| /* |
| * Maxim MAX1110/1111 ADC chip emulation. |
| * |
| * Copyright (c) 2006 Openedhand Ltd. |
| * Written by Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This code is licensed under the GNU GPLv2. |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/adc/max111x.h" |
| #include "hw/irq.h" |
| #include "migration/vmstate.h" |
| #include "qemu/module.h" |
| #include "hw/qdev-properties.h" |
| |
| /* Control-byte bitfields */ |
| #define CB_PD0 (1 << 0) |
| #define CB_PD1 (1 << 1) |
| #define CB_SGL (1 << 2) |
| #define CB_UNI (1 << 3) |
| #define CB_SEL0 (1 << 4) |
| #define CB_SEL1 (1 << 5) |
| #define CB_SEL2 (1 << 6) |
| #define CB_START (1 << 7) |
| |
| #define CHANNEL_NUM(v, b0, b1, b2) \ |
| ((((v) >> (2 + (b0))) & 4) | \ |
| (((v) >> (3 + (b1))) & 2) | \ |
| (((v) >> (4 + (b2))) & 1)) |
| |
| static uint32_t max111x_read(MAX111xState *s) |
| { |
| if (!s->tb1) |
| return 0; |
| |
| switch (s->cycle ++) { |
| case 1: |
| return s->rb2; |
| case 2: |
| return s->rb3; |
| } |
| |
| return 0; |
| } |
| |
| /* Interpret a control-byte */ |
| static void max111x_write(MAX111xState *s, uint32_t value) |
| { |
| int measure, chan; |
| |
| /* Ignore the value if START bit is zero */ |
| if (!(value & CB_START)) |
| return; |
| |
| s->cycle = 0; |
| |
| if (!(value & CB_PD1)) { |
| s->tb1 = 0; |
| return; |
| } |
| |
| s->tb1 = value; |
| |
| if (s->inputs == 8) |
| chan = CHANNEL_NUM(value, 1, 0, 2); |
| else |
| chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2); |
| |
| if (value & CB_SGL) |
| measure = s->input[chan] - s->com; |
| else |
| measure = s->input[chan] - s->input[chan ^ 1]; |
| |
| if (!(value & CB_UNI)) |
| measure ^= 0x80; |
| |
| s->rb2 = (measure >> 2) & 0x3f; |
| s->rb3 = (measure << 6) & 0xc0; |
| |
| /* FIXME: When should the IRQ be lowered? */ |
| qemu_irq_raise(s->interrupt); |
| } |
| |
| static uint32_t max111x_transfer(SSIPeripheral *dev, uint32_t value) |
| { |
| MAX111xState *s = MAX_111X(dev); |
| max111x_write(s, value); |
| return max111x_read(s); |
| } |
| |
| static const VMStateDescription vmstate_max111x = { |
| .name = "max111x", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_SSI_PERIPHERAL(parent_obj, MAX111xState), |
| VMSTATE_UINT8(tb1, MAX111xState), |
| VMSTATE_UINT8(rb2, MAX111xState), |
| VMSTATE_UINT8(rb3, MAX111xState), |
| VMSTATE_INT32_EQUAL(inputs, MAX111xState, NULL), |
| VMSTATE_INT32(com, MAX111xState), |
| VMSTATE_ARRAY_INT32_UNSAFE(input, MAX111xState, inputs, |
| vmstate_info_uint8, uint8_t), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void max111x_input_set(void *opaque, int line, int value) |
| { |
| MAX111xState *s = MAX_111X(opaque); |
| |
| assert(line >= 0 && line < s->inputs); |
| s->input[line] = value; |
| } |
| |
| static int max111x_init(SSIPeripheral *d, int inputs) |
| { |
| DeviceState *dev = DEVICE(d); |
| MAX111xState *s = MAX_111X(dev); |
| |
| qdev_init_gpio_out(dev, &s->interrupt, 1); |
| qdev_init_gpio_in(dev, max111x_input_set, inputs); |
| |
| s->inputs = inputs; |
| |
| return 0; |
| } |
| |
| static void max1110_realize(SSIPeripheral *dev, Error **errp) |
| { |
| max111x_init(dev, 8); |
| } |
| |
| static void max1111_realize(SSIPeripheral *dev, Error **errp) |
| { |
| max111x_init(dev, 4); |
| } |
| |
| static void max111x_reset(DeviceState *dev) |
| { |
| MAX111xState *s = MAX_111X(dev); |
| int i; |
| |
| for (i = 0; i < s->inputs; i++) { |
| s->input[i] = s->reset_input[i]; |
| } |
| s->com = 0; |
| s->tb1 = 0; |
| s->rb2 = 0; |
| s->rb3 = 0; |
| s->cycle = 0; |
| } |
| |
| static Property max1110_properties[] = { |
| /* Reset values for ADC inputs */ |
| DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), |
| DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), |
| DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), |
| DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static Property max1111_properties[] = { |
| /* Reset values for ADC inputs */ |
| DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), |
| DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), |
| DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), |
| DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), |
| DEFINE_PROP_UINT8("input4", MAX111xState, reset_input[4], 0xb0), |
| DEFINE_PROP_UINT8("input5", MAX111xState, reset_input[5], 0xa0), |
| DEFINE_PROP_UINT8("input6", MAX111xState, reset_input[6], 0x90), |
| DEFINE_PROP_UINT8("input7", MAX111xState, reset_input[7], 0x80), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void max111x_class_init(ObjectClass *klass, void *data) |
| { |
| SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| k->transfer = max111x_transfer; |
| device_class_set_legacy_reset(dc, max111x_reset); |
| dc->vmsd = &vmstate_max111x; |
| set_bit(DEVICE_CATEGORY_MISC, dc->categories); |
| } |
| |
| static const TypeInfo max111x_info = { |
| .name = TYPE_MAX_111X, |
| .parent = TYPE_SSI_PERIPHERAL, |
| .instance_size = sizeof(MAX111xState), |
| .class_init = max111x_class_init, |
| .abstract = true, |
| }; |
| |
| static void max1110_class_init(ObjectClass *klass, void *data) |
| { |
| SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| k->realize = max1110_realize; |
| device_class_set_props(dc, max1110_properties); |
| } |
| |
| static const TypeInfo max1110_info = { |
| .name = TYPE_MAX_1110, |
| .parent = TYPE_MAX_111X, |
| .class_init = max1110_class_init, |
| }; |
| |
| static void max1111_class_init(ObjectClass *klass, void *data) |
| { |
| SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| k->realize = max1111_realize; |
| device_class_set_props(dc, max1111_properties); |
| } |
| |
| static const TypeInfo max1111_info = { |
| .name = TYPE_MAX_1111, |
| .parent = TYPE_MAX_111X, |
| .class_init = max1111_class_init, |
| }; |
| |
| static void max111x_register_types(void) |
| { |
| type_register_static(&max111x_info); |
| type_register_static(&max1110_info); |
| type_register_static(&max1111_info); |
| } |
| |
| type_init(max111x_register_types) |