| /* |
| * Linux host USB redirector |
| * |
| * Copyright (c) 2005 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "qemu-common.h" |
| #include "hw/usb.h" |
| #include "console.h" |
| |
| #if defined(__linux__) |
| #include <dirent.h> |
| #include <sys/ioctl.h> |
| #include <linux/usbdevice_fs.h> |
| #include <linux/version.h> |
| #include <signal.h> |
| |
| /* We redefine it to avoid version problems */ |
| struct usb_ctrltransfer { |
| uint8_t bRequestType; |
| uint8_t bRequest; |
| uint16_t wValue; |
| uint16_t wIndex; |
| uint16_t wLength; |
| uint32_t timeout; |
| void *data; |
| }; |
| |
| typedef int USBScanFunc(void *opaque, int bus_num, int addr, int class_id, |
| int vendor_id, int product_id, |
| const char *product_name, int speed); |
| static int usb_host_find_device(int *pbus_num, int *paddr, |
| char *product_name, int product_name_size, |
| const char *devname); |
| |
| //#define DEBUG |
| //#define DEBUG_ISOCH |
| //#define USE_ASYNCIO |
| |
| #define USBDEVFS_PATH "/proc/bus/usb" |
| #define PRODUCT_NAME_SZ 32 |
| #define SIG_ISOCOMPLETE (SIGRTMIN+7) |
| #define MAX_ENDPOINTS 16 |
| |
| struct sigaction sigact; |
| |
| /* endpoint association data */ |
| struct endp_data { |
| uint8_t type; |
| }; |
| |
| /* FIXME: move USBPacket to PendingURB */ |
| typedef struct USBHostDevice { |
| USBDevice dev; |
| int fd; |
| int pipe_fds[2]; |
| USBPacket *packet; |
| struct endp_data endp_table[MAX_ENDPOINTS]; |
| int configuration; |
| uint8_t descr[1024]; |
| int descr_len; |
| int urbs_ready; |
| } USBHostDevice; |
| |
| typedef struct PendingURB { |
| struct usbdevfs_urb *urb; |
| int status; |
| struct PendingURB *next; |
| } PendingURB; |
| |
| static PendingURB *pending_urbs = NULL; |
| |
| static int add_pending_urb(struct usbdevfs_urb *urb) |
| { |
| PendingURB *purb = qemu_mallocz(sizeof(PendingURB)); |
| if (purb) { |
| purb->urb = urb; |
| purb->status = 0; |
| purb->next = pending_urbs; |
| pending_urbs = purb; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int del_pending_urb(struct usbdevfs_urb *urb) |
| { |
| PendingURB *purb = pending_urbs; |
| PendingURB *prev = NULL; |
| |
| while (purb && purb->urb != urb) { |
| prev = purb; |
| purb = purb->next; |
| } |
| |
| if (purb && purb->urb == urb) { |
| if (prev) { |
| prev->next = purb->next; |
| } else { |
| pending_urbs = purb->next; |
| } |
| qemu_free(purb); |
| return 1; |
| } |
| return 0; |
| } |
| |
| #ifdef USE_ASYNCIO |
| static PendingURB *get_pending_urb(struct usbdevfs_urb *urb) |
| { |
| PendingURB *purb = pending_urbs; |
| |
| while (purb && purb->urb != urb) { |
| purb = purb->next; |
| } |
| |
| if (purb && purb->urb == urb) { |
| return purb; |
| } |
| return NULL; |
| } |
| #endif |
| |
| static int usb_host_update_interfaces(USBHostDevice *dev, int configuration) |
| { |
| int dev_descr_len, config_descr_len; |
| int interface, nb_interfaces, nb_configurations; |
| int ret, i; |
| |
| if (configuration == 0) /* address state - ignore */ |
| return 1; |
| |
| i = 0; |
| dev_descr_len = dev->descr[0]; |
| if (dev_descr_len > dev->descr_len) |
| goto fail; |
| nb_configurations = dev->descr[17]; |
| |
| i += dev_descr_len; |
| while (i < dev->descr_len) { |
| #ifdef DEBUG |
| printf("i is %d, descr_len is %d, dl %d, dt %d\n", i, dev->descr_len, |
| dev->descr[i], dev->descr[i+1]); |
| #endif |
| if (dev->descr[i+1] != USB_DT_CONFIG) { |
| i += dev->descr[i]; |
| continue; |
| } |
| config_descr_len = dev->descr[i]; |
| |
| if (configuration == dev->descr[i + 5]) |
| break; |
| |
| i += config_descr_len; |
| } |
| |
| if (i >= dev->descr_len) { |
| printf("usb_host: error - device has no matching configuration\n"); |
| goto fail; |
| } |
| nb_interfaces = dev->descr[i + 4]; |
| |
| #ifdef USBDEVFS_DISCONNECT |
| /* earlier Linux 2.4 do not support that */ |
| { |
| struct usbdevfs_ioctl ctrl; |
| for (interface = 0; interface < nb_interfaces; interface++) { |
| ctrl.ioctl_code = USBDEVFS_DISCONNECT; |
| ctrl.ifno = interface; |
| ret = ioctl(dev->fd, USBDEVFS_IOCTL, &ctrl); |
| if (ret < 0 && errno != ENODATA) { |
| perror("USBDEVFS_DISCONNECT"); |
| goto fail; |
| } |
| } |
| } |
| #endif |
| |
| /* XXX: only grab if all interfaces are free */ |
| for (interface = 0; interface < nb_interfaces; interface++) { |
| ret = ioctl(dev->fd, USBDEVFS_CLAIMINTERFACE, &interface); |
| if (ret < 0) { |
| if (errno == EBUSY) { |
| fprintf(stderr, |
| "usb_host: warning - device already grabbed\n"); |
| } else { |
| perror("USBDEVFS_CLAIMINTERFACE"); |
| } |
| fail: |
| return 0; |
| } |
| } |
| |
| #ifdef DEBUG |
| printf("usb_host: %d interfaces claimed for configuration %d\n", |
| nb_interfaces, configuration); |
| #endif |
| |
| return 1; |
| } |
| |
| static void usb_host_handle_reset(USBDevice *dev) |
| { |
| #if 0 |
| USBHostDevice *s = (USBHostDevice *)dev; |
| /* USBDEVFS_RESET, but not the first time as it has already be |
| done by the host OS */ |
| ioctl(s->fd, USBDEVFS_RESET); |
| #endif |
| } |
| |
| static void usb_host_handle_destroy(USBDevice *dev) |
| { |
| USBHostDevice *s = (USBHostDevice *)dev; |
| |
| if (s->fd >= 0) |
| close(s->fd); |
| qemu_free(s); |
| } |
| |
| static int usb_linux_update_endp_table(USBHostDevice *s); |
| |
| static int usb_host_handle_control(USBDevice *dev, |
| int request, |
| int value, |
| int index, |
| int length, |
| uint8_t *data) |
| { |
| USBHostDevice *s = (USBHostDevice *)dev; |
| struct usb_ctrltransfer ct; |
| struct usbdevfs_setinterface si; |
| int intf_update_required = 0; |
| int ret; |
| |
| if (request == (DeviceOutRequest | USB_REQ_SET_ADDRESS)) { |
| /* specific SET_ADDRESS support */ |
| dev->addr = value; |
| return 0; |
| } else if (request == ((USB_RECIP_INTERFACE << 8) | |
| USB_REQ_SET_INTERFACE)) { |
| /* set alternate setting for the interface */ |
| si.interface = index; |
| si.altsetting = value; |
| ret = ioctl(s->fd, USBDEVFS_SETINTERFACE, &si); |
| usb_linux_update_endp_table(s); |
| } else if (request == (DeviceOutRequest | USB_REQ_SET_CONFIGURATION)) { |
| #ifdef DEBUG |
| printf("usb_host_handle_control: SET_CONFIGURATION request - " |
| "config %d\n", value & 0xff); |
| #endif |
| if (s->configuration != (value & 0xff)) { |
| s->configuration = (value & 0xff); |
| intf_update_required = 1; |
| } |
| goto do_request; |
| } else { |
| do_request: |
| ct.bRequestType = request >> 8; |
| ct.bRequest = request; |
| ct.wValue = value; |
| ct.wIndex = index; |
| ct.wLength = length; |
| ct.timeout = 50; |
| ct.data = data; |
| ret = ioctl(s->fd, USBDEVFS_CONTROL, &ct); |
| } |
| |
| if (ret < 0) { |
| switch(errno) { |
| case ETIMEDOUT: |
| return USB_RET_NAK; |
| default: |
| return USB_RET_STALL; |
| } |
| } else { |
| if (intf_update_required) { |
| #ifdef DEBUG |
| printf("usb_host_handle_control: updating interfaces\n"); |
| #endif |
| usb_host_update_interfaces(s, value & 0xff); |
| } |
| return ret; |
| } |
| } |
| |
| static int usb_host_handle_isoch(USBDevice *dev, USBPacket *p); |
| |
| static int usb_host_handle_data(USBDevice *dev, USBPacket *p) |
| { |
| USBHostDevice *s = (USBHostDevice *)dev; |
| struct usbdevfs_bulktransfer bt; |
| int ret; |
| uint8_t devep = p->devep; |
| |
| if (s->endp_table[p->devep - 1].type == USBDEVFS_URB_TYPE_ISO) { |
| return usb_host_handle_isoch(dev, p); |
| } |
| |
| /* XXX: optimize and handle all data types by looking at the |
| config descriptor */ |
| if (p->pid == USB_TOKEN_IN) |
| devep |= 0x80; |
| bt.ep = devep; |
| bt.len = p->len; |
| bt.timeout = 50; |
| bt.data = p->data; |
| ret = ioctl(s->fd, USBDEVFS_BULK, &bt); |
| if (ret < 0) { |
| switch(errno) { |
| case ETIMEDOUT: |
| return USB_RET_NAK; |
| case EPIPE: |
| default: |
| #ifdef DEBUG |
| printf("handle_data: errno=%d\n", errno); |
| #endif |
| return USB_RET_STALL; |
| } |
| } else { |
| return ret; |
| } |
| } |
| |
| #ifdef USE_ASYNCIO |
| static void urb_completion_pipe_read(void *opaque) |
| { |
| USBHostDevice *s = opaque; |
| USBPacket *p = s->packet; |
| PendingURB *pending_urb = NULL; |
| struct usbdevfs_urb *purb = NULL; |
| int len, ret; |
| |
| len = read(s->pipe_fds[0], &pending_urb, sizeof(pending_urb)); |
| if (len != sizeof(pending_urb)) { |
| printf("urb_completion: error reading pending_urb, len=%d\n", len); |
| return; |
| } |
| |
| /* FIXME: handle pending_urb->status */ |
| del_pending_urb(pending_urb->urb); |
| |
| if (!p) { |
| s->urbs_ready++; |
| return; |
| } |
| |
| ret = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &purb); |
| if (ret < 0) { |
| printf("urb_completion: REAPURBNDELAY ioctl=%d errno=%d\n", |
| ret, errno); |
| return; |
| } |
| |
| #ifdef DEBUG_ISOCH |
| if (purb == pending_urb->urb) { |
| printf("urb_completion: urb mismatch reaped=%p pending=%p\n", |
| purb, urb); |
| } |
| #endif |
| |
| p->len = purb->actual_length; |
| usb_packet_complete(p); |
| qemu_free(purb); |
| s->packet = NULL; |
| } |
| |
| static void isoch_done(int signum, siginfo_t *info, void *context) |
| { |
| struct usbdevfs_urb *urb = (struct usbdevfs_urb *)info->si_addr; |
| USBHostDevice *s = (USBHostDevice *)urb->usercontext; |
| PendingURB *purb; |
| |
| if (info->si_code != SI_ASYNCIO || |
| info->si_signo != SIG_ISOCOMPLETE) { |
| return; |
| } |
| |
| purb = get_pending_urb(urb); |
| if (purb) { |
| purb->status = info->si_errno; |
| write(s->pipe_fds[1], &purb, sizeof(purb)); |
| } |
| } |
| #endif |
| |
| static int usb_host_handle_isoch(USBDevice *dev, USBPacket *p) |
| { |
| USBHostDevice *s = (USBHostDevice *)dev; |
| struct usbdevfs_urb *urb, *purb = NULL; |
| int ret; |
| uint8_t devep = p->devep; |
| |
| if (p->pid == USB_TOKEN_IN) |
| devep |= 0x80; |
| |
| urb = qemu_mallocz(sizeof(struct usbdevfs_urb) + |
| sizeof(struct usbdevfs_iso_packet_desc)); |
| if (!urb) { |
| printf("usb_host_handle_isoch: malloc failed\n"); |
| return 0; |
| } |
| |
| urb->type = USBDEVFS_URB_TYPE_ISO; |
| urb->endpoint = devep; |
| urb->status = 0; |
| urb->flags = USBDEVFS_URB_ISO_ASAP; |
| urb->buffer = p->data; |
| urb->buffer_length = p->len; |
| urb->actual_length = 0; |
| urb->start_frame = 0; |
| urb->error_count = 0; |
| #ifdef USE_ASYNCIO |
| urb->signr = SIG_ISOCOMPLETE; |
| #else |
| urb->signr = 0; |
| #endif |
| urb->usercontext = s; |
| urb->number_of_packets = 1; |
| urb->iso_frame_desc[0].length = p->len; |
| urb->iso_frame_desc[0].actual_length = 0; |
| urb->iso_frame_desc[0].status = 0; |
| ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb); |
| if (ret == 0) { |
| if (!add_pending_urb(urb)) { |
| printf("usb_host_handle_isoch: add_pending_urb failed %p\n", urb); |
| } |
| } else { |
| printf("usb_host_handle_isoch: SUBMITURB ioctl=%d errno=%d\n", |
| ret, errno); |
| qemu_free(urb); |
| switch(errno) { |
| case ETIMEDOUT: |
| return USB_RET_NAK; |
| case EPIPE: |
| default: |
| return USB_RET_STALL; |
| } |
| } |
| #ifdef USE_ASYNCIO |
| /* FIXME: handle urbs_ready together with sync io |
| * workaround for injecting the signaled urbs into current frame */ |
| if (s->urbs_ready > 0) { |
| ret = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &purb); |
| if (ret == 0) { |
| ret = purb->actual_length; |
| qemu_free(purb); |
| s->urbs_ready--; |
| } |
| return ret; |
| } |
| s->packet = p; |
| return USB_RET_ASYNC; |
| #else |
| ret = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &purb); |
| if (ret == 0) { |
| if (del_pending_urb(purb)) { |
| ret = purb->actual_length; |
| qemu_free(purb); |
| } else { |
| printf("usb_host_handle_isoch: del_pending_urb failed %p\n", purb); |
| } |
| } else { |
| #ifdef DEBUG_ISOCH |
| printf("usb_host_handle_isoch: REAPURBNDELAY ioctl=%d errno=%d\n", |
| ret, errno); |
| #endif |
| } |
| return ret; |
| #endif |
| } |
| |
| /* returns 1 on problem encountered or 0 for success */ |
| static int usb_linux_update_endp_table(USBHostDevice *s) |
| { |
| uint8_t *descriptors; |
| uint8_t devep, type, configuration, alt_interface; |
| struct usb_ctrltransfer ct; |
| int interface, ret, length, i; |
| |
| ct.bRequestType = USB_DIR_IN; |
| ct.bRequest = USB_REQ_GET_CONFIGURATION; |
| ct.wValue = 0; |
| ct.wIndex = 0; |
| ct.wLength = 1; |
| ct.data = &configuration; |
| ct.timeout = 50; |
| |
| ret = ioctl(s->fd, USBDEVFS_CONTROL, &ct); |
| if (ret < 0) { |
| perror("usb_linux_update_endp_table"); |
| return 1; |
| } |
| |
| /* in address state */ |
| if (configuration == 0) |
| return 1; |
| |
| /* get the desired configuration, interface, and endpoint descriptors |
| * from device description */ |
| descriptors = &s->descr[18]; |
| length = s->descr_len - 18; |
| i = 0; |
| |
| if (descriptors[i + 1] != USB_DT_CONFIG || |
| descriptors[i + 5] != configuration) { |
| printf("invalid descriptor data - configuration\n"); |
| return 1; |
| } |
| i += descriptors[i]; |
| |
| while (i < length) { |
| if (descriptors[i + 1] != USB_DT_INTERFACE || |
| (descriptors[i + 1] == USB_DT_INTERFACE && |
| descriptors[i + 4] == 0)) { |
| i += descriptors[i]; |
| continue; |
| } |
| |
| interface = descriptors[i + 2]; |
| |
| ct.bRequestType = USB_DIR_IN | USB_RECIP_INTERFACE; |
| ct.bRequest = USB_REQ_GET_INTERFACE; |
| ct.wValue = 0; |
| ct.wIndex = interface; |
| ct.wLength = 1; |
| ct.data = &alt_interface; |
| ct.timeout = 50; |
| |
| ret = ioctl(s->fd, USBDEVFS_CONTROL, &ct); |
| if (ret < 0) { |
| perror("usb_linux_update_endp_table"); |
| return 1; |
| } |
| |
| /* the current interface descriptor is the active interface |
| * and has endpoints */ |
| if (descriptors[i + 3] != alt_interface) { |
| i += descriptors[i]; |
| continue; |
| } |
| |
| /* advance to the endpoints */ |
| while (i < length && descriptors[i +1] != USB_DT_ENDPOINT) |
| i += descriptors[i]; |
| |
| if (i >= length) |
| break; |
| |
| while (i < length) { |
| if (descriptors[i + 1] != USB_DT_ENDPOINT) |
| break; |
| |
| devep = descriptors[i + 2]; |
| switch (descriptors[i + 3] & 0x3) { |
| case 0x00: |
| type = USBDEVFS_URB_TYPE_CONTROL; |
| break; |
| case 0x01: |
| type = USBDEVFS_URB_TYPE_ISO; |
| break; |
| case 0x02: |
| type = USBDEVFS_URB_TYPE_BULK; |
| break; |
| case 0x03: |
| type = USBDEVFS_URB_TYPE_INTERRUPT; |
| break; |
| default: |
| printf("usb_host: malformed endpoint type\n"); |
| type = USBDEVFS_URB_TYPE_BULK; |
| } |
| s->endp_table[(devep & 0xf) - 1].type = type; |
| |
| i += descriptors[i]; |
| } |
| } |
| return 0; |
| } |
| |
| /* XXX: exclude high speed devices or implement EHCI */ |
| USBDevice *usb_host_device_open(const char *devname) |
| { |
| int fd = -1, ret; |
| USBHostDevice *dev = NULL; |
| struct usbdevfs_connectinfo ci; |
| char buf[1024]; |
| int bus_num, addr; |
| char product_name[PRODUCT_NAME_SZ]; |
| |
| dev = qemu_mallocz(sizeof(USBHostDevice)); |
| if (!dev) |
| goto fail; |
| |
| #ifdef DEBUG_ISOCH |
| printf("usb_host_device_open %s\n", devname); |
| #endif |
| if (usb_host_find_device(&bus_num, &addr, |
| product_name, sizeof(product_name), |
| devname) < 0) |
| return NULL; |
| |
| snprintf(buf, sizeof(buf), USBDEVFS_PATH "/%03d/%03d", |
| bus_num, addr); |
| fd = open(buf, O_RDWR | O_NONBLOCK); |
| if (fd < 0) { |
| perror(buf); |
| return NULL; |
| } |
| |
| /* read the device description */ |
| dev->descr_len = read(fd, dev->descr, sizeof(dev->descr)); |
| if (dev->descr_len <= 0) { |
| perror("usb_host_device_open: reading device data failed"); |
| goto fail; |
| } |
| |
| #ifdef DEBUG |
| { |
| int x; |
| printf("=== begin dumping device descriptor data ===\n"); |
| for (x = 0; x < dev->descr_len; x++) |
| printf("%02x ", dev->descr[x]); |
| printf("\n=== end dumping device descriptor data ===\n"); |
| } |
| #endif |
| |
| dev->fd = fd; |
| dev->configuration = 1; |
| |
| /* XXX - do something about initial configuration */ |
| if (!usb_host_update_interfaces(dev, 1)) |
| goto fail; |
| |
| ret = ioctl(fd, USBDEVFS_CONNECTINFO, &ci); |
| if (ret < 0) { |
| perror("usb_host_device_open: USBDEVFS_CONNECTINFO"); |
| goto fail; |
| } |
| |
| #ifdef DEBUG |
| printf("host USB device %d.%d grabbed\n", bus_num, addr); |
| #endif |
| |
| ret = usb_linux_update_endp_table(dev); |
| if (ret) |
| goto fail; |
| |
| if (ci.slow) |
| dev->dev.speed = USB_SPEED_LOW; |
| else |
| dev->dev.speed = USB_SPEED_HIGH; |
| dev->dev.handle_packet = usb_generic_handle_packet; |
| |
| dev->dev.handle_reset = usb_host_handle_reset; |
| dev->dev.handle_control = usb_host_handle_control; |
| dev->dev.handle_data = usb_host_handle_data; |
| dev->dev.handle_destroy = usb_host_handle_destroy; |
| |
| if (product_name[0] == '\0') |
| snprintf(dev->dev.devname, sizeof(dev->dev.devname), |
| "host:%s", devname); |
| else |
| pstrcpy(dev->dev.devname, sizeof(dev->dev.devname), |
| product_name); |
| |
| #ifdef USE_ASYNCIO |
| /* set up the signal handlers */ |
| sigemptyset(&sigact.sa_mask); |
| sigact.sa_sigaction = isoch_done; |
| sigact.sa_flags = SA_SIGINFO; |
| sigact.sa_restorer = 0; |
| ret = sigaction(SIG_ISOCOMPLETE, &sigact, NULL); |
| if (ret < 0) { |
| perror("usb_host_device_open: sigaction failed"); |
| goto fail; |
| } |
| |
| if (pipe(dev->pipe_fds) < 0) { |
| perror("usb_host_device_open: pipe creation failed"); |
| goto fail; |
| } |
| fcntl(dev->pipe_fds[0], F_SETFL, O_NONBLOCK | O_ASYNC); |
| fcntl(dev->pipe_fds[1], F_SETFL, O_NONBLOCK); |
| qemu_set_fd_handler(dev->pipe_fds[0], urb_completion_pipe_read, NULL, dev); |
| #endif |
| dev->urbs_ready = 0; |
| return (USBDevice *)dev; |
| fail: |
| if (dev) |
| qemu_free(dev); |
| close(fd); |
| return NULL; |
| } |
| |
| static int get_tag_value(char *buf, int buf_size, |
| const char *str, const char *tag, |
| const char *stopchars) |
| { |
| const char *p; |
| char *q; |
| p = strstr(str, tag); |
| if (!p) |
| return -1; |
| p += strlen(tag); |
| while (isspace(*p)) |
| p++; |
| q = buf; |
| while (*p != '\0' && !strchr(stopchars, *p)) { |
| if ((q - buf) < (buf_size - 1)) |
| *q++ = *p; |
| p++; |
| } |
| *q = '\0'; |
| return q - buf; |
| } |
| |
| static int usb_host_scan(void *opaque, USBScanFunc *func) |
| { |
| FILE *f; |
| char line[1024]; |
| char buf[1024]; |
| int bus_num, addr, speed, device_count, class_id, product_id, vendor_id; |
| int ret; |
| char product_name[512]; |
| |
| f = fopen(USBDEVFS_PATH "/devices", "r"); |
| if (!f) { |
| term_printf("Could not open %s\n", USBDEVFS_PATH "/devices"); |
| return 0; |
| } |
| device_count = 0; |
| bus_num = addr = speed = class_id = product_id = vendor_id = 0; |
| ret = 0; |
| for(;;) { |
| if (fgets(line, sizeof(line), f) == NULL) |
| break; |
| if (strlen(line) > 0) |
| line[strlen(line) - 1] = '\0'; |
| if (line[0] == 'T' && line[1] == ':') { |
| if (device_count && (vendor_id || product_id)) { |
| /* New device. Add the previously discovered device. */ |
| ret = func(opaque, bus_num, addr, class_id, vendor_id, |
| product_id, product_name, speed); |
| if (ret) |
| goto the_end; |
| } |
| if (get_tag_value(buf, sizeof(buf), line, "Bus=", " ") < 0) |
| goto fail; |
| bus_num = atoi(buf); |
| if (get_tag_value(buf, sizeof(buf), line, "Dev#=", " ") < 0) |
| goto fail; |
| addr = atoi(buf); |
| if (get_tag_value(buf, sizeof(buf), line, "Spd=", " ") < 0) |
| goto fail; |
| if (!strcmp(buf, "480")) |
| speed = USB_SPEED_HIGH; |
| else if (!strcmp(buf, "1.5")) |
| speed = USB_SPEED_LOW; |
| else |
| speed = USB_SPEED_FULL; |
| product_name[0] = '\0'; |
| class_id = 0xff; |
| device_count++; |
| product_id = 0; |
| vendor_id = 0; |
| } else if (line[0] == 'P' && line[1] == ':') { |
| if (get_tag_value(buf, sizeof(buf), line, "Vendor=", " ") < 0) |
| goto fail; |
| vendor_id = strtoul(buf, NULL, 16); |
| if (get_tag_value(buf, sizeof(buf), line, "ProdID=", " ") < 0) |
| goto fail; |
| product_id = strtoul(buf, NULL, 16); |
| } else if (line[0] == 'S' && line[1] == ':') { |
| if (get_tag_value(buf, sizeof(buf), line, "Product=", "") < 0) |
| goto fail; |
| pstrcpy(product_name, sizeof(product_name), buf); |
| } else if (line[0] == 'D' && line[1] == ':') { |
| if (get_tag_value(buf, sizeof(buf), line, "Cls=", " (") < 0) |
| goto fail; |
| class_id = strtoul(buf, NULL, 16); |
| } |
| fail: ; |
| } |
| if (device_count && (vendor_id || product_id)) { |
| /* Add the last device. */ |
| ret = func(opaque, bus_num, addr, class_id, vendor_id, |
| product_id, product_name, speed); |
| } |
| the_end: |
| fclose(f); |
| return ret; |
| } |
| |
| typedef struct FindDeviceState { |
| int vendor_id; |
| int product_id; |
| int bus_num; |
| int addr; |
| char product_name[PRODUCT_NAME_SZ]; |
| } FindDeviceState; |
| |
| static int usb_host_find_device_scan(void *opaque, int bus_num, int addr, |
| int class_id, |
| int vendor_id, int product_id, |
| const char *product_name, int speed) |
| { |
| FindDeviceState *s = opaque; |
| if ((vendor_id == s->vendor_id && |
| product_id == s->product_id) || |
| (bus_num == s->bus_num && |
| addr == s->addr)) { |
| pstrcpy(s->product_name, PRODUCT_NAME_SZ, product_name); |
| s->bus_num = bus_num; |
| s->addr = addr; |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| /* the syntax is : |
| 'bus.addr' (decimal numbers) or |
| 'vendor_id:product_id' (hexa numbers) */ |
| static int usb_host_find_device(int *pbus_num, int *paddr, |
| char *product_name, int product_name_size, |
| const char *devname) |
| { |
| const char *p; |
| int ret; |
| FindDeviceState fs; |
| |
| p = strchr(devname, '.'); |
| if (p) { |
| *pbus_num = strtoul(devname, NULL, 0); |
| *paddr = strtoul(p + 1, NULL, 0); |
| fs.bus_num = *pbus_num; |
| fs.addr = *paddr; |
| ret = usb_host_scan(&fs, usb_host_find_device_scan); |
| if (ret) |
| pstrcpy(product_name, product_name_size, fs.product_name); |
| return 0; |
| } |
| p = strchr(devname, ':'); |
| if (p) { |
| fs.vendor_id = strtoul(devname, NULL, 16); |
| fs.product_id = strtoul(p + 1, NULL, 16); |
| ret = usb_host_scan(&fs, usb_host_find_device_scan); |
| if (ret) { |
| *pbus_num = fs.bus_num; |
| *paddr = fs.addr; |
| pstrcpy(product_name, product_name_size, fs.product_name); |
| return 0; |
| } |
| } |
| return -1; |
| } |
| |
| /**********************/ |
| /* USB host device info */ |
| |
| struct usb_class_info { |
| int class; |
| const char *class_name; |
| }; |
| |
| static const struct usb_class_info usb_class_info[] = { |
| { USB_CLASS_AUDIO, "Audio"}, |
| { USB_CLASS_COMM, "Communication"}, |
| { USB_CLASS_HID, "HID"}, |
| { USB_CLASS_HUB, "Hub" }, |
| { USB_CLASS_PHYSICAL, "Physical" }, |
| { USB_CLASS_PRINTER, "Printer" }, |
| { USB_CLASS_MASS_STORAGE, "Storage" }, |
| { USB_CLASS_CDC_DATA, "Data" }, |
| { USB_CLASS_APP_SPEC, "Application Specific" }, |
| { USB_CLASS_VENDOR_SPEC, "Vendor Specific" }, |
| { USB_CLASS_STILL_IMAGE, "Still Image" }, |
| { USB_CLASS_CSCID, "Smart Card" }, |
| { USB_CLASS_CONTENT_SEC, "Content Security" }, |
| { -1, NULL } |
| }; |
| |
| static const char *usb_class_str(uint8_t class) |
| { |
| const struct usb_class_info *p; |
| for(p = usb_class_info; p->class != -1; p++) { |
| if (p->class == class) |
| break; |
| } |
| return p->class_name; |
| } |
| |
| static void usb_info_device(int bus_num, int addr, int class_id, |
| int vendor_id, int product_id, |
| const char *product_name, |
| int speed) |
| { |
| const char *class_str, *speed_str; |
| |
| switch(speed) { |
| case USB_SPEED_LOW: |
| speed_str = "1.5"; |
| break; |
| case USB_SPEED_FULL: |
| speed_str = "12"; |
| break; |
| case USB_SPEED_HIGH: |
| speed_str = "480"; |
| break; |
| default: |
| speed_str = "?"; |
| break; |
| } |
| |
| term_printf(" Device %d.%d, speed %s Mb/s\n", |
| bus_num, addr, speed_str); |
| class_str = usb_class_str(class_id); |
| if (class_str) |
| term_printf(" %s:", class_str); |
| else |
| term_printf(" Class %02x:", class_id); |
| term_printf(" USB device %04x:%04x", vendor_id, product_id); |
| if (product_name[0] != '\0') |
| term_printf(", %s", product_name); |
| term_printf("\n"); |
| } |
| |
| static int usb_host_info_device(void *opaque, int bus_num, int addr, |
| int class_id, |
| int vendor_id, int product_id, |
| const char *product_name, |
| int speed) |
| { |
| usb_info_device(bus_num, addr, class_id, vendor_id, product_id, |
| product_name, speed); |
| return 0; |
| } |
| |
| void usb_host_info(void) |
| { |
| usb_host_scan(NULL, usb_host_info_device); |
| } |
| |
| #else |
| |
| void usb_host_info(void) |
| { |
| term_printf("USB host devices not supported\n"); |
| } |
| |
| /* XXX: modify configure to compile the right host driver */ |
| USBDevice *usb_host_device_open(const char *devname) |
| { |
| return NULL; |
| } |
| |
| #endif |