| QA output created by 051 |
| Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 |
| |
| === Unknown option === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt= |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt' |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt' |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt' |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt' |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| |
| === Enable and disable lazy refcounting on the command line, plus some invalid values === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=on |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=off |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts= |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=: Parameter 'lazy_refcounts' expects 'on' or 'off' |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=42 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=42: Parameter 'lazy_refcounts' expects 'on' or 'off' |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=42: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=foo |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=foo: Parameter 'lazy_refcounts' expects 'on' or 'off' |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=foo: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| |
| === With version 2 images enabling lazy refcounts must fail === |
| |
| Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=on |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=on: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=off |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| |
| === No medium === |
| |
| Testing: -drive if=floppy |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive if=ide,media=cdrom |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive if=scsi,media=cdrom |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive if=ide |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: Device needs media, but drive is empty |
| QEMU_PROG: Device initialization failed. |
| QEMU_PROG: Initialization of device ide-hd failed |
| |
| Testing: -drive if=virtio |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty |
| QEMU_PROG: -drive if=virtio: Device initialization failed. |
| QEMU_PROG: -drive if=virtio: Device initialization failed. |
| QEMU_PROG: -drive if=virtio: Device 'virtio-blk-pci' could not be initialized |
| |
| Testing: -drive if=scsi |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty |
| QEMU_PROG: -drive if=scsi: Device initialization failed. |
| QEMU_PROG: Device initialization failed. |
| QEMU_PROG: Initialization of device lsi53c895a failed |
| |
| Testing: -drive if=none,id=disk -device ide-cd,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive if=none,id=disk -device ide-drive,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty |
| QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed. |
| QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized |
| |
| Testing: -drive if=none,id=disk -device ide-hd,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty |
| QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed. |
| QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized |
| |
| Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty |
| QEMU_PROG: -device scsi-disk,drive=disk: Device initialization failed. |
| QEMU_PROG: -device scsi-disk,drive=disk: Device 'scsi-disk' could not be initialized |
| |
| Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty |
| QEMU_PROG: -device scsi-hd,drive=disk: Device initialization failed. |
| QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be initialized |
| |
| |
| === Read-only === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on: readonly not supported by this bus type |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive |
| QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed. |
| QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive |
| QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed. |
| QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| |
| === Cache modes === |
| |
| Testing: -drive media=cdrom,cache=none |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive media=cdrom,cache=directsync |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive media=cdrom,cache=writeback |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive media=cdrom,cache=writethrough |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive media=cdrom,cache=unsafe |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive media=cdrom,cache=invalid_value |
| QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid cache option |
| |
| |
| === Specifying the protocol layer === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file |
| QEMU 1.5.50 monitor - type 'help' for more information
|
| (qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
|
| |
| Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: Can't use 'qcow2' as a block driver for the protocol level |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: could not open disk image TEST_DIR/t.qcow2: Invalid argument |
| |
| |
| === Parsing protocol from file name === |
| |
| Testing: -hda foo:bar |
| QEMU_PROG: -hda foo:bar: Unknown protocol |
| QEMU_PROG: -hda foo:bar: could not open disk image foo:bar: No such file or directory |
| |
| Testing: -drive file=foo:bar |
| QEMU_PROG: -drive file=foo:bar: Unknown protocol |
| QEMU_PROG: -drive file=foo:bar: could not open disk image foo:bar: No such file or directory |
| |
| Testing: -drive file.filename=foo:bar |
| QEMU_PROG: -drive file.filename=foo:bar: could not open disk image ide0-hd0: No such file or directory |
| |
| *** done |