docs/system/arm/xlnx-versal-virt.rst - qemu - Git at Google

 Xilinx Versal Virt (``xlnx-versal-virt``)
 =========================================

 Xilinx Versal is a family of heterogeneous multi-core SoCs
 (System on Chip) that combine traditional hardened CPUs and I/O
 peripherals in a Processing System (PS) with runtime programmable
 FPGA logic (PL) and an Artificial Intelligence Engine (AIE).

 More details here:
 https://www.xilinx.com/products/silicon-devices/acap/versal.html

 The family of Versal SoCs share a single architecture but come in
 different parts with different speed grades, amounts of PL and
 other differences.

 The Xilinx Versal Virt board in QEMU is a model of a virtual board
 (does not exist in reality) with a virtual Versal SoC without I/O
 limitations. Currently, we support the following cores and devices:

 Implemented CPU cores:

 - 2 ACPUs (ARM Cortex-A72)

 Implemented devices:

 - Interrupt controller (ARM GICv3)
 - 2 UARTs (ARM PL011)
 - An RTC (Versal built-in)
 - 2 GEMs (Cadence MACB Ethernet MACs)
 - 8 ADMA (Xilinx zDMA) channels
 - 2 SD Controllers
 - OCM (256KB of On Chip Memory)
 - XRAM (4MB of on chip Accelerator RAM)
 - DDR memory
 - BBRAM (36 bytes of Battery-backed RAM)
 - eFUSE (3072 bytes of one-time field-programmable bit array)
 - 2 CANFDs

 QEMU does not yet model any other devices, including the PL and the AI Engine.

 Other differences between the hardware and the QEMU model:

 - QEMU allows the amount of DDR memory provided to be specified with the
   ``-m`` argument. If a DTB is provided on the command line then QEMU will
   edit it to include suitable entries describing the Versal DDR memory ranges.

 - QEMU provides 8 virtio-mmio virtio transports; these start at
   address ``0xa0000000`` and have IRQs from 111 and upwards.

 Running
 """""""
 If the user provides an Operating System to be loaded, we expect users
 to use the ``-kernel`` command line option.

 Users can load firmware or boot-loaders with the ``-device loader`` options.

 When loading an OS, QEMU generates a DTB and selects an appropriate address
 where it gets loaded. This DTB will be passed to the kernel in register x0.

 If there's no ``-kernel`` option, we generate a DTB and place it at 0x1000
 for boot-loaders or firmware to pick it up.

 If users want to provide their own DTB, they can use the ``-dtb`` option.
 These DTBs will have their memory nodes modified to match QEMU's
 selected ram_size option before they get passed to the kernel or FW.

 When loading an OS, we turn on QEMU's PSCI implementation with SMC
 as the PSCI conduit. When there's no ``-kernel`` option, we assume the user
 provides EL3 firmware to handle PSCI.

 A few examples:

 Direct Linux boot of a generic ARM64 upstream Linux kernel:

 .. code-block:: bash

   $ qemu-system-aarch64 -M xlnx-versal-virt -m 2G \
       -serial mon:stdio -display none \
       -kernel arch/arm64/boot/Image \
       -nic user -nic user \
       -device virtio-rng-device,bus=virtio-mmio-bus.0 \
       -drive if=none,index=0,file=hd0.qcow2,id=hd0,snapshot \
       -drive file=qemu_sd.qcow2,if=sd,index=0,snapshot \
       -device virtio-blk-device,drive=hd0 -append root=/dev/vda

 Direct Linux boot of PetaLinux 2019.2:

 .. code-block:: bash

   $ qemu-system-aarch64  -M xlnx-versal-virt -m 2G \
       -serial mon:stdio -display none \
       -kernel petalinux-v2019.2/Image \
       -append "rdinit=/sbin/init console=ttyAMA0,115200n8 earlycon=pl011,mmio,0xFF000000,115200n8" \
       -net nic,model=cadence_gem,netdev=net0 -netdev user,id=net0 \
       -device virtio-rng-device,bus=virtio-mmio-bus.0,rng=rng0 \
       -object rng-random,filename=/dev/urandom,id=rng0

 Boot PetaLinux 2019.2 via ARM Trusted Firmware (2018.3 because the 2019.2
 version of ATF tries to configure the CCI which we don't model) and U-boot:

 .. code-block:: bash

   $ qemu-system-aarch64 -M xlnx-versal-virt -m 2G \
       -serial stdio -display none \
       -device loader,file=petalinux-v2018.3/bl31.elf,cpu-num=0 \
       -device loader,file=petalinux-v2019.2/u-boot.elf \
       -device loader,addr=0x20000000,file=petalinux-v2019.2/Image \
       -nic user -nic user \
       -device virtio-rng-device,bus=virtio-mmio-bus.0,rng=rng0 \
       -object rng-random,filename=/dev/urandom,id=rng0

 Run the following at the U-Boot prompt:

 .. code-block:: bash

   Versal>
   fdt addr $fdtcontroladdr
   fdt move $fdtcontroladdr 0x40000000
   fdt set /timer clock-frequency <0x3dfd240>
   setenv bootargs "rdinit=/sbin/init maxcpus=1 console=ttyAMA0,115200n8 earlycon=pl011,mmio,0xFF000000,115200n8"
   booti 20000000 - 40000000
   fdt addr $fdtcontroladdr

 Boot Linux as DOM0 on Xen via U-Boot:

 .. code-block:: bash

   $ qemu-system-aarch64 -M xlnx-versal-virt -m 4G \
       -serial stdio -display none \
       -device loader,file=petalinux-v2019.2/u-boot.elf,cpu-num=0 \
       -device loader,addr=0x30000000,file=linux/2018-04-24/xen \
       -device loader,addr=0x40000000,file=petalinux-v2019.2/Image \
       -nic user -nic user \
       -device virtio-rng-device,bus=virtio-mmio-bus.0,rng=rng0 \
       -object rng-random,filename=/dev/urandom,id=rng0

 Run the following at the U-Boot prompt:

 .. code-block:: bash

   Versal>
   fdt addr $fdtcontroladdr
   fdt move $fdtcontroladdr 0x20000000
   fdt set /timer clock-frequency <0x3dfd240>
   fdt set /chosen xen,xen-bootargs "console=dtuart dtuart=/uart@ff000000 dom0_mem=640M bootscrub=0 maxcpus=1 timer_slop=0"
   fdt set /chosen xen,dom0-bootargs "rdinit=/sbin/init clk_ignore_unused console=hvc0 maxcpus=1"
   fdt mknode /chosen dom0
   fdt set /chosen/dom0 compatible "xen,multiboot-module"
   fdt set /chosen/dom0 reg <0x00000000 0x40000000 0x0 0x03100000>
   booti 30000000 - 20000000

 Boot Linux as Dom0 on Xen via ARM Trusted Firmware and U-Boot:

 .. code-block:: bash

   $ qemu-system-aarch64 -M xlnx-versal-virt -m 4G \
       -serial stdio -display none \
       -device loader,file=petalinux-v2018.3/bl31.elf,cpu-num=0 \
       -device loader,file=petalinux-v2019.2/u-boot.elf \
       -device loader,addr=0x30000000,file=linux/2018-04-24/xen \
       -device loader,addr=0x40000000,file=petalinux-v2019.2/Image \
       -nic user -nic user \
       -device virtio-rng-device,bus=virtio-mmio-bus.0,rng=rng0 \
       -object rng-random,filename=/dev/urandom,id=rng0

 Run the following at the U-Boot prompt:

 .. code-block:: bash

   Versal>
   fdt addr $fdtcontroladdr
   fdt move $fdtcontroladdr 0x20000000
   fdt set /timer clock-frequency <0x3dfd240>
   fdt set /chosen xen,xen-bootargs "console=dtuart dtuart=/uart@ff000000 dom0_mem=640M bootscrub=0 maxcpus=1 timer_slop=0"
   fdt set /chosen xen,dom0-bootargs "rdinit=/sbin/init clk_ignore_unused console=hvc0 maxcpus=1"
   fdt mknode /chosen dom0
   fdt set /chosen/dom0 compatible "xen,multiboot-module"
   fdt set /chosen/dom0 reg <0x00000000 0x40000000 0x0 0x03100000>
   booti 30000000 - 20000000

 BBRAM File Backend
 """"""""""""""""""
 BBRAM can have an optional file backend, which must be a seekable
 binary file with a size of 36 bytes or larger. A file with all
 binary 0s is a 'blank'.

 To add a file-backend for the BBRAM:

 .. code-block:: bash

   -drive if=pflash,index=0,file=versal-bbram.bin,format=raw

 To use a different index value, N, from default of 0, add:

 .. code-block:: bash

   -global driver=xlnx.bbram-ctrl,property=drive-index,value=N

 eFUSE File Backend
 """"""""""""""""""
 eFUSE can have an optional file backend, which must be a seekable
 binary file with a size of 3072 bytes or larger. A file with all
 binary 0s is a 'blank'.

 To add a file-backend for the eFUSE:

 .. code-block:: bash

   -drive if=pflash,index=1,file=versal-efuse.bin,format=raw

 To use a different index value, N, from default of 1, add:

 .. code-block:: bash

   -global xlnx-efuse.drive-index=N

 .. warning::
   In actual physical Versal, BBRAM and eFUSE contain sensitive data.
   The QEMU device models do **not** encrypt nor obfuscate any data
   when holding them in models' memory or when writing them to their
   file backends.

   Thus, a file backend should be used with caution, and 'format=luks'
   is highly recommended (albeit with usage complexity).

   Better yet, do not use actual product data when running guest image
   on this Xilinx Versal Virt board.

 Using CANFDs for Versal Virt
 """"""""""""""""""""""""""""
 Versal CANFD controller is developed based on SocketCAN and QEMU CAN bus
 implementation. Bus connection and socketCAN connection for each CAN module
 can be set through command lines.

 To connect both CANFD0 and CANFD1 on the same bus:

 .. code-block:: bash

     -object can-bus,id=canbus -machine canbus0=canbus -machine canbus1=canbus

 To connect CANFD0 and CANFD1 to separate buses:

 .. code-block:: bash

     -object can-bus,id=canbus0 -object can-bus,id=canbus1 \
     -machine canbus0=canbus0 -machine canbus1=canbus1

 The SocketCAN interface can connect to a Physical or a Virtual CAN interfaces on
 the host machine. Please check this document to learn about CAN interface on
 Linux: docs/system/devices/can.rst

 To connect CANFD0 and CANFD1 to host machine's CAN interface can0:

 .. code-block:: bash

     -object can-bus,id=canbus -machine canbus0=canbus -machine canbus1=canbus
     -object can-host-socketcan,id=canhost0,if=can0,canbus=canbus
	Xilinx Versal Virt (``xlnx-versal-virt``)
	=========================================

	Xilinx Versal is a family of heterogeneous multi-core SoCs
	(System on Chip) that combine traditional hardened CPUs and I/O
	peripherals in a Processing System (PS) with runtime programmable
	FPGA logic (PL) and an Artificial Intelligence Engine (AIE).

	More details here:
	https://www.xilinx.com/products/silicon-devices/acap/versal.html

	The family of Versal SoCs share a single architecture but come in
	different parts with different speed grades, amounts of PL and
	other differences.

	The Xilinx Versal Virt board in QEMU is a model of a virtual board
	(does not exist in reality) with a virtual Versal SoC without I/O
	limitations. Currently, we support the following cores and devices:

	Implemented CPU cores:

	- 2 ACPUs (ARM Cortex-A72)

	Implemented devices:

	- Interrupt controller (ARM GICv3)
	- 2 UARTs (ARM PL011)
	- An RTC (Versal built-in)
	- 2 GEMs (Cadence MACB Ethernet MACs)
	- 8 ADMA (Xilinx zDMA) channels
	- 2 SD Controllers
	- OCM (256KB of On Chip Memory)
	- XRAM (4MB of on chip Accelerator RAM)
	- DDR memory
	- BBRAM (36 bytes of Battery-backed RAM)
	- eFUSE (3072 bytes of one-time field-programmable bit array)
	- 2 CANFDs

	QEMU does not yet model any other devices, including the PL and the AI Engine.

	Other differences between the hardware and the QEMU model:

	- QEMU allows the amount of DDR memory provided to be specified with the
	``-m`` argument. If a DTB is provided on the command line then QEMU will
	edit it to include suitable entries describing the Versal DDR memory ranges.

	- QEMU provides 8 virtio-mmio virtio transports; these start at
	address ``0xa0000000`` and have IRQs from 111 and upwards.

	Running
	"""""""
	If the user provides an Operating System to be loaded, we expect users
	to use the ``-kernel`` command line option.

	Users can load firmware or boot-loaders with the ``-device loader`` options.

	When loading an OS, QEMU generates a DTB and selects an appropriate address
	where it gets loaded. This DTB will be passed to the kernel in register x0.

	If there's no ``-kernel`` option, we generate a DTB and place it at 0x1000
	for boot-loaders or firmware to pick it up.

	If users want to provide their own DTB, they can use the ``-dtb`` option.
	These DTBs will have their memory nodes modified to match QEMU's
	selected ram_size option before they get passed to the kernel or FW.

	When loading an OS, we turn on QEMU's PSCI implementation with SMC
	as the PSCI conduit. When there's no ``-kernel`` option, we assume the user
	provides EL3 firmware to handle PSCI.

	A few examples:

	Direct Linux boot of a generic ARM64 upstream Linux kernel:

	.. code-block:: bash

	$ qemu-system-aarch64 -M xlnx-versal-virt -m 2G \
	-serial mon:stdio -display none \
	-kernel arch/arm64/boot/Image \
	-nic user -nic user \
	-device virtio-rng-device,bus=virtio-mmio-bus.0 \
	-drive if=none,index=0,file=hd0.qcow2,id=hd0,snapshot \
	-drive file=qemu_sd.qcow2,if=sd,index=0,snapshot \
	-device virtio-blk-device,drive=hd0 -append root=/dev/vda

	Direct Linux boot of PetaLinux 2019.2:

	.. code-block:: bash

	$ qemu-system-aarch64 -M xlnx-versal-virt -m 2G \
	-serial mon:stdio -display none \
	-kernel petalinux-v2019.2/Image \
	-append "rdinit=/sbin/init console=ttyAMA0,115200n8 earlycon=pl011,mmio,0xFF000000,115200n8" \
	-net nic,model=cadence_gem,netdev=net0 -netdev user,id=net0 \
	-device virtio-rng-device,bus=virtio-mmio-bus.0,rng=rng0 \
	-object rng-random,filename=/dev/urandom,id=rng0

	Boot PetaLinux 2019.2 via ARM Trusted Firmware (2018.3 because the 2019.2
	version of ATF tries to configure the CCI which we don't model) and U-boot:

	.. code-block:: bash

	$ qemu-system-aarch64 -M xlnx-versal-virt -m 2G \
	-serial stdio -display none \
	-device loader,file=petalinux-v2018.3/bl31.elf,cpu-num=0 \
	-device loader,file=petalinux-v2019.2/u-boot.elf \
	-device loader,addr=0x20000000,file=petalinux-v2019.2/Image \
	-nic user -nic user \
	-device virtio-rng-device,bus=virtio-mmio-bus.0,rng=rng0 \
	-object rng-random,filename=/dev/urandom,id=rng0

	Run the following at the U-Boot prompt:

	.. code-block:: bash

	Versal>
	fdt addr $fdtcontroladdr
	fdt move $fdtcontroladdr 0x40000000
	fdt set /timer clock-frequency <0x3dfd240>
	setenv bootargs "rdinit=/sbin/init maxcpus=1 console=ttyAMA0,115200n8 earlycon=pl011,mmio,0xFF000000,115200n8"
	booti 20000000 - 40000000
	fdt addr $fdtcontroladdr

	Boot Linux as DOM0 on Xen via U-Boot:

	.. code-block:: bash

	$ qemu-system-aarch64 -M xlnx-versal-virt -m 4G \
	-serial stdio -display none \
	-device loader,file=petalinux-v2019.2/u-boot.elf,cpu-num=0 \
	-device loader,addr=0x30000000,file=linux/2018-04-24/xen \
	-device loader,addr=0x40000000,file=petalinux-v2019.2/Image \
	-nic user -nic user \
	-device virtio-rng-device,bus=virtio-mmio-bus.0,rng=rng0 \
	-object rng-random,filename=/dev/urandom,id=rng0

	Run the following at the U-Boot prompt:

	.. code-block:: bash

	Versal>
	fdt addr $fdtcontroladdr
	fdt move $fdtcontroladdr 0x20000000
	fdt set /timer clock-frequency <0x3dfd240>
	fdt set /chosen xen,xen-bootargs "console=dtuart dtuart=/uart@ff000000 dom0_mem=640M bootscrub=0 maxcpus=1 timer_slop=0"
	fdt set /chosen xen,dom0-bootargs "rdinit=/sbin/init clk_ignore_unused console=hvc0 maxcpus=1"
	fdt mknode /chosen dom0
	fdt set /chosen/dom0 compatible "xen,multiboot-module"
	fdt set /chosen/dom0 reg <0x00000000 0x40000000 0x0 0x03100000>
	booti 30000000 - 20000000

	Boot Linux as Dom0 on Xen via ARM Trusted Firmware and U-Boot:

	.. code-block:: bash

	$ qemu-system-aarch64 -M xlnx-versal-virt -m 4G \
	-serial stdio -display none \
	-device loader,file=petalinux-v2018.3/bl31.elf,cpu-num=0 \
	-device loader,file=petalinux-v2019.2/u-boot.elf \
	-device loader,addr=0x30000000,file=linux/2018-04-24/xen \
	-device loader,addr=0x40000000,file=petalinux-v2019.2/Image \
	-nic user -nic user \
	-device virtio-rng-device,bus=virtio-mmio-bus.0,rng=rng0 \
	-object rng-random,filename=/dev/urandom,id=rng0

	Run the following at the U-Boot prompt:

	.. code-block:: bash

	Versal>
	fdt addr $fdtcontroladdr
	fdt move $fdtcontroladdr 0x20000000
	fdt set /timer clock-frequency <0x3dfd240>
	fdt set /chosen xen,xen-bootargs "console=dtuart dtuart=/uart@ff000000 dom0_mem=640M bootscrub=0 maxcpus=1 timer_slop=0"
	fdt set /chosen xen,dom0-bootargs "rdinit=/sbin/init clk_ignore_unused console=hvc0 maxcpus=1"
	fdt mknode /chosen dom0
	fdt set /chosen/dom0 compatible "xen,multiboot-module"
	fdt set /chosen/dom0 reg <0x00000000 0x40000000 0x0 0x03100000>
	booti 30000000 - 20000000

	BBRAM File Backend
	""""""""""""""""""
	BBRAM can have an optional file backend, which must be a seekable
	binary file with a size of 36 bytes or larger. A file with all
	binary 0s is a 'blank'.

	To add a file-backend for the BBRAM:

	.. code-block:: bash

	-drive if=pflash,index=0,file=versal-bbram.bin,format=raw

	To use a different index value, N, from default of 0, add:

	.. code-block:: bash

	-global driver=xlnx.bbram-ctrl,property=drive-index,value=N

	eFUSE File Backend
	""""""""""""""""""
	eFUSE can have an optional file backend, which must be a seekable
	binary file with a size of 3072 bytes or larger. A file with all
	binary 0s is a 'blank'.

	To add a file-backend for the eFUSE:

	.. code-block:: bash

	-drive if=pflash,index=1,file=versal-efuse.bin,format=raw

	To use a different index value, N, from default of 1, add:

	.. code-block:: bash

	-global xlnx-efuse.drive-index=N

	.. warning::
	In actual physical Versal, BBRAM and eFUSE contain sensitive data.
	The QEMU device models do not encrypt nor obfuscate any data
	when holding them in models' memory or when writing them to their
	file backends.

	Thus, a file backend should be used with caution, and 'format=luks'
	is highly recommended (albeit with usage complexity).

	Better yet, do not use actual product data when running guest image
	on this Xilinx Versal Virt board.

	Using CANFDs for Versal Virt
	""""""""""""""""""""""""""""
	Versal CANFD controller is developed based on SocketCAN and QEMU CAN bus
	implementation. Bus connection and socketCAN connection for each CAN module
	can be set through command lines.

	To connect both CANFD0 and CANFD1 on the same bus:

	.. code-block:: bash

	-object can-bus,id=canbus -machine canbus0=canbus -machine canbus1=canbus

	To connect CANFD0 and CANFD1 to separate buses:

	.. code-block:: bash

	-object can-bus,id=canbus0 -object can-bus,id=canbus1 \
	-machine canbus0=canbus0 -machine canbus1=canbus1

	The SocketCAN interface can connect to a Physical or a Virtual CAN interfaces on
	the host machine. Please check this document to learn about CAN interface on
	Linux: docs/system/devices/can.rst

	To connect CANFD0 and CANFD1 to host machine's CAN interface can0:

	.. code-block:: bash

	-object can-bus,id=canbus -machine canbus0=canbus -machine canbus1=canbus
	-object can-host-socketcan,id=canhost0,if=can0,canbus=canbus