| /* |
| * QEMU PowerPC e500v2 ePAPR spinning code |
| * |
| * Copyright (C) 2011 Freescale Semiconductor, Inc. All rights reserved. |
| * |
| * Author: Alexander Graf, <agraf@suse.de> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * This code is not really a device, but models an interface that usually |
| * firmware takes care of. It's used when QEMU plays the role of firmware. |
| * |
| * Specification: |
| * |
| * https://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.1.pdf |
| * |
| */ |
| |
| #include "hw.h" |
| #include "sysemu.h" |
| #include "sysbus.h" |
| #include "kvm.h" |
| |
| #define MAX_CPUS 32 |
| |
| typedef struct spin_info { |
| uint64_t addr; |
| uint64_t r3; |
| uint32_t resv; |
| uint32_t pir; |
| uint64_t reserved; |
| } __attribute__ ((packed)) SpinInfo; |
| |
| typedef struct spin_state { |
| SysBusDevice busdev; |
| MemoryRegion iomem; |
| SpinInfo spin[MAX_CPUS]; |
| } SpinState; |
| |
| typedef struct spin_kick { |
| CPUPPCState *env; |
| SpinInfo *spin; |
| } SpinKick; |
| |
| static void spin_reset(void *opaque) |
| { |
| SpinState *s = opaque; |
| int i; |
| |
| for (i = 0; i < MAX_CPUS; i++) { |
| SpinInfo *info = &s->spin[i]; |
| |
| info->pir = i; |
| info->r3 = i; |
| info->addr = 1; |
| } |
| } |
| |
| /* Create -kernel TLB entries for BookE, linearly spanning 256MB. */ |
| static inline target_phys_addr_t booke206_page_size_to_tlb(uint64_t size) |
| { |
| return (ffs(size >> 10) - 1) >> 1; |
| } |
| |
| static void mmubooke_create_initial_mapping(CPUPPCState *env, |
| target_ulong va, |
| target_phys_addr_t pa, |
| target_phys_addr_t len) |
| { |
| ppcmas_tlb_t *tlb = booke206_get_tlbm(env, 1, 0, 1); |
| target_phys_addr_t size; |
| |
| size = (booke206_page_size_to_tlb(len) << MAS1_TSIZE_SHIFT); |
| tlb->mas1 = MAS1_VALID | size; |
| tlb->mas2 = (va & TARGET_PAGE_MASK) | MAS2_M; |
| tlb->mas7_3 = pa & TARGET_PAGE_MASK; |
| tlb->mas7_3 |= MAS3_UR | MAS3_UW | MAS3_UX | MAS3_SR | MAS3_SW | MAS3_SX; |
| } |
| |
| static void spin_kick(void *data) |
| { |
| SpinKick *kick = data; |
| CPUPPCState *env = kick->env; |
| SpinInfo *curspin = kick->spin; |
| target_phys_addr_t map_size = 64 * 1024 * 1024; |
| target_phys_addr_t map_start; |
| |
| cpu_synchronize_state(env); |
| stl_p(&curspin->pir, env->spr[SPR_PIR]); |
| env->nip = ldq_p(&curspin->addr) & (map_size - 1); |
| env->gpr[3] = ldq_p(&curspin->r3); |
| env->gpr[4] = 0; |
| env->gpr[5] = 0; |
| env->gpr[6] = 0; |
| env->gpr[7] = map_size; |
| env->gpr[8] = 0; |
| env->gpr[9] = 0; |
| |
| map_start = ldq_p(&curspin->addr) & ~(map_size - 1); |
| mmubooke_create_initial_mapping(env, 0, map_start, map_size); |
| |
| env->halted = 0; |
| env->exception_index = -1; |
| env->stopped = 0; |
| qemu_cpu_kick(env); |
| } |
| |
| static void spin_write(void *opaque, target_phys_addr_t addr, uint64_t value, |
| unsigned len) |
| { |
| SpinState *s = opaque; |
| int env_idx = addr / sizeof(SpinInfo); |
| CPUPPCState *env; |
| SpinInfo *curspin = &s->spin[env_idx]; |
| uint8_t *curspin_p = (uint8_t*)curspin; |
| |
| for (env = first_cpu; env != NULL; env = env->next_cpu) { |
| if (env->cpu_index == env_idx) { |
| break; |
| } |
| } |
| |
| if (!env) { |
| /* Unknown CPU */ |
| return; |
| } |
| |
| if (!env->cpu_index) { |
| /* primary CPU doesn't spin */ |
| return; |
| } |
| |
| curspin_p = &curspin_p[addr % sizeof(SpinInfo)]; |
| switch (len) { |
| case 1: |
| stb_p(curspin_p, value); |
| break; |
| case 2: |
| stw_p(curspin_p, value); |
| break; |
| case 4: |
| stl_p(curspin_p, value); |
| break; |
| } |
| |
| if (!(ldq_p(&curspin->addr) & 1)) { |
| /* run CPU */ |
| SpinKick kick = { |
| .env = env, |
| .spin = curspin, |
| }; |
| |
| run_on_cpu(env, spin_kick, &kick); |
| } |
| } |
| |
| static uint64_t spin_read(void *opaque, target_phys_addr_t addr, unsigned len) |
| { |
| SpinState *s = opaque; |
| uint8_t *spin_p = &((uint8_t*)s->spin)[addr]; |
| |
| switch (len) { |
| case 1: |
| return ldub_p(spin_p); |
| case 2: |
| return lduw_p(spin_p); |
| case 4: |
| return ldl_p(spin_p); |
| default: |
| assert(0); |
| } |
| } |
| |
| static const MemoryRegionOps spin_rw_ops = { |
| .read = spin_read, |
| .write = spin_write, |
| .endianness = DEVICE_BIG_ENDIAN, |
| }; |
| |
| static int ppce500_spin_initfn(SysBusDevice *dev) |
| { |
| SpinState *s; |
| |
| s = FROM_SYSBUS(SpinState, sysbus_from_qdev(dev)); |
| |
| memory_region_init_io(&s->iomem, &spin_rw_ops, s, "e500 spin pv device", |
| sizeof(SpinInfo) * MAX_CPUS); |
| sysbus_init_mmio(dev, &s->iomem); |
| |
| qemu_register_reset(spin_reset, s); |
| |
| return 0; |
| } |
| |
| static void ppce500_spin_class_init(ObjectClass *klass, void *data) |
| { |
| SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| |
| k->init = ppce500_spin_initfn; |
| } |
| |
| static TypeInfo ppce500_spin_info = { |
| .name = "e500-spin", |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(SpinState), |
| .class_init = ppce500_spin_class_init, |
| }; |
| |
| static void ppce500_spin_register_types(void) |
| { |
| type_register_static(&ppce500_spin_info); |
| } |
| |
| type_init(ppce500_spin_register_types) |