| /* |
| * TI ADS7846 / TSC2046 chip emulation. |
| * |
| * Copyright (c) 2006 Openedhand Ltd. |
| * Written by Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This code is licensed under the GNU GPL v2. |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| */ |
| |
| #include "ssi.h" |
| #include "ui/console.h" |
| |
| typedef struct { |
| SSISlave ssidev; |
| qemu_irq interrupt; |
| |
| int input[8]; |
| int pressure; |
| int noise; |
| |
| int cycle; |
| int output; |
| } ADS7846State; |
| |
| /* Control-byte bitfields */ |
| #define CB_PD0 (1 << 0) |
| #define CB_PD1 (1 << 1) |
| #define CB_SER (1 << 2) |
| #define CB_MODE (1 << 3) |
| #define CB_A0 (1 << 4) |
| #define CB_A1 (1 << 5) |
| #define CB_A2 (1 << 6) |
| #define CB_START (1 << 7) |
| |
| #define X_AXIS_DMAX 3470 |
| #define X_AXIS_MIN 290 |
| #define Y_AXIS_DMAX 3450 |
| #define Y_AXIS_MIN 200 |
| |
| #define ADS_VBAT 2000 |
| #define ADS_VAUX 2000 |
| #define ADS_TEMP0 2000 |
| #define ADS_TEMP1 3000 |
| #define ADS_XPOS(x, y) (X_AXIS_MIN + ((X_AXIS_DMAX * (x)) >> 15)) |
| #define ADS_YPOS(x, y) (Y_AXIS_MIN + ((Y_AXIS_DMAX * (y)) >> 15)) |
| #define ADS_Z1POS(x, y) 600 |
| #define ADS_Z2POS(x, y) (600 + 6000 / ADS_XPOS(x, y)) |
| |
| static void ads7846_int_update(ADS7846State *s) |
| { |
| if (s->interrupt) |
| qemu_set_irq(s->interrupt, s->pressure == 0); |
| } |
| |
| static uint32_t ads7846_transfer(SSISlave *dev, uint32_t value) |
| { |
| ADS7846State *s = FROM_SSI_SLAVE(ADS7846State, dev); |
| |
| switch (s->cycle ++) { |
| case 0: |
| if (!(value & CB_START)) { |
| s->cycle = 0; |
| break; |
| } |
| |
| s->output = s->input[(value >> 4) & 7]; |
| |
| /* Imitate the ADC noise, some drivers expect this. */ |
| s->noise = (s->noise + 3) & 7; |
| switch ((value >> 4) & 7) { |
| case 1: s->output += s->noise ^ 2; break; |
| case 3: s->output += s->noise ^ 0; break; |
| case 4: s->output += s->noise ^ 7; break; |
| case 5: s->output += s->noise ^ 5; break; |
| } |
| |
| if (value & CB_MODE) |
| s->output >>= 4; /* 8 bits instead of 12 */ |
| |
| break; |
| case 1: |
| s->cycle = 0; |
| break; |
| } |
| return s->output; |
| } |
| |
| static void ads7846_ts_event(void *opaque, |
| int x, int y, int z, int buttons_state) |
| { |
| ADS7846State *s = opaque; |
| |
| if (buttons_state) { |
| x = 0x7fff - x; |
| s->input[1] = ADS_XPOS(x, y); |
| s->input[3] = ADS_Z1POS(x, y); |
| s->input[4] = ADS_Z2POS(x, y); |
| s->input[5] = ADS_YPOS(x, y); |
| } |
| |
| if (s->pressure == !buttons_state) { |
| s->pressure = !!buttons_state; |
| |
| ads7846_int_update(s); |
| } |
| } |
| |
| static int ads7856_post_load(void *opaque, int version_id) |
| { |
| ADS7846State *s = opaque; |
| |
| s->pressure = 0; |
| ads7846_int_update(s); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_ads7846 = { |
| .name = "ads7846", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .post_load = ads7856_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_SSI_SLAVE(ssidev, ADS7846State), |
| VMSTATE_INT32_ARRAY(input, ADS7846State, 8), |
| VMSTATE_INT32(noise, ADS7846State), |
| VMSTATE_INT32(cycle, ADS7846State), |
| VMSTATE_INT32(output, ADS7846State), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static int ads7846_init(SSISlave *dev) |
| { |
| ADS7846State *s = FROM_SSI_SLAVE(ADS7846State, dev); |
| |
| qdev_init_gpio_out(&dev->qdev, &s->interrupt, 1); |
| |
| s->input[0] = ADS_TEMP0; /* TEMP0 */ |
| s->input[2] = ADS_VBAT; /* VBAT */ |
| s->input[6] = ADS_VAUX; /* VAUX */ |
| s->input[7] = ADS_TEMP1; /* TEMP1 */ |
| |
| /* We want absolute coordinates */ |
| qemu_add_mouse_event_handler(ads7846_ts_event, s, 1, |
| "QEMU ADS7846-driven Touchscreen"); |
| |
| ads7846_int_update(s); |
| |
| vmstate_register(NULL, -1, &vmstate_ads7846, s); |
| return 0; |
| } |
| |
| static void ads7846_class_init(ObjectClass *klass, void *data) |
| { |
| SSISlaveClass *k = SSI_SLAVE_CLASS(klass); |
| |
| k->init = ads7846_init; |
| k->transfer = ads7846_transfer; |
| } |
| |
| static const TypeInfo ads7846_info = { |
| .name = "ads7846", |
| .parent = TYPE_SSI_SLAVE, |
| .instance_size = sizeof(ADS7846State), |
| .class_init = ads7846_class_init, |
| }; |
| |
| static void ads7846_register_types(void) |
| { |
| type_register_static(&ads7846_info); |
| } |
| |
| type_init(ads7846_register_types) |