| /* |
| * vhost-user-blk host device |
| * |
| * Copyright(C) 2017 Intel Corporation. |
| * |
| * Authors: |
| * Changpeng Liu <changpeng.liu@intel.com> |
| * |
| * Largely based on the "vhost-user-scsi.c" and "vhost-scsi.c" implemented by: |
| * Felipe Franciosi <felipe@nutanix.com> |
| * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> |
| * Nicholas Bellinger <nab@risingtidesystems.com> |
| * |
| * This work is licensed under the terms of the GNU LGPL, version 2 or later. |
| * See the COPYING.LIB file in the top-level directory. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| #include "qemu/cutils.h" |
| #include "hw/qdev-core.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/qdev-properties-system.h" |
| #include "hw/virtio/virtio-blk-common.h" |
| #include "hw/virtio/vhost.h" |
| #include "hw/virtio/vhost-user-blk.h" |
| #include "hw/virtio/virtio.h" |
| #include "hw/virtio/virtio-bus.h" |
| #include "hw/virtio/virtio-access.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/runstate.h" |
| |
| static const int user_feature_bits[] = { |
| VIRTIO_BLK_F_SIZE_MAX, |
| VIRTIO_BLK_F_SEG_MAX, |
| VIRTIO_BLK_F_GEOMETRY, |
| VIRTIO_BLK_F_BLK_SIZE, |
| VIRTIO_BLK_F_TOPOLOGY, |
| VIRTIO_BLK_F_MQ, |
| VIRTIO_BLK_F_RO, |
| VIRTIO_BLK_F_FLUSH, |
| VIRTIO_BLK_F_CONFIG_WCE, |
| VIRTIO_BLK_F_DISCARD, |
| VIRTIO_BLK_F_WRITE_ZEROES, |
| VIRTIO_F_VERSION_1, |
| VIRTIO_RING_F_INDIRECT_DESC, |
| VIRTIO_RING_F_EVENT_IDX, |
| VIRTIO_F_NOTIFY_ON_EMPTY, |
| VIRTIO_F_RING_PACKED, |
| VIRTIO_F_IOMMU_PLATFORM, |
| VIRTIO_F_RING_RESET, |
| VIRTIO_F_IN_ORDER, |
| VIRTIO_F_NOTIFICATION_DATA, |
| VHOST_INVALID_FEATURE_BIT |
| }; |
| |
| static void vhost_user_blk_event(void *opaque, QEMUChrEvent event); |
| |
| static void vhost_user_blk_update_config(VirtIODevice *vdev, uint8_t *config) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| |
| /* Our num_queues overrides the device backend */ |
| virtio_stw_p(vdev, &s->blkcfg.num_queues, s->num_queues); |
| |
| memcpy(config, &s->blkcfg, vdev->config_len); |
| } |
| |
| static void vhost_user_blk_set_config(VirtIODevice *vdev, const uint8_t *config) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| struct virtio_blk_config *blkcfg = (struct virtio_blk_config *)config; |
| int ret; |
| |
| if (blkcfg->wce == s->blkcfg.wce) { |
| return; |
| } |
| |
| ret = vhost_dev_set_config(&s->dev, &blkcfg->wce, |
| offsetof(struct virtio_blk_config, wce), |
| sizeof(blkcfg->wce), |
| VHOST_SET_CONFIG_TYPE_FRONTEND); |
| if (ret) { |
| error_report("set device config space failed"); |
| return; |
| } |
| |
| s->blkcfg.wce = blkcfg->wce; |
| } |
| |
| static int vhost_user_blk_handle_config_change(struct vhost_dev *dev) |
| { |
| int ret; |
| VirtIODevice *vdev = dev->vdev; |
| VHostUserBlk *s = VHOST_USER_BLK(dev->vdev); |
| Error *local_err = NULL; |
| |
| if (!dev->started) { |
| return 0; |
| } |
| |
| ret = vhost_dev_get_config(dev, (uint8_t *)&s->blkcfg, |
| vdev->config_len, &local_err); |
| if (ret < 0) { |
| error_report_err(local_err); |
| return ret; |
| } |
| |
| memcpy(dev->vdev->config, &s->blkcfg, vdev->config_len); |
| virtio_notify_config(dev->vdev); |
| |
| return 0; |
| } |
| |
| const VhostDevConfigOps blk_ops = { |
| .vhost_dev_config_notifier = vhost_user_blk_handle_config_change, |
| }; |
| |
| static int vhost_user_blk_start(VirtIODevice *vdev, Error **errp) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| int i, ret; |
| |
| if (!k->set_guest_notifiers) { |
| error_setg(errp, "binding does not support guest notifiers"); |
| return -ENOSYS; |
| } |
| |
| ret = vhost_dev_enable_notifiers(&s->dev, vdev); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, "Error enabling host notifiers"); |
| return ret; |
| } |
| |
| ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, true); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, "Error binding guest notifier"); |
| goto err_host_notifiers; |
| } |
| |
| s->dev.acked_features = vdev->guest_features; |
| |
| ret = vhost_dev_prepare_inflight(&s->dev, vdev); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, "Error setting inflight format"); |
| goto err_guest_notifiers; |
| } |
| |
| if (!s->inflight->addr) { |
| ret = vhost_dev_get_inflight(&s->dev, s->queue_size, s->inflight); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, "Error getting inflight"); |
| goto err_guest_notifiers; |
| } |
| } |
| |
| ret = vhost_dev_set_inflight(&s->dev, s->inflight); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, "Error setting inflight"); |
| goto err_guest_notifiers; |
| } |
| |
| /* guest_notifier_mask/pending not used yet, so just unmask |
| * everything here. virtio-pci will do the right thing by |
| * enabling/disabling irqfd. |
| */ |
| for (i = 0; i < s->dev.nvqs; i++) { |
| vhost_virtqueue_mask(&s->dev, vdev, i, false); |
| } |
| |
| s->dev.vq_index_end = s->dev.nvqs; |
| ret = vhost_dev_start(&s->dev, vdev, true); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, "Error starting vhost"); |
| goto err_guest_notifiers; |
| } |
| s->started_vu = true; |
| |
| return ret; |
| |
| err_guest_notifiers: |
| for (i = 0; i < s->dev.nvqs; i++) { |
| vhost_virtqueue_mask(&s->dev, vdev, i, true); |
| } |
| k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false); |
| err_host_notifiers: |
| vhost_dev_disable_notifiers(&s->dev, vdev); |
| return ret; |
| } |
| |
| static void vhost_user_blk_stop(VirtIODevice *vdev) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| int ret; |
| |
| if (!s->started_vu) { |
| return; |
| } |
| s->started_vu = false; |
| |
| if (!k->set_guest_notifiers) { |
| return; |
| } |
| |
| vhost_dev_stop(&s->dev, vdev, true); |
| |
| ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false); |
| if (ret < 0) { |
| error_report("vhost guest notifier cleanup failed: %d", ret); |
| return; |
| } |
| |
| vhost_dev_disable_notifiers(&s->dev, vdev); |
| } |
| |
| static void vhost_user_blk_set_status(VirtIODevice *vdev, uint8_t status) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| bool should_start = virtio_device_should_start(vdev, status); |
| Error *local_err = NULL; |
| int ret; |
| |
| if (!s->connected) { |
| return; |
| } |
| |
| if (vhost_dev_is_started(&s->dev) == should_start) { |
| return; |
| } |
| |
| if (should_start) { |
| ret = vhost_user_blk_start(vdev, &local_err); |
| if (ret < 0) { |
| error_reportf_err(local_err, "vhost-user-blk: vhost start failed: "); |
| qemu_chr_fe_disconnect(&s->chardev); |
| } |
| } else { |
| vhost_user_blk_stop(vdev); |
| } |
| |
| } |
| |
| static uint64_t vhost_user_blk_get_features(VirtIODevice *vdev, |
| uint64_t features, |
| Error **errp) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| |
| /* Turn on pre-defined features */ |
| virtio_add_feature(&features, VIRTIO_BLK_F_SIZE_MAX); |
| virtio_add_feature(&features, VIRTIO_BLK_F_SEG_MAX); |
| virtio_add_feature(&features, VIRTIO_BLK_F_GEOMETRY); |
| virtio_add_feature(&features, VIRTIO_BLK_F_TOPOLOGY); |
| virtio_add_feature(&features, VIRTIO_BLK_F_BLK_SIZE); |
| virtio_add_feature(&features, VIRTIO_BLK_F_FLUSH); |
| virtio_add_feature(&features, VIRTIO_BLK_F_RO); |
| |
| if (s->num_queues > 1) { |
| virtio_add_feature(&features, VIRTIO_BLK_F_MQ); |
| } |
| |
| return vhost_get_features(&s->dev, user_feature_bits, features); |
| } |
| |
| static void vhost_user_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| Error *local_err = NULL; |
| int i, ret; |
| |
| if (!vdev->start_on_kick) { |
| return; |
| } |
| |
| if (!s->connected) { |
| return; |
| } |
| |
| if (vhost_dev_is_started(&s->dev)) { |
| return; |
| } |
| |
| /* Some guests kick before setting VIRTIO_CONFIG_S_DRIVER_OK so start |
| * vhost here instead of waiting for .set_status(). |
| */ |
| ret = vhost_user_blk_start(vdev, &local_err); |
| if (ret < 0) { |
| error_reportf_err(local_err, "vhost-user-blk: vhost start failed: "); |
| qemu_chr_fe_disconnect(&s->chardev); |
| return; |
| } |
| |
| /* Kick right away to begin processing requests already in vring */ |
| for (i = 0; i < s->dev.nvqs; i++) { |
| VirtQueue *kick_vq = virtio_get_queue(vdev, i); |
| |
| if (!virtio_queue_get_desc_addr(vdev, i)) { |
| continue; |
| } |
| event_notifier_set(virtio_queue_get_host_notifier(kick_vq)); |
| } |
| } |
| |
| static void vhost_user_blk_reset(VirtIODevice *vdev) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| |
| vhost_dev_free_inflight(s->inflight); |
| } |
| |
| static int vhost_user_blk_connect(DeviceState *dev, Error **errp) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| int ret = 0; |
| |
| if (s->connected) { |
| return 0; |
| } |
| |
| s->dev.num_queues = s->num_queues; |
| s->dev.nvqs = s->num_queues; |
| s->dev.vqs = s->vhost_vqs; |
| s->dev.vq_index = 0; |
| s->dev.backend_features = 0; |
| |
| vhost_dev_set_config_notifier(&s->dev, &blk_ops); |
| |
| s->vhost_user.supports_config = true; |
| ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, |
| errp); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| s->connected = true; |
| |
| /* restore vhost state */ |
| if (virtio_device_started(vdev, vdev->status)) { |
| ret = vhost_user_blk_start(vdev, errp); |
| } |
| |
| return ret; |
| } |
| |
| static void vhost_user_blk_disconnect(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| |
| if (!s->connected) { |
| goto done; |
| } |
| s->connected = false; |
| |
| vhost_user_blk_stop(vdev); |
| |
| vhost_dev_cleanup(&s->dev); |
| |
| done: |
| /* Re-instate the event handler for new connections */ |
| qemu_chr_fe_set_handlers(&s->chardev, NULL, NULL, vhost_user_blk_event, |
| NULL, dev, NULL, true); |
| } |
| |
| static void vhost_user_blk_event(void *opaque, QEMUChrEvent event) |
| { |
| DeviceState *dev = opaque; |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| Error *local_err = NULL; |
| |
| switch (event) { |
| case CHR_EVENT_OPENED: |
| if (vhost_user_blk_connect(dev, &local_err) < 0) { |
| error_report_err(local_err); |
| qemu_chr_fe_disconnect(&s->chardev); |
| return; |
| } |
| break; |
| case CHR_EVENT_CLOSED: |
| /* defer close until later to avoid circular close */ |
| vhost_user_async_close(dev, &s->chardev, &s->dev, |
| vhost_user_blk_disconnect); |
| break; |
| case CHR_EVENT_BREAK: |
| case CHR_EVENT_MUX_IN: |
| case CHR_EVENT_MUX_OUT: |
| /* Ignore */ |
| break; |
| } |
| } |
| |
| static int vhost_user_blk_realize_connect(VHostUserBlk *s, Error **errp) |
| { |
| DeviceState *dev = DEVICE(s); |
| int ret; |
| |
| s->connected = false; |
| |
| ret = qemu_chr_fe_wait_connected(&s->chardev, errp); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = vhost_user_blk_connect(dev, errp); |
| if (ret < 0) { |
| qemu_chr_fe_disconnect(&s->chardev); |
| return ret; |
| } |
| assert(s->connected); |
| |
| ret = vhost_dev_get_config(&s->dev, (uint8_t *)&s->blkcfg, |
| VIRTIO_DEVICE(s)->config_len, errp); |
| if (ret < 0) { |
| qemu_chr_fe_disconnect(&s->chardev); |
| vhost_dev_cleanup(&s->dev); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void vhost_user_blk_device_realize(DeviceState *dev, Error **errp) |
| { |
| ERRP_GUARD(); |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| size_t config_size; |
| int retries; |
| int i, ret; |
| |
| if (!s->chardev.chr) { |
| error_setg(errp, "chardev is mandatory"); |
| return; |
| } |
| |
| if (s->num_queues == VHOST_USER_BLK_AUTO_NUM_QUEUES) { |
| s->num_queues = 1; |
| } |
| if (!s->num_queues || s->num_queues > VIRTIO_QUEUE_MAX) { |
| error_setg(errp, "invalid number of IO queues"); |
| return; |
| } |
| |
| if (!s->queue_size) { |
| error_setg(errp, "queue size must be non-zero"); |
| return; |
| } |
| if (s->queue_size > VIRTQUEUE_MAX_SIZE) { |
| error_setg(errp, "queue size must not exceed %d", |
| VIRTQUEUE_MAX_SIZE); |
| return; |
| } |
| |
| if (!vhost_user_init(&s->vhost_user, &s->chardev, errp)) { |
| return; |
| } |
| |
| config_size = virtio_get_config_size(&virtio_blk_cfg_size_params, |
| vdev->host_features); |
| virtio_init(vdev, VIRTIO_ID_BLOCK, config_size); |
| |
| s->virtqs = g_new(VirtQueue *, s->num_queues); |
| for (i = 0; i < s->num_queues; i++) { |
| s->virtqs[i] = virtio_add_queue(vdev, s->queue_size, |
| vhost_user_blk_handle_output); |
| } |
| |
| s->inflight = g_new0(struct vhost_inflight, 1); |
| s->vhost_vqs = g_new0(struct vhost_virtqueue, s->num_queues); |
| |
| retries = VU_REALIZE_CONN_RETRIES; |
| assert(!*errp); |
| do { |
| if (*errp) { |
| error_prepend(errp, "Reconnecting after error: "); |
| error_report_err(*errp); |
| *errp = NULL; |
| } |
| ret = vhost_user_blk_realize_connect(s, errp); |
| } while (ret < 0 && retries--); |
| |
| if (ret < 0) { |
| goto virtio_err; |
| } |
| |
| /* we're fully initialized, now we can operate, so add the handler */ |
| qemu_chr_fe_set_handlers(&s->chardev, NULL, NULL, |
| vhost_user_blk_event, NULL, (void *)dev, |
| NULL, true); |
| return; |
| |
| virtio_err: |
| g_free(s->vhost_vqs); |
| s->vhost_vqs = NULL; |
| g_free(s->inflight); |
| s->inflight = NULL; |
| for (i = 0; i < s->num_queues; i++) { |
| virtio_delete_queue(s->virtqs[i]); |
| } |
| g_free(s->virtqs); |
| virtio_cleanup(vdev); |
| vhost_user_cleanup(&s->vhost_user); |
| } |
| |
| static void vhost_user_blk_device_unrealize(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserBlk *s = VHOST_USER_BLK(dev); |
| int i; |
| |
| virtio_set_status(vdev, 0); |
| qemu_chr_fe_set_handlers(&s->chardev, NULL, NULL, NULL, |
| NULL, NULL, NULL, false); |
| vhost_dev_cleanup(&s->dev); |
| vhost_dev_free_inflight(s->inflight); |
| g_free(s->vhost_vqs); |
| s->vhost_vqs = NULL; |
| g_free(s->inflight); |
| s->inflight = NULL; |
| |
| for (i = 0; i < s->num_queues; i++) { |
| virtio_delete_queue(s->virtqs[i]); |
| } |
| g_free(s->virtqs); |
| virtio_cleanup(vdev); |
| vhost_user_cleanup(&s->vhost_user); |
| } |
| |
| static void vhost_user_blk_instance_init(Object *obj) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(obj); |
| |
| device_add_bootindex_property(obj, &s->bootindex, "bootindex", |
| "/disk@0,0", DEVICE(obj)); |
| } |
| |
| static struct vhost_dev *vhost_user_blk_get_vhost(VirtIODevice *vdev) |
| { |
| VHostUserBlk *s = VHOST_USER_BLK(vdev); |
| return &s->dev; |
| } |
| |
| static const VMStateDescription vmstate_vhost_user_blk = { |
| .name = "vhost-user-blk", |
| .minimum_version_id = 1, |
| .version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_VIRTIO_DEVICE, |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static Property vhost_user_blk_properties[] = { |
| DEFINE_PROP_CHR("chardev", VHostUserBlk, chardev), |
| DEFINE_PROP_UINT16("num-queues", VHostUserBlk, num_queues, |
| VHOST_USER_BLK_AUTO_NUM_QUEUES), |
| DEFINE_PROP_UINT32("queue-size", VHostUserBlk, queue_size, 128), |
| DEFINE_PROP_BIT64("config-wce", VHostUserBlk, parent_obj.host_features, |
| VIRTIO_BLK_F_CONFIG_WCE, true), |
| DEFINE_PROP_BIT64("discard", VHostUserBlk, parent_obj.host_features, |
| VIRTIO_BLK_F_DISCARD, true), |
| DEFINE_PROP_BIT64("write-zeroes", VHostUserBlk, parent_obj.host_features, |
| VIRTIO_BLK_F_WRITE_ZEROES, true), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void vhost_user_blk_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); |
| |
| device_class_set_props(dc, vhost_user_blk_properties); |
| dc->vmsd = &vmstate_vhost_user_blk; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| vdc->realize = vhost_user_blk_device_realize; |
| vdc->unrealize = vhost_user_blk_device_unrealize; |
| vdc->get_config = vhost_user_blk_update_config; |
| vdc->set_config = vhost_user_blk_set_config; |
| vdc->get_features = vhost_user_blk_get_features; |
| vdc->set_status = vhost_user_blk_set_status; |
| vdc->reset = vhost_user_blk_reset; |
| vdc->get_vhost = vhost_user_blk_get_vhost; |
| } |
| |
| static const TypeInfo vhost_user_blk_info = { |
| .name = TYPE_VHOST_USER_BLK, |
| .parent = TYPE_VIRTIO_DEVICE, |
| .instance_size = sizeof(VHostUserBlk), |
| .instance_init = vhost_user_blk_instance_init, |
| .class_init = vhost_user_blk_class_init, |
| }; |
| |
| static void virtio_register_types(void) |
| { |
| type_register_static(&vhost_user_blk_info); |
| } |
| |
| type_init(virtio_register_types) |