hw/intc/aspeed_vic.c - qemu - Git at Google

 /*
  * ASPEED Interrupt Controller (New)
  *
  * Andrew Jeffery <andrew@aj.id.au>
  *
  * Copyright 2015, 2016 IBM Corp.
  *
  * This code is licensed under the GPL version 2 or later.  See
  * the COPYING file in the top-level directory.
  */

 /* The hardware exposes two register sets, a legacy set and a 'new' set. The
  * model implements the 'new' register set, and logs warnings on accesses to
  * the legacy IO space.
  *
  * The hardware uses 32bit registers to manage 51 IRQs, with low and high
  * registers for each conceptual register. The device model's implementation
  * uses 64bit data types to store both low and high register values (in the one
  * member), but must cope with access offset values in multiples of 4 passed to
  * the callbacks. As such the read() and write() implementations process the
  * provided offset to understand whether the access is requesting the lower or
  * upper 32 bits of the 64bit member.
  *
  * Additionally, the "Interrupt Enable", "Edge Status" and "Software Interrupt"
  * fields have separate "enable"/"status" and "clear" registers, where set bits
  * are written to one or the other to change state (avoiding a
  * read-modify-write sequence).
  */

 #include "qemu/osdep.h"
 #include "hw/intc/aspeed_vic.h"
 #include "hw/irq.h"
 #include "migration/vmstate.h"
 #include "qemu/bitops.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "trace.h"

 #define AVIC_NEW_BASE_OFFSET 0x80

 #define AVIC_L_MASK 0xFFFFFFFFU
 #define AVIC_H_MASK 0x0007FFFFU
 #define AVIC_EVENT_W_MASK (0x78000ULL << 32)

 static void aspeed_vic_update(AspeedVICState *s)
 {
     uint64_t new = (s->raw & s->enable);
     uint64_t flags;

     flags = new & s->select;
     trace_aspeed_vic_update_fiq(!!flags);
     qemu_set_irq(s->fiq, !!flags);

     flags = new & ~s->select;
     trace_aspeed_vic_update_irq(!!flags);
     qemu_set_irq(s->irq, !!flags);
 }

 static void aspeed_vic_set_irq(void *opaque, int irq, int level)
 {
     uint64_t irq_mask;
     bool raise;
     AspeedVICState *s = (AspeedVICState *)opaque;

     if (irq > ASPEED_VIC_NR_IRQS) {
         qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
                       __func__, irq);
         return;
     }

     trace_aspeed_vic_set_irq(irq, level);

     irq_mask = BIT(irq);
     if (s->sense & irq_mask) {
         /* level-triggered */
         if (s->event & irq_mask) {
             /* high-sensitive */
             raise = level;
         } else {
             /* low-sensitive */
             raise = !level;
         }
         s->raw = deposit64(s->raw, irq, 1, raise);
     } else {
         uint64_t old_level = s->level & irq_mask;

         /* edge-triggered */
         if (s->dual_edge & irq_mask) {
             raise = (!!old_level) != (!!level);
         } else {
             if (s->event & irq_mask) {
                 /* rising-sensitive */
                 raise = !old_level && level;
             } else {
                 /* falling-sensitive */
                 raise = old_level && !level;
             }
         }
         if (raise) {
             s->raw = deposit64(s->raw, irq, 1, raise);
         }
     }
     s->level = deposit64(s->level, irq, 1, level);
     aspeed_vic_update(s);
 }

 static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size)
 {
     AspeedVICState *s = (AspeedVICState *)opaque;
     hwaddr n_offset;
     uint64_t val;
     bool high;

     if (offset < AVIC_NEW_BASE_OFFSET) {
         high = false;
         n_offset = offset;
     } else {
         high = !!(offset & 0x4);
         n_offset = (offset & ~0x4);
     }

     switch (n_offset) {
     case 0x80: /* IRQ Status */
     case 0x00:
         val = s->raw & ~s->select & s->enable;
         break;
     case 0x88: /* FIQ Status */
     case 0x04:
         val = s->raw & s->select & s->enable;
         break;
     case 0x90: /* Raw Interrupt Status */
     case 0x08:
         val = s->raw;
         break;
     case 0x98: /* Interrupt Selection */
     case 0x0c:
         val = s->select;
         break;
     case 0xa0: /* Interrupt Enable */
     case 0x10:
         val = s->enable;
         break;
     case 0xb0: /* Software Interrupt */
     case 0x18:
         val = s->trigger;
         break;
     case 0xc0: /* Interrupt Sensitivity */
     case 0x24:
         val = s->sense;
         break;
     case 0xc8: /* Interrupt Both Edge Trigger Control */
     case 0x28:
         val = s->dual_edge;
         break;
     case 0xd0: /* Interrupt Event */
     case 0x2c:
         val = s->event;
         break;
     case 0xe0: /* Edge Triggered Interrupt Status */
         val = s->raw & ~s->sense;
         break;
         /* Illegal */
     case 0xa8: /* Interrupt Enable Clear */
     case 0xb8: /* Software Interrupt Clear */
     case 0xd8: /* Edge Triggered Interrupt Clear */
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Read of write-only register with offset 0x%"
                       HWADDR_PRIx "\n", __func__, offset);
         val = 0;
         break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Bad register at offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
         val = 0;
         break;
     }
     if (high) {
         val = extract64(val, 32, 19);
     } else {
         val = extract64(val, 0, 32);
     }
     trace_aspeed_vic_read(offset, size, val);
     return val;
 }

 static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data,
                              unsigned size)
 {
     AspeedVICState *s = (AspeedVICState *)opaque;
     hwaddr n_offset;
     bool high;

     if (offset < AVIC_NEW_BASE_OFFSET) {
         high = false;
         n_offset = offset;
     } else {
         high = !!(offset & 0x4);
         n_offset = (offset & ~0x4);
     }

     trace_aspeed_vic_write(offset, size, data);

     /* Given we have members using separate enable/clear registers, deposit64()
      * isn't quite the tool for the job. Instead, relocate the incoming bits to
      * the required bit offset based on the provided access address
      */
     if (high) {
         data &= AVIC_H_MASK;
         data <<= 32;
     } else {
         data &= AVIC_L_MASK;
     }

     switch (n_offset) {
     case 0x98: /* Interrupt Selection */
     case 0x0c:
         /* Register has deposit64() semantics - overwrite requested 32 bits */
         if (high) {
             s->select &= AVIC_L_MASK;
         } else {
             s->select &= ((uint64_t) AVIC_H_MASK) << 32;
         }
         s->select |= data;
         break;
     case 0xa0: /* Interrupt Enable */
     case 0x10:
         s->enable |= data;
         break;
     case 0xa8: /* Interrupt Enable Clear */
     case 0x14:
         s->enable &= ~data;
         break;
     case 0xb0: /* Software Interrupt */
     case 0x18:
         qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. "
                       "IRQs requested: 0x%016" PRIx64 "\n", __func__, data);
         break;
     case 0xb8: /* Software Interrupt Clear */
     case 0x1c:
         qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. "
                       "IRQs to be cleared: 0x%016" PRIx64 "\n", __func__, data);
         break;
     case 0xd0: /* Interrupt Event */
         /* Register has deposit64() semantics - overwrite the top four valid
          * IRQ bits, as only the top four IRQs (GPIOs) can change their event
          * type */
         if (high) {
             s->event &= ~AVIC_EVENT_W_MASK;
             s->event |= (data & AVIC_EVENT_W_MASK);
         } else {
             qemu_log_mask(LOG_GUEST_ERROR,
                           "Ignoring invalid write to interrupt event register");
         }
         break;
     case 0xd8: /* Edge Triggered Interrupt Clear */
     case 0x38:
         s->raw &= ~(data & ~s->sense);
         break;
     case 0x80: /* IRQ Status */
     case 0x00:
     case 0x88: /* FIQ Status */
     case 0x04:
     case 0x90: /* Raw Interrupt Status */
     case 0x08:
     case 0xc0: /* Interrupt Sensitivity */
     case 0x24:
     case 0xc8: /* Interrupt Both Edge Trigger Control */
     case 0x28:
     case 0xe0: /* Edge Triggered Interrupt Status */
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Write of read-only register with offset 0x%"
                       HWADDR_PRIx "\n", __func__, offset);
         break;

     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Bad register at offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
         break;
     }
     aspeed_vic_update(s);
 }

 static const MemoryRegionOps aspeed_vic_ops = {
     .read = aspeed_vic_read,
     .write = aspeed_vic_write,
     .endianness = DEVICE_LITTLE_ENDIAN,
     .valid.min_access_size = 4,
     .valid.max_access_size = 4,
     .valid.unaligned = false,
 };

 static void aspeed_vic_reset(DeviceState *dev)
 {
     AspeedVICState *s = ASPEED_VIC(dev);

     s->level = 0;
     s->raw = 0;
     s->select = 0;
     s->enable = 0;
     s->trigger = 0;
     s->sense = 0x1F07FFF8FFFFULL;
     s->dual_edge = 0xF800070000ULL;
     s->event = 0x5F07FFF8FFFFULL;
 }

 #define AVIC_IO_REGION_SIZE 0x20000

 static void aspeed_vic_realize(DeviceState *dev, Error **errp)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
     AspeedVICState *s = ASPEED_VIC(dev);

     memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_vic_ops, s,
                           TYPE_ASPEED_VIC, AVIC_IO_REGION_SIZE);

     sysbus_init_mmio(sbd, &s->iomem);

     qdev_init_gpio_in(dev, aspeed_vic_set_irq, ASPEED_VIC_NR_IRQS);
     sysbus_init_irq(sbd, &s->irq);
     sysbus_init_irq(sbd, &s->fiq);
 }

 static const VMStateDescription vmstate_aspeed_vic = {
     .name = "aspeed.new-vic",
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
         VMSTATE_UINT64(level, AspeedVICState),
         VMSTATE_UINT64(raw, AspeedVICState),
         VMSTATE_UINT64(select, AspeedVICState),
         VMSTATE_UINT64(enable, AspeedVICState),
         VMSTATE_UINT64(trigger, AspeedVICState),
         VMSTATE_UINT64(sense, AspeedVICState),
         VMSTATE_UINT64(dual_edge, AspeedVICState),
         VMSTATE_UINT64(event, AspeedVICState),
         VMSTATE_END_OF_LIST()
     }
 };

 static void aspeed_vic_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
     dc->realize = aspeed_vic_realize;
     dc->reset = aspeed_vic_reset;
     dc->desc = "ASPEED Interrupt Controller (New)";
     dc->vmsd = &vmstate_aspeed_vic;
 }

 static const TypeInfo aspeed_vic_info = {
     .name = TYPE_ASPEED_VIC,
     .parent = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(AspeedVICState),
     .class_init = aspeed_vic_class_init,
 };

 static void aspeed_vic_register_types(void)
 {
     type_register_static(&aspeed_vic_info);
 }

 type_init(aspeed_vic_register_types);
	/*
	* ASPEED Interrupt Controller (New)
	*
	* Andrew Jeffery <andrew@aj.id.au>
	*
	* Copyright 2015, 2016 IBM Corp.
	*
	* This code is licensed under the GPL version 2 or later. See
	* the COPYING file in the top-level directory.
	*/

	/* The hardware exposes two register sets, a legacy set and a 'new' set. The
	* model implements the 'new' register set, and logs warnings on accesses to
	* the legacy IO space.
	*
	* The hardware uses 32bit registers to manage 51 IRQs, with low and high
	* registers for each conceptual register. The device model's implementation
	* uses 64bit data types to store both low and high register values (in the one
	* member), but must cope with access offset values in multiples of 4 passed to
	* the callbacks. As such the read() and write() implementations process the
	* provided offset to understand whether the access is requesting the lower or
	* upper 32 bits of the 64bit member.
	*
	* Additionally, the "Interrupt Enable", "Edge Status" and "Software Interrupt"
	* fields have separate "enable"/"status" and "clear" registers, where set bits
	* are written to one or the other to change state (avoiding a
	* read-modify-write sequence).
	*/

	#include "qemu/osdep.h"
	#include "hw/intc/aspeed_vic.h"
	#include "hw/irq.h"
	#include "migration/vmstate.h"
	#include "qemu/bitops.h"
	#include "qemu/log.h"
	#include "qemu/module.h"
	#include "trace.h"

	#define AVIC_NEW_BASE_OFFSET 0x80

	#define AVIC_L_MASK 0xFFFFFFFFU
	#define AVIC_H_MASK 0x0007FFFFU
	#define AVIC_EVENT_W_MASK (0x78000ULL << 32)

	static void aspeed_vic_update(AspeedVICState *s)
	{
	uint64_t new = (s->raw & s->enable);
	uint64_t flags;

	flags = new & s->select;
	trace_aspeed_vic_update_fiq(!!flags);
	qemu_set_irq(s->fiq, !!flags);

	flags = new & ~s->select;
	trace_aspeed_vic_update_irq(!!flags);
	qemu_set_irq(s->irq, !!flags);
	}

	static void aspeed_vic_set_irq(void *opaque, int irq, int level)
	{
	uint64_t irq_mask;
	bool raise;
	AspeedVICState s = (AspeedVICState )opaque;

	if (irq > ASPEED_VIC_NR_IRQS) {
	qemu_log_mask(LOG_GUEST_ERROR, "%s: Invalid interrupt number: %d\n",
	__func__, irq);
	return;
	}

	trace_aspeed_vic_set_irq(irq, level);

	irq_mask = BIT(irq);
	if (s->sense & irq_mask) {
	/* level-triggered */
	if (s->event & irq_mask) {
	/* high-sensitive */
	raise = level;
	} else {
	/* low-sensitive */
	raise = !level;
	}
	s->raw = deposit64(s->raw, irq, 1, raise);
	} else {
	uint64_t old_level = s->level & irq_mask;

	/* edge-triggered */
	if (s->dual_edge & irq_mask) {
	raise = (!!old_level) != (!!level);
	} else {
	if (s->event & irq_mask) {
	/* rising-sensitive */
	raise = !old_level && level;
	} else {
	/* falling-sensitive */
	raise = old_level && !level;
	}
	}
	if (raise) {
	s->raw = deposit64(s->raw, irq, 1, raise);
	}
	}
	s->level = deposit64(s->level, irq, 1, level);
	aspeed_vic_update(s);
	}

	static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size)
	{
	AspeedVICState s = (AspeedVICState )opaque;
	hwaddr n_offset;
	uint64_t val;
	bool high;

	if (offset < AVIC_NEW_BASE_OFFSET) {
	high = false;
	n_offset = offset;
	} else {
	high = !!(offset & 0x4);
	n_offset = (offset & ~0x4);
	}

	switch (n_offset) {
	case 0x80: /* IRQ Status */
	case 0x00:
	val = s->raw & ~s->select & s->enable;
	break;
	case 0x88: /* FIQ Status */
	case 0x04:
	val = s->raw & s->select & s->enable;
	break;
	case 0x90: /* Raw Interrupt Status */
	case 0x08:
	val = s->raw;
	break;
	case 0x98: /* Interrupt Selection */
	case 0x0c:
	val = s->select;
	break;
	case 0xa0: /* Interrupt Enable */
	case 0x10:
	val = s->enable;
	break;
	case 0xb0: /* Software Interrupt */
	case 0x18:
	val = s->trigger;
	break;
	case 0xc0: /* Interrupt Sensitivity */
	case 0x24:
	val = s->sense;
	break;
	case 0xc8: /* Interrupt Both Edge Trigger Control */
	case 0x28:
	val = s->dual_edge;
	break;
	case 0xd0: /* Interrupt Event */
	case 0x2c:
	val = s->event;
	break;
	case 0xe0: /* Edge Triggered Interrupt Status */
	val = s->raw & ~s->sense;
	break;
	/* Illegal */
	case 0xa8: /* Interrupt Enable Clear */
	case 0xb8: /* Software Interrupt Clear */
	case 0xd8: /* Edge Triggered Interrupt Clear */
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Read of write-only register with offset 0x%"
	HWADDR_PRIx "\n", __func__, offset);
	val = 0;
	break;
	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Bad register at offset 0x%" HWADDR_PRIx "\n",
	__func__, offset);
	val = 0;
	break;
	}
	if (high) {
	val = extract64(val, 32, 19);
	} else {
	val = extract64(val, 0, 32);
	}
	trace_aspeed_vic_read(offset, size, val);
	return val;
	}

	static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data,
	unsigned size)
	{
	AspeedVICState s = (AspeedVICState )opaque;
	hwaddr n_offset;
	bool high;

	if (offset < AVIC_NEW_BASE_OFFSET) {
	high = false;
	n_offset = offset;
	} else {
	high = !!(offset & 0x4);
	n_offset = (offset & ~0x4);
	}

	trace_aspeed_vic_write(offset, size, data);

	/* Given we have members using separate enable/clear registers, deposit64()
	* isn't quite the tool for the job. Instead, relocate the incoming bits to
	* the required bit offset based on the provided access address
	*/
	if (high) {
	data &= AVIC_H_MASK;
	data <<= 32;
	} else {
	data &= AVIC_L_MASK;
	}

	switch (n_offset) {
	case 0x98: /* Interrupt Selection */
	case 0x0c:
	/* Register has deposit64() semantics - overwrite requested 32 bits */
	if (high) {
	s->select &= AVIC_L_MASK;
	} else {
	s->select &= ((uint64_t) AVIC_H_MASK) << 32;
	}
	s->select \|= data;
	break;
	case 0xa0: /* Interrupt Enable */
	case 0x10:
	s->enable \|= data;
	break;
	case 0xa8: /* Interrupt Enable Clear */
	case 0x14:
	s->enable &= ~data;
	break;
	case 0xb0: /* Software Interrupt */
	case 0x18:
	qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. "
	"IRQs requested: 0x%016" PRIx64 "\n", __func__, data);
	break;
	case 0xb8: /* Software Interrupt Clear */
	case 0x1c:
	qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. "
	"IRQs to be cleared: 0x%016" PRIx64 "\n", __func__, data);
	break;
	case 0xd0: /* Interrupt Event */
	/* Register has deposit64() semantics - overwrite the top four valid
	* IRQ bits, as only the top four IRQs (GPIOs) can change their event
	* type */
	if (high) {
	s->event &= ~AVIC_EVENT_W_MASK;
	s->event \|= (data & AVIC_EVENT_W_MASK);
	} else {
	qemu_log_mask(LOG_GUEST_ERROR,
	"Ignoring invalid write to interrupt event register");
	}
	break;
	case 0xd8: /* Edge Triggered Interrupt Clear */
	case 0x38:
	s->raw &= ~(data & ~s->sense);
	break;
	case 0x80: /* IRQ Status */
	case 0x00:
	case 0x88: /* FIQ Status */
	case 0x04:
	case 0x90: /* Raw Interrupt Status */
	case 0x08:
	case 0xc0: /* Interrupt Sensitivity */
	case 0x24:
	case 0xc8: /* Interrupt Both Edge Trigger Control */
	case 0x28:
	case 0xe0: /* Edge Triggered Interrupt Status */
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Write of read-only register with offset 0x%"
	HWADDR_PRIx "\n", __func__, offset);
	break;

	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Bad register at offset 0x%" HWADDR_PRIx "\n",
	__func__, offset);
	break;
	}
	aspeed_vic_update(s);
	}

	static const MemoryRegionOps aspeed_vic_ops = {
	.read = aspeed_vic_read,
	.write = aspeed_vic_write,
	.endianness = DEVICE_LITTLE_ENDIAN,
	.valid.min_access_size = 4,
	.valid.max_access_size = 4,
	.valid.unaligned = false,
	};

	static void aspeed_vic_reset(DeviceState *dev)
	{
	AspeedVICState *s = ASPEED_VIC(dev);

	s->level = 0;
	s->raw = 0;
	s->select = 0;
	s->enable = 0;
	s->trigger = 0;
	s->sense = 0x1F07FFF8FFFFULL;
	s->dual_edge = 0xF800070000ULL;
	s->event = 0x5F07FFF8FFFFULL;
	}

	#define AVIC_IO_REGION_SIZE 0x20000

	static void aspeed_vic_realize(DeviceState dev, Error *errp)
	{
	SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
	AspeedVICState *s = ASPEED_VIC(dev);

	memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_vic_ops, s,
	TYPE_ASPEED_VIC, AVIC_IO_REGION_SIZE);

	sysbus_init_mmio(sbd, &s->iomem);

	qdev_init_gpio_in(dev, aspeed_vic_set_irq, ASPEED_VIC_NR_IRQS);
	sysbus_init_irq(sbd, &s->irq);
	sysbus_init_irq(sbd, &s->fiq);
	}

	static const VMStateDescription vmstate_aspeed_vic = {
	.name = "aspeed.new-vic",
	.version_id = 1,
	.minimum_version_id = 1,
	.fields = (VMStateField[]) {
	VMSTATE_UINT64(level, AspeedVICState),
	VMSTATE_UINT64(raw, AspeedVICState),
	VMSTATE_UINT64(select, AspeedVICState),
	VMSTATE_UINT64(enable, AspeedVICState),
	VMSTATE_UINT64(trigger, AspeedVICState),
	VMSTATE_UINT64(sense, AspeedVICState),
	VMSTATE_UINT64(dual_edge, AspeedVICState),
	VMSTATE_UINT64(event, AspeedVICState),
	VMSTATE_END_OF_LIST()
	}
	};

	static void aspeed_vic_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);
	dc->realize = aspeed_vic_realize;
	dc->reset = aspeed_vic_reset;
	dc->desc = "ASPEED Interrupt Controller (New)";
	dc->vmsd = &vmstate_aspeed_vic;
	}

	static const TypeInfo aspeed_vic_info = {
	.name = TYPE_ASPEED_VIC,
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(AspeedVICState),
	.class_init = aspeed_vic_class_init,
	};

	static void aspeed_vic_register_types(void)
	{
	type_register_static(&aspeed_vic_info);
	}

	type_init(aspeed_vic_register_types);