| /* |
| * QEMU PCI bus manager |
| * |
| * Copyright (c) 2004 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "vl.h" |
| |
| //#define DEBUG_PCI |
| |
| struct PCIBus { |
| int bus_num; |
| int devfn_min; |
| pci_set_irq_fn set_irq; |
| uint32_t config_reg; /* XXX: suppress */ |
| /* low level pic */ |
| SetIRQFunc *low_set_irq; |
| void *irq_opaque; |
| PCIDevice *devices[256]; |
| }; |
| |
| static void pci_update_mappings(PCIDevice *d); |
| |
| target_phys_addr_t pci_mem_base; |
| static int pci_irq_index; |
| static PCIBus *first_bus; |
| |
| PCIBus *pci_register_bus(pci_set_irq_fn set_irq, void *pic, int devfn_min) |
| { |
| PCIBus *bus; |
| bus = qemu_mallocz(sizeof(PCIBus)); |
| bus->set_irq = set_irq; |
| bus->irq_opaque = pic; |
| bus->devfn_min = devfn_min; |
| first_bus = bus; |
| return bus; |
| } |
| |
| int pci_bus_num(PCIBus *s) |
| { |
| return s->bus_num; |
| } |
| |
| void pci_device_save(PCIDevice *s, QEMUFile *f) |
| { |
| qemu_put_be32(f, 1); /* PCI device version */ |
| qemu_put_buffer(f, s->config, 256); |
| } |
| |
| int pci_device_load(PCIDevice *s, QEMUFile *f) |
| { |
| uint32_t version_id; |
| version_id = qemu_get_be32(f); |
| if (version_id != 1) |
| return -EINVAL; |
| qemu_get_buffer(f, s->config, 256); |
| pci_update_mappings(s); |
| return 0; |
| } |
| |
| /* -1 for devfn means auto assign */ |
| PCIDevice *pci_register_device(PCIBus *bus, const char *name, |
| int instance_size, int devfn, |
| PCIConfigReadFunc *config_read, |
| PCIConfigWriteFunc *config_write) |
| { |
| PCIDevice *pci_dev; |
| |
| if (pci_irq_index >= PCI_DEVICES_MAX) |
| return NULL; |
| |
| if (devfn < 0) { |
| for(devfn = bus->devfn_min ; devfn < 256; devfn += 8) { |
| if (!bus->devices[devfn]) |
| goto found; |
| } |
| return NULL; |
| found: ; |
| } |
| pci_dev = qemu_mallocz(instance_size); |
| if (!pci_dev) |
| return NULL; |
| pci_dev->bus = bus; |
| pci_dev->devfn = devfn; |
| pstrcpy(pci_dev->name, sizeof(pci_dev->name), name); |
| |
| if (!config_read) |
| config_read = pci_default_read_config; |
| if (!config_write) |
| config_write = pci_default_write_config; |
| pci_dev->config_read = config_read; |
| pci_dev->config_write = config_write; |
| pci_dev->irq_index = pci_irq_index++; |
| bus->devices[devfn] = pci_dev; |
| return pci_dev; |
| } |
| |
| void pci_register_io_region(PCIDevice *pci_dev, int region_num, |
| uint32_t size, int type, |
| PCIMapIORegionFunc *map_func) |
| { |
| PCIIORegion *r; |
| uint32_t addr; |
| |
| if ((unsigned int)region_num >= PCI_NUM_REGIONS) |
| return; |
| r = &pci_dev->io_regions[region_num]; |
| r->addr = -1; |
| r->size = size; |
| r->type = type; |
| r->map_func = map_func; |
| if (region_num == PCI_ROM_SLOT) { |
| addr = 0x30; |
| } else { |
| addr = 0x10 + region_num * 4; |
| } |
| *(uint32_t *)(pci_dev->config + addr) = cpu_to_le32(type); |
| } |
| |
| target_phys_addr_t pci_to_cpu_addr(target_phys_addr_t addr) |
| { |
| return addr + pci_mem_base; |
| } |
| |
| static void pci_update_mappings(PCIDevice *d) |
| { |
| PCIIORegion *r; |
| int cmd, i; |
| uint32_t last_addr, new_addr, config_ofs; |
| |
| cmd = le16_to_cpu(*(uint16_t *)(d->config + PCI_COMMAND)); |
| for(i = 0; i < PCI_NUM_REGIONS; i++) { |
| r = &d->io_regions[i]; |
| if (i == PCI_ROM_SLOT) { |
| config_ofs = 0x30; |
| } else { |
| config_ofs = 0x10 + i * 4; |
| } |
| if (r->size != 0) { |
| if (r->type & PCI_ADDRESS_SPACE_IO) { |
| if (cmd & PCI_COMMAND_IO) { |
| new_addr = le32_to_cpu(*(uint32_t *)(d->config + |
| config_ofs)); |
| new_addr = new_addr & ~(r->size - 1); |
| last_addr = new_addr + r->size - 1; |
| /* NOTE: we have only 64K ioports on PC */ |
| if (last_addr <= new_addr || new_addr == 0 || |
| last_addr >= 0x10000) { |
| new_addr = -1; |
| } |
| } else { |
| new_addr = -1; |
| } |
| } else { |
| if (cmd & PCI_COMMAND_MEMORY) { |
| new_addr = le32_to_cpu(*(uint32_t *)(d->config + |
| config_ofs)); |
| /* the ROM slot has a specific enable bit */ |
| if (i == PCI_ROM_SLOT && !(new_addr & 1)) |
| goto no_mem_map; |
| new_addr = new_addr & ~(r->size - 1); |
| last_addr = new_addr + r->size - 1; |
| /* NOTE: we do not support wrapping */ |
| /* XXX: as we cannot support really dynamic |
| mappings, we handle specific values as invalid |
| mappings. */ |
| if (last_addr <= new_addr || new_addr == 0 || |
| last_addr == -1) { |
| new_addr = -1; |
| } |
| } else { |
| no_mem_map: |
| new_addr = -1; |
| } |
| } |
| /* now do the real mapping */ |
| if (new_addr != r->addr) { |
| if (r->addr != -1) { |
| if (r->type & PCI_ADDRESS_SPACE_IO) { |
| int class; |
| /* NOTE: specific hack for IDE in PC case: |
| only one byte must be mapped. */ |
| class = d->config[0x0a] | (d->config[0x0b] << 8); |
| if (class == 0x0101 && r->size == 4) { |
| isa_unassign_ioport(r->addr + 2, 1); |
| } else { |
| isa_unassign_ioport(r->addr, r->size); |
| } |
| } else { |
| cpu_register_physical_memory(pci_to_cpu_addr(r->addr), |
| r->size, |
| IO_MEM_UNASSIGNED); |
| } |
| } |
| r->addr = new_addr; |
| if (r->addr != -1) { |
| r->map_func(d, i, r->addr, r->size, r->type); |
| } |
| } |
| } |
| } |
| } |
| |
| uint32_t pci_default_read_config(PCIDevice *d, |
| uint32_t address, int len) |
| { |
| uint32_t val; |
| switch(len) { |
| case 1: |
| val = d->config[address]; |
| break; |
| case 2: |
| val = le16_to_cpu(*(uint16_t *)(d->config + address)); |
| break; |
| default: |
| case 4: |
| val = le32_to_cpu(*(uint32_t *)(d->config + address)); |
| break; |
| } |
| return val; |
| } |
| |
| void pci_default_write_config(PCIDevice *d, |
| uint32_t address, uint32_t val, int len) |
| { |
| int can_write, i; |
| uint32_t end, addr; |
| |
| if (len == 4 && ((address >= 0x10 && address < 0x10 + 4 * 6) || |
| (address >= 0x30 && address < 0x34))) { |
| PCIIORegion *r; |
| int reg; |
| |
| if ( address >= 0x30 ) { |
| reg = PCI_ROM_SLOT; |
| }else{ |
| reg = (address - 0x10) >> 2; |
| } |
| r = &d->io_regions[reg]; |
| if (r->size == 0) |
| goto default_config; |
| /* compute the stored value */ |
| if (reg == PCI_ROM_SLOT) { |
| /* keep ROM enable bit */ |
| val &= (~(r->size - 1)) | 1; |
| } else { |
| val &= ~(r->size - 1); |
| val |= r->type; |
| } |
| *(uint32_t *)(d->config + address) = cpu_to_le32(val); |
| pci_update_mappings(d); |
| return; |
| } |
| default_config: |
| /* not efficient, but simple */ |
| addr = address; |
| for(i = 0; i < len; i++) { |
| /* default read/write accesses */ |
| switch(d->config[0x0e]) { |
| case 0x00: |
| case 0x80: |
| switch(addr) { |
| case 0x00: |
| case 0x01: |
| case 0x02: |
| case 0x03: |
| case 0x08: |
| case 0x09: |
| case 0x0a: |
| case 0x0b: |
| case 0x0e: |
| case 0x10 ... 0x27: /* base */ |
| case 0x30 ... 0x33: /* rom */ |
| case 0x3d: |
| can_write = 0; |
| break; |
| default: |
| can_write = 1; |
| break; |
| } |
| break; |
| default: |
| case 0x01: |
| switch(addr) { |
| case 0x00: |
| case 0x01: |
| case 0x02: |
| case 0x03: |
| case 0x08: |
| case 0x09: |
| case 0x0a: |
| case 0x0b: |
| case 0x0e: |
| case 0x38 ... 0x3b: /* rom */ |
| case 0x3d: |
| can_write = 0; |
| break; |
| default: |
| can_write = 1; |
| break; |
| } |
| break; |
| } |
| if (can_write) { |
| d->config[addr] = val; |
| } |
| addr++; |
| val >>= 8; |
| } |
| |
| end = address + len; |
| if (end > PCI_COMMAND && address < (PCI_COMMAND + 2)) { |
| /* if the command register is modified, we must modify the mappings */ |
| pci_update_mappings(d); |
| } |
| } |
| |
| void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) |
| { |
| PCIBus *s = opaque; |
| PCIDevice *pci_dev; |
| int config_addr, bus_num; |
| |
| #if defined(DEBUG_PCI) && 0 |
| printf("pci_data_write: addr=%08x val=%08x len=%d\n", |
| addr, val, len); |
| #endif |
| bus_num = (addr >> 16) & 0xff; |
| if (bus_num != 0) |
| return; |
| pci_dev = s->devices[(addr >> 8) & 0xff]; |
| if (!pci_dev) |
| return; |
| config_addr = addr & 0xff; |
| #if defined(DEBUG_PCI) |
| printf("pci_config_write: %s: addr=%02x val=%08x len=%d\n", |
| pci_dev->name, config_addr, val, len); |
| #endif |
| pci_dev->config_write(pci_dev, config_addr, val, len); |
| } |
| |
| uint32_t pci_data_read(void *opaque, uint32_t addr, int len) |
| { |
| PCIBus *s = opaque; |
| PCIDevice *pci_dev; |
| int config_addr, bus_num; |
| uint32_t val; |
| |
| bus_num = (addr >> 16) & 0xff; |
| if (bus_num != 0) |
| goto fail; |
| pci_dev = s->devices[(addr >> 8) & 0xff]; |
| if (!pci_dev) { |
| fail: |
| switch(len) { |
| case 1: |
| val = 0xff; |
| break; |
| case 2: |
| val = 0xffff; |
| break; |
| default: |
| case 4: |
| val = 0xffffffff; |
| break; |
| } |
| goto the_end; |
| } |
| config_addr = addr & 0xff; |
| val = pci_dev->config_read(pci_dev, config_addr, len); |
| #if defined(DEBUG_PCI) |
| printf("pci_config_read: %s: addr=%02x val=%08x len=%d\n", |
| pci_dev->name, config_addr, val, len); |
| #endif |
| the_end: |
| #if defined(DEBUG_PCI) && 0 |
| printf("pci_data_read: addr=%08x val=%08x len=%d\n", |
| addr, val, len); |
| #endif |
| return val; |
| } |
| |
| /***********************************************************/ |
| /* generic PCI irq support */ |
| |
| /* 0 <= irq_num <= 3. level must be 0 or 1 */ |
| void pci_set_irq(PCIDevice *pci_dev, int irq_num, int level) |
| { |
| PCIBus *bus = pci_dev->bus; |
| bus->set_irq(pci_dev, bus->irq_opaque, irq_num, level); |
| } |
| |
| /***********************************************************/ |
| /* monitor info on PCI */ |
| |
| typedef struct { |
| uint16_t class; |
| const char *desc; |
| } pci_class_desc; |
| |
| static pci_class_desc pci_class_descriptions[] = |
| { |
| { 0x0100, "SCSI controller"}, |
| { 0x0101, "IDE controller"}, |
| { 0x0200, "Ethernet controller"}, |
| { 0x0300, "VGA controller"}, |
| { 0x0600, "Host bridge"}, |
| { 0x0601, "ISA bridge"}, |
| { 0x0604, "PCI bridge"}, |
| { 0x0c03, "USB controller"}, |
| { 0, NULL} |
| }; |
| |
| static void pci_info_device(PCIDevice *d) |
| { |
| int i, class; |
| PCIIORegion *r; |
| pci_class_desc *desc; |
| |
| term_printf(" Bus %2d, device %3d, function %d:\n", |
| d->bus->bus_num, d->devfn >> 3, d->devfn & 7); |
| class = le16_to_cpu(*((uint16_t *)(d->config + PCI_CLASS_DEVICE))); |
| term_printf(" "); |
| desc = pci_class_descriptions; |
| while (desc->desc && class != desc->class) |
| desc++; |
| if (desc->desc) { |
| term_printf("%s", desc->desc); |
| } else { |
| term_printf("Class %04x", class); |
| } |
| term_printf(": PCI device %04x:%04x\n", |
| le16_to_cpu(*((uint16_t *)(d->config + PCI_VENDOR_ID))), |
| le16_to_cpu(*((uint16_t *)(d->config + PCI_DEVICE_ID)))); |
| |
| if (d->config[PCI_INTERRUPT_PIN] != 0) { |
| term_printf(" IRQ %d.\n", d->config[PCI_INTERRUPT_LINE]); |
| } |
| for(i = 0;i < PCI_NUM_REGIONS; i++) { |
| r = &d->io_regions[i]; |
| if (r->size != 0) { |
| term_printf(" BAR%d: ", i); |
| if (r->type & PCI_ADDRESS_SPACE_IO) { |
| term_printf("I/O at 0x%04x [0x%04x].\n", |
| r->addr, r->addr + r->size - 1); |
| } else { |
| term_printf("32 bit memory at 0x%08x [0x%08x].\n", |
| r->addr, r->addr + r->size - 1); |
| } |
| } |
| } |
| } |
| |
| void pci_for_each_device(void (*fn)(PCIDevice *d)) |
| { |
| PCIBus *bus = first_bus; |
| PCIDevice *d; |
| int devfn; |
| |
| if (bus) { |
| for(devfn = 0; devfn < 256; devfn++) { |
| d = bus->devices[devfn]; |
| if (d) |
| fn(d); |
| } |
| } |
| } |
| |
| void pci_info(void) |
| { |
| pci_for_each_device(pci_info_device); |
| } |
| |
| /* Initialize a PCI NIC. */ |
| void pci_nic_init(PCIBus *bus, NICInfo *nd) |
| { |
| if (strcmp(nd->model, "ne2k_pci") == 0) { |
| pci_ne2000_init(bus, nd); |
| } else if (strcmp(nd->model, "rtl8139") == 0) { |
| pci_rtl8139_init(bus, nd); |
| } else if (strcmp(nd->model, "pcnet") == 0) { |
| pci_pcnet_init(bus, nd); |
| } else { |
| fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model); |
| exit (1); |
| } |
| } |
| |