| /* |
| * MAX7310 8-port GPIO expansion chip. |
| * |
| * Copyright (c) 2006 Openedhand Ltd. |
| * Written by Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This file is licensed under GNU GPL. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/i2c/i2c.h" |
| #include "hw/irq.h" |
| #include "migration/vmstate.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qom/object.h" |
| |
| #define TYPE_MAX7310 "max7310" |
| OBJECT_DECLARE_SIMPLE_TYPE(MAX7310State, MAX7310) |
| |
| struct MAX7310State { |
| I2CSlave parent_obj; |
| |
| int i2c_command_byte; |
| int len; |
| |
| uint8_t level; |
| uint8_t direction; |
| uint8_t polarity; |
| uint8_t status; |
| uint8_t command; |
| qemu_irq handler[8]; |
| qemu_irq *gpio_in; |
| }; |
| |
| static void max7310_reset(DeviceState *dev) |
| { |
| MAX7310State *s = MAX7310(dev); |
| |
| s->level &= s->direction; |
| s->direction = 0xff; |
| s->polarity = 0xf0; |
| s->status = 0x01; |
| s->command = 0x00; |
| } |
| |
| static uint8_t max7310_rx(I2CSlave *i2c) |
| { |
| MAX7310State *s = MAX7310(i2c); |
| |
| switch (s->command) { |
| case 0x00: /* Input port */ |
| return s->level ^ s->polarity; |
| |
| case 0x01: /* Output port */ |
| return s->level & ~s->direction; |
| |
| case 0x02: /* Polarity inversion */ |
| return s->polarity; |
| |
| case 0x03: /* Configuration */ |
| return s->direction; |
| |
| case 0x04: /* Timeout */ |
| return s->status; |
| |
| case 0xff: /* Reserved */ |
| return 0xff; |
| |
| default: |
| qemu_log_mask(LOG_UNIMP, "%s: Unsupported register 0x02%" PRIx8 "\n", |
| __func__, s->command); |
| break; |
| } |
| return 0xff; |
| } |
| |
| static int max7310_tx(I2CSlave *i2c, uint8_t data) |
| { |
| MAX7310State *s = MAX7310(i2c); |
| uint8_t diff; |
| int line; |
| |
| if (s->len ++ > 1) { |
| #ifdef VERBOSE |
| printf("%s: message too long (%i bytes)\n", __func__, s->len); |
| #endif |
| return 1; |
| } |
| |
| if (s->i2c_command_byte) { |
| s->command = data; |
| s->i2c_command_byte = 0; |
| return 0; |
| } |
| |
| switch (s->command) { |
| case 0x01: /* Output port */ |
| for (diff = (data ^ s->level) & ~s->direction; diff; |
| diff &= ~(1 << line)) { |
| line = ctz32(diff); |
| if (s->handler[line]) |
| qemu_set_irq(s->handler[line], (data >> line) & 1); |
| } |
| s->level = (s->level & s->direction) | (data & ~s->direction); |
| break; |
| |
| case 0x02: /* Polarity inversion */ |
| s->polarity = data; |
| break; |
| |
| case 0x03: /* Configuration */ |
| s->level &= ~(s->direction ^ data); |
| s->direction = data; |
| break; |
| |
| case 0x04: /* Timeout */ |
| s->status = data; |
| break; |
| |
| case 0x00: /* Input port - ignore writes */ |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "%s: Unsupported register 0x02%" PRIx8 "\n", |
| __func__, s->command); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int max7310_event(I2CSlave *i2c, enum i2c_event event) |
| { |
| MAX7310State *s = MAX7310(i2c); |
| s->len = 0; |
| |
| switch (event) { |
| case I2C_START_SEND: |
| s->i2c_command_byte = 1; |
| break; |
| case I2C_FINISH: |
| #ifdef VERBOSE |
| if (s->len == 1) |
| printf("%s: message too short (%i bytes)\n", __func__, s->len); |
| #endif |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_max7310 = { |
| .name = "max7310", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (const VMStateField[]) { |
| VMSTATE_INT32(i2c_command_byte, MAX7310State), |
| VMSTATE_INT32(len, MAX7310State), |
| VMSTATE_UINT8(level, MAX7310State), |
| VMSTATE_UINT8(direction, MAX7310State), |
| VMSTATE_UINT8(polarity, MAX7310State), |
| VMSTATE_UINT8(status, MAX7310State), |
| VMSTATE_UINT8(command, MAX7310State), |
| VMSTATE_I2C_SLAVE(parent_obj, MAX7310State), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void max7310_gpio_set(void *opaque, int line, int level) |
| { |
| MAX7310State *s = (MAX7310State *) opaque; |
| assert(line >= 0 && line < ARRAY_SIZE(s->handler)); |
| |
| if (level) |
| s->level |= s->direction & (1 << line); |
| else |
| s->level &= ~(s->direction & (1 << line)); |
| } |
| |
| /* MAX7310 is SMBus-compatible (can be used with only SMBus protocols), |
| * but also accepts sequences that are not SMBus so return an I2C device. */ |
| static void max7310_realize(DeviceState *dev, Error **errp) |
| { |
| MAX7310State *s = MAX7310(dev); |
| |
| qdev_init_gpio_in(dev, max7310_gpio_set, ARRAY_SIZE(s->handler)); |
| qdev_init_gpio_out(dev, s->handler, ARRAY_SIZE(s->handler)); |
| } |
| |
| static void max7310_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); |
| |
| dc->realize = max7310_realize; |
| k->event = max7310_event; |
| k->recv = max7310_rx; |
| k->send = max7310_tx; |
| device_class_set_legacy_reset(dc, max7310_reset); |
| dc->vmsd = &vmstate_max7310; |
| } |
| |
| static const TypeInfo max7310_info = { |
| .name = TYPE_MAX7310, |
| .parent = TYPE_I2C_SLAVE, |
| .instance_size = sizeof(MAX7310State), |
| .class_init = max7310_class_init, |
| }; |
| |
| static void max7310_register_types(void) |
| { |
| type_register_static(&max7310_info); |
| } |
| |
| type_init(max7310_register_types) |