| /* |
| * Copyright (C) 2009-2010 Nippon Telegraph and Telephone Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| */ |
| |
| #include "qemu-common.h" |
| #include "qemu-error.h" |
| #include "qemu_socket.h" |
| #include "block_int.h" |
| #include "bitops.h" |
| |
| #define SD_PROTO_VER 0x01 |
| |
| #define SD_DEFAULT_ADDR "localhost" |
| #define SD_DEFAULT_PORT "7000" |
| |
| #define SD_OP_CREATE_AND_WRITE_OBJ 0x01 |
| #define SD_OP_READ_OBJ 0x02 |
| #define SD_OP_WRITE_OBJ 0x03 |
| |
| #define SD_OP_NEW_VDI 0x11 |
| #define SD_OP_LOCK_VDI 0x12 |
| #define SD_OP_RELEASE_VDI 0x13 |
| #define SD_OP_GET_VDI_INFO 0x14 |
| #define SD_OP_READ_VDIS 0x15 |
| #define SD_OP_FLUSH_VDI 0x16 |
| |
| #define SD_FLAG_CMD_WRITE 0x01 |
| #define SD_FLAG_CMD_COW 0x02 |
| #define SD_FLAG_CMD_CACHE 0x04 |
| |
| #define SD_RES_SUCCESS 0x00 /* Success */ |
| #define SD_RES_UNKNOWN 0x01 /* Unknown error */ |
| #define SD_RES_NO_OBJ 0x02 /* No object found */ |
| #define SD_RES_EIO 0x03 /* I/O error */ |
| #define SD_RES_VDI_EXIST 0x04 /* Vdi exists already */ |
| #define SD_RES_INVALID_PARMS 0x05 /* Invalid parameters */ |
| #define SD_RES_SYSTEM_ERROR 0x06 /* System error */ |
| #define SD_RES_VDI_LOCKED 0x07 /* Vdi is locked */ |
| #define SD_RES_NO_VDI 0x08 /* No vdi found */ |
| #define SD_RES_NO_BASE_VDI 0x09 /* No base vdi found */ |
| #define SD_RES_VDI_READ 0x0A /* Cannot read requested vdi */ |
| #define SD_RES_VDI_WRITE 0x0B /* Cannot write requested vdi */ |
| #define SD_RES_BASE_VDI_READ 0x0C /* Cannot read base vdi */ |
| #define SD_RES_BASE_VDI_WRITE 0x0D /* Cannot write base vdi */ |
| #define SD_RES_NO_TAG 0x0E /* Requested tag is not found */ |
| #define SD_RES_STARTUP 0x0F /* Sheepdog is on starting up */ |
| #define SD_RES_VDI_NOT_LOCKED 0x10 /* Vdi is not locked */ |
| #define SD_RES_SHUTDOWN 0x11 /* Sheepdog is shutting down */ |
| #define SD_RES_NO_MEM 0x12 /* Cannot allocate memory */ |
| #define SD_RES_FULL_VDI 0x13 /* we already have the maximum vdis */ |
| #define SD_RES_VER_MISMATCH 0x14 /* Protocol version mismatch */ |
| #define SD_RES_NO_SPACE 0x15 /* Server has no room for new objects */ |
| #define SD_RES_WAIT_FOR_FORMAT 0x16 /* Waiting for a format operation */ |
| #define SD_RES_WAIT_FOR_JOIN 0x17 /* Waiting for other nodes joining */ |
| #define SD_RES_JOIN_FAILED 0x18 /* Target node had failed to join sheepdog */ |
| |
| /* |
| * Object ID rules |
| * |
| * 0 - 19 (20 bits): data object space |
| * 20 - 31 (12 bits): reserved data object space |
| * 32 - 55 (24 bits): vdi object space |
| * 56 - 59 ( 4 bits): reserved vdi object space |
| * 60 - 63 ( 4 bits): object type identifier space |
| */ |
| |
| #define VDI_SPACE_SHIFT 32 |
| #define VDI_BIT (UINT64_C(1) << 63) |
| #define VMSTATE_BIT (UINT64_C(1) << 62) |
| #define MAX_DATA_OBJS (UINT64_C(1) << 20) |
| #define MAX_CHILDREN 1024 |
| #define SD_MAX_VDI_LEN 256 |
| #define SD_MAX_VDI_TAG_LEN 256 |
| #define SD_NR_VDIS (1U << 24) |
| #define SD_DATA_OBJ_SIZE (UINT64_C(1) << 22) |
| #define SD_MAX_VDI_SIZE (SD_DATA_OBJ_SIZE * MAX_DATA_OBJS) |
| #define SECTOR_SIZE 512 |
| |
| #define SD_INODE_SIZE (sizeof(SheepdogInode)) |
| #define CURRENT_VDI_ID 0 |
| |
| typedef struct SheepdogReq { |
| uint8_t proto_ver; |
| uint8_t opcode; |
| uint16_t flags; |
| uint32_t epoch; |
| uint32_t id; |
| uint32_t data_length; |
| uint32_t opcode_specific[8]; |
| } SheepdogReq; |
| |
| typedef struct SheepdogRsp { |
| uint8_t proto_ver; |
| uint8_t opcode; |
| uint16_t flags; |
| uint32_t epoch; |
| uint32_t id; |
| uint32_t data_length; |
| uint32_t result; |
| uint32_t opcode_specific[7]; |
| } SheepdogRsp; |
| |
| typedef struct SheepdogObjReq { |
| uint8_t proto_ver; |
| uint8_t opcode; |
| uint16_t flags; |
| uint32_t epoch; |
| uint32_t id; |
| uint32_t data_length; |
| uint64_t oid; |
| uint64_t cow_oid; |
| uint32_t copies; |
| uint32_t rsvd; |
| uint64_t offset; |
| } SheepdogObjReq; |
| |
| typedef struct SheepdogObjRsp { |
| uint8_t proto_ver; |
| uint8_t opcode; |
| uint16_t flags; |
| uint32_t epoch; |
| uint32_t id; |
| uint32_t data_length; |
| uint32_t result; |
| uint32_t copies; |
| uint32_t pad[6]; |
| } SheepdogObjRsp; |
| |
| typedef struct SheepdogVdiReq { |
| uint8_t proto_ver; |
| uint8_t opcode; |
| uint16_t flags; |
| uint32_t epoch; |
| uint32_t id; |
| uint32_t data_length; |
| uint64_t vdi_size; |
| uint32_t base_vdi_id; |
| uint32_t copies; |
| uint32_t snapid; |
| uint32_t pad[3]; |
| } SheepdogVdiReq; |
| |
| typedef struct SheepdogVdiRsp { |
| uint8_t proto_ver; |
| uint8_t opcode; |
| uint16_t flags; |
| uint32_t epoch; |
| uint32_t id; |
| uint32_t data_length; |
| uint32_t result; |
| uint32_t rsvd; |
| uint32_t vdi_id; |
| uint32_t pad[5]; |
| } SheepdogVdiRsp; |
| |
| typedef struct SheepdogInode { |
| char name[SD_MAX_VDI_LEN]; |
| char tag[SD_MAX_VDI_TAG_LEN]; |
| uint64_t ctime; |
| uint64_t snap_ctime; |
| uint64_t vm_clock_nsec; |
| uint64_t vdi_size; |
| uint64_t vm_state_size; |
| uint16_t copy_policy; |
| uint8_t nr_copies; |
| uint8_t block_size_shift; |
| uint32_t snap_id; |
| uint32_t vdi_id; |
| uint32_t parent_vdi_id; |
| uint32_t child_vdi_id[MAX_CHILDREN]; |
| uint32_t data_vdi_id[MAX_DATA_OBJS]; |
| } SheepdogInode; |
| |
| /* |
| * 64 bit FNV-1a non-zero initial basis |
| */ |
| #define FNV1A_64_INIT ((uint64_t)0xcbf29ce484222325ULL) |
| |
| /* |
| * 64 bit Fowler/Noll/Vo FNV-1a hash code |
| */ |
| static inline uint64_t fnv_64a_buf(void *buf, size_t len, uint64_t hval) |
| { |
| unsigned char *bp = buf; |
| unsigned char *be = bp + len; |
| while (bp < be) { |
| hval ^= (uint64_t) *bp++; |
| hval += (hval << 1) + (hval << 4) + (hval << 5) + |
| (hval << 7) + (hval << 8) + (hval << 40); |
| } |
| return hval; |
| } |
| |
| static inline int is_data_obj_writable(SheepdogInode *inode, unsigned int idx) |
| { |
| return inode->vdi_id == inode->data_vdi_id[idx]; |
| } |
| |
| static inline int is_data_obj(uint64_t oid) |
| { |
| return !(VDI_BIT & oid); |
| } |
| |
| static inline uint64_t data_oid_to_idx(uint64_t oid) |
| { |
| return oid & (MAX_DATA_OBJS - 1); |
| } |
| |
| static inline uint64_t vid_to_vdi_oid(uint32_t vid) |
| { |
| return VDI_BIT | ((uint64_t)vid << VDI_SPACE_SHIFT); |
| } |
| |
| static inline uint64_t vid_to_vmstate_oid(uint32_t vid, uint32_t idx) |
| { |
| return VMSTATE_BIT | ((uint64_t)vid << VDI_SPACE_SHIFT) | idx; |
| } |
| |
| static inline uint64_t vid_to_data_oid(uint32_t vid, uint32_t idx) |
| { |
| return ((uint64_t)vid << VDI_SPACE_SHIFT) | idx; |
| } |
| |
| static inline int is_snapshot(struct SheepdogInode *inode) |
| { |
| return !!inode->snap_ctime; |
| } |
| |
| #undef dprintf |
| #ifdef DEBUG_SDOG |
| #define dprintf(fmt, args...) \ |
| do { \ |
| fprintf(stdout, "%s %d: " fmt, __func__, __LINE__, ##args); \ |
| } while (0) |
| #else |
| #define dprintf(fmt, args...) |
| #endif |
| |
| typedef struct SheepdogAIOCB SheepdogAIOCB; |
| |
| typedef struct AIOReq { |
| SheepdogAIOCB *aiocb; |
| unsigned int iov_offset; |
| |
| uint64_t oid; |
| uint64_t base_oid; |
| uint64_t offset; |
| unsigned int data_len; |
| uint8_t flags; |
| uint32_t id; |
| |
| QLIST_ENTRY(AIOReq) outstanding_aio_siblings; |
| QLIST_ENTRY(AIOReq) aioreq_siblings; |
| } AIOReq; |
| |
| enum AIOCBState { |
| AIOCB_WRITE_UDATA, |
| AIOCB_READ_UDATA, |
| }; |
| |
| struct SheepdogAIOCB { |
| BlockDriverAIOCB common; |
| |
| QEMUIOVector *qiov; |
| |
| int64_t sector_num; |
| int nb_sectors; |
| |
| int ret; |
| enum AIOCBState aiocb_type; |
| |
| Coroutine *coroutine; |
| void (*aio_done_func)(SheepdogAIOCB *); |
| |
| int canceled; |
| |
| QLIST_HEAD(aioreq_head, AIOReq) aioreq_head; |
| }; |
| |
| typedef struct BDRVSheepdogState { |
| SheepdogInode inode; |
| |
| uint32_t min_dirty_data_idx; |
| uint32_t max_dirty_data_idx; |
| |
| char name[SD_MAX_VDI_LEN]; |
| int is_snapshot; |
| uint8_t cache_enabled; |
| |
| char *addr; |
| char *port; |
| int fd; |
| int flush_fd; |
| |
| CoMutex lock; |
| Coroutine *co_send; |
| Coroutine *co_recv; |
| |
| uint32_t aioreq_seq_num; |
| QLIST_HEAD(outstanding_aio_head, AIOReq) outstanding_aio_head; |
| } BDRVSheepdogState; |
| |
| static const char * sd_strerror(int err) |
| { |
| int i; |
| |
| static const struct { |
| int err; |
| const char *desc; |
| } errors[] = { |
| {SD_RES_SUCCESS, "Success"}, |
| {SD_RES_UNKNOWN, "Unknown error"}, |
| {SD_RES_NO_OBJ, "No object found"}, |
| {SD_RES_EIO, "I/O error"}, |
| {SD_RES_VDI_EXIST, "VDI exists already"}, |
| {SD_RES_INVALID_PARMS, "Invalid parameters"}, |
| {SD_RES_SYSTEM_ERROR, "System error"}, |
| {SD_RES_VDI_LOCKED, "VDI is already locked"}, |
| {SD_RES_NO_VDI, "No vdi found"}, |
| {SD_RES_NO_BASE_VDI, "No base VDI found"}, |
| {SD_RES_VDI_READ, "Failed read the requested VDI"}, |
| {SD_RES_VDI_WRITE, "Failed to write the requested VDI"}, |
| {SD_RES_BASE_VDI_READ, "Failed to read the base VDI"}, |
| {SD_RES_BASE_VDI_WRITE, "Failed to write the base VDI"}, |
| {SD_RES_NO_TAG, "Failed to find the requested tag"}, |
| {SD_RES_STARTUP, "The system is still booting"}, |
| {SD_RES_VDI_NOT_LOCKED, "VDI isn't locked"}, |
| {SD_RES_SHUTDOWN, "The system is shutting down"}, |
| {SD_RES_NO_MEM, "Out of memory on the server"}, |
| {SD_RES_FULL_VDI, "We already have the maximum vdis"}, |
| {SD_RES_VER_MISMATCH, "Protocol version mismatch"}, |
| {SD_RES_NO_SPACE, "Server has no space for new objects"}, |
| {SD_RES_WAIT_FOR_FORMAT, "Sheepdog is waiting for a format operation"}, |
| {SD_RES_WAIT_FOR_JOIN, "Sheepdog is waiting for other nodes joining"}, |
| {SD_RES_JOIN_FAILED, "Target node had failed to join sheepdog"}, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(errors); ++i) { |
| if (errors[i].err == err) { |
| return errors[i].desc; |
| } |
| } |
| |
| return "Invalid error code"; |
| } |
| |
| /* |
| * Sheepdog I/O handling: |
| * |
| * 1. In sd_co_rw_vector, we send the I/O requests to the server and |
| * link the requests to the outstanding_list in the |
| * BDRVSheepdogState. The function exits without waiting for |
| * receiving the response. |
| * |
| * 2. We receive the response in aio_read_response, the fd handler to |
| * the sheepdog connection. If metadata update is needed, we send |
| * the write request to the vdi object in sd_write_done, the write |
| * completion function. We switch back to sd_co_readv/writev after |
| * all the requests belonging to the AIOCB are finished. |
| */ |
| |
| static inline AIOReq *alloc_aio_req(BDRVSheepdogState *s, SheepdogAIOCB *acb, |
| uint64_t oid, unsigned int data_len, |
| uint64_t offset, uint8_t flags, |
| uint64_t base_oid, unsigned int iov_offset) |
| { |
| AIOReq *aio_req; |
| |
| aio_req = g_malloc(sizeof(*aio_req)); |
| aio_req->aiocb = acb; |
| aio_req->iov_offset = iov_offset; |
| aio_req->oid = oid; |
| aio_req->base_oid = base_oid; |
| aio_req->offset = offset; |
| aio_req->data_len = data_len; |
| aio_req->flags = flags; |
| aio_req->id = s->aioreq_seq_num++; |
| |
| QLIST_INSERT_HEAD(&s->outstanding_aio_head, aio_req, |
| outstanding_aio_siblings); |
| QLIST_INSERT_HEAD(&acb->aioreq_head, aio_req, aioreq_siblings); |
| |
| return aio_req; |
| } |
| |
| static inline int free_aio_req(BDRVSheepdogState *s, AIOReq *aio_req) |
| { |
| SheepdogAIOCB *acb = aio_req->aiocb; |
| QLIST_REMOVE(aio_req, outstanding_aio_siblings); |
| QLIST_REMOVE(aio_req, aioreq_siblings); |
| g_free(aio_req); |
| |
| return !QLIST_EMPTY(&acb->aioreq_head); |
| } |
| |
| static void coroutine_fn sd_finish_aiocb(SheepdogAIOCB *acb) |
| { |
| if (!acb->canceled) { |
| qemu_coroutine_enter(acb->coroutine, NULL); |
| } |
| qemu_aio_release(acb); |
| } |
| |
| static void sd_aio_cancel(BlockDriverAIOCB *blockacb) |
| { |
| SheepdogAIOCB *acb = (SheepdogAIOCB *)blockacb; |
| |
| /* |
| * Sheepdog cannot cancel the requests which are already sent to |
| * the servers, so we just complete the request with -EIO here. |
| */ |
| acb->ret = -EIO; |
| qemu_coroutine_enter(acb->coroutine, NULL); |
| acb->canceled = 1; |
| } |
| |
| static AIOPool sd_aio_pool = { |
| .aiocb_size = sizeof(SheepdogAIOCB), |
| .cancel = sd_aio_cancel, |
| }; |
| |
| static SheepdogAIOCB *sd_aio_setup(BlockDriverState *bs, QEMUIOVector *qiov, |
| int64_t sector_num, int nb_sectors, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| SheepdogAIOCB *acb; |
| |
| acb = qemu_aio_get(&sd_aio_pool, bs, cb, opaque); |
| |
| acb->qiov = qiov; |
| |
| acb->sector_num = sector_num; |
| acb->nb_sectors = nb_sectors; |
| |
| acb->aio_done_func = NULL; |
| acb->canceled = 0; |
| acb->coroutine = qemu_coroutine_self(); |
| acb->ret = 0; |
| QLIST_INIT(&acb->aioreq_head); |
| return acb; |
| } |
| |
| static int connect_to_sdog(const char *addr, const char *port) |
| { |
| char hbuf[NI_MAXHOST], sbuf[NI_MAXSERV]; |
| int fd, ret; |
| struct addrinfo hints, *res, *res0; |
| |
| if (!addr) { |
| addr = SD_DEFAULT_ADDR; |
| port = SD_DEFAULT_PORT; |
| } |
| |
| memset(&hints, 0, sizeof(hints)); |
| hints.ai_socktype = SOCK_STREAM; |
| |
| ret = getaddrinfo(addr, port, &hints, &res0); |
| if (ret) { |
| error_report("unable to get address info %s, %s", |
| addr, strerror(errno)); |
| return -1; |
| } |
| |
| for (res = res0; res; res = res->ai_next) { |
| ret = getnameinfo(res->ai_addr, res->ai_addrlen, hbuf, sizeof(hbuf), |
| sbuf, sizeof(sbuf), NI_NUMERICHOST | NI_NUMERICSERV); |
| if (ret) { |
| continue; |
| } |
| |
| fd = socket(res->ai_family, res->ai_socktype, res->ai_protocol); |
| if (fd < 0) { |
| continue; |
| } |
| |
| reconnect: |
| ret = connect(fd, res->ai_addr, res->ai_addrlen); |
| if (ret < 0) { |
| if (errno == EINTR) { |
| goto reconnect; |
| } |
| break; |
| } |
| |
| dprintf("connected to %s:%s\n", addr, port); |
| goto success; |
| } |
| fd = -1; |
| error_report("failed connect to %s:%s", addr, port); |
| success: |
| freeaddrinfo(res0); |
| return fd; |
| } |
| |
| static int send_req(int sockfd, SheepdogReq *hdr, void *data, |
| unsigned int *wlen) |
| { |
| int ret; |
| |
| ret = qemu_send_full(sockfd, hdr, sizeof(*hdr), 0); |
| if (ret < sizeof(*hdr)) { |
| error_report("failed to send a req, %s", strerror(errno)); |
| return ret; |
| } |
| |
| ret = qemu_send_full(sockfd, data, *wlen, 0); |
| if (ret < *wlen) { |
| error_report("failed to send a req, %s", strerror(errno)); |
| } |
| |
| return ret; |
| } |
| |
| static int send_co_req(int sockfd, SheepdogReq *hdr, void *data, |
| unsigned int *wlen) |
| { |
| int ret; |
| |
| ret = qemu_co_send(sockfd, hdr, sizeof(*hdr)); |
| if (ret < sizeof(*hdr)) { |
| error_report("failed to send a req, %s", strerror(errno)); |
| return ret; |
| } |
| |
| ret = qemu_co_send(sockfd, data, *wlen); |
| if (ret < *wlen) { |
| error_report("failed to send a req, %s", strerror(errno)); |
| } |
| |
| return ret; |
| } |
| static int do_req(int sockfd, SheepdogReq *hdr, void *data, |
| unsigned int *wlen, unsigned int *rlen) |
| { |
| int ret; |
| |
| socket_set_block(sockfd); |
| ret = send_req(sockfd, hdr, data, wlen); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| ret = qemu_recv_full(sockfd, hdr, sizeof(*hdr), 0); |
| if (ret < sizeof(*hdr)) { |
| error_report("failed to get a rsp, %s", strerror(errno)); |
| goto out; |
| } |
| |
| if (*rlen > hdr->data_length) { |
| *rlen = hdr->data_length; |
| } |
| |
| if (*rlen) { |
| ret = qemu_recv_full(sockfd, data, *rlen, 0); |
| if (ret < *rlen) { |
| error_report("failed to get the data, %s", strerror(errno)); |
| goto out; |
| } |
| } |
| ret = 0; |
| out: |
| socket_set_nonblock(sockfd); |
| return ret; |
| } |
| |
| static int do_co_req(int sockfd, SheepdogReq *hdr, void *data, |
| unsigned int *wlen, unsigned int *rlen) |
| { |
| int ret; |
| |
| socket_set_block(sockfd); |
| ret = send_co_req(sockfd, hdr, data, wlen); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| ret = qemu_co_recv(sockfd, hdr, sizeof(*hdr)); |
| if (ret < sizeof(*hdr)) { |
| error_report("failed to get a rsp, %s", strerror(errno)); |
| goto out; |
| } |
| |
| if (*rlen > hdr->data_length) { |
| *rlen = hdr->data_length; |
| } |
| |
| if (*rlen) { |
| ret = qemu_co_recv(sockfd, data, *rlen); |
| if (ret < *rlen) { |
| error_report("failed to get the data, %s", strerror(errno)); |
| goto out; |
| } |
| } |
| ret = 0; |
| out: |
| socket_set_nonblock(sockfd); |
| return ret; |
| } |
| |
| static int coroutine_fn add_aio_request(BDRVSheepdogState *s, AIOReq *aio_req, |
| struct iovec *iov, int niov, int create, |
| enum AIOCBState aiocb_type); |
| |
| /* |
| * This function searchs pending requests to the object `oid', and |
| * sends them. |
| */ |
| static void coroutine_fn send_pending_req(BDRVSheepdogState *s, uint64_t oid, uint32_t id) |
| { |
| AIOReq *aio_req, *next; |
| SheepdogAIOCB *acb; |
| int ret; |
| |
| QLIST_FOREACH_SAFE(aio_req, &s->outstanding_aio_head, |
| outstanding_aio_siblings, next) { |
| if (id == aio_req->id) { |
| continue; |
| } |
| if (aio_req->oid != oid) { |
| continue; |
| } |
| |
| acb = aio_req->aiocb; |
| ret = add_aio_request(s, aio_req, acb->qiov->iov, |
| acb->qiov->niov, 0, acb->aiocb_type); |
| if (ret < 0) { |
| error_report("add_aio_request is failed"); |
| free_aio_req(s, aio_req); |
| if (QLIST_EMPTY(&acb->aioreq_head)) { |
| sd_finish_aiocb(acb); |
| } |
| } |
| } |
| } |
| |
| /* |
| * Receive responses of the I/O requests. |
| * |
| * This function is registered as a fd handler, and called from the |
| * main loop when s->fd is ready for reading responses. |
| */ |
| static void coroutine_fn aio_read_response(void *opaque) |
| { |
| SheepdogObjRsp rsp; |
| BDRVSheepdogState *s = opaque; |
| int fd = s->fd; |
| int ret; |
| AIOReq *aio_req = NULL; |
| SheepdogAIOCB *acb; |
| int rest; |
| unsigned long idx; |
| |
| if (QLIST_EMPTY(&s->outstanding_aio_head)) { |
| goto out; |
| } |
| |
| /* read a header */ |
| ret = qemu_co_recv(fd, &rsp, sizeof(rsp)); |
| if (ret < 0) { |
| error_report("failed to get the header, %s", strerror(errno)); |
| goto out; |
| } |
| |
| /* find the right aio_req from the outstanding_aio list */ |
| QLIST_FOREACH(aio_req, &s->outstanding_aio_head, outstanding_aio_siblings) { |
| if (aio_req->id == rsp.id) { |
| break; |
| } |
| } |
| if (!aio_req) { |
| error_report("cannot find aio_req %x", rsp.id); |
| goto out; |
| } |
| |
| acb = aio_req->aiocb; |
| |
| switch (acb->aiocb_type) { |
| case AIOCB_WRITE_UDATA: |
| /* this coroutine context is no longer suitable for co_recv |
| * because we may send data to update vdi objects */ |
| s->co_recv = NULL; |
| if (!is_data_obj(aio_req->oid)) { |
| break; |
| } |
| idx = data_oid_to_idx(aio_req->oid); |
| |
| if (s->inode.data_vdi_id[idx] != s->inode.vdi_id) { |
| /* |
| * If the object is newly created one, we need to update |
| * the vdi object (metadata object). min_dirty_data_idx |
| * and max_dirty_data_idx are changed to include updated |
| * index between them. |
| */ |
| s->inode.data_vdi_id[idx] = s->inode.vdi_id; |
| s->max_dirty_data_idx = MAX(idx, s->max_dirty_data_idx); |
| s->min_dirty_data_idx = MIN(idx, s->min_dirty_data_idx); |
| |
| /* |
| * Some requests may be blocked because simultaneous |
| * create requests are not allowed, so we search the |
| * pending requests here. |
| */ |
| send_pending_req(s, vid_to_data_oid(s->inode.vdi_id, idx), rsp.id); |
| } |
| break; |
| case AIOCB_READ_UDATA: |
| ret = qemu_co_recvv(fd, acb->qiov->iov, rsp.data_length, |
| aio_req->iov_offset); |
| if (ret < 0) { |
| error_report("failed to get the data, %s", strerror(errno)); |
| goto out; |
| } |
| break; |
| } |
| |
| if (rsp.result != SD_RES_SUCCESS) { |
| acb->ret = -EIO; |
| error_report("%s", sd_strerror(rsp.result)); |
| } |
| |
| rest = free_aio_req(s, aio_req); |
| if (!rest) { |
| /* |
| * We've finished all requests which belong to the AIOCB, so |
| * we can switch back to sd_co_readv/writev now. |
| */ |
| acb->aio_done_func(acb); |
| } |
| out: |
| s->co_recv = NULL; |
| } |
| |
| static void co_read_response(void *opaque) |
| { |
| BDRVSheepdogState *s = opaque; |
| |
| if (!s->co_recv) { |
| s->co_recv = qemu_coroutine_create(aio_read_response); |
| } |
| |
| qemu_coroutine_enter(s->co_recv, opaque); |
| } |
| |
| static void co_write_request(void *opaque) |
| { |
| BDRVSheepdogState *s = opaque; |
| |
| qemu_coroutine_enter(s->co_send, NULL); |
| } |
| |
| static int aio_flush_request(void *opaque) |
| { |
| BDRVSheepdogState *s = opaque; |
| |
| return !QLIST_EMPTY(&s->outstanding_aio_head); |
| } |
| |
| static int set_nodelay(int fd) |
| { |
| int ret, opt; |
| |
| opt = 1; |
| ret = setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, (char *)&opt, sizeof(opt)); |
| return ret; |
| } |
| |
| /* |
| * Return a socket discriptor to read/write objects. |
| * |
| * We cannot use this discriptor for other operations because |
| * the block driver may be on waiting response from the server. |
| */ |
| static int get_sheep_fd(BDRVSheepdogState *s) |
| { |
| int ret, fd; |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| error_report("%s", strerror(errno)); |
| return -1; |
| } |
| |
| socket_set_nonblock(fd); |
| |
| ret = set_nodelay(fd); |
| if (ret) { |
| error_report("%s", strerror(errno)); |
| closesocket(fd); |
| return -1; |
| } |
| |
| qemu_aio_set_fd_handler(fd, co_read_response, NULL, aio_flush_request, s); |
| return fd; |
| } |
| |
| /* |
| * Parse a filename |
| * |
| * filename must be one of the following formats: |
| * 1. [vdiname] |
| * 2. [vdiname]:[snapid] |
| * 3. [vdiname]:[tag] |
| * 4. [hostname]:[port]:[vdiname] |
| * 5. [hostname]:[port]:[vdiname]:[snapid] |
| * 6. [hostname]:[port]:[vdiname]:[tag] |
| * |
| * You can boot from the snapshot images by specifying `snapid` or |
| * `tag'. |
| * |
| * You can run VMs outside the Sheepdog cluster by specifying |
| * `hostname' and `port' (experimental). |
| */ |
| static int parse_vdiname(BDRVSheepdogState *s, const char *filename, |
| char *vdi, uint32_t *snapid, char *tag) |
| { |
| char *p, *q; |
| int nr_sep; |
| |
| p = q = g_strdup(filename); |
| |
| /* count the number of separators */ |
| nr_sep = 0; |
| while (*p) { |
| if (*p == ':') { |
| nr_sep++; |
| } |
| p++; |
| } |
| p = q; |
| |
| /* use the first two tokens as hostname and port number. */ |
| if (nr_sep >= 2) { |
| s->addr = p; |
| p = strchr(p, ':'); |
| *p++ = '\0'; |
| |
| s->port = p; |
| p = strchr(p, ':'); |
| *p++ = '\0'; |
| } else { |
| s->addr = NULL; |
| s->port = 0; |
| } |
| |
| strncpy(vdi, p, SD_MAX_VDI_LEN); |
| |
| p = strchr(vdi, ':'); |
| if (p) { |
| *p++ = '\0'; |
| *snapid = strtoul(p, NULL, 10); |
| if (*snapid == 0) { |
| strncpy(tag, p, SD_MAX_VDI_TAG_LEN); |
| } |
| } else { |
| *snapid = CURRENT_VDI_ID; /* search current vdi */ |
| } |
| |
| if (s->addr == NULL) { |
| g_free(q); |
| } |
| |
| return 0; |
| } |
| |
| static int find_vdi_name(BDRVSheepdogState *s, char *filename, uint32_t snapid, |
| char *tag, uint32_t *vid, int for_snapshot) |
| { |
| int ret, fd; |
| SheepdogVdiReq hdr; |
| SheepdogVdiRsp *rsp = (SheepdogVdiRsp *)&hdr; |
| unsigned int wlen, rlen = 0; |
| char buf[SD_MAX_VDI_LEN + SD_MAX_VDI_TAG_LEN]; |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| return -1; |
| } |
| |
| memset(buf, 0, sizeof(buf)); |
| strncpy(buf, filename, SD_MAX_VDI_LEN); |
| strncpy(buf + SD_MAX_VDI_LEN, tag, SD_MAX_VDI_TAG_LEN); |
| |
| memset(&hdr, 0, sizeof(hdr)); |
| if (for_snapshot) { |
| hdr.opcode = SD_OP_GET_VDI_INFO; |
| } else { |
| hdr.opcode = SD_OP_LOCK_VDI; |
| } |
| wlen = SD_MAX_VDI_LEN + SD_MAX_VDI_TAG_LEN; |
| hdr.proto_ver = SD_PROTO_VER; |
| hdr.data_length = wlen; |
| hdr.snapid = snapid; |
| hdr.flags = SD_FLAG_CMD_WRITE; |
| |
| ret = do_req(fd, (SheepdogReq *)&hdr, buf, &wlen, &rlen); |
| if (ret) { |
| ret = -1; |
| goto out; |
| } |
| |
| if (rsp->result != SD_RES_SUCCESS) { |
| error_report("cannot get vdi info, %s, %s %d %s", |
| sd_strerror(rsp->result), filename, snapid, tag); |
| ret = -1; |
| goto out; |
| } |
| *vid = rsp->vdi_id; |
| |
| ret = 0; |
| out: |
| closesocket(fd); |
| return ret; |
| } |
| |
| static int coroutine_fn add_aio_request(BDRVSheepdogState *s, AIOReq *aio_req, |
| struct iovec *iov, int niov, int create, |
| enum AIOCBState aiocb_type) |
| { |
| int nr_copies = s->inode.nr_copies; |
| SheepdogObjReq hdr; |
| unsigned int wlen; |
| int ret; |
| uint64_t oid = aio_req->oid; |
| unsigned int datalen = aio_req->data_len; |
| uint64_t offset = aio_req->offset; |
| uint8_t flags = aio_req->flags; |
| uint64_t old_oid = aio_req->base_oid; |
| |
| if (!nr_copies) { |
| error_report("bug"); |
| } |
| |
| memset(&hdr, 0, sizeof(hdr)); |
| |
| if (aiocb_type == AIOCB_READ_UDATA) { |
| wlen = 0; |
| hdr.opcode = SD_OP_READ_OBJ; |
| hdr.flags = flags; |
| } else if (create) { |
| wlen = datalen; |
| hdr.opcode = SD_OP_CREATE_AND_WRITE_OBJ; |
| hdr.flags = SD_FLAG_CMD_WRITE | flags; |
| } else { |
| wlen = datalen; |
| hdr.opcode = SD_OP_WRITE_OBJ; |
| hdr.flags = SD_FLAG_CMD_WRITE | flags; |
| } |
| |
| if (s->cache_enabled) { |
| hdr.flags |= SD_FLAG_CMD_CACHE; |
| } |
| |
| hdr.oid = oid; |
| hdr.cow_oid = old_oid; |
| hdr.copies = s->inode.nr_copies; |
| |
| hdr.data_length = datalen; |
| hdr.offset = offset; |
| |
| hdr.id = aio_req->id; |
| |
| qemu_co_mutex_lock(&s->lock); |
| s->co_send = qemu_coroutine_self(); |
| qemu_aio_set_fd_handler(s->fd, co_read_response, co_write_request, |
| aio_flush_request, s); |
| socket_set_cork(s->fd, 1); |
| |
| /* send a header */ |
| ret = qemu_co_send(s->fd, &hdr, sizeof(hdr)); |
| if (ret < 0) { |
| qemu_co_mutex_unlock(&s->lock); |
| error_report("failed to send a req, %s", strerror(errno)); |
| return -EIO; |
| } |
| |
| if (wlen) { |
| ret = qemu_co_sendv(s->fd, iov, wlen, aio_req->iov_offset); |
| if (ret < 0) { |
| qemu_co_mutex_unlock(&s->lock); |
| error_report("failed to send a data, %s", strerror(errno)); |
| return -EIO; |
| } |
| } |
| |
| socket_set_cork(s->fd, 0); |
| qemu_aio_set_fd_handler(s->fd, co_read_response, NULL, |
| aio_flush_request, s); |
| qemu_co_mutex_unlock(&s->lock); |
| |
| return 0; |
| } |
| |
| static int read_write_object(int fd, char *buf, uint64_t oid, int copies, |
| unsigned int datalen, uint64_t offset, |
| int write, int create, uint8_t cache) |
| { |
| SheepdogObjReq hdr; |
| SheepdogObjRsp *rsp = (SheepdogObjRsp *)&hdr; |
| unsigned int wlen, rlen; |
| int ret; |
| |
| memset(&hdr, 0, sizeof(hdr)); |
| |
| if (write) { |
| wlen = datalen; |
| rlen = 0; |
| hdr.flags = SD_FLAG_CMD_WRITE; |
| if (create) { |
| hdr.opcode = SD_OP_CREATE_AND_WRITE_OBJ; |
| } else { |
| hdr.opcode = SD_OP_WRITE_OBJ; |
| } |
| } else { |
| wlen = 0; |
| rlen = datalen; |
| hdr.opcode = SD_OP_READ_OBJ; |
| } |
| |
| if (cache) { |
| hdr.flags |= SD_FLAG_CMD_CACHE; |
| } |
| |
| hdr.oid = oid; |
| hdr.data_length = datalen; |
| hdr.offset = offset; |
| hdr.copies = copies; |
| |
| ret = do_req(fd, (SheepdogReq *)&hdr, buf, &wlen, &rlen); |
| if (ret) { |
| error_report("failed to send a request to the sheep"); |
| return -1; |
| } |
| |
| switch (rsp->result) { |
| case SD_RES_SUCCESS: |
| return 0; |
| default: |
| error_report("%s", sd_strerror(rsp->result)); |
| return -1; |
| } |
| } |
| |
| static int read_object(int fd, char *buf, uint64_t oid, int copies, |
| unsigned int datalen, uint64_t offset, uint8_t cache) |
| { |
| return read_write_object(fd, buf, oid, copies, datalen, offset, 0, 0, |
| cache); |
| } |
| |
| static int write_object(int fd, char *buf, uint64_t oid, int copies, |
| unsigned int datalen, uint64_t offset, int create, |
| uint8_t cache) |
| { |
| return read_write_object(fd, buf, oid, copies, datalen, offset, 1, create, |
| cache); |
| } |
| |
| static int sd_open(BlockDriverState *bs, const char *filename, int flags) |
| { |
| int ret, fd; |
| uint32_t vid = 0; |
| BDRVSheepdogState *s = bs->opaque; |
| char vdi[SD_MAX_VDI_LEN], tag[SD_MAX_VDI_TAG_LEN]; |
| uint32_t snapid; |
| char *buf = NULL; |
| |
| strstart(filename, "sheepdog:", (const char **)&filename); |
| |
| QLIST_INIT(&s->outstanding_aio_head); |
| s->fd = -1; |
| |
| memset(vdi, 0, sizeof(vdi)); |
| memset(tag, 0, sizeof(tag)); |
| if (parse_vdiname(s, filename, vdi, &snapid, tag) < 0) { |
| goto out; |
| } |
| s->fd = get_sheep_fd(s); |
| if (s->fd < 0) { |
| goto out; |
| } |
| |
| ret = find_vdi_name(s, vdi, snapid, tag, &vid, 0); |
| if (ret) { |
| goto out; |
| } |
| |
| if (flags & BDRV_O_CACHE_WB) { |
| s->cache_enabled = 1; |
| s->flush_fd = connect_to_sdog(s->addr, s->port); |
| if (s->flush_fd < 0) { |
| error_report("failed to connect"); |
| goto out; |
| } |
| } |
| |
| if (snapid) { |
| dprintf("%" PRIx32 " snapshot inode was open.\n", vid); |
| s->is_snapshot = 1; |
| } |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| error_report("failed to connect"); |
| goto out; |
| } |
| |
| buf = g_malloc(SD_INODE_SIZE); |
| ret = read_object(fd, buf, vid_to_vdi_oid(vid), 0, SD_INODE_SIZE, 0, |
| s->cache_enabled); |
| |
| closesocket(fd); |
| |
| if (ret) { |
| goto out; |
| } |
| |
| memcpy(&s->inode, buf, sizeof(s->inode)); |
| s->min_dirty_data_idx = UINT32_MAX; |
| s->max_dirty_data_idx = 0; |
| |
| bs->total_sectors = s->inode.vdi_size / SECTOR_SIZE; |
| strncpy(s->name, vdi, sizeof(s->name)); |
| qemu_co_mutex_init(&s->lock); |
| g_free(buf); |
| return 0; |
| out: |
| qemu_aio_set_fd_handler(s->fd, NULL, NULL, NULL, NULL); |
| if (s->fd >= 0) { |
| closesocket(s->fd); |
| } |
| g_free(buf); |
| return -1; |
| } |
| |
| static int do_sd_create(char *filename, int64_t vdi_size, |
| uint32_t base_vid, uint32_t *vdi_id, int snapshot, |
| const char *addr, const char *port) |
| { |
| SheepdogVdiReq hdr; |
| SheepdogVdiRsp *rsp = (SheepdogVdiRsp *)&hdr; |
| int fd, ret; |
| unsigned int wlen, rlen = 0; |
| char buf[SD_MAX_VDI_LEN]; |
| |
| fd = connect_to_sdog(addr, port); |
| if (fd < 0) { |
| return -EIO; |
| } |
| |
| memset(buf, 0, sizeof(buf)); |
| strncpy(buf, filename, SD_MAX_VDI_LEN); |
| |
| memset(&hdr, 0, sizeof(hdr)); |
| hdr.opcode = SD_OP_NEW_VDI; |
| hdr.base_vdi_id = base_vid; |
| |
| wlen = SD_MAX_VDI_LEN; |
| |
| hdr.flags = SD_FLAG_CMD_WRITE; |
| hdr.snapid = snapshot; |
| |
| hdr.data_length = wlen; |
| hdr.vdi_size = vdi_size; |
| |
| ret = do_req(fd, (SheepdogReq *)&hdr, buf, &wlen, &rlen); |
| |
| closesocket(fd); |
| |
| if (ret) { |
| return -EIO; |
| } |
| |
| if (rsp->result != SD_RES_SUCCESS) { |
| error_report("%s, %s", sd_strerror(rsp->result), filename); |
| return -EIO; |
| } |
| |
| if (vdi_id) { |
| *vdi_id = rsp->vdi_id; |
| } |
| |
| return 0; |
| } |
| |
| static int sd_prealloc(const char *filename) |
| { |
| BlockDriverState *bs = NULL; |
| uint32_t idx, max_idx; |
| int64_t vdi_size; |
| void *buf = g_malloc0(SD_DATA_OBJ_SIZE); |
| int ret; |
| |
| ret = bdrv_file_open(&bs, filename, BDRV_O_RDWR); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| vdi_size = bdrv_getlength(bs); |
| if (vdi_size < 0) { |
| ret = vdi_size; |
| goto out; |
| } |
| max_idx = DIV_ROUND_UP(vdi_size, SD_DATA_OBJ_SIZE); |
| |
| for (idx = 0; idx < max_idx; idx++) { |
| /* |
| * The created image can be a cloned image, so we need to read |
| * a data from the source image. |
| */ |
| ret = bdrv_pread(bs, idx * SD_DATA_OBJ_SIZE, buf, SD_DATA_OBJ_SIZE); |
| if (ret < 0) { |
| goto out; |
| } |
| ret = bdrv_pwrite(bs, idx * SD_DATA_OBJ_SIZE, buf, SD_DATA_OBJ_SIZE); |
| if (ret < 0) { |
| goto out; |
| } |
| } |
| out: |
| if (bs) { |
| bdrv_delete(bs); |
| } |
| g_free(buf); |
| |
| return ret; |
| } |
| |
| static int sd_create(const char *filename, QEMUOptionParameter *options) |
| { |
| int ret; |
| uint32_t vid = 0, base_vid = 0; |
| int64_t vdi_size = 0; |
| char *backing_file = NULL; |
| BDRVSheepdogState s; |
| char vdi[SD_MAX_VDI_LEN], tag[SD_MAX_VDI_TAG_LEN]; |
| uint32_t snapid; |
| int prealloc = 0; |
| const char *vdiname; |
| |
| strstart(filename, "sheepdog:", &vdiname); |
| |
| memset(&s, 0, sizeof(s)); |
| memset(vdi, 0, sizeof(vdi)); |
| memset(tag, 0, sizeof(tag)); |
| if (parse_vdiname(&s, vdiname, vdi, &snapid, tag) < 0) { |
| error_report("invalid filename"); |
| return -EINVAL; |
| } |
| |
| while (options && options->name) { |
| if (!strcmp(options->name, BLOCK_OPT_SIZE)) { |
| vdi_size = options->value.n; |
| } else if (!strcmp(options->name, BLOCK_OPT_BACKING_FILE)) { |
| backing_file = options->value.s; |
| } else if (!strcmp(options->name, BLOCK_OPT_PREALLOC)) { |
| if (!options->value.s || !strcmp(options->value.s, "off")) { |
| prealloc = 0; |
| } else if (!strcmp(options->value.s, "full")) { |
| prealloc = 1; |
| } else { |
| error_report("Invalid preallocation mode: '%s'", |
| options->value.s); |
| return -EINVAL; |
| } |
| } |
| options++; |
| } |
| |
| if (vdi_size > SD_MAX_VDI_SIZE) { |
| error_report("too big image size"); |
| return -EINVAL; |
| } |
| |
| if (backing_file) { |
| BlockDriverState *bs; |
| BDRVSheepdogState *s; |
| BlockDriver *drv; |
| |
| /* Currently, only Sheepdog backing image is supported. */ |
| drv = bdrv_find_protocol(backing_file); |
| if (!drv || strcmp(drv->protocol_name, "sheepdog") != 0) { |
| error_report("backing_file must be a sheepdog image"); |
| return -EINVAL; |
| } |
| |
| ret = bdrv_file_open(&bs, backing_file, 0); |
| if (ret < 0) |
| return -EIO; |
| |
| s = bs->opaque; |
| |
| if (!is_snapshot(&s->inode)) { |
| error_report("cannot clone from a non snapshot vdi"); |
| bdrv_delete(bs); |
| return -EINVAL; |
| } |
| |
| base_vid = s->inode.vdi_id; |
| bdrv_delete(bs); |
| } |
| |
| ret = do_sd_create(vdi, vdi_size, base_vid, &vid, 0, s.addr, s.port); |
| if (!prealloc || ret) { |
| return ret; |
| } |
| |
| return sd_prealloc(filename); |
| } |
| |
| static void sd_close(BlockDriverState *bs) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| SheepdogVdiReq hdr; |
| SheepdogVdiRsp *rsp = (SheepdogVdiRsp *)&hdr; |
| unsigned int wlen, rlen = 0; |
| int fd, ret; |
| |
| dprintf("%s\n", s->name); |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| return; |
| } |
| |
| memset(&hdr, 0, sizeof(hdr)); |
| |
| hdr.opcode = SD_OP_RELEASE_VDI; |
| wlen = strlen(s->name) + 1; |
| hdr.data_length = wlen; |
| hdr.flags = SD_FLAG_CMD_WRITE; |
| |
| ret = do_req(fd, (SheepdogReq *)&hdr, s->name, &wlen, &rlen); |
| |
| closesocket(fd); |
| |
| if (!ret && rsp->result != SD_RES_SUCCESS && |
| rsp->result != SD_RES_VDI_NOT_LOCKED) { |
| error_report("%s, %s", sd_strerror(rsp->result), s->name); |
| } |
| |
| qemu_aio_set_fd_handler(s->fd, NULL, NULL, NULL, NULL); |
| closesocket(s->fd); |
| if (s->cache_enabled) { |
| closesocket(s->flush_fd); |
| } |
| g_free(s->addr); |
| } |
| |
| static int64_t sd_getlength(BlockDriverState *bs) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| |
| return s->inode.vdi_size; |
| } |
| |
| static int sd_truncate(BlockDriverState *bs, int64_t offset) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| int ret, fd; |
| unsigned int datalen; |
| |
| if (offset < s->inode.vdi_size) { |
| error_report("shrinking is not supported"); |
| return -EINVAL; |
| } else if (offset > SD_MAX_VDI_SIZE) { |
| error_report("too big image size"); |
| return -EINVAL; |
| } |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| return -EIO; |
| } |
| |
| /* we don't need to update entire object */ |
| datalen = SD_INODE_SIZE - sizeof(s->inode.data_vdi_id); |
| s->inode.vdi_size = offset; |
| ret = write_object(fd, (char *)&s->inode, vid_to_vdi_oid(s->inode.vdi_id), |
| s->inode.nr_copies, datalen, 0, 0, s->cache_enabled); |
| close(fd); |
| |
| if (ret < 0) { |
| error_report("failed to update an inode."); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function is called after writing data objects. If we need to |
| * update metadata, this sends a write request to the vdi object. |
| * Otherwise, this switches back to sd_co_readv/writev. |
| */ |
| static void coroutine_fn sd_write_done(SheepdogAIOCB *acb) |
| { |
| int ret; |
| BDRVSheepdogState *s = acb->common.bs->opaque; |
| struct iovec iov; |
| AIOReq *aio_req; |
| uint32_t offset, data_len, mn, mx; |
| |
| mn = s->min_dirty_data_idx; |
| mx = s->max_dirty_data_idx; |
| if (mn <= mx) { |
| /* we need to update the vdi object. */ |
| offset = sizeof(s->inode) - sizeof(s->inode.data_vdi_id) + |
| mn * sizeof(s->inode.data_vdi_id[0]); |
| data_len = (mx - mn + 1) * sizeof(s->inode.data_vdi_id[0]); |
| |
| s->min_dirty_data_idx = UINT32_MAX; |
| s->max_dirty_data_idx = 0; |
| |
| iov.iov_base = &s->inode; |
| iov.iov_len = sizeof(s->inode); |
| aio_req = alloc_aio_req(s, acb, vid_to_vdi_oid(s->inode.vdi_id), |
| data_len, offset, 0, 0, offset); |
| ret = add_aio_request(s, aio_req, &iov, 1, 0, AIOCB_WRITE_UDATA); |
| if (ret) { |
| free_aio_req(s, aio_req); |
| acb->ret = -EIO; |
| goto out; |
| } |
| |
| acb->aio_done_func = sd_finish_aiocb; |
| acb->aiocb_type = AIOCB_WRITE_UDATA; |
| return; |
| } |
| out: |
| sd_finish_aiocb(acb); |
| } |
| |
| /* |
| * Create a writable VDI from a snapshot |
| */ |
| static int sd_create_branch(BDRVSheepdogState *s) |
| { |
| int ret, fd; |
| uint32_t vid; |
| char *buf; |
| |
| dprintf("%" PRIx32 " is snapshot.\n", s->inode.vdi_id); |
| |
| buf = g_malloc(SD_INODE_SIZE); |
| |
| ret = do_sd_create(s->name, s->inode.vdi_size, s->inode.vdi_id, &vid, 1, |
| s->addr, s->port); |
| if (ret) { |
| goto out; |
| } |
| |
| dprintf("%" PRIx32 " is created.\n", vid); |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| error_report("failed to connect"); |
| goto out; |
| } |
| |
| ret = read_object(fd, buf, vid_to_vdi_oid(vid), s->inode.nr_copies, |
| SD_INODE_SIZE, 0, s->cache_enabled); |
| |
| closesocket(fd); |
| |
| if (ret < 0) { |
| goto out; |
| } |
| |
| memcpy(&s->inode, buf, sizeof(s->inode)); |
| |
| s->is_snapshot = 0; |
| ret = 0; |
| dprintf("%" PRIx32 " was newly created.\n", s->inode.vdi_id); |
| |
| out: |
| g_free(buf); |
| |
| return ret; |
| } |
| |
| /* |
| * Send I/O requests to the server. |
| * |
| * This function sends requests to the server, links the requests to |
| * the outstanding_list in BDRVSheepdogState, and exits without |
| * waiting the response. The responses are received in the |
| * `aio_read_response' function which is called from the main loop as |
| * a fd handler. |
| * |
| * Returns 1 when we need to wait a response, 0 when there is no sent |
| * request and -errno in error cases. |
| */ |
| static int coroutine_fn sd_co_rw_vector(void *p) |
| { |
| SheepdogAIOCB *acb = p; |
| int ret = 0; |
| unsigned long len, done = 0, total = acb->nb_sectors * SECTOR_SIZE; |
| unsigned long idx = acb->sector_num * SECTOR_SIZE / SD_DATA_OBJ_SIZE; |
| uint64_t oid; |
| uint64_t offset = (acb->sector_num * SECTOR_SIZE) % SD_DATA_OBJ_SIZE; |
| BDRVSheepdogState *s = acb->common.bs->opaque; |
| SheepdogInode *inode = &s->inode; |
| AIOReq *aio_req; |
| |
| if (acb->aiocb_type == AIOCB_WRITE_UDATA && s->is_snapshot) { |
| /* |
| * In the case we open the snapshot VDI, Sheepdog creates the |
| * writable VDI when we do a write operation first. |
| */ |
| ret = sd_create_branch(s); |
| if (ret) { |
| acb->ret = -EIO; |
| goto out; |
| } |
| } |
| |
| while (done != total) { |
| uint8_t flags = 0; |
| uint64_t old_oid = 0; |
| int create = 0; |
| |
| oid = vid_to_data_oid(inode->data_vdi_id[idx], idx); |
| |
| len = MIN(total - done, SD_DATA_OBJ_SIZE - offset); |
| |
| if (!inode->data_vdi_id[idx]) { |
| if (acb->aiocb_type == AIOCB_READ_UDATA) { |
| goto done; |
| } |
| |
| create = 1; |
| } else if (acb->aiocb_type == AIOCB_WRITE_UDATA |
| && !is_data_obj_writable(inode, idx)) { |
| /* Copy-On-Write */ |
| create = 1; |
| old_oid = oid; |
| flags = SD_FLAG_CMD_COW; |
| } |
| |
| if (create) { |
| dprintf("update ino (%" PRIu32") %" PRIu64 " %" PRIu64 |
| " %" PRIu64 "\n", inode->vdi_id, oid, |
| vid_to_data_oid(inode->data_vdi_id[idx], idx), idx); |
| oid = vid_to_data_oid(inode->vdi_id, idx); |
| dprintf("new oid %lx\n", oid); |
| } |
| |
| aio_req = alloc_aio_req(s, acb, oid, len, offset, flags, old_oid, done); |
| |
| if (create) { |
| AIOReq *areq; |
| QLIST_FOREACH(areq, &s->outstanding_aio_head, |
| outstanding_aio_siblings) { |
| if (areq == aio_req) { |
| continue; |
| } |
| if (areq->oid == oid) { |
| /* |
| * Sheepdog cannot handle simultaneous create |
| * requests to the same object. So we cannot send |
| * the request until the previous request |
| * finishes. |
| */ |
| aio_req->flags = 0; |
| aio_req->base_oid = 0; |
| goto done; |
| } |
| } |
| } |
| |
| ret = add_aio_request(s, aio_req, acb->qiov->iov, acb->qiov->niov, |
| create, acb->aiocb_type); |
| if (ret < 0) { |
| error_report("add_aio_request is failed"); |
| free_aio_req(s, aio_req); |
| acb->ret = -EIO; |
| goto out; |
| } |
| done: |
| offset = 0; |
| idx++; |
| done += len; |
| } |
| out: |
| if (QLIST_EMPTY(&acb->aioreq_head)) { |
| return acb->ret; |
| } |
| return 1; |
| } |
| |
| static coroutine_fn int sd_co_writev(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors, QEMUIOVector *qiov) |
| { |
| SheepdogAIOCB *acb; |
| int ret; |
| |
| if (bs->growable && sector_num + nb_sectors > bs->total_sectors) { |
| /* TODO: shouldn't block here */ |
| if (sd_truncate(bs, (sector_num + nb_sectors) * SECTOR_SIZE) < 0) { |
| return -EIO; |
| } |
| bs->total_sectors = sector_num + nb_sectors; |
| } |
| |
| acb = sd_aio_setup(bs, qiov, sector_num, nb_sectors, NULL, NULL); |
| acb->aio_done_func = sd_write_done; |
| acb->aiocb_type = AIOCB_WRITE_UDATA; |
| |
| ret = sd_co_rw_vector(acb); |
| if (ret <= 0) { |
| qemu_aio_release(acb); |
| return ret; |
| } |
| |
| qemu_coroutine_yield(); |
| |
| return acb->ret; |
| } |
| |
| static coroutine_fn int sd_co_readv(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors, QEMUIOVector *qiov) |
| { |
| SheepdogAIOCB *acb; |
| int i, ret; |
| |
| acb = sd_aio_setup(bs, qiov, sector_num, nb_sectors, NULL, NULL); |
| acb->aiocb_type = AIOCB_READ_UDATA; |
| acb->aio_done_func = sd_finish_aiocb; |
| |
| /* |
| * TODO: we can do better; we don't need to initialize |
| * blindly. |
| */ |
| for (i = 0; i < qiov->niov; i++) { |
| memset(qiov->iov[i].iov_base, 0, qiov->iov[i].iov_len); |
| } |
| |
| ret = sd_co_rw_vector(acb); |
| if (ret <= 0) { |
| qemu_aio_release(acb); |
| return ret; |
| } |
| |
| qemu_coroutine_yield(); |
| |
| return acb->ret; |
| } |
| |
| static int coroutine_fn sd_co_flush_to_disk(BlockDriverState *bs) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| SheepdogObjReq hdr = { 0 }; |
| SheepdogObjRsp *rsp = (SheepdogObjRsp *)&hdr; |
| SheepdogInode *inode = &s->inode; |
| int ret; |
| unsigned int wlen = 0, rlen = 0; |
| |
| if (!s->cache_enabled) { |
| return 0; |
| } |
| |
| hdr.opcode = SD_OP_FLUSH_VDI; |
| hdr.oid = vid_to_vdi_oid(inode->vdi_id); |
| |
| ret = do_co_req(s->flush_fd, (SheepdogReq *)&hdr, NULL, &wlen, &rlen); |
| if (ret) { |
| error_report("failed to send a request to the sheep"); |
| return ret; |
| } |
| |
| if (rsp->result != SD_RES_SUCCESS) { |
| error_report("%s", sd_strerror(rsp->result)); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| int ret, fd; |
| uint32_t new_vid; |
| SheepdogInode *inode; |
| unsigned int datalen; |
| |
| dprintf("sn_info: name %s id_str %s s: name %s vm_state_size %d " |
| "is_snapshot %d\n", sn_info->name, sn_info->id_str, |
| s->name, sn_info->vm_state_size, s->is_snapshot); |
| |
| if (s->is_snapshot) { |
| error_report("You can't create a snapshot of a snapshot VDI, " |
| "%s (%" PRIu32 ").", s->name, s->inode.vdi_id); |
| |
| return -EINVAL; |
| } |
| |
| dprintf("%s %s\n", sn_info->name, sn_info->id_str); |
| |
| s->inode.vm_state_size = sn_info->vm_state_size; |
| s->inode.vm_clock_nsec = sn_info->vm_clock_nsec; |
| strncpy(s->inode.tag, sn_info->name, sizeof(s->inode.tag)); |
| /* we don't need to update entire object */ |
| datalen = SD_INODE_SIZE - sizeof(s->inode.data_vdi_id); |
| |
| /* refresh inode. */ |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| ret = -EIO; |
| goto cleanup; |
| } |
| |
| ret = write_object(fd, (char *)&s->inode, vid_to_vdi_oid(s->inode.vdi_id), |
| s->inode.nr_copies, datalen, 0, 0, s->cache_enabled); |
| if (ret < 0) { |
| error_report("failed to write snapshot's inode."); |
| ret = -EIO; |
| goto cleanup; |
| } |
| |
| ret = do_sd_create(s->name, s->inode.vdi_size, s->inode.vdi_id, &new_vid, 1, |
| s->addr, s->port); |
| if (ret < 0) { |
| error_report("failed to create inode for snapshot. %s", |
| strerror(errno)); |
| ret = -EIO; |
| goto cleanup; |
| } |
| |
| inode = (SheepdogInode *)g_malloc(datalen); |
| |
| ret = read_object(fd, (char *)inode, vid_to_vdi_oid(new_vid), |
| s->inode.nr_copies, datalen, 0, s->cache_enabled); |
| |
| if (ret < 0) { |
| error_report("failed to read new inode info. %s", strerror(errno)); |
| ret = -EIO; |
| goto cleanup; |
| } |
| |
| memcpy(&s->inode, inode, datalen); |
| dprintf("s->inode: name %s snap_id %x oid %x\n", |
| s->inode.name, s->inode.snap_id, s->inode.vdi_id); |
| |
| cleanup: |
| closesocket(fd); |
| return ret; |
| } |
| |
| static int sd_snapshot_goto(BlockDriverState *bs, const char *snapshot_id) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| BDRVSheepdogState *old_s; |
| char vdi[SD_MAX_VDI_LEN], tag[SD_MAX_VDI_TAG_LEN]; |
| char *buf = NULL; |
| uint32_t vid; |
| uint32_t snapid = 0; |
| int ret = -ENOENT, fd; |
| |
| old_s = g_malloc(sizeof(BDRVSheepdogState)); |
| |
| memcpy(old_s, s, sizeof(BDRVSheepdogState)); |
| |
| memset(vdi, 0, sizeof(vdi)); |
| strncpy(vdi, s->name, sizeof(vdi)); |
| |
| memset(tag, 0, sizeof(tag)); |
| snapid = strtoul(snapshot_id, NULL, 10); |
| if (!snapid) { |
| strncpy(tag, s->name, sizeof(tag)); |
| } |
| |
| ret = find_vdi_name(s, vdi, snapid, tag, &vid, 1); |
| if (ret) { |
| error_report("Failed to find_vdi_name"); |
| ret = -ENOENT; |
| goto out; |
| } |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| error_report("failed to connect"); |
| goto out; |
| } |
| |
| buf = g_malloc(SD_INODE_SIZE); |
| ret = read_object(fd, buf, vid_to_vdi_oid(vid), s->inode.nr_copies, |
| SD_INODE_SIZE, 0, s->cache_enabled); |
| |
| closesocket(fd); |
| |
| if (ret) { |
| ret = -ENOENT; |
| goto out; |
| } |
| |
| memcpy(&s->inode, buf, sizeof(s->inode)); |
| |
| if (!s->inode.vm_state_size) { |
| error_report("Invalid snapshot"); |
| ret = -ENOENT; |
| goto out; |
| } |
| |
| s->is_snapshot = 1; |
| |
| g_free(buf); |
| g_free(old_s); |
| |
| return 0; |
| out: |
| /* recover bdrv_sd_state */ |
| memcpy(s, old_s, sizeof(BDRVSheepdogState)); |
| g_free(buf); |
| g_free(old_s); |
| |
| error_report("failed to open. recover old bdrv_sd_state."); |
| |
| return ret; |
| } |
| |
| static int sd_snapshot_delete(BlockDriverState *bs, const char *snapshot_id) |
| { |
| /* FIXME: Delete specified snapshot id. */ |
| return 0; |
| } |
| |
| static int sd_snapshot_list(BlockDriverState *bs, QEMUSnapshotInfo **psn_tab) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| SheepdogReq req; |
| int fd, nr = 1024, ret, max = BITS_TO_LONGS(SD_NR_VDIS) * sizeof(long); |
| QEMUSnapshotInfo *sn_tab = NULL; |
| unsigned wlen, rlen; |
| int found = 0; |
| static SheepdogInode inode; |
| unsigned long *vdi_inuse; |
| unsigned int start_nr; |
| uint64_t hval; |
| uint32_t vid; |
| |
| vdi_inuse = g_malloc(max); |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| goto out; |
| } |
| |
| rlen = max; |
| wlen = 0; |
| |
| memset(&req, 0, sizeof(req)); |
| |
| req.opcode = SD_OP_READ_VDIS; |
| req.data_length = max; |
| |
| ret = do_req(fd, (SheepdogReq *)&req, vdi_inuse, &wlen, &rlen); |
| |
| closesocket(fd); |
| if (ret) { |
| goto out; |
| } |
| |
| sn_tab = g_malloc0(nr * sizeof(*sn_tab)); |
| |
| /* calculate a vdi id with hash function */ |
| hval = fnv_64a_buf(s->name, strlen(s->name), FNV1A_64_INIT); |
| start_nr = hval & (SD_NR_VDIS - 1); |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| error_report("failed to connect"); |
| goto out; |
| } |
| |
| for (vid = start_nr; found < nr; vid = (vid + 1) % SD_NR_VDIS) { |
| if (!test_bit(vid, vdi_inuse)) { |
| break; |
| } |
| |
| /* we don't need to read entire object */ |
| ret = read_object(fd, (char *)&inode, vid_to_vdi_oid(vid), |
| 0, SD_INODE_SIZE - sizeof(inode.data_vdi_id), 0, |
| s->cache_enabled); |
| |
| if (ret) { |
| continue; |
| } |
| |
| if (!strcmp(inode.name, s->name) && is_snapshot(&inode)) { |
| sn_tab[found].date_sec = inode.snap_ctime >> 32; |
| sn_tab[found].date_nsec = inode.snap_ctime & 0xffffffff; |
| sn_tab[found].vm_state_size = inode.vm_state_size; |
| sn_tab[found].vm_clock_nsec = inode.vm_clock_nsec; |
| |
| snprintf(sn_tab[found].id_str, sizeof(sn_tab[found].id_str), "%u", |
| inode.snap_id); |
| strncpy(sn_tab[found].name, inode.tag, |
| MIN(sizeof(sn_tab[found].name), sizeof(inode.tag))); |
| found++; |
| } |
| } |
| |
| closesocket(fd); |
| out: |
| *psn_tab = sn_tab; |
| |
| g_free(vdi_inuse); |
| |
| return found; |
| } |
| |
| static int do_load_save_vmstate(BDRVSheepdogState *s, uint8_t *data, |
| int64_t pos, int size, int load) |
| { |
| int fd, create; |
| int ret = 0; |
| unsigned int data_len; |
| uint64_t vmstate_oid; |
| uint32_t vdi_index; |
| uint64_t offset; |
| |
| fd = connect_to_sdog(s->addr, s->port); |
| if (fd < 0) { |
| ret = -EIO; |
| goto cleanup; |
| } |
| |
| while (size) { |
| vdi_index = pos / SD_DATA_OBJ_SIZE; |
| offset = pos % SD_DATA_OBJ_SIZE; |
| |
| data_len = MIN(size, SD_DATA_OBJ_SIZE); |
| |
| vmstate_oid = vid_to_vmstate_oid(s->inode.vdi_id, vdi_index); |
| |
| create = (offset == 0); |
| if (load) { |
| ret = read_object(fd, (char *)data, vmstate_oid, |
| s->inode.nr_copies, data_len, offset, |
| s->cache_enabled); |
| } else { |
| ret = write_object(fd, (char *)data, vmstate_oid, |
| s->inode.nr_copies, data_len, offset, create, |
| s->cache_enabled); |
| } |
| |
| if (ret < 0) { |
| error_report("failed to save vmstate %s", strerror(errno)); |
| ret = -EIO; |
| goto cleanup; |
| } |
| |
| pos += data_len; |
| size -= data_len; |
| ret += data_len; |
| } |
| cleanup: |
| closesocket(fd); |
| return ret; |
| } |
| |
| static int sd_save_vmstate(BlockDriverState *bs, const uint8_t *data, |
| int64_t pos, int size) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| |
| return do_load_save_vmstate(s, (uint8_t *)data, pos, size, 0); |
| } |
| |
| static int sd_load_vmstate(BlockDriverState *bs, uint8_t *data, |
| int64_t pos, int size) |
| { |
| BDRVSheepdogState *s = bs->opaque; |
| |
| return do_load_save_vmstate(s, data, pos, size, 1); |
| } |
| |
| |
| static QEMUOptionParameter sd_create_options[] = { |
| { |
| .name = BLOCK_OPT_SIZE, |
| .type = OPT_SIZE, |
| .help = "Virtual disk size" |
| }, |
| { |
| .name = BLOCK_OPT_BACKING_FILE, |
| .type = OPT_STRING, |
| .help = "File name of a base image" |
| }, |
| { |
| .name = BLOCK_OPT_PREALLOC, |
| .type = OPT_STRING, |
| .help = "Preallocation mode (allowed values: off, full)" |
| }, |
| { NULL } |
| }; |
| |
| BlockDriver bdrv_sheepdog = { |
| .format_name = "sheepdog", |
| .protocol_name = "sheepdog", |
| .instance_size = sizeof(BDRVSheepdogState), |
| .bdrv_file_open = sd_open, |
| .bdrv_close = sd_close, |
| .bdrv_create = sd_create, |
| .bdrv_getlength = sd_getlength, |
| .bdrv_truncate = sd_truncate, |
| |
| .bdrv_co_readv = sd_co_readv, |
| .bdrv_co_writev = sd_co_writev, |
| .bdrv_co_flush_to_disk = sd_co_flush_to_disk, |
| |
| .bdrv_snapshot_create = sd_snapshot_create, |
| .bdrv_snapshot_goto = sd_snapshot_goto, |
| .bdrv_snapshot_delete = sd_snapshot_delete, |
| .bdrv_snapshot_list = sd_snapshot_list, |
| |
| .bdrv_save_vmstate = sd_save_vmstate, |
| .bdrv_load_vmstate = sd_load_vmstate, |
| |
| .create_options = sd_create_options, |
| }; |
| |
| static void bdrv_sheepdog_init(void) |
| { |
| bdrv_register(&bdrv_sheepdog); |
| } |
| block_init(bdrv_sheepdog_init); |