| /* |
| * QEMU ICH Emulation |
| * |
| * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de> |
| * Copyright (c) 2010 Alexander Graf <agraf@suse.de> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * |
| * lspci dump of a ICH-9 real device |
| * |
| * 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0]) |
| * Subsystem: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] |
| * Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ |
| * Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
| * Latency: 0 |
| * Interrupt: pin B routed to IRQ 222 |
| * Region 0: I/O ports at d000 [size=8] |
| * Region 1: I/O ports at cc00 [size=4] |
| * Region 2: I/O ports at c880 [size=8] |
| * Region 3: I/O ports at c800 [size=4] |
| * Region 4: I/O ports at c480 [size=32] |
| * Region 5: Memory at febf9000 (32-bit, non-prefetchable) [size=2K] |
| * Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/16 Enable+ |
| * Address: fee0f00c Data: 41d9 |
| * Capabilities: [70] Power Management version 3 |
| * Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) |
| * Status: D0 PME-Enable- DSel=0 DScale=0 PME- |
| * Capabilities: [a8] SATA HBA <?> |
| * Capabilities: [b0] Vendor Specific Information <?> |
| * Kernel driver in use: ahci |
| * Kernel modules: ahci |
| * 00: 86 80 22 29 07 04 b0 02 02 01 06 01 00 00 00 00 |
| * 10: 01 d0 00 00 01 cc 00 00 81 c8 00 00 01 c8 00 00 |
| * 20: 81 c4 00 00 00 90 bf fe 00 00 00 00 86 80 22 29 |
| * 30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00 |
| * 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 |
| * 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| * 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| * 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00 |
| * 80: 05 70 09 00 0c f0 e0 fe d9 41 00 00 00 00 00 00 |
| * 90: 40 00 0f 82 93 01 00 00 00 00 00 00 00 00 00 00 |
| * a0: ac 00 00 00 0a 00 12 00 12 b0 10 00 48 00 00 00 |
| * b0: 09 00 06 20 00 00 00 00 00 00 00 00 00 00 00 00 |
| * c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| * d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| * e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| * f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00 |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/irq.h" |
| #include "hw/pci/msi.h" |
| #include "hw/pci/pci.h" |
| #include "migration/vmstate.h" |
| #include "qemu/module.h" |
| #include "hw/isa/isa.h" |
| #include "sysemu/dma.h" |
| #include "hw/ide/pci.h" |
| #include "hw/ide/ahci-pci.h" |
| #include "ahci-internal.h" |
| |
| #define ICH9_MSI_CAP_OFFSET 0x80 |
| #define ICH9_SATA_CAP_OFFSET 0xA8 |
| |
| #define ICH9_IDP_BAR 4 |
| #define ICH9_MEM_BAR 5 |
| |
| #define ICH9_IDP_INDEX 0x10 |
| #define ICH9_IDP_INDEX_LOG2 0x04 |
| |
| static const VMStateDescription vmstate_ich9_ahci = { |
| .name = "ich9_ahci", |
| .version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_PCI_DEVICE(parent_obj, AHCIPCIState), |
| VMSTATE_AHCI(ahci, AHCIPCIState), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static void pci_ich9_reset(DeviceState *dev) |
| { |
| AHCIPCIState *d = ICH9_AHCI(dev); |
| |
| ahci_reset(&d->ahci); |
| } |
| |
| static void pci_ich9_ahci_init(Object *obj) |
| { |
| AHCIPCIState *d = ICH9_AHCI(obj); |
| |
| ahci_init(&d->ahci, DEVICE(obj)); |
| } |
| |
| static void pci_ich9_ahci_realize(PCIDevice *dev, Error **errp) |
| { |
| AHCIPCIState *d; |
| int sata_cap_offset; |
| uint8_t *sata_cap; |
| d = ICH9_AHCI(dev); |
| int ret; |
| |
| d->ahci.ports = 6; |
| ahci_realize(&d->ahci, DEVICE(dev), pci_get_address_space(dev)); |
| |
| pci_config_set_prog_interface(dev->config, AHCI_PROGMODE_MAJOR_REV_1); |
| |
| dev->config[PCI_CACHE_LINE_SIZE] = 0x08; /* Cache line size */ |
| dev->config[PCI_LATENCY_TIMER] = 0x00; /* Latency timer */ |
| pci_config_set_interrupt_pin(dev->config, 1); |
| |
| /* XXX Software should program this register */ |
| dev->config[0x90] = 1 << 6; /* Address Map Register - AHCI mode */ |
| |
| d->ahci.irq = pci_allocate_irq(dev); |
| |
| pci_register_bar(dev, ICH9_IDP_BAR, PCI_BASE_ADDRESS_SPACE_IO, |
| &d->ahci.idp); |
| pci_register_bar(dev, ICH9_MEM_BAR, PCI_BASE_ADDRESS_SPACE_MEMORY, |
| &d->ahci.mem); |
| |
| sata_cap_offset = pci_add_capability(dev, PCI_CAP_ID_SATA, |
| ICH9_SATA_CAP_OFFSET, SATA_CAP_SIZE, |
| errp); |
| if (sata_cap_offset < 0) { |
| return; |
| } |
| |
| sata_cap = dev->config + sata_cap_offset; |
| pci_set_word(sata_cap + SATA_CAP_REV, 0x10); |
| pci_set_long(sata_cap + SATA_CAP_BAR, |
| (ICH9_IDP_BAR + 0x4) | (ICH9_IDP_INDEX_LOG2 << 4)); |
| d->ahci.idp_offset = ICH9_IDP_INDEX; |
| |
| /* Although the AHCI 1.3 specification states that the first capability |
| * should be PMCAP, the Intel ICH9 data sheet specifies that the ICH9 |
| * AHCI device puts the MSI capability first, pointing to 0x80. */ |
| ret = msi_init(dev, ICH9_MSI_CAP_OFFSET, 1, true, false, NULL); |
| /* Any error other than -ENOTSUP(board's MSI support is broken) |
| * is a programming error. Fall back to INTx silently on -ENOTSUP */ |
| assert(!ret || ret == -ENOTSUP); |
| } |
| |
| static void pci_ich9_uninit(PCIDevice *dev) |
| { |
| AHCIPCIState *d; |
| d = ICH9_AHCI(dev); |
| |
| msi_uninit(dev); |
| ahci_uninit(&d->ahci); |
| qemu_free_irq(d->ahci.irq); |
| } |
| |
| static void ich_ahci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->realize = pci_ich9_ahci_realize; |
| k->exit = pci_ich9_uninit; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| k->device_id = PCI_DEVICE_ID_INTEL_82801IR; |
| k->revision = 0x02; |
| k->class_id = PCI_CLASS_STORAGE_SATA; |
| dc->vmsd = &vmstate_ich9_ahci; |
| dc->reset = pci_ich9_reset; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| } |
| |
| static const TypeInfo ich_ahci_info = { |
| .name = TYPE_ICH9_AHCI, |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(AHCIPCIState), |
| .instance_init = pci_ich9_ahci_init, |
| .class_init = ich_ahci_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static void ich_ahci_register_types(void) |
| { |
| type_register_static(&ich_ahci_info); |
| } |
| |
| type_init(ich_ahci_register_types) |