|  | /* | 
|  | * gdb server stub | 
|  | * | 
|  | * This implements a subset of the remote protocol as described in: | 
|  | * | 
|  | *   https://sourceware.org/gdb/onlinedocs/gdb/Remote-Protocol.html | 
|  | * | 
|  | * Copyright (c) 2003-2005 Fabrice Bellard | 
|  | * | 
|  | * This library is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU Lesser General Public | 
|  | * License as published by the Free Software Foundation; either | 
|  | * version 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * This library is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * Lesser General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU Lesser General Public | 
|  | * License along with this library; if not, see <http://www.gnu.org/licenses/>. | 
|  | * | 
|  | * SPDX-License-Identifier: LGPL-2.0+ | 
|  | */ | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  | #include "qemu/ctype.h" | 
|  | #include "qemu/cutils.h" | 
|  | #include "qemu/module.h" | 
|  | #include "qemu/error-report.h" | 
|  | #include "trace.h" | 
|  | #include "exec/gdbstub.h" | 
|  | #include "gdbstub/syscalls.h" | 
|  | #ifdef CONFIG_USER_ONLY | 
|  | #include "gdbstub/user.h" | 
|  | #else | 
|  | #include "hw/cpu/cluster.h" | 
|  | #include "hw/boards.h" | 
|  | #endif | 
|  |  | 
|  | #include "sysemu/hw_accel.h" | 
|  | #include "sysemu/runstate.h" | 
|  | #include "exec/replay-core.h" | 
|  | #include "exec/hwaddr.h" | 
|  |  | 
|  | #include "internals.h" | 
|  |  | 
|  | typedef struct GDBRegisterState { | 
|  | int base_reg; | 
|  | int num_regs; | 
|  | gdb_get_reg_cb get_reg; | 
|  | gdb_set_reg_cb set_reg; | 
|  | const char *xml; | 
|  | } GDBRegisterState; | 
|  |  | 
|  | GDBState gdbserver_state; | 
|  |  | 
|  | void gdb_init_gdbserver_state(void) | 
|  | { | 
|  | g_assert(!gdbserver_state.init); | 
|  | memset(&gdbserver_state, 0, sizeof(GDBState)); | 
|  | gdbserver_state.init = true; | 
|  | gdbserver_state.str_buf = g_string_new(NULL); | 
|  | gdbserver_state.mem_buf = g_byte_array_sized_new(MAX_PACKET_LENGTH); | 
|  | gdbserver_state.last_packet = g_byte_array_sized_new(MAX_PACKET_LENGTH + 4); | 
|  |  | 
|  | /* | 
|  | * What single-step modes are supported is accelerator dependent. | 
|  | * By default try to use no IRQs and no timers while single | 
|  | * stepping so as to make single stepping like a typical ICE HW step. | 
|  | */ | 
|  | gdbserver_state.supported_sstep_flags = accel_supported_gdbstub_sstep_flags(); | 
|  | gdbserver_state.sstep_flags = SSTEP_ENABLE | SSTEP_NOIRQ | SSTEP_NOTIMER; | 
|  | gdbserver_state.sstep_flags &= gdbserver_state.supported_sstep_flags; | 
|  | } | 
|  |  | 
|  | /* writes 2*len+1 bytes in buf */ | 
|  | void gdb_memtohex(GString *buf, const uint8_t *mem, int len) | 
|  | { | 
|  | int i, c; | 
|  | for(i = 0; i < len; i++) { | 
|  | c = mem[i]; | 
|  | g_string_append_c(buf, tohex(c >> 4)); | 
|  | g_string_append_c(buf, tohex(c & 0xf)); | 
|  | } | 
|  | g_string_append_c(buf, '\0'); | 
|  | } | 
|  |  | 
|  | void gdb_hextomem(GByteArray *mem, const char *buf, int len) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for(i = 0; i < len; i++) { | 
|  | guint8 byte = fromhex(buf[0]) << 4 | fromhex(buf[1]); | 
|  | g_byte_array_append(mem, &byte, 1); | 
|  | buf += 2; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hexdump(const char *buf, int len, | 
|  | void (*trace_fn)(size_t ofs, char const *text)) | 
|  | { | 
|  | char line_buffer[3 * 16 + 4 + 16 + 1]; | 
|  |  | 
|  | size_t i; | 
|  | for (i = 0; i < len || (i & 0xF); ++i) { | 
|  | size_t byte_ofs = i & 15; | 
|  |  | 
|  | if (byte_ofs == 0) { | 
|  | memset(line_buffer, ' ', 3 * 16 + 4 + 16); | 
|  | line_buffer[3 * 16 + 4 + 16] = 0; | 
|  | } | 
|  |  | 
|  | size_t col_group = (i >> 2) & 3; | 
|  | size_t hex_col = byte_ofs * 3 + col_group; | 
|  | size_t txt_col = 3 * 16 + 4 + byte_ofs; | 
|  |  | 
|  | if (i < len) { | 
|  | char value = buf[i]; | 
|  |  | 
|  | line_buffer[hex_col + 0] = tohex((value >> 4) & 0xF); | 
|  | line_buffer[hex_col + 1] = tohex((value >> 0) & 0xF); | 
|  | line_buffer[txt_col + 0] = (value >= ' ' && value < 127) | 
|  | ? value | 
|  | : '.'; | 
|  | } | 
|  |  | 
|  | if (byte_ofs == 0xF) | 
|  | trace_fn(i & -16, line_buffer); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* return -1 if error, 0 if OK */ | 
|  | int gdb_put_packet_binary(const char *buf, int len, bool dump) | 
|  | { | 
|  | int csum, i; | 
|  | uint8_t footer[3]; | 
|  |  | 
|  | if (dump && trace_event_get_state_backends(TRACE_GDBSTUB_IO_BINARYREPLY)) { | 
|  | hexdump(buf, len, trace_gdbstub_io_binaryreply); | 
|  | } | 
|  |  | 
|  | for(;;) { | 
|  | g_byte_array_set_size(gdbserver_state.last_packet, 0); | 
|  | g_byte_array_append(gdbserver_state.last_packet, | 
|  | (const uint8_t *) "$", 1); | 
|  | g_byte_array_append(gdbserver_state.last_packet, | 
|  | (const uint8_t *) buf, len); | 
|  | csum = 0; | 
|  | for(i = 0; i < len; i++) { | 
|  | csum += buf[i]; | 
|  | } | 
|  | footer[0] = '#'; | 
|  | footer[1] = tohex((csum >> 4) & 0xf); | 
|  | footer[2] = tohex((csum) & 0xf); | 
|  | g_byte_array_append(gdbserver_state.last_packet, footer, 3); | 
|  |  | 
|  | gdb_put_buffer(gdbserver_state.last_packet->data, | 
|  | gdbserver_state.last_packet->len); | 
|  |  | 
|  | if (gdb_got_immediate_ack()) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* return -1 if error, 0 if OK */ | 
|  | int gdb_put_packet(const char *buf) | 
|  | { | 
|  | trace_gdbstub_io_reply(buf); | 
|  |  | 
|  | return gdb_put_packet_binary(buf, strlen(buf), false); | 
|  | } | 
|  |  | 
|  | void gdb_put_strbuf(void) | 
|  | { | 
|  | gdb_put_packet(gdbserver_state.str_buf->str); | 
|  | } | 
|  |  | 
|  | /* Encode data using the encoding for 'x' packets.  */ | 
|  | void gdb_memtox(GString *buf, const char *mem, int len) | 
|  | { | 
|  | char c; | 
|  |  | 
|  | while (len--) { | 
|  | c = *(mem++); | 
|  | switch (c) { | 
|  | case '#': case '$': case '*': case '}': | 
|  | g_string_append_c(buf, '}'); | 
|  | g_string_append_c(buf, c ^ 0x20); | 
|  | break; | 
|  | default: | 
|  | g_string_append_c(buf, c); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static uint32_t gdb_get_cpu_pid(CPUState *cpu) | 
|  | { | 
|  | #ifdef CONFIG_USER_ONLY | 
|  | return getpid(); | 
|  | #else | 
|  | if (cpu->cluster_index == UNASSIGNED_CLUSTER_INDEX) { | 
|  | /* Return the default process' PID */ | 
|  | int index = gdbserver_state.process_num - 1; | 
|  | return gdbserver_state.processes[index].pid; | 
|  | } | 
|  | return cpu->cluster_index + 1; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | GDBProcess *gdb_get_process(uint32_t pid) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (!pid) { | 
|  | /* 0 means any process, we take the first one */ | 
|  | return &gdbserver_state.processes[0]; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < gdbserver_state.process_num; i++) { | 
|  | if (gdbserver_state.processes[i].pid == pid) { | 
|  | return &gdbserver_state.processes[i]; | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static GDBProcess *gdb_get_cpu_process(CPUState *cpu) | 
|  | { | 
|  | return gdb_get_process(gdb_get_cpu_pid(cpu)); | 
|  | } | 
|  |  | 
|  | static CPUState *find_cpu(uint32_t thread_id) | 
|  | { | 
|  | CPUState *cpu; | 
|  |  | 
|  | CPU_FOREACH(cpu) { | 
|  | if (gdb_get_cpu_index(cpu) == thread_id) { | 
|  | return cpu; | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | CPUState *gdb_get_first_cpu_in_process(GDBProcess *process) | 
|  | { | 
|  | CPUState *cpu; | 
|  |  | 
|  | CPU_FOREACH(cpu) { | 
|  | if (gdb_get_cpu_pid(cpu) == process->pid) { | 
|  | return cpu; | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static CPUState *gdb_next_cpu_in_process(CPUState *cpu) | 
|  | { | 
|  | uint32_t pid = gdb_get_cpu_pid(cpu); | 
|  | cpu = CPU_NEXT(cpu); | 
|  |  | 
|  | while (cpu) { | 
|  | if (gdb_get_cpu_pid(cpu) == pid) { | 
|  | break; | 
|  | } | 
|  |  | 
|  | cpu = CPU_NEXT(cpu); | 
|  | } | 
|  |  | 
|  | return cpu; | 
|  | } | 
|  |  | 
|  | /* Return the cpu following @cpu, while ignoring unattached processes. */ | 
|  | static CPUState *gdb_next_attached_cpu(CPUState *cpu) | 
|  | { | 
|  | cpu = CPU_NEXT(cpu); | 
|  |  | 
|  | while (cpu) { | 
|  | if (gdb_get_cpu_process(cpu)->attached) { | 
|  | break; | 
|  | } | 
|  |  | 
|  | cpu = CPU_NEXT(cpu); | 
|  | } | 
|  |  | 
|  | return cpu; | 
|  | } | 
|  |  | 
|  | /* Return the first attached cpu */ | 
|  | CPUState *gdb_first_attached_cpu(void) | 
|  | { | 
|  | CPUState *cpu = first_cpu; | 
|  | GDBProcess *process = gdb_get_cpu_process(cpu); | 
|  |  | 
|  | if (!process->attached) { | 
|  | return gdb_next_attached_cpu(cpu); | 
|  | } | 
|  |  | 
|  | return cpu; | 
|  | } | 
|  |  | 
|  | static CPUState *gdb_get_cpu(uint32_t pid, uint32_t tid) | 
|  | { | 
|  | GDBProcess *process; | 
|  | CPUState *cpu; | 
|  |  | 
|  | if (!pid && !tid) { | 
|  | /* 0 means any process/thread, we take the first attached one */ | 
|  | return gdb_first_attached_cpu(); | 
|  | } else if (pid && !tid) { | 
|  | /* any thread in a specific process */ | 
|  | process = gdb_get_process(pid); | 
|  |  | 
|  | if (process == NULL) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (!process->attached) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return gdb_get_first_cpu_in_process(process); | 
|  | } else { | 
|  | /* a specific thread */ | 
|  | cpu = find_cpu(tid); | 
|  |  | 
|  | if (cpu == NULL) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | process = gdb_get_cpu_process(cpu); | 
|  |  | 
|  | if (pid && process->pid != pid) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (!process->attached) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return cpu; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const char *get_feature_xml(const char *p, const char **newp, | 
|  | GDBProcess *process) | 
|  | { | 
|  | CPUState *cpu = gdb_get_first_cpu_in_process(process); | 
|  | CPUClass *cc = CPU_GET_CLASS(cpu); | 
|  | size_t len; | 
|  |  | 
|  | /* | 
|  | * qXfer:features:read:ANNEX:OFFSET,LENGTH' | 
|  | *                     ^p    ^newp | 
|  | */ | 
|  | char *term = strchr(p, ':'); | 
|  | *newp = term + 1; | 
|  | len = term - p; | 
|  |  | 
|  | /* Is it the main target xml? */ | 
|  | if (strncmp(p, "target.xml", len) == 0) { | 
|  | if (!process->target_xml) { | 
|  | GDBRegisterState *r; | 
|  | g_autoptr(GPtrArray) xml = g_ptr_array_new_with_free_func(g_free); | 
|  |  | 
|  | g_ptr_array_add( | 
|  | xml, | 
|  | g_strdup("<?xml version=\"1.0\"?>" | 
|  | "<!DOCTYPE target SYSTEM \"gdb-target.dtd\">" | 
|  | "<target>")); | 
|  |  | 
|  | if (cc->gdb_arch_name) { | 
|  | g_ptr_array_add( | 
|  | xml, | 
|  | g_markup_printf_escaped("<architecture>%s</architecture>", | 
|  | cc->gdb_arch_name(cpu))); | 
|  | } | 
|  | g_ptr_array_add( | 
|  | xml, | 
|  | g_markup_printf_escaped("<xi:include href=\"%s\"/>", | 
|  | cc->gdb_core_xml_file)); | 
|  | for (guint i = 0; i < cpu->gdb_regs->len; i++) { | 
|  | r = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); | 
|  | g_ptr_array_add( | 
|  | xml, | 
|  | g_markup_printf_escaped("<xi:include href=\"%s\"/>", | 
|  | r->xml)); | 
|  | } | 
|  | g_ptr_array_add(xml, g_strdup("</target>")); | 
|  | g_ptr_array_add(xml, NULL); | 
|  |  | 
|  | process->target_xml = g_strjoinv(NULL, (void *)xml->pdata); | 
|  | } | 
|  | return process->target_xml; | 
|  | } | 
|  | /* Is it dynamically generated by the target? */ | 
|  | if (cc->gdb_get_dynamic_xml) { | 
|  | g_autofree char *xmlname = g_strndup(p, len); | 
|  | const char *xml = cc->gdb_get_dynamic_xml(cpu, xmlname); | 
|  | if (xml) { | 
|  | return xml; | 
|  | } | 
|  | } | 
|  | /* Is it one of the encoded gdb-xml/ files? */ | 
|  | for (int i = 0; gdb_static_features[i].xmlname; i++) { | 
|  | const char *name = gdb_static_features[i].xmlname; | 
|  | if ((strncmp(name, p, len) == 0) && | 
|  | strlen(name) == len) { | 
|  | return gdb_static_features[i].xml; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* failed */ | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int gdb_read_register(CPUState *cpu, GByteArray *buf, int reg) | 
|  | { | 
|  | CPUClass *cc = CPU_GET_CLASS(cpu); | 
|  | CPUArchState *env = cpu_env(cpu); | 
|  | GDBRegisterState *r; | 
|  |  | 
|  | if (reg < cc->gdb_num_core_regs) { | 
|  | return cc->gdb_read_register(cpu, buf, reg); | 
|  | } | 
|  |  | 
|  | for (guint i = 0; i < cpu->gdb_regs->len; i++) { | 
|  | r = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); | 
|  | if (r->base_reg <= reg && reg < r->base_reg + r->num_regs) { | 
|  | return r->get_reg(env, buf, reg - r->base_reg); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gdb_write_register(CPUState *cpu, uint8_t *mem_buf, int reg) | 
|  | { | 
|  | CPUClass *cc = CPU_GET_CLASS(cpu); | 
|  | CPUArchState *env = cpu_env(cpu); | 
|  | GDBRegisterState *r; | 
|  |  | 
|  | if (reg < cc->gdb_num_core_regs) { | 
|  | return cc->gdb_write_register(cpu, mem_buf, reg); | 
|  | } | 
|  |  | 
|  | for (guint i = 0; i < cpu->gdb_regs->len; i++) { | 
|  | r =  &g_array_index(cpu->gdb_regs, GDBRegisterState, i); | 
|  | if (r->base_reg <= reg && reg < r->base_reg + r->num_regs) { | 
|  | return r->set_reg(env, mem_buf, reg - r->base_reg); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void gdb_register_coprocessor(CPUState *cpu, | 
|  | gdb_get_reg_cb get_reg, gdb_set_reg_cb set_reg, | 
|  | int num_regs, const char *xml, int g_pos) | 
|  | { | 
|  | GDBRegisterState *s; | 
|  | guint i; | 
|  |  | 
|  | if (cpu->gdb_regs) { | 
|  | for (i = 0; i < cpu->gdb_regs->len; i++) { | 
|  | /* Check for duplicates.  */ | 
|  | s = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); | 
|  | if (strcmp(s->xml, xml) == 0) { | 
|  | return; | 
|  | } | 
|  | } | 
|  | } else { | 
|  | cpu->gdb_regs = g_array_new(false, false, sizeof(GDBRegisterState)); | 
|  | i = 0; | 
|  | } | 
|  |  | 
|  | g_array_set_size(cpu->gdb_regs, i + 1); | 
|  | s = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); | 
|  | s->base_reg = cpu->gdb_num_regs; | 
|  | s->num_regs = num_regs; | 
|  | s->get_reg = get_reg; | 
|  | s->set_reg = set_reg; | 
|  | s->xml = xml; | 
|  |  | 
|  | /* Add to end of list.  */ | 
|  | cpu->gdb_num_regs += num_regs; | 
|  | if (g_pos) { | 
|  | if (g_pos != s->base_reg) { | 
|  | error_report("Error: Bad gdb register numbering for '%s', " | 
|  | "expected %d got %d", xml, g_pos, s->base_reg); | 
|  | } else { | 
|  | cpu->gdb_num_g_regs = cpu->gdb_num_regs; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void gdb_process_breakpoint_remove_all(GDBProcess *p) | 
|  | { | 
|  | CPUState *cpu = gdb_get_first_cpu_in_process(p); | 
|  |  | 
|  | while (cpu) { | 
|  | gdb_breakpoint_remove_all(cpu); | 
|  | cpu = gdb_next_cpu_in_process(cpu); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void gdb_set_cpu_pc(vaddr pc) | 
|  | { | 
|  | CPUState *cpu = gdbserver_state.c_cpu; | 
|  |  | 
|  | cpu_synchronize_state(cpu); | 
|  | cpu_set_pc(cpu, pc); | 
|  | } | 
|  |  | 
|  | void gdb_append_thread_id(CPUState *cpu, GString *buf) | 
|  | { | 
|  | if (gdbserver_state.multiprocess) { | 
|  | g_string_append_printf(buf, "p%02x.%02x", | 
|  | gdb_get_cpu_pid(cpu), gdb_get_cpu_index(cpu)); | 
|  | } else { | 
|  | g_string_append_printf(buf, "%02x", gdb_get_cpu_index(cpu)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static GDBThreadIdKind read_thread_id(const char *buf, const char **end_buf, | 
|  | uint32_t *pid, uint32_t *tid) | 
|  | { | 
|  | unsigned long p, t; | 
|  | int ret; | 
|  |  | 
|  | if (*buf == 'p') { | 
|  | buf++; | 
|  | ret = qemu_strtoul(buf, &buf, 16, &p); | 
|  |  | 
|  | if (ret) { | 
|  | return GDB_READ_THREAD_ERR; | 
|  | } | 
|  |  | 
|  | /* Skip '.' */ | 
|  | buf++; | 
|  | } else { | 
|  | p = 0; | 
|  | } | 
|  |  | 
|  | ret = qemu_strtoul(buf, &buf, 16, &t); | 
|  |  | 
|  | if (ret) { | 
|  | return GDB_READ_THREAD_ERR; | 
|  | } | 
|  |  | 
|  | *end_buf = buf; | 
|  |  | 
|  | if (p == -1) { | 
|  | return GDB_ALL_PROCESSES; | 
|  | } | 
|  |  | 
|  | if (pid) { | 
|  | *pid = p; | 
|  | } | 
|  |  | 
|  | if (t == -1) { | 
|  | return GDB_ALL_THREADS; | 
|  | } | 
|  |  | 
|  | if (tid) { | 
|  | *tid = t; | 
|  | } | 
|  |  | 
|  | return GDB_ONE_THREAD; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gdb_handle_vcont - Parses and handles a vCont packet. | 
|  | * returns -ENOTSUP if a command is unsupported, -EINVAL or -ERANGE if there is | 
|  | *         a format error, 0 on success. | 
|  | */ | 
|  | static int gdb_handle_vcont(const char *p) | 
|  | { | 
|  | int res, signal = 0; | 
|  | char cur_action; | 
|  | unsigned long tmp; | 
|  | uint32_t pid, tid; | 
|  | GDBProcess *process; | 
|  | CPUState *cpu; | 
|  | GDBThreadIdKind kind; | 
|  | unsigned int max_cpus = gdb_get_max_cpus(); | 
|  | /* uninitialised CPUs stay 0 */ | 
|  | g_autofree char *newstates = g_new0(char, max_cpus); | 
|  |  | 
|  | /* mark valid CPUs with 1 */ | 
|  | CPU_FOREACH(cpu) { | 
|  | newstates[cpu->cpu_index] = 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * res keeps track of what error we are returning, with -ENOTSUP meaning | 
|  | * that the command is unknown or unsupported, thus returning an empty | 
|  | * packet, while -EINVAL and -ERANGE cause an E22 packet, due to invalid, | 
|  | *  or incorrect parameters passed. | 
|  | */ | 
|  | res = 0; | 
|  |  | 
|  | /* | 
|  | * target_count and last_target keep track of how many CPUs we are going to | 
|  | * step or resume, and a pointer to the state structure of one of them, | 
|  | * respectivelly | 
|  | */ | 
|  | int target_count = 0; | 
|  | CPUState *last_target = NULL; | 
|  |  | 
|  | while (*p) { | 
|  | if (*p++ != ';') { | 
|  | return -ENOTSUP; | 
|  | } | 
|  |  | 
|  | cur_action = *p++; | 
|  | if (cur_action == 'C' || cur_action == 'S') { | 
|  | cur_action = qemu_tolower(cur_action); | 
|  | res = qemu_strtoul(p, &p, 16, &tmp); | 
|  | if (res) { | 
|  | return res; | 
|  | } | 
|  | signal = gdb_signal_to_target(tmp); | 
|  | } else if (cur_action != 'c' && cur_action != 's') { | 
|  | /* unknown/invalid/unsupported command */ | 
|  | return -ENOTSUP; | 
|  | } | 
|  |  | 
|  | if (*p == '\0' || *p == ';') { | 
|  | /* | 
|  | * No thread specifier, action is on "all threads". The | 
|  | * specification is unclear regarding the process to act on. We | 
|  | * choose all processes. | 
|  | */ | 
|  | kind = GDB_ALL_PROCESSES; | 
|  | } else if (*p++ == ':') { | 
|  | kind = read_thread_id(p, &p, &pid, &tid); | 
|  | } else { | 
|  | return -ENOTSUP; | 
|  | } | 
|  |  | 
|  | switch (kind) { | 
|  | case GDB_READ_THREAD_ERR: | 
|  | return -EINVAL; | 
|  |  | 
|  | case GDB_ALL_PROCESSES: | 
|  | cpu = gdb_first_attached_cpu(); | 
|  | while (cpu) { | 
|  | if (newstates[cpu->cpu_index] == 1) { | 
|  | newstates[cpu->cpu_index] = cur_action; | 
|  |  | 
|  | target_count++; | 
|  | last_target = cpu; | 
|  | } | 
|  |  | 
|  | cpu = gdb_next_attached_cpu(cpu); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case GDB_ALL_THREADS: | 
|  | process = gdb_get_process(pid); | 
|  |  | 
|  | if (!process->attached) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | cpu = gdb_get_first_cpu_in_process(process); | 
|  | while (cpu) { | 
|  | if (newstates[cpu->cpu_index] == 1) { | 
|  | newstates[cpu->cpu_index] = cur_action; | 
|  |  | 
|  | target_count++; | 
|  | last_target = cpu; | 
|  | } | 
|  |  | 
|  | cpu = gdb_next_cpu_in_process(cpu); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case GDB_ONE_THREAD: | 
|  | cpu = gdb_get_cpu(pid, tid); | 
|  |  | 
|  | /* invalid CPU/thread specified */ | 
|  | if (!cpu) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* only use if no previous match occourred */ | 
|  | if (newstates[cpu->cpu_index] == 1) { | 
|  | newstates[cpu->cpu_index] = cur_action; | 
|  |  | 
|  | target_count++; | 
|  | last_target = cpu; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * if we're about to resume a specific set of CPUs/threads, make it so that | 
|  | * in case execution gets interrupted, we can send GDB a stop reply with a | 
|  | * correct value. it doesn't really matter which CPU we tell GDB the signal | 
|  | * happened in (VM pauses stop all of them anyway), so long as it is one of | 
|  | * the ones we resumed/single stepped here. | 
|  | */ | 
|  | if (target_count > 0) { | 
|  | gdbserver_state.c_cpu = last_target; | 
|  | } | 
|  |  | 
|  | gdbserver_state.signal = signal; | 
|  | gdb_continue_partial(newstates); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static const char *cmd_next_param(const char *param, const char delimiter) | 
|  | { | 
|  | static const char all_delimiters[] = ",;:="; | 
|  | char curr_delimiters[2] = {0}; | 
|  | const char *delimiters; | 
|  |  | 
|  | if (delimiter == '?') { | 
|  | delimiters = all_delimiters; | 
|  | } else if (delimiter == '0') { | 
|  | return strchr(param, '\0'); | 
|  | } else if (delimiter == '.' && *param) { | 
|  | return param + 1; | 
|  | } else { | 
|  | curr_delimiters[0] = delimiter; | 
|  | delimiters = curr_delimiters; | 
|  | } | 
|  |  | 
|  | param += strcspn(param, delimiters); | 
|  | if (*param) { | 
|  | param++; | 
|  | } | 
|  | return param; | 
|  | } | 
|  |  | 
|  | static int cmd_parse_params(const char *data, const char *schema, | 
|  | GArray *params) | 
|  | { | 
|  | const char *curr_schema, *curr_data; | 
|  |  | 
|  | g_assert(schema); | 
|  | g_assert(params->len == 0); | 
|  |  | 
|  | curr_schema = schema; | 
|  | curr_data = data; | 
|  | while (curr_schema[0] && curr_schema[1] && *curr_data) { | 
|  | GdbCmdVariant this_param; | 
|  |  | 
|  | switch (curr_schema[0]) { | 
|  | case 'l': | 
|  | if (qemu_strtoul(curr_data, &curr_data, 16, | 
|  | &this_param.val_ul)) { | 
|  | return -EINVAL; | 
|  | } | 
|  | curr_data = cmd_next_param(curr_data, curr_schema[1]); | 
|  | g_array_append_val(params, this_param); | 
|  | break; | 
|  | case 'L': | 
|  | if (qemu_strtou64(curr_data, &curr_data, 16, | 
|  | (uint64_t *)&this_param.val_ull)) { | 
|  | return -EINVAL; | 
|  | } | 
|  | curr_data = cmd_next_param(curr_data, curr_schema[1]); | 
|  | g_array_append_val(params, this_param); | 
|  | break; | 
|  | case 's': | 
|  | this_param.data = curr_data; | 
|  | curr_data = cmd_next_param(curr_data, curr_schema[1]); | 
|  | g_array_append_val(params, this_param); | 
|  | break; | 
|  | case 'o': | 
|  | this_param.opcode = *(uint8_t *)curr_data; | 
|  | curr_data = cmd_next_param(curr_data, curr_schema[1]); | 
|  | g_array_append_val(params, this_param); | 
|  | break; | 
|  | case 't': | 
|  | this_param.thread_id.kind = | 
|  | read_thread_id(curr_data, &curr_data, | 
|  | &this_param.thread_id.pid, | 
|  | &this_param.thread_id.tid); | 
|  | curr_data = cmd_next_param(curr_data, curr_schema[1]); | 
|  | g_array_append_val(params, this_param); | 
|  | break; | 
|  | case '?': | 
|  | curr_data = cmd_next_param(curr_data, curr_schema[1]); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | curr_schema += 2; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | typedef void (*GdbCmdHandler)(GArray *params, void *user_ctx); | 
|  |  | 
|  | /* | 
|  | * cmd_startswith -> cmd is compared using startswith | 
|  | * | 
|  | * allow_stop_reply -> true iff the gdbstub can respond to this command with a | 
|  | *   "stop reply" packet. The list of commands that accept such response is | 
|  | *   defined at the GDB Remote Serial Protocol documentation. see: | 
|  | *   https://sourceware.org/gdb/onlinedocs/gdb/Stop-Reply-Packets.html#Stop-Reply-Packets. | 
|  | * | 
|  | * schema definitions: | 
|  | * Each schema parameter entry consists of 2 chars, | 
|  | * the first char represents the parameter type handling | 
|  | * the second char represents the delimiter for the next parameter | 
|  | * | 
|  | * Currently supported schema types: | 
|  | * 'l' -> unsigned long (stored in .val_ul) | 
|  | * 'L' -> unsigned long long (stored in .val_ull) | 
|  | * 's' -> string (stored in .data) | 
|  | * 'o' -> single char (stored in .opcode) | 
|  | * 't' -> thread id (stored in .thread_id) | 
|  | * '?' -> skip according to delimiter | 
|  | * | 
|  | * Currently supported delimiters: | 
|  | * '?' -> Stop at any delimiter (",;:=\0") | 
|  | * '0' -> Stop at "\0" | 
|  | * '.' -> Skip 1 char unless reached "\0" | 
|  | * Any other value is treated as the delimiter value itself | 
|  | */ | 
|  | typedef struct GdbCmdParseEntry { | 
|  | GdbCmdHandler handler; | 
|  | const char *cmd; | 
|  | bool cmd_startswith; | 
|  | const char *schema; | 
|  | bool allow_stop_reply; | 
|  | } GdbCmdParseEntry; | 
|  |  | 
|  | static inline int startswith(const char *string, const char *pattern) | 
|  | { | 
|  | return !strncmp(string, pattern, strlen(pattern)); | 
|  | } | 
|  |  | 
|  | static int process_string_cmd(const char *data, | 
|  | const GdbCmdParseEntry *cmds, int num_cmds) | 
|  | { | 
|  | int i; | 
|  | g_autoptr(GArray) params = g_array_new(false, true, sizeof(GdbCmdVariant)); | 
|  |  | 
|  | if (!cmds) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < num_cmds; i++) { | 
|  | const GdbCmdParseEntry *cmd = &cmds[i]; | 
|  | g_assert(cmd->handler && cmd->cmd); | 
|  |  | 
|  | if ((cmd->cmd_startswith && !startswith(data, cmd->cmd)) || | 
|  | (!cmd->cmd_startswith && strcmp(cmd->cmd, data))) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (cmd->schema) { | 
|  | if (cmd_parse_params(&data[strlen(cmd->cmd)], | 
|  | cmd->schema, params)) { | 
|  | return -1; | 
|  | } | 
|  | } | 
|  |  | 
|  | gdbserver_state.allow_stop_reply = cmd->allow_stop_reply; | 
|  | cmd->handler(params, NULL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void run_cmd_parser(const char *data, const GdbCmdParseEntry *cmd) | 
|  | { | 
|  | if (!data) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | g_string_set_size(gdbserver_state.str_buf, 0); | 
|  | g_byte_array_set_size(gdbserver_state.mem_buf, 0); | 
|  |  | 
|  | /* In case there was an error during the command parsing we must | 
|  | * send a NULL packet to indicate the command is not supported */ | 
|  | if (process_string_cmd(data, cmd, 1)) { | 
|  | gdb_put_packet(""); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void handle_detach(GArray *params, void *user_ctx) | 
|  | { | 
|  | GDBProcess *process; | 
|  | uint32_t pid = 1; | 
|  |  | 
|  | if (gdbserver_state.multiprocess) { | 
|  | if (!params->len) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | pid = get_param(params, 0)->val_ul; | 
|  | } | 
|  |  | 
|  | process = gdb_get_process(pid); | 
|  | gdb_process_breakpoint_remove_all(process); | 
|  | process->attached = false; | 
|  |  | 
|  | if (pid == gdb_get_cpu_pid(gdbserver_state.c_cpu)) { | 
|  | gdbserver_state.c_cpu = gdb_first_attached_cpu(); | 
|  | } | 
|  |  | 
|  | if (pid == gdb_get_cpu_pid(gdbserver_state.g_cpu)) { | 
|  | gdbserver_state.g_cpu = gdb_first_attached_cpu(); | 
|  | } | 
|  |  | 
|  | if (!gdbserver_state.c_cpu) { | 
|  | /* No more process attached */ | 
|  | gdb_disable_syscalls(); | 
|  | gdb_continue(); | 
|  | } | 
|  | gdb_put_packet("OK"); | 
|  | } | 
|  |  | 
|  | static void handle_thread_alive(GArray *params, void *user_ctx) | 
|  | { | 
|  | CPUState *cpu; | 
|  |  | 
|  | if (!params->len) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (get_param(params, 0)->thread_id.kind == GDB_READ_THREAD_ERR) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | cpu = gdb_get_cpu(get_param(params, 0)->thread_id.pid, | 
|  | get_param(params, 0)->thread_id.tid); | 
|  | if (!cpu) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | gdb_put_packet("OK"); | 
|  | } | 
|  |  | 
|  | static void handle_continue(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (params->len) { | 
|  | gdb_set_cpu_pc(get_param(params, 0)->val_ull); | 
|  | } | 
|  |  | 
|  | gdbserver_state.signal = 0; | 
|  | gdb_continue(); | 
|  | } | 
|  |  | 
|  | static void handle_cont_with_sig(GArray *params, void *user_ctx) | 
|  | { | 
|  | unsigned long signal = 0; | 
|  |  | 
|  | /* | 
|  | * Note: C sig;[addr] is currently unsupported and we simply | 
|  | *       omit the addr parameter | 
|  | */ | 
|  | if (params->len) { | 
|  | signal = get_param(params, 0)->val_ul; | 
|  | } | 
|  |  | 
|  | gdbserver_state.signal = gdb_signal_to_target(signal); | 
|  | if (gdbserver_state.signal == -1) { | 
|  | gdbserver_state.signal = 0; | 
|  | } | 
|  | gdb_continue(); | 
|  | } | 
|  |  | 
|  | static void handle_set_thread(GArray *params, void *user_ctx) | 
|  | { | 
|  | CPUState *cpu; | 
|  |  | 
|  | if (params->len != 2) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (get_param(params, 1)->thread_id.kind == GDB_READ_THREAD_ERR) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (get_param(params, 1)->thread_id.kind != GDB_ONE_THREAD) { | 
|  | gdb_put_packet("OK"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | cpu = gdb_get_cpu(get_param(params, 1)->thread_id.pid, | 
|  | get_param(params, 1)->thread_id.tid); | 
|  | if (!cpu) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note: This command is deprecated and modern gdb's will be using the | 
|  | *       vCont command instead. | 
|  | */ | 
|  | switch (get_param(params, 0)->opcode) { | 
|  | case 'c': | 
|  | gdbserver_state.c_cpu = cpu; | 
|  | gdb_put_packet("OK"); | 
|  | break; | 
|  | case 'g': | 
|  | gdbserver_state.g_cpu = cpu; | 
|  | gdb_put_packet("OK"); | 
|  | break; | 
|  | default: | 
|  | gdb_put_packet("E22"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void handle_insert_bp(GArray *params, void *user_ctx) | 
|  | { | 
|  | int res; | 
|  |  | 
|  | if (params->len != 3) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | res = gdb_breakpoint_insert(gdbserver_state.c_cpu, | 
|  | get_param(params, 0)->val_ul, | 
|  | get_param(params, 1)->val_ull, | 
|  | get_param(params, 2)->val_ull); | 
|  | if (res >= 0) { | 
|  | gdb_put_packet("OK"); | 
|  | return; | 
|  | } else if (res == -ENOSYS) { | 
|  | gdb_put_packet(""); | 
|  | return; | 
|  | } | 
|  |  | 
|  | gdb_put_packet("E22"); | 
|  | } | 
|  |  | 
|  | static void handle_remove_bp(GArray *params, void *user_ctx) | 
|  | { | 
|  | int res; | 
|  |  | 
|  | if (params->len != 3) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | res = gdb_breakpoint_remove(gdbserver_state.c_cpu, | 
|  | get_param(params, 0)->val_ul, | 
|  | get_param(params, 1)->val_ull, | 
|  | get_param(params, 2)->val_ull); | 
|  | if (res >= 0) { | 
|  | gdb_put_packet("OK"); | 
|  | return; | 
|  | } else if (res == -ENOSYS) { | 
|  | gdb_put_packet(""); | 
|  | return; | 
|  | } | 
|  |  | 
|  | gdb_put_packet("E22"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * handle_set/get_reg | 
|  | * | 
|  | * Older gdb are really dumb, and don't use 'G/g' if 'P/p' is available. | 
|  | * This works, but can be very slow. Anything new enough to understand | 
|  | * XML also knows how to use this properly. However to use this we | 
|  | * need to define a local XML file as well as be talking to a | 
|  | * reasonably modern gdb. Responding with an empty packet will cause | 
|  | * the remote gdb to fallback to older methods. | 
|  | */ | 
|  |  | 
|  | static void handle_set_reg(GArray *params, void *user_ctx) | 
|  | { | 
|  | int reg_size; | 
|  |  | 
|  | if (params->len != 2) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | reg_size = strlen(get_param(params, 1)->data) / 2; | 
|  | gdb_hextomem(gdbserver_state.mem_buf, get_param(params, 1)->data, reg_size); | 
|  | gdb_write_register(gdbserver_state.g_cpu, gdbserver_state.mem_buf->data, | 
|  | get_param(params, 0)->val_ull); | 
|  | gdb_put_packet("OK"); | 
|  | } | 
|  |  | 
|  | static void handle_get_reg(GArray *params, void *user_ctx) | 
|  | { | 
|  | int reg_size; | 
|  |  | 
|  | if (!params->len) { | 
|  | gdb_put_packet("E14"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | reg_size = gdb_read_register(gdbserver_state.g_cpu, | 
|  | gdbserver_state.mem_buf, | 
|  | get_param(params, 0)->val_ull); | 
|  | if (!reg_size) { | 
|  | gdb_put_packet("E14"); | 
|  | return; | 
|  | } else { | 
|  | g_byte_array_set_size(gdbserver_state.mem_buf, reg_size); | 
|  | } | 
|  |  | 
|  | gdb_memtohex(gdbserver_state.str_buf, | 
|  | gdbserver_state.mem_buf->data, reg_size); | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  | static void handle_write_mem(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (params->len != 3) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* gdb_hextomem() reads 2*len bytes */ | 
|  | if (get_param(params, 1)->val_ull > | 
|  | strlen(get_param(params, 2)->data) / 2) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | gdb_hextomem(gdbserver_state.mem_buf, get_param(params, 2)->data, | 
|  | get_param(params, 1)->val_ull); | 
|  | if (gdb_target_memory_rw_debug(gdbserver_state.g_cpu, | 
|  | get_param(params, 0)->val_ull, | 
|  | gdbserver_state.mem_buf->data, | 
|  | gdbserver_state.mem_buf->len, true)) { | 
|  | gdb_put_packet("E14"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | gdb_put_packet("OK"); | 
|  | } | 
|  |  | 
|  | static void handle_read_mem(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (params->len != 2) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* gdb_memtohex() doubles the required space */ | 
|  | if (get_param(params, 1)->val_ull > MAX_PACKET_LENGTH / 2) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | g_byte_array_set_size(gdbserver_state.mem_buf, | 
|  | get_param(params, 1)->val_ull); | 
|  |  | 
|  | if (gdb_target_memory_rw_debug(gdbserver_state.g_cpu, | 
|  | get_param(params, 0)->val_ull, | 
|  | gdbserver_state.mem_buf->data, | 
|  | gdbserver_state.mem_buf->len, false)) { | 
|  | gdb_put_packet("E14"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | gdb_memtohex(gdbserver_state.str_buf, gdbserver_state.mem_buf->data, | 
|  | gdbserver_state.mem_buf->len); | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  | static void handle_write_all_regs(GArray *params, void *user_ctx) | 
|  | { | 
|  | int reg_id; | 
|  | size_t len; | 
|  | uint8_t *registers; | 
|  | int reg_size; | 
|  |  | 
|  | if (!params->len) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | cpu_synchronize_state(gdbserver_state.g_cpu); | 
|  | len = strlen(get_param(params, 0)->data) / 2; | 
|  | gdb_hextomem(gdbserver_state.mem_buf, get_param(params, 0)->data, len); | 
|  | registers = gdbserver_state.mem_buf->data; | 
|  | for (reg_id = 0; | 
|  | reg_id < gdbserver_state.g_cpu->gdb_num_g_regs && len > 0; | 
|  | reg_id++) { | 
|  | reg_size = gdb_write_register(gdbserver_state.g_cpu, registers, reg_id); | 
|  | len -= reg_size; | 
|  | registers += reg_size; | 
|  | } | 
|  | gdb_put_packet("OK"); | 
|  | } | 
|  |  | 
|  | static void handle_read_all_regs(GArray *params, void *user_ctx) | 
|  | { | 
|  | int reg_id; | 
|  | size_t len; | 
|  |  | 
|  | cpu_synchronize_state(gdbserver_state.g_cpu); | 
|  | g_byte_array_set_size(gdbserver_state.mem_buf, 0); | 
|  | len = 0; | 
|  | for (reg_id = 0; reg_id < gdbserver_state.g_cpu->gdb_num_g_regs; reg_id++) { | 
|  | len += gdb_read_register(gdbserver_state.g_cpu, | 
|  | gdbserver_state.mem_buf, | 
|  | reg_id); | 
|  | } | 
|  | g_assert(len == gdbserver_state.mem_buf->len); | 
|  |  | 
|  | gdb_memtohex(gdbserver_state.str_buf, gdbserver_state.mem_buf->data, len); | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void handle_step(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (params->len) { | 
|  | gdb_set_cpu_pc(get_param(params, 0)->val_ull); | 
|  | } | 
|  |  | 
|  | cpu_single_step(gdbserver_state.c_cpu, gdbserver_state.sstep_flags); | 
|  | gdb_continue(); | 
|  | } | 
|  |  | 
|  | static void handle_backward(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (!gdb_can_reverse()) { | 
|  | gdb_put_packet("E22"); | 
|  | } | 
|  | if (params->len == 1) { | 
|  | switch (get_param(params, 0)->opcode) { | 
|  | case 's': | 
|  | if (replay_reverse_step()) { | 
|  | gdb_continue(); | 
|  | } else { | 
|  | gdb_put_packet("E14"); | 
|  | } | 
|  | return; | 
|  | case 'c': | 
|  | if (replay_reverse_continue()) { | 
|  | gdb_continue(); | 
|  | } else { | 
|  | gdb_put_packet("E14"); | 
|  | } | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Default invalid command */ | 
|  | gdb_put_packet(""); | 
|  | } | 
|  |  | 
|  | static void handle_v_cont_query(GArray *params, void *user_ctx) | 
|  | { | 
|  | gdb_put_packet("vCont;c;C;s;S"); | 
|  | } | 
|  |  | 
|  | static void handle_v_cont(GArray *params, void *user_ctx) | 
|  | { | 
|  | int res; | 
|  |  | 
|  | if (!params->len) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | res = gdb_handle_vcont(get_param(params, 0)->data); | 
|  | if ((res == -EINVAL) || (res == -ERANGE)) { | 
|  | gdb_put_packet("E22"); | 
|  | } else if (res) { | 
|  | gdb_put_packet(""); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void handle_v_attach(GArray *params, void *user_ctx) | 
|  | { | 
|  | GDBProcess *process; | 
|  | CPUState *cpu; | 
|  |  | 
|  | g_string_assign(gdbserver_state.str_buf, "E22"); | 
|  | if (!params->len) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | process = gdb_get_process(get_param(params, 0)->val_ul); | 
|  | if (!process) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | cpu = gdb_get_first_cpu_in_process(process); | 
|  | if (!cpu) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | process->attached = true; | 
|  | gdbserver_state.g_cpu = cpu; | 
|  | gdbserver_state.c_cpu = cpu; | 
|  |  | 
|  | if (gdbserver_state.allow_stop_reply) { | 
|  | g_string_printf(gdbserver_state.str_buf, "T%02xthread:", GDB_SIGNAL_TRAP); | 
|  | gdb_append_thread_id(cpu, gdbserver_state.str_buf); | 
|  | g_string_append_c(gdbserver_state.str_buf, ';'); | 
|  | gdbserver_state.allow_stop_reply = false; | 
|  | cleanup: | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void handle_v_kill(GArray *params, void *user_ctx) | 
|  | { | 
|  | /* Kill the target */ | 
|  | gdb_put_packet("OK"); | 
|  | error_report("QEMU: Terminated via GDBstub"); | 
|  | gdb_exit(0); | 
|  | gdb_qemu_exit(0); | 
|  | } | 
|  |  | 
|  | static const GdbCmdParseEntry gdb_v_commands_table[] = { | 
|  | /* Order is important if has same prefix */ | 
|  | { | 
|  | .handler = handle_v_cont_query, | 
|  | .cmd = "Cont?", | 
|  | .cmd_startswith = 1 | 
|  | }, | 
|  | { | 
|  | .handler = handle_v_cont, | 
|  | .cmd = "Cont", | 
|  | .cmd_startswith = 1, | 
|  | .allow_stop_reply = true, | 
|  | .schema = "s0" | 
|  | }, | 
|  | { | 
|  | .handler = handle_v_attach, | 
|  | .cmd = "Attach;", | 
|  | .cmd_startswith = 1, | 
|  | .allow_stop_reply = true, | 
|  | .schema = "l0" | 
|  | }, | 
|  | { | 
|  | .handler = handle_v_kill, | 
|  | .cmd = "Kill;", | 
|  | .cmd_startswith = 1 | 
|  | }, | 
|  | #ifdef CONFIG_USER_ONLY | 
|  | /* | 
|  | * Host I/O Packets. See [1] for details. | 
|  | * [1] https://sourceware.org/gdb/onlinedocs/gdb/Host-I_002fO-Packets.html | 
|  | */ | 
|  | { | 
|  | .handler = gdb_handle_v_file_open, | 
|  | .cmd = "File:open:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s,L,L0" | 
|  | }, | 
|  | { | 
|  | .handler = gdb_handle_v_file_close, | 
|  | .cmd = "File:close:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l0" | 
|  | }, | 
|  | { | 
|  | .handler = gdb_handle_v_file_pread, | 
|  | .cmd = "File:pread:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l,L,L0" | 
|  | }, | 
|  | { | 
|  | .handler = gdb_handle_v_file_readlink, | 
|  | .cmd = "File:readlink:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s0" | 
|  | }, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static void handle_v_commands(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (!params->len) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (process_string_cmd(get_param(params, 0)->data, | 
|  | gdb_v_commands_table, | 
|  | ARRAY_SIZE(gdb_v_commands_table))) { | 
|  | gdb_put_packet(""); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void handle_query_qemu_sstepbits(GArray *params, void *user_ctx) | 
|  | { | 
|  | g_string_printf(gdbserver_state.str_buf, "ENABLE=%x", SSTEP_ENABLE); | 
|  |  | 
|  | if (gdbserver_state.supported_sstep_flags & SSTEP_NOIRQ) { | 
|  | g_string_append_printf(gdbserver_state.str_buf, ",NOIRQ=%x", | 
|  | SSTEP_NOIRQ); | 
|  | } | 
|  |  | 
|  | if (gdbserver_state.supported_sstep_flags & SSTEP_NOTIMER) { | 
|  | g_string_append_printf(gdbserver_state.str_buf, ",NOTIMER=%x", | 
|  | SSTEP_NOTIMER); | 
|  | } | 
|  |  | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  | static void handle_set_qemu_sstep(GArray *params, void *user_ctx) | 
|  | { | 
|  | int new_sstep_flags; | 
|  |  | 
|  | if (!params->len) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | new_sstep_flags = get_param(params, 0)->val_ul; | 
|  |  | 
|  | if (new_sstep_flags  & ~gdbserver_state.supported_sstep_flags) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | gdbserver_state.sstep_flags = new_sstep_flags; | 
|  | gdb_put_packet("OK"); | 
|  | } | 
|  |  | 
|  | static void handle_query_qemu_sstep(GArray *params, void *user_ctx) | 
|  | { | 
|  | g_string_printf(gdbserver_state.str_buf, "0x%x", | 
|  | gdbserver_state.sstep_flags); | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  | static void handle_query_curr_tid(GArray *params, void *user_ctx) | 
|  | { | 
|  | CPUState *cpu; | 
|  | GDBProcess *process; | 
|  |  | 
|  | /* | 
|  | * "Current thread" remains vague in the spec, so always return | 
|  | * the first thread of the current process (gdb returns the | 
|  | * first thread). | 
|  | */ | 
|  | process = gdb_get_cpu_process(gdbserver_state.g_cpu); | 
|  | cpu = gdb_get_first_cpu_in_process(process); | 
|  | g_string_assign(gdbserver_state.str_buf, "QC"); | 
|  | gdb_append_thread_id(cpu, gdbserver_state.str_buf); | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  | static void handle_query_threads(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (!gdbserver_state.query_cpu) { | 
|  | gdb_put_packet("l"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | g_string_assign(gdbserver_state.str_buf, "m"); | 
|  | gdb_append_thread_id(gdbserver_state.query_cpu, gdbserver_state.str_buf); | 
|  | gdb_put_strbuf(); | 
|  | gdbserver_state.query_cpu = gdb_next_attached_cpu(gdbserver_state.query_cpu); | 
|  | } | 
|  |  | 
|  | static void handle_query_first_threads(GArray *params, void *user_ctx) | 
|  | { | 
|  | gdbserver_state.query_cpu = gdb_first_attached_cpu(); | 
|  | handle_query_threads(params, user_ctx); | 
|  | } | 
|  |  | 
|  | static void handle_query_thread_extra(GArray *params, void *user_ctx) | 
|  | { | 
|  | g_autoptr(GString) rs = g_string_new(NULL); | 
|  | CPUState *cpu; | 
|  |  | 
|  | if (!params->len || | 
|  | get_param(params, 0)->thread_id.kind == GDB_READ_THREAD_ERR) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | cpu = gdb_get_cpu(get_param(params, 0)->thread_id.pid, | 
|  | get_param(params, 0)->thread_id.tid); | 
|  | if (!cpu) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | cpu_synchronize_state(cpu); | 
|  |  | 
|  | if (gdbserver_state.multiprocess && (gdbserver_state.process_num > 1)) { | 
|  | /* Print the CPU model and name in multiprocess mode */ | 
|  | ObjectClass *oc = object_get_class(OBJECT(cpu)); | 
|  | const char *cpu_model = object_class_get_name(oc); | 
|  | const char *cpu_name = | 
|  | object_get_canonical_path_component(OBJECT(cpu)); | 
|  | g_string_printf(rs, "%s %s [%s]", cpu_model, cpu_name, | 
|  | cpu->halted ? "halted " : "running"); | 
|  | } else { | 
|  | g_string_printf(rs, "CPU#%d [%s]", cpu->cpu_index, | 
|  | cpu->halted ? "halted " : "running"); | 
|  | } | 
|  | trace_gdbstub_op_extra_info(rs->str); | 
|  | gdb_memtohex(gdbserver_state.str_buf, (uint8_t *)rs->str, rs->len); | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  | static void handle_query_supported(GArray *params, void *user_ctx) | 
|  | { | 
|  | CPUClass *cc; | 
|  |  | 
|  | g_string_printf(gdbserver_state.str_buf, "PacketSize=%x", MAX_PACKET_LENGTH); | 
|  | cc = CPU_GET_CLASS(first_cpu); | 
|  | if (cc->gdb_core_xml_file) { | 
|  | g_string_append(gdbserver_state.str_buf, ";qXfer:features:read+"); | 
|  | } | 
|  |  | 
|  | if (gdb_can_reverse()) { | 
|  | g_string_append(gdbserver_state.str_buf, | 
|  | ";ReverseStep+;ReverseContinue+"); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_USER_ONLY) | 
|  | #if defined(CONFIG_LINUX) | 
|  | if (gdbserver_state.c_cpu->opaque) { | 
|  | g_string_append(gdbserver_state.str_buf, ";qXfer:auxv:read+"); | 
|  | } | 
|  | #endif | 
|  | g_string_append(gdbserver_state.str_buf, ";qXfer:exec-file:read+"); | 
|  | #endif | 
|  |  | 
|  | if (params->len && | 
|  | strstr(get_param(params, 0)->data, "multiprocess+")) { | 
|  | gdbserver_state.multiprocess = true; | 
|  | } | 
|  |  | 
|  | g_string_append(gdbserver_state.str_buf, ";vContSupported+;multiprocess+"); | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  | static void handle_query_xfer_features(GArray *params, void *user_ctx) | 
|  | { | 
|  | GDBProcess *process; | 
|  | CPUClass *cc; | 
|  | unsigned long len, total_len, addr; | 
|  | const char *xml; | 
|  | const char *p; | 
|  |  | 
|  | if (params->len < 3) { | 
|  | gdb_put_packet("E22"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | process = gdb_get_cpu_process(gdbserver_state.g_cpu); | 
|  | cc = CPU_GET_CLASS(gdbserver_state.g_cpu); | 
|  | if (!cc->gdb_core_xml_file) { | 
|  | gdb_put_packet(""); | 
|  | return; | 
|  | } | 
|  |  | 
|  | p = get_param(params, 0)->data; | 
|  | xml = get_feature_xml(p, &p, process); | 
|  | if (!xml) { | 
|  | gdb_put_packet("E00"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | addr = get_param(params, 1)->val_ul; | 
|  | len = get_param(params, 2)->val_ul; | 
|  | total_len = strlen(xml); | 
|  | if (addr > total_len) { | 
|  | gdb_put_packet("E00"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (len > (MAX_PACKET_LENGTH - 5) / 2) { | 
|  | len = (MAX_PACKET_LENGTH - 5) / 2; | 
|  | } | 
|  |  | 
|  | if (len < total_len - addr) { | 
|  | g_string_assign(gdbserver_state.str_buf, "m"); | 
|  | gdb_memtox(gdbserver_state.str_buf, xml + addr, len); | 
|  | } else { | 
|  | g_string_assign(gdbserver_state.str_buf, "l"); | 
|  | gdb_memtox(gdbserver_state.str_buf, xml + addr, total_len - addr); | 
|  | } | 
|  |  | 
|  | gdb_put_packet_binary(gdbserver_state.str_buf->str, | 
|  | gdbserver_state.str_buf->len, true); | 
|  | } | 
|  |  | 
|  | static void handle_query_qemu_supported(GArray *params, void *user_ctx) | 
|  | { | 
|  | g_string_printf(gdbserver_state.str_buf, "sstepbits;sstep"); | 
|  | #ifndef CONFIG_USER_ONLY | 
|  | g_string_append(gdbserver_state.str_buf, ";PhyMemMode"); | 
|  | #endif | 
|  | gdb_put_strbuf(); | 
|  | } | 
|  |  | 
|  | static const GdbCmdParseEntry gdb_gen_query_set_common_table[] = { | 
|  | /* Order is important if has same prefix */ | 
|  | { | 
|  | .handler = handle_query_qemu_sstepbits, | 
|  | .cmd = "qemu.sstepbits", | 
|  | }, | 
|  | { | 
|  | .handler = handle_query_qemu_sstep, | 
|  | .cmd = "qemu.sstep", | 
|  | }, | 
|  | { | 
|  | .handler = handle_set_qemu_sstep, | 
|  | .cmd = "qemu.sstep=", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l0" | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const GdbCmdParseEntry gdb_gen_query_table[] = { | 
|  | { | 
|  | .handler = handle_query_curr_tid, | 
|  | .cmd = "C", | 
|  | }, | 
|  | { | 
|  | .handler = handle_query_threads, | 
|  | .cmd = "sThreadInfo", | 
|  | }, | 
|  | { | 
|  | .handler = handle_query_first_threads, | 
|  | .cmd = "fThreadInfo", | 
|  | }, | 
|  | { | 
|  | .handler = handle_query_thread_extra, | 
|  | .cmd = "ThreadExtraInfo,", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "t0" | 
|  | }, | 
|  | #ifdef CONFIG_USER_ONLY | 
|  | { | 
|  | .handler = gdb_handle_query_offsets, | 
|  | .cmd = "Offsets", | 
|  | }, | 
|  | #else | 
|  | { | 
|  | .handler = gdb_handle_query_rcmd, | 
|  | .cmd = "Rcmd,", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s0" | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .handler = handle_query_supported, | 
|  | .cmd = "Supported:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s0" | 
|  | }, | 
|  | { | 
|  | .handler = handle_query_supported, | 
|  | .cmd = "Supported", | 
|  | .schema = "s0" | 
|  | }, | 
|  | { | 
|  | .handler = handle_query_xfer_features, | 
|  | .cmd = "Xfer:features:read:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s:l,l0" | 
|  | }, | 
|  | #if defined(CONFIG_USER_ONLY) | 
|  | #if defined(CONFIG_LINUX) | 
|  | { | 
|  | .handler = gdb_handle_query_xfer_auxv, | 
|  | .cmd = "Xfer:auxv:read::", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l,l0" | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .handler = gdb_handle_query_xfer_exec_file, | 
|  | .cmd = "Xfer:exec-file:read:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l:l,l0" | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .handler = gdb_handle_query_attached, | 
|  | .cmd = "Attached:", | 
|  | .cmd_startswith = 1 | 
|  | }, | 
|  | { | 
|  | .handler = gdb_handle_query_attached, | 
|  | .cmd = "Attached", | 
|  | }, | 
|  | { | 
|  | .handler = handle_query_qemu_supported, | 
|  | .cmd = "qemu.Supported", | 
|  | }, | 
|  | #ifndef CONFIG_USER_ONLY | 
|  | { | 
|  | .handler = gdb_handle_query_qemu_phy_mem_mode, | 
|  | .cmd = "qemu.PhyMemMode", | 
|  | }, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static const GdbCmdParseEntry gdb_gen_set_table[] = { | 
|  | /* Order is important if has same prefix */ | 
|  | { | 
|  | .handler = handle_set_qemu_sstep, | 
|  | .cmd = "qemu.sstep:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l0" | 
|  | }, | 
|  | #ifndef CONFIG_USER_ONLY | 
|  | { | 
|  | .handler = gdb_handle_set_qemu_phy_mem_mode, | 
|  | .cmd = "qemu.PhyMemMode:", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l0" | 
|  | }, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static void handle_gen_query(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (!params->len) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!process_string_cmd(get_param(params, 0)->data, | 
|  | gdb_gen_query_set_common_table, | 
|  | ARRAY_SIZE(gdb_gen_query_set_common_table))) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (process_string_cmd(get_param(params, 0)->data, | 
|  | gdb_gen_query_table, | 
|  | ARRAY_SIZE(gdb_gen_query_table))) { | 
|  | gdb_put_packet(""); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void handle_gen_set(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (!params->len) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!process_string_cmd(get_param(params, 0)->data, | 
|  | gdb_gen_query_set_common_table, | 
|  | ARRAY_SIZE(gdb_gen_query_set_common_table))) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (process_string_cmd(get_param(params, 0)->data, | 
|  | gdb_gen_set_table, | 
|  | ARRAY_SIZE(gdb_gen_set_table))) { | 
|  | gdb_put_packet(""); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void handle_target_halt(GArray *params, void *user_ctx) | 
|  | { | 
|  | if (gdbserver_state.allow_stop_reply) { | 
|  | g_string_printf(gdbserver_state.str_buf, "T%02xthread:", GDB_SIGNAL_TRAP); | 
|  | gdb_append_thread_id(gdbserver_state.c_cpu, gdbserver_state.str_buf); | 
|  | g_string_append_c(gdbserver_state.str_buf, ';'); | 
|  | gdb_put_strbuf(); | 
|  | gdbserver_state.allow_stop_reply = false; | 
|  | } | 
|  | /* | 
|  | * Remove all the breakpoints when this query is issued, | 
|  | * because gdb is doing an initial connect and the state | 
|  | * should be cleaned up. | 
|  | */ | 
|  | gdb_breakpoint_remove_all(gdbserver_state.c_cpu); | 
|  | } | 
|  |  | 
|  | static int gdb_handle_packet(const char *line_buf) | 
|  | { | 
|  | const GdbCmdParseEntry *cmd_parser = NULL; | 
|  |  | 
|  | trace_gdbstub_io_command(line_buf); | 
|  |  | 
|  | switch (line_buf[0]) { | 
|  | case '!': | 
|  | gdb_put_packet("OK"); | 
|  | break; | 
|  | case '?': | 
|  | { | 
|  | static const GdbCmdParseEntry target_halted_cmd_desc = { | 
|  | .handler = handle_target_halt, | 
|  | .cmd = "?", | 
|  | .cmd_startswith = 1, | 
|  | .allow_stop_reply = true, | 
|  | }; | 
|  | cmd_parser = &target_halted_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'c': | 
|  | { | 
|  | static const GdbCmdParseEntry continue_cmd_desc = { | 
|  | .handler = handle_continue, | 
|  | .cmd = "c", | 
|  | .cmd_startswith = 1, | 
|  | .allow_stop_reply = true, | 
|  | .schema = "L0" | 
|  | }; | 
|  | cmd_parser = &continue_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'C': | 
|  | { | 
|  | static const GdbCmdParseEntry cont_with_sig_cmd_desc = { | 
|  | .handler = handle_cont_with_sig, | 
|  | .cmd = "C", | 
|  | .cmd_startswith = 1, | 
|  | .allow_stop_reply = true, | 
|  | .schema = "l0" | 
|  | }; | 
|  | cmd_parser = &cont_with_sig_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'v': | 
|  | { | 
|  | static const GdbCmdParseEntry v_cmd_desc = { | 
|  | .handler = handle_v_commands, | 
|  | .cmd = "v", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s0" | 
|  | }; | 
|  | cmd_parser = &v_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'k': | 
|  | /* Kill the target */ | 
|  | error_report("QEMU: Terminated via GDBstub"); | 
|  | gdb_exit(0); | 
|  | gdb_qemu_exit(0); | 
|  | break; | 
|  | case 'D': | 
|  | { | 
|  | static const GdbCmdParseEntry detach_cmd_desc = { | 
|  | .handler = handle_detach, | 
|  | .cmd = "D", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "?.l0" | 
|  | }; | 
|  | cmd_parser = &detach_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 's': | 
|  | { | 
|  | static const GdbCmdParseEntry step_cmd_desc = { | 
|  | .handler = handle_step, | 
|  | .cmd = "s", | 
|  | .cmd_startswith = 1, | 
|  | .allow_stop_reply = true, | 
|  | .schema = "L0" | 
|  | }; | 
|  | cmd_parser = &step_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'b': | 
|  | { | 
|  | static const GdbCmdParseEntry backward_cmd_desc = { | 
|  | .handler = handle_backward, | 
|  | .cmd = "b", | 
|  | .cmd_startswith = 1, | 
|  | .allow_stop_reply = true, | 
|  | .schema = "o0" | 
|  | }; | 
|  | cmd_parser = &backward_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'F': | 
|  | { | 
|  | static const GdbCmdParseEntry file_io_cmd_desc = { | 
|  | .handler = gdb_handle_file_io, | 
|  | .cmd = "F", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "L,L,o0" | 
|  | }; | 
|  | cmd_parser = &file_io_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'g': | 
|  | { | 
|  | static const GdbCmdParseEntry read_all_regs_cmd_desc = { | 
|  | .handler = handle_read_all_regs, | 
|  | .cmd = "g", | 
|  | .cmd_startswith = 1 | 
|  | }; | 
|  | cmd_parser = &read_all_regs_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'G': | 
|  | { | 
|  | static const GdbCmdParseEntry write_all_regs_cmd_desc = { | 
|  | .handler = handle_write_all_regs, | 
|  | .cmd = "G", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s0" | 
|  | }; | 
|  | cmd_parser = &write_all_regs_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'm': | 
|  | { | 
|  | static const GdbCmdParseEntry read_mem_cmd_desc = { | 
|  | .handler = handle_read_mem, | 
|  | .cmd = "m", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "L,L0" | 
|  | }; | 
|  | cmd_parser = &read_mem_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'M': | 
|  | { | 
|  | static const GdbCmdParseEntry write_mem_cmd_desc = { | 
|  | .handler = handle_write_mem, | 
|  | .cmd = "M", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "L,L:s0" | 
|  | }; | 
|  | cmd_parser = &write_mem_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'p': | 
|  | { | 
|  | static const GdbCmdParseEntry get_reg_cmd_desc = { | 
|  | .handler = handle_get_reg, | 
|  | .cmd = "p", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "L0" | 
|  | }; | 
|  | cmd_parser = &get_reg_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'P': | 
|  | { | 
|  | static const GdbCmdParseEntry set_reg_cmd_desc = { | 
|  | .handler = handle_set_reg, | 
|  | .cmd = "P", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "L?s0" | 
|  | }; | 
|  | cmd_parser = &set_reg_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'Z': | 
|  | { | 
|  | static const GdbCmdParseEntry insert_bp_cmd_desc = { | 
|  | .handler = handle_insert_bp, | 
|  | .cmd = "Z", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l?L?L0" | 
|  | }; | 
|  | cmd_parser = &insert_bp_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'z': | 
|  | { | 
|  | static const GdbCmdParseEntry remove_bp_cmd_desc = { | 
|  | .handler = handle_remove_bp, | 
|  | .cmd = "z", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "l?L?L0" | 
|  | }; | 
|  | cmd_parser = &remove_bp_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'H': | 
|  | { | 
|  | static const GdbCmdParseEntry set_thread_cmd_desc = { | 
|  | .handler = handle_set_thread, | 
|  | .cmd = "H", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "o.t0" | 
|  | }; | 
|  | cmd_parser = &set_thread_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'T': | 
|  | { | 
|  | static const GdbCmdParseEntry thread_alive_cmd_desc = { | 
|  | .handler = handle_thread_alive, | 
|  | .cmd = "T", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "t0" | 
|  | }; | 
|  | cmd_parser = &thread_alive_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'q': | 
|  | { | 
|  | static const GdbCmdParseEntry gen_query_cmd_desc = { | 
|  | .handler = handle_gen_query, | 
|  | .cmd = "q", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s0" | 
|  | }; | 
|  | cmd_parser = &gen_query_cmd_desc; | 
|  | } | 
|  | break; | 
|  | case 'Q': | 
|  | { | 
|  | static const GdbCmdParseEntry gen_set_cmd_desc = { | 
|  | .handler = handle_gen_set, | 
|  | .cmd = "Q", | 
|  | .cmd_startswith = 1, | 
|  | .schema = "s0" | 
|  | }; | 
|  | cmd_parser = &gen_set_cmd_desc; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | /* put empty packet */ | 
|  | gdb_put_packet(""); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (cmd_parser) { | 
|  | run_cmd_parser(line_buf, cmd_parser); | 
|  | } | 
|  |  | 
|  | return RS_IDLE; | 
|  | } | 
|  |  | 
|  | void gdb_set_stop_cpu(CPUState *cpu) | 
|  | { | 
|  | GDBProcess *p = gdb_get_cpu_process(cpu); | 
|  |  | 
|  | if (!p->attached) { | 
|  | /* | 
|  | * Having a stop CPU corresponding to a process that is not attached | 
|  | * confuses GDB. So we ignore the request. | 
|  | */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | gdbserver_state.c_cpu = cpu; | 
|  | gdbserver_state.g_cpu = cpu; | 
|  | } | 
|  |  | 
|  | void gdb_read_byte(uint8_t ch) | 
|  | { | 
|  | uint8_t reply; | 
|  |  | 
|  | gdbserver_state.allow_stop_reply = false; | 
|  | #ifndef CONFIG_USER_ONLY | 
|  | if (gdbserver_state.last_packet->len) { | 
|  | /* Waiting for a response to the last packet.  If we see the start | 
|  | of a new command then abandon the previous response.  */ | 
|  | if (ch == '-') { | 
|  | trace_gdbstub_err_got_nack(); | 
|  | gdb_put_buffer(gdbserver_state.last_packet->data, | 
|  | gdbserver_state.last_packet->len); | 
|  | } else if (ch == '+') { | 
|  | trace_gdbstub_io_got_ack(); | 
|  | } else { | 
|  | trace_gdbstub_io_got_unexpected(ch); | 
|  | } | 
|  |  | 
|  | if (ch == '+' || ch == '$') { | 
|  | g_byte_array_set_size(gdbserver_state.last_packet, 0); | 
|  | } | 
|  | if (ch != '$') | 
|  | return; | 
|  | } | 
|  | if (runstate_is_running()) { | 
|  | /* | 
|  | * When the CPU is running, we cannot do anything except stop | 
|  | * it when receiving a char. This is expected on a Ctrl-C in the | 
|  | * gdb client. Because we are in all-stop mode, gdb sends a | 
|  | * 0x03 byte which is not a usual packet, so we handle it specially | 
|  | * here, but it does expect a stop reply. | 
|  | */ | 
|  | if (ch != 0x03) { | 
|  | trace_gdbstub_err_unexpected_runpkt(ch); | 
|  | } else { | 
|  | gdbserver_state.allow_stop_reply = true; | 
|  | } | 
|  | vm_stop(RUN_STATE_PAUSED); | 
|  | } else | 
|  | #endif | 
|  | { | 
|  | switch(gdbserver_state.state) { | 
|  | case RS_IDLE: | 
|  | if (ch == '$') { | 
|  | /* start of command packet */ | 
|  | gdbserver_state.line_buf_index = 0; | 
|  | gdbserver_state.line_sum = 0; | 
|  | gdbserver_state.state = RS_GETLINE; | 
|  | } else if (ch == '+') { | 
|  | /* | 
|  | * do nothing, gdb may preemptively send out ACKs on | 
|  | * initial connection | 
|  | */ | 
|  | } else { | 
|  | trace_gdbstub_err_garbage(ch); | 
|  | } | 
|  | break; | 
|  | case RS_GETLINE: | 
|  | if (ch == '}') { | 
|  | /* start escape sequence */ | 
|  | gdbserver_state.state = RS_GETLINE_ESC; | 
|  | gdbserver_state.line_sum += ch; | 
|  | } else if (ch == '*') { | 
|  | /* start run length encoding sequence */ | 
|  | gdbserver_state.state = RS_GETLINE_RLE; | 
|  | gdbserver_state.line_sum += ch; | 
|  | } else if (ch == '#') { | 
|  | /* end of command, start of checksum*/ | 
|  | gdbserver_state.state = RS_CHKSUM1; | 
|  | } else if (gdbserver_state.line_buf_index >= sizeof(gdbserver_state.line_buf) - 1) { | 
|  | trace_gdbstub_err_overrun(); | 
|  | gdbserver_state.state = RS_IDLE; | 
|  | } else { | 
|  | /* unescaped command character */ | 
|  | gdbserver_state.line_buf[gdbserver_state.line_buf_index++] = ch; | 
|  | gdbserver_state.line_sum += ch; | 
|  | } | 
|  | break; | 
|  | case RS_GETLINE_ESC: | 
|  | if (ch == '#') { | 
|  | /* unexpected end of command in escape sequence */ | 
|  | gdbserver_state.state = RS_CHKSUM1; | 
|  | } else if (gdbserver_state.line_buf_index >= sizeof(gdbserver_state.line_buf) - 1) { | 
|  | /* command buffer overrun */ | 
|  | trace_gdbstub_err_overrun(); | 
|  | gdbserver_state.state = RS_IDLE; | 
|  | } else { | 
|  | /* parse escaped character and leave escape state */ | 
|  | gdbserver_state.line_buf[gdbserver_state.line_buf_index++] = ch ^ 0x20; | 
|  | gdbserver_state.line_sum += ch; | 
|  | gdbserver_state.state = RS_GETLINE; | 
|  | } | 
|  | break; | 
|  | case RS_GETLINE_RLE: | 
|  | /* | 
|  | * Run-length encoding is explained in "Debugging with GDB / | 
|  | * Appendix E GDB Remote Serial Protocol / Overview". | 
|  | */ | 
|  | if (ch < ' ' || ch == '#' || ch == '$' || ch > 126) { | 
|  | /* invalid RLE count encoding */ | 
|  | trace_gdbstub_err_invalid_repeat(ch); | 
|  | gdbserver_state.state = RS_GETLINE; | 
|  | } else { | 
|  | /* decode repeat length */ | 
|  | int repeat = ch - ' ' + 3; | 
|  | if (gdbserver_state.line_buf_index + repeat >= sizeof(gdbserver_state.line_buf) - 1) { | 
|  | /* that many repeats would overrun the command buffer */ | 
|  | trace_gdbstub_err_overrun(); | 
|  | gdbserver_state.state = RS_IDLE; | 
|  | } else if (gdbserver_state.line_buf_index < 1) { | 
|  | /* got a repeat but we have nothing to repeat */ | 
|  | trace_gdbstub_err_invalid_rle(); | 
|  | gdbserver_state.state = RS_GETLINE; | 
|  | } else { | 
|  | /* repeat the last character */ | 
|  | memset(gdbserver_state.line_buf + gdbserver_state.line_buf_index, | 
|  | gdbserver_state.line_buf[gdbserver_state.line_buf_index - 1], repeat); | 
|  | gdbserver_state.line_buf_index += repeat; | 
|  | gdbserver_state.line_sum += ch; | 
|  | gdbserver_state.state = RS_GETLINE; | 
|  | } | 
|  | } | 
|  | break; | 
|  | case RS_CHKSUM1: | 
|  | /* get high hex digit of checksum */ | 
|  | if (!isxdigit(ch)) { | 
|  | trace_gdbstub_err_checksum_invalid(ch); | 
|  | gdbserver_state.state = RS_GETLINE; | 
|  | break; | 
|  | } | 
|  | gdbserver_state.line_buf[gdbserver_state.line_buf_index] = '\0'; | 
|  | gdbserver_state.line_csum = fromhex(ch) << 4; | 
|  | gdbserver_state.state = RS_CHKSUM2; | 
|  | break; | 
|  | case RS_CHKSUM2: | 
|  | /* get low hex digit of checksum */ | 
|  | if (!isxdigit(ch)) { | 
|  | trace_gdbstub_err_checksum_invalid(ch); | 
|  | gdbserver_state.state = RS_GETLINE; | 
|  | break; | 
|  | } | 
|  | gdbserver_state.line_csum |= fromhex(ch); | 
|  |  | 
|  | if (gdbserver_state.line_csum != (gdbserver_state.line_sum & 0xff)) { | 
|  | trace_gdbstub_err_checksum_incorrect(gdbserver_state.line_sum, gdbserver_state.line_csum); | 
|  | /* send NAK reply */ | 
|  | reply = '-'; | 
|  | gdb_put_buffer(&reply, 1); | 
|  | gdbserver_state.state = RS_IDLE; | 
|  | } else { | 
|  | /* send ACK reply */ | 
|  | reply = '+'; | 
|  | gdb_put_buffer(&reply, 1); | 
|  | gdbserver_state.state = gdb_handle_packet(gdbserver_state.line_buf); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | abort(); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create the process that will contain all the "orphan" CPUs (that are not | 
|  | * part of a CPU cluster). Note that if this process contains no CPUs, it won't | 
|  | * be attachable and thus will be invisible to the user. | 
|  | */ | 
|  | void gdb_create_default_process(GDBState *s) | 
|  | { | 
|  | GDBProcess *process; | 
|  | int pid; | 
|  |  | 
|  | #ifdef CONFIG_USER_ONLY | 
|  | assert(gdbserver_state.process_num == 0); | 
|  | pid = getpid(); | 
|  | #else | 
|  | if (gdbserver_state.process_num) { | 
|  | pid = s->processes[s->process_num - 1].pid; | 
|  | } else { | 
|  | pid = 0; | 
|  | } | 
|  | /* We need an available PID slot for this process */ | 
|  | assert(pid < UINT32_MAX); | 
|  | pid++; | 
|  | #endif | 
|  |  | 
|  | s->processes = g_renew(GDBProcess, s->processes, ++s->process_num); | 
|  | process = &s->processes[s->process_num - 1]; | 
|  | process->pid = pid; | 
|  | process->attached = false; | 
|  | process->target_xml = NULL; | 
|  | } | 
|  |  |