| /* |
| * Virtio MEM device |
| * |
| * Copyright (C) 2020 Red Hat, Inc. |
| * |
| * Authors: |
| * David Hildenbrand <david@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu-common.h" |
| #include "qemu/iov.h" |
| #include "qemu/cutils.h" |
| #include "qemu/error-report.h" |
| #include "qemu/units.h" |
| #include "sysemu/numa.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/reset.h" |
| #include "hw/virtio/virtio.h" |
| #include "hw/virtio/virtio-bus.h" |
| #include "hw/virtio/virtio-access.h" |
| #include "hw/virtio/virtio-mem.h" |
| #include "qapi/error.h" |
| #include "qapi/visitor.h" |
| #include "exec/ram_addr.h" |
| #include "migration/misc.h" |
| #include "hw/boards.h" |
| #include "hw/qdev-properties.h" |
| #include CONFIG_DEVICES |
| #include "trace.h" |
| |
| /* |
| * Let's not allow blocks smaller than 1 MiB, for example, to keep the tracking |
| * bitmap small. |
| */ |
| #define VIRTIO_MEM_MIN_BLOCK_SIZE ((uint32_t)(1 * MiB)) |
| |
| #if defined(__x86_64__) || defined(__arm__) || defined(__aarch64__) || \ |
| defined(__powerpc64__) |
| #define VIRTIO_MEM_DEFAULT_THP_SIZE ((uint32_t)(2 * MiB)) |
| #else |
| /* fallback to 1 MiB (e.g., the THP size on s390x) */ |
| #define VIRTIO_MEM_DEFAULT_THP_SIZE VIRTIO_MEM_MIN_BLOCK_SIZE |
| #endif |
| |
| /* |
| * We want to have a reasonable default block size such that |
| * 1. We avoid splitting THPs when unplugging memory, which degrades |
| * performance. |
| * 2. We avoid placing THPs for plugged blocks that also cover unplugged |
| * blocks. |
| * |
| * The actual THP size might differ between Linux kernels, so we try to probe |
| * it. In the future (if we ever run into issues regarding 2.), we might want |
| * to disable THP in case we fail to properly probe the THP size, or if the |
| * block size is configured smaller than the THP size. |
| */ |
| static uint32_t thp_size; |
| |
| #define HPAGE_PMD_SIZE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size" |
| static uint32_t virtio_mem_thp_size(void) |
| { |
| gchar *content = NULL; |
| const char *endptr; |
| uint64_t tmp; |
| |
| if (thp_size) { |
| return thp_size; |
| } |
| |
| /* |
| * Try to probe the actual THP size, fallback to (sane but eventually |
| * incorrect) default sizes. |
| */ |
| if (g_file_get_contents(HPAGE_PMD_SIZE_PATH, &content, NULL, NULL) && |
| !qemu_strtou64(content, &endptr, 0, &tmp) && |
| (!endptr || *endptr == '\n')) { |
| /* |
| * Sanity-check the value, if it's too big (e.g., aarch64 with 64k base |
| * pages) or weird, fallback to something smaller. |
| */ |
| if (!tmp || !is_power_of_2(tmp) || tmp > 16 * MiB) { |
| warn_report("Read unsupported THP size: %" PRIx64, tmp); |
| } else { |
| thp_size = tmp; |
| } |
| } |
| |
| if (!thp_size) { |
| thp_size = VIRTIO_MEM_DEFAULT_THP_SIZE; |
| warn_report("Could not detect THP size, falling back to %" PRIx64 |
| " MiB.", thp_size / MiB); |
| } |
| |
| g_free(content); |
| return thp_size; |
| } |
| |
| static uint64_t virtio_mem_default_block_size(RAMBlock *rb) |
| { |
| const uint64_t page_size = qemu_ram_pagesize(rb); |
| |
| /* We can have hugetlbfs with a page size smaller than the THP size. */ |
| if (page_size == qemu_real_host_page_size) { |
| return MAX(page_size, virtio_mem_thp_size()); |
| } |
| return MAX(page_size, VIRTIO_MEM_MIN_BLOCK_SIZE); |
| } |
| |
| /* |
| * Size the usable region bigger than the requested size if possible. Esp. |
| * Linux guests will only add (aligned) memory blocks in case they fully |
| * fit into the usable region, but plug+online only a subset of the pages. |
| * The memory block size corresponds mostly to the section size. |
| * |
| * This allows e.g., to add 20MB with a section size of 128MB on x86_64, and |
| * a section size of 1GB on arm64 (as long as the start address is properly |
| * aligned, similar to ordinary DIMMs). |
| * |
| * We can change this at any time and maybe even make it configurable if |
| * necessary (as the section size can change). But it's more likely that the |
| * section size will rather get smaller and not bigger over time. |
| */ |
| #if defined(TARGET_X86_64) || defined(TARGET_I386) |
| #define VIRTIO_MEM_USABLE_EXTENT (2 * (128 * MiB)) |
| #else |
| #error VIRTIO_MEM_USABLE_EXTENT not defined |
| #endif |
| |
| static bool virtio_mem_is_busy(void) |
| { |
| /* |
| * Postcopy cannot handle concurrent discards and we don't want to migrate |
| * pages on-demand with stale content when plugging new blocks. |
| * |
| * For precopy, we don't want unplugged blocks in our migration stream, and |
| * when plugging new blocks, the page content might differ between source |
| * and destination (observable by the guest when not initializing pages |
| * after plugging them) until we're running on the destination (as we didn't |
| * migrate these blocks when they were unplugged). |
| */ |
| return migration_in_incoming_postcopy() || !migration_is_idle(); |
| } |
| |
| typedef int (*virtio_mem_range_cb)(const VirtIOMEM *vmem, void *arg, |
| uint64_t offset, uint64_t size); |
| |
| static int virtio_mem_for_each_unplugged_range(const VirtIOMEM *vmem, void *arg, |
| virtio_mem_range_cb cb) |
| { |
| unsigned long first_zero_bit, last_zero_bit; |
| uint64_t offset, size; |
| int ret = 0; |
| |
| first_zero_bit = find_first_zero_bit(vmem->bitmap, vmem->bitmap_size); |
| while (first_zero_bit < vmem->bitmap_size) { |
| offset = first_zero_bit * vmem->block_size; |
| last_zero_bit = find_next_bit(vmem->bitmap, vmem->bitmap_size, |
| first_zero_bit + 1) - 1; |
| size = (last_zero_bit - first_zero_bit + 1) * vmem->block_size; |
| |
| ret = cb(vmem, arg, offset, size); |
| if (ret) { |
| break; |
| } |
| first_zero_bit = find_next_zero_bit(vmem->bitmap, vmem->bitmap_size, |
| last_zero_bit + 2); |
| } |
| return ret; |
| } |
| |
| /* |
| * Adjust the memory section to cover the intersection with the given range. |
| * |
| * Returns false if the intersection is empty, otherwise returns true. |
| */ |
| static bool virito_mem_intersect_memory_section(MemoryRegionSection *s, |
| uint64_t offset, uint64_t size) |
| { |
| uint64_t start = MAX(s->offset_within_region, offset); |
| uint64_t end = MIN(s->offset_within_region + int128_get64(s->size), |
| offset + size); |
| |
| if (end <= start) { |
| return false; |
| } |
| |
| s->offset_within_address_space += start - s->offset_within_region; |
| s->offset_within_region = start; |
| s->size = int128_make64(end - start); |
| return true; |
| } |
| |
| typedef int (*virtio_mem_section_cb)(MemoryRegionSection *s, void *arg); |
| |
| static int virtio_mem_for_each_plugged_section(const VirtIOMEM *vmem, |
| MemoryRegionSection *s, |
| void *arg, |
| virtio_mem_section_cb cb) |
| { |
| unsigned long first_bit, last_bit; |
| uint64_t offset, size; |
| int ret = 0; |
| |
| first_bit = s->offset_within_region / vmem->bitmap_size; |
| first_bit = find_next_bit(vmem->bitmap, vmem->bitmap_size, first_bit); |
| while (first_bit < vmem->bitmap_size) { |
| MemoryRegionSection tmp = *s; |
| |
| offset = first_bit * vmem->block_size; |
| last_bit = find_next_zero_bit(vmem->bitmap, vmem->bitmap_size, |
| first_bit + 1) - 1; |
| size = (last_bit - first_bit + 1) * vmem->block_size; |
| |
| if (!virito_mem_intersect_memory_section(&tmp, offset, size)) { |
| break; |
| } |
| ret = cb(&tmp, arg); |
| if (ret) { |
| break; |
| } |
| first_bit = find_next_bit(vmem->bitmap, vmem->bitmap_size, |
| last_bit + 2); |
| } |
| return ret; |
| } |
| |
| static int virtio_mem_notify_populate_cb(MemoryRegionSection *s, void *arg) |
| { |
| RamDiscardListener *rdl = arg; |
| |
| return rdl->notify_populate(rdl, s); |
| } |
| |
| static int virtio_mem_notify_discard_cb(MemoryRegionSection *s, void *arg) |
| { |
| RamDiscardListener *rdl = arg; |
| |
| rdl->notify_discard(rdl, s); |
| return 0; |
| } |
| |
| static void virtio_mem_notify_unplug(VirtIOMEM *vmem, uint64_t offset, |
| uint64_t size) |
| { |
| RamDiscardListener *rdl; |
| |
| QLIST_FOREACH(rdl, &vmem->rdl_list, next) { |
| MemoryRegionSection tmp = *rdl->section; |
| |
| if (!virito_mem_intersect_memory_section(&tmp, offset, size)) { |
| continue; |
| } |
| rdl->notify_discard(rdl, &tmp); |
| } |
| } |
| |
| static int virtio_mem_notify_plug(VirtIOMEM *vmem, uint64_t offset, |
| uint64_t size) |
| { |
| RamDiscardListener *rdl, *rdl2; |
| int ret = 0; |
| |
| QLIST_FOREACH(rdl, &vmem->rdl_list, next) { |
| MemoryRegionSection tmp = *rdl->section; |
| |
| if (!virito_mem_intersect_memory_section(&tmp, offset, size)) { |
| continue; |
| } |
| ret = rdl->notify_populate(rdl, &tmp); |
| if (ret) { |
| break; |
| } |
| } |
| |
| if (ret) { |
| /* Notify all already-notified listeners. */ |
| QLIST_FOREACH(rdl2, &vmem->rdl_list, next) { |
| MemoryRegionSection tmp = *rdl->section; |
| |
| if (rdl2 == rdl) { |
| break; |
| } |
| if (!virito_mem_intersect_memory_section(&tmp, offset, size)) { |
| continue; |
| } |
| rdl2->notify_discard(rdl2, &tmp); |
| } |
| } |
| return ret; |
| } |
| |
| static void virtio_mem_notify_unplug_all(VirtIOMEM *vmem) |
| { |
| RamDiscardListener *rdl; |
| |
| if (!vmem->size) { |
| return; |
| } |
| |
| QLIST_FOREACH(rdl, &vmem->rdl_list, next) { |
| if (rdl->double_discard_supported) { |
| rdl->notify_discard(rdl, rdl->section); |
| } else { |
| virtio_mem_for_each_plugged_section(vmem, rdl->section, rdl, |
| virtio_mem_notify_discard_cb); |
| } |
| } |
| } |
| |
| static bool virtio_mem_test_bitmap(const VirtIOMEM *vmem, uint64_t start_gpa, |
| uint64_t size, bool plugged) |
| { |
| const unsigned long first_bit = (start_gpa - vmem->addr) / vmem->block_size; |
| const unsigned long last_bit = first_bit + (size / vmem->block_size) - 1; |
| unsigned long found_bit; |
| |
| /* We fake a shorter bitmap to avoid searching too far. */ |
| if (plugged) { |
| found_bit = find_next_zero_bit(vmem->bitmap, last_bit + 1, first_bit); |
| } else { |
| found_bit = find_next_bit(vmem->bitmap, last_bit + 1, first_bit); |
| } |
| return found_bit > last_bit; |
| } |
| |
| static void virtio_mem_set_bitmap(VirtIOMEM *vmem, uint64_t start_gpa, |
| uint64_t size, bool plugged) |
| { |
| const unsigned long bit = (start_gpa - vmem->addr) / vmem->block_size; |
| const unsigned long nbits = size / vmem->block_size; |
| |
| if (plugged) { |
| bitmap_set(vmem->bitmap, bit, nbits); |
| } else { |
| bitmap_clear(vmem->bitmap, bit, nbits); |
| } |
| } |
| |
| static void virtio_mem_send_response(VirtIOMEM *vmem, VirtQueueElement *elem, |
| struct virtio_mem_resp *resp) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(vmem); |
| VirtQueue *vq = vmem->vq; |
| |
| trace_virtio_mem_send_response(le16_to_cpu(resp->type)); |
| iov_from_buf(elem->in_sg, elem->in_num, 0, resp, sizeof(*resp)); |
| |
| virtqueue_push(vq, elem, sizeof(*resp)); |
| virtio_notify(vdev, vq); |
| } |
| |
| static void virtio_mem_send_response_simple(VirtIOMEM *vmem, |
| VirtQueueElement *elem, |
| uint16_t type) |
| { |
| struct virtio_mem_resp resp = { |
| .type = cpu_to_le16(type), |
| }; |
| |
| virtio_mem_send_response(vmem, elem, &resp); |
| } |
| |
| static bool virtio_mem_valid_range(const VirtIOMEM *vmem, uint64_t gpa, |
| uint64_t size) |
| { |
| if (!QEMU_IS_ALIGNED(gpa, vmem->block_size)) { |
| return false; |
| } |
| if (gpa + size < gpa || !size) { |
| return false; |
| } |
| if (gpa < vmem->addr || gpa >= vmem->addr + vmem->usable_region_size) { |
| return false; |
| } |
| if (gpa + size > vmem->addr + vmem->usable_region_size) { |
| return false; |
| } |
| return true; |
| } |
| |
| static int virtio_mem_set_block_state(VirtIOMEM *vmem, uint64_t start_gpa, |
| uint64_t size, bool plug) |
| { |
| const uint64_t offset = start_gpa - vmem->addr; |
| RAMBlock *rb = vmem->memdev->mr.ram_block; |
| |
| if (virtio_mem_is_busy()) { |
| return -EBUSY; |
| } |
| |
| if (!plug) { |
| if (ram_block_discard_range(rb, offset, size)) { |
| return -EBUSY; |
| } |
| virtio_mem_notify_unplug(vmem, offset, size); |
| } else if (virtio_mem_notify_plug(vmem, offset, size)) { |
| /* Could be a mapping attempt resulted in memory getting populated. */ |
| ram_block_discard_range(vmem->memdev->mr.ram_block, offset, size); |
| return -EBUSY; |
| } |
| virtio_mem_set_bitmap(vmem, start_gpa, size, plug); |
| return 0; |
| } |
| |
| static int virtio_mem_state_change_request(VirtIOMEM *vmem, uint64_t gpa, |
| uint16_t nb_blocks, bool plug) |
| { |
| const uint64_t size = nb_blocks * vmem->block_size; |
| int ret; |
| |
| if (!virtio_mem_valid_range(vmem, gpa, size)) { |
| return VIRTIO_MEM_RESP_ERROR; |
| } |
| |
| if (plug && (vmem->size + size > vmem->requested_size)) { |
| return VIRTIO_MEM_RESP_NACK; |
| } |
| |
| /* test if really all blocks are in the opposite state */ |
| if (!virtio_mem_test_bitmap(vmem, gpa, size, !plug)) { |
| return VIRTIO_MEM_RESP_ERROR; |
| } |
| |
| ret = virtio_mem_set_block_state(vmem, gpa, size, plug); |
| if (ret) { |
| return VIRTIO_MEM_RESP_BUSY; |
| } |
| if (plug) { |
| vmem->size += size; |
| } else { |
| vmem->size -= size; |
| } |
| notifier_list_notify(&vmem->size_change_notifiers, &vmem->size); |
| return VIRTIO_MEM_RESP_ACK; |
| } |
| |
| static void virtio_mem_plug_request(VirtIOMEM *vmem, VirtQueueElement *elem, |
| struct virtio_mem_req *req) |
| { |
| const uint64_t gpa = le64_to_cpu(req->u.plug.addr); |
| const uint16_t nb_blocks = le16_to_cpu(req->u.plug.nb_blocks); |
| uint16_t type; |
| |
| trace_virtio_mem_plug_request(gpa, nb_blocks); |
| type = virtio_mem_state_change_request(vmem, gpa, nb_blocks, true); |
| virtio_mem_send_response_simple(vmem, elem, type); |
| } |
| |
| static void virtio_mem_unplug_request(VirtIOMEM *vmem, VirtQueueElement *elem, |
| struct virtio_mem_req *req) |
| { |
| const uint64_t gpa = le64_to_cpu(req->u.unplug.addr); |
| const uint16_t nb_blocks = le16_to_cpu(req->u.unplug.nb_blocks); |
| uint16_t type; |
| |
| trace_virtio_mem_unplug_request(gpa, nb_blocks); |
| type = virtio_mem_state_change_request(vmem, gpa, nb_blocks, false); |
| virtio_mem_send_response_simple(vmem, elem, type); |
| } |
| |
| static void virtio_mem_resize_usable_region(VirtIOMEM *vmem, |
| uint64_t requested_size, |
| bool can_shrink) |
| { |
| uint64_t newsize = MIN(memory_region_size(&vmem->memdev->mr), |
| requested_size + VIRTIO_MEM_USABLE_EXTENT); |
| |
| /* The usable region size always has to be multiples of the block size. */ |
| newsize = QEMU_ALIGN_UP(newsize, vmem->block_size); |
| |
| if (!requested_size) { |
| newsize = 0; |
| } |
| |
| if (newsize < vmem->usable_region_size && !can_shrink) { |
| return; |
| } |
| |
| trace_virtio_mem_resized_usable_region(vmem->usable_region_size, newsize); |
| vmem->usable_region_size = newsize; |
| } |
| |
| static int virtio_mem_unplug_all(VirtIOMEM *vmem) |
| { |
| RAMBlock *rb = vmem->memdev->mr.ram_block; |
| |
| if (virtio_mem_is_busy()) { |
| return -EBUSY; |
| } |
| |
| if (ram_block_discard_range(rb, 0, qemu_ram_get_used_length(rb))) { |
| return -EBUSY; |
| } |
| virtio_mem_notify_unplug_all(vmem); |
| |
| bitmap_clear(vmem->bitmap, 0, vmem->bitmap_size); |
| if (vmem->size) { |
| vmem->size = 0; |
| notifier_list_notify(&vmem->size_change_notifiers, &vmem->size); |
| } |
| trace_virtio_mem_unplugged_all(); |
| virtio_mem_resize_usable_region(vmem, vmem->requested_size, true); |
| return 0; |
| } |
| |
| static void virtio_mem_unplug_all_request(VirtIOMEM *vmem, |
| VirtQueueElement *elem) |
| { |
| trace_virtio_mem_unplug_all_request(); |
| if (virtio_mem_unplug_all(vmem)) { |
| virtio_mem_send_response_simple(vmem, elem, VIRTIO_MEM_RESP_BUSY); |
| } else { |
| virtio_mem_send_response_simple(vmem, elem, VIRTIO_MEM_RESP_ACK); |
| } |
| } |
| |
| static void virtio_mem_state_request(VirtIOMEM *vmem, VirtQueueElement *elem, |
| struct virtio_mem_req *req) |
| { |
| const uint16_t nb_blocks = le16_to_cpu(req->u.state.nb_blocks); |
| const uint64_t gpa = le64_to_cpu(req->u.state.addr); |
| const uint64_t size = nb_blocks * vmem->block_size; |
| struct virtio_mem_resp resp = { |
| .type = cpu_to_le16(VIRTIO_MEM_RESP_ACK), |
| }; |
| |
| trace_virtio_mem_state_request(gpa, nb_blocks); |
| if (!virtio_mem_valid_range(vmem, gpa, size)) { |
| virtio_mem_send_response_simple(vmem, elem, VIRTIO_MEM_RESP_ERROR); |
| return; |
| } |
| |
| if (virtio_mem_test_bitmap(vmem, gpa, size, true)) { |
| resp.u.state.state = cpu_to_le16(VIRTIO_MEM_STATE_PLUGGED); |
| } else if (virtio_mem_test_bitmap(vmem, gpa, size, false)) { |
| resp.u.state.state = cpu_to_le16(VIRTIO_MEM_STATE_UNPLUGGED); |
| } else { |
| resp.u.state.state = cpu_to_le16(VIRTIO_MEM_STATE_MIXED); |
| } |
| trace_virtio_mem_state_response(le16_to_cpu(resp.u.state.state)); |
| virtio_mem_send_response(vmem, elem, &resp); |
| } |
| |
| static void virtio_mem_handle_request(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| const int len = sizeof(struct virtio_mem_req); |
| VirtIOMEM *vmem = VIRTIO_MEM(vdev); |
| VirtQueueElement *elem; |
| struct virtio_mem_req req; |
| uint16_t type; |
| |
| while (true) { |
| elem = virtqueue_pop(vq, sizeof(VirtQueueElement)); |
| if (!elem) { |
| return; |
| } |
| |
| if (iov_to_buf(elem->out_sg, elem->out_num, 0, &req, len) < len) { |
| virtio_error(vdev, "virtio-mem protocol violation: invalid request" |
| " size: %d", len); |
| virtqueue_detach_element(vq, elem, 0); |
| g_free(elem); |
| return; |
| } |
| |
| if (iov_size(elem->in_sg, elem->in_num) < |
| sizeof(struct virtio_mem_resp)) { |
| virtio_error(vdev, "virtio-mem protocol violation: not enough space" |
| " for response: %zu", |
| iov_size(elem->in_sg, elem->in_num)); |
| virtqueue_detach_element(vq, elem, 0); |
| g_free(elem); |
| return; |
| } |
| |
| type = le16_to_cpu(req.type); |
| switch (type) { |
| case VIRTIO_MEM_REQ_PLUG: |
| virtio_mem_plug_request(vmem, elem, &req); |
| break; |
| case VIRTIO_MEM_REQ_UNPLUG: |
| virtio_mem_unplug_request(vmem, elem, &req); |
| break; |
| case VIRTIO_MEM_REQ_UNPLUG_ALL: |
| virtio_mem_unplug_all_request(vmem, elem); |
| break; |
| case VIRTIO_MEM_REQ_STATE: |
| virtio_mem_state_request(vmem, elem, &req); |
| break; |
| default: |
| virtio_error(vdev, "virtio-mem protocol violation: unknown request" |
| " type: %d", type); |
| virtqueue_detach_element(vq, elem, 0); |
| g_free(elem); |
| return; |
| } |
| |
| g_free(elem); |
| } |
| } |
| |
| static void virtio_mem_get_config(VirtIODevice *vdev, uint8_t *config_data) |
| { |
| VirtIOMEM *vmem = VIRTIO_MEM(vdev); |
| struct virtio_mem_config *config = (void *) config_data; |
| |
| config->block_size = cpu_to_le64(vmem->block_size); |
| config->node_id = cpu_to_le16(vmem->node); |
| config->requested_size = cpu_to_le64(vmem->requested_size); |
| config->plugged_size = cpu_to_le64(vmem->size); |
| config->addr = cpu_to_le64(vmem->addr); |
| config->region_size = cpu_to_le64(memory_region_size(&vmem->memdev->mr)); |
| config->usable_region_size = cpu_to_le64(vmem->usable_region_size); |
| } |
| |
| static uint64_t virtio_mem_get_features(VirtIODevice *vdev, uint64_t features, |
| Error **errp) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| |
| if (ms->numa_state) { |
| #if defined(CONFIG_ACPI) |
| virtio_add_feature(&features, VIRTIO_MEM_F_ACPI_PXM); |
| #endif |
| } |
| return features; |
| } |
| |
| static void virtio_mem_system_reset(void *opaque) |
| { |
| VirtIOMEM *vmem = VIRTIO_MEM(opaque); |
| |
| /* |
| * During usual resets, we will unplug all memory and shrink the usable |
| * region size. This is, however, not possible in all scenarios. Then, |
| * the guest has to deal with this manually (VIRTIO_MEM_REQ_UNPLUG_ALL). |
| */ |
| virtio_mem_unplug_all(vmem); |
| } |
| |
| static void virtio_mem_device_realize(DeviceState *dev, Error **errp) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| int nb_numa_nodes = ms->numa_state ? ms->numa_state->num_nodes : 0; |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VirtIOMEM *vmem = VIRTIO_MEM(dev); |
| uint64_t page_size; |
| RAMBlock *rb; |
| int ret; |
| |
| if (!vmem->memdev) { |
| error_setg(errp, "'%s' property is not set", VIRTIO_MEM_MEMDEV_PROP); |
| return; |
| } else if (host_memory_backend_is_mapped(vmem->memdev)) { |
| error_setg(errp, "'%s' property specifies a busy memdev: %s", |
| VIRTIO_MEM_MEMDEV_PROP, |
| object_get_canonical_path_component(OBJECT(vmem->memdev))); |
| return; |
| } else if (!memory_region_is_ram(&vmem->memdev->mr) || |
| memory_region_is_rom(&vmem->memdev->mr) || |
| !vmem->memdev->mr.ram_block) { |
| error_setg(errp, "'%s' property specifies an unsupported memdev", |
| VIRTIO_MEM_MEMDEV_PROP); |
| return; |
| } |
| |
| if ((nb_numa_nodes && vmem->node >= nb_numa_nodes) || |
| (!nb_numa_nodes && vmem->node)) { |
| error_setg(errp, "'%s' property has value '%" PRIu32 "', which exceeds" |
| "the number of numa nodes: %d", VIRTIO_MEM_NODE_PROP, |
| vmem->node, nb_numa_nodes ? nb_numa_nodes : 1); |
| return; |
| } |
| |
| if (enable_mlock) { |
| error_setg(errp, "Incompatible with mlock"); |
| return; |
| } |
| |
| rb = vmem->memdev->mr.ram_block; |
| page_size = qemu_ram_pagesize(rb); |
| |
| /* |
| * If the block size wasn't configured by the user, use a sane default. This |
| * allows using hugetlbfs backends of any page size without manual |
| * intervention. |
| */ |
| if (!vmem->block_size) { |
| vmem->block_size = virtio_mem_default_block_size(rb); |
| } |
| |
| if (vmem->block_size < page_size) { |
| error_setg(errp, "'%s' property has to be at least the page size (0x%" |
| PRIx64 ")", VIRTIO_MEM_BLOCK_SIZE_PROP, page_size); |
| return; |
| } else if (vmem->block_size < virtio_mem_default_block_size(rb)) { |
| warn_report("'%s' property is smaller than the default block size (%" |
| PRIx64 " MiB)", VIRTIO_MEM_BLOCK_SIZE_PROP, |
| virtio_mem_default_block_size(rb) / MiB); |
| } else if (!QEMU_IS_ALIGNED(vmem->requested_size, vmem->block_size)) { |
| error_setg(errp, "'%s' property has to be multiples of '%s' (0x%" PRIx64 |
| ")", VIRTIO_MEM_REQUESTED_SIZE_PROP, |
| VIRTIO_MEM_BLOCK_SIZE_PROP, vmem->block_size); |
| return; |
| } else if (!QEMU_IS_ALIGNED(vmem->addr, vmem->block_size)) { |
| error_setg(errp, "'%s' property has to be multiples of '%s' (0x%" PRIx64 |
| ")", VIRTIO_MEM_ADDR_PROP, VIRTIO_MEM_BLOCK_SIZE_PROP, |
| vmem->block_size); |
| return; |
| } else if (!QEMU_IS_ALIGNED(memory_region_size(&vmem->memdev->mr), |
| vmem->block_size)) { |
| error_setg(errp, "'%s' property memdev size has to be multiples of" |
| "'%s' (0x%" PRIx64 ")", VIRTIO_MEM_MEMDEV_PROP, |
| VIRTIO_MEM_BLOCK_SIZE_PROP, vmem->block_size); |
| return; |
| } |
| |
| if (ram_block_coordinated_discard_require(true)) { |
| error_setg(errp, "Discarding RAM is disabled"); |
| return; |
| } |
| |
| ret = ram_block_discard_range(rb, 0, qemu_ram_get_used_length(rb)); |
| if (ret) { |
| error_setg_errno(errp, -ret, "Unexpected error discarding RAM"); |
| ram_block_coordinated_discard_require(false); |
| return; |
| } |
| |
| virtio_mem_resize_usable_region(vmem, vmem->requested_size, true); |
| |
| vmem->bitmap_size = memory_region_size(&vmem->memdev->mr) / |
| vmem->block_size; |
| vmem->bitmap = bitmap_new(vmem->bitmap_size); |
| |
| virtio_init(vdev, TYPE_VIRTIO_MEM, VIRTIO_ID_MEM, |
| sizeof(struct virtio_mem_config)); |
| vmem->vq = virtio_add_queue(vdev, 128, virtio_mem_handle_request); |
| |
| host_memory_backend_set_mapped(vmem->memdev, true); |
| vmstate_register_ram(&vmem->memdev->mr, DEVICE(vmem)); |
| qemu_register_reset(virtio_mem_system_reset, vmem); |
| precopy_add_notifier(&vmem->precopy_notifier); |
| |
| /* |
| * Set ourselves as RamDiscardManager before the plug handler maps the |
| * memory region and exposes it via an address space. |
| */ |
| memory_region_set_ram_discard_manager(&vmem->memdev->mr, |
| RAM_DISCARD_MANAGER(vmem)); |
| } |
| |
| static void virtio_mem_device_unrealize(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VirtIOMEM *vmem = VIRTIO_MEM(dev); |
| |
| /* |
| * The unplug handler unmapped the memory region, it cannot be |
| * found via an address space anymore. Unset ourselves. |
| */ |
| memory_region_set_ram_discard_manager(&vmem->memdev->mr, NULL); |
| precopy_remove_notifier(&vmem->precopy_notifier); |
| qemu_unregister_reset(virtio_mem_system_reset, vmem); |
| vmstate_unregister_ram(&vmem->memdev->mr, DEVICE(vmem)); |
| host_memory_backend_set_mapped(vmem->memdev, false); |
| virtio_del_queue(vdev, 0); |
| virtio_cleanup(vdev); |
| g_free(vmem->bitmap); |
| ram_block_coordinated_discard_require(false); |
| } |
| |
| static int virtio_mem_discard_range_cb(const VirtIOMEM *vmem, void *arg, |
| uint64_t offset, uint64_t size) |
| { |
| RAMBlock *rb = vmem->memdev->mr.ram_block; |
| |
| return ram_block_discard_range(rb, offset, size) ? -EINVAL : 0; |
| } |
| |
| static int virtio_mem_restore_unplugged(VirtIOMEM *vmem) |
| { |
| /* Make sure all memory is really discarded after migration. */ |
| return virtio_mem_for_each_unplugged_range(vmem, NULL, |
| virtio_mem_discard_range_cb); |
| } |
| |
| static int virtio_mem_post_load(void *opaque, int version_id) |
| { |
| VirtIOMEM *vmem = VIRTIO_MEM(opaque); |
| RamDiscardListener *rdl; |
| int ret; |
| |
| /* |
| * We started out with all memory discarded and our memory region is mapped |
| * into an address space. Replay, now that we updated the bitmap. |
| */ |
| QLIST_FOREACH(rdl, &vmem->rdl_list, next) { |
| ret = virtio_mem_for_each_plugged_section(vmem, rdl->section, rdl, |
| virtio_mem_notify_populate_cb); |
| if (ret) { |
| return ret; |
| } |
| } |
| |
| if (migration_in_incoming_postcopy()) { |
| return 0; |
| } |
| |
| return virtio_mem_restore_unplugged(vmem); |
| } |
| |
| typedef struct VirtIOMEMMigSanityChecks { |
| VirtIOMEM *parent; |
| uint64_t addr; |
| uint64_t region_size; |
| uint64_t block_size; |
| uint32_t node; |
| } VirtIOMEMMigSanityChecks; |
| |
| static int virtio_mem_mig_sanity_checks_pre_save(void *opaque) |
| { |
| VirtIOMEMMigSanityChecks *tmp = opaque; |
| VirtIOMEM *vmem = tmp->parent; |
| |
| tmp->addr = vmem->addr; |
| tmp->region_size = memory_region_size(&vmem->memdev->mr); |
| tmp->block_size = vmem->block_size; |
| tmp->node = vmem->node; |
| return 0; |
| } |
| |
| static int virtio_mem_mig_sanity_checks_post_load(void *opaque, int version_id) |
| { |
| VirtIOMEMMigSanityChecks *tmp = opaque; |
| VirtIOMEM *vmem = tmp->parent; |
| const uint64_t new_region_size = memory_region_size(&vmem->memdev->mr); |
| |
| if (tmp->addr != vmem->addr) { |
| error_report("Property '%s' changed from 0x%" PRIx64 " to 0x%" PRIx64, |
| VIRTIO_MEM_ADDR_PROP, tmp->addr, vmem->addr); |
| return -EINVAL; |
| } |
| /* |
| * Note: Preparation for resizeable memory regions. The maximum size |
| * of the memory region must not change during migration. |
| */ |
| if (tmp->region_size != new_region_size) { |
| error_report("Property '%s' size changed from 0x%" PRIx64 " to 0x%" |
| PRIx64, VIRTIO_MEM_MEMDEV_PROP, tmp->region_size, |
| new_region_size); |
| return -EINVAL; |
| } |
| if (tmp->block_size != vmem->block_size) { |
| error_report("Property '%s' changed from 0x%" PRIx64 " to 0x%" PRIx64, |
| VIRTIO_MEM_BLOCK_SIZE_PROP, tmp->block_size, |
| vmem->block_size); |
| return -EINVAL; |
| } |
| if (tmp->node != vmem->node) { |
| error_report("Property '%s' changed from %" PRIu32 " to %" PRIu32, |
| VIRTIO_MEM_NODE_PROP, tmp->node, vmem->node); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_virtio_mem_sanity_checks = { |
| .name = "virtio-mem-device/sanity-checks", |
| .pre_save = virtio_mem_mig_sanity_checks_pre_save, |
| .post_load = virtio_mem_mig_sanity_checks_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT64(addr, VirtIOMEMMigSanityChecks), |
| VMSTATE_UINT64(region_size, VirtIOMEMMigSanityChecks), |
| VMSTATE_UINT64(block_size, VirtIOMEMMigSanityChecks), |
| VMSTATE_UINT32(node, VirtIOMEMMigSanityChecks), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static const VMStateDescription vmstate_virtio_mem_device = { |
| .name = "virtio-mem-device", |
| .minimum_version_id = 1, |
| .version_id = 1, |
| .priority = MIG_PRI_VIRTIO_MEM, |
| .post_load = virtio_mem_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_WITH_TMP(VirtIOMEM, VirtIOMEMMigSanityChecks, |
| vmstate_virtio_mem_sanity_checks), |
| VMSTATE_UINT64(usable_region_size, VirtIOMEM), |
| VMSTATE_UINT64(size, VirtIOMEM), |
| VMSTATE_UINT64(requested_size, VirtIOMEM), |
| VMSTATE_BITMAP(bitmap, VirtIOMEM, 0, bitmap_size), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static const VMStateDescription vmstate_virtio_mem = { |
| .name = "virtio-mem", |
| .minimum_version_id = 1, |
| .version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_VIRTIO_DEVICE, |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static void virtio_mem_fill_device_info(const VirtIOMEM *vmem, |
| VirtioMEMDeviceInfo *vi) |
| { |
| vi->memaddr = vmem->addr; |
| vi->node = vmem->node; |
| vi->requested_size = vmem->requested_size; |
| vi->size = vmem->size; |
| vi->max_size = memory_region_size(&vmem->memdev->mr); |
| vi->block_size = vmem->block_size; |
| vi->memdev = object_get_canonical_path(OBJECT(vmem->memdev)); |
| } |
| |
| static MemoryRegion *virtio_mem_get_memory_region(VirtIOMEM *vmem, Error **errp) |
| { |
| if (!vmem->memdev) { |
| error_setg(errp, "'%s' property must be set", VIRTIO_MEM_MEMDEV_PROP); |
| return NULL; |
| } |
| |
| return &vmem->memdev->mr; |
| } |
| |
| static void virtio_mem_add_size_change_notifier(VirtIOMEM *vmem, |
| Notifier *notifier) |
| { |
| notifier_list_add(&vmem->size_change_notifiers, notifier); |
| } |
| |
| static void virtio_mem_remove_size_change_notifier(VirtIOMEM *vmem, |
| Notifier *notifier) |
| { |
| notifier_remove(notifier); |
| } |
| |
| static void virtio_mem_get_size(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| const VirtIOMEM *vmem = VIRTIO_MEM(obj); |
| uint64_t value = vmem->size; |
| |
| visit_type_size(v, name, &value, errp); |
| } |
| |
| static void virtio_mem_get_requested_size(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| const VirtIOMEM *vmem = VIRTIO_MEM(obj); |
| uint64_t value = vmem->requested_size; |
| |
| visit_type_size(v, name, &value, errp); |
| } |
| |
| static void virtio_mem_set_requested_size(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| VirtIOMEM *vmem = VIRTIO_MEM(obj); |
| Error *err = NULL; |
| uint64_t value; |
| |
| visit_type_size(v, name, &value, &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| /* |
| * The block size and memory backend are not fixed until the device was |
| * realized. realize() will verify these properties then. |
| */ |
| if (DEVICE(obj)->realized) { |
| if (!QEMU_IS_ALIGNED(value, vmem->block_size)) { |
| error_setg(errp, "'%s' has to be multiples of '%s' (0x%" PRIx64 |
| ")", name, VIRTIO_MEM_BLOCK_SIZE_PROP, |
| vmem->block_size); |
| return; |
| } else if (value > memory_region_size(&vmem->memdev->mr)) { |
| error_setg(errp, "'%s' cannot exceed the memory backend size" |
| "(0x%" PRIx64 ")", name, |
| memory_region_size(&vmem->memdev->mr)); |
| return; |
| } |
| |
| if (value != vmem->requested_size) { |
| virtio_mem_resize_usable_region(vmem, value, false); |
| vmem->requested_size = value; |
| } |
| /* |
| * Trigger a config update so the guest gets notified. We trigger |
| * even if the size didn't change (especially helpful for debugging). |
| */ |
| virtio_notify_config(VIRTIO_DEVICE(vmem)); |
| } else { |
| vmem->requested_size = value; |
| } |
| } |
| |
| static void virtio_mem_get_block_size(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| const VirtIOMEM *vmem = VIRTIO_MEM(obj); |
| uint64_t value = vmem->block_size; |
| |
| /* |
| * If not configured by the user (and we're not realized yet), use the |
| * default block size we would use with the current memory backend. |
| */ |
| if (!value) { |
| if (vmem->memdev && memory_region_is_ram(&vmem->memdev->mr)) { |
| value = virtio_mem_default_block_size(vmem->memdev->mr.ram_block); |
| } else { |
| value = virtio_mem_thp_size(); |
| } |
| } |
| |
| visit_type_size(v, name, &value, errp); |
| } |
| |
| static void virtio_mem_set_block_size(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| VirtIOMEM *vmem = VIRTIO_MEM(obj); |
| Error *err = NULL; |
| uint64_t value; |
| |
| if (DEVICE(obj)->realized) { |
| error_setg(errp, "'%s' cannot be changed", name); |
| return; |
| } |
| |
| visit_type_size(v, name, &value, &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| if (value < VIRTIO_MEM_MIN_BLOCK_SIZE) { |
| error_setg(errp, "'%s' property has to be at least 0x%" PRIx32, name, |
| VIRTIO_MEM_MIN_BLOCK_SIZE); |
| return; |
| } else if (!is_power_of_2(value)) { |
| error_setg(errp, "'%s' property has to be a power of two", name); |
| return; |
| } |
| vmem->block_size = value; |
| } |
| |
| static int virtio_mem_precopy_exclude_range_cb(const VirtIOMEM *vmem, void *arg, |
| uint64_t offset, uint64_t size) |
| { |
| void * const host = qemu_ram_get_host_addr(vmem->memdev->mr.ram_block); |
| |
| qemu_guest_free_page_hint(host + offset, size); |
| return 0; |
| } |
| |
| static void virtio_mem_precopy_exclude_unplugged(VirtIOMEM *vmem) |
| { |
| virtio_mem_for_each_unplugged_range(vmem, NULL, |
| virtio_mem_precopy_exclude_range_cb); |
| } |
| |
| static int virtio_mem_precopy_notify(NotifierWithReturn *n, void *data) |
| { |
| VirtIOMEM *vmem = container_of(n, VirtIOMEM, precopy_notifier); |
| PrecopyNotifyData *pnd = data; |
| |
| switch (pnd->reason) { |
| case PRECOPY_NOTIFY_AFTER_BITMAP_SYNC: |
| virtio_mem_precopy_exclude_unplugged(vmem); |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void virtio_mem_instance_init(Object *obj) |
| { |
| VirtIOMEM *vmem = VIRTIO_MEM(obj); |
| |
| notifier_list_init(&vmem->size_change_notifiers); |
| vmem->precopy_notifier.notify = virtio_mem_precopy_notify; |
| QLIST_INIT(&vmem->rdl_list); |
| |
| object_property_add(obj, VIRTIO_MEM_SIZE_PROP, "size", virtio_mem_get_size, |
| NULL, NULL, NULL); |
| object_property_add(obj, VIRTIO_MEM_REQUESTED_SIZE_PROP, "size", |
| virtio_mem_get_requested_size, |
| virtio_mem_set_requested_size, NULL, NULL); |
| object_property_add(obj, VIRTIO_MEM_BLOCK_SIZE_PROP, "size", |
| virtio_mem_get_block_size, virtio_mem_set_block_size, |
| NULL, NULL); |
| } |
| |
| static Property virtio_mem_properties[] = { |
| DEFINE_PROP_UINT64(VIRTIO_MEM_ADDR_PROP, VirtIOMEM, addr, 0), |
| DEFINE_PROP_UINT32(VIRTIO_MEM_NODE_PROP, VirtIOMEM, node, 0), |
| DEFINE_PROP_LINK(VIRTIO_MEM_MEMDEV_PROP, VirtIOMEM, memdev, |
| TYPE_MEMORY_BACKEND, HostMemoryBackend *), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static uint64_t virtio_mem_rdm_get_min_granularity(const RamDiscardManager *rdm, |
| const MemoryRegion *mr) |
| { |
| const VirtIOMEM *vmem = VIRTIO_MEM(rdm); |
| |
| g_assert(mr == &vmem->memdev->mr); |
| return vmem->block_size; |
| } |
| |
| static bool virtio_mem_rdm_is_populated(const RamDiscardManager *rdm, |
| const MemoryRegionSection *s) |
| { |
| const VirtIOMEM *vmem = VIRTIO_MEM(rdm); |
| uint64_t start_gpa = vmem->addr + s->offset_within_region; |
| uint64_t end_gpa = start_gpa + int128_get64(s->size); |
| |
| g_assert(s->mr == &vmem->memdev->mr); |
| |
| start_gpa = QEMU_ALIGN_DOWN(start_gpa, vmem->block_size); |
| end_gpa = QEMU_ALIGN_UP(end_gpa, vmem->block_size); |
| |
| if (!virtio_mem_valid_range(vmem, start_gpa, end_gpa - start_gpa)) { |
| return false; |
| } |
| |
| return virtio_mem_test_bitmap(vmem, start_gpa, end_gpa - start_gpa, true); |
| } |
| |
| struct VirtIOMEMReplayData { |
| void *fn; |
| void *opaque; |
| }; |
| |
| static int virtio_mem_rdm_replay_populated_cb(MemoryRegionSection *s, void *arg) |
| { |
| struct VirtIOMEMReplayData *data = arg; |
| |
| return ((ReplayRamPopulate)data->fn)(s, data->opaque); |
| } |
| |
| static int virtio_mem_rdm_replay_populated(const RamDiscardManager *rdm, |
| MemoryRegionSection *s, |
| ReplayRamPopulate replay_fn, |
| void *opaque) |
| { |
| const VirtIOMEM *vmem = VIRTIO_MEM(rdm); |
| struct VirtIOMEMReplayData data = { |
| .fn = replay_fn, |
| .opaque = opaque, |
| }; |
| |
| g_assert(s->mr == &vmem->memdev->mr); |
| return virtio_mem_for_each_plugged_section(vmem, s, &data, |
| virtio_mem_rdm_replay_populated_cb); |
| } |
| |
| static void virtio_mem_rdm_register_listener(RamDiscardManager *rdm, |
| RamDiscardListener *rdl, |
| MemoryRegionSection *s) |
| { |
| VirtIOMEM *vmem = VIRTIO_MEM(rdm); |
| int ret; |
| |
| g_assert(s->mr == &vmem->memdev->mr); |
| rdl->section = memory_region_section_new_copy(s); |
| |
| QLIST_INSERT_HEAD(&vmem->rdl_list, rdl, next); |
| ret = virtio_mem_for_each_plugged_section(vmem, rdl->section, rdl, |
| virtio_mem_notify_populate_cb); |
| if (ret) { |
| error_report("%s: Replaying plugged ranges failed: %s", __func__, |
| strerror(-ret)); |
| } |
| } |
| |
| static void virtio_mem_rdm_unregister_listener(RamDiscardManager *rdm, |
| RamDiscardListener *rdl) |
| { |
| VirtIOMEM *vmem = VIRTIO_MEM(rdm); |
| |
| g_assert(rdl->section->mr == &vmem->memdev->mr); |
| if (vmem->size) { |
| if (rdl->double_discard_supported) { |
| rdl->notify_discard(rdl, rdl->section); |
| } else { |
| virtio_mem_for_each_plugged_section(vmem, rdl->section, rdl, |
| virtio_mem_notify_discard_cb); |
| } |
| } |
| |
| memory_region_section_free_copy(rdl->section); |
| rdl->section = NULL; |
| QLIST_REMOVE(rdl, next); |
| } |
| |
| static void virtio_mem_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); |
| VirtIOMEMClass *vmc = VIRTIO_MEM_CLASS(klass); |
| RamDiscardManagerClass *rdmc = RAM_DISCARD_MANAGER_CLASS(klass); |
| |
| device_class_set_props(dc, virtio_mem_properties); |
| dc->vmsd = &vmstate_virtio_mem; |
| |
| set_bit(DEVICE_CATEGORY_MISC, dc->categories); |
| vdc->realize = virtio_mem_device_realize; |
| vdc->unrealize = virtio_mem_device_unrealize; |
| vdc->get_config = virtio_mem_get_config; |
| vdc->get_features = virtio_mem_get_features; |
| vdc->vmsd = &vmstate_virtio_mem_device; |
| |
| vmc->fill_device_info = virtio_mem_fill_device_info; |
| vmc->get_memory_region = virtio_mem_get_memory_region; |
| vmc->add_size_change_notifier = virtio_mem_add_size_change_notifier; |
| vmc->remove_size_change_notifier = virtio_mem_remove_size_change_notifier; |
| |
| rdmc->get_min_granularity = virtio_mem_rdm_get_min_granularity; |
| rdmc->is_populated = virtio_mem_rdm_is_populated; |
| rdmc->replay_populated = virtio_mem_rdm_replay_populated; |
| rdmc->register_listener = virtio_mem_rdm_register_listener; |
| rdmc->unregister_listener = virtio_mem_rdm_unregister_listener; |
| } |
| |
| static const TypeInfo virtio_mem_info = { |
| .name = TYPE_VIRTIO_MEM, |
| .parent = TYPE_VIRTIO_DEVICE, |
| .instance_size = sizeof(VirtIOMEM), |
| .instance_init = virtio_mem_instance_init, |
| .class_init = virtio_mem_class_init, |
| .class_size = sizeof(VirtIOMEMClass), |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_RAM_DISCARD_MANAGER }, |
| { } |
| }, |
| }; |
| |
| static void virtio_register_types(void) |
| { |
| type_register_static(&virtio_mem_info); |
| } |
| |
| type_init(virtio_register_types) |