| /* |
| * Generic SCSI Device support |
| * |
| * Copyright (c) 2007 Bull S.A.S. |
| * Based on code by Paul Brook |
| * Based on code by Fabrice Bellard |
| * |
| * Written by Laurent Vivier <Laurent.Vivier@bull.net> |
| * |
| * This code is licensed under the LGPL. |
| * |
| */ |
| |
| #include "qemu-common.h" |
| #include "qemu-error.h" |
| #include "scsi.h" |
| #include "blockdev.h" |
| |
| #ifdef __linux__ |
| |
| //#define DEBUG_SCSI |
| |
| #ifdef DEBUG_SCSI |
| #define DPRINTF(fmt, ...) \ |
| do { printf("scsi-generic: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(fmt, ...) do {} while(0) |
| #endif |
| |
| #define BADF(fmt, ...) \ |
| do { fprintf(stderr, "scsi-generic: " fmt , ## __VA_ARGS__); } while (0) |
| |
| #include <stdio.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <unistd.h> |
| #include <scsi/sg.h> |
| #include "scsi-defs.h" |
| |
| #define SCSI_SENSE_BUF_SIZE 96 |
| |
| #define SG_ERR_DRIVER_TIMEOUT 0x06 |
| #define SG_ERR_DRIVER_SENSE 0x08 |
| |
| #ifndef MAX_UINT |
| #define MAX_UINT ((unsigned int)-1) |
| #endif |
| |
| typedef struct SCSIGenericState SCSIGenericState; |
| |
| typedef struct SCSIGenericReq { |
| SCSIRequest req; |
| uint8_t *buf; |
| int buflen; |
| int len; |
| sg_io_hdr_t io_header; |
| } SCSIGenericReq; |
| |
| struct SCSIGenericState |
| { |
| SCSIDevice qdev; |
| BlockDriverState *bs; |
| }; |
| |
| static void scsi_free_request(SCSIRequest *req) |
| { |
| SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req); |
| |
| g_free(r->buf); |
| } |
| |
| /* Helper function for command completion. */ |
| static void scsi_command_complete(void *opaque, int ret) |
| { |
| int status; |
| SCSIGenericReq *r = (SCSIGenericReq *)opaque; |
| |
| r->req.aiocb = NULL; |
| if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE) |
| r->req.sense_len = r->io_header.sb_len_wr; |
| |
| if (ret != 0) { |
| switch (ret) { |
| case -EDOM: |
| status = TASK_SET_FULL; |
| break; |
| case -ENOMEM: |
| status = CHECK_CONDITION; |
| scsi_req_build_sense(&r->req, SENSE_CODE(TARGET_FAILURE)); |
| break; |
| default: |
| status = CHECK_CONDITION; |
| scsi_req_build_sense(&r->req, SENSE_CODE(IO_ERROR)); |
| break; |
| } |
| } else { |
| if (r->io_header.driver_status & SG_ERR_DRIVER_TIMEOUT) { |
| status = BUSY; |
| BADF("Driver Timeout\n"); |
| } else if (r->io_header.status) { |
| status = r->io_header.status; |
| } else if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE) { |
| status = CHECK_CONDITION; |
| } else { |
| status = GOOD; |
| } |
| } |
| DPRINTF("Command complete 0x%p tag=0x%x status=%d\n", |
| r, r->req.tag, status); |
| |
| scsi_req_complete(&r->req, status); |
| } |
| |
| /* Cancel a pending data transfer. */ |
| static void scsi_cancel_io(SCSIRequest *req) |
| { |
| SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req); |
| |
| DPRINTF("Cancel tag=0x%x\n", req->tag); |
| if (r->req.aiocb) { |
| bdrv_aio_cancel(r->req.aiocb); |
| } |
| r->req.aiocb = NULL; |
| } |
| |
| static int execute_command(BlockDriverState *bdrv, |
| SCSIGenericReq *r, int direction, |
| BlockDriverCompletionFunc *complete) |
| { |
| r->io_header.interface_id = 'S'; |
| r->io_header.dxfer_direction = direction; |
| r->io_header.dxferp = r->buf; |
| r->io_header.dxfer_len = r->buflen; |
| r->io_header.cmdp = r->req.cmd.buf; |
| r->io_header.cmd_len = r->req.cmd.len; |
| r->io_header.mx_sb_len = sizeof(r->req.sense); |
| r->io_header.sbp = r->req.sense; |
| r->io_header.timeout = MAX_UINT; |
| r->io_header.usr_ptr = r; |
| r->io_header.flags |= SG_FLAG_DIRECT_IO; |
| |
| r->req.aiocb = bdrv_aio_ioctl(bdrv, SG_IO, &r->io_header, complete, r); |
| if (r->req.aiocb == NULL) { |
| BADF("execute_command: read failed !\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static void scsi_read_complete(void * opaque, int ret) |
| { |
| SCSIGenericReq *r = (SCSIGenericReq *)opaque; |
| int len; |
| |
| r->req.aiocb = NULL; |
| if (ret) { |
| DPRINTF("IO error ret %d\n", ret); |
| scsi_command_complete(r, ret); |
| return; |
| } |
| len = r->io_header.dxfer_len - r->io_header.resid; |
| DPRINTF("Data ready tag=0x%x len=%d\n", r->req.tag, len); |
| |
| r->len = -1; |
| if (len == 0) { |
| scsi_command_complete(r, 0); |
| } else { |
| scsi_req_data(&r->req, len); |
| } |
| } |
| |
| /* Read more data from scsi device into buffer. */ |
| static void scsi_read_data(SCSIRequest *req) |
| { |
| SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req); |
| SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, r->req.dev); |
| int ret; |
| |
| DPRINTF("scsi_read_data 0x%x\n", req->tag); |
| if (r->len == -1) { |
| scsi_command_complete(r, 0); |
| return; |
| } |
| |
| ret = execute_command(s->bs, r, SG_DXFER_FROM_DEV, scsi_read_complete); |
| if (ret < 0) { |
| scsi_command_complete(r, ret); |
| return; |
| } |
| } |
| |
| static void scsi_write_complete(void * opaque, int ret) |
| { |
| SCSIGenericReq *r = (SCSIGenericReq *)opaque; |
| SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, r->req.dev); |
| |
| DPRINTF("scsi_write_complete() ret = %d\n", ret); |
| r->req.aiocb = NULL; |
| if (ret) { |
| DPRINTF("IO error\n"); |
| scsi_command_complete(r, ret); |
| return; |
| } |
| |
| if (r->req.cmd.buf[0] == MODE_SELECT && r->req.cmd.buf[4] == 12 && |
| s->qdev.type == TYPE_TAPE) { |
| s->qdev.blocksize = (r->buf[9] << 16) | (r->buf[10] << 8) | r->buf[11]; |
| DPRINTF("block size %d\n", s->qdev.blocksize); |
| } |
| |
| scsi_command_complete(r, ret); |
| } |
| |
| /* Write data to a scsi device. Returns nonzero on failure. |
| The transfer may complete asynchronously. */ |
| static void scsi_write_data(SCSIRequest *req) |
| { |
| SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, req->dev); |
| SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req); |
| int ret; |
| |
| DPRINTF("scsi_write_data 0x%x\n", req->tag); |
| if (r->len == 0) { |
| r->len = r->buflen; |
| scsi_req_data(&r->req, r->len); |
| return; |
| } |
| |
| ret = execute_command(s->bs, r, SG_DXFER_TO_DEV, scsi_write_complete); |
| if (ret < 0) { |
| scsi_command_complete(r, ret); |
| } |
| } |
| |
| /* Return a pointer to the data buffer. */ |
| static uint8_t *scsi_get_buf(SCSIRequest *req) |
| { |
| SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req); |
| |
| return r->buf; |
| } |
| |
| static void scsi_req_fixup(SCSIRequest *req) |
| { |
| switch(req->cmd.buf[0]) { |
| case WRITE_10: |
| req->cmd.buf[1] &= ~0x08; /* disable FUA */ |
| break; |
| case READ_10: |
| req->cmd.buf[1] &= ~0x08; /* disable FUA */ |
| break; |
| case REWIND: |
| case START_STOP: |
| if (req->dev->type == TYPE_TAPE) { |
| /* force IMMED, otherwise qemu waits end of command */ |
| req->cmd.buf[1] = 0x01; |
| } |
| break; |
| } |
| } |
| |
| /* Execute a scsi command. Returns the length of the data expected by the |
| command. This will be Positive for data transfers from the device |
| (eg. disk reads), negative for transfers to the device (eg. disk writes), |
| and zero if the command does not transfer any data. */ |
| |
| static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd) |
| { |
| SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, req->dev); |
| SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req); |
| int ret; |
| |
| scsi_req_fixup(&r->req); |
| |
| DPRINTF("Command: lun=%d tag=0x%x len %zd data=0x%02x", lun, tag, |
| r->req.cmd.xfer, cmd[0]); |
| |
| #ifdef DEBUG_SCSI |
| { |
| int i; |
| for (i = 1; i < r->req.cmd.len; i++) { |
| printf(" 0x%02x", cmd[i]); |
| } |
| printf("\n"); |
| } |
| #endif |
| |
| if (r->req.cmd.xfer == 0) { |
| if (r->buf != NULL) |
| g_free(r->buf); |
| r->buflen = 0; |
| r->buf = NULL; |
| ret = execute_command(s->bs, r, SG_DXFER_NONE, scsi_command_complete); |
| if (ret < 0) { |
| scsi_command_complete(r, ret); |
| return 0; |
| } |
| return 0; |
| } |
| |
| if (r->buflen != r->req.cmd.xfer) { |
| if (r->buf != NULL) |
| g_free(r->buf); |
| r->buf = g_malloc(r->req.cmd.xfer); |
| r->buflen = r->req.cmd.xfer; |
| } |
| |
| memset(r->buf, 0, r->buflen); |
| r->len = r->req.cmd.xfer; |
| if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { |
| r->len = 0; |
| return -r->req.cmd.xfer; |
| } else { |
| return r->req.cmd.xfer; |
| } |
| } |
| |
| static int get_blocksize(BlockDriverState *bdrv) |
| { |
| uint8_t cmd[10]; |
| uint8_t buf[8]; |
| uint8_t sensebuf[8]; |
| sg_io_hdr_t io_header; |
| int ret; |
| |
| memset(cmd, 0, sizeof(cmd)); |
| memset(buf, 0, sizeof(buf)); |
| cmd[0] = READ_CAPACITY_10; |
| |
| memset(&io_header, 0, sizeof(io_header)); |
| io_header.interface_id = 'S'; |
| io_header.dxfer_direction = SG_DXFER_FROM_DEV; |
| io_header.dxfer_len = sizeof(buf); |
| io_header.dxferp = buf; |
| io_header.cmdp = cmd; |
| io_header.cmd_len = sizeof(cmd); |
| io_header.mx_sb_len = sizeof(sensebuf); |
| io_header.sbp = sensebuf; |
| io_header.timeout = 6000; /* XXX */ |
| |
| ret = bdrv_ioctl(bdrv, SG_IO, &io_header); |
| if (ret < 0) |
| return -1; |
| |
| return (buf[4] << 24) | (buf[5] << 16) | (buf[6] << 8) | buf[7]; |
| } |
| |
| static int get_stream_blocksize(BlockDriverState *bdrv) |
| { |
| uint8_t cmd[6]; |
| uint8_t buf[12]; |
| uint8_t sensebuf[8]; |
| sg_io_hdr_t io_header; |
| int ret; |
| |
| memset(cmd, 0, sizeof(cmd)); |
| memset(buf, 0, sizeof(buf)); |
| cmd[0] = MODE_SENSE; |
| cmd[4] = sizeof(buf); |
| |
| memset(&io_header, 0, sizeof(io_header)); |
| io_header.interface_id = 'S'; |
| io_header.dxfer_direction = SG_DXFER_FROM_DEV; |
| io_header.dxfer_len = sizeof(buf); |
| io_header.dxferp = buf; |
| io_header.cmdp = cmd; |
| io_header.cmd_len = sizeof(cmd); |
| io_header.mx_sb_len = sizeof(sensebuf); |
| io_header.sbp = sensebuf; |
| io_header.timeout = 6000; /* XXX */ |
| |
| ret = bdrv_ioctl(bdrv, SG_IO, &io_header); |
| if (ret < 0) |
| return -1; |
| |
| return (buf[9] << 16) | (buf[10] << 8) | buf[11]; |
| } |
| |
| static void scsi_generic_reset(DeviceState *dev) |
| { |
| SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev.qdev, dev); |
| |
| scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET)); |
| } |
| |
| static void scsi_destroy(SCSIDevice *d) |
| { |
| SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, d); |
| |
| scsi_device_purge_requests(&s->qdev, SENSE_CODE(NO_SENSE)); |
| blockdev_mark_auto_del(s->qdev.conf.bs); |
| } |
| |
| static int scsi_generic_initfn(SCSIDevice *dev) |
| { |
| SCSIGenericState *s = DO_UPCAST(SCSIGenericState, qdev, dev); |
| int sg_version; |
| struct sg_scsi_id scsiid; |
| |
| if (!s->qdev.conf.bs) { |
| error_report("scsi-generic: drive property not set"); |
| return -1; |
| } |
| s->bs = s->qdev.conf.bs; |
| |
| /* check we are really using a /dev/sg* file */ |
| if (!bdrv_is_sg(s->bs)) { |
| error_report("scsi-generic: not /dev/sg*"); |
| return -1; |
| } |
| |
| if (bdrv_get_on_error(s->bs, 0) != BLOCK_ERR_STOP_ENOSPC) { |
| error_report("Device doesn't support drive option werror"); |
| return -1; |
| } |
| if (bdrv_get_on_error(s->bs, 1) != BLOCK_ERR_REPORT) { |
| error_report("Device doesn't support drive option rerror"); |
| return -1; |
| } |
| |
| /* check we are using a driver managing SG_IO (version 3 and after */ |
| if (bdrv_ioctl(s->bs, SG_GET_VERSION_NUM, &sg_version) < 0 || |
| sg_version < 30000) { |
| error_report("scsi-generic: scsi generic interface too old"); |
| return -1; |
| } |
| |
| /* get LUN of the /dev/sg? */ |
| if (bdrv_ioctl(s->bs, SG_GET_SCSI_ID, &scsiid)) { |
| error_report("scsi-generic: SG_GET_SCSI_ID ioctl failed"); |
| return -1; |
| } |
| |
| /* define device state */ |
| s->qdev.type = scsiid.scsi_type; |
| DPRINTF("device type %d\n", s->qdev.type); |
| if (s->qdev.type == TYPE_TAPE) { |
| s->qdev.blocksize = get_stream_blocksize(s->bs); |
| if (s->qdev.blocksize == -1) |
| s->qdev.blocksize = 0; |
| } else { |
| s->qdev.blocksize = get_blocksize(s->bs); |
| /* removable media returns 0 if not present */ |
| if (s->qdev.blocksize <= 0) { |
| if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) |
| s->qdev.blocksize = 2048; |
| else |
| s->qdev.blocksize = 512; |
| } |
| } |
| DPRINTF("block size %d\n", s->qdev.blocksize); |
| bdrv_set_removable(s->bs, 0); |
| return 0; |
| } |
| |
| static SCSIReqOps scsi_generic_req_ops = { |
| .size = sizeof(SCSIGenericReq), |
| .free_req = scsi_free_request, |
| .send_command = scsi_send_command, |
| .read_data = scsi_read_data, |
| .write_data = scsi_write_data, |
| .cancel_io = scsi_cancel_io, |
| .get_buf = scsi_get_buf, |
| }; |
| |
| static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun, |
| void *hba_private) |
| { |
| SCSIRequest *req; |
| |
| req = scsi_req_alloc(&scsi_generic_req_ops, d, tag, lun, hba_private); |
| return req; |
| } |
| |
| static SCSIDeviceInfo scsi_generic_info = { |
| .qdev.name = "scsi-generic", |
| .qdev.desc = "pass through generic scsi device (/dev/sg*)", |
| .qdev.size = sizeof(SCSIGenericState), |
| .qdev.reset = scsi_generic_reset, |
| .init = scsi_generic_initfn, |
| .destroy = scsi_destroy, |
| .alloc_req = scsi_new_request, |
| .qdev.props = (Property[]) { |
| DEFINE_BLOCK_PROPERTIES(SCSIGenericState, qdev.conf), |
| DEFINE_PROP_END_OF_LIST(), |
| }, |
| }; |
| |
| static void scsi_generic_register_devices(void) |
| { |
| scsi_qdev_register(&scsi_generic_info); |
| } |
| device_init(scsi_generic_register_devices) |
| |
| #endif /* __linux__ */ |