| /* |
| * QEMU S390 virtio target |
| * |
| * Copyright (c) 2009 Alexander Graf <agraf@suse.de> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "hw.h" |
| #include "block.h" |
| #include "sysemu.h" |
| #include "net.h" |
| #include "boards.h" |
| #include "monitor.h" |
| #include "loader.h" |
| #include "elf.h" |
| #include "hw/virtio.h" |
| #include "hw/virtio-serial.h" |
| #include "hw/virtio-net.h" |
| #include "hw/sysbus.h" |
| #include "kvm.h" |
| |
| #include "hw/s390-virtio-bus.h" |
| |
| /* #define DEBUG_S390 */ |
| |
| #ifdef DEBUG_S390 |
| #define dprintf(fmt, ...) \ |
| do { fprintf(stderr, fmt, ## __VA_ARGS__); } while (0) |
| #else |
| #define dprintf(fmt, ...) \ |
| do { } while (0) |
| #endif |
| |
| #define VIRTIO_EXT_CODE 0x2603 |
| |
| struct BusInfo s390_virtio_bus_info = { |
| .name = "s390-virtio", |
| .size = sizeof(VirtIOS390Bus), |
| }; |
| |
| static const VirtIOBindings virtio_s390_bindings; |
| |
| static ram_addr_t s390_virtio_device_num_vq(VirtIOS390Device *dev); |
| |
| /* length of VirtIO device pages */ |
| const target_phys_addr_t virtio_size = S390_DEVICE_PAGES * TARGET_PAGE_SIZE; |
| |
| VirtIOS390Bus *s390_virtio_bus_init(ram_addr_t *ram_size) |
| { |
| VirtIOS390Bus *bus; |
| BusState *_bus; |
| DeviceState *dev; |
| |
| /* Create bridge device */ |
| dev = qdev_create(NULL, "s390-virtio-bridge"); |
| qdev_init_nofail(dev); |
| |
| /* Create bus on bridge device */ |
| |
| _bus = qbus_create(&s390_virtio_bus_info, dev, "s390-virtio"); |
| bus = DO_UPCAST(VirtIOS390Bus, bus, _bus); |
| |
| bus->dev_page = *ram_size; |
| bus->dev_offs = bus->dev_page; |
| bus->next_ring = bus->dev_page + TARGET_PAGE_SIZE; |
| |
| /* Enable hotplugging */ |
| _bus->allow_hotplug = 1; |
| |
| /* Allocate RAM for VirtIO device pages (descriptors, queues, rings) */ |
| *ram_size += S390_DEVICE_PAGES * TARGET_PAGE_SIZE; |
| |
| return bus; |
| } |
| |
| static void s390_virtio_irq(CPUS390XState *env, int config_change, uint64_t token) |
| { |
| if (kvm_enabled()) { |
| kvm_s390_virtio_irq(env, config_change, token); |
| } else { |
| cpu_inject_ext(env, VIRTIO_EXT_CODE, config_change, token); |
| } |
| } |
| |
| static int s390_virtio_device_init(VirtIOS390Device *dev, VirtIODevice *vdev) |
| { |
| VirtIOS390Bus *bus; |
| int dev_len; |
| |
| bus = DO_UPCAST(VirtIOS390Bus, bus, dev->qdev.parent_bus); |
| dev->vdev = vdev; |
| dev->dev_offs = bus->dev_offs; |
| dev->feat_len = sizeof(uint32_t); /* always keep 32 bits features */ |
| |
| dev_len = VIRTIO_DEV_OFFS_CONFIG; |
| dev_len += s390_virtio_device_num_vq(dev) * VIRTIO_VQCONFIG_LEN; |
| dev_len += dev->feat_len * 2; |
| dev_len += vdev->config_len; |
| |
| bus->dev_offs += dev_len; |
| |
| virtio_bind_device(vdev, &virtio_s390_bindings, dev); |
| dev->host_features = vdev->get_features(vdev, dev->host_features); |
| s390_virtio_device_sync(dev); |
| |
| if (dev->qdev.hotplugged) { |
| CPUS390XState *env = s390_cpu_addr2state(0); |
| s390_virtio_irq(env, VIRTIO_PARAM_DEV_ADD, dev->dev_offs); |
| } |
| |
| return 0; |
| } |
| |
| static int s390_virtio_net_init(VirtIOS390Device *dev) |
| { |
| VirtIODevice *vdev; |
| |
| vdev = virtio_net_init((DeviceState *)dev, &dev->nic, &dev->net); |
| if (!vdev) { |
| return -1; |
| } |
| |
| return s390_virtio_device_init(dev, vdev); |
| } |
| |
| static int s390_virtio_blk_init(VirtIOS390Device *dev) |
| { |
| VirtIODevice *vdev; |
| |
| vdev = virtio_blk_init((DeviceState *)dev, &dev->block, |
| &dev->block_serial); |
| if (!vdev) { |
| return -1; |
| } |
| |
| return s390_virtio_device_init(dev, vdev); |
| } |
| |
| static int s390_virtio_serial_init(VirtIOS390Device *dev) |
| { |
| VirtIOS390Bus *bus; |
| VirtIODevice *vdev; |
| int r; |
| |
| bus = DO_UPCAST(VirtIOS390Bus, bus, dev->qdev.parent_bus); |
| |
| vdev = virtio_serial_init((DeviceState *)dev, &dev->serial); |
| if (!vdev) { |
| return -1; |
| } |
| |
| r = s390_virtio_device_init(dev, vdev); |
| if (!r) { |
| bus->console = dev; |
| } |
| |
| return r; |
| } |
| |
| static int s390_virtio_scsi_init(VirtIOS390Device *dev) |
| { |
| VirtIODevice *vdev; |
| |
| vdev = virtio_scsi_init((DeviceState *)dev, &dev->scsi); |
| if (!vdev) { |
| return -1; |
| } |
| |
| return s390_virtio_device_init(dev, vdev); |
| } |
| |
| static uint64_t s390_virtio_device_vq_token(VirtIOS390Device *dev, int vq) |
| { |
| ram_addr_t token_off; |
| |
| token_off = (dev->dev_offs + VIRTIO_DEV_OFFS_CONFIG) + |
| (vq * VIRTIO_VQCONFIG_LEN) + |
| VIRTIO_VQCONFIG_OFFS_TOKEN; |
| |
| return ldq_be_phys(token_off); |
| } |
| |
| static ram_addr_t s390_virtio_device_num_vq(VirtIOS390Device *dev) |
| { |
| VirtIODevice *vdev = dev->vdev; |
| int num_vq; |
| |
| for (num_vq = 0; num_vq < VIRTIO_PCI_QUEUE_MAX; num_vq++) { |
| if (!virtio_queue_get_num(vdev, num_vq)) { |
| break; |
| } |
| } |
| |
| return num_vq; |
| } |
| |
| static ram_addr_t s390_virtio_next_ring(VirtIOS390Bus *bus) |
| { |
| ram_addr_t r = bus->next_ring; |
| |
| bus->next_ring += VIRTIO_RING_LEN; |
| return r; |
| } |
| |
| void s390_virtio_device_sync(VirtIOS390Device *dev) |
| { |
| VirtIOS390Bus *bus = DO_UPCAST(VirtIOS390Bus, bus, dev->qdev.parent_bus); |
| ram_addr_t cur_offs; |
| uint8_t num_vq; |
| int i; |
| |
| virtio_reset(dev->vdev); |
| |
| /* Sync dev space */ |
| stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_TYPE, dev->vdev->device_id); |
| |
| stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_NUM_VQ, s390_virtio_device_num_vq(dev)); |
| stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_FEATURE_LEN, dev->feat_len); |
| |
| stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_CONFIG_LEN, dev->vdev->config_len); |
| |
| num_vq = s390_virtio_device_num_vq(dev); |
| stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_NUM_VQ, num_vq); |
| |
| /* Sync virtqueues */ |
| for (i = 0; i < num_vq; i++) { |
| ram_addr_t vq = (dev->dev_offs + VIRTIO_DEV_OFFS_CONFIG) + |
| (i * VIRTIO_VQCONFIG_LEN); |
| ram_addr_t vring; |
| |
| vring = s390_virtio_next_ring(bus); |
| virtio_queue_set_addr(dev->vdev, i, vring); |
| virtio_queue_set_vector(dev->vdev, i, i); |
| stq_be_phys(vq + VIRTIO_VQCONFIG_OFFS_ADDRESS, vring); |
| stw_be_phys(vq + VIRTIO_VQCONFIG_OFFS_NUM, virtio_queue_get_num(dev->vdev, i)); |
| } |
| |
| cur_offs = dev->dev_offs; |
| cur_offs += VIRTIO_DEV_OFFS_CONFIG; |
| cur_offs += num_vq * VIRTIO_VQCONFIG_LEN; |
| |
| /* Sync feature bitmap */ |
| stl_le_phys(cur_offs, dev->host_features); |
| |
| dev->feat_offs = cur_offs + dev->feat_len; |
| cur_offs += dev->feat_len * 2; |
| |
| /* Sync config space */ |
| if (dev->vdev->get_config) { |
| dev->vdev->get_config(dev->vdev, dev->vdev->config); |
| } |
| |
| cpu_physical_memory_write(cur_offs, |
| dev->vdev->config, dev->vdev->config_len); |
| cur_offs += dev->vdev->config_len; |
| } |
| |
| void s390_virtio_device_update_status(VirtIOS390Device *dev) |
| { |
| VirtIODevice *vdev = dev->vdev; |
| uint32_t features; |
| |
| virtio_set_status(vdev, ldub_phys(dev->dev_offs + VIRTIO_DEV_OFFS_STATUS)); |
| |
| /* Update guest supported feature bitmap */ |
| |
| features = bswap32(ldl_be_phys(dev->feat_offs)); |
| virtio_set_features(vdev, features); |
| } |
| |
| VirtIOS390Device *s390_virtio_bus_console(VirtIOS390Bus *bus) |
| { |
| return bus->console; |
| } |
| |
| /* Find a device by vring address */ |
| VirtIOS390Device *s390_virtio_bus_find_vring(VirtIOS390Bus *bus, |
| ram_addr_t mem, |
| int *vq_num) |
| { |
| VirtIOS390Device *_dev; |
| DeviceState *dev; |
| int i; |
| |
| QTAILQ_FOREACH(dev, &bus->bus.children, sibling) { |
| _dev = (VirtIOS390Device *)dev; |
| for(i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) { |
| if (!virtio_queue_get_addr(_dev->vdev, i)) |
| break; |
| if (virtio_queue_get_addr(_dev->vdev, i) == mem) { |
| if (vq_num) { |
| *vq_num = i; |
| } |
| return _dev; |
| } |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /* Find a device by device descriptor location */ |
| VirtIOS390Device *s390_virtio_bus_find_mem(VirtIOS390Bus *bus, ram_addr_t mem) |
| { |
| VirtIOS390Device *_dev; |
| DeviceState *dev; |
| |
| QTAILQ_FOREACH(dev, &bus->bus.children, sibling) { |
| _dev = (VirtIOS390Device *)dev; |
| if (_dev->dev_offs == mem) { |
| return _dev; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static void virtio_s390_notify(void *opaque, uint16_t vector) |
| { |
| VirtIOS390Device *dev = (VirtIOS390Device*)opaque; |
| uint64_t token = s390_virtio_device_vq_token(dev, vector); |
| CPUS390XState *env = s390_cpu_addr2state(0); |
| |
| s390_virtio_irq(env, 0, token); |
| } |
| |
| static unsigned virtio_s390_get_features(void *opaque) |
| { |
| VirtIOS390Device *dev = (VirtIOS390Device*)opaque; |
| return dev->host_features; |
| } |
| |
| /**************** S390 Virtio Bus Device Descriptions *******************/ |
| |
| static const VirtIOBindings virtio_s390_bindings = { |
| .notify = virtio_s390_notify, |
| .get_features = virtio_s390_get_features, |
| }; |
| |
| static Property s390_virtio_net_properties[] = { |
| DEFINE_NIC_PROPERTIES(VirtIOS390Device, nic), |
| DEFINE_PROP_UINT32("x-txtimer", VirtIOS390Device, |
| net.txtimer, TX_TIMER_INTERVAL), |
| DEFINE_PROP_INT32("x-txburst", VirtIOS390Device, |
| net.txburst, TX_BURST), |
| DEFINE_PROP_STRING("tx", VirtIOS390Device, net.tx), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void s390_virtio_net_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtIOS390DeviceClass *k = VIRTIO_S390_DEVICE_CLASS(klass); |
| |
| k->init = s390_virtio_net_init; |
| dc->props = s390_virtio_net_properties; |
| } |
| |
| static TypeInfo s390_virtio_net = { |
| .name = "virtio-net-s390", |
| .parent = TYPE_VIRTIO_S390_DEVICE, |
| .instance_size = sizeof(VirtIOS390Device), |
| .class_init = s390_virtio_net_class_init, |
| }; |
| |
| static Property s390_virtio_blk_properties[] = { |
| DEFINE_BLOCK_PROPERTIES(VirtIOS390Device, block), |
| DEFINE_PROP_STRING("serial", VirtIOS390Device, block_serial), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void s390_virtio_blk_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtIOS390DeviceClass *k = VIRTIO_S390_DEVICE_CLASS(klass); |
| |
| k->init = s390_virtio_blk_init; |
| dc->props = s390_virtio_blk_properties; |
| } |
| |
| static TypeInfo s390_virtio_blk = { |
| .name = "virtio-blk-s390", |
| .parent = TYPE_VIRTIO_S390_DEVICE, |
| .instance_size = sizeof(VirtIOS390Device), |
| .class_init = s390_virtio_blk_class_init, |
| }; |
| |
| static Property s390_virtio_serial_properties[] = { |
| DEFINE_PROP_UINT32("max_ports", VirtIOS390Device, |
| serial.max_virtserial_ports, 31), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void s390_virtio_serial_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtIOS390DeviceClass *k = VIRTIO_S390_DEVICE_CLASS(klass); |
| |
| k->init = s390_virtio_serial_init; |
| dc->props = s390_virtio_serial_properties; |
| } |
| |
| static TypeInfo s390_virtio_serial = { |
| .name = "virtio-serial-s390", |
| .parent = TYPE_VIRTIO_S390_DEVICE, |
| .instance_size = sizeof(VirtIOS390Device), |
| .class_init = s390_virtio_serial_class_init, |
| }; |
| |
| static int s390_virtio_busdev_init(DeviceState *dev) |
| { |
| VirtIOS390Device *_dev = (VirtIOS390Device *)dev; |
| VirtIOS390DeviceClass *_info = VIRTIO_S390_DEVICE_GET_CLASS(dev); |
| |
| return _info->init(_dev); |
| } |
| |
| static void virtio_s390_device_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->init = s390_virtio_busdev_init; |
| dc->bus_info = &s390_virtio_bus_info; |
| dc->unplug = qdev_simple_unplug_cb; |
| } |
| |
| static TypeInfo virtio_s390_device_info = { |
| .name = TYPE_VIRTIO_S390_DEVICE, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(VirtIOS390Device), |
| .class_init = virtio_s390_device_class_init, |
| .class_size = sizeof(VirtIOS390DeviceClass), |
| .abstract = true, |
| }; |
| |
| static Property s390_virtio_scsi_properties[] = { |
| DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOS390Device, host_features, scsi), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void s390_virtio_scsi_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtIOS390DeviceClass *k = VIRTIO_S390_DEVICE_CLASS(klass); |
| |
| k->init = s390_virtio_scsi_init; |
| dc->props = s390_virtio_scsi_properties; |
| } |
| |
| static TypeInfo s390_virtio_scsi = { |
| .name = "virtio-scsi-s390", |
| .parent = TYPE_VIRTIO_S390_DEVICE, |
| .instance_size = sizeof(VirtIOS390Device), |
| .class_init = s390_virtio_scsi_class_init, |
| }; |
| |
| /***************** S390 Virtio Bus Bridge Device *******************/ |
| /* Only required to have the virtio bus as child in the system bus */ |
| |
| static int s390_virtio_bridge_init(SysBusDevice *dev) |
| { |
| /* nothing */ |
| return 0; |
| } |
| |
| static void s390_virtio_bridge_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| |
| k->init = s390_virtio_bridge_init; |
| dc->no_user = 1; |
| } |
| |
| static TypeInfo s390_virtio_bridge_info = { |
| .name = "s390-virtio-bridge", |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(SysBusDevice), |
| .class_init = s390_virtio_bridge_class_init, |
| }; |
| |
| static void s390_virtio_register_types(void) |
| { |
| type_register_static(&virtio_s390_device_info); |
| type_register_static(&s390_virtio_serial); |
| type_register_static(&s390_virtio_blk); |
| type_register_static(&s390_virtio_net); |
| type_register_static(&s390_virtio_scsi); |
| type_register_static(&s390_virtio_bridge_info); |
| } |
| |
| type_init(s390_virtio_register_types) |