| /* |
| * USB UHCI controller emulation |
| * |
| * Copyright (c) 2005 Fabrice Bellard |
| * |
| * Copyright (c) 2008 Max Krasnyansky |
| * Magor rewrite of the UHCI data structures parser and frame processor |
| * Support for fully async operation and multiple outstanding transactions |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "hw.h" |
| #include "usb.h" |
| #include "pci.h" |
| #include "qemu-timer.h" |
| #include "usb-uhci.h" |
| #include "iov.h" |
| #include "dma.h" |
| |
| //#define DEBUG |
| //#define DEBUG_DUMP_DATA |
| |
| #define UHCI_CMD_FGR (1 << 4) |
| #define UHCI_CMD_EGSM (1 << 3) |
| #define UHCI_CMD_GRESET (1 << 2) |
| #define UHCI_CMD_HCRESET (1 << 1) |
| #define UHCI_CMD_RS (1 << 0) |
| |
| #define UHCI_STS_HCHALTED (1 << 5) |
| #define UHCI_STS_HCPERR (1 << 4) |
| #define UHCI_STS_HSERR (1 << 3) |
| #define UHCI_STS_RD (1 << 2) |
| #define UHCI_STS_USBERR (1 << 1) |
| #define UHCI_STS_USBINT (1 << 0) |
| |
| #define TD_CTRL_SPD (1 << 29) |
| #define TD_CTRL_ERROR_SHIFT 27 |
| #define TD_CTRL_IOS (1 << 25) |
| #define TD_CTRL_IOC (1 << 24) |
| #define TD_CTRL_ACTIVE (1 << 23) |
| #define TD_CTRL_STALL (1 << 22) |
| #define TD_CTRL_BABBLE (1 << 20) |
| #define TD_CTRL_NAK (1 << 19) |
| #define TD_CTRL_TIMEOUT (1 << 18) |
| |
| #define UHCI_PORT_SUSPEND (1 << 12) |
| #define UHCI_PORT_RESET (1 << 9) |
| #define UHCI_PORT_LSDA (1 << 8) |
| #define UHCI_PORT_RD (1 << 6) |
| #define UHCI_PORT_ENC (1 << 3) |
| #define UHCI_PORT_EN (1 << 2) |
| #define UHCI_PORT_CSC (1 << 1) |
| #define UHCI_PORT_CCS (1 << 0) |
| |
| #define UHCI_PORT_READ_ONLY (0x1bb) |
| #define UHCI_PORT_WRITE_CLEAR (UHCI_PORT_CSC | UHCI_PORT_ENC) |
| |
| #define FRAME_TIMER_FREQ 1000 |
| |
| #define FRAME_MAX_LOOPS 256 |
| |
| #define NB_PORTS 2 |
| |
| #ifdef DEBUG |
| #define DPRINTF printf |
| |
| static const char *pid2str(int pid) |
| { |
| switch (pid) { |
| case USB_TOKEN_SETUP: return "SETUP"; |
| case USB_TOKEN_IN: return "IN"; |
| case USB_TOKEN_OUT: return "OUT"; |
| } |
| return "?"; |
| } |
| |
| #else |
| #define DPRINTF(...) |
| #endif |
| |
| typedef struct UHCIState UHCIState; |
| |
| /* |
| * Pending async transaction. |
| * 'packet' must be the first field because completion |
| * handler does "(UHCIAsync *) pkt" cast. |
| */ |
| typedef struct UHCIAsync { |
| USBPacket packet; |
| QEMUSGList sgl; |
| UHCIState *uhci; |
| QTAILQ_ENTRY(UHCIAsync) next; |
| uint32_t td; |
| uint32_t token; |
| int8_t valid; |
| uint8_t isoc; |
| uint8_t done; |
| } UHCIAsync; |
| |
| typedef struct UHCIPort { |
| USBPort port; |
| uint16_t ctrl; |
| } UHCIPort; |
| |
| struct UHCIState { |
| PCIDevice dev; |
| MemoryRegion io_bar; |
| USBBus bus; /* Note unused when we're a companion controller */ |
| uint16_t cmd; /* cmd register */ |
| uint16_t status; |
| uint16_t intr; /* interrupt enable register */ |
| uint16_t frnum; /* frame number */ |
| uint32_t fl_base_addr; /* frame list base address */ |
| uint8_t sof_timing; |
| uint8_t status2; /* bit 0 and 1 are used to generate UHCI_STS_USBINT */ |
| int64_t expire_time; |
| QEMUTimer *frame_timer; |
| UHCIPort ports[NB_PORTS]; |
| |
| /* Interrupts that should be raised at the end of the current frame. */ |
| uint32_t pending_int_mask; |
| |
| /* Active packets */ |
| QTAILQ_HEAD(,UHCIAsync) async_pending; |
| uint8_t num_ports_vmstate; |
| |
| /* Properties */ |
| char *masterbus; |
| uint32_t firstport; |
| }; |
| |
| typedef struct UHCI_TD { |
| uint32_t link; |
| uint32_t ctrl; /* see TD_CTRL_xxx */ |
| uint32_t token; |
| uint32_t buffer; |
| } UHCI_TD; |
| |
| typedef struct UHCI_QH { |
| uint32_t link; |
| uint32_t el_link; |
| } UHCI_QH; |
| |
| static UHCIAsync *uhci_async_alloc(UHCIState *s) |
| { |
| UHCIAsync *async = g_malloc(sizeof(UHCIAsync)); |
| |
| memset(&async->packet, 0, sizeof(async->packet)); |
| async->uhci = s; |
| async->valid = 0; |
| async->td = 0; |
| async->token = 0; |
| async->done = 0; |
| async->isoc = 0; |
| usb_packet_init(&async->packet); |
| pci_dma_sglist_init(&async->sgl, &s->dev, 1); |
| |
| return async; |
| } |
| |
| static void uhci_async_free(UHCIState *s, UHCIAsync *async) |
| { |
| usb_packet_cleanup(&async->packet); |
| qemu_sglist_destroy(&async->sgl); |
| g_free(async); |
| } |
| |
| static void uhci_async_link(UHCIState *s, UHCIAsync *async) |
| { |
| QTAILQ_INSERT_HEAD(&s->async_pending, async, next); |
| } |
| |
| static void uhci_async_unlink(UHCIState *s, UHCIAsync *async) |
| { |
| QTAILQ_REMOVE(&s->async_pending, async, next); |
| } |
| |
| static void uhci_async_cancel(UHCIState *s, UHCIAsync *async) |
| { |
| DPRINTF("uhci: cancel td 0x%x token 0x%x done %u\n", |
| async->td, async->token, async->done); |
| |
| if (!async->done) |
| usb_cancel_packet(&async->packet); |
| uhci_async_free(s, async); |
| } |
| |
| /* |
| * Mark all outstanding async packets as invalid. |
| * This is used for canceling them when TDs are removed by the HCD. |
| */ |
| static UHCIAsync *uhci_async_validate_begin(UHCIState *s) |
| { |
| UHCIAsync *async; |
| |
| QTAILQ_FOREACH(async, &s->async_pending, next) { |
| async->valid--; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Cancel async packets that are no longer valid |
| */ |
| static void uhci_async_validate_end(UHCIState *s) |
| { |
| UHCIAsync *curr, *n; |
| |
| QTAILQ_FOREACH_SAFE(curr, &s->async_pending, next, n) { |
| if (curr->valid > 0) { |
| continue; |
| } |
| uhci_async_unlink(s, curr); |
| uhci_async_cancel(s, curr); |
| } |
| } |
| |
| static void uhci_async_cancel_device(UHCIState *s, USBDevice *dev) |
| { |
| UHCIAsync *curr, *n; |
| |
| QTAILQ_FOREACH_SAFE(curr, &s->async_pending, next, n) { |
| if (!usb_packet_is_inflight(&curr->packet) || |
| curr->packet.ep->dev != dev) { |
| continue; |
| } |
| uhci_async_unlink(s, curr); |
| uhci_async_cancel(s, curr); |
| } |
| } |
| |
| static void uhci_async_cancel_all(UHCIState *s) |
| { |
| UHCIAsync *curr, *n; |
| |
| QTAILQ_FOREACH_SAFE(curr, &s->async_pending, next, n) { |
| uhci_async_unlink(s, curr); |
| uhci_async_cancel(s, curr); |
| } |
| } |
| |
| static UHCIAsync *uhci_async_find_td(UHCIState *s, uint32_t addr, uint32_t token) |
| { |
| UHCIAsync *async; |
| UHCIAsync *match = NULL; |
| int count = 0; |
| |
| /* |
| * We're looking for the best match here. ie both td addr and token. |
| * Otherwise we return last good match. ie just token. |
| * It's ok to match just token because it identifies the transaction |
| * rather well, token includes: device addr, endpoint, size, etc. |
| * |
| * Also since we queue async transactions in reverse order by returning |
| * last good match we restores the order. |
| * |
| * It's expected that we wont have a ton of outstanding transactions. |
| * If we ever do we'd want to optimize this algorithm. |
| */ |
| |
| QTAILQ_FOREACH(async, &s->async_pending, next) { |
| if (async->token == token) { |
| /* Good match */ |
| match = async; |
| |
| if (async->td == addr) { |
| /* Best match */ |
| break; |
| } |
| } |
| count++; |
| } |
| |
| if (count > 64) |
| fprintf(stderr, "uhci: warning lots of async transactions\n"); |
| |
| return match; |
| } |
| |
| static void uhci_update_irq(UHCIState *s) |
| { |
| int level; |
| if (((s->status2 & 1) && (s->intr & (1 << 2))) || |
| ((s->status2 & 2) && (s->intr & (1 << 3))) || |
| ((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) || |
| ((s->status & UHCI_STS_RD) && (s->intr & (1 << 1))) || |
| (s->status & UHCI_STS_HSERR) || |
| (s->status & UHCI_STS_HCPERR)) { |
| level = 1; |
| } else { |
| level = 0; |
| } |
| qemu_set_irq(s->dev.irq[3], level); |
| } |
| |
| static void uhci_reset(void *opaque) |
| { |
| UHCIState *s = opaque; |
| uint8_t *pci_conf; |
| int i; |
| UHCIPort *port; |
| |
| DPRINTF("uhci: full reset\n"); |
| |
| pci_conf = s->dev.config; |
| |
| pci_conf[0x6a] = 0x01; /* usb clock */ |
| pci_conf[0x6b] = 0x00; |
| s->cmd = 0; |
| s->status = 0; |
| s->status2 = 0; |
| s->intr = 0; |
| s->fl_base_addr = 0; |
| s->sof_timing = 64; |
| |
| for(i = 0; i < NB_PORTS; i++) { |
| port = &s->ports[i]; |
| port->ctrl = 0x0080; |
| if (port->port.dev && port->port.dev->attached) { |
| usb_port_reset(&port->port); |
| } |
| } |
| |
| uhci_async_cancel_all(s); |
| } |
| |
| static void uhci_pre_save(void *opaque) |
| { |
| UHCIState *s = opaque; |
| |
| uhci_async_cancel_all(s); |
| } |
| |
| static const VMStateDescription vmstate_uhci_port = { |
| .name = "uhci port", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField []) { |
| VMSTATE_UINT16(ctrl, UHCIPort), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_uhci = { |
| .name = "uhci", |
| .version_id = 2, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .pre_save = uhci_pre_save, |
| .fields = (VMStateField []) { |
| VMSTATE_PCI_DEVICE(dev, UHCIState), |
| VMSTATE_UINT8_EQUAL(num_ports_vmstate, UHCIState), |
| VMSTATE_STRUCT_ARRAY(ports, UHCIState, NB_PORTS, 1, |
| vmstate_uhci_port, UHCIPort), |
| VMSTATE_UINT16(cmd, UHCIState), |
| VMSTATE_UINT16(status, UHCIState), |
| VMSTATE_UINT16(intr, UHCIState), |
| VMSTATE_UINT16(frnum, UHCIState), |
| VMSTATE_UINT32(fl_base_addr, UHCIState), |
| VMSTATE_UINT8(sof_timing, UHCIState), |
| VMSTATE_UINT8(status2, UHCIState), |
| VMSTATE_TIMER(frame_timer, UHCIState), |
| VMSTATE_INT64_V(expire_time, UHCIState, 2), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void uhci_ioport_writeb(void *opaque, uint32_t addr, uint32_t val) |
| { |
| UHCIState *s = opaque; |
| |
| addr &= 0x1f; |
| switch(addr) { |
| case 0x0c: |
| s->sof_timing = val; |
| break; |
| } |
| } |
| |
| static uint32_t uhci_ioport_readb(void *opaque, uint32_t addr) |
| { |
| UHCIState *s = opaque; |
| uint32_t val; |
| |
| addr &= 0x1f; |
| switch(addr) { |
| case 0x0c: |
| val = s->sof_timing; |
| break; |
| default: |
| val = 0xff; |
| break; |
| } |
| return val; |
| } |
| |
| static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val) |
| { |
| UHCIState *s = opaque; |
| |
| addr &= 0x1f; |
| DPRINTF("uhci: writew port=0x%04x val=0x%04x\n", addr, val); |
| |
| switch(addr) { |
| case 0x00: |
| if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) { |
| /* start frame processing */ |
| s->expire_time = qemu_get_clock_ns(vm_clock) + |
| (get_ticks_per_sec() / FRAME_TIMER_FREQ); |
| qemu_mod_timer(s->frame_timer, qemu_get_clock_ns(vm_clock)); |
| s->status &= ~UHCI_STS_HCHALTED; |
| } else if (!(val & UHCI_CMD_RS)) { |
| s->status |= UHCI_STS_HCHALTED; |
| } |
| if (val & UHCI_CMD_GRESET) { |
| UHCIPort *port; |
| int i; |
| |
| /* send reset on the USB bus */ |
| for(i = 0; i < NB_PORTS; i++) { |
| port = &s->ports[i]; |
| usb_device_reset(port->port.dev); |
| } |
| uhci_reset(s); |
| return; |
| } |
| if (val & UHCI_CMD_HCRESET) { |
| uhci_reset(s); |
| return; |
| } |
| s->cmd = val; |
| break; |
| case 0x02: |
| s->status &= ~val; |
| /* XXX: the chip spec is not coherent, so we add a hidden |
| register to distinguish between IOC and SPD */ |
| if (val & UHCI_STS_USBINT) |
| s->status2 = 0; |
| uhci_update_irq(s); |
| break; |
| case 0x04: |
| s->intr = val; |
| uhci_update_irq(s); |
| break; |
| case 0x06: |
| if (s->status & UHCI_STS_HCHALTED) |
| s->frnum = val & 0x7ff; |
| break; |
| case 0x10 ... 0x1f: |
| { |
| UHCIPort *port; |
| USBDevice *dev; |
| int n; |
| |
| n = (addr >> 1) & 7; |
| if (n >= NB_PORTS) |
| return; |
| port = &s->ports[n]; |
| dev = port->port.dev; |
| if (dev && dev->attached) { |
| /* port reset */ |
| if ( (val & UHCI_PORT_RESET) && |
| !(port->ctrl & UHCI_PORT_RESET) ) { |
| usb_device_reset(dev); |
| } |
| } |
| port->ctrl &= UHCI_PORT_READ_ONLY; |
| port->ctrl |= (val & ~UHCI_PORT_READ_ONLY); |
| /* some bits are reset when a '1' is written to them */ |
| port->ctrl &= ~(val & UHCI_PORT_WRITE_CLEAR); |
| } |
| break; |
| } |
| } |
| |
| static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr) |
| { |
| UHCIState *s = opaque; |
| uint32_t val; |
| |
| addr &= 0x1f; |
| switch(addr) { |
| case 0x00: |
| val = s->cmd; |
| break; |
| case 0x02: |
| val = s->status; |
| break; |
| case 0x04: |
| val = s->intr; |
| break; |
| case 0x06: |
| val = s->frnum; |
| break; |
| case 0x10 ... 0x1f: |
| { |
| UHCIPort *port; |
| int n; |
| n = (addr >> 1) & 7; |
| if (n >= NB_PORTS) |
| goto read_default; |
| port = &s->ports[n]; |
| val = port->ctrl; |
| } |
| break; |
| default: |
| read_default: |
| val = 0xff7f; /* disabled port */ |
| break; |
| } |
| |
| DPRINTF("uhci: readw port=0x%04x val=0x%04x\n", addr, val); |
| |
| return val; |
| } |
| |
| static void uhci_ioport_writel(void *opaque, uint32_t addr, uint32_t val) |
| { |
| UHCIState *s = opaque; |
| |
| addr &= 0x1f; |
| DPRINTF("uhci: writel port=0x%04x val=0x%08x\n", addr, val); |
| |
| switch(addr) { |
| case 0x08: |
| s->fl_base_addr = val & ~0xfff; |
| break; |
| } |
| } |
| |
| static uint32_t uhci_ioport_readl(void *opaque, uint32_t addr) |
| { |
| UHCIState *s = opaque; |
| uint32_t val; |
| |
| addr &= 0x1f; |
| switch(addr) { |
| case 0x08: |
| val = s->fl_base_addr; |
| break; |
| default: |
| val = 0xffffffff; |
| break; |
| } |
| return val; |
| } |
| |
| /* signal resume if controller suspended */ |
| static void uhci_resume (void *opaque) |
| { |
| UHCIState *s = (UHCIState *)opaque; |
| |
| if (!s) |
| return; |
| |
| if (s->cmd & UHCI_CMD_EGSM) { |
| s->cmd |= UHCI_CMD_FGR; |
| s->status |= UHCI_STS_RD; |
| uhci_update_irq(s); |
| } |
| } |
| |
| static void uhci_attach(USBPort *port1) |
| { |
| UHCIState *s = port1->opaque; |
| UHCIPort *port = &s->ports[port1->index]; |
| |
| /* set connect status */ |
| port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC; |
| |
| /* update speed */ |
| if (port->port.dev->speed == USB_SPEED_LOW) { |
| port->ctrl |= UHCI_PORT_LSDA; |
| } else { |
| port->ctrl &= ~UHCI_PORT_LSDA; |
| } |
| |
| uhci_resume(s); |
| } |
| |
| static void uhci_detach(USBPort *port1) |
| { |
| UHCIState *s = port1->opaque; |
| UHCIPort *port = &s->ports[port1->index]; |
| |
| uhci_async_cancel_device(s, port1->dev); |
| |
| /* set connect status */ |
| if (port->ctrl & UHCI_PORT_CCS) { |
| port->ctrl &= ~UHCI_PORT_CCS; |
| port->ctrl |= UHCI_PORT_CSC; |
| } |
| /* disable port */ |
| if (port->ctrl & UHCI_PORT_EN) { |
| port->ctrl &= ~UHCI_PORT_EN; |
| port->ctrl |= UHCI_PORT_ENC; |
| } |
| |
| uhci_resume(s); |
| } |
| |
| static void uhci_child_detach(USBPort *port1, USBDevice *child) |
| { |
| UHCIState *s = port1->opaque; |
| |
| uhci_async_cancel_device(s, child); |
| } |
| |
| static void uhci_wakeup(USBPort *port1) |
| { |
| UHCIState *s = port1->opaque; |
| UHCIPort *port = &s->ports[port1->index]; |
| |
| if (port->ctrl & UHCI_PORT_SUSPEND && !(port->ctrl & UHCI_PORT_RD)) { |
| port->ctrl |= UHCI_PORT_RD; |
| uhci_resume(s); |
| } |
| } |
| |
| static USBDevice *uhci_find_device(UHCIState *s, uint8_t addr) |
| { |
| USBDevice *dev; |
| int i; |
| |
| for (i = 0; i < NB_PORTS; i++) { |
| UHCIPort *port = &s->ports[i]; |
| if (!(port->ctrl & UHCI_PORT_EN)) { |
| continue; |
| } |
| dev = usb_find_device(&port->port, addr); |
| if (dev != NULL) { |
| return dev; |
| } |
| } |
| return NULL; |
| } |
| |
| static void uhci_async_complete(USBPort *port, USBPacket *packet); |
| static void uhci_process_frame(UHCIState *s); |
| |
| /* return -1 if fatal error (frame must be stopped) |
| 0 if TD successful |
| 1 if TD unsuccessful or inactive |
| */ |
| static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_t *int_mask) |
| { |
| int len = 0, max_len, err, ret; |
| uint8_t pid; |
| |
| max_len = ((td->token >> 21) + 1) & 0x7ff; |
| pid = td->token & 0xff; |
| |
| ret = async->packet.result; |
| |
| if (td->ctrl & TD_CTRL_IOS) |
| td->ctrl &= ~TD_CTRL_ACTIVE; |
| |
| if (ret < 0) |
| goto out; |
| |
| len = async->packet.result; |
| td->ctrl = (td->ctrl & ~0x7ff) | ((len - 1) & 0x7ff); |
| |
| /* The NAK bit may have been set by a previous frame, so clear it |
| here. The docs are somewhat unclear, but win2k relies on this |
| behavior. */ |
| td->ctrl &= ~(TD_CTRL_ACTIVE | TD_CTRL_NAK); |
| if (td->ctrl & TD_CTRL_IOC) |
| *int_mask |= 0x01; |
| |
| if (pid == USB_TOKEN_IN) { |
| if (len > max_len) { |
| ret = USB_RET_BABBLE; |
| goto out; |
| } |
| |
| if ((td->ctrl & TD_CTRL_SPD) && len < max_len) { |
| *int_mask |= 0x02; |
| /* short packet: do not update QH */ |
| DPRINTF("uhci: short packet. td 0x%x token 0x%x\n", async->td, async->token); |
| return 1; |
| } |
| } |
| |
| /* success */ |
| return 0; |
| |
| out: |
| switch(ret) { |
| case USB_RET_STALL: |
| td->ctrl |= TD_CTRL_STALL; |
| td->ctrl &= ~TD_CTRL_ACTIVE; |
| s->status |= UHCI_STS_USBERR; |
| if (td->ctrl & TD_CTRL_IOC) { |
| *int_mask |= 0x01; |
| } |
| uhci_update_irq(s); |
| return 1; |
| |
| case USB_RET_BABBLE: |
| td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL; |
| td->ctrl &= ~TD_CTRL_ACTIVE; |
| s->status |= UHCI_STS_USBERR; |
| if (td->ctrl & TD_CTRL_IOC) { |
| *int_mask |= 0x01; |
| } |
| uhci_update_irq(s); |
| /* frame interrupted */ |
| return -1; |
| |
| case USB_RET_NAK: |
| td->ctrl |= TD_CTRL_NAK; |
| if (pid == USB_TOKEN_SETUP) |
| break; |
| return 1; |
| |
| case USB_RET_NODEV: |
| default: |
| break; |
| } |
| |
| /* Retry the TD if error count is not zero */ |
| |
| td->ctrl |= TD_CTRL_TIMEOUT; |
| err = (td->ctrl >> TD_CTRL_ERROR_SHIFT) & 3; |
| if (err != 0) { |
| err--; |
| if (err == 0) { |
| td->ctrl &= ~TD_CTRL_ACTIVE; |
| s->status |= UHCI_STS_USBERR; |
| if (td->ctrl & TD_CTRL_IOC) |
| *int_mask |= 0x01; |
| uhci_update_irq(s); |
| } |
| } |
| td->ctrl = (td->ctrl & ~(3 << TD_CTRL_ERROR_SHIFT)) | |
| (err << TD_CTRL_ERROR_SHIFT); |
| return 1; |
| } |
| |
| static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td, uint32_t *int_mask) |
| { |
| UHCIAsync *async; |
| int len = 0, max_len; |
| uint8_t pid, isoc; |
| uint32_t token; |
| USBDevice *dev; |
| USBEndpoint *ep; |
| |
| /* Is active ? */ |
| if (!(td->ctrl & TD_CTRL_ACTIVE)) |
| return 1; |
| |
| /* token field is not unique for isochronous requests, |
| * so use the destination buffer |
| */ |
| if (td->ctrl & TD_CTRL_IOS) { |
| token = td->buffer; |
| isoc = 1; |
| } else { |
| token = td->token; |
| isoc = 0; |
| } |
| |
| async = uhci_async_find_td(s, addr, token); |
| if (async) { |
| /* Already submitted */ |
| async->valid = 32; |
| |
| if (!async->done) |
| return 1; |
| |
| uhci_async_unlink(s, async); |
| goto done; |
| } |
| |
| /* Allocate new packet */ |
| async = uhci_async_alloc(s); |
| if (!async) |
| return 1; |
| |
| /* valid needs to be large enough to handle 10 frame delay |
| * for initial isochronous requests |
| */ |
| async->valid = 32; |
| async->td = addr; |
| async->token = token; |
| async->isoc = isoc; |
| |
| max_len = ((td->token >> 21) + 1) & 0x7ff; |
| pid = td->token & 0xff; |
| |
| dev = uhci_find_device(s, (td->token >> 8) & 0x7f); |
| ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf); |
| usb_packet_setup(&async->packet, pid, ep); |
| qemu_sglist_add(&async->sgl, td->buffer, max_len); |
| usb_packet_map(&async->packet, &async->sgl); |
| |
| switch(pid) { |
| case USB_TOKEN_OUT: |
| case USB_TOKEN_SETUP: |
| len = usb_handle_packet(dev, &async->packet); |
| if (len >= 0) |
| len = max_len; |
| break; |
| |
| case USB_TOKEN_IN: |
| len = usb_handle_packet(dev, &async->packet); |
| break; |
| |
| default: |
| /* invalid pid : frame interrupted */ |
| uhci_async_free(s, async); |
| s->status |= UHCI_STS_HCPERR; |
| uhci_update_irq(s); |
| return -1; |
| } |
| |
| if (len == USB_RET_ASYNC) { |
| uhci_async_link(s, async); |
| return 2; |
| } |
| |
| async->packet.result = len; |
| |
| done: |
| len = uhci_complete_td(s, td, async, int_mask); |
| usb_packet_unmap(&async->packet); |
| uhci_async_free(s, async); |
| return len; |
| } |
| |
| static void uhci_async_complete(USBPort *port, USBPacket *packet) |
| { |
| UHCIAsync *async = container_of(packet, UHCIAsync, packet); |
| UHCIState *s = async->uhci; |
| |
| DPRINTF("uhci: async complete. td 0x%x token 0x%x\n", async->td, async->token); |
| |
| if (async->isoc) { |
| UHCI_TD td; |
| uint32_t link = async->td; |
| uint32_t int_mask = 0, val; |
| |
| pci_dma_read(&s->dev, link & ~0xf, &td, sizeof(td)); |
| le32_to_cpus(&td.link); |
| le32_to_cpus(&td.ctrl); |
| le32_to_cpus(&td.token); |
| le32_to_cpus(&td.buffer); |
| |
| uhci_async_unlink(s, async); |
| uhci_complete_td(s, &td, async, &int_mask); |
| s->pending_int_mask |= int_mask; |
| |
| /* update the status bits of the TD */ |
| val = cpu_to_le32(td.ctrl); |
| pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val)); |
| uhci_async_free(s, async); |
| } else { |
| async->done = 1; |
| uhci_process_frame(s); |
| } |
| } |
| |
| static int is_valid(uint32_t link) |
| { |
| return (link & 1) == 0; |
| } |
| |
| static int is_qh(uint32_t link) |
| { |
| return (link & 2) != 0; |
| } |
| |
| static int depth_first(uint32_t link) |
| { |
| return (link & 4) != 0; |
| } |
| |
| /* QH DB used for detecting QH loops */ |
| #define UHCI_MAX_QUEUES 128 |
| typedef struct { |
| uint32_t addr[UHCI_MAX_QUEUES]; |
| int count; |
| } QhDb; |
| |
| static void qhdb_reset(QhDb *db) |
| { |
| db->count = 0; |
| } |
| |
| /* Add QH to DB. Returns 1 if already present or DB is full. */ |
| static int qhdb_insert(QhDb *db, uint32_t addr) |
| { |
| int i; |
| for (i = 0; i < db->count; i++) |
| if (db->addr[i] == addr) |
| return 1; |
| |
| if (db->count >= UHCI_MAX_QUEUES) |
| return 1; |
| |
| db->addr[db->count++] = addr; |
| return 0; |
| } |
| |
| static void uhci_process_frame(UHCIState *s) |
| { |
| uint32_t frame_addr, link, old_td_ctrl, val, int_mask; |
| uint32_t curr_qh, td_count = 0, bytes_count = 0; |
| int cnt, ret; |
| UHCI_TD td; |
| UHCI_QH qh; |
| QhDb qhdb; |
| |
| frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2); |
| |
| DPRINTF("uhci: processing frame %d addr 0x%x\n" , s->frnum, frame_addr); |
| |
| pci_dma_read(&s->dev, frame_addr, &link, 4); |
| le32_to_cpus(&link); |
| |
| int_mask = 0; |
| curr_qh = 0; |
| |
| qhdb_reset(&qhdb); |
| |
| for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) { |
| if (is_qh(link)) { |
| /* QH */ |
| |
| if (qhdb_insert(&qhdb, link)) { |
| /* |
| * We're going in circles. Which is not a bug because |
| * HCD is allowed to do that as part of the BW management. |
| * |
| * Stop processing here if |
| * (a) no transaction has been done since we've been |
| * here last time, or |
| * (b) we've reached the usb 1.1 bandwidth, which is |
| * 1280 bytes/frame. |
| */ |
| DPRINTF("uhci: detected loop. qh 0x%x\n", link); |
| if (td_count == 0) { |
| DPRINTF("uhci: no transaction last round, stop\n"); |
| break; |
| } else if (bytes_count >= 1280) { |
| DPRINTF("uhci: bandwidth limit reached, stop\n"); |
| break; |
| } else { |
| td_count = 0; |
| qhdb_reset(&qhdb); |
| qhdb_insert(&qhdb, link); |
| } |
| } |
| |
| pci_dma_read(&s->dev, link & ~0xf, &qh, sizeof(qh)); |
| le32_to_cpus(&qh.link); |
| le32_to_cpus(&qh.el_link); |
| |
| DPRINTF("uhci: QH 0x%x load. link 0x%x elink 0x%x\n", |
| link, qh.link, qh.el_link); |
| |
| if (!is_valid(qh.el_link)) { |
| /* QH w/o elements */ |
| curr_qh = 0; |
| link = qh.link; |
| } else { |
| /* QH with elements */ |
| curr_qh = link; |
| link = qh.el_link; |
| } |
| continue; |
| } |
| |
| /* TD */ |
| pci_dma_read(&s->dev, link & ~0xf, &td, sizeof(td)); |
| le32_to_cpus(&td.link); |
| le32_to_cpus(&td.ctrl); |
| le32_to_cpus(&td.token); |
| le32_to_cpus(&td.buffer); |
| |
| DPRINTF("uhci: TD 0x%x load. link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n", |
| link, td.link, td.ctrl, td.token, curr_qh); |
| |
| old_td_ctrl = td.ctrl; |
| ret = uhci_handle_td(s, link, &td, &int_mask); |
| if (old_td_ctrl != td.ctrl) { |
| /* update the status bits of the TD */ |
| val = cpu_to_le32(td.ctrl); |
| pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val)); |
| } |
| |
| if (ret < 0) { |
| /* interrupted frame */ |
| break; |
| } |
| |
| if (ret == 2 || ret == 1) { |
| DPRINTF("uhci: TD 0x%x %s. link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n", |
| link, ret == 2 ? "pend" : "skip", |
| td.link, td.ctrl, td.token, curr_qh); |
| |
| link = curr_qh ? qh.link : td.link; |
| continue; |
| } |
| |
| /* completed TD */ |
| |
| DPRINTF("uhci: TD 0x%x done. link 0x%x ctrl 0x%x token 0x%x qh 0x%x\n", |
| link, td.link, td.ctrl, td.token, curr_qh); |
| |
| link = td.link; |
| td_count++; |
| bytes_count += (td.ctrl & 0x7ff) + 1; |
| |
| if (curr_qh) { |
| /* update QH element link */ |
| qh.el_link = link; |
| val = cpu_to_le32(qh.el_link); |
| pci_dma_write(&s->dev, (curr_qh & ~0xf) + 4, &val, sizeof(val)); |
| |
| if (!depth_first(link)) { |
| /* done with this QH */ |
| |
| DPRINTF("uhci: QH 0x%x done. link 0x%x elink 0x%x\n", |
| curr_qh, qh.link, qh.el_link); |
| |
| curr_qh = 0; |
| link = qh.link; |
| } |
| } |
| |
| /* go to the next entry */ |
| } |
| |
| s->pending_int_mask |= int_mask; |
| } |
| |
| static void uhci_frame_timer(void *opaque) |
| { |
| UHCIState *s = opaque; |
| |
| /* prepare the timer for the next frame */ |
| s->expire_time += (get_ticks_per_sec() / FRAME_TIMER_FREQ); |
| |
| if (!(s->cmd & UHCI_CMD_RS)) { |
| /* Full stop */ |
| qemu_del_timer(s->frame_timer); |
| /* set hchalted bit in status - UHCI11D 2.1.2 */ |
| s->status |= UHCI_STS_HCHALTED; |
| |
| DPRINTF("uhci: halted\n"); |
| return; |
| } |
| |
| /* Complete the previous frame */ |
| if (s->pending_int_mask) { |
| s->status2 |= s->pending_int_mask; |
| s->status |= UHCI_STS_USBINT; |
| uhci_update_irq(s); |
| } |
| s->pending_int_mask = 0; |
| |
| /* Start new frame */ |
| s->frnum = (s->frnum + 1) & 0x7ff; |
| |
| DPRINTF("uhci: new frame #%u\n" , s->frnum); |
| |
| uhci_async_validate_begin(s); |
| |
| uhci_process_frame(s); |
| |
| uhci_async_validate_end(s); |
| |
| qemu_mod_timer(s->frame_timer, s->expire_time); |
| } |
| |
| static const MemoryRegionPortio uhci_portio[] = { |
| { 0, 32, 2, .write = uhci_ioport_writew, }, |
| { 0, 32, 2, .read = uhci_ioport_readw, }, |
| { 0, 32, 4, .write = uhci_ioport_writel, }, |
| { 0, 32, 4, .read = uhci_ioport_readl, }, |
| { 0, 32, 1, .write = uhci_ioport_writeb, }, |
| { 0, 32, 1, .read = uhci_ioport_readb, }, |
| PORTIO_END_OF_LIST() |
| }; |
| |
| static const MemoryRegionOps uhci_ioport_ops = { |
| .old_portio = uhci_portio, |
| }; |
| |
| static USBPortOps uhci_port_ops = { |
| .attach = uhci_attach, |
| .detach = uhci_detach, |
| .child_detach = uhci_child_detach, |
| .wakeup = uhci_wakeup, |
| .complete = uhci_async_complete, |
| }; |
| |
| static USBBusOps uhci_bus_ops = { |
| }; |
| |
| static int usb_uhci_common_initfn(PCIDevice *dev) |
| { |
| UHCIState *s = DO_UPCAST(UHCIState, dev, dev); |
| uint8_t *pci_conf = s->dev.config; |
| int i; |
| |
| pci_conf[PCI_CLASS_PROG] = 0x00; |
| /* TODO: reset value should be 0. */ |
| pci_conf[PCI_INTERRUPT_PIN] = 4; /* interrupt pin D */ |
| pci_conf[USB_SBRN] = USB_RELEASE_1; // release number |
| |
| if (s->masterbus) { |
| USBPort *ports[NB_PORTS]; |
| for(i = 0; i < NB_PORTS; i++) { |
| ports[i] = &s->ports[i].port; |
| } |
| if (usb_register_companion(s->masterbus, ports, NB_PORTS, |
| s->firstport, s, &uhci_port_ops, |
| USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) { |
| return -1; |
| } |
| } else { |
| usb_bus_new(&s->bus, &uhci_bus_ops, &s->dev.qdev); |
| for (i = 0; i < NB_PORTS; i++) { |
| usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops, |
| USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); |
| } |
| } |
| s->frame_timer = qemu_new_timer_ns(vm_clock, uhci_frame_timer, s); |
| s->num_ports_vmstate = NB_PORTS; |
| QTAILQ_INIT(&s->async_pending); |
| |
| qemu_register_reset(uhci_reset, s); |
| |
| memory_region_init_io(&s->io_bar, &uhci_ioport_ops, s, "uhci", 0x20); |
| /* Use region 4 for consistency with real hardware. BSD guests seem |
| to rely on this. */ |
| pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar); |
| |
| return 0; |
| } |
| |
| static int usb_uhci_vt82c686b_initfn(PCIDevice *dev) |
| { |
| UHCIState *s = DO_UPCAST(UHCIState, dev, dev); |
| uint8_t *pci_conf = s->dev.config; |
| |
| /* USB misc control 1/2 */ |
| pci_set_long(pci_conf + 0x40,0x00001000); |
| /* PM capability */ |
| pci_set_long(pci_conf + 0x80,0x00020001); |
| /* USB legacy support */ |
| pci_set_long(pci_conf + 0xc0,0x00002000); |
| |
| return usb_uhci_common_initfn(dev); |
| } |
| |
| static int usb_uhci_exit(PCIDevice *dev) |
| { |
| UHCIState *s = DO_UPCAST(UHCIState, dev, dev); |
| |
| memory_region_destroy(&s->io_bar); |
| return 0; |
| } |
| |
| static Property uhci_properties[] = { |
| DEFINE_PROP_STRING("masterbus", UHCIState, masterbus), |
| DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void piix3_uhci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = usb_uhci_common_initfn; |
| k->exit = usb_uhci_exit; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| k->device_id = PCI_DEVICE_ID_INTEL_82371SB_2; |
| k->revision = 0x01; |
| k->class_id = PCI_CLASS_SERIAL_USB; |
| dc->vmsd = &vmstate_uhci; |
| dc->props = uhci_properties; |
| } |
| |
| static TypeInfo piix3_uhci_info = { |
| .name = "piix3-usb-uhci", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(UHCIState), |
| .class_init = piix3_uhci_class_init, |
| }; |
| |
| static void piix4_uhci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = usb_uhci_common_initfn; |
| k->exit = usb_uhci_exit; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| k->device_id = PCI_DEVICE_ID_INTEL_82371AB_2; |
| k->revision = 0x01; |
| k->class_id = PCI_CLASS_SERIAL_USB; |
| dc->vmsd = &vmstate_uhci; |
| dc->props = uhci_properties; |
| } |
| |
| static TypeInfo piix4_uhci_info = { |
| .name = "piix4-usb-uhci", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(UHCIState), |
| .class_init = piix4_uhci_class_init, |
| }; |
| |
| static void vt82c686b_uhci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = usb_uhci_vt82c686b_initfn; |
| k->exit = usb_uhci_exit; |
| k->vendor_id = PCI_VENDOR_ID_VIA; |
| k->device_id = PCI_DEVICE_ID_VIA_UHCI; |
| k->revision = 0x01; |
| k->class_id = PCI_CLASS_SERIAL_USB; |
| dc->vmsd = &vmstate_uhci; |
| dc->props = uhci_properties; |
| } |
| |
| static TypeInfo vt82c686b_uhci_info = { |
| .name = "vt82c686b-usb-uhci", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(UHCIState), |
| .class_init = vt82c686b_uhci_class_init, |
| }; |
| |
| static void ich9_uhci1_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = usb_uhci_common_initfn; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| k->device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1; |
| k->revision = 0x03; |
| k->class_id = PCI_CLASS_SERIAL_USB; |
| dc->vmsd = &vmstate_uhci; |
| dc->props = uhci_properties; |
| } |
| |
| static TypeInfo ich9_uhci1_info = { |
| .name = "ich9-usb-uhci1", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(UHCIState), |
| .class_init = ich9_uhci1_class_init, |
| }; |
| |
| static void ich9_uhci2_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = usb_uhci_common_initfn; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| k->device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2; |
| k->revision = 0x03; |
| k->class_id = PCI_CLASS_SERIAL_USB; |
| dc->vmsd = &vmstate_uhci; |
| dc->props = uhci_properties; |
| } |
| |
| static TypeInfo ich9_uhci2_info = { |
| .name = "ich9-usb-uhci2", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(UHCIState), |
| .class_init = ich9_uhci2_class_init, |
| }; |
| |
| static void ich9_uhci3_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = usb_uhci_common_initfn; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| k->device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3; |
| k->revision = 0x03; |
| k->class_id = PCI_CLASS_SERIAL_USB; |
| dc->vmsd = &vmstate_uhci; |
| dc->props = uhci_properties; |
| } |
| |
| static TypeInfo ich9_uhci3_info = { |
| .name = "ich9-usb-uhci3", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(UHCIState), |
| .class_init = ich9_uhci3_class_init, |
| }; |
| |
| static void uhci_register_types(void) |
| { |
| type_register_static(&piix3_uhci_info); |
| type_register_static(&piix4_uhci_info); |
| type_register_static(&vt82c686b_uhci_info); |
| type_register_static(&ich9_uhci1_info); |
| type_register_static(&ich9_uhci2_info); |
| type_register_static(&ich9_uhci3_info); |
| } |
| |
| type_init(uhci_register_types) |
| |
| void usb_uhci_piix3_init(PCIBus *bus, int devfn) |
| { |
| pci_create_simple(bus, devfn, "piix3-usb-uhci"); |
| } |
| |
| void usb_uhci_piix4_init(PCIBus *bus, int devfn) |
| { |
| pci_create_simple(bus, devfn, "piix4-usb-uhci"); |
| } |
| |
| void usb_uhci_vt82c686b_init(PCIBus *bus, int devfn) |
| { |
| pci_create_simple(bus, devfn, "vt82c686b-usb-uhci"); |
| } |