| /* |
| * qemu user cpu loop |
| * |
| * Copyright (c) 2003-2008 Fabrice Bellard |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu-common.h" |
| #include "qemu.h" |
| #include "user-internals.h" |
| #include "cpu_loop-common.h" |
| #include "signal-common.h" |
| |
| void cpu_loop(CPUM68KState *env) |
| { |
| CPUState *cs = env_cpu(env); |
| int trapnr; |
| unsigned int n; |
| target_siginfo_t info; |
| |
| for(;;) { |
| cpu_exec_start(cs); |
| trapnr = cpu_exec(cs); |
| cpu_exec_end(cs); |
| process_queued_cpu_work(cs); |
| |
| switch(trapnr) { |
| case EXCP_HALT_INSN: |
| /* Semihosing syscall. */ |
| env->pc += 4; |
| do_m68k_semihosting(env, env->dregs[0]); |
| break; |
| case EXCP_ILLEGAL: |
| case EXCP_LINEA: |
| case EXCP_LINEF: |
| info.si_signo = TARGET_SIGILL; |
| info.si_errno = 0; |
| info.si_code = TARGET_ILL_ILLOPN; |
| info._sifields._sigfault._addr = env->pc; |
| queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); |
| break; |
| case EXCP_CHK: |
| info.si_signo = TARGET_SIGFPE; |
| info.si_errno = 0; |
| info.si_code = TARGET_FPE_INTOVF; |
| info._sifields._sigfault._addr = env->pc; |
| queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); |
| break; |
| case EXCP_DIV0: |
| info.si_signo = TARGET_SIGFPE; |
| info.si_errno = 0; |
| info.si_code = TARGET_FPE_INTDIV; |
| info._sifields._sigfault._addr = env->pc; |
| queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); |
| break; |
| case EXCP_TRAP0: |
| { |
| abi_long ret; |
| n = env->dregs[0]; |
| env->pc += 2; |
| ret = do_syscall(env, |
| n, |
| env->dregs[1], |
| env->dregs[2], |
| env->dregs[3], |
| env->dregs[4], |
| env->dregs[5], |
| env->aregs[0], |
| 0, 0); |
| if (ret == -TARGET_ERESTARTSYS) { |
| env->pc -= 2; |
| } else if (ret != -TARGET_QEMU_ESIGRETURN) { |
| env->dregs[0] = ret; |
| } |
| } |
| break; |
| case EXCP_INTERRUPT: |
| /* just indicate that signals should be handled asap */ |
| break; |
| case EXCP_ACCESS: |
| { |
| info.si_signo = TARGET_SIGSEGV; |
| info.si_errno = 0; |
| /* XXX: check env->error_code */ |
| info.si_code = TARGET_SEGV_MAPERR; |
| info._sifields._sigfault._addr = env->mmu.ar; |
| queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); |
| } |
| break; |
| case EXCP_DEBUG: |
| info.si_signo = TARGET_SIGTRAP; |
| info.si_errno = 0; |
| info.si_code = TARGET_TRAP_BRKPT; |
| queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info); |
| break; |
| case EXCP_ATOMIC: |
| cpu_exec_step_atomic(cs); |
| break; |
| default: |
| EXCP_DUMP(env, "qemu: unhandled CPU exception 0x%x - aborting\n", trapnr); |
| abort(); |
| } |
| process_pending_signals(env); |
| } |
| } |
| |
| void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) |
| { |
| CPUState *cpu = env_cpu(env); |
| TaskState *ts = cpu->opaque; |
| struct image_info *info = ts->info; |
| |
| env->pc = regs->pc; |
| env->dregs[0] = regs->d0; |
| env->dregs[1] = regs->d1; |
| env->dregs[2] = regs->d2; |
| env->dregs[3] = regs->d3; |
| env->dregs[4] = regs->d4; |
| env->dregs[5] = regs->d5; |
| env->dregs[6] = regs->d6; |
| env->dregs[7] = regs->d7; |
| env->aregs[0] = regs->a0; |
| env->aregs[1] = regs->a1; |
| env->aregs[2] = regs->a2; |
| env->aregs[3] = regs->a3; |
| env->aregs[4] = regs->a4; |
| env->aregs[5] = regs->a5; |
| env->aregs[6] = regs->a6; |
| env->aregs[7] = regs->usp; |
| env->sr = regs->sr; |
| |
| ts->stack_base = info->start_stack; |
| ts->heap_base = info->brk; |
| /* This will be filled in on the first SYS_HEAPINFO call. */ |
| ts->heap_limit = 0; |
| } |