| /* |
| * QEMU USB emulation |
| * |
| * Copyright (c) 2005 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "vl.h" |
| |
| void usb_attach(USBPort *port, USBDevice *dev) |
| { |
| port->attach(port, dev); |
| } |
| |
| /**********************/ |
| /* generic USB device helpers (you are not forced to use them when |
| writing your USB device driver, but they help handling the |
| protocol) |
| */ |
| |
| #define SETUP_STATE_IDLE 0 |
| #define SETUP_STATE_DATA 1 |
| #define SETUP_STATE_ACK 2 |
| |
| int usb_generic_handle_packet(USBDevice *s, USBPacket *p) |
| { |
| int l, ret = 0; |
| int len = p->len; |
| uint8_t *data = p->data; |
| |
| switch(p->pid) { |
| case USB_MSG_ATTACH: |
| s->state = USB_STATE_ATTACHED; |
| break; |
| case USB_MSG_DETACH: |
| s->state = USB_STATE_NOTATTACHED; |
| break; |
| case USB_MSG_RESET: |
| s->remote_wakeup = 0; |
| s->addr = 0; |
| s->state = USB_STATE_DEFAULT; |
| s->handle_reset(s); |
| break; |
| case USB_TOKEN_SETUP: |
| if (s->state < USB_STATE_DEFAULT || p->devaddr != s->addr) |
| return USB_RET_NODEV; |
| if (len != 8) |
| goto fail; |
| memcpy(s->setup_buf, data, 8); |
| s->setup_len = (s->setup_buf[7] << 8) | s->setup_buf[6]; |
| s->setup_index = 0; |
| if (s->setup_buf[0] & USB_DIR_IN) { |
| ret = s->handle_control(s, |
| (s->setup_buf[0] << 8) | s->setup_buf[1], |
| (s->setup_buf[3] << 8) | s->setup_buf[2], |
| (s->setup_buf[5] << 8) | s->setup_buf[4], |
| s->setup_len, |
| s->data_buf); |
| if (ret < 0) |
| return ret; |
| if (ret < s->setup_len) |
| s->setup_len = ret; |
| s->setup_state = SETUP_STATE_DATA; |
| } else { |
| if (s->setup_len == 0) |
| s->setup_state = SETUP_STATE_ACK; |
| else |
| s->setup_state = SETUP_STATE_DATA; |
| } |
| break; |
| case USB_TOKEN_IN: |
| if (s->state < USB_STATE_DEFAULT || p->devaddr != s->addr) |
| return USB_RET_NODEV; |
| switch(p->devep) { |
| case 0: |
| switch(s->setup_state) { |
| case SETUP_STATE_ACK: |
| if (!(s->setup_buf[0] & USB_DIR_IN)) { |
| s->setup_state = SETUP_STATE_IDLE; |
| ret = s->handle_control(s, |
| (s->setup_buf[0] << 8) | s->setup_buf[1], |
| (s->setup_buf[3] << 8) | s->setup_buf[2], |
| (s->setup_buf[5] << 8) | s->setup_buf[4], |
| s->setup_len, |
| s->data_buf); |
| if (ret > 0) |
| ret = 0; |
| } else { |
| /* return 0 byte */ |
| } |
| break; |
| case SETUP_STATE_DATA: |
| if (s->setup_buf[0] & USB_DIR_IN) { |
| l = s->setup_len - s->setup_index; |
| if (l > len) |
| l = len; |
| memcpy(data, s->data_buf + s->setup_index, l); |
| s->setup_index += l; |
| if (s->setup_index >= s->setup_len) |
| s->setup_state = SETUP_STATE_ACK; |
| ret = l; |
| } else { |
| s->setup_state = SETUP_STATE_IDLE; |
| goto fail; |
| } |
| break; |
| default: |
| goto fail; |
| } |
| break; |
| default: |
| ret = s->handle_data(s, p); |
| break; |
| } |
| break; |
| case USB_TOKEN_OUT: |
| if (s->state < USB_STATE_DEFAULT || p->devaddr != s->addr) |
| return USB_RET_NODEV; |
| switch(p->devep) { |
| case 0: |
| switch(s->setup_state) { |
| case SETUP_STATE_ACK: |
| if (s->setup_buf[0] & USB_DIR_IN) { |
| s->setup_state = SETUP_STATE_IDLE; |
| /* transfer OK */ |
| } else { |
| /* ignore additional output */ |
| } |
| break; |
| case SETUP_STATE_DATA: |
| if (!(s->setup_buf[0] & USB_DIR_IN)) { |
| l = s->setup_len - s->setup_index; |
| if (l > len) |
| l = len; |
| memcpy(s->data_buf + s->setup_index, data, l); |
| s->setup_index += l; |
| if (s->setup_index >= s->setup_len) |
| s->setup_state = SETUP_STATE_ACK; |
| ret = l; |
| } else { |
| s->setup_state = SETUP_STATE_IDLE; |
| goto fail; |
| } |
| break; |
| default: |
| goto fail; |
| } |
| break; |
| default: |
| ret = s->handle_data(s, p); |
| break; |
| } |
| break; |
| default: |
| fail: |
| ret = USB_RET_STALL; |
| break; |
| } |
| return ret; |
| } |
| |
| /* XXX: fix overflow */ |
| int set_usb_string(uint8_t *buf, const char *str) |
| { |
| int len, i; |
| uint8_t *q; |
| |
| q = buf; |
| len = strlen(str); |
| *q++ = 2 * len + 2; |
| *q++ = 3; |
| for(i = 0; i < len; i++) { |
| *q++ = str[i]; |
| *q++ = 0; |
| } |
| return q - buf; |
| } |
| |
| /* Send an internal message to a USB device. */ |
| void usb_send_msg(USBDevice *dev, int msg) |
| { |
| USBPacket p; |
| memset(&p, 0, sizeof(p)); |
| p.pid = msg; |
| dev->handle_packet(dev, &p); |
| } |
| |