| /* |
| * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator |
| * |
| * PAPR Inter-VM Logical Lan, aka ibmveth |
| * |
| * Copyright (c) 2010,2011 David Gibson, IBM Corporation. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| * |
| */ |
| #include "qemu/osdep.h" |
| #include "qemu-common.h" |
| #include "cpu.h" |
| #include "hw/hw.h" |
| #include "qemu/log.h" |
| #include "net/net.h" |
| #include "hw/qdev.h" |
| #include "hw/ppc/spapr.h" |
| #include "hw/ppc/spapr_vio.h" |
| #include "sysemu/sysemu.h" |
| #include "trace.h" |
| |
| #include <libfdt.h> |
| |
| #define ETH_ALEN 6 |
| #define MAX_PACKET_SIZE 65536 |
| |
| /* Compatibility flags for migration */ |
| #define SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT 0 |
| #define SPAPRVLAN_FLAG_RX_BUF_POOLS (1 << SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT) |
| |
| /* |
| * Virtual LAN device |
| */ |
| |
| typedef uint64_t vlan_bd_t; |
| |
| #define VLAN_BD_VALID 0x8000000000000000ULL |
| #define VLAN_BD_TOGGLE 0x4000000000000000ULL |
| #define VLAN_BD_NO_CSUM 0x0200000000000000ULL |
| #define VLAN_BD_CSUM_GOOD 0x0100000000000000ULL |
| #define VLAN_BD_LEN_MASK 0x00ffffff00000000ULL |
| #define VLAN_BD_LEN(bd) (((bd) & VLAN_BD_LEN_MASK) >> 32) |
| #define VLAN_BD_ADDR_MASK 0x00000000ffffffffULL |
| #define VLAN_BD_ADDR(bd) ((bd) & VLAN_BD_ADDR_MASK) |
| |
| #define VLAN_VALID_BD(addr, len) (VLAN_BD_VALID | \ |
| (((len) << 32) & VLAN_BD_LEN_MASK) | \ |
| (addr & VLAN_BD_ADDR_MASK)) |
| |
| #define VLAN_RXQC_TOGGLE 0x80 |
| #define VLAN_RXQC_VALID 0x40 |
| #define VLAN_RXQC_NO_CSUM 0x02 |
| #define VLAN_RXQC_CSUM_GOOD 0x01 |
| |
| #define VLAN_RQ_ALIGNMENT 16 |
| #define VLAN_RXQ_BD_OFF 0 |
| #define VLAN_FILTER_BD_OFF 8 |
| #define VLAN_RX_BDS_OFF 16 |
| /* |
| * The final 8 bytes of the buffer list is a counter of frames dropped |
| * because there was not a buffer in the buffer list capable of holding |
| * the frame. We must avoid it, or the operating system will report garbage |
| * for this statistic. |
| */ |
| #define VLAN_RX_BDS_LEN (SPAPR_TCE_PAGE_SIZE - VLAN_RX_BDS_OFF - 8) |
| #define VLAN_MAX_BUFS (VLAN_RX_BDS_LEN / 8) |
| |
| #define TYPE_VIO_SPAPR_VLAN_DEVICE "spapr-vlan" |
| #define VIO_SPAPR_VLAN_DEVICE(obj) \ |
| OBJECT_CHECK(VIOsPAPRVLANDevice, (obj), TYPE_VIO_SPAPR_VLAN_DEVICE) |
| |
| #define RX_POOL_MAX_BDS 4096 |
| #define RX_MAX_POOLS 5 |
| |
| typedef struct { |
| int32_t bufsize; |
| int32_t count; |
| vlan_bd_t bds[RX_POOL_MAX_BDS]; |
| } RxBufPool; |
| |
| typedef struct VIOsPAPRVLANDevice { |
| VIOsPAPRDevice sdev; |
| NICConf nicconf; |
| NICState *nic; |
| MACAddr perm_mac; |
| bool isopen; |
| hwaddr buf_list; |
| uint32_t add_buf_ptr, use_buf_ptr, rx_bufs; |
| hwaddr rxq_ptr; |
| QEMUTimer *rxp_timer; |
| uint32_t compat_flags; /* Compatibility flags for migration */ |
| RxBufPool *rx_pool[RX_MAX_POOLS]; /* Receive buffer descriptor pools */ |
| } VIOsPAPRVLANDevice; |
| |
| static int spapr_vlan_can_receive(NetClientState *nc) |
| { |
| VIOsPAPRVLANDevice *dev = qemu_get_nic_opaque(nc); |
| |
| return (dev->isopen && dev->rx_bufs > 0); |
| } |
| |
| /** |
| * The last 8 bytes of the receive buffer list page (that has been |
| * supplied by the guest with the H_REGISTER_LOGICAL_LAN call) contain |
| * a counter for frames that have been dropped because there was no |
| * suitable receive buffer available. This function is used to increase |
| * this counter by one. |
| */ |
| static void spapr_vlan_record_dropped_rx_frame(VIOsPAPRVLANDevice *dev) |
| { |
| uint64_t cnt; |
| |
| cnt = vio_ldq(&dev->sdev, dev->buf_list + 4096 - 8); |
| vio_stq(&dev->sdev, dev->buf_list + 4096 - 8, cnt + 1); |
| } |
| |
| /** |
| * Get buffer descriptor from one of our receive buffer pools |
| */ |
| static vlan_bd_t spapr_vlan_get_rx_bd_from_pool(VIOsPAPRVLANDevice *dev, |
| size_t size) |
| { |
| vlan_bd_t bd; |
| int pool; |
| |
| for (pool = 0; pool < RX_MAX_POOLS; pool++) { |
| if (dev->rx_pool[pool]->count > 0 && |
| dev->rx_pool[pool]->bufsize >= size + 8) { |
| break; |
| } |
| } |
| if (pool == RX_MAX_POOLS) { |
| /* Failed to find a suitable buffer */ |
| return 0; |
| } |
| |
| |
| trace_spapr_vlan_get_rx_bd_from_pool_found(pool, |
| dev->rx_pool[pool]->count, |
| dev->rx_bufs); |
| |
| /* Remove the buffer from the pool */ |
| dev->rx_pool[pool]->count--; |
| bd = dev->rx_pool[pool]->bds[dev->rx_pool[pool]->count]; |
| dev->rx_pool[pool]->bds[dev->rx_pool[pool]->count] = 0; |
| |
| return bd; |
| } |
| |
| /** |
| * Get buffer descriptor from the receive buffer list page that has been |
| * supplied by the guest with the H_REGISTER_LOGICAL_LAN call |
| */ |
| static vlan_bd_t spapr_vlan_get_rx_bd_from_page(VIOsPAPRVLANDevice *dev, |
| size_t size) |
| { |
| int buf_ptr = dev->use_buf_ptr; |
| vlan_bd_t bd; |
| |
| do { |
| buf_ptr += 8; |
| if (buf_ptr >= VLAN_RX_BDS_LEN + VLAN_RX_BDS_OFF) { |
| buf_ptr = VLAN_RX_BDS_OFF; |
| } |
| |
| bd = vio_ldq(&dev->sdev, dev->buf_list + buf_ptr); |
| |
| trace_spapr_vlan_get_rx_bd_from_page(buf_ptr, (uint64_t)bd); |
| } while ((!(bd & VLAN_BD_VALID) || VLAN_BD_LEN(bd) < size + 8) |
| && buf_ptr != dev->use_buf_ptr); |
| |
| if (!(bd & VLAN_BD_VALID) || VLAN_BD_LEN(bd) < size + 8) { |
| /* Failed to find a suitable buffer */ |
| return 0; |
| } |
| |
| /* Remove the buffer from the pool */ |
| dev->use_buf_ptr = buf_ptr; |
| vio_stq(&dev->sdev, dev->buf_list + dev->use_buf_ptr, 0); |
| |
| trace_spapr_vlan_get_rx_bd_from_page_found(dev->use_buf_ptr, dev->rx_bufs); |
| |
| return bd; |
| } |
| |
| static ssize_t spapr_vlan_receive(NetClientState *nc, const uint8_t *buf, |
| size_t size) |
| { |
| VIOsPAPRVLANDevice *dev = qemu_get_nic_opaque(nc); |
| VIOsPAPRDevice *sdev = VIO_SPAPR_DEVICE(dev); |
| vlan_bd_t rxq_bd = vio_ldq(sdev, dev->buf_list + VLAN_RXQ_BD_OFF); |
| vlan_bd_t bd; |
| uint64_t handle; |
| uint8_t control; |
| |
| trace_spapr_vlan_receive(sdev->qdev.id, dev->rx_bufs); |
| |
| if (!dev->isopen) { |
| return -1; |
| } |
| |
| if (!dev->rx_bufs) { |
| spapr_vlan_record_dropped_rx_frame(dev); |
| return 0; |
| } |
| |
| if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) { |
| bd = spapr_vlan_get_rx_bd_from_pool(dev, size); |
| } else { |
| bd = spapr_vlan_get_rx_bd_from_page(dev, size); |
| } |
| if (!bd) { |
| spapr_vlan_record_dropped_rx_frame(dev); |
| return 0; |
| } |
| |
| dev->rx_bufs--; |
| |
| /* Transfer the packet data */ |
| if (spapr_vio_dma_write(sdev, VLAN_BD_ADDR(bd) + 8, buf, size) < 0) { |
| return -1; |
| } |
| |
| trace_spapr_vlan_receive_dma_completed(); |
| |
| /* Update the receive queue */ |
| control = VLAN_RXQC_TOGGLE | VLAN_RXQC_VALID; |
| if (rxq_bd & VLAN_BD_TOGGLE) { |
| control ^= VLAN_RXQC_TOGGLE; |
| } |
| |
| handle = vio_ldq(sdev, VLAN_BD_ADDR(bd)); |
| vio_stq(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 8, handle); |
| vio_stl(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 4, size); |
| vio_sth(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr + 2, 8); |
| vio_stb(sdev, VLAN_BD_ADDR(rxq_bd) + dev->rxq_ptr, control); |
| |
| trace_spapr_vlan_receive_wrote(dev->rxq_ptr, |
| vio_ldq(sdev, VLAN_BD_ADDR(rxq_bd) + |
| dev->rxq_ptr), |
| vio_ldq(sdev, VLAN_BD_ADDR(rxq_bd) + |
| dev->rxq_ptr + 8)); |
| |
| dev->rxq_ptr += 16; |
| if (dev->rxq_ptr >= VLAN_BD_LEN(rxq_bd)) { |
| dev->rxq_ptr = 0; |
| vio_stq(sdev, dev->buf_list + VLAN_RXQ_BD_OFF, rxq_bd ^ VLAN_BD_TOGGLE); |
| } |
| |
| if (sdev->signal_state & 1) { |
| qemu_irq_pulse(spapr_vio_qirq(sdev)); |
| } |
| |
| return size; |
| } |
| |
| static NetClientInfo net_spapr_vlan_info = { |
| .type = NET_CLIENT_DRIVER_NIC, |
| .size = sizeof(NICState), |
| .can_receive = spapr_vlan_can_receive, |
| .receive = spapr_vlan_receive, |
| }; |
| |
| static void spapr_vlan_flush_rx_queue(void *opaque) |
| { |
| VIOsPAPRVLANDevice *dev = opaque; |
| |
| qemu_flush_queued_packets(qemu_get_queue(dev->nic)); |
| } |
| |
| static void spapr_vlan_reset_rx_pool(RxBufPool *rxp) |
| { |
| /* |
| * Use INT_MAX as bufsize so that unused buffers are moved to the end |
| * of the list during the qsort in spapr_vlan_add_rxbuf_to_pool() later. |
| */ |
| rxp->bufsize = INT_MAX; |
| rxp->count = 0; |
| memset(rxp->bds, 0, sizeof(rxp->bds)); |
| } |
| |
| static void spapr_vlan_reset(VIOsPAPRDevice *sdev) |
| { |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev); |
| int i; |
| |
| dev->buf_list = 0; |
| dev->rx_bufs = 0; |
| dev->isopen = 0; |
| |
| if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) { |
| for (i = 0; i < RX_MAX_POOLS; i++) { |
| spapr_vlan_reset_rx_pool(dev->rx_pool[i]); |
| } |
| } |
| |
| memcpy(&dev->nicconf.macaddr.a, &dev->perm_mac.a, |
| sizeof(dev->nicconf.macaddr.a)); |
| qemu_format_nic_info_str(qemu_get_queue(dev->nic), dev->nicconf.macaddr.a); |
| } |
| |
| static void spapr_vlan_realize(VIOsPAPRDevice *sdev, Error **errp) |
| { |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev); |
| |
| qemu_macaddr_default_if_unset(&dev->nicconf.macaddr); |
| |
| memcpy(&dev->perm_mac.a, &dev->nicconf.macaddr.a, sizeof(dev->perm_mac.a)); |
| |
| dev->nic = qemu_new_nic(&net_spapr_vlan_info, &dev->nicconf, |
| object_get_typename(OBJECT(sdev)), sdev->qdev.id, dev); |
| qemu_format_nic_info_str(qemu_get_queue(dev->nic), dev->nicconf.macaddr.a); |
| |
| dev->rxp_timer = timer_new_us(QEMU_CLOCK_VIRTUAL, spapr_vlan_flush_rx_queue, |
| dev); |
| } |
| |
| static void spapr_vlan_instance_init(Object *obj) |
| { |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(obj); |
| int i; |
| |
| device_add_bootindex_property(obj, &dev->nicconf.bootindex, |
| "bootindex", "", |
| DEVICE(dev), NULL); |
| |
| if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) { |
| for (i = 0; i < RX_MAX_POOLS; i++) { |
| dev->rx_pool[i] = g_new(RxBufPool, 1); |
| spapr_vlan_reset_rx_pool(dev->rx_pool[i]); |
| } |
| } |
| } |
| |
| static void spapr_vlan_instance_finalize(Object *obj) |
| { |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(obj); |
| int i; |
| |
| if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) { |
| for (i = 0; i < RX_MAX_POOLS; i++) { |
| g_free(dev->rx_pool[i]); |
| dev->rx_pool[i] = NULL; |
| } |
| } |
| |
| if (dev->rxp_timer) { |
| timer_del(dev->rxp_timer); |
| timer_free(dev->rxp_timer); |
| } |
| } |
| |
| void spapr_vlan_create(VIOsPAPRBus *bus, NICInfo *nd) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(&bus->bus, "spapr-vlan"); |
| |
| qdev_set_nic_properties(dev, nd); |
| |
| qdev_init_nofail(dev); |
| } |
| |
| static int spapr_vlan_devnode(VIOsPAPRDevice *dev, void *fdt, int node_off) |
| { |
| VIOsPAPRVLANDevice *vdev = VIO_SPAPR_VLAN_DEVICE(dev); |
| uint8_t padded_mac[8] = {0, 0}; |
| int ret; |
| |
| /* Some old phyp versions give the mac address in an 8-byte |
| * property. The kernel driver (before 3.10) has an insane workaround; |
| * rather than doing the obvious thing and checking the property |
| * length, it checks whether the first byte has 0b10 in the low |
| * bits. If a correct 6-byte property has a different first byte |
| * the kernel will get the wrong mac address, overrunning its |
| * buffer in the process (read only, thank goodness). |
| * |
| * Here we return a 6-byte address unless that would break a pre-3.10 |
| * driver. In that case we return a padded 8-byte address to allow the old |
| * workaround to succeed. */ |
| if ((vdev->nicconf.macaddr.a[0] & 0x3) == 0x2) { |
| ret = fdt_setprop(fdt, node_off, "local-mac-address", |
| &vdev->nicconf.macaddr, ETH_ALEN); |
| } else { |
| memcpy(&padded_mac[2], &vdev->nicconf.macaddr, ETH_ALEN); |
| ret = fdt_setprop(fdt, node_off, "local-mac-address", |
| padded_mac, sizeof(padded_mac)); |
| } |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = fdt_setprop_cell(fdt, node_off, "ibm,mac-address-filters", 0); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int check_bd(VIOsPAPRVLANDevice *dev, vlan_bd_t bd, |
| target_ulong alignment) |
| { |
| if ((VLAN_BD_ADDR(bd) % alignment) |
| || (VLAN_BD_LEN(bd) % alignment)) { |
| return -1; |
| } |
| |
| if (!spapr_vio_dma_valid(&dev->sdev, VLAN_BD_ADDR(bd), |
| VLAN_BD_LEN(bd), DMA_DIRECTION_FROM_DEVICE) |
| || !spapr_vio_dma_valid(&dev->sdev, VLAN_BD_ADDR(bd), |
| VLAN_BD_LEN(bd), DMA_DIRECTION_TO_DEVICE)) { |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static target_ulong h_register_logical_lan(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| target_ulong opcode, |
| target_ulong *args) |
| { |
| target_ulong reg = args[0]; |
| target_ulong buf_list = args[1]; |
| target_ulong rec_queue = args[2]; |
| target_ulong filter_list = args[3]; |
| VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg); |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev); |
| vlan_bd_t filter_list_bd; |
| |
| if (!dev) { |
| return H_PARAMETER; |
| } |
| |
| if (dev->isopen) { |
| hcall_dprintf("H_REGISTER_LOGICAL_LAN called twice without " |
| "H_FREE_LOGICAL_LAN\n"); |
| return H_RESOURCE; |
| } |
| |
| if (check_bd(dev, VLAN_VALID_BD(buf_list, SPAPR_TCE_PAGE_SIZE), |
| SPAPR_TCE_PAGE_SIZE) < 0) { |
| hcall_dprintf("Bad buf_list 0x" TARGET_FMT_lx "\n", buf_list); |
| return H_PARAMETER; |
| } |
| |
| filter_list_bd = VLAN_VALID_BD(filter_list, SPAPR_TCE_PAGE_SIZE); |
| if (check_bd(dev, filter_list_bd, SPAPR_TCE_PAGE_SIZE) < 0) { |
| hcall_dprintf("Bad filter_list 0x" TARGET_FMT_lx "\n", filter_list); |
| return H_PARAMETER; |
| } |
| |
| if (!(rec_queue & VLAN_BD_VALID) |
| || (check_bd(dev, rec_queue, VLAN_RQ_ALIGNMENT) < 0)) { |
| hcall_dprintf("Bad receive queue\n"); |
| return H_PARAMETER; |
| } |
| |
| dev->buf_list = buf_list; |
| sdev->signal_state = 0; |
| |
| rec_queue &= ~VLAN_BD_TOGGLE; |
| |
| /* Initialize the buffer list */ |
| vio_stq(sdev, buf_list, rec_queue); |
| vio_stq(sdev, buf_list + 8, filter_list_bd); |
| spapr_vio_dma_set(sdev, buf_list + VLAN_RX_BDS_OFF, 0, |
| SPAPR_TCE_PAGE_SIZE - VLAN_RX_BDS_OFF); |
| dev->add_buf_ptr = VLAN_RX_BDS_OFF - 8; |
| dev->use_buf_ptr = VLAN_RX_BDS_OFF - 8; |
| dev->rx_bufs = 0; |
| dev->rxq_ptr = 0; |
| |
| /* Initialize the receive queue */ |
| spapr_vio_dma_set(sdev, VLAN_BD_ADDR(rec_queue), 0, VLAN_BD_LEN(rec_queue)); |
| |
| dev->isopen = 1; |
| qemu_flush_queued_packets(qemu_get_queue(dev->nic)); |
| |
| return H_SUCCESS; |
| } |
| |
| |
| static target_ulong h_free_logical_lan(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| target_ulong opcode, target_ulong *args) |
| { |
| target_ulong reg = args[0]; |
| VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg); |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev); |
| |
| if (!dev) { |
| return H_PARAMETER; |
| } |
| |
| if (!dev->isopen) { |
| hcall_dprintf("H_FREE_LOGICAL_LAN called without " |
| "H_REGISTER_LOGICAL_LAN\n"); |
| return H_RESOURCE; |
| } |
| |
| spapr_vlan_reset(sdev); |
| return H_SUCCESS; |
| } |
| |
| /** |
| * Used for qsort, this function compares two RxBufPools by size. |
| */ |
| static int rx_pool_size_compare(const void *p1, const void *p2) |
| { |
| const RxBufPool *pool1 = *(RxBufPool **)p1; |
| const RxBufPool *pool2 = *(RxBufPool **)p2; |
| |
| if (pool1->bufsize < pool2->bufsize) { |
| return -1; |
| } |
| return pool1->bufsize > pool2->bufsize; |
| } |
| |
| /** |
| * Search for a matching buffer pool with exact matching size, |
| * or return -1 if no matching pool has been found. |
| */ |
| static int spapr_vlan_get_rx_pool_id(VIOsPAPRVLANDevice *dev, int size) |
| { |
| int pool; |
| |
| for (pool = 0; pool < RX_MAX_POOLS; pool++) { |
| if (dev->rx_pool[pool]->bufsize == size) { |
| return pool; |
| } |
| } |
| |
| return -1; |
| } |
| |
| /** |
| * Enqueuing receive buffer by adding it to one of our receive buffer pools |
| */ |
| static target_long spapr_vlan_add_rxbuf_to_pool(VIOsPAPRVLANDevice *dev, |
| target_ulong buf) |
| { |
| int size = VLAN_BD_LEN(buf); |
| int pool; |
| |
| pool = spapr_vlan_get_rx_pool_id(dev, size); |
| if (pool < 0) { |
| /* |
| * No matching pool found? Try to use a new one. If the guest used all |
| * pools before, but changed the size of one pool in the meantime, we might |
| * need to recycle that pool here (if it's empty already). Thus scan |
| * all buffer pools now, starting with the last (likely empty) one. |
| */ |
| for (pool = RX_MAX_POOLS - 1; pool >= 0 ; pool--) { |
| if (dev->rx_pool[pool]->count == 0) { |
| dev->rx_pool[pool]->bufsize = size; |
| /* |
| * Sort pools by size so that spapr_vlan_receive() |
| * can later find the smallest buffer pool easily. |
| */ |
| qsort(dev->rx_pool, RX_MAX_POOLS, sizeof(dev->rx_pool[0]), |
| rx_pool_size_compare); |
| pool = spapr_vlan_get_rx_pool_id(dev, size); |
| trace_spapr_vlan_add_rxbuf_to_pool_create(pool, |
| VLAN_BD_LEN(buf)); |
| break; |
| } |
| } |
| } |
| /* Still no usable pool? Give up */ |
| if (pool < 0 || dev->rx_pool[pool]->count >= RX_POOL_MAX_BDS) { |
| return H_RESOURCE; |
| } |
| |
| trace_spapr_vlan_add_rxbuf_to_pool(pool, VLAN_BD_LEN(buf), |
| dev->rx_pool[pool]->count); |
| |
| dev->rx_pool[pool]->bds[dev->rx_pool[pool]->count++] = buf; |
| |
| return 0; |
| } |
| |
| /** |
| * This is the old way of enqueuing receive buffers: Add it to the rx queue |
| * page that has been supplied by the guest (which is quite limited in size). |
| */ |
| static target_long spapr_vlan_add_rxbuf_to_page(VIOsPAPRVLANDevice *dev, |
| target_ulong buf) |
| { |
| vlan_bd_t bd; |
| |
| if (dev->rx_bufs >= VLAN_MAX_BUFS) { |
| return H_RESOURCE; |
| } |
| |
| do { |
| dev->add_buf_ptr += 8; |
| if (dev->add_buf_ptr >= VLAN_RX_BDS_LEN + VLAN_RX_BDS_OFF) { |
| dev->add_buf_ptr = VLAN_RX_BDS_OFF; |
| } |
| |
| bd = vio_ldq(&dev->sdev, dev->buf_list + dev->add_buf_ptr); |
| } while (bd & VLAN_BD_VALID); |
| |
| vio_stq(&dev->sdev, dev->buf_list + dev->add_buf_ptr, buf); |
| |
| trace_spapr_vlan_add_rxbuf_to_page(dev->add_buf_ptr, dev->rx_bufs, buf); |
| |
| return 0; |
| } |
| |
| static target_ulong h_add_logical_lan_buffer(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| target_ulong opcode, |
| target_ulong *args) |
| { |
| target_ulong reg = args[0]; |
| target_ulong buf = args[1]; |
| VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg); |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev); |
| target_long ret; |
| |
| trace_spapr_vlan_h_add_logical_lan_buffer(reg, buf); |
| |
| if (!sdev) { |
| hcall_dprintf("Bad device\n"); |
| return H_PARAMETER; |
| } |
| |
| if ((check_bd(dev, buf, 4) < 0) |
| || (VLAN_BD_LEN(buf) < 16)) { |
| hcall_dprintf("Bad buffer enqueued\n"); |
| return H_PARAMETER; |
| } |
| |
| if (!dev->isopen) { |
| return H_RESOURCE; |
| } |
| |
| if (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) { |
| ret = spapr_vlan_add_rxbuf_to_pool(dev, buf); |
| } else { |
| ret = spapr_vlan_add_rxbuf_to_page(dev, buf); |
| } |
| if (ret) { |
| return ret; |
| } |
| |
| dev->rx_bufs++; |
| |
| /* |
| * Give guest some more time to add additional RX buffers before we |
| * flush the receive queue, so that e.g. fragmented IP packets can |
| * be passed to the guest in one go later (instead of passing single |
| * fragments if there is only one receive buffer available). |
| */ |
| timer_mod(dev->rxp_timer, qemu_clock_get_us(QEMU_CLOCK_VIRTUAL) + 500); |
| |
| return H_SUCCESS; |
| } |
| |
| static target_ulong h_send_logical_lan(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| target_ulong opcode, target_ulong *args) |
| { |
| target_ulong reg = args[0]; |
| target_ulong *bufs = args + 1; |
| target_ulong continue_token = args[7]; |
| VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg); |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev); |
| unsigned total_len; |
| uint8_t *lbuf, *p; |
| int i, nbufs; |
| int ret; |
| |
| trace_spapr_vlan_h_send_logical_lan(reg, continue_token); |
| |
| if (!sdev) { |
| return H_PARAMETER; |
| } |
| |
| trace_spapr_vlan_h_send_logical_lan_rxbufs(dev->rx_bufs); |
| |
| if (!dev->isopen) { |
| return H_DROPPED; |
| } |
| |
| if (continue_token) { |
| return H_HARDWARE; /* FIXME actually handle this */ |
| } |
| |
| total_len = 0; |
| for (i = 0; i < 6; i++) { |
| trace_spapr_vlan_h_send_logical_lan_buf_desc(bufs[i]); |
| if (!(bufs[i] & VLAN_BD_VALID)) { |
| break; |
| } |
| total_len += VLAN_BD_LEN(bufs[i]); |
| } |
| |
| nbufs = i; |
| trace_spapr_vlan_h_send_logical_lan_total(nbufs, total_len); |
| |
| if (total_len == 0) { |
| return H_SUCCESS; |
| } |
| |
| if (total_len > MAX_PACKET_SIZE) { |
| /* Don't let the guest force too large an allocation */ |
| return H_RESOURCE; |
| } |
| |
| lbuf = alloca(total_len); |
| p = lbuf; |
| for (i = 0; i < nbufs; i++) { |
| ret = spapr_vio_dma_read(sdev, VLAN_BD_ADDR(bufs[i]), |
| p, VLAN_BD_LEN(bufs[i])); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| p += VLAN_BD_LEN(bufs[i]); |
| } |
| |
| qemu_send_packet(qemu_get_queue(dev->nic), lbuf, total_len); |
| |
| return H_SUCCESS; |
| } |
| |
| static target_ulong h_multicast_ctrl(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| target_ulong opcode, target_ulong *args) |
| { |
| target_ulong reg = args[0]; |
| VIOsPAPRDevice *dev = spapr_vio_find_by_reg(spapr->vio_bus, reg); |
| |
| if (!dev) { |
| return H_PARAMETER; |
| } |
| |
| return H_SUCCESS; |
| } |
| |
| static target_ulong h_change_logical_lan_mac(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| target_ulong opcode, |
| target_ulong *args) |
| { |
| target_ulong reg = args[0]; |
| target_ulong macaddr = args[1]; |
| VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg); |
| VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev); |
| int i; |
| |
| for (i = 0; i < ETH_ALEN; i++) { |
| dev->nicconf.macaddr.a[ETH_ALEN - i - 1] = macaddr & 0xff; |
| macaddr >>= 8; |
| } |
| |
| qemu_format_nic_info_str(qemu_get_queue(dev->nic), dev->nicconf.macaddr.a); |
| |
| return H_SUCCESS; |
| } |
| |
| static Property spapr_vlan_properties[] = { |
| DEFINE_SPAPR_PROPERTIES(VIOsPAPRVLANDevice, sdev), |
| DEFINE_NIC_PROPERTIES(VIOsPAPRVLANDevice, nicconf), |
| DEFINE_PROP_BIT("use-rx-buffer-pools", VIOsPAPRVLANDevice, |
| compat_flags, SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT, true), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static bool spapr_vlan_rx_buffer_pools_needed(void *opaque) |
| { |
| VIOsPAPRVLANDevice *dev = opaque; |
| |
| return (dev->compat_flags & SPAPRVLAN_FLAG_RX_BUF_POOLS) != 0; |
| } |
| |
| static const VMStateDescription vmstate_rx_buffer_pool = { |
| .name = "spapr_llan/rx_buffer_pool", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .needed = spapr_vlan_rx_buffer_pools_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_INT32(bufsize, RxBufPool), |
| VMSTATE_INT32(count, RxBufPool), |
| VMSTATE_UINT64_ARRAY(bds, RxBufPool, RX_POOL_MAX_BDS), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_rx_pools = { |
| .name = "spapr_llan/rx_pools", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .needed = spapr_vlan_rx_buffer_pools_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(rx_pool, VIOsPAPRVLANDevice, |
| RX_MAX_POOLS, 1, |
| vmstate_rx_buffer_pool, RxBufPool), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_spapr_llan = { |
| .name = "spapr_llan", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_SPAPR_VIO(sdev, VIOsPAPRVLANDevice), |
| /* LLAN state */ |
| VMSTATE_BOOL(isopen, VIOsPAPRVLANDevice), |
| VMSTATE_UINT64(buf_list, VIOsPAPRVLANDevice), |
| VMSTATE_UINT32(add_buf_ptr, VIOsPAPRVLANDevice), |
| VMSTATE_UINT32(use_buf_ptr, VIOsPAPRVLANDevice), |
| VMSTATE_UINT32(rx_bufs, VIOsPAPRVLANDevice), |
| VMSTATE_UINT64(rxq_ptr, VIOsPAPRVLANDevice), |
| |
| VMSTATE_END_OF_LIST() |
| }, |
| .subsections = (const VMStateDescription * []) { |
| &vmstate_rx_pools, |
| NULL |
| } |
| }; |
| |
| static void spapr_vlan_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VIOsPAPRDeviceClass *k = VIO_SPAPR_DEVICE_CLASS(klass); |
| |
| k->realize = spapr_vlan_realize; |
| k->reset = spapr_vlan_reset; |
| k->devnode = spapr_vlan_devnode; |
| k->dt_name = "l-lan"; |
| k->dt_type = "network"; |
| k->dt_compatible = "IBM,l-lan"; |
| k->signal_mask = 0x1; |
| set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); |
| dc->props = spapr_vlan_properties; |
| k->rtce_window_size = 0x10000000; |
| dc->vmsd = &vmstate_spapr_llan; |
| } |
| |
| static const TypeInfo spapr_vlan_info = { |
| .name = TYPE_VIO_SPAPR_VLAN_DEVICE, |
| .parent = TYPE_VIO_SPAPR_DEVICE, |
| .instance_size = sizeof(VIOsPAPRVLANDevice), |
| .class_init = spapr_vlan_class_init, |
| .instance_init = spapr_vlan_instance_init, |
| .instance_finalize = spapr_vlan_instance_finalize, |
| }; |
| |
| static void spapr_vlan_register_types(void) |
| { |
| spapr_register_hypercall(H_REGISTER_LOGICAL_LAN, h_register_logical_lan); |
| spapr_register_hypercall(H_FREE_LOGICAL_LAN, h_free_logical_lan); |
| spapr_register_hypercall(H_SEND_LOGICAL_LAN, h_send_logical_lan); |
| spapr_register_hypercall(H_ADD_LOGICAL_LAN_BUFFER, |
| h_add_logical_lan_buffer); |
| spapr_register_hypercall(H_MULTICAST_CTRL, h_multicast_ctrl); |
| spapr_register_hypercall(H_CHANGE_LOGICAL_LAN_MAC, |
| h_change_logical_lan_mac); |
| type_register_static(&spapr_vlan_info); |
| } |
| |
| type_init(spapr_vlan_register_types) |