| /* |
| * bcm2708 aka bcm2835/2836 aka Raspberry Pi/Pi2 SoC platform defines |
| * |
| * These definitions are derived from those in Raspbian Linux at |
| * arch/arm/mach-{bcm2708,bcm2709}/include/mach/platform.h |
| * where they carry the following notice: |
| * |
| * Copyright (C) 2010 Broadcom |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #define MCORE_OFFSET 0x0000 /* Fake frame buffer device |
| * (the multicore sync block) */ |
| #define IC0_OFFSET 0x2000 |
| #define ST_OFFSET 0x3000 /* System Timer */ |
| #define MPHI_OFFSET 0x6000 /* Message-based Parallel Host Intf. */ |
| #define DMA_OFFSET 0x7000 /* DMA controller, channels 0-14 */ |
| #define ARM_OFFSET 0xB000 /* BCM2708 ARM control block */ |
| #define ARMCTRL_OFFSET (ARM_OFFSET + 0x000) |
| #define ARMCTRL_IC_OFFSET (ARM_OFFSET + 0x200) /* Interrupt controller */ |
| #define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 */ |
| #define ARMCTRL_0_SBM_OFFSET (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores |
| * Doorbells & Mailboxes */ |
| #define PM_OFFSET 0x100000 /* Power Management, Reset controller |
| * and Watchdog registers */ |
| #define PCM_CLOCK_OFFSET 0x101098 |
| #define RNG_OFFSET 0x104000 |
| #define GPIO_OFFSET 0x200000 |
| #define UART0_OFFSET 0x201000 |
| #define MMCI0_OFFSET 0x202000 |
| #define I2S_OFFSET 0x203000 |
| #define SPI0_OFFSET 0x204000 |
| #define BSC0_OFFSET 0x205000 /* BSC0 I2C/TWI */ |
| #define UART1_OFFSET 0x215000 |
| #define EMMC_OFFSET 0x300000 |
| #define SMI_OFFSET 0x600000 |
| #define BSC1_OFFSET 0x804000 /* BSC1 I2C/TWI */ |
| #define USB_OFFSET 0x980000 /* DTC_OTG USB controller */ |
| #define DMA15_OFFSET 0xE05000 /* DMA controller, channel 15 */ |
| |
| /* GPU interrupts */ |
| #define INTERRUPT_TIMER0 0 |
| #define INTERRUPT_TIMER1 1 |
| #define INTERRUPT_TIMER2 2 |
| #define INTERRUPT_TIMER3 3 |
| #define INTERRUPT_CODEC0 4 |
| #define INTERRUPT_CODEC1 5 |
| #define INTERRUPT_CODEC2 6 |
| #define INTERRUPT_JPEG 7 |
| #define INTERRUPT_ISP 8 |
| #define INTERRUPT_USB 9 |
| #define INTERRUPT_3D 10 |
| #define INTERRUPT_TRANSPOSER 11 |
| #define INTERRUPT_MULTICORESYNC0 12 |
| #define INTERRUPT_MULTICORESYNC1 13 |
| #define INTERRUPT_MULTICORESYNC2 14 |
| #define INTERRUPT_MULTICORESYNC3 15 |
| #define INTERRUPT_DMA0 16 |
| #define INTERRUPT_DMA1 17 |
| #define INTERRUPT_DMA2 18 |
| #define INTERRUPT_DMA3 19 |
| #define INTERRUPT_DMA4 20 |
| #define INTERRUPT_DMA5 21 |
| #define INTERRUPT_DMA6 22 |
| #define INTERRUPT_DMA7 23 |
| #define INTERRUPT_DMA8 24 |
| #define INTERRUPT_DMA9 25 |
| #define INTERRUPT_DMA10 26 |
| #define INTERRUPT_DMA11 27 |
| #define INTERRUPT_DMA12 28 |
| #define INTERRUPT_AUX 29 |
| #define INTERRUPT_ARM 30 |
| #define INTERRUPT_VPUDMA 31 |
| #define INTERRUPT_HOSTPORT 32 |
| #define INTERRUPT_VIDEOSCALER 33 |
| #define INTERRUPT_CCP2TX 34 |
| #define INTERRUPT_SDC 35 |
| #define INTERRUPT_DSI0 36 |
| #define INTERRUPT_AVE 37 |
| #define INTERRUPT_CAM0 38 |
| #define INTERRUPT_CAM1 39 |
| #define INTERRUPT_HDMI0 40 |
| #define INTERRUPT_HDMI1 41 |
| #define INTERRUPT_PIXELVALVE1 42 |
| #define INTERRUPT_I2CSPISLV 43 |
| #define INTERRUPT_DSI1 44 |
| #define INTERRUPT_PWA0 45 |
| #define INTERRUPT_PWA1 46 |
| #define INTERRUPT_CPR 47 |
| #define INTERRUPT_SMI 48 |
| #define INTERRUPT_GPIO0 49 |
| #define INTERRUPT_GPIO1 50 |
| #define INTERRUPT_GPIO2 51 |
| #define INTERRUPT_GPIO3 52 |
| #define INTERRUPT_I2C 53 |
| #define INTERRUPT_SPI 54 |
| #define INTERRUPT_I2SPCM 55 |
| #define INTERRUPT_SDIO 56 |
| #define INTERRUPT_UART 57 |
| #define INTERRUPT_SLIMBUS 58 |
| #define INTERRUPT_VEC 59 |
| #define INTERRUPT_CPG 60 |
| #define INTERRUPT_RNG 61 |
| #define INTERRUPT_ARASANSDIO 62 |
| #define INTERRUPT_AVSPMON 63 |
| |
| /* ARM CPU IRQs use a private number space */ |
| #define INTERRUPT_ARM_TIMER 0 |
| #define INTERRUPT_ARM_MAILBOX 1 |
| #define INTERRUPT_ARM_DOORBELL_0 2 |
| #define INTERRUPT_ARM_DOORBELL_1 3 |
| #define INTERRUPT_VPU0_HALTED 4 |
| #define INTERRUPT_VPU1_HALTED 5 |
| #define INTERRUPT_ILLEGAL_TYPE0 6 |
| #define INTERRUPT_ILLEGAL_TYPE1 7 |