| /* |
| * QEMU SiFive U OTP (One-Time Programmable) Memory interface |
| * |
| * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com> |
| * |
| * Simple model of the OTP to emulate register reads made by the SDK BSP |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/qdev-properties-system.h" |
| #include "hw/sysbus.h" |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "hw/misc/sifive_u_otp.h" |
| #include "sysemu/blockdev.h" |
| #include "sysemu/block-backend.h" |
| |
| #define WRITTEN_BIT_ON 0x1 |
| |
| #define SET_FUSEARRAY_BIT(map, i, off, bit) \ |
| map[i] = bit ? (map[i] | bit << off) : (map[i] & ~(0x1 << off)) |
| |
| #define GET_FUSEARRAY_BIT(map, i, off) \ |
| ((map[i] >> off) & 0x1) |
| |
| static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int size) |
| { |
| SiFiveUOTPState *s = opaque; |
| |
| switch (addr) { |
| case SIFIVE_U_OTP_PA: |
| return s->pa; |
| case SIFIVE_U_OTP_PAIO: |
| return s->paio; |
| case SIFIVE_U_OTP_PAS: |
| return s->pas; |
| case SIFIVE_U_OTP_PCE: |
| return s->pce; |
| case SIFIVE_U_OTP_PCLK: |
| return s->pclk; |
| case SIFIVE_U_OTP_PDIN: |
| return s->pdin; |
| case SIFIVE_U_OTP_PDOUT: |
| if ((s->pce & SIFIVE_U_OTP_PCE_EN) && |
| (s->pdstb & SIFIVE_U_OTP_PDSTB_EN) && |
| (s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) { |
| |
| /* read from backend */ |
| if (s->blk) { |
| int32_t buf; |
| |
| if (blk_pread(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, |
| SIFIVE_U_OTP_FUSE_WORD, &buf, 0) < 0) { |
| error_report("read error index<%d>", s->pa); |
| return 0xff; |
| } |
| |
| return buf; |
| } |
| |
| return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK]; |
| } else { |
| return 0xff; |
| } |
| case SIFIVE_U_OTP_PDSTB: |
| return s->pdstb; |
| case SIFIVE_U_OTP_PPROG: |
| return s->pprog; |
| case SIFIVE_U_OTP_PTC: |
| return s->ptc; |
| case SIFIVE_U_OTP_PTM: |
| return s->ptm; |
| case SIFIVE_U_OTP_PTM_REP: |
| return s->ptm_rep; |
| case SIFIVE_U_OTP_PTR: |
| return s->ptr; |
| case SIFIVE_U_OTP_PTRIM: |
| return s->ptrim; |
| case SIFIVE_U_OTP_PWE: |
| return s->pwe; |
| } |
| |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%" HWADDR_PRIx "\n", |
| __func__, addr); |
| return 0; |
| } |
| |
| static void sifive_u_otp_write(void *opaque, hwaddr addr, |
| uint64_t val64, unsigned int size) |
| { |
| SiFiveUOTPState *s = opaque; |
| uint32_t val32 = (uint32_t)val64; |
| |
| switch (addr) { |
| case SIFIVE_U_OTP_PA: |
| s->pa = val32 & SIFIVE_U_OTP_PA_MASK; |
| break; |
| case SIFIVE_U_OTP_PAIO: |
| s->paio = val32; |
| break; |
| case SIFIVE_U_OTP_PAS: |
| s->pas = val32; |
| break; |
| case SIFIVE_U_OTP_PCE: |
| s->pce = val32; |
| break; |
| case SIFIVE_U_OTP_PCLK: |
| s->pclk = val32; |
| break; |
| case SIFIVE_U_OTP_PDIN: |
| s->pdin = val32; |
| break; |
| case SIFIVE_U_OTP_PDOUT: |
| /* read-only */ |
| break; |
| case SIFIVE_U_OTP_PDSTB: |
| s->pdstb = val32; |
| break; |
| case SIFIVE_U_OTP_PPROG: |
| s->pprog = val32; |
| break; |
| case SIFIVE_U_OTP_PTC: |
| s->ptc = val32; |
| break; |
| case SIFIVE_U_OTP_PTM: |
| s->ptm = val32; |
| break; |
| case SIFIVE_U_OTP_PTM_REP: |
| s->ptm_rep = val32; |
| break; |
| case SIFIVE_U_OTP_PTR: |
| s->ptr = val32; |
| break; |
| case SIFIVE_U_OTP_PTRIM: |
| s->ptrim = val32; |
| break; |
| case SIFIVE_U_OTP_PWE: |
| s->pwe = val32 & SIFIVE_U_OTP_PWE_EN; |
| |
| /* PWE is enabled. Ignore PAS=1 (no redundancy cell) */ |
| if (s->pwe && !s->pas) { |
| if (GET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "write once error: idx<%u>, bit<%u>\n", |
| s->pa, s->paio); |
| break; |
| } |
| |
| /* write bit data */ |
| SET_FUSEARRAY_BIT(s->fuse, s->pa, s->paio, s->pdin); |
| |
| /* write to backend */ |
| if (s->blk) { |
| if (blk_pwrite(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, |
| SIFIVE_U_OTP_FUSE_WORD, &s->fuse[s->pa], 0) |
| < 0) { |
| error_report("write error index<%d>", s->pa); |
| } |
| } |
| |
| /* update written bit */ |
| SET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio, WRITTEN_BIT_ON); |
| } |
| |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%" HWADDR_PRIx |
| " v=0x%x\n", __func__, addr, val32); |
| } |
| } |
| |
| static const MemoryRegionOps sifive_u_otp_ops = { |
| .read = sifive_u_otp_read, |
| .write = sifive_u_otp_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4 |
| } |
| }; |
| |
| static Property sifive_u_otp_properties[] = { |
| DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0), |
| DEFINE_PROP_DRIVE("drive", SiFiveUOTPState, blk), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void sifive_u_otp_realize(DeviceState *dev, Error **errp) |
| { |
| SiFiveUOTPState *s = SIFIVE_U_OTP(dev); |
| DriveInfo *dinfo; |
| |
| memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_u_otp_ops, s, |
| TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE); |
| sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); |
| |
| dinfo = drive_get(IF_PFLASH, 0, 0); |
| if (dinfo) { |
| int ret; |
| uint64_t perm; |
| int filesize; |
| BlockBackend *blk; |
| |
| blk = blk_by_legacy_dinfo(dinfo); |
| filesize = SIFIVE_U_OTP_NUM_FUSES * SIFIVE_U_OTP_FUSE_WORD; |
| if (blk_getlength(blk) < filesize) { |
| error_setg(errp, "OTP drive size < 16K"); |
| return; |
| } |
| |
| qdev_prop_set_drive_err(dev, "drive", blk, errp); |
| |
| if (s->blk) { |
| perm = BLK_PERM_CONSISTENT_READ | |
| (blk_supports_write_perm(s->blk) ? BLK_PERM_WRITE : 0); |
| ret = blk_set_perm(s->blk, perm, BLK_PERM_ALL, errp); |
| if (ret < 0) { |
| return; |
| } |
| |
| if (blk_pread(s->blk, 0, filesize, s->fuse, 0) < 0) { |
| error_setg(errp, "failed to read the initial flash content"); |
| return; |
| } |
| } |
| } |
| |
| /* Initialize all fuses' initial value to 0xFFs */ |
| memset(s->fuse, 0xff, sizeof(s->fuse)); |
| |
| /* Make a valid content of serial number */ |
| s->fuse[SIFIVE_U_OTP_SERIAL_ADDR] = s->serial; |
| s->fuse[SIFIVE_U_OTP_SERIAL_ADDR + 1] = ~(s->serial); |
| |
| if (s->blk) { |
| /* Put serial number to backend as well*/ |
| uint32_t serial_data; |
| int index = SIFIVE_U_OTP_SERIAL_ADDR; |
| |
| serial_data = s->serial; |
| if (blk_pwrite(s->blk, index * SIFIVE_U_OTP_FUSE_WORD, |
| SIFIVE_U_OTP_FUSE_WORD, &serial_data, 0) < 0) { |
| error_setg(errp, "failed to write index<%d>", index); |
| return; |
| } |
| |
| serial_data = ~(s->serial); |
| if (blk_pwrite(s->blk, (index + 1) * SIFIVE_U_OTP_FUSE_WORD, |
| SIFIVE_U_OTP_FUSE_WORD, &serial_data, 0) < 0) { |
| error_setg(errp, "failed to write index<%d>", index + 1); |
| return; |
| } |
| } |
| |
| /* Initialize write-once map */ |
| memset(s->fuse_wo, 0x00, sizeof(s->fuse_wo)); |
| } |
| |
| static void sifive_u_otp_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| device_class_set_props(dc, sifive_u_otp_properties); |
| dc->realize = sifive_u_otp_realize; |
| } |
| |
| static const TypeInfo sifive_u_otp_info = { |
| .name = TYPE_SIFIVE_U_OTP, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(SiFiveUOTPState), |
| .class_init = sifive_u_otp_class_init, |
| }; |
| |
| static void sifive_u_otp_register_types(void) |
| { |
| type_register_static(&sifive_u_otp_info); |
| } |
| |
| type_init(sifive_u_otp_register_types) |