| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2008 Semihalf |
| * |
| * (C) Copyright 2000-2005 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| ******************************************************************** |
| * NOTE: This header file defines an interface to U-Boot. Including |
| * this (unmodified) header file in another file is considered normal |
| * use of U-Boot, and does *not* fall under the heading of "derived |
| * work". |
| ******************************************************************** |
| */ |
| |
| #ifndef UBOOT_IMAGE_H |
| #define UBOOT_IMAGE_H |
| |
| /* |
| * Operating System Codes |
| * |
| * The following are exposed to uImage header. |
| * New IDs *MUST* be appended at the end of the list and *NEVER* |
| * inserted for backward compatibility. |
| */ |
| enum { |
| IH_OS_INVALID = 0, /* Invalid OS */ |
| IH_OS_OPENBSD, /* OpenBSD */ |
| IH_OS_NETBSD, /* NetBSD */ |
| IH_OS_FREEBSD, /* FreeBSD */ |
| IH_OS_4_4BSD, /* 4.4BSD */ |
| IH_OS_LINUX, /* Linux */ |
| IH_OS_SVR4, /* SVR4 */ |
| IH_OS_ESIX, /* Esix */ |
| IH_OS_SOLARIS, /* Solaris */ |
| IH_OS_IRIX, /* Irix */ |
| IH_OS_SCO, /* SCO */ |
| IH_OS_DELL, /* Dell */ |
| IH_OS_NCR, /* NCR */ |
| IH_OS_LYNXOS, /* LynxOS */ |
| IH_OS_VXWORKS, /* VxWorks */ |
| IH_OS_PSOS, /* pSOS */ |
| IH_OS_QNX, /* QNX */ |
| IH_OS_U_BOOT, /* Firmware */ |
| IH_OS_RTEMS, /* RTEMS */ |
| IH_OS_ARTOS, /* ARTOS */ |
| IH_OS_UNITY, /* Unity OS */ |
| IH_OS_INTEGRITY, /* INTEGRITY */ |
| IH_OS_OSE, /* OSE */ |
| IH_OS_PLAN9, /* Plan 9 */ |
| IH_OS_OPENRTOS, /* OpenRTOS */ |
| IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */ |
| IH_OS_TEE, /* Trusted Execution Environment */ |
| IH_OS_OPENSBI, /* RISC-V OpenSBI */ |
| IH_OS_EFI, /* EFI Firmware (e.g. GRUB2) */ |
| |
| IH_OS_COUNT, |
| }; |
| |
| /* |
| * CPU Architecture Codes (supported by Linux) |
| * |
| * The following are exposed to uImage header. |
| * New IDs *MUST* be appended at the end of the list and *NEVER* |
| * inserted for backward compatibility. |
| */ |
| enum { |
| IH_ARCH_INVALID = 0, /* Invalid CPU */ |
| IH_ARCH_ALPHA, /* Alpha */ |
| IH_ARCH_ARM, /* ARM */ |
| IH_ARCH_I386, /* Intel x86 */ |
| IH_ARCH_IA64, /* IA64 */ |
| IH_ARCH_MIPS, /* MIPS */ |
| IH_ARCH_MIPS64, /* MIPS 64 Bit */ |
| IH_ARCH_PPC, /* PowerPC */ |
| IH_ARCH_S390, /* IBM S390 */ |
| IH_ARCH_SH, /* SuperH */ |
| IH_ARCH_SPARC, /* Sparc */ |
| IH_ARCH_SPARC64, /* Sparc 64 Bit */ |
| IH_ARCH_M68K, /* M68K */ |
| IH_ARCH_NIOS, /* Nios-32 */ |
| IH_ARCH_MICROBLAZE, /* MicroBlaze */ |
| IH_ARCH_NIOS2, /* Nios-II */ |
| IH_ARCH_BLACKFIN, /* Blackfin */ |
| IH_ARCH_AVR32, /* AVR32 */ |
| IH_ARCH_ST200, /* STMicroelectronics ST200 */ |
| IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */ |
| IH_ARCH_NDS32, /* ANDES Technology - NDS32 */ |
| IH_ARCH_OPENRISC, /* OpenRISC 1000 */ |
| IH_ARCH_ARM64, /* ARM64 */ |
| IH_ARCH_ARC, /* Synopsys DesignWare ARC */ |
| IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */ |
| IH_ARCH_XTENSA, /* Xtensa */ |
| IH_ARCH_RISCV, /* RISC-V */ |
| |
| IH_ARCH_COUNT, |
| }; |
| |
| /* |
| * Image Types |
| * |
| * "Standalone Programs" are directly runnable in the environment |
| * provided by U-Boot; it is expected that (if they behave |
| * well) you can continue to work in U-Boot after return from |
| * the Standalone Program. |
| * "OS Kernel Images" are usually images of some Embedded OS which |
| * will take over control completely. Usually these programs |
| * will install their own set of exception handlers, device |
| * drivers, set up the MMU, etc. - this means, that you cannot |
| * expect to re-enter U-Boot except by resetting the CPU. |
| * "RAMDisk Images" are more or less just data blocks, and their |
| * parameters (address, size) are passed to an OS kernel that is |
| * being started. |
| * "Multi-File Images" contain several images, typically an OS |
| * (Linux) kernel image and one or more data images like |
| * RAMDisks. This construct is useful for instance when you want |
| * to boot over the network using BOOTP etc., where the boot |
| * server provides just a single image file, but you want to get |
| * for instance an OS kernel and a RAMDisk image. |
| * |
| * "Multi-File Images" start with a list of image sizes, each |
| * image size (in bytes) specified by an "uint32_t" in network |
| * byte order. This list is terminated by an "(uint32_t)0". |
| * Immediately after the terminating 0 follow the images, one by |
| * one, all aligned on "uint32_t" boundaries (size rounded up to |
| * a multiple of 4 bytes - except for the last file). |
| * |
| * "Firmware Images" are binary images containing firmware (like |
| * U-Boot or FPGA images) which usually will be programmed to |
| * flash memory. |
| * |
| * "Script files" are command sequences that will be executed by |
| * U-Boot's command interpreter; this feature is especially |
| * useful when you configure U-Boot to use a real shell (hush) |
| * as command interpreter (=> Shell Scripts). |
| * |
| * The following are exposed to uImage header. |
| * New IDs *MUST* be appended at the end of the list and *NEVER* |
| * inserted for backward compatibility. |
| */ |
| |
| enum { |
| IH_TYPE_INVALID = 0, /* Invalid Image */ |
| IH_TYPE_STANDALONE, /* Standalone Program */ |
| IH_TYPE_KERNEL, /* OS Kernel Image */ |
| IH_TYPE_RAMDISK, /* RAMDisk Image */ |
| IH_TYPE_MULTI, /* Multi-File Image */ |
| IH_TYPE_FIRMWARE, /* Firmware Image */ |
| IH_TYPE_SCRIPT, /* Script file */ |
| IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */ |
| IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */ |
| IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */ |
| IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */ |
| IH_TYPE_UBLIMAGE, /* Davinci UBL Image */ |
| IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */ |
| IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */ |
| /* OS Kernel Image, can run from any load address */ |
| IH_TYPE_KERNEL_NOLOAD, |
| IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */ |
| IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */ |
| IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */ |
| IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */ |
| IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA CV/AV Preloader */ |
| IH_TYPE_X86_SETUP, /* x86 setup.bin Image */ |
| IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */ |
| IH_TYPE_LOADABLE, /* A list of typeless images */ |
| IH_TYPE_RKIMAGE, /* Rockchip Boot Image */ |
| IH_TYPE_RKSD, /* Rockchip SD card */ |
| IH_TYPE_RKSPI, /* Rockchip SPI image */ |
| IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */ |
| IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */ |
| IH_TYPE_ZYNQMPBIF, /* Xilinx ZynqMP Boot Image (bif) */ |
| IH_TYPE_FPGA, /* FPGA Image */ |
| IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */ |
| IH_TYPE_TEE, /* Trusted Execution Environment OS Image */ |
| IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */ |
| IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */ |
| IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */ |
| IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */ |
| IH_TYPE_MTKIMAGE, /* MediaTek BootROM loadable Image */ |
| IH_TYPE_IMX8MIMAGE, /* Freescale IMX8MBoot Image */ |
| IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */ |
| IH_TYPE_COPRO, /* Coprocessor Image for remoteproc*/ |
| IH_TYPE_SUNXI_EGON, /* Allwinner eGON Boot Image */ |
| |
| IH_TYPE_COUNT, /* Number of image types */ |
| }; |
| |
| /* |
| * Compression Types |
| * |
| * The following are exposed to uImage header. |
| * New IDs *MUST* be appended at the end of the list and *NEVER* |
| * inserted for backward compatibility. |
| */ |
| enum { |
| IH_COMP_NONE = 0, /* No Compression Used */ |
| IH_COMP_GZIP, /* gzip Compression Used */ |
| IH_COMP_BZIP2, /* bzip2 Compression Used */ |
| IH_COMP_LZMA, /* lzma Compression Used */ |
| IH_COMP_LZO, /* lzo Compression Used */ |
| IH_COMP_LZ4, /* lz4 Compression Used */ |
| IH_COMP_ZSTD, /* zstd Compression Used */ |
| |
| IH_COMP_COUNT, |
| }; |
| |
| #define IH_MAGIC 0x27051956 /* Image Magic Number */ |
| #define IH_NMLEN 32 /* Image Name Length */ |
| |
| /* |
| * Legacy format image header, |
| * all data in network byte order (aka natural aka bigendian). |
| */ |
| typedef struct uboot_image_header { |
| uint32_t ih_magic; /* Image Header Magic Number */ |
| uint32_t ih_hcrc; /* Image Header CRC Checksum */ |
| uint32_t ih_time; /* Image Creation Timestamp */ |
| uint32_t ih_size; /* Image Data Size */ |
| uint32_t ih_load; /* Data Load Address */ |
| uint32_t ih_ep; /* Entry Point Address */ |
| uint32_t ih_dcrc; /* Image Data CRC Checksum */ |
| uint8_t ih_os; /* Operating System */ |
| uint8_t ih_arch; /* CPU architecture */ |
| uint8_t ih_type; /* Image Type */ |
| uint8_t ih_comp; /* Compression Type */ |
| uint8_t ih_name[IH_NMLEN]; /* Image Name */ |
| } uboot_image_header_t; |
| |
| |
| #endif /* UBOOT_IMAGE_H */ |
