. Setting this
# will enable TLS for all migrations. The default is unset,
# resulting in unsecured migration at the QEMU level. (Since 2.7)
#
# @tls-hostname: hostname of the target host for the migration. This is
# required when using x509 based TLS credentials and the
# migration URI does not already include a hostname. For
# example if using fd: or exec: based migration, the
# hostname must be provided so that the server's x509
# certificate identity can be validated. (Since 2.7)
#
# Since: 2.4
##
{ 'enum': 'MigrationParameter',
'data': ['compress-level', 'compress-threads', 'decompress-threads',
'cpu-throttle-initial', 'cpu-throttle-increment',
'tls-creds', 'tls-hostname'] }
#
# @migrate-set-parameters
#
# Set the following migration parameters
#
# @compress-level: compression level
#
# @compress-threads: compression thread count
#
# @decompress-threads: decompression thread count
#
# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
# when migration auto-converge is activated. The
# default value is 20. (Since 2.7)
#
# @cpu-throttle-increment: throttle percentage increase each time
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.7)
#
# @tls-creds: ID of the 'tls-creds' object that provides credentials for
# establishing a TLS connection over the migration data channel.
# On the outgoing side of the migration, the credentials must
# be for a 'client' endpoint, while for the incoming side the
# credentials must be for a 'server' endpoint. Setting this
# will enable TLS for all migrations. The default is unset,
# resulting in unsecured migration at the QEMU level. (Since 2.7)
#
# @tls-hostname: hostname of the target host for the migration. This is
# required when using x509 based TLS credentials and the
# migration URI does not already include a hostname. For
# example if using fd: or exec: based migration, the
# hostname must be provided so that the server's x509
# certificate identity can be validated. (Since 2.7)
#
# Since: 2.4
##
{ 'command': 'migrate-set-parameters',
'data': { '*compress-level': 'int',
'*compress-threads': 'int',
'*decompress-threads': 'int',
'*cpu-throttle-initial': 'int',
'*cpu-throttle-increment': 'int',
'*tls-creds': 'str',
'*tls-hostname': 'str'} }
#
# @MigrationParameters
#
# @compress-level: compression level
#
# @compress-threads: compression thread count
#
# @decompress-threads: decompression thread count
#
# @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
# when migration auto-converge is activated. The
# default value is 20. (Since 2.7)
#
# @cpu-throttle-increment: throttle percentage increase each time
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.7)
#
# @tls-creds: ID of the 'tls-creds' object that provides credentials for
# establishing a TLS connection over the migration data channel.
# On the outgoing side of the migration, the credentials must
# be for a 'client' endpoint, while for the incoming side the
# credentials must be for a 'server' endpoint. Setting this
# will enable TLS for all migrations. The default is unset,
# resulting in unsecured migration at the QEMU level. (Since 2.7)
#
# @tls-hostname: hostname of the target host for the migration. This is
# required when using x509 based TLS credentials and the
# migration URI does not already include a hostname. For
# example if using fd: or exec: based migration, the
# hostname must be provided so that the server's x509
# certificate identity can be validated. (Since 2.7)
#
# Since: 2.4
##
{ 'struct': 'MigrationParameters',
'data': { 'compress-level': 'int',
'compress-threads': 'int',
'decompress-threads': 'int',
'cpu-throttle-initial': 'int',
'cpu-throttle-increment': 'int',
'tls-creds': 'str',
'tls-hostname': 'str'} }
##
# @query-migrate-parameters
#
# Returns information about the current migration parameters
#
# Returns: @MigrationParameters
#
# Since: 2.4
##
{ 'command': 'query-migrate-parameters',
'returns': 'MigrationParameters' }
##
# @client_migrate_info
#
# Set migration information for remote display. This makes the server
# ask the client to automatically reconnect using the new parameters
# once migration finished successfully. Only implemented for SPICE.
#
# @protocol: must be "spice"
# @hostname: migration target hostname
# @port: #optional spice tcp port for plaintext channels
# @tls-port: #optional spice tcp port for tls-secured channels
# @cert-subject: #optional server certificate subject
#
# Since: 0.14.0
##
{ 'command': 'client_migrate_info',
'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int',
'*tls-port': 'int', '*cert-subject': 'str' } }
##
# @migrate-start-postcopy
#
# Followup to a migration command to switch the migration to postcopy mode.
# The postcopy-ram capability must be set before the original migration
# command.
#
# Since: 2.5
{ 'command': 'migrate-start-postcopy' }
##
# @MouseInfo:
#
# Information about a mouse device.
#
# @name: the name of the mouse device
#
# @index: the index of the mouse device
#
# @current: true if this device is currently receiving mouse events
#
# @absolute: true if this device supports absolute coordinates as input
#
# Since: 0.14.0
##
{ 'struct': 'MouseInfo',
'data': {'name': 'str', 'index': 'int', 'current': 'bool',
'absolute': 'bool'} }
##
# @query-mice:
#
# Returns information about each active mouse device
#
# Returns: a list of @MouseInfo for each device
#
# Since: 0.14.0
##
{ 'command': 'query-mice', 'returns': ['MouseInfo'] }
##
# @CpuInfoArch:
#
# An enumeration of cpu types that enable additional information during
# @query-cpus.
#
# Since: 2.6
##
{ 'enum': 'CpuInfoArch',
'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 'other' ] }
##
# @CpuInfo:
#
# Information about a virtual CPU
#
# @CPU: the index of the virtual CPU
#
# @current: this only exists for backwards compatibility and should be ignored
#
# @halted: true if the virtual CPU is in the halt state. Halt usually refers
# to a processor specific low power mode.
#
# @qom_path: path to the CPU object in the QOM tree (since 2.4)
#
# @thread_id: ID of the underlying host thread
#
# @arch: architecture of the cpu, which determines which additional fields
# will be listed (since 2.6)
#
# Since: 0.14.0
#
# Notes: @halted is a transient state that changes frequently. By the time the
# data is sent to the client, the guest may no longer be halted.
##
{ 'union': 'CpuInfo',
'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool',
'qom_path': 'str', 'thread_id': 'int', 'arch': 'CpuInfoArch' },
'discriminator': 'arch',
'data': { 'x86': 'CpuInfoX86',
'sparc': 'CpuInfoSPARC',
'ppc': 'CpuInfoPPC',
'mips': 'CpuInfoMIPS',
'tricore': 'CpuInfoTricore',
'other': 'CpuInfoOther' } }
##
# @CpuInfoX86:
#
# Additional information about a virtual i386 or x86_64 CPU
#
# @pc: the 64-bit instruction pointer
#
# Since 2.6
##
{ 'struct': 'CpuInfoX86', 'data': { 'pc': 'int' } }
##
# @CpuInfoSPARC:
#
# Additional information about a virtual SPARC CPU
#
# @pc: the PC component of the instruction pointer
#
# @npc: the NPC component of the instruction pointer
#
# Since 2.6
##
{ 'struct': 'CpuInfoSPARC', 'data': { 'pc': 'int', 'npc': 'int' } }
##
# @CpuInfoPPC:
#
# Additional information about a virtual PPC CPU
#
# @nip: the instruction pointer
#
# Since 2.6
##
{ 'struct': 'CpuInfoPPC', 'data': { 'nip': 'int' } }
##
# @CpuInfoMIPS:
#
# Additional information about a virtual MIPS CPU
#
# @PC: the instruction pointer
#
# Since 2.6
##
{ 'struct': 'CpuInfoMIPS', 'data': { 'PC': 'int' } }
##
# @CpuInfoTricore:
#
# Additional information about a virtual Tricore CPU
#
# @PC: the instruction pointer
#
# Since 2.6
##
{ 'struct': 'CpuInfoTricore', 'data': { 'PC': 'int' } }
##
# @CpuInfoOther:
#
# No additional information is available about the virtual CPU
#
# Since 2.6
#
##
{ 'struct': 'CpuInfoOther', 'data': { } }
##
# @query-cpus:
#
# Returns a list of information about each virtual CPU.
#
# Returns: a list of @CpuInfo for each virtual CPU
#
# Since: 0.14.0
##
{ 'command': 'query-cpus', 'returns': ['CpuInfo'] }
##
# @IOThreadInfo:
#
# Information about an iothread
#
# @id: the identifier of the iothread
#
# @thread-id: ID of the underlying host thread
#
# Since: 2.0
##
{ 'struct': 'IOThreadInfo',
'data': {'id': 'str', 'thread-id': 'int'} }
##
# @query-iothreads:
#
# Returns a list of information about each iothread.
#
# Note this list excludes the QEMU main loop thread, which is not declared
# using the -object iothread command-line option. It is always the main thread
# of the process.
#
# Returns: a list of @IOThreadInfo for each iothread
#
# Since: 2.0
##
{ 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] }
##
# @NetworkAddressFamily
#
# The network address family
#
# @ipv4: IPV4 family
#
# @ipv6: IPV6 family
#
# @unix: unix socket
#
# @unknown: otherwise
#
# Since: 2.1
##
{ 'enum': 'NetworkAddressFamily',
'data': [ 'ipv4', 'ipv6', 'unix', 'unknown' ] }
##
# @VncBasicInfo
#
# The basic information for vnc network connection
#
# @host: IP address
#
# @service: The service name of the vnc port. This may depend on the host
# system's service database so symbolic names should not be relied
# on.
#
# @family: address family
#
# @websocket: true in case the socket is a websocket (since 2.3).
#
# Since: 2.1
##
{ 'struct': 'VncBasicInfo',
'data': { 'host': 'str',
'service': 'str',
'family': 'NetworkAddressFamily',
'websocket': 'bool' } }
##
# @VncServerInfo
#
# The network connection information for server
#
# @auth: #optional, authentication method
#
# Since: 2.1
##
{ 'struct': 'VncServerInfo',
'base': 'VncBasicInfo',
'data': { '*auth': 'str' } }
##
# @VncClientInfo:
#
# Information about a connected VNC client.
#
# @x509_dname: #optional If x509 authentication is in use, the Distinguished
# Name of the client.
#
# @sasl_username: #optional If SASL authentication is in use, the SASL username
# used for authentication.
#
# Since: 0.14.0
##
{ 'struct': 'VncClientInfo',
'base': 'VncBasicInfo',
'data': { '*x509_dname': 'str', '*sasl_username': 'str' } }
##
# @VncInfo:
#
# Information about the VNC session.
#
# @enabled: true if the VNC server is enabled, false otherwise
#
# @host: #optional The hostname the VNC server is bound to. This depends on
# the name resolution on the host and may be an IP address.
#
# @family: #optional 'ipv6' if the host is listening for IPv6 connections
# 'ipv4' if the host is listening for IPv4 connections
# 'unix' if the host is listening on a unix domain socket
# 'unknown' otherwise
#
# @service: #optional The service name of the server's port. This may depends
# on the host system's service database so symbolic names should not
# be relied on.
#
# @auth: #optional the current authentication type used by the server
# 'none' if no authentication is being used
# 'vnc' if VNC authentication is being used
# 'vencrypt+plain' if VEncrypt is used with plain text authentication
# 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
# 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
# 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
# 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
# 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
# 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
# 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
# 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
#
# @clients: a list of @VncClientInfo of all currently connected clients
#
# Since: 0.14.0
##
{ 'struct': 'VncInfo',
'data': {'enabled': 'bool', '*host': 'str',
'*family': 'NetworkAddressFamily',
'*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} }
##
# @VncPriAuth:
#
# vnc primary authentication method.
#
# Since: 2.3
##
{ 'enum': 'VncPrimaryAuth',
'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
'tls', 'vencrypt', 'sasl' ] }
##
# @VncVencryptSubAuth:
#
# vnc sub authentication method with vencrypt.
#
# Since: 2.3
##
{ 'enum': 'VncVencryptSubAuth',
'data': [ 'plain',
'tls-none', 'x509-none',
'tls-vnc', 'x509-vnc',
'tls-plain', 'x509-plain',
'tls-sasl', 'x509-sasl' ] }
##
# @VncInfo2:
#
# Information about a vnc server
#
# @id: vnc server name.
#
# @server: A list of @VncBasincInfo describing all listening sockets.
# The list can be empty (in case the vnc server is disabled).
# It also may have multiple entries: normal + websocket,
# possibly also ipv4 + ipv6 in the future.
#
# @clients: A list of @VncClientInfo of all currently connected clients.
# The list can be empty, for obvious reasons.
#
# @auth: The current authentication type used by the server
#
# @vencrypt: #optional The vencrypt sub authentication type used by the server,
# only specified in case auth == vencrypt.
#
# @display: #optional The display device the vnc server is linked to.
#
# Since: 2.3
##
{ 'struct': 'VncInfo2',
'data': { 'id' : 'str',
'server' : ['VncBasicInfo'],
'clients' : ['VncClientInfo'],
'auth' : 'VncPrimaryAuth',
'*vencrypt' : 'VncVencryptSubAuth',
'*display' : 'str' } }
##
# @query-vnc:
#
# Returns information about the current VNC server
#
# Returns: @VncInfo
#
# Since: 0.14.0
##
{ 'command': 'query-vnc', 'returns': 'VncInfo' }
##
# @query-vnc-servers:
#
# Returns a list of vnc servers. The list can be empty.
#
# Returns: a list of @VncInfo2
#
# Since: 2.3
##
{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'] }
##
# @SpiceBasicInfo
#
# The basic information for SPICE network connection
#
# @host: IP address
#
# @port: port number
#
# @family: address family
#
# Since: 2.1
##
{ 'struct': 'SpiceBasicInfo',
'data': { 'host': 'str',
'port': 'str',
'family': 'NetworkAddressFamily' } }
##
# @SpiceServerInfo
#
# Information about a SPICE server
#
# @auth: #optional, authentication method
#
# Since: 2.1
##
{ 'struct': 'SpiceServerInfo',
'base': 'SpiceBasicInfo',
'data': { '*auth': 'str' } }
##
# @SpiceChannel
#
# Information about a SPICE client channel.
#
# @connection-id: SPICE connection id number. All channels with the same id
# belong to the same SPICE session.
#
# @channel-type: SPICE channel type number. "1" is the main control
# channel, filter for this one if you want to track spice
# sessions only
#
# @channel-id: SPICE channel ID number. Usually "0", might be different when
# multiple channels of the same type exist, such as multiple
# display channels in a multihead setup
#
# @tls: true if the channel is encrypted, false otherwise.
#
# Since: 0.14.0
##
{ 'struct': 'SpiceChannel',
'base': 'SpiceBasicInfo',
'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
'tls': 'bool'} }
##
# @SpiceQueryMouseMode
#
# An enumeration of Spice mouse states.
#
# @client: Mouse cursor position is determined by the client.
#
# @server: Mouse cursor position is determined by the server.
#
# @unknown: No information is available about mouse mode used by
# the spice server.
#
# Note: spice/enums.h has a SpiceMouseMode already, hence the name.
#
# Since: 1.1
##
{ 'enum': 'SpiceQueryMouseMode',
'data': [ 'client', 'server', 'unknown' ] }
##
# @SpiceInfo
#
# Information about the SPICE session.
#
# @enabled: true if the SPICE server is enabled, false otherwise
#
# @migrated: true if the last guest migration completed and spice
# migration had completed as well. false otherwise.
#
# @host: #optional The hostname the SPICE server is bound to. This depends on
# the name resolution on the host and may be an IP address.
#
# @port: #optional The SPICE server's port number.
#
# @compiled-version: #optional SPICE server version.
#
# @tls-port: #optional The SPICE server's TLS port number.
#
# @auth: #optional the current authentication type used by the server
# 'none' if no authentication is being used
# 'spice' uses SASL or direct TLS authentication, depending on command
# line options
#
# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
# be determined by the client or the server, or unknown if spice
# server doesn't provide this information.
#
# Since: 1.1
#
# @channels: a list of @SpiceChannel for each active spice channel
#
# Since: 0.14.0
##
{ 'struct': 'SpiceInfo',
'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int',
'*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']} }
##
# @query-spice
#
# Returns information about the current SPICE server
#
# Returns: @SpiceInfo
#
# Since: 0.14.0
##
{ 'command': 'query-spice', 'returns': 'SpiceInfo' }
##
# @BalloonInfo:
#
# Information about the guest balloon device.
#
# @actual: the number of bytes the balloon currently contains
#
# Since: 0.14.0
#
##
{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
##
# @query-balloon:
#
# Return information about the balloon device.
#
# Returns: @BalloonInfo on success
# If the balloon driver is enabled but not functional because the KVM
# kernel module cannot support it, KvmMissingCap
# If no balloon device is present, DeviceNotActive
#
# Since: 0.14.0
##
{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }
##
# @PciMemoryRange:
#
# A PCI device memory region
#
# @base: the starting address (guest physical)
#
# @limit: the ending address (guest physical)
#
# Since: 0.14.0
##
{ 'struct': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} }
##
# @PciMemoryRegion
#
# Information about a PCI device I/O region.
#
# @bar: the index of the Base Address Register for this region
#
# @type: 'io' if the region is a PIO region
# 'memory' if the region is a MMIO region
#
# @prefetch: #optional if @type is 'memory', true if the memory is prefetchable
#
# @mem_type_64: #optional if @type is 'memory', true if the BAR is 64-bit
#
# Since: 0.14.0
##
{ 'struct': 'PciMemoryRegion',
'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int',
'*prefetch': 'bool', '*mem_type_64': 'bool' } }
##
# @PciBusInfo:
#
# Information about a bus of a PCI Bridge device
#
# @number: primary bus interface number. This should be the number of the
# bus the device resides on.
#
# @secondary: secondary bus interface number. This is the number of the
# main bus for the bridge
#
# @subordinate: This is the highest number bus that resides below the
# bridge.
#
# @io_range: The PIO range for all devices on this bridge
#
# @memory_range: The MMIO range for all devices on this bridge
#
# @prefetchable_range: The range of prefetchable MMIO for all devices on
# this bridge
#
# Since: 2.4
##
{ 'struct': 'PciBusInfo',
'data': {'number': 'int', 'secondary': 'int', 'subordinate': 'int',
'io_range': 'PciMemoryRange',
'memory_range': 'PciMemoryRange',
'prefetchable_range': 'PciMemoryRange' } }
##
# @PciBridgeInfo:
#
# Information about a PCI Bridge device
#
# @bus: information about the bus the device resides on
#
# @devices: a list of @PciDeviceInfo for each device on this bridge
#
# Since: 0.14.0
##
{ 'struct': 'PciBridgeInfo',
'data': {'bus': 'PciBusInfo', '*devices': ['PciDeviceInfo']} }
##
# @PciDeviceClass:
#
# Information about the Class of a PCI device
#
# @desc: #optional a string description of the device's class
#
# @class: the class code of the device
#
# Since: 2.4
##
{ 'struct': 'PciDeviceClass',
'data': {'*desc': 'str', 'class': 'int'} }
##
# @PciDeviceId:
#
# Information about the Id of a PCI device
#
# @device: the PCI device id
#
# @vendor: the PCI vendor id
#
# Since: 2.4
##
{ 'struct': 'PciDeviceId',
'data': {'device': 'int', 'vendor': 'int'} }
##
# @PciDeviceInfo:
#
# Information about a PCI device
#
# @bus: the bus number of the device
#
# @slot: the slot the device is located in
#
# @function: the function of the slot used by the device
#
# @class_info: the class of the device
#
# @id: the PCI device id
#
# @irq: #optional if an IRQ is assigned to the device, the IRQ number
#
# @qdev_id: the device name of the PCI device
#
# @pci_bridge: if the device is a PCI bridge, the bridge information
#
# @regions: a list of the PCI I/O regions associated with the device
#
# Notes: the contents of @class_info.desc are not stable and should only be
# treated as informational.
#
# Since: 0.14.0
##
{ 'struct': 'PciDeviceInfo',
'data': {'bus': 'int', 'slot': 'int', 'function': 'int',
'class_info': 'PciDeviceClass', 'id': 'PciDeviceId',
'*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo',
'regions': ['PciMemoryRegion']} }
##
# @PciInfo:
#
# Information about a PCI bus
#
# @bus: the bus index
#
# @devices: a list of devices on this bus
#
# Since: 0.14.0
##
{ 'struct': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} }
##
# @query-pci:
#
# Return information about the PCI bus topology of the guest.
#
# Returns: a list of @PciInfo for each PCI bus
#
# Since: 0.14.0
##
{ 'command': 'query-pci', 'returns': ['PciInfo'] }
##
# @quit:
#
# This command will cause the QEMU process to exit gracefully. While every
# attempt is made to send the QMP response before terminating, this is not
# guaranteed. When using this interface, a premature EOF would not be
# unexpected.
#
# Since: 0.14.0
##
{ 'command': 'quit' }
##
# @stop:
#
# Stop all guest VCPU execution.
#
# Since: 0.14.0
#
# Notes: This function will succeed even if the guest is already in the stopped
# state. In "inmigrate" state, it will ensure that the guest
# remains paused once migration finishes, as if the -S option was
# passed on the command line.
##
{ 'command': 'stop' }
##
# @system_reset:
#
# Performs a hard reset of a guest.
#
# Since: 0.14.0
##
{ 'command': 'system_reset' }
##
# @system_powerdown:
#
# Requests that a guest perform a powerdown operation.
#
# Since: 0.14.0
#
# Notes: A guest may or may not respond to this command. This command
# returning does not indicate that a guest has accepted the request or
# that it has shut down. Many guests will respond to this command by
# prompting the user in some way.
##
{ 'command': 'system_powerdown' }
##
# @cpu:
#
# This command is a nop that is only provided for the purposes of compatibility.
#
# Since: 0.14.0
#
# Notes: Do not use this command.
##
{ 'command': 'cpu', 'data': {'index': 'int'} }
##
# @cpu-add
#
# Adds CPU with specified ID
#
# @id: ID of CPU to be created, valid values [0..max_cpus)
#
# Returns: Nothing on success
#
# Since 1.5
##
{ 'command': 'cpu-add', 'data': {'id': 'int'} }
##
# @memsave:
#
# Save a portion of guest memory to a file.
#
# @val: the virtual address of the guest to start from
#
# @size: the size of memory region to save
#
# @filename: the file to save the memory to as binary data
#
# @cpu-index: #optional the index of the virtual CPU to use for translating the
# virtual address (defaults to CPU 0)
#
# Returns: Nothing on success
#
# Since: 0.14.0
#
# Notes: Errors were not reliably returned until 1.1
##
{ 'command': 'memsave',
'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index': 'int'} }
##
# @pmemsave:
#
# Save a portion of guest physical memory to a file.
#
# @val: the physical address of the guest to start from
#
# @size: the size of memory region to save
#
# @filename: the file to save the memory to as binary data
#
# Returns: Nothing on success
#
# Since: 0.14.0
#
# Notes: Errors were not reliably returned until 1.1
##
{ 'command': 'pmemsave',
'data': {'val': 'int', 'size': 'int', 'filename': 'str'} }
##
# @cont:
#
# Resume guest VCPU execution.
#
# Since: 0.14.0
#
# Returns: If successful, nothing
# If QEMU was started with an encrypted block device and a key has
# not yet been set, DeviceEncrypted.
#
# Notes: This command will succeed if the guest is currently running. It
# will also succeed if the guest is in the "inmigrate" state; in
# this case, the effect of the command is to make sure the guest
# starts once migration finishes, removing the effect of the -S
# command line option if it was passed.
##
{ 'command': 'cont' }
##
# @system_wakeup:
#
# Wakeup guest from suspend. Does nothing in case the guest isn't suspended.
#
# Since: 1.1
#
# Returns: nothing.
##
{ 'command': 'system_wakeup' }
##
# @inject-nmi:
#
# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64).
#
# Returns: If successful, nothing
#
# Since: 0.14.0
#
# Note: prior to 2.1, this command was only supported for x86 and s390 VMs
##
{ 'command': 'inject-nmi' }
##
# @set_link:
#
# Sets the link status of a virtual network adapter.
#
# @name: the device name of the virtual network adapter
#
# @up: true to set the link status to be up
#
# Returns: Nothing on success
# If @name is not a valid network device, DeviceNotFound
#
# Since: 0.14.0
#
# Notes: Not all network adapters support setting link status. This command
# will succeed even if the network adapter does not support link status
# notification.
##
{ 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} }
##
# @balloon:
#
# Request the balloon driver to change its balloon size.
#
# @value: the target size of the balloon in bytes
#
# Returns: Nothing on success
# If the balloon driver is enabled but not functional because the KVM
# kernel module cannot support it, KvmMissingCap
# If no balloon device is present, DeviceNotActive
#
# Notes: This command just issues a request to the guest. When it returns,
# the balloon size may not have changed. A guest can change the balloon
# size independent of this command.
#
# Since: 0.14.0
##
{ 'command': 'balloon', 'data': {'value': 'int'} }
##
# @Abort
#
# This action can be used to test transaction failure.
#
# Since: 1.6
###
{ 'struct': 'Abort',
'data': { } }
##
# @ActionCompletionMode
#
# An enumeration of Transactional completion modes.
#
# @individual: Do not attempt to cancel any other Actions if any Actions fail
# after the Transaction request succeeds. All Actions that
# can complete successfully will do so without waiting on others.
# This is the default.
#
# @grouped: If any Action fails after the Transaction succeeds, cancel all
# Actions. Actions do not complete until all Actions are ready to
# complete. May be rejected by Actions that do not support this
# completion mode.
#
# Since: 2.5
##
{ 'enum': 'ActionCompletionMode',
'data': [ 'individual', 'grouped' ] }
##
# @TransactionAction
#
# A discriminated record of operations that can be performed with
# @transaction.
#
# Since 1.1
#
# drive-backup since 1.6
# abort since 1.6
# blockdev-snapshot-internal-sync since 1.7
# blockdev-backup since 2.3
# blockdev-snapshot since 2.5
# block-dirty-bitmap-add since 2.5
# block-dirty-bitmap-clear since 2.5
##
{ 'union': 'TransactionAction',
'data': {
'blockdev-snapshot': 'BlockdevSnapshot',
'blockdev-snapshot-sync': 'BlockdevSnapshotSync',
'drive-backup': 'DriveBackup',
'blockdev-backup': 'BlockdevBackup',
'abort': 'Abort',
'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal',
'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd',
'block-dirty-bitmap-clear': 'BlockDirtyBitmap'
} }
##
# @TransactionProperties
#
# Optional arguments to modify the behavior of a Transaction.
#
# @completion-mode: #optional Controls how jobs launched asynchronously by
# Actions will complete or fail as a group.
# See @ActionCompletionMode for details.
#
# Since: 2.5
##
{ 'struct': 'TransactionProperties',
'data': {
'*completion-mode': 'ActionCompletionMode'
}
}
##
# @transaction
#
# Executes a number of transactionable QMP commands atomically. If any
# operation fails, then the entire set of actions will be abandoned and the
# appropriate error returned.
#
# @actions: List of @TransactionAction;
# information needed for the respective operations.
#
# @properties: #optional structure of additional options to control the
# execution of the transaction. See @TransactionProperties
# for additional detail.
#
# Returns: nothing on success
# Errors depend on the operations of the transaction
#
# Note: The transaction aborts on the first failure. Therefore, there will be
# information on only one failed operation returned in an error condition, and
# subsequent actions will not have been attempted.
#
# Since 1.1
##
{ 'command': 'transaction',
'data': { 'actions': [ 'TransactionAction' ],
'*properties': 'TransactionProperties'
}
}
##
# @human-monitor-command:
#
# Execute a command on the human monitor and return the output.
#
# @command-line: the command to execute in the human monitor
#
# @cpu-index: #optional The CPU to use for commands that require an implicit CPU
#
# Returns: the output of the command as a string
#
# Since: 0.14.0
#
# Notes: This command only exists as a stop-gap. Its use is highly
# discouraged. The semantics of this command are not guaranteed.
#
# Known limitations:
#
# o This command is stateless, this means that commands that depend
# on state information (such as getfd) might not work
#
# o Commands that prompt the user for data (eg. 'cont' when the block
# device is encrypted) don't currently work
##
{ 'command': 'human-monitor-command',
'data': {'command-line': 'str', '*cpu-index': 'int'},
'returns': 'str' }
##
# @migrate_cancel
#
# Cancel the current executing migration process.
#
# Returns: nothing on success
#
# Notes: This command succeeds even if there is no migration process running.
#
# Since: 0.14.0
##
{ 'command': 'migrate_cancel' }
##
# @migrate_set_downtime
#
# Set maximum tolerated downtime for migration.
#
# @value: maximum downtime in seconds
#
# Returns: nothing on success
#
# Since: 0.14.0
##
{ 'command': 'migrate_set_downtime', 'data': {'value': 'number'} }
##
# @migrate_set_speed
#
# Set maximum speed for migration.
#
# @value: maximum speed in bytes.
#
# Returns: nothing on success
#
# Notes: A value lesser than zero will be automatically round up to zero.
#
# Since: 0.14.0
##
{ 'command': 'migrate_set_speed', 'data': {'value': 'int'} }
##
# @migrate-set-cache-size
#
# Set XBZRLE cache size
#
# @value: cache size in bytes
#
# The size will be rounded down to the nearest power of 2.
# The cache size can be modified before and during ongoing migration
#
# Returns: nothing on success
#
# Since: 1.2
##
{ 'command': 'migrate-set-cache-size', 'data': {'value': 'int'} }
##
# @query-migrate-cache-size
#
# query XBZRLE cache size
#
# Returns: XBZRLE cache size in bytes
#
# Since: 1.2
##
{ 'command': 'query-migrate-cache-size', 'returns': 'int' }
##
# @ObjectPropertyInfo:
#
# @name: the name of the property
#
# @type: the type of the property. This will typically come in one of four
# forms:
#
# 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'.
# These types are mapped to the appropriate JSON type.
#
# 2) A child type in the form 'child<subtype>' where subtype is a qdev
# device type name. Child properties create the composition tree.
#
# 3) A link type in the form 'link<subtype>' where subtype is a qdev
# device type name. Link properties form the device model graph.
#
# Since: 1.2
##
{ 'struct': 'ObjectPropertyInfo',
'data': { 'name': 'str', 'type': 'str' } }
##
# @qom-list:
#
# This command will list any properties of a object given a path in the object
# model.
#
# @path: the path within the object model. See @qom-get for a description of
# this parameter.
#
# Returns: a list of @ObjectPropertyInfo that describe the properties of the
# object.
#
# Since: 1.2
##
{ 'command': 'qom-list',
'data': { 'path': 'str' },
'returns': [ 'ObjectPropertyInfo' ] }
##
# @qom-get:
#
# This command will get a property from a object model path and return the
# value.
#
# @path: The path within the object model. There are two forms of supported
# paths--absolute and partial paths.
#
# Absolute paths are derived from the root object and can follow child<>
# or link<> properties. Since they can follow link<> properties, they
# can be arbitrarily long. Absolute paths look like absolute filenames
# and are prefixed with a leading slash.
#
# Partial paths look like relative filenames. They do not begin
# with a prefix. The matching rules for partial paths are subtle but
# designed to make specifying objects easy. At each level of the
# composition tree, the partial path is matched as an absolute path.
# The first match is not returned. At least two matches are searched
# for. A successful result is only returned if only one match is
# found. If more than one match is found, a flag is return to
# indicate that the match was ambiguous.
#
# @property: The property name to read
#
# Returns: The property value. The type depends on the property
# type. child<> and link<> properties are returned as #str
# pathnames. All integer property types (u8, u16, etc) are
# returned as #int.
#
# Since: 1.2
##
{ 'command': 'qom-get',
'data': { 'path': 'str', 'property': 'str' },
'returns': 'any' }
##
# @qom-set:
#
# This command will set a property from a object model path.
#
# @path: see @qom-get for a description of this parameter
#
# @property: the property name to set
#
# @value: a value who's type is appropriate for the property type. See @qom-get
# for a description of type mapping.
#
# Since: 1.2
##
{ 'command': 'qom-set',
'data': { 'path': 'str', 'property': 'str', 'value': 'any' } }
##
# @set_password:
#
# Sets the password of a remote display session.
#
# @protocol: `vnc' to modify the VNC server password
# `spice' to modify the Spice server password
#
# @password: the new password
#
# @connected: #optional how to handle existing clients when changing the
# password. If nothing is specified, defaults to `keep'
# `fail' to fail the command if clients are connected
# `disconnect' to disconnect existing clients
# `keep' to maintain existing clients
#
# Returns: Nothing on success
# If Spice is not enabled, DeviceNotFound
#
# Since: 0.14.0
##
{ 'command': 'set_password',
'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
##
# @expire_password:
#
# Expire the password of a remote display server.
#
# @protocol: the name of the remote display protocol `vnc' or `spice'
#
# @time: when to expire the password.
# `now' to expire the password immediately
# `never' to cancel password expiration
# `+INT' where INT is the number of seconds from now (integer)
# `INT' where INT is the absolute time in seconds
#
# Returns: Nothing on success
# If @protocol is `spice' and Spice is not active, DeviceNotFound
#
# Since: 0.14.0
#
# Notes: Time is relative to the server and currently there is no way to
# coordinate server time with client time. It is not recommended to
# use the absolute time version of the @time parameter unless you're
# sure you are on the same machine as the QEMU instance.
##
{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
##
# @change-vnc-password:
#
# Change the VNC server password.
#
# @password: the new password to use with VNC authentication
#
# Since: 1.1
#
# Notes: An empty password in this command will set the password to the empty
# string. Existing clients are unaffected by executing this command.
##
{ 'command': 'change-vnc-password', 'data': {'password': 'str'} }
##
# @change:
#
# This command is multiple commands multiplexed together.
#
# @device: This is normally the name of a block device but it may also be 'vnc'.
# when it's 'vnc', then sub command depends on @target
#
# @target: If @device is a block device, then this is the new filename.
# If @device is 'vnc', then if the value 'password' selects the vnc
# change password command. Otherwise, this specifies a new server URI
# address to listen to for VNC connections.
#
# @arg: If @device is a block device, then this is an optional format to open
# the device with.
# If @device is 'vnc' and @target is 'password', this is the new VNC
# password to set. If this argument is an empty string, then no future
# logins will be allowed.
#
# Returns: Nothing on success.
# If @device is not a valid block device, DeviceNotFound
# If the new block device is encrypted, DeviceEncrypted. Note that
# if this error is returned, the device has been opened successfully
# and an additional call to @block_passwd is required to set the
# device's password. The behavior of reads and writes to the block
# device between when these calls are executed is undefined.
#
# Notes: This interface is deprecated, and it is strongly recommended that you
# avoid using it. For changing block devices, use
# blockdev-change-medium; for changing VNC parameters, use
# change-vnc-password.
#
# Since: 0.14.0
##
{ 'command': 'change',
'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }
##
# @ObjectTypeInfo:
#
# This structure describes a search result from @qom-list-types
#
# @name: the type name found in the search
#
# Since: 1.1
#
# Notes: This command is experimental and may change syntax in future releases.
##
{ 'struct': 'ObjectTypeInfo',
'data': { 'name': 'str' } }
##
# @qom-list-types:
#
# This command will return a list of types given search parameters
#
# @implements: if specified, only return types that implement this type name
#
# @abstract: if true, include abstract types in the results
#
# Returns: a list of @ObjectTypeInfo or an empty list if no results are found
#
# Since: 1.1
##
{ 'command': 'qom-list-types',
'data': { '*implements': 'str', '*abstract': 'bool' },
'returns': [ 'ObjectTypeInfo' ] }
##
# @DevicePropertyInfo:
#
# Information about device properties.
#
# @name: the name of the property
# @type: the typename of the property
# @description: #optional if specified, the description of the property.
# (since 2.2)
#
# Since: 1.2
##
{ 'struct': 'DevicePropertyInfo',
'data': { 'name': 'str', 'type': 'str', '*description': 'str' } }
##
# @device-list-properties:
#
# List properties associated with a device.
#
# @typename: the type name of a device
#
# Returns: a list of DevicePropertyInfo describing a devices properties
#
# Since: 1.2
##
{ 'command': 'device-list-properties',
'data': { 'typename': 'str'},
'returns': [ 'DevicePropertyInfo' ] }
##
# @migrate
#
# Migrates the current running guest to another Virtual Machine.
#
# @uri: the Uniform Resource Identifier of the destination VM
#
# @blk: #optional do block migration (full disk copy)
#
# @inc: #optional incremental disk copy migration
#
# @detach: this argument exists only for compatibility reasons and
# is ignored by QEMU
#
# Returns: nothing on success
#
# Since: 0.14.0
##
{ 'command': 'migrate',
'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool', '*detach': 'bool' } }
##
# @migrate-incoming
#
# Start an incoming migration, the qemu must have been started
# with -incoming defer
#
# @uri: The Uniform Resource Identifier identifying the source or
# address to listen on
#
# Returns: nothing on success
#
# Since: 2.3
# Note: It's a bad idea to use a string for the uri, but it needs to stay
# compatible with -incoming and the format of the uri is already exposed
# above libvirt
##
{ 'command': 'migrate-incoming', 'data': {'uri': 'str' } }
# @xen-save-devices-state:
#
# Save the state of all devices to file. The RAM and the block devices
# of the VM are not saved by this command.
#
# @filename: the file to save the state of the devices to as binary
# data. See xen-save-devices-state.txt for a description of the binary
# format.
#
# Returns: Nothing on success
#
# Since: 1.1
##
{ 'command': 'xen-save-devices-state', 'data': {'filename': 'str'} }
##
# @xen-set-global-dirty-log
#
# Enable or disable the global dirty log mode.
#
# @enable: true to enable, false to disable.
#
# Returns: nothing
#
# Since: 1.3
##
{ 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
##
# @device_del:
#
# Remove a device from a guest
#
# @id: the name or QOM path of the device
#
# Returns: Nothing on success
# If @id is not a valid device, DeviceNotFound
#
# Notes: When this command completes, the device may not be removed from the
# guest. Hot removal is an operation that requires guest cooperation.
# This command merely requests that the guest begin the hot removal
# process. Completion of the device removal process is signaled with a
# DEVICE_DELETED event. Guest reset will automatically complete removal
# for all devices.
#
# Since: 0.14.0
##
{ 'command': 'device_del', 'data': {'id': 'str'} }
##
# @DumpGuestMemoryFormat:
#
# An enumeration of guest-memory-dump's format.
#
# @elf: elf format
#
# @kdump-zlib: kdump-compressed format with zlib-compressed
#
# @kdump-lzo: kdump-compressed format with lzo-compressed
#
# @kdump-snappy: kdump-compressed format with snappy-compressed
#
# Since: 2.0
##
{ 'enum': 'DumpGuestMemoryFormat',
'data': [ 'elf', 'kdump-zlib', 'kdump-lzo', 'kdump-snappy' ] }
##
# @dump-guest-memory
#
# Dump guest's memory to vmcore. It is a synchronous operation that can take
# very long depending on the amount of guest memory.
#
# @paging: if true, do paging to get guest's memory mapping. This allows
# using gdb to process the core file.
#
# IMPORTANT: this option can make QEMU allocate several gigabytes
# of RAM. This can happen for a large guest, or a
# malicious guest pretending to be large.
#
# Also, paging=true has the following limitations:
#
# 1. The guest may be in a catastrophic state or can have corrupted
# memory, which cannot be trusted
# 2. The guest can be in real-mode even if paging is enabled. For
# example, the guest uses ACPI to sleep, and ACPI sleep state
# goes in real-mode
# 3. Currently only supported on i386 and x86_64.
#
# @protocol: the filename or file descriptor of the vmcore. The supported
# protocols are:
#
# 1. file: the protocol starts with "file:", and the following
# string is the file's path.
# 2. fd: the protocol starts with "fd:", and the following string
# is the fd's name.
#
# @detach: #optional if true, QMP will return immediately rather than
# waiting for the dump to finish. The user can track progress
# using "query-dump". (since 2.6).
#
# @begin: #optional if specified, the starting physical address.
#
# @length: #optional if specified, the memory size, in bytes. If you don't
# want to dump all guest's memory, please specify the start @begin
# and @length
#
# @format: #optional if specified, the format of guest memory dump. But non-elf
# format is conflict with paging and filter, ie. @paging, @begin and
# @length is not allowed to be specified with non-elf @format at the
# same time (since 2.0)
#
# Returns: nothing on success
#
# Since: 1.2
##
{ 'command': 'dump-guest-memory',
'data': { 'paging': 'bool', 'protocol': 'str', '*detach': 'bool',
'*begin': 'int', '*length': 'int',
'*format': 'DumpGuestMemoryFormat'} }
##
# @DumpStatus
#
# Describe the status of a long-running background guest memory dump.
#
# @none: no dump-guest-memory has started yet.
#
# @active: there is one dump running in background.
#
# @completed: the last dump has finished successfully.
#
# @failed: the last dump has failed.
#
# Since 2.6
##
{ 'enum': 'DumpStatus',
'data': [ 'none', 'active', 'completed', 'failed' ] }
##
# @DumpQueryResult
#
# The result format for 'query-dump'.
#
# @status: enum of @DumpStatus, which shows current dump status
#
# @completed: bytes written in latest dump (uncompressed)
#
# @total: total bytes to be written in latest dump (uncompressed)
#
# Since 2.6
##
{ 'struct': 'DumpQueryResult',
'data': { 'status': 'DumpStatus',
'completed': 'int',
'total': 'int' } }
##
# @query-dump
#
# Query latest dump status.
#
# Returns: A @DumpStatus object showing the dump status.
#
# Since: 2.6
##
{ 'command': 'query-dump', 'returns': 'DumpQueryResult' }
##
# @DumpGuestMemoryCapability:
#
# A list of the available formats for dump-guest-memory
#
# Since: 2.0
##
{ 'struct': 'DumpGuestMemoryCapability',
'data': {
'formats': ['DumpGuestMemoryFormat'] } }
##
# @query-dump-guest-memory-capability:
#
# Returns the available formats for dump-guest-memory
#
# Returns: A @DumpGuestMemoryCapability object listing available formats for
# dump-guest-memory
#
# Since: 2.0
##
{ 'command': 'query-dump-guest-memory-capability',
'returns': 'DumpGuestMemoryCapability' }
##
# @dump-skeys
#
# Dump guest's storage keys
#
# @filename: the path to the file to dump to
#
# This command is only supported on s390 architecture.
#
# Since: 2.5
##
{ 'command': 'dump-skeys',
'data': { 'filename': 'str' } }
##
# @netdev_add:
#
# Add a network backend.
#
# @type: the type of network backend. Current valid values are 'user', 'tap',
# 'vde', 'socket', 'dump' and 'bridge'
#
# @id: the name of the new network backend
#
# Additional arguments depend on the type.
#
# TODO This command effectively bypasses QAPI completely due to its
# "additional arguments" business. It shouldn't have been added to
# the schema in this form. It should be qapified properly, or
# replaced by a properly qapified command.
#
# Since: 0.14.0
#
# Returns: Nothing on success
# If @type is not a valid network backend, DeviceNotFound
##
{ 'command': 'netdev_add',
'data': {'type': 'str', 'id': 'str'},
'gen': false } # so we can get the additional arguments
##
# @netdev_del:
#
# Remove a network backend.
#
# @id: the name of the network backend to remove
#
# Returns: Nothing on success
# If @id is not a valid network backend, DeviceNotFound
#
# Since: 0.14.0
##
{ 'command': 'netdev_del', 'data': {'id': 'str'} }
##
# @object-add:
#
# Create a QOM object.
#
# @qom-type: the class name for the object to be created
#
# @id: the name of the new object
#
# @props: #optional a dictionary of properties to be passed to the backend
#
# Returns: Nothing on success
# Error if @qom-type is not a valid class name
#
# Since: 2.0
##
{ 'command': 'object-add',
'data': {'qom-type': 'str', 'id': 'str', '*props': 'any'} }
##
# @object-del:
#
# Remove a QOM object.
#
# @id: the name of the QOM object to remove
#
# Returns: Nothing on success
# Error if @id is not a valid id for a QOM object
#
# Since: 2.0
##
{ 'command': 'object-del', 'data': {'id': 'str'} }
##
# @NetdevNoneOptions
#
# Use it alone to have zero network devices.
#
# Since 1.2
##
{ 'struct': 'NetdevNoneOptions',
'data': { } }
##
# @NetLegacyNicOptions
#
# Create a new Network Interface Card.
#
# @netdev: #optional id of -netdev to connect to
#
# @macaddr: #optional MAC address
#
# @model: #optional device model (e1000, rtl8139, virtio etc.)
#
# @addr: #optional PCI device address
#
# @vectors: #optional number of MSI-x vectors, 0 to disable MSI-X
#
# Since 1.2
##
{ 'struct': 'NetLegacyNicOptions',
'data': {
'*netdev': 'str',
'*macaddr': 'str',
'*model': 'str',
'*addr': 'str',
'*vectors': 'uint32' } }
##
# @String
#
# A fat type wrapping 'str', to be embedded in lists.
#
# Since 1.2
##
{ 'struct': 'String',
'data': {
'str': 'str' } }
##
# @NetdevUserOptions
#
# Use the user mode network stack which requires no administrator privilege to
# run.
#
# @hostname: #optional client hostname reported by the builtin DHCP server
#
# @restrict: #optional isolate the guest from the host
#
# @ipv4: #optional whether to support IPv4, default true for enabled
# (since 2.6)
#
# @ipv6: #optional whether to support IPv6, default true for enabled
# (since 2.6)
#
# @ip: #optional legacy parameter, use net= instead
#
# @net: #optional IP network address that the guest will see, in the
# form addr[/netmask] The netmask is optional, and can be
# either in the form a.b.c.d or as a number of valid top-most
# bits. Default is 10.0.2.0/24.
#
# @host: #optional guest-visible address of the host
#
# @tftp: #optional root directory of the built-in TFTP server
#
# @bootfile: #optional BOOTP filename, for use with tftp=
#
# @dhcpstart: #optional the first of the 16 IPs the built-in DHCP server can
# assign
#
# @dns: #optional guest-visible address of the virtual nameserver
#
# @dnssearch: #optional list of DNS suffixes to search, passed as DHCP option
# to the guest
#
# @ipv6-prefix: #optional IPv6 network prefix (default is fec0::) (since
# 2.6). The network prefix is given in the usual
# hexadecimal IPv6 address notation.
#
# @ipv6-prefixlen: #optional IPv6 network prefix length (default is 64)
# (since 2.6)
#
# @ipv6-host: #optional guest-visible IPv6 address of the host (since 2.6)
#
# @ipv6-dns: #optional guest-visible IPv6 address of the virtual
# nameserver (since 2.6)
#
# @smb: #optional root directory of the built-in SMB server
#
# @smbserver: #optional IP address of the built-in SMB server
#
# @hostfwd: #optional redirect incoming TCP or UDP host connections to guest
# endpoints
#
# @guestfwd: #optional forward guest TCP connections
#
# Since 1.2
##
{ 'struct': 'NetdevUserOptions',
'data': {
'*hostname': 'str',
'*restrict': 'bool',
'*ipv4': 'bool',
'*ipv6': 'bool',
'*ip': 'str',
'*net': 'str',
'*host': 'str',
'*tftp': 'str',
'*bootfile': 'str',
'*dhcpstart': 'str',
'*dns': 'str',
'*dnssearch': ['String'],
'*ipv6-prefix': 'str',
'*ipv6-prefixlen': 'int',
'*ipv6-host': 'str',
'*ipv6-dns': 'str',
'*smb': 'str',
'*smbserver': 'str',
'*hostfwd': ['String'],
'*guestfwd': ['String'] } }
##
# @NetdevTapOptions
#
# Connect the host TAP network interface name to the VLAN.
#
# @ifname: #optional interface name
#
# @fd: #optional file descriptor of an already opened tap
#
# @fds: #optional multiple file descriptors of already opened multiqueue capable
# tap
#
# @script: #optional script to initialize the interface
#
# @downscript: #optional script to shut down the interface
#
# @helper: #optional command to execute to configure bridge
#
# @sndbuf: #optional send buffer limit. Understands [TGMKkb] suffixes.
#
# @vnet_hdr: #optional enable the IFF_VNET_HDR flag on the tap interface
#
# @vhost: #optional enable vhost-net network accelerator
#
# @vhostfd: #optional file descriptor of an already opened vhost net device
#
# @vhostfds: #optional file descriptors of multiple already opened vhost net
# devices
#
# @vhostforce: #optional vhost on for non-MSIX virtio guests
#
# @queues: #optional number of queues to be created for multiqueue capable tap
#
# @poll-us: #optional maximum number of microseconds that could
# be spent on busy polling for tap (since 2.7)
#
# Since 1.2
##
{ 'struct': 'NetdevTapOptions',
'data': {
'*ifname': 'str',
'*fd': 'str',
'*fds': 'str',
'*script': 'str',
'*downscript': 'str',
'*helper': 'str',
'*sndbuf': 'size',
'*vnet_hdr': 'bool',
'*vhost': 'bool',
'*vhostfd': 'str',
'*vhostfds': 'str',
'*vhostforce': 'bool',
'*queues': 'uint32',
'*poll-us': 'uint32'} }
##
# @NetdevSocketOptions
#
# Connect the VLAN to a remote VLAN in another QEMU virtual machine using a TCP
# socket connection.
#
# @fd: #optional file descriptor of an already opened socket
#
# @listen: #optional port number, and optional hostname, to listen on
#
# @connect: #optional port number, and optional hostname, to connect to
#
# @mcast: #optional UDP multicast address and port number
#
# @localaddr: #optional source address and port for multicast and udp packets
#
# @udp: #optional UDP unicast address and port number
#
# Since 1.2
##
{ 'struct': 'NetdevSocketOptions',
'data': {
'*fd': 'str',
'*listen': 'str',
'*connect': 'str',
'*mcast': 'str',
'*localaddr': 'str',
'*udp': 'str' } }
##
# @NetdevL2TPv3Options
#
# Connect the VLAN to Ethernet over L2TPv3 Static tunnel
#
# @src: source address
#
# @dst: destination address
#
# @srcport: #optional source port - mandatory for udp, optional for ip
#
# @dstport: #optional destination port - mandatory for udp, optional for ip
#
# @ipv6: #optional - force the use of ipv6
#
# @udp: #optional - use the udp version of l2tpv3 encapsulation
#
# @cookie64: #optional - use 64 bit coookies
#
# @counter: #optional have sequence counter
#
# @pincounter: #optional pin sequence counter to zero -
# workaround for buggy implementations or
# networks with packet reorder
#
# @txcookie: #optional 32 or 64 bit transmit cookie
#
# @rxcookie: #optional 32 or 64 bit receive cookie
#
# @txsession: 32 bit transmit session
#
# @rxsession: #optional 32 bit receive session - if not specified
# set to the same value as transmit
#
# @offset: #optional additional offset - allows the insertion of
# additional application-specific data before the packet payload
#
# Since 2.1
##
{ 'struct': 'NetdevL2TPv3Options',
'data': {
'src': 'str',
'dst': 'str',
'*srcport': 'str',
'*dstport': 'str',
'*ipv6': 'bool',
'*udp': 'bool',
'*cookie64': 'bool',
'*counter': 'bool',
'*pincounter': 'bool',
'*txcookie': 'uint64',
'*rxcookie': 'uint64',
'txsession': 'uint32',
'*rxsession': 'uint32',
'*offset': 'uint32' } }
##
# @NetdevVdeOptions
#
# Connect the VLAN to a vde switch running on the host.
#
# @sock: #optional socket path
#
# @port: #optional port number
#
# @group: #optional group owner of socket
#
# @mode: #optional permissions for socket
#
# Since 1.2
##
{ 'struct': 'NetdevVdeOptions',
'data': {
'*sock': 'str',
'*port': 'uint16',
'*group': 'str',
'*mode': 'uint16' } }
##
# @NetdevDumpOptions
#
# Dump VLAN network traffic to a file.
#
# @len: #optional per-packet size limit (64k default). Understands [TGMKkb]
# suffixes.
#
# @file: #optional dump file path (default is qemu-vlan0.pcap)
#
# Since 1.2
##
{ 'struct': 'NetdevDumpOptions',
'data': {
'*len': 'size',
'*file': 'str' } }
##
# @NetdevBridgeOptions
#
# Connect a host TAP network interface to a host bridge device.
#
# @br: #optional bridge name
#
# @helper: #optional command to execute to configure bridge
#
# Since 1.2
##
{ 'struct': 'NetdevBridgeOptions',
'data': {
'*br': 'str',
'*helper': 'str' } }
##
# @NetdevHubPortOptions
#
# Connect two or more net clients through a software hub.
#
# @hubid: hub identifier number
#
# Since 1.2
##
{ 'struct': 'NetdevHubPortOptions',
'data': {
'hubid': 'int32' } }
##
# @NetdevNetmapOptions
#
# Connect a client to a netmap-enabled NIC or to a VALE switch port
#
# @ifname: Either the name of an existing network interface supported by
# netmap, or the name of a VALE port (created on the fly).
# A VALE port name is in the form 'valeXXX:YYY', where XXX and
# YYY are non-negative integers. XXX identifies a switch and
# YYY identifies a port of the switch. VALE ports having the
# same XXX are therefore connected to the same switch.
#
# @devname: #optional path of the netmap device (default: '/dev/netmap').
#
# Since 2.0
##
{ 'struct': 'NetdevNetmapOptions',
'data': {
'ifname': 'str',
'*devname': 'str' } }
##
# @NetdevVhostUserOptions
#
# Vhost-user network backend
#
# @chardev: name of a unix socket chardev
#
# @vhostforce: #optional vhost on for non-MSIX virtio guests (default: false).
#
# @queues: #optional number of queues to be created for multiqueue vhost-user
# (default: 1) (Since 2.5)
#
# Since 2.1
##
{ 'struct': 'NetdevVhostUserOptions',
'data': {
'chardev': 'str',
'*vhostforce': 'bool',
'*queues': 'int' } }
##
# @NetClientDriver
#
# Available netdev drivers.
#
# Since 2.7
##
{ 'enum': 'NetClientDriver',
'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde', 'dump',
'bridge', 'hubport', 'netmap', 'vhost-user' ] }
##
# @Netdev
#
# Captures the configuration of a network device.
#
# @id: identifier for monitor commands.
#
# @type: Specify the driver used for interpreting remaining arguments.
#
# Since 1.2
#
# 'l2tpv3' - since 2.1
##
{ 'union': 'Netdev',
'base': { 'id': 'str', 'type': 'NetClientDriver' },
'discriminator': 'type',
'data': {
'none': 'NetdevNoneOptions',
'nic': 'NetLegacyNicOptions',
'user': 'NetdevUserOptions',
'tap': 'NetdevTapOptions',
'l2tpv3': 'NetdevL2TPv3Options',
'socket': 'NetdevSocketOptions',
'vde': 'NetdevVdeOptions',
'dump': 'NetdevDumpOptions',
'bridge': 'NetdevBridgeOptions',
'hubport': 'NetdevHubPortOptions',
'netmap': 'NetdevNetmapOptions',
'vhost-user': 'NetdevVhostUserOptions' } }
##
# @NetLegacy
#
# Captures the configuration of a network device; legacy.
#
# @vlan: #optional vlan number
#
# @id: #optional identifier for monitor commands
#
# @name: #optional identifier for monitor commands, ignored if @id is present
#
# @opts: device type specific properties (legacy)
#
# Since 1.2
##
{ 'struct': 'NetLegacy',
'data': {
'*vlan': 'int32',
'*id': 'str',
'*name': 'str',
'opts': 'NetLegacyOptions' } }
##
# @NetLegacyOptions
#
# Like Netdev, but for use only by the legacy command line options
#
# Since 1.2
##
{ 'union': 'NetLegacyOptions',
'data': {
'none': 'NetdevNoneOptions',
'nic': 'NetLegacyNicOptions',
'user': 'NetdevUserOptions',
'tap': 'NetdevTapOptions',
'l2tpv3': 'NetdevL2TPv3Options',
'socket': 'NetdevSocketOptions',
'vde': 'NetdevVdeOptions',
'dump': 'NetdevDumpOptions',
'bridge': 'NetdevBridgeOptions',
'netmap': 'NetdevNetmapOptions',
'vhost-user': 'NetdevVhostUserOptions' } }
##
# @NetFilterDirection
#
# Indicates whether a netfilter is attached to a netdev's transmit queue or
# receive queue or both.
#
# @all: the filter is attached both to the receive and the transmit
# queue of the netdev (default).
#
# @rx: the filter is attached to the receive queue of the netdev,
# where it will receive packets sent to the netdev.
#
# @tx: the filter is attached to the transmit queue of the netdev,
# where it will receive packets sent by the netdev.
#
# Since 2.5
##
{ 'enum': 'NetFilterDirection',
'data': [ 'all', 'rx', 'tx' ] }
##
# @InetSocketAddress
#
# Captures a socket address or address range in the Internet namespace.
#
# @host: host part of the address
#
# @port: port part of the address, or lowest port if @to is present
#
# @to: highest port to try
#
# @ipv4: whether to accept IPv4 addresses, default try both IPv4 and IPv6
# #optional
#
# @ipv6: whether to accept IPv6 addresses, default try both IPv4 and IPv6
# #optional
#
# Since 1.3
##
{ 'struct': 'InetSocketAddress',
'data': {
'host': 'str',
'port': 'str',
'*to': 'uint16',
'*ipv4': 'bool',
'*ipv6': 'bool' } }
##
# @UnixSocketAddress
#
# Captures a socket address in the local ("Unix socket") namespace.
#
# @path: filesystem path to use
#
# Since 1.3
##
{ 'struct': 'UnixSocketAddress',
'data': {
'path': 'str' } }
##
# @SocketAddress
#
# Captures the address of a socket, which could also be a named file descriptor
#
# Since 1.3
##
{ 'union': 'SocketAddress',
'data': {
'inet': 'InetSocketAddress',
'unix': 'UnixSocketAddress',
'fd': 'String' } }
##
# @getfd:
#
# Receive a file descriptor via SCM rights and assign it a name
#
# @fdname: file descriptor name
#
# Returns: Nothing on success
#
# Since: 0.14.0
#
# Notes: If @fdname already exists, the file descriptor assigned to
# it will be closed and replaced by the received file
# descriptor.
# The 'closefd' command can be used to explicitly close the
# file descriptor when it is no longer needed.
##
{ 'command': 'getfd', 'data': {'fdname': 'str'} }
##
# @closefd:
#
# Close a file descriptor previously passed via SCM rights
#
# @fdname: file descriptor name
#
# Returns: Nothing on success
#
# Since: 0.14.0
##
{ 'command': 'closefd', 'data': {'fdname': 'str'} }
##
# @MachineInfo:
#
# Information describing a machine.
#
# @name: the name of the machine
#
# @alias: #optional an alias for the machine name
#
# @default: #optional whether the machine is default
#
# @cpu-max: maximum number of CPUs supported by the machine type
# (since 1.5.0)
#
# @hotpluggable-cpus: cpu hotplug via -device is supported (since 2.7.0)
#
# Since: 1.2.0
##
{ 'struct': 'MachineInfo',
'data': { 'name': 'str', '*alias': 'str',
'*is-default': 'bool', 'cpu-max': 'int',
'hotpluggable-cpus': 'bool'} }
##
# @query-machines:
#
# Return a list of supported machines
#
# Returns: a list of MachineInfo
#
# Since: 1.2.0
##
{ 'command': 'query-machines', 'returns': ['MachineInfo'] }
##
# @CpuDefinitionInfo:
#
# Virtual CPU definition.
#
# @name: the name of the CPU definition
#
# Since: 1.2.0
##
{ 'struct': 'CpuDefinitionInfo',
'data': { 'name': 'str' } }
##
# @query-cpu-definitions:
#
# Return a list of supported virtual CPU definitions
#
# Returns: a list of CpuDefInfo
#
# Since: 1.2.0
##
{ 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'] }
# @AddfdInfo:
#
# Information about a file descriptor that was added to an fd set.
#
# @fdset-id: The ID of the fd set that @fd was added to.
#
# @fd: The file descriptor that was received via SCM rights and
# added to the fd set.
#
# Since: 1.2.0
##
{ 'struct': 'AddfdInfo', 'data': {'fdset-id': 'int', 'fd': 'int'} }
##
# @add-fd:
#
# Add a file descriptor, that was passed via SCM rights, to an fd set.
#
# @fdset-id: #optional The ID of the fd set to add the file descriptor to.
#
# @opaque: #optional A free-form string that can be used to describe the fd.
#
# Returns: @AddfdInfo on success
# If file descriptor was not received, FdNotSupplied
# If @fdset-id is a negative value, InvalidParameterValue
#
# Notes: The list of fd sets is shared by all monitor connections.
#
# If @fdset-id is not specified, a new fd set will be created.
#
# Since: 1.2.0
##
{ 'command': 'add-fd', 'data': {'*fdset-id': 'int', '*opaque': 'str'},
'returns': 'AddfdInfo' }
##
# @remove-fd:
#
# Remove a file descriptor from an fd set.
#
# @fdset-id: The ID of the fd set that the file descriptor belongs to.
#
# @fd: #optional The file descriptor that is to be removed.
#
# Returns: Nothing on success
# If @fdset-id or @fd is not found, FdNotFound
#
# Since: 1.2.0
#
# Notes: The list of fd sets is shared by all monitor connections.
#
# If @fd is not specified, all file descriptors in @fdset-id
# will be removed.
##
{ 'command': 'remove-fd', 'data': {'fdset-id': 'int', '*fd': 'int'} }
##
# @FdsetFdInfo:
#
# Information about a file descriptor that belongs to an fd set.
#
# @fd: The file descriptor value.
#
# @opaque: #optional A free-form string that can be used to describe the fd.
#
# Since: 1.2.0
##
{ 'struct': 'FdsetFdInfo',
'data': {'fd': 'int', '*opaque': 'str'} }
##
# @FdsetInfo:
#
# Information about an fd set.
#
# @fdset-id: The ID of the fd set.
#
# @fds: A list of file descriptors that belong to this fd set.
#
# Since: 1.2.0
##
{ 'struct': 'FdsetInfo',
'data': {'fdset-id': 'int', 'fds': ['FdsetFdInfo']} }
##
# @query-fdsets:
#
# Return information describing all fd sets.
#
# Returns: A list of @FdsetInfo
#
# Since: 1.2.0
#
# Note: The list of fd sets is shared by all monitor connections.
#
##
{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
##
# @TargetInfo:
#
# Information describing the QEMU target.
#
# @arch: the target architecture (eg "x86_64", "i386", etc)
#
# Since: 1.2.0
##
{ 'struct': 'TargetInfo',
'data': { 'arch': 'str' } }
##
# @query-target:
#
# Return information about the target for this QEMU
#
# Returns: TargetInfo
#
# Since: 1.2.0
##
{ 'command': 'query-target', 'returns': 'TargetInfo' }
##
# @QKeyCode:
#
# An enumeration of key name.
#
# This is used by the send-key command.
#
# Since: 1.3.0
#
# 'unmapped' and 'pause' since 2.0
# 'ro' and 'kp_comma' since 2.4
# 'kp_equals' and 'power' since 2.6
##
{ 'enum': 'QKeyCode',
'data': [ 'unmapped',
'shift', 'shift_r', 'alt', 'alt_r', 'altgr', 'altgr_r', 'ctrl',
'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8',
'9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e',
'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right',
'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon',
'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b',
'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock',
'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10',
'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply',
'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0',
'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8',
'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end',
'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 'ro',
'kp_comma', 'kp_equals', 'power' ] }
##
# @KeyValue
#
# Represents a keyboard key.
#
# Since: 1.3.0
##
{ 'union': 'KeyValue',
'data': {
'number': 'int',
'qcode': 'QKeyCode' } }
##
# @send-key:
#
# Send keys to guest.
#
# @keys: An array of @KeyValue elements. All @KeyValues in this array are
# simultaneously sent to the guest. A @KeyValue.number value is sent
# directly to the guest, while @KeyValue.qcode must be a valid
# @QKeyCode value
#
# @hold-time: #optional time to delay key up events, milliseconds. Defaults
# to 100
#
# Returns: Nothing on success
# If key is unknown or redundant, InvalidParameter
#
# Since: 1.3.0
#
##
{ 'command': 'send-key',
'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } }
##
# @screendump:
#
# Write a PPM of the VGA screen to a file.
#
# @filename: the path of a new PPM file to store the image
#
# Returns: Nothing on success
#
# Since: 0.14.0
##
{ 'command': 'screendump', 'data': {'filename': 'str'} }
##
# @ChardevCommon:
#
# Configuration shared across all chardev backends
#
# @logfile: #optional The name of a logfile to save output
# @logappend: #optional true to append instead of truncate
# (default to false to truncate)
#
# Since: 2.6
##
{ 'struct': 'ChardevCommon', 'data': { '*logfile': 'str',
'*logappend': 'bool' } }
##
# @ChardevFile:
#
# Configuration info for file chardevs.
#
# @in: #optional The name of the input file
# @out: The name of the output file
# @append: #optional Open the file in append mode (default false to
# truncate) (Since 2.6)
#
# Since: 1.4
##
{ 'struct': 'ChardevFile', 'data': { '*in' : 'str',
'out' : 'str',
'*append': 'bool' },
'base': 'ChardevCommon' }
##
# @ChardevHostdev:
#
# Configuration info for device and pipe chardevs.
#
# @device: The name of the special file for the device,
# i.e. /dev/ttyS0 on Unix or COM1: on Windows
# @type: What kind of device this is.
#
# Since: 1.4
##
{ 'struct': 'ChardevHostdev', 'data': { 'device' : 'str' },
'base': 'ChardevCommon' }
##
# @ChardevSocket:
#
# Configuration info for (stream) socket chardevs.
#
# @addr: socket address to listen on (server=true)
# or connect to (server=false)
# @tls-creds: #optional the ID of the TLS credentials object (since 2.6)
# @server: #optional create server socket (default: true)
# @wait: #optional wait for incoming connection on server
# sockets (default: false).
# @nodelay: #optional set TCP_NODELAY socket option (default: false)
# @telnet: #optional enable telnet protocol on server
# sockets (default: false)
# @reconnect: #optional For a client socket, if a socket is disconnected,
# then attempt a reconnect after the given number of seconds.
# Setting this to zero disables this function. (default: 0)
# (Since: 2.2)
#
# Since: 1.4
##
{ 'struct': 'ChardevSocket', 'data': { 'addr' : 'SocketAddress',
'*tls-creds' : 'str',
'*server' : 'bool',
'*wait' : 'bool',
'*nodelay' : 'bool',
'*telnet' : 'bool',
'*reconnect' : 'int' },
'base': 'ChardevCommon' }
##
# @ChardevUdp:
#
# Configuration info for datagram socket chardevs.
#
# @remote: remote address
# @local: #optional local address
#
# Since: 1.5
##
{ 'struct': 'ChardevUdp', 'data': { 'remote' : 'SocketAddress',
'*local' : 'SocketAddress' },
'base': 'ChardevCommon' }
##
# @ChardevMux:
#
# Configuration info for mux chardevs.
#
# @chardev: name of the base chardev.
#
# Since: 1.5
##
{ 'struct': 'ChardevMux', 'data': { 'chardev' : 'str' },
'base': 'ChardevCommon' }
##
# @ChardevStdio:
#
# Configuration info for stdio chardevs.
#
# @signal: #optional Allow signals (such as SIGINT triggered by ^C)
# be delivered to qemu. Default: true in -nographic mode,
# false otherwise.
#
# Since: 1.5
##
{ 'struct': 'ChardevStdio', 'data': { '*signal' : 'bool' },
'base': 'ChardevCommon' }
##
# @ChardevSpiceChannel:
#
# Configuration info for spice vm channel chardevs.
#
# @type: kind of channel (for example vdagent).
#
# Since: 1.5
##
{ 'struct': 'ChardevSpiceChannel', 'data': { 'type' : 'str' },
'base': 'ChardevCommon' }
##
# @ChardevSpicePort:
#
# Configuration info for spice port chardevs.
#
# @fqdn: name of the channel (see docs/spice-port-fqdn.txt)
#
# Since: 1.5
##
{ 'struct': 'ChardevSpicePort', 'data': { 'fqdn' : 'str' },
'base': 'ChardevCommon' }
##
# @ChardevVC:
#
# Configuration info for virtual console chardevs.
#
# @width: console width, in pixels
# @height: console height, in pixels
# @cols: console width, in chars
# @rows: console height, in chars
#
# Since: 1.5
##
{ 'struct': 'ChardevVC', 'data': { '*width' : 'int',
'*height' : 'int',
'*cols' : 'int',
'*rows' : 'int' },
'base': 'ChardevCommon' }
##
# @ChardevRingbuf:
#
# Configuration info for ring buffer chardevs.
#
# @size: #optional ring buffer size, must be power of two, default is 65536
#
# Since: 1.5
##
{ 'struct': 'ChardevRingbuf', 'data': { '*size' : 'int' },
'base': 'ChardevCommon' }
##
# @ChardevBackend:
#
# Configuration info for the new chardev backend.
#
# Since: 1.4 (testdev since 2.2)
##
{ 'union': 'ChardevBackend', 'data': { 'file' : 'ChardevFile',
'serial' : 'ChardevHostdev',
'parallel': 'ChardevHostdev',
'pipe' : 'ChardevHostdev',
'socket' : 'ChardevSocket',
'udp' : 'ChardevUdp',
'pty' : 'ChardevCommon',
'null' : 'ChardevCommon',
'mux' : 'ChardevMux',
'msmouse': 'ChardevCommon',
'braille': 'ChardevCommon',
'testdev': 'ChardevCommon',
'stdio' : 'ChardevStdio',
'console': 'ChardevCommon',
'spicevmc' : 'ChardevSpiceChannel',
'spiceport' : 'ChardevSpicePort',
'vc' : 'ChardevVC',
'ringbuf': 'ChardevRingbuf',
# next one is just for compatibility
'memory' : 'ChardevRingbuf' } }
##
# @ChardevReturn:
#
# Return info about the chardev backend just created.
#
# @pty: #optional name of the slave pseudoterminal device, present if
# and only if a chardev of type 'pty' was created
#
# Since: 1.4
##
{ 'struct' : 'ChardevReturn', 'data': { '*pty' : 'str' } }
##
# @chardev-add:
#
# Add a character device backend
#
# @id: the chardev's ID, must be unique
# @backend: backend type and parameters
#
# Returns: ChardevReturn.
#
# Since: 1.4
##
{ 'command': 'chardev-add', 'data': {'id' : 'str',
'backend' : 'ChardevBackend' },
'returns': 'ChardevReturn' }
##
# @chardev-remove:
#
# Remove a character device backend
#
# @id: the chardev's ID, must exist and not be in use
#
# Returns: Nothing on success
#
# Since: 1.4
##
{ 'command': 'chardev-remove', 'data': {'id': 'str'} }
##
# @TpmModel:
#
# An enumeration of TPM models
#
# @tpm-tis: TPM TIS model
#
# Since: 1.5
##
{ 'enum': 'TpmModel', 'data': [ 'tpm-tis' ] }
##
# @query-tpm-models:
#
# Return a list of supported TPM models
#
# Returns: a list of TpmModel
#
# Since: 1.5
##
{ 'command': 'query-tpm-models', 'returns': ['TpmModel'] }
##
# @TpmType:
#
# An enumeration of TPM types
#
# @passthrough: TPM passthrough type
#
# Since: 1.5
##
{ 'enum': 'TpmType', 'data': [ 'passthrough' ] }
##
# @query-tpm-types:
#
# Return a list of supported TPM types
#
# Returns: a list of TpmType
#
# Since: 1.5
##
{ 'command': 'query-tpm-types', 'returns': ['TpmType'] }
##
# @TPMPassthroughOptions:
#
# Information about the TPM passthrough type
#
# @path: #optional string describing the path used for accessing the TPM device
#
# @cancel-path: #optional string showing the TPM's sysfs cancel file
# for cancellation of TPM commands while they are executing
#
# Since: 1.5
##
{ 'struct': 'TPMPassthroughOptions', 'data': { '*path' : 'str',
'*cancel-path' : 'str'} }
##
# @TpmTypeOptions:
#
# A union referencing different TPM backend types' configuration options
#
# @passthrough: The configuration options for the TPM passthrough type
#
# Since: 1.5
##
{ 'union': 'TpmTypeOptions',
'data': { 'passthrough' : 'TPMPassthroughOptions' } }
##
# @TpmInfo:
#
# Information about the TPM
#
# @id: The Id of the TPM
#
# @model: The TPM frontend model
#
# @options: The TPM (backend) type configuration options
#
# Since: 1.5
##
{ 'struct': 'TPMInfo',
'data': {'id': 'str',
'model': 'TpmModel',
'options': 'TpmTypeOptions' } }
##
# @query-tpm:
#
# Return information about the TPM device
#
# Returns: @TPMInfo on success
#
# Since: 1.5
##
{ 'command': 'query-tpm', 'returns': ['TPMInfo'] }
##
# @AcpiTableOptions
#
# Specify an ACPI table on the command line to load.
#
# At most one of @file and @data can be specified. The list of files specified
# by any one of them is loaded and concatenated in order. If both are omitted,
# @data is implied.
#
# Other fields / optargs can be used to override fields of the generic ACPI
# table header; refer to the ACPI specification 5.0, section 5.2.6 System
# Description Table Header. If a header field is not overridden, then the
# corresponding value from the concatenated blob is used (in case of @file), or
# it is filled in with a hard-coded value (in case of @data).
#
# String fields are copied into the matching ACPI member from lowest address
# upwards, and silently truncated / NUL-padded to length.
#
# @sig: #optional table signature / identifier (4 bytes)
#
# @rev: #optional table revision number (dependent on signature, 1 byte)
#
# @oem_id: #optional OEM identifier (6 bytes)
#
# @oem_table_id: #optional OEM table identifier (8 bytes)
#
# @oem_rev: #optional OEM-supplied revision number (4 bytes)
#
# @asl_compiler_id: #optional identifier of the utility that created the table
# (4 bytes)
#
# @asl_compiler_rev: #optional revision number of the utility that created the
# table (4 bytes)
#
# @file: #optional colon (:) separated list of pathnames to load and
# concatenate as table data. The resultant binary blob is expected to
# have an ACPI table header. At least one file is required. This field
# excludes @data.
#
# @data: #optional colon (:) separated list of pathnames to load and
# concatenate as table data. The resultant binary blob must not have an
# ACPI table header. At least one file is required. This field excludes
# @file.
#
# Since 1.5
##
{ 'struct': 'AcpiTableOptions',
'data': {
'*sig': 'str',
'*rev': 'uint8',
'*oem_id': 'str',
'*oem_table_id': 'str',
'*oem_rev': 'uint32',
'*asl_compiler_id': 'str',
'*asl_compiler_rev': 'uint32',
'*file': 'str',
'*data': 'str' }}
##
# @CommandLineParameterType:
#
# Possible types for an option parameter.
#
# @string: accepts a character string
#
# @boolean: accepts "on" or "off"
#
# @number: accepts a number
#
# @size: accepts a number followed by an optional suffix (K)ilo,
# (M)ega, (G)iga, (T)era
#
# Since 1.5
##
{ 'enum': 'CommandLineParameterType',
'data': ['string', 'boolean', 'number', 'size'] }
##
# @CommandLineParameterInfo:
#
# Details about a single parameter of a command line option.
#
# @name: parameter name
#
# @type: parameter @CommandLineParameterType
#
# @help: #optional human readable text string, not suitable for parsing.
#
# @default: #optional default value string (since 2.1)
#
# Since 1.5
##
{ 'struct': 'CommandLineParameterInfo',
'data': { 'name': 'str',
'type': 'CommandLineParameterType',
'*help': 'str',
'*default': 'str' } }
##
# @CommandLineOptionInfo:
#
# Details about a command line option, including its list of parameter details
#
# @option: option name
#
# @parameters: an array of @CommandLineParameterInfo
#
# Since 1.5
##
{ 'struct': 'CommandLineOptionInfo',
'data': { 'option': 'str', 'parameters': ['CommandLineParameterInfo'] } }
##
# @query-command-line-options:
#
# Query command line option schema.
#
# @option: #optional option name
#
# Returns: list of @CommandLineOptionInfo for all options (or for the given
# @option). Returns an error if the given @option doesn't exist.
#
# Since 1.5
##
{'command': 'query-command-line-options', 'data': { '*option': 'str' },
'returns': ['CommandLineOptionInfo'] }
##
# @X86CPURegister32
#
# A X86 32-bit register
#
# Since: 1.5
##
{ 'enum': 'X86CPURegister32',
'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] }
##
# @X86CPUFeatureWordInfo
#
# Information about a X86 CPU feature word
#
# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word
#
# @cpuid-input-ecx: #optional Input ECX value for CPUID instruction for that
# feature word
#
# @cpuid-register: Output register containing the feature bits
#
# @features: value of output register, containing the feature bits
#
# Since: 1.5
##
{ 'struct': 'X86CPUFeatureWordInfo',
'data': { 'cpuid-input-eax': 'int',
'*cpuid-input-ecx': 'int',
'cpuid-register': 'X86CPURegister32',
'features': 'int' } }
##
# @DummyForceArrays
#
# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally
#
# Since 2.5
##
{ 'struct': 'DummyForceArrays',
'data': { 'unused': ['X86CPUFeatureWordInfo'] } }
##
# @RxState:
#
# Packets receiving state
#
# @normal: filter assigned packets according to the mac-table
#
# @none: don't receive any assigned packet
#
# @all: receive all assigned packets
#
# Since: 1.6
##
{ 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] }
##
# @RxFilterInfo:
#
# Rx-filter information for a NIC.
#
# @name: net client name
#
# @promiscuous: whether promiscuous mode is enabled
#
# @multicast: multicast receive state
#
# @unicast: unicast receive state
#
# @vlan: vlan receive state (Since 2.0)
#
# @broadcast-allowed: whether to receive broadcast
#
# @multicast-overflow: multicast table is overflowed or not
#
# @unicast-overflow: unicast table is overflowed or not
#
# @main-mac: the main macaddr string
#
# @vlan-table: a list of active vlan id
#
# @unicast-table: a list of unicast macaddr string
#
# @multicast-table: a list of multicast macaddr string
#
# Since 1.6
##
{ 'struct': 'RxFilterInfo',
'data': {
'name': 'str',
'promiscuous': 'bool',
'multicast': 'RxState',
'unicast': 'RxState',
'vlan': 'RxState',
'broadcast-allowed': 'bool',
'multicast-overflow': 'bool',
'unicast-overflow': 'bool',
'main-mac': 'str',
'vlan-table': ['int'],
'unicast-table': ['str'],
'multicast-table': ['str'] }}
##
# @query-rx-filter:
#
# Return rx-filter information for all NICs (or for the given NIC).
#
# @name: #optional net client name
#
# Returns: list of @RxFilterInfo for all NICs (or for the given NIC).
# Returns an error if the given @name doesn't exist, or given
# NIC doesn't support rx-filter querying, or given net client
# isn't a NIC.
#
# Since: 1.6
##
{ 'command': 'query-rx-filter', 'data': { '*name': 'str' },
'returns': ['RxFilterInfo'] }
##
# @InputButton
#
# Button of a pointer input device (mouse, tablet).
#
# Since: 2.0
##
{ 'enum' : 'InputButton',
'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down' ] }
##
# @InputAxis
#
# Position axis of a pointer input device (mouse, tablet).
#
# Since: 2.0
##
{ 'enum' : 'InputAxis',
'data' : [ 'x', 'y' ] }
##
# @InputKeyEvent
#
# Keyboard input event.
#
# @key: Which key this event is for.
# @down: True for key-down and false for key-up events.
#
# Since: 2.0
##
{ 'struct' : 'InputKeyEvent',
'data' : { 'key' : 'KeyValue',
'down' : 'bool' } }
##
# @InputBtnEvent
#
# Pointer button input event.
#
# @button: Which button this event is for.
# @down: True for key-down and false for key-up events.
#
# Since: 2.0
##
{ 'struct' : 'InputBtnEvent',
'data' : { 'button' : 'InputButton',
'down' : 'bool' } }
##
# @InputMoveEvent
#
# Pointer motion input event.
#
# @axis: Which axis is referenced by @value.
# @value: Pointer position. For absolute coordinates the
# valid range is 0 -> 0x7ffff
#
# Since: 2.0
##
{ 'struct' : 'InputMoveEvent',
'data' : { 'axis' : 'InputAxis',
'value' : 'int' } }
##
# @InputEvent
#
# Input event union.
#
# @key: Input event of Keyboard
# @btn: Input event of pointer buttons
# @rel: Input event of relative pointer motion
# @abs: Input event of absolute pointer motion
#
# Since: 2.0
##
{ 'union' : 'InputEvent',
'data' : { 'key' : 'InputKeyEvent',
'btn' : 'InputBtnEvent',
'rel' : 'InputMoveEvent',
'abs' : 'InputMoveEvent' } }
##
# @input-send-event
#
# Send input event(s) to guest.
#
# @device: #optional display device to send event(s) to.
# @head: #optional head to send event(s) to, in case the
# display device supports multiple scanouts.
# @events: List of InputEvent union.
#
# Returns: Nothing on success.
#
# The @display and @head parameters can be used to send the input
# event to specific input devices in case (a) multiple input devices
# of the same kind are added to the virtual machine and (b) you have
# configured input routing (see docs/multiseat.txt) for those input
# devices. The parameters work exactly like the device and head
# properties of input devices. If @device is missing, only devices
# that have no input routing config are admissible. If @device is
# specified, both input devices with and without input routing config
# are admissible, but devices with input routing config take
# precedence.
#
# Since: 2.6
##
{ 'command': 'input-send-event',
'data': { '*device': 'str',
'*head' : 'int',
'events' : [ 'InputEvent' ] } }
##
# @NumaOptions
#
# A discriminated record of NUMA options. (for OptsVisitor)
#
# Since 2.1
##
{ 'union': 'NumaOptions',
'data': {
'node': 'NumaNodeOptions' }}
##
# @NumaNodeOptions
#
# Create a guest NUMA node. (for OptsVisitor)
#
# @nodeid: #optional NUMA node ID (increase by 1 from 0 if omitted)
#
# @cpus: #optional VCPUs belonging to this node (assign VCPUS round-robin
# if omitted)
#
# @mem: #optional memory size of this node; mutually exclusive with @memdev.
# Equally divide total memory among nodes if both @mem and @memdev are
# omitted.
#
# @memdev: #optional memory backend object. If specified for one node,
# it must be specified for all nodes.
#
# Since: 2.1
##
{ 'struct': 'NumaNodeOptions',
'data': {
'*nodeid': 'uint16',
'*cpus': ['uint16'],
'*mem': 'size',
'*memdev': 'str' }}
##
# @HostMemPolicy
#
# Host memory policy types
#
# @default: restore default policy, remove any nondefault policy
#
# @preferred: set the preferred host nodes for allocation
#
# @bind: a strict policy that restricts memory allocation to the
# host nodes specified
#
# @interleave: memory allocations are interleaved across the set
# of host nodes specified
#
# Since 2.1
##
{ 'enum': 'HostMemPolicy',
'data': [ 'default', 'preferred', 'bind', 'interleave' ] }
##
# @Memdev:
#
# Information about memory backend
#
# @size: memory backend size
#
# @merge: enables or disables memory merge support
#
# @dump: includes memory backend's memory in a core dump or not
#
# @prealloc: enables or disables memory preallocation
#
# @host-nodes: host nodes for its memory policy
#
# @policy: memory policy of memory backend
#
# Since: 2.1
##
{ 'struct': 'Memdev',
'data': {
'size': 'size',
'merge': 'bool',
'dump': 'bool',
'prealloc': 'bool',
'host-nodes': ['uint16'],
'policy': 'HostMemPolicy' }}
##
# @query-memdev:
#
# Returns information for all memory backends.
#
# Returns: a list of @Memdev.
#
# Since: 2.1
##
{ 'command': 'query-memdev', 'returns': ['Memdev'] }
##
# @PCDIMMDeviceInfo:
#
# PCDIMMDevice state information
#
# @id: #optional device's ID
#
# @addr: physical address, where device is mapped
#
# @size: size of memory that the device provides
#
# @slot: slot number at which device is plugged in
#
# @node: NUMA node number where device is plugged in
#
# @memdev: memory backend linked with device
#
# @hotplugged: true if device was hotplugged
#
# @hotpluggable: true if device if could be added/removed while machine is running
#
# Since: 2.1
##
{ 'struct': 'PCDIMMDeviceInfo',
'data': { '*id': 'str',
'addr': 'int',
'size': 'int',
'slot': 'int',
'node': 'int',
'memdev': 'str',
'hotplugged': 'bool',
'hotpluggable': 'bool'
}
}
##
# @MemoryDeviceInfo:
#
# Union containing information about a memory device
#
# Since: 2.1
##
{ 'union': 'MemoryDeviceInfo', 'data': {'dimm': 'PCDIMMDeviceInfo'} }
##
# @query-memory-devices
#
# Lists available memory devices and their state
#
# Since: 2.1
##
{ 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
## @ACPISlotType
#
# @DIMM: memory slot
# @CPU: logical CPU slot (since 2.7)
#
{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] }
## @ACPIOSTInfo
#
# OSPM Status Indication for a device
# For description of possible values of @source and @status fields
# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec.
#
# @device: #optional device ID associated with slot
#
# @slot: slot ID, unique per slot of a given @slot-type
#
# @slot-type: type of the slot
#
# @source: an integer containing the source event
#
# @status: an integer containing the status code
#
# Since: 2.1
##
{ 'struct': 'ACPIOSTInfo',
'data' : { '*device': 'str',
'slot': 'str',
'slot-type': 'ACPISlotType',
'source': 'int',
'status': 'int' } }
##
# @query-acpi-ospm-status
#
# Lists ACPI OSPM status of ACPI device objects,
# which might be reported via _OST method
#
# Since: 2.1
##
{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] }
##
# @WatchdogExpirationAction
#
# An enumeration of the actions taken when the watchdog device's timer is
# expired
#
# @reset: system resets
#
# @shutdown: system shutdown, note that it is similar to @powerdown, which
# tries to set to system status and notify guest
#
# @poweroff: system poweroff, the emulator program exits
#
# @pause: system pauses, similar to @stop
#
# @debug: system enters debug state
#
# @none: nothing is done
#
# @inject-nmi: a non-maskable interrupt is injected into the first VCPU (all
# VCPUS on x86) (since 2.4)
#
# Since: 2.1
##
{ 'enum': 'WatchdogExpirationAction',
'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none',
'inject-nmi' ] }
##
# @IoOperationType
#
# An enumeration of the I/O operation types
#
# @read: read operation
#
# @write: write operation
#
# Since: 2.1
##
{ 'enum': 'IoOperationType',
'data': [ 'read', 'write' ] }
##
# @GuestPanicAction
#
# An enumeration of the actions taken when guest OS panic is detected
#
# @pause: system pauses
#
# Since: 2.1
##
{ 'enum': 'GuestPanicAction',
'data': [ 'pause' ] }
##
# @rtc-reset-reinjection
#
# This command will reset the RTC interrupt reinjection backlog.
# Can be used if another mechanism to synchronize guest time
# is in effect, for example QEMU guest agent's guest-set-time
# command.
#
# Since: 2.1
##
{ 'command': 'rtc-reset-reinjection' }
# Rocker ethernet network switch
{ 'include': 'qapi/rocker.json' }
##
# ReplayMode:
#
# Mode of the replay subsystem.
#
# @none: normal execution mode. Replay or record are not enabled.
#
# @record: record mode. All non-deterministic data is written into the
# replay log.
#
# @play: replay mode. Non-deterministic data required for system execution
# is read from the log.
#
# Since: 2.5
##
{ 'enum': 'ReplayMode',
'data': [ 'none', 'record', 'play' ] }
##
# @xen-load-devices-state:
#
# Load the state of all devices from file. The RAM and the block devices
# of the VM are not loaded by this command.
#
# @filename: the file to load the state of the devices from as binary
# data. See xen-save-devices-state.txt for a description of the binary
# format.
#
# Since: 2.7
##
{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
##
# @GICCapability:
#
# The struct describes capability for a specific GIC (Generic
# Interrupt Controller) version. These bits are not only decided by
# QEMU/KVM software version, but also decided by the hardware that
# the program is running upon.
#
# @version: version of GIC to be described. Currently, only 2 and 3
# are supported.
#
# @emulated: whether current QEMU/hardware supports emulated GIC
# device in user space.
#
# @kernel: whether current QEMU/hardware supports hardware
# accelerated GIC device in kernel.
#
# Since: 2.6
##
{ 'struct': 'GICCapability',
'data': { 'version': 'int',
'emulated': 'bool',
'kernel': 'bool' } }
##
# @query-gic-capabilities:
#
# This command is ARM-only. It will return a list of GICCapability
# objects that describe its capability bits.
#
# Returns: a list of GICCapability objects.
#
# Since: 2.6
##
{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] }
##
# CpuInstanceProperties
#
# List of properties to be used for hotplugging a CPU instance,
# it should be passed by management with device_add command when
# a CPU is being hotplugged.
#
# Note: currently there are 4 properties that could be present
# but management should be prepared to pass through other
# properties with device_add command to allow for future
# interface extension. This also requires the filed names to be kept in
# sync with the properties passed to -device/device_add.
#
# @node-id: #optional NUMA node ID the CPU belongs to
# @socket-id: #optional socket number within node/board the CPU belongs to
# @core-id: #optional core number within socket the CPU belongs to
# @thread-id: #optional thread number within core the CPU belongs to
#
# Since: 2.7
##
{ 'struct': 'CpuInstanceProperties',
'data': { '*node-id': 'int',
'*socket-id': 'int',
'*core-id': 'int',
'*thread-id': 'int'
}
}
##
# @HotpluggableCPU
#
# @type: CPU object type for usage with device_add command
# @props: list of properties to be used for hotplugging CPU
# @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides
# @qom-path: #optional link to existing CPU object if CPU is present or
# omitted if CPU is not present.
#
# Since: 2.7
##
{ 'struct': 'HotpluggableCPU',
'data': { 'type': 'str',
'vcpus-count': 'int',
'props': 'CpuInstanceProperties',
'*qom-path': 'str'
}
}
##
# @query-hotpluggable-cpus
#
# Returns: a list of HotpluggableCPU objects.
#
# Since: 2.7
##
{ 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'] }