| # -*- Mode: Python -*- |
| # vim: filetype=python |
| # |
| |
| ## |
| # = Migration |
| ## |
| |
| { 'include': 'common.json' } |
| { 'include': 'sockets.json' } |
| |
| ## |
| # @MigrationStats: |
| # |
| # Detailed migration status. |
| # |
| # @transferred: amount of bytes already transferred to the target VM |
| # |
| # @remaining: amount of bytes remaining to be transferred to the target VM |
| # |
| # @total: total amount of bytes involved in the migration process |
| # |
| # @duplicate: number of duplicate (zero) pages (since 1.2) |
| # |
| # @skipped: number of skipped zero pages (since 1.5) |
| # |
| # @normal: number of normal pages (since 1.2) |
| # |
| # @normal-bytes: number of normal bytes sent (since 1.2) |
| # |
| # @dirty-pages-rate: number of pages dirtied by second by the |
| # guest (since 1.3) |
| # |
| # @mbps: throughput in megabits/sec. (since 1.6) |
| # |
| # @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1) |
| # |
| # @postcopy-requests: The number of page requests received from the destination |
| # (since 2.7) |
| # |
| # @page-size: The number of bytes per page for the various page-based |
| # statistics (since 2.10) |
| # |
| # @multifd-bytes: The number of bytes sent through multifd (since 3.0) |
| # |
| # @pages-per-second: the number of memory pages transferred per second |
| # (Since 4.0) |
| # |
| # @precopy-bytes: The number of bytes sent in the pre-copy phase |
| # (since 7.0). |
| # |
| # @downtime-bytes: The number of bytes sent while the guest is paused |
| # (since 7.0). |
| # |
| # @postcopy-bytes: The number of bytes sent during the post-copy phase |
| # (since 7.0). |
| # |
| # @dirty-sync-missed-zero-copy: Number of times dirty RAM synchronization could |
| # not avoid copying dirty pages. This is between |
| # 0 and @dirty-sync-count * @multifd-channels. |
| # (since 7.1) |
| # Since: 0.14 |
| ## |
| { 'struct': 'MigrationStats', |
| 'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' , |
| 'duplicate': 'int', 'skipped': 'int', 'normal': 'int', |
| 'normal-bytes': 'int', 'dirty-pages-rate' : 'int', |
| 'mbps' : 'number', 'dirty-sync-count' : 'int', |
| 'postcopy-requests' : 'int', 'page-size' : 'int', |
| 'multifd-bytes' : 'uint64', 'pages-per-second' : 'uint64', |
| 'precopy-bytes' : 'uint64', 'downtime-bytes' : 'uint64', |
| 'postcopy-bytes' : 'uint64', |
| 'dirty-sync-missed-zero-copy' : 'uint64' } } |
| |
| ## |
| # @XBZRLECacheStats: |
| # |
| # Detailed XBZRLE migration cache statistics |
| # |
| # @cache-size: XBZRLE cache size |
| # |
| # @bytes: amount of bytes already transferred to the target VM |
| # |
| # @pages: amount of pages transferred to the target VM |
| # |
| # @cache-miss: number of cache miss |
| # |
| # @cache-miss-rate: rate of cache miss (since 2.1) |
| # |
| # @encoding-rate: rate of encoded bytes (since 5.1) |
| # |
| # @overflow: number of overflows |
| # |
| # Since: 1.2 |
| ## |
| { 'struct': 'XBZRLECacheStats', |
| 'data': {'cache-size': 'size', 'bytes': 'int', 'pages': 'int', |
| 'cache-miss': 'int', 'cache-miss-rate': 'number', |
| 'encoding-rate': 'number', 'overflow': 'int' } } |
| |
| ## |
| # @CompressionStats: |
| # |
| # Detailed migration compression statistics |
| # |
| # @pages: amount of pages compressed and transferred to the target VM |
| # |
| # @busy: count of times that no free thread was available to compress data |
| # |
| # @busy-rate: rate of thread busy |
| # |
| # @compressed-size: amount of bytes after compression |
| # |
| # @compression-rate: rate of compressed size |
| # |
| # Since: 3.1 |
| ## |
| { 'struct': 'CompressionStats', |
| 'data': {'pages': 'int', 'busy': 'int', 'busy-rate': 'number', |
| 'compressed-size': 'int', 'compression-rate': 'number' } } |
| |
| ## |
| # @MigrationStatus: |
| # |
| # An enumeration of migration status. |
| # |
| # @none: no migration has ever happened. |
| # |
| # @setup: migration process has been initiated. |
| # |
| # @cancelling: in the process of cancelling migration. |
| # |
| # @cancelled: cancelling migration is finished. |
| # |
| # @active: in the process of doing migration. |
| # |
| # @postcopy-active: like active, but now in postcopy mode. (since 2.5) |
| # |
| # @postcopy-paused: during postcopy but paused. (since 3.0) |
| # |
| # @postcopy-recover: trying to recover from a paused postcopy. (since 3.0) |
| # |
| # @completed: migration is finished. |
| # |
| # @failed: some error occurred during migration process. |
| # |
| # @colo: VM is in the process of fault tolerance, VM can not get into this |
| # state unless colo capability is enabled for migration. (since 2.8) |
| # |
| # @pre-switchover: Paused before device serialisation. (since 2.11) |
| # |
| # @device: During device serialisation when pause-before-switchover is enabled |
| # (since 2.11) |
| # |
| # @wait-unplug: wait for device unplug request by guest OS to be completed. |
| # (since 4.2) |
| # |
| # Since: 2.3 |
| ## |
| { 'enum': 'MigrationStatus', |
| 'data': [ 'none', 'setup', 'cancelling', 'cancelled', |
| 'active', 'postcopy-active', 'postcopy-paused', |
| 'postcopy-recover', 'completed', 'failed', 'colo', |
| 'pre-switchover', 'device', 'wait-unplug' ] } |
| ## |
| # @VfioStats: |
| # |
| # Detailed VFIO devices migration statistics |
| # |
| # @transferred: amount of bytes transferred to the target VM by VFIO devices |
| # |
| # Since: 5.2 |
| ## |
| { 'struct': 'VfioStats', |
| 'data': {'transferred': 'int' } } |
| |
| ## |
| # @MigrationInfo: |
| # |
| # Information about current migration process. |
| # |
| # @status: @MigrationStatus describing the current migration status. |
| # If this field is not returned, no migration process |
| # has been initiated |
| # |
| # @ram: @MigrationStats containing detailed migration |
| # status, only returned if status is 'active' or |
| # 'completed'(since 1.2) |
| # |
| # @disk: @MigrationStats containing detailed disk migration |
| # status, only returned if status is 'active' and it is a block |
| # migration |
| # |
| # @xbzrle-cache: @XBZRLECacheStats containing detailed XBZRLE |
| # migration statistics, only returned if XBZRLE feature is on and |
| # status is 'active' or 'completed' (since 1.2) |
| # |
| # @total-time: total amount of milliseconds since migration started. |
| # If migration has ended, it returns the total migration |
| # time. (since 1.2) |
| # |
| # @downtime: only present when migration finishes correctly |
| # total downtime in milliseconds for the guest. |
| # (since 1.3) |
| # |
| # @expected-downtime: only present while migration is active |
| # expected downtime in milliseconds for the guest in last walk |
| # of the dirty bitmap. (since 1.3) |
| # |
| # @setup-time: amount of setup time in milliseconds *before* the |
| # iterations begin but *after* the QMP command is issued. This is designed |
| # to provide an accounting of any activities (such as RDMA pinning) which |
| # may be expensive, but do not actually occur during the iterative |
| # migration rounds themselves. (since 1.6) |
| # |
| # @cpu-throttle-percentage: percentage of time guest cpus are being |
| # throttled during auto-converge. This is only present when auto-converge |
| # has started throttling guest cpus. (Since 2.7) |
| # |
| # @error-desc: the human readable error description string, when |
| # @status is 'failed'. Clients should not attempt to parse the |
| # error strings. (Since 2.7) |
| # |
| # @postcopy-blocktime: total time when all vCPU were blocked during postcopy |
| # live migration. This is only present when the postcopy-blocktime |
| # migration capability is enabled. (Since 3.0) |
| # |
| # @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU. This is |
| # only present when the postcopy-blocktime migration capability |
| # is enabled. (Since 3.0) |
| # |
| # @compression: migration compression statistics, only returned if compression |
| # feature is on and status is 'active' or 'completed' (Since 3.1) |
| # |
| # @socket-address: Only used for tcp, to know what the real port is (Since 4.0) |
| # |
| # @vfio: @VfioStats containing detailed VFIO devices migration statistics, |
| # only returned if VFIO device is present, migration is supported by all |
| # VFIO devices and status is 'active' or 'completed' (since 5.2) |
| # |
| # @blocked-reasons: A list of reasons an outgoing migration is blocked. |
| # Present and non-empty when migration is blocked. |
| # (since 6.0) |
| # |
| # Since: 0.14 |
| ## |
| { 'struct': 'MigrationInfo', |
| 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats', |
| '*disk': 'MigrationStats', |
| '*vfio': 'VfioStats', |
| '*xbzrle-cache': 'XBZRLECacheStats', |
| '*total-time': 'int', |
| '*expected-downtime': 'int', |
| '*downtime': 'int', |
| '*setup-time': 'int', |
| '*cpu-throttle-percentage': 'int', |
| '*error-desc': 'str', |
| '*blocked-reasons': ['str'], |
| '*postcopy-blocktime' : 'uint32', |
| '*postcopy-vcpu-blocktime': ['uint32'], |
| '*compression': 'CompressionStats', |
| '*socket-address': ['SocketAddress'] } } |
| |
| ## |
| # @query-migrate: |
| # |
| # Returns information about current migration process. If migration |
| # is active there will be another json-object with RAM migration |
| # status and if block migration is active another one with block |
| # migration status. |
| # |
| # Returns: @MigrationInfo |
| # |
| # Since: 0.14 |
| # |
| # Example: |
| # |
| # 1. Before the first migration |
| # |
| # -> { "execute": "query-migrate" } |
| # <- { "return": {} } |
| # |
| # 2. Migration is done and has succeeded |
| # |
| # -> { "execute": "query-migrate" } |
| # <- { "return": { |
| # "status": "completed", |
| # "total-time":12345, |
| # "setup-time":12345, |
| # "downtime":12345, |
| # "ram":{ |
| # "transferred":123, |
| # "remaining":123, |
| # "total":246, |
| # "duplicate":123, |
| # "normal":123, |
| # "normal-bytes":123456, |
| # "dirty-sync-count":15 |
| # } |
| # } |
| # } |
| # |
| # 3. Migration is done and has failed |
| # |
| # -> { "execute": "query-migrate" } |
| # <- { "return": { "status": "failed" } } |
| # |
| # 4. Migration is being performed and is not a block migration: |
| # |
| # -> { "execute": "query-migrate" } |
| # <- { |
| # "return":{ |
| # "status":"active", |
| # "total-time":12345, |
| # "setup-time":12345, |
| # "expected-downtime":12345, |
| # "ram":{ |
| # "transferred":123, |
| # "remaining":123, |
| # "total":246, |
| # "duplicate":123, |
| # "normal":123, |
| # "normal-bytes":123456, |
| # "dirty-sync-count":15 |
| # } |
| # } |
| # } |
| # |
| # 5. Migration is being performed and is a block migration: |
| # |
| # -> { "execute": "query-migrate" } |
| # <- { |
| # "return":{ |
| # "status":"active", |
| # "total-time":12345, |
| # "setup-time":12345, |
| # "expected-downtime":12345, |
| # "ram":{ |
| # "total":1057024, |
| # "remaining":1053304, |
| # "transferred":3720, |
| # "duplicate":123, |
| # "normal":123, |
| # "normal-bytes":123456, |
| # "dirty-sync-count":15 |
| # }, |
| # "disk":{ |
| # "total":20971520, |
| # "remaining":20880384, |
| # "transferred":91136 |
| # } |
| # } |
| # } |
| # |
| # 6. Migration is being performed and XBZRLE is active: |
| # |
| # -> { "execute": "query-migrate" } |
| # <- { |
| # "return":{ |
| # "status":"active", |
| # "total-time":12345, |
| # "setup-time":12345, |
| # "expected-downtime":12345, |
| # "ram":{ |
| # "total":1057024, |
| # "remaining":1053304, |
| # "transferred":3720, |
| # "duplicate":10, |
| # "normal":3333, |
| # "normal-bytes":3412992, |
| # "dirty-sync-count":15 |
| # }, |
| # "xbzrle-cache":{ |
| # "cache-size":67108864, |
| # "bytes":20971520, |
| # "pages":2444343, |
| # "cache-miss":2244, |
| # "cache-miss-rate":0.123, |
| # "encoding-rate":80.1, |
| # "overflow":34434 |
| # } |
| # } |
| # } |
| # |
| ## |
| { 'command': 'query-migrate', 'returns': 'MigrationInfo' } |
| |
| ## |
| # @MigrationCapability: |
| # |
| # Migration capabilities enumeration |
| # |
| # @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length Encoding). |
| # This feature allows us to minimize migration traffic for certain work |
| # loads, by sending compressed difference of the pages |
| # |
| # @rdma-pin-all: Controls whether or not the entire VM memory footprint is |
| # mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage. |
| # Disabled by default. (since 2.0) |
| # |
| # @zero-blocks: During storage migration encode blocks of zeroes efficiently. This |
| # essentially saves 1MB of zeroes per block on the wire. Enabling requires |
| # source and target VM to support this feature. To enable it is sufficient |
| # to enable the capability on the source VM. The feature is disabled by |
| # default. (since 1.6) |
| # |
| # @compress: Use multiple compression threads to accelerate live migration. |
| # This feature can help to reduce the migration traffic, by sending |
| # compressed pages. Please note that if compress and xbzrle are both |
| # on, compress only takes effect in the ram bulk stage, after that, |
| # it will be disabled and only xbzrle takes effect, this can help to |
| # minimize migration traffic. The feature is disabled by default. |
| # (since 2.4 ) |
| # |
| # @events: generate events for each migration state change |
| # (since 2.4 ) |
| # |
| # @auto-converge: If enabled, QEMU will automatically throttle down the guest |
| # to speed up convergence of RAM migration. (since 1.6) |
| # |
| # @postcopy-ram: Start executing on the migration target before all of RAM has |
| # been migrated, pulling the remaining pages along as needed. The |
| # capacity must have the same setting on both source and target |
| # or migration will not even start. NOTE: If the migration fails during |
| # postcopy the VM will fail. (since 2.6) |
| # |
| # @x-colo: If enabled, migration will never end, and the state of the VM on the |
| # primary side will be migrated continuously to the VM on secondary |
| # side, this process is called COarse-Grain LOck Stepping (COLO) for |
| # Non-stop Service. (since 2.8) |
| # |
| # @release-ram: if enabled, qemu will free the migrated ram pages on the source |
| # during postcopy-ram migration. (since 2.9) |
| # |
| # @block: If enabled, QEMU will also migrate the contents of all block |
| # devices. Default is disabled. A possible alternative uses |
| # mirror jobs to a builtin NBD server on the destination, which |
| # offers more flexibility. |
| # (Since 2.10) |
| # |
| # @return-path: If enabled, migration will use the return path even |
| # for precopy. (since 2.10) |
| # |
| # @pause-before-switchover: Pause outgoing migration before serialising device |
| # state and before disabling block IO (since 2.11) |
| # |
| # @multifd: Use more than one fd for migration (since 4.0) |
| # |
| # @dirty-bitmaps: If enabled, QEMU will migrate named dirty bitmaps. |
| # (since 2.12) |
| # |
| # @postcopy-blocktime: Calculate downtime for postcopy live migration |
| # (since 3.0) |
| # |
| # @late-block-activate: If enabled, the destination will not activate block |
| # devices (and thus take locks) immediately at the end of migration. |
| # (since 3.0) |
| # |
| # @x-ignore-shared: If enabled, QEMU will not migrate shared memory (since 4.0) |
| # |
| # @validate-uuid: Send the UUID of the source to allow the destination |
| # to ensure it is the same. (since 4.2) |
| # |
| # @background-snapshot: If enabled, the migration stream will be a snapshot |
| # of the VM exactly at the point when the migration |
| # procedure starts. The VM RAM is saved with running VM. |
| # (since 6.0) |
| # |
| # @zero-copy-send: Controls behavior on sending memory pages on migration. |
| # When true, enables a zero-copy mechanism for sending |
| # memory pages, if host supports it. |
| # Requires that QEMU be permitted to use locked memory |
| # for guest RAM pages. |
| # (since 7.1) |
| # @postcopy-preempt: If enabled, the migration process will allow postcopy |
| # requests to preempt precopy stream, so postcopy requests |
| # will be handled faster. This is a performance feature and |
| # should not affect the correctness of postcopy migration. |
| # (since 7.1) |
| # |
| # Features: |
| # @unstable: Members @x-colo and @x-ignore-shared are experimental. |
| # |
| # Since: 1.2 |
| ## |
| { 'enum': 'MigrationCapability', |
| 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks', |
| 'compress', 'events', 'postcopy-ram', |
| { 'name': 'x-colo', 'features': [ 'unstable' ] }, |
| 'release-ram', |
| 'block', 'return-path', 'pause-before-switchover', 'multifd', |
| 'dirty-bitmaps', 'postcopy-blocktime', 'late-block-activate', |
| { 'name': 'x-ignore-shared', 'features': [ 'unstable' ] }, |
| 'validate-uuid', 'background-snapshot', |
| 'zero-copy-send', 'postcopy-preempt'] } |
| |
| ## |
| # @MigrationCapabilityStatus: |
| # |
| # Migration capability information |
| # |
| # @capability: capability enum |
| # |
| # @state: capability state bool |
| # |
| # Since: 1.2 |
| ## |
| { 'struct': 'MigrationCapabilityStatus', |
| 'data': { 'capability' : 'MigrationCapability', 'state' : 'bool' } } |
| |
| ## |
| # @migrate-set-capabilities: |
| # |
| # Enable/Disable the following migration capabilities (like xbzrle) |
| # |
| # @capabilities: json array of capability modifications to make |
| # |
| # Since: 1.2 |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate-set-capabilities" , "arguments": |
| # { "capabilities": [ { "capability": "xbzrle", "state": true } ] } } |
| # |
| ## |
| { 'command': 'migrate-set-capabilities', |
| 'data': { 'capabilities': ['MigrationCapabilityStatus'] } } |
| |
| ## |
| # @query-migrate-capabilities: |
| # |
| # Returns information about the current migration capabilities status |
| # |
| # Returns: @MigrationCapabilitiesStatus |
| # |
| # Since: 1.2 |
| # |
| # Example: |
| # |
| # -> { "execute": "query-migrate-capabilities" } |
| # <- { "return": [ |
| # {"state": false, "capability": "xbzrle"}, |
| # {"state": false, "capability": "rdma-pin-all"}, |
| # {"state": false, "capability": "auto-converge"}, |
| # {"state": false, "capability": "zero-blocks"}, |
| # {"state": false, "capability": "compress"}, |
| # {"state": true, "capability": "events"}, |
| # {"state": false, "capability": "postcopy-ram"}, |
| # {"state": false, "capability": "x-colo"} |
| # ]} |
| # |
| ## |
| { 'command': 'query-migrate-capabilities', 'returns': ['MigrationCapabilityStatus']} |
| |
| ## |
| # @MultiFDCompression: |
| # |
| # An enumeration of multifd compression methods. |
| # |
| # @none: no compression. |
| # @zlib: use zlib compression method. |
| # @zstd: use zstd compression method. |
| # |
| # Since: 5.0 |
| ## |
| { 'enum': 'MultiFDCompression', |
| 'data': [ 'none', 'zlib', |
| { 'name': 'zstd', 'if': 'CONFIG_ZSTD' } ] } |
| |
| ## |
| # @BitmapMigrationBitmapAliasTransform: |
| # |
| # @persistent: If present, the bitmap will be made persistent |
| # or transient depending on this parameter. |
| # |
| # Since: 6.0 |
| ## |
| { 'struct': 'BitmapMigrationBitmapAliasTransform', |
| 'data': { |
| '*persistent': 'bool' |
| } } |
| |
| ## |
| # @BitmapMigrationBitmapAlias: |
| # |
| # @name: The name of the bitmap. |
| # |
| # @alias: An alias name for migration (for example the bitmap name on |
| # the opposite site). |
| # |
| # @transform: Allows the modification of the migrated bitmap. |
| # (since 6.0) |
| # |
| # Since: 5.2 |
| ## |
| { 'struct': 'BitmapMigrationBitmapAlias', |
| 'data': { |
| 'name': 'str', |
| 'alias': 'str', |
| '*transform': 'BitmapMigrationBitmapAliasTransform' |
| } } |
| |
| ## |
| # @BitmapMigrationNodeAlias: |
| # |
| # Maps a block node name and the bitmaps it has to aliases for dirty |
| # bitmap migration. |
| # |
| # @node-name: A block node name. |
| # |
| # @alias: An alias block node name for migration (for example the |
| # node name on the opposite site). |
| # |
| # @bitmaps: Mappings for the bitmaps on this node. |
| # |
| # Since: 5.2 |
| ## |
| { 'struct': 'BitmapMigrationNodeAlias', |
| 'data': { |
| 'node-name': 'str', |
| 'alias': 'str', |
| 'bitmaps': [ 'BitmapMigrationBitmapAlias' ] |
| } } |
| |
| ## |
| # @MigrationParameter: |
| # |
| # Migration parameters enumeration |
| # |
| # @announce-initial: Initial delay (in milliseconds) before sending the first |
| # announce (Since 4.0) |
| # |
| # @announce-max: Maximum delay (in milliseconds) between packets in the |
| # announcement (Since 4.0) |
| # |
| # @announce-rounds: Number of self-announce packets sent after migration |
| # (Since 4.0) |
| # |
| # @announce-step: Increase in delay (in milliseconds) between subsequent |
| # packets in the announcement (Since 4.0) |
| # |
| # @compress-level: Set the compression level to be used in live migration, |
| # the compression level is an integer between 0 and 9, where 0 means |
| # no compression, 1 means the best compression speed, and 9 means best |
| # compression ratio which will consume more CPU. |
| # |
| # @compress-threads: Set compression thread count to be used in live migration, |
| # the compression thread count is an integer between 1 and 255. |
| # |
| # @compress-wait-thread: Controls behavior when all compression threads are |
| # currently busy. If true (default), wait for a free |
| # compression thread to become available; otherwise, |
| # send the page uncompressed. (Since 3.1) |
| # |
| # @decompress-threads: Set decompression thread count to be used in live |
| # migration, the decompression thread count is an integer between 1 |
| # and 255. Usually, decompression is at least 4 times as fast as |
| # compression, so set the decompress-threads to the number about 1/4 |
| # of compress-threads is adequate. |
| # |
| # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period |
| # to trigger throttling. It is expressed as percentage. |
| # The default value is 50. (Since 5.0) |
| # |
| # @cpu-throttle-initial: Initial percentage of time guest cpus are throttled |
| # when migration auto-converge is activated. The |
| # default value is 20. (Since 2.7) |
| # |
| # @cpu-throttle-increment: throttle percentage increase each time |
| # auto-converge detects that migration is not making |
| # progress. The default value is 10. (Since 2.7) |
| # |
| # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage |
| # At the tail stage of throttling, the Guest is very |
| # sensitive to CPU percentage while the @cpu-throttle |
| # -increment is excessive usually at tail stage. |
| # If this parameter is true, we will compute the ideal |
| # CPU percentage used by the Guest, which may exactly make |
| # the dirty rate match the dirty rate threshold. Then we |
| # will choose a smaller throttle increment between the |
| # one specified by @cpu-throttle-increment and the one |
| # generated by ideal CPU percentage. |
| # Therefore, it is compatible to traditional throttling, |
| # meanwhile the throttle increment won't be excessive |
| # at tail stage. |
| # The default value is false. (Since 5.1) |
| # |
| # @tls-creds: ID of the 'tls-creds' object that provides credentials for |
| # establishing a TLS connection over the migration data channel. |
| # On the outgoing side of the migration, the credentials must |
| # be for a 'client' endpoint, while for the incoming side the |
| # credentials must be for a 'server' endpoint. Setting this |
| # will enable TLS for all migrations. The default is unset, |
| # resulting in unsecured migration at the QEMU level. (Since 2.7) |
| # |
| # @tls-hostname: hostname of the target host for the migration. This is |
| # required when using x509 based TLS credentials and the |
| # migration URI does not already include a hostname. For |
| # example if using fd: or exec: based migration, the |
| # hostname must be provided so that the server's x509 |
| # certificate identity can be validated. (Since 2.7) |
| # |
| # @tls-authz: ID of the 'authz' object subclass that provides access control |
| # checking of the TLS x509 certificate distinguished name. |
| # This object is only resolved at time of use, so can be deleted |
| # and recreated on the fly while the migration server is active. |
| # If missing, it will default to denying access (Since 4.0) |
| # |
| # @max-bandwidth: to set maximum speed for migration. maximum speed in |
| # bytes per second. (Since 2.8) |
| # |
| # @downtime-limit: set maximum tolerated downtime for migration. maximum |
| # downtime in milliseconds (Since 2.8) |
| # |
| # @x-checkpoint-delay: The delay time (in ms) between two COLO checkpoints in |
| # periodic mode. (Since 2.8) |
| # |
| # @block-incremental: Affects how much storage is migrated when the |
| # block migration capability is enabled. When false, the entire |
| # storage backing chain is migrated into a flattened image at |
| # the destination; when true, only the active qcow2 layer is |
| # migrated and the destination must already have access to the |
| # same backing chain as was used on the source. (since 2.10) |
| # |
| # @multifd-channels: Number of channels used to migrate data in |
| # parallel. This is the same number that the |
| # number of sockets used for migration. The |
| # default value is 2 (since 4.0) |
| # |
| # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It |
| # needs to be a multiple of the target page size |
| # and a power of 2 |
| # (Since 2.11) |
| # |
| # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy. |
| # Defaults to 0 (unlimited). In bytes per second. |
| # (Since 3.0) |
| # |
| # @max-cpu-throttle: maximum cpu throttle percentage. |
| # Defaults to 99. (Since 3.1) |
| # |
| # @multifd-compression: Which compression method to use. |
| # Defaults to none. (Since 5.0) |
| # |
| # @multifd-zlib-level: Set the compression level to be used in live |
| # migration, the compression level is an integer between 0 |
| # and 9, where 0 means no compression, 1 means the best |
| # compression speed, and 9 means best compression ratio which |
| # will consume more CPU. |
| # Defaults to 1. (Since 5.0) |
| # |
| # @multifd-zstd-level: Set the compression level to be used in live |
| # migration, the compression level is an integer between 0 |
| # and 20, where 0 means no compression, 1 means the best |
| # compression speed, and 20 means best compression ratio which |
| # will consume more CPU. |
| # Defaults to 1. (Since 5.0) |
| # |
| # |
| # @block-bitmap-mapping: Maps block nodes and bitmaps on them to |
| # aliases for the purpose of dirty bitmap migration. Such |
| # aliases may for example be the corresponding names on the |
| # opposite site. |
| # The mapping must be one-to-one, but not necessarily |
| # complete: On the source, unmapped bitmaps and all bitmaps |
| # on unmapped nodes will be ignored. On the destination, |
| # encountering an unmapped alias in the incoming migration |
| # stream will result in a report, and all further bitmap |
| # migration data will then be discarded. |
| # Note that the destination does not know about bitmaps it |
| # does not receive, so there is no limitation or requirement |
| # regarding the number of bitmaps received, or how they are |
| # named, or on which nodes they are placed. |
| # By default (when this parameter has never been set), bitmap |
| # names are mapped to themselves. Nodes are mapped to their |
| # block device name if there is one, and to their node name |
| # otherwise. (Since 5.2) |
| # |
| # Features: |
| # @unstable: Member @x-checkpoint-delay is experimental. |
| # |
| # Since: 2.4 |
| ## |
| { 'enum': 'MigrationParameter', |
| 'data': ['announce-initial', 'announce-max', |
| 'announce-rounds', 'announce-step', |
| 'compress-level', 'compress-threads', 'decompress-threads', |
| 'compress-wait-thread', 'throttle-trigger-threshold', |
| 'cpu-throttle-initial', 'cpu-throttle-increment', |
| 'cpu-throttle-tailslow', |
| 'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth', |
| 'downtime-limit', |
| { 'name': 'x-checkpoint-delay', 'features': [ 'unstable' ] }, |
| 'block-incremental', |
| 'multifd-channels', |
| 'xbzrle-cache-size', 'max-postcopy-bandwidth', |
| 'max-cpu-throttle', 'multifd-compression', |
| 'multifd-zlib-level' ,'multifd-zstd-level', |
| 'block-bitmap-mapping' ] } |
| |
| ## |
| # @MigrateSetParameters: |
| # |
| # @announce-initial: Initial delay (in milliseconds) before sending the first |
| # announce (Since 4.0) |
| # |
| # @announce-max: Maximum delay (in milliseconds) between packets in the |
| # announcement (Since 4.0) |
| # |
| # @announce-rounds: Number of self-announce packets sent after migration |
| # (Since 4.0) |
| # |
| # @announce-step: Increase in delay (in milliseconds) between subsequent |
| # packets in the announcement (Since 4.0) |
| # |
| # @compress-level: compression level |
| # |
| # @compress-threads: compression thread count |
| # |
| # @compress-wait-thread: Controls behavior when all compression threads are |
| # currently busy. If true (default), wait for a free |
| # compression thread to become available; otherwise, |
| # send the page uncompressed. (Since 3.1) |
| # |
| # @decompress-threads: decompression thread count |
| # |
| # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period |
| # to trigger throttling. It is expressed as percentage. |
| # The default value is 50. (Since 5.0) |
| # |
| # @cpu-throttle-initial: Initial percentage of time guest cpus are |
| # throttled when migration auto-converge is activated. |
| # The default value is 20. (Since 2.7) |
| # |
| # @cpu-throttle-increment: throttle percentage increase each time |
| # auto-converge detects that migration is not making |
| # progress. The default value is 10. (Since 2.7) |
| # |
| # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage |
| # At the tail stage of throttling, the Guest is very |
| # sensitive to CPU percentage while the @cpu-throttle |
| # -increment is excessive usually at tail stage. |
| # If this parameter is true, we will compute the ideal |
| # CPU percentage used by the Guest, which may exactly make |
| # the dirty rate match the dirty rate threshold. Then we |
| # will choose a smaller throttle increment between the |
| # one specified by @cpu-throttle-increment and the one |
| # generated by ideal CPU percentage. |
| # Therefore, it is compatible to traditional throttling, |
| # meanwhile the throttle increment won't be excessive |
| # at tail stage. |
| # The default value is false. (Since 5.1) |
| # |
| # @tls-creds: ID of the 'tls-creds' object that provides credentials |
| # for establishing a TLS connection over the migration data |
| # channel. On the outgoing side of the migration, the credentials |
| # must be for a 'client' endpoint, while for the incoming side the |
| # credentials must be for a 'server' endpoint. Setting this |
| # to a non-empty string enables TLS for all migrations. |
| # An empty string means that QEMU will use plain text mode for |
| # migration, rather than TLS (Since 2.9) |
| # Previously (since 2.7), this was reported by omitting |
| # tls-creds instead. |
| # |
| # @tls-hostname: hostname of the target host for the migration. This |
| # is required when using x509 based TLS credentials and the |
| # migration URI does not already include a hostname. For |
| # example if using fd: or exec: based migration, the |
| # hostname must be provided so that the server's x509 |
| # certificate identity can be validated. (Since 2.7) |
| # An empty string means that QEMU will use the hostname |
| # associated with the migration URI, if any. (Since 2.9) |
| # Previously (since 2.7), this was reported by omitting |
| # tls-hostname instead. |
| # |
| # @max-bandwidth: to set maximum speed for migration. maximum speed in |
| # bytes per second. (Since 2.8) |
| # |
| # @downtime-limit: set maximum tolerated downtime for migration. maximum |
| # downtime in milliseconds (Since 2.8) |
| # |
| # @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.8) |
| # |
| # @block-incremental: Affects how much storage is migrated when the |
| # block migration capability is enabled. When false, the entire |
| # storage backing chain is migrated into a flattened image at |
| # the destination; when true, only the active qcow2 layer is |
| # migrated and the destination must already have access to the |
| # same backing chain as was used on the source. (since 2.10) |
| # |
| # @multifd-channels: Number of channels used to migrate data in |
| # parallel. This is the same number that the |
| # number of sockets used for migration. The |
| # default value is 2 (since 4.0) |
| # |
| # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It |
| # needs to be a multiple of the target page size |
| # and a power of 2 |
| # (Since 2.11) |
| # |
| # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy. |
| # Defaults to 0 (unlimited). In bytes per second. |
| # (Since 3.0) |
| # |
| # @max-cpu-throttle: maximum cpu throttle percentage. |
| # The default value is 99. (Since 3.1) |
| # |
| # @multifd-compression: Which compression method to use. |
| # Defaults to none. (Since 5.0) |
| # |
| # @multifd-zlib-level: Set the compression level to be used in live |
| # migration, the compression level is an integer between 0 |
| # and 9, where 0 means no compression, 1 means the best |
| # compression speed, and 9 means best compression ratio which |
| # will consume more CPU. |
| # Defaults to 1. (Since 5.0) |
| # |
| # @multifd-zstd-level: Set the compression level to be used in live |
| # migration, the compression level is an integer between 0 |
| # and 20, where 0 means no compression, 1 means the best |
| # compression speed, and 20 means best compression ratio which |
| # will consume more CPU. |
| # Defaults to 1. (Since 5.0) |
| # |
| # @block-bitmap-mapping: Maps block nodes and bitmaps on them to |
| # aliases for the purpose of dirty bitmap migration. Such |
| # aliases may for example be the corresponding names on the |
| # opposite site. |
| # The mapping must be one-to-one, but not necessarily |
| # complete: On the source, unmapped bitmaps and all bitmaps |
| # on unmapped nodes will be ignored. On the destination, |
| # encountering an unmapped alias in the incoming migration |
| # stream will result in a report, and all further bitmap |
| # migration data will then be discarded. |
| # Note that the destination does not know about bitmaps it |
| # does not receive, so there is no limitation or requirement |
| # regarding the number of bitmaps received, or how they are |
| # named, or on which nodes they are placed. |
| # By default (when this parameter has never been set), bitmap |
| # names are mapped to themselves. Nodes are mapped to their |
| # block device name if there is one, and to their node name |
| # otherwise. (Since 5.2) |
| # |
| # Features: |
| # @unstable: Member @x-checkpoint-delay is experimental. |
| # |
| # Since: 2.4 |
| ## |
| # TODO either fuse back into MigrationParameters, or make |
| # MigrationParameters members mandatory |
| { 'struct': 'MigrateSetParameters', |
| 'data': { '*announce-initial': 'size', |
| '*announce-max': 'size', |
| '*announce-rounds': 'size', |
| '*announce-step': 'size', |
| '*compress-level': 'uint8', |
| '*compress-threads': 'uint8', |
| '*compress-wait-thread': 'bool', |
| '*decompress-threads': 'uint8', |
| '*throttle-trigger-threshold': 'uint8', |
| '*cpu-throttle-initial': 'uint8', |
| '*cpu-throttle-increment': 'uint8', |
| '*cpu-throttle-tailslow': 'bool', |
| '*tls-creds': 'StrOrNull', |
| '*tls-hostname': 'StrOrNull', |
| '*tls-authz': 'StrOrNull', |
| '*max-bandwidth': 'size', |
| '*downtime-limit': 'uint64', |
| '*x-checkpoint-delay': { 'type': 'uint32', |
| 'features': [ 'unstable' ] }, |
| '*block-incremental': 'bool', |
| '*multifd-channels': 'uint8', |
| '*xbzrle-cache-size': 'size', |
| '*max-postcopy-bandwidth': 'size', |
| '*max-cpu-throttle': 'uint8', |
| '*multifd-compression': 'MultiFDCompression', |
| '*multifd-zlib-level': 'uint8', |
| '*multifd-zstd-level': 'uint8', |
| '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } } |
| |
| ## |
| # @migrate-set-parameters: |
| # |
| # Set various migration parameters. |
| # |
| # Since: 2.4 |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate-set-parameters" , |
| # "arguments": { "compress-level": 1 } } |
| # |
| ## |
| { 'command': 'migrate-set-parameters', 'boxed': true, |
| 'data': 'MigrateSetParameters' } |
| |
| ## |
| # @MigrationParameters: |
| # |
| # The optional members aren't actually optional. |
| # |
| # @announce-initial: Initial delay (in milliseconds) before sending the |
| # first announce (Since 4.0) |
| # |
| # @announce-max: Maximum delay (in milliseconds) between packets in the |
| # announcement (Since 4.0) |
| # |
| # @announce-rounds: Number of self-announce packets sent after migration |
| # (Since 4.0) |
| # |
| # @announce-step: Increase in delay (in milliseconds) between subsequent |
| # packets in the announcement (Since 4.0) |
| # |
| # @compress-level: compression level |
| # |
| # @compress-threads: compression thread count |
| # |
| # @compress-wait-thread: Controls behavior when all compression threads are |
| # currently busy. If true (default), wait for a free |
| # compression thread to become available; otherwise, |
| # send the page uncompressed. (Since 3.1) |
| # |
| # @decompress-threads: decompression thread count |
| # |
| # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period |
| # to trigger throttling. It is expressed as percentage. |
| # The default value is 50. (Since 5.0) |
| # |
| # @cpu-throttle-initial: Initial percentage of time guest cpus are |
| # throttled when migration auto-converge is activated. |
| # (Since 2.7) |
| # |
| # @cpu-throttle-increment: throttle percentage increase each time |
| # auto-converge detects that migration is not making |
| # progress. (Since 2.7) |
| # |
| # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage |
| # At the tail stage of throttling, the Guest is very |
| # sensitive to CPU percentage while the @cpu-throttle |
| # -increment is excessive usually at tail stage. |
| # If this parameter is true, we will compute the ideal |
| # CPU percentage used by the Guest, which may exactly make |
| # the dirty rate match the dirty rate threshold. Then we |
| # will choose a smaller throttle increment between the |
| # one specified by @cpu-throttle-increment and the one |
| # generated by ideal CPU percentage. |
| # Therefore, it is compatible to traditional throttling, |
| # meanwhile the throttle increment won't be excessive |
| # at tail stage. |
| # The default value is false. (Since 5.1) |
| # |
| # @tls-creds: ID of the 'tls-creds' object that provides credentials |
| # for establishing a TLS connection over the migration data |
| # channel. On the outgoing side of the migration, the credentials |
| # must be for a 'client' endpoint, while for the incoming side the |
| # credentials must be for a 'server' endpoint. |
| # An empty string means that QEMU will use plain text mode for |
| # migration, rather than TLS (Since 2.7) |
| # Note: 2.8 reports this by omitting tls-creds instead. |
| # |
| # @tls-hostname: hostname of the target host for the migration. This |
| # is required when using x509 based TLS credentials and the |
| # migration URI does not already include a hostname. For |
| # example if using fd: or exec: based migration, the |
| # hostname must be provided so that the server's x509 |
| # certificate identity can be validated. (Since 2.7) |
| # An empty string means that QEMU will use the hostname |
| # associated with the migration URI, if any. (Since 2.9) |
| # Note: 2.8 reports this by omitting tls-hostname instead. |
| # |
| # @tls-authz: ID of the 'authz' object subclass that provides access control |
| # checking of the TLS x509 certificate distinguished name. (Since |
| # 4.0) |
| # |
| # @max-bandwidth: to set maximum speed for migration. maximum speed in |
| # bytes per second. (Since 2.8) |
| # |
| # @downtime-limit: set maximum tolerated downtime for migration. maximum |
| # downtime in milliseconds (Since 2.8) |
| # |
| # @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.8) |
| # |
| # @block-incremental: Affects how much storage is migrated when the |
| # block migration capability is enabled. When false, the entire |
| # storage backing chain is migrated into a flattened image at |
| # the destination; when true, only the active qcow2 layer is |
| # migrated and the destination must already have access to the |
| # same backing chain as was used on the source. (since 2.10) |
| # |
| # @multifd-channels: Number of channels used to migrate data in |
| # parallel. This is the same number that the |
| # number of sockets used for migration. |
| # The default value is 2 (since 4.0) |
| # |
| # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It |
| # needs to be a multiple of the target page size |
| # and a power of 2 |
| # (Since 2.11) |
| # |
| # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy. |
| # Defaults to 0 (unlimited). In bytes per second. |
| # (Since 3.0) |
| # |
| # @max-cpu-throttle: maximum cpu throttle percentage. |
| # Defaults to 99. |
| # (Since 3.1) |
| # |
| # @multifd-compression: Which compression method to use. |
| # Defaults to none. (Since 5.0) |
| # |
| # @multifd-zlib-level: Set the compression level to be used in live |
| # migration, the compression level is an integer between 0 |
| # and 9, where 0 means no compression, 1 means the best |
| # compression speed, and 9 means best compression ratio which |
| # will consume more CPU. |
| # Defaults to 1. (Since 5.0) |
| # |
| # @multifd-zstd-level: Set the compression level to be used in live |
| # migration, the compression level is an integer between 0 |
| # and 20, where 0 means no compression, 1 means the best |
| # compression speed, and 20 means best compression ratio which |
| # will consume more CPU. |
| # Defaults to 1. (Since 5.0) |
| # |
| # @block-bitmap-mapping: Maps block nodes and bitmaps on them to |
| # aliases for the purpose of dirty bitmap migration. Such |
| # aliases may for example be the corresponding names on the |
| # opposite site. |
| # The mapping must be one-to-one, but not necessarily |
| # complete: On the source, unmapped bitmaps and all bitmaps |
| # on unmapped nodes will be ignored. On the destination, |
| # encountering an unmapped alias in the incoming migration |
| # stream will result in a report, and all further bitmap |
| # migration data will then be discarded. |
| # Note that the destination does not know about bitmaps it |
| # does not receive, so there is no limitation or requirement |
| # regarding the number of bitmaps received, or how they are |
| # named, or on which nodes they are placed. |
| # By default (when this parameter has never been set), bitmap |
| # names are mapped to themselves. Nodes are mapped to their |
| # block device name if there is one, and to their node name |
| # otherwise. (Since 5.2) |
| # |
| # Features: |
| # @unstable: Member @x-checkpoint-delay is experimental. |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'MigrationParameters', |
| 'data': { '*announce-initial': 'size', |
| '*announce-max': 'size', |
| '*announce-rounds': 'size', |
| '*announce-step': 'size', |
| '*compress-level': 'uint8', |
| '*compress-threads': 'uint8', |
| '*compress-wait-thread': 'bool', |
| '*decompress-threads': 'uint8', |
| '*throttle-trigger-threshold': 'uint8', |
| '*cpu-throttle-initial': 'uint8', |
| '*cpu-throttle-increment': 'uint8', |
| '*cpu-throttle-tailslow': 'bool', |
| '*tls-creds': 'str', |
| '*tls-hostname': 'str', |
| '*tls-authz': 'str', |
| '*max-bandwidth': 'size', |
| '*downtime-limit': 'uint64', |
| '*x-checkpoint-delay': { 'type': 'uint32', |
| 'features': [ 'unstable' ] }, |
| '*block-incremental': 'bool', |
| '*multifd-channels': 'uint8', |
| '*xbzrle-cache-size': 'size', |
| '*max-postcopy-bandwidth': 'size', |
| '*max-cpu-throttle': 'uint8', |
| '*multifd-compression': 'MultiFDCompression', |
| '*multifd-zlib-level': 'uint8', |
| '*multifd-zstd-level': 'uint8', |
| '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } } |
| |
| ## |
| # @query-migrate-parameters: |
| # |
| # Returns information about the current migration parameters |
| # |
| # Returns: @MigrationParameters |
| # |
| # Since: 2.4 |
| # |
| # Example: |
| # |
| # -> { "execute": "query-migrate-parameters" } |
| # <- { "return": { |
| # "decompress-threads": 2, |
| # "cpu-throttle-increment": 10, |
| # "compress-threads": 8, |
| # "compress-level": 1, |
| # "cpu-throttle-initial": 20, |
| # "max-bandwidth": 33554432, |
| # "downtime-limit": 300 |
| # } |
| # } |
| # |
| ## |
| { 'command': 'query-migrate-parameters', |
| 'returns': 'MigrationParameters' } |
| |
| ## |
| # @migrate-start-postcopy: |
| # |
| # Followup to a migration command to switch the migration to postcopy mode. |
| # The postcopy-ram capability must be set on both source and destination |
| # before the original migration command. |
| # |
| # Since: 2.5 |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate-start-postcopy" } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'migrate-start-postcopy' } |
| |
| ## |
| # @MIGRATION: |
| # |
| # Emitted when a migration event happens |
| # |
| # @status: @MigrationStatus describing the current migration status. |
| # |
| # Since: 2.4 |
| # |
| # Example: |
| # |
| # <- {"timestamp": {"seconds": 1432121972, "microseconds": 744001}, |
| # "event": "MIGRATION", |
| # "data": {"status": "completed"} } |
| # |
| ## |
| { 'event': 'MIGRATION', |
| 'data': {'status': 'MigrationStatus'}} |
| |
| ## |
| # @MIGRATION_PASS: |
| # |
| # Emitted from the source side of a migration at the start of each pass |
| # (when it syncs the dirty bitmap) |
| # |
| # @pass: An incrementing count (starting at 1 on the first pass) |
| # |
| # Since: 2.6 |
| # |
| # Example: |
| # |
| # { "timestamp": {"seconds": 1449669631, "microseconds": 239225}, |
| # "event": "MIGRATION_PASS", "data": {"pass": 2} } |
| # |
| ## |
| { 'event': 'MIGRATION_PASS', |
| 'data': { 'pass': 'int' } } |
| |
| ## |
| # @COLOMessage: |
| # |
| # The message transmission between Primary side and Secondary side. |
| # |
| # @checkpoint-ready: Secondary VM (SVM) is ready for checkpointing |
| # |
| # @checkpoint-request: Primary VM (PVM) tells SVM to prepare for checkpointing |
| # |
| # @checkpoint-reply: SVM gets PVM's checkpoint request |
| # |
| # @vmstate-send: VM's state will be sent by PVM. |
| # |
| # @vmstate-size: The total size of VMstate. |
| # |
| # @vmstate-received: VM's state has been received by SVM. |
| # |
| # @vmstate-loaded: VM's state has been loaded by SVM. |
| # |
| # Since: 2.8 |
| ## |
| { 'enum': 'COLOMessage', |
| 'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply', |
| 'vmstate-send', 'vmstate-size', 'vmstate-received', |
| 'vmstate-loaded' ] } |
| |
| ## |
| # @COLOMode: |
| # |
| # The COLO current mode. |
| # |
| # @none: COLO is disabled. |
| # |
| # @primary: COLO node in primary side. |
| # |
| # @secondary: COLO node in slave side. |
| # |
| # Since: 2.8 |
| ## |
| { 'enum': 'COLOMode', |
| 'data': [ 'none', 'primary', 'secondary'] } |
| |
| ## |
| # @FailoverStatus: |
| # |
| # An enumeration of COLO failover status |
| # |
| # @none: no failover has ever happened |
| # |
| # @require: got failover requirement but not handled |
| # |
| # @active: in the process of doing failover |
| # |
| # @completed: finish the process of failover |
| # |
| # @relaunch: restart the failover process, from 'none' -> 'completed' (Since 2.9) |
| # |
| # Since: 2.8 |
| ## |
| { 'enum': 'FailoverStatus', |
| 'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] } |
| |
| ## |
| # @COLO_EXIT: |
| # |
| # Emitted when VM finishes COLO mode due to some errors happening or |
| # at the request of users. |
| # |
| # @mode: report COLO mode when COLO exited. |
| # |
| # @reason: describes the reason for the COLO exit. |
| # |
| # Since: 3.1 |
| # |
| # Example: |
| # |
| # <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172}, |
| # "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } } |
| # |
| ## |
| { 'event': 'COLO_EXIT', |
| 'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } } |
| |
| ## |
| # @COLOExitReason: |
| # |
| # The reason for a COLO exit. |
| # |
| # @none: failover has never happened. This state does not occur |
| # in the COLO_EXIT event, and is only visible in the result of |
| # query-colo-status. |
| # |
| # @request: COLO exit is due to an external request. |
| # |
| # @error: COLO exit is due to an internal error. |
| # |
| # @processing: COLO is currently handling a failover (since 4.0). |
| # |
| # Since: 3.1 |
| ## |
| { 'enum': 'COLOExitReason', |
| 'data': [ 'none', 'request', 'error' , 'processing' ] } |
| |
| ## |
| # @x-colo-lost-heartbeat: |
| # |
| # Tell qemu that heartbeat is lost, request it to do takeover procedures. |
| # If this command is sent to the PVM, the Primary side will exit COLO mode. |
| # If sent to the Secondary, the Secondary side will run failover work, |
| # then takes over server operation to become the service VM. |
| # |
| # Features: |
| # @unstable: This command is experimental. |
| # |
| # Since: 2.8 |
| # |
| # Example: |
| # |
| # -> { "execute": "x-colo-lost-heartbeat" } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'x-colo-lost-heartbeat', |
| 'features': [ 'unstable' ] } |
| |
| ## |
| # @migrate_cancel: |
| # |
| # Cancel the current executing migration process. |
| # |
| # Returns: nothing on success |
| # |
| # Notes: This command succeeds even if there is no migration process running. |
| # |
| # Since: 0.14 |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate_cancel" } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'migrate_cancel' } |
| |
| ## |
| # @migrate-continue: |
| # |
| # Continue migration when it's in a paused state. |
| # |
| # @state: The state the migration is currently expected to be in |
| # |
| # Returns: nothing on success |
| # |
| # Since: 2.11 |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate-continue" , "arguments": |
| # { "state": "pre-switchover" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'migrate-continue', 'data': {'state': 'MigrationStatus'} } |
| |
| ## |
| # @migrate: |
| # |
| # Migrates the current running guest to another Virtual Machine. |
| # |
| # @uri: the Uniform Resource Identifier of the destination VM |
| # |
| # @blk: do block migration (full disk copy) |
| # |
| # @inc: incremental disk copy migration |
| # |
| # @detach: this argument exists only for compatibility reasons and |
| # is ignored by QEMU |
| # |
| # @resume: resume one paused migration, default "off". (since 3.0) |
| # |
| # Returns: nothing on success |
| # |
| # Since: 0.14 |
| # |
| # Notes: |
| # |
| # 1. The 'query-migrate' command should be used to check migration's progress |
| # and final result (this information is provided by the 'status' member) |
| # |
| # 2. All boolean arguments default to false |
| # |
| # 3. The user Monitor's "detach" argument is invalid in QMP and should not |
| # be used |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'migrate', |
| 'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool', |
| '*detach': 'bool', '*resume': 'bool' } } |
| |
| ## |
| # @migrate-incoming: |
| # |
| # Start an incoming migration, the qemu must have been started |
| # with -incoming defer |
| # |
| # @uri: The Uniform Resource Identifier identifying the source or |
| # address to listen on |
| # |
| # Returns: nothing on success |
| # |
| # Since: 2.3 |
| # |
| # Notes: |
| # |
| # 1. It's a bad idea to use a string for the uri, but it needs to stay |
| # compatible with -incoming and the format of the uri is already exposed |
| # above libvirt. |
| # |
| # 2. QEMU must be started with -incoming defer to allow migrate-incoming to |
| # be used. |
| # |
| # 3. The uri format is the same as for -incoming |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate-incoming", |
| # "arguments": { "uri": "tcp::4446" } } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'migrate-incoming', 'data': {'uri': 'str' } } |
| |
| ## |
| # @xen-save-devices-state: |
| # |
| # Save the state of all devices to file. The RAM and the block devices |
| # of the VM are not saved by this command. |
| # |
| # @filename: the file to save the state of the devices to as binary |
| # data. See xen-save-devices-state.txt for a description of the binary |
| # format. |
| # |
| # @live: Optional argument to ask QEMU to treat this command as part of a live |
| # migration. Default to true. (since 2.11) |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 1.1 |
| # |
| # Example: |
| # |
| # -> { "execute": "xen-save-devices-state", |
| # "arguments": { "filename": "/tmp/save" } } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'xen-save-devices-state', |
| 'data': {'filename': 'str', '*live':'bool' } } |
| |
| ## |
| # @xen-set-global-dirty-log: |
| # |
| # Enable or disable the global dirty log mode. |
| # |
| # @enable: true to enable, false to disable. |
| # |
| # Returns: nothing |
| # |
| # Since: 1.3 |
| # |
| # Example: |
| # |
| # -> { "execute": "xen-set-global-dirty-log", |
| # "arguments": { "enable": true } } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } } |
| |
| ## |
| # @xen-load-devices-state: |
| # |
| # Load the state of all devices from file. The RAM and the block devices |
| # of the VM are not loaded by this command. |
| # |
| # @filename: the file to load the state of the devices from as binary |
| # data. See xen-save-devices-state.txt for a description of the binary |
| # format. |
| # |
| # Since: 2.7 |
| # |
| # Example: |
| # |
| # -> { "execute": "xen-load-devices-state", |
| # "arguments": { "filename": "/tmp/resume" } } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} } |
| |
| ## |
| # @xen-set-replication: |
| # |
| # Enable or disable replication. |
| # |
| # @enable: true to enable, false to disable. |
| # |
| # @primary: true for primary or false for secondary. |
| # |
| # @failover: true to do failover, false to stop. but cannot be |
| # specified if 'enable' is true. default value is false. |
| # |
| # Returns: nothing. |
| # |
| # Example: |
| # |
| # -> { "execute": "xen-set-replication", |
| # "arguments": {"enable": true, "primary": false} } |
| # <- { "return": {} } |
| # |
| # Since: 2.9 |
| ## |
| { 'command': 'xen-set-replication', |
| 'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' }, |
| 'if': 'CONFIG_REPLICATION' } |
| |
| ## |
| # @ReplicationStatus: |
| # |
| # The result format for 'query-xen-replication-status'. |
| # |
| # @error: true if an error happened, false if replication is normal. |
| # |
| # @desc: the human readable error description string, when |
| # @error is 'true'. |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'ReplicationStatus', |
| 'data': { 'error': 'bool', '*desc': 'str' }, |
| 'if': 'CONFIG_REPLICATION' } |
| |
| ## |
| # @query-xen-replication-status: |
| # |
| # Query replication status while the vm is running. |
| # |
| # Returns: A @ReplicationStatus object showing the status. |
| # |
| # Example: |
| # |
| # -> { "execute": "query-xen-replication-status" } |
| # <- { "return": { "error": false } } |
| # |
| # Since: 2.9 |
| ## |
| { 'command': 'query-xen-replication-status', |
| 'returns': 'ReplicationStatus', |
| 'if': 'CONFIG_REPLICATION' } |
| |
| ## |
| # @xen-colo-do-checkpoint: |
| # |
| # Xen uses this command to notify replication to trigger a checkpoint. |
| # |
| # Returns: nothing. |
| # |
| # Example: |
| # |
| # -> { "execute": "xen-colo-do-checkpoint" } |
| # <- { "return": {} } |
| # |
| # Since: 2.9 |
| ## |
| { 'command': 'xen-colo-do-checkpoint', |
| 'if': 'CONFIG_REPLICATION' } |
| |
| ## |
| # @COLOStatus: |
| # |
| # The result format for 'query-colo-status'. |
| # |
| # @mode: COLO running mode. If COLO is running, this field will return |
| # 'primary' or 'secondary'. |
| # |
| # @last-mode: COLO last running mode. If COLO is running, this field |
| # will return same like mode field, after failover we can |
| # use this field to get last colo mode. (since 4.0) |
| # |
| # @reason: describes the reason for the COLO exit. |
| # |
| # Since: 3.1 |
| ## |
| { 'struct': 'COLOStatus', |
| 'data': { 'mode': 'COLOMode', 'last-mode': 'COLOMode', |
| 'reason': 'COLOExitReason' } } |
| |
| ## |
| # @query-colo-status: |
| # |
| # Query COLO status while the vm is running. |
| # |
| # Returns: A @COLOStatus object showing the status. |
| # |
| # Example: |
| # |
| # -> { "execute": "query-colo-status" } |
| # <- { "return": { "mode": "primary", "last-mode": "none", "reason": "request" } } |
| # |
| # Since: 3.1 |
| ## |
| { 'command': 'query-colo-status', |
| 'returns': 'COLOStatus' } |
| |
| ## |
| # @migrate-recover: |
| # |
| # Provide a recovery migration stream URI. |
| # |
| # @uri: the URI to be used for the recovery of migration stream. |
| # |
| # Returns: nothing. |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate-recover", |
| # "arguments": { "uri": "tcp:192.168.1.200:12345" } } |
| # <- { "return": {} } |
| # |
| # Since: 3.0 |
| ## |
| { 'command': 'migrate-recover', |
| 'data': { 'uri': 'str' }, |
| 'allow-oob': true } |
| |
| ## |
| # @migrate-pause: |
| # |
| # Pause a migration. Currently it only supports postcopy. |
| # |
| # Returns: nothing. |
| # |
| # Example: |
| # |
| # -> { "execute": "migrate-pause" } |
| # <- { "return": {} } |
| # |
| # Since: 3.0 |
| ## |
| { 'command': 'migrate-pause', 'allow-oob': true } |
| |
| ## |
| # @UNPLUG_PRIMARY: |
| # |
| # Emitted from source side of a migration when migration state is |
| # WAIT_UNPLUG. Device was unplugged by guest operating system. |
| # Device resources in QEMU are kept on standby to be able to re-plug it in case |
| # of migration failure. |
| # |
| # @device-id: QEMU device id of the unplugged device |
| # |
| # Since: 4.2 |
| # |
| # Example: |
| # |
| # <- { "event": "UNPLUG_PRIMARY", |
| # "data": { "device-id": "hostdev0" }, |
| # "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } |
| # |
| ## |
| { 'event': 'UNPLUG_PRIMARY', |
| 'data': { 'device-id': 'str' } } |
| |
| ## |
| # @DirtyRateVcpu: |
| # |
| # Dirty rate of vcpu. |
| # |
| # @id: vcpu index. |
| # |
| # @dirty-rate: dirty rate. |
| # |
| # Since: 6.2 |
| ## |
| { 'struct': 'DirtyRateVcpu', |
| 'data': { 'id': 'int', 'dirty-rate': 'int64' } } |
| |
| ## |
| # @DirtyRateStatus: |
| # |
| # An enumeration of dirtyrate status. |
| # |
| # @unstarted: the dirtyrate thread has not been started. |
| # |
| # @measuring: the dirtyrate thread is measuring. |
| # |
| # @measured: the dirtyrate thread has measured and results are available. |
| # |
| # Since: 5.2 |
| ## |
| { 'enum': 'DirtyRateStatus', |
| 'data': [ 'unstarted', 'measuring', 'measured'] } |
| |
| ## |
| # @DirtyRateMeasureMode: |
| # |
| # An enumeration of mode of measuring dirtyrate. |
| # |
| # @page-sampling: calculate dirtyrate by sampling pages. |
| # |
| # @dirty-ring: calculate dirtyrate by dirty ring. |
| # |
| # @dirty-bitmap: calculate dirtyrate by dirty bitmap. |
| # |
| # Since: 6.2 |
| ## |
| { 'enum': 'DirtyRateMeasureMode', |
| 'data': ['page-sampling', 'dirty-ring', 'dirty-bitmap'] } |
| |
| ## |
| # @DirtyRateInfo: |
| # |
| # Information about current dirty page rate of vm. |
| # |
| # @dirty-rate: an estimate of the dirty page rate of the VM in units of |
| # MB/s, present only when estimating the rate has completed. |
| # |
| # @status: status containing dirtyrate query status includes |
| # 'unstarted' or 'measuring' or 'measured' |
| # |
| # @start-time: start time in units of second for calculation |
| # |
| # @calc-time: time in units of second for sample dirty pages |
| # |
| # @sample-pages: page count per GB for sample dirty pages |
| # the default value is 512 (since 6.1) |
| # |
| # @mode: mode containing method of calculate dirtyrate includes |
| # 'page-sampling' and 'dirty-ring' (Since 6.2) |
| # |
| # @vcpu-dirty-rate: dirtyrate for each vcpu if dirty-ring |
| # mode specified (Since 6.2) |
| # |
| # Since: 5.2 |
| ## |
| { 'struct': 'DirtyRateInfo', |
| 'data': {'*dirty-rate': 'int64', |
| 'status': 'DirtyRateStatus', |
| 'start-time': 'int64', |
| 'calc-time': 'int64', |
| 'sample-pages': 'uint64', |
| 'mode': 'DirtyRateMeasureMode', |
| '*vcpu-dirty-rate': [ 'DirtyRateVcpu' ] } } |
| |
| ## |
| # @calc-dirty-rate: |
| # |
| # start calculating dirty page rate for vm |
| # |
| # @calc-time: time in units of second for sample dirty pages |
| # |
| # @sample-pages: page count per GB for sample dirty pages |
| # the default value is 512 (since 6.1) |
| # |
| # @mode: mechanism of calculating dirtyrate includes |
| # 'page-sampling' and 'dirty-ring' (Since 6.1) |
| # |
| # Since: 5.2 |
| # |
| # Example: |
| # |
| # {"execute": "calc-dirty-rate", "arguments": {"calc-time": 1, |
| # 'sample-pages': 512} } |
| # |
| ## |
| { 'command': 'calc-dirty-rate', 'data': {'calc-time': 'int64', |
| '*sample-pages': 'int', |
| '*mode': 'DirtyRateMeasureMode'} } |
| |
| ## |
| # @query-dirty-rate: |
| # |
| # query dirty page rate in units of MB/s for vm |
| # |
| # Since: 5.2 |
| ## |
| { 'command': 'query-dirty-rate', 'returns': 'DirtyRateInfo' } |
| |
| ## |
| # @DirtyLimitInfo: |
| # |
| # Dirty page rate limit information of a virtual CPU. |
| # |
| # @cpu-index: index of a virtual CPU. |
| # |
| # @limit-rate: upper limit of dirty page rate (MB/s) for a virtual |
| # CPU, 0 means unlimited. |
| # |
| # @current-rate: current dirty page rate (MB/s) for a virtual CPU. |
| # |
| # Since: 7.1 |
| # |
| ## |
| { 'struct': 'DirtyLimitInfo', |
| 'data': { 'cpu-index': 'int', |
| 'limit-rate': 'uint64', |
| 'current-rate': 'uint64' } } |
| |
| ## |
| # @set-vcpu-dirty-limit: |
| # |
| # Set the upper limit of dirty page rate for virtual CPUs. |
| # |
| # Requires KVM with accelerator property "dirty-ring-size" set. |
| # A virtual CPU's dirty page rate is a measure of its memory load. |
| # To observe dirty page rates, use @calc-dirty-rate. |
| # |
| # @cpu-index: index of a virtual CPU, default is all. |
| # |
| # @dirty-rate: upper limit of dirty page rate (MB/s) for virtual CPUs. |
| # |
| # Since: 7.1 |
| # |
| # Example: |
| # {"execute": "set-vcpu-dirty-limit"} |
| # "arguments": { "dirty-rate": 200, |
| # "cpu-index": 1 } } |
| # |
| ## |
| { 'command': 'set-vcpu-dirty-limit', |
| 'data': { '*cpu-index': 'int', |
| 'dirty-rate': 'uint64' } } |
| |
| ## |
| # @cancel-vcpu-dirty-limit: |
| # |
| # Cancel the upper limit of dirty page rate for virtual CPUs. |
| # |
| # Cancel the dirty page limit for the vCPU which has been set with |
| # set-vcpu-dirty-limit command. Note that this command requires |
| # support from dirty ring, same as the "set-vcpu-dirty-limit". |
| # |
| # @cpu-index: index of a virtual CPU, default is all. |
| # |
| # Since: 7.1 |
| # |
| # Example: |
| # {"execute": "cancel-vcpu-dirty-limit"} |
| # "arguments": { "cpu-index": 1 } } |
| # |
| ## |
| { 'command': 'cancel-vcpu-dirty-limit', |
| 'data': { '*cpu-index': 'int'} } |
| |
| ## |
| # @query-vcpu-dirty-limit: |
| # |
| # Returns information about virtual CPU dirty page rate limits, if any. |
| # |
| # Since: 7.1 |
| # |
| # Example: |
| # {"execute": "query-vcpu-dirty-limit"} |
| # |
| ## |
| { 'command': 'query-vcpu-dirty-limit', |
| 'returns': [ 'DirtyLimitInfo' ] } |
| |
| ## |
| # @MigrationThreadInfo: |
| # |
| # Information about migrationthreads |
| # |
| # @name: the name of migration thread |
| # |
| # @thread-id: ID of the underlying host thread |
| # |
| # Since: 7.2 |
| ## |
| { 'struct': 'MigrationThreadInfo', |
| 'data': {'name': 'str', |
| 'thread-id': 'int'} } |
| |
| ## |
| # @query-migrationthreads: |
| # |
| # Returns information of migration threads |
| # |
| # data: migration thread name |
| # |
| # returns: information about migration threads |
| # |
| # Since: 7.2 |
| ## |
| { 'command': 'query-migrationthreads', |
| 'returns': ['MigrationThreadInfo'] } |
| |
| ## |
| # @snapshot-save: |
| # |
| # Save a VM snapshot |
| # |
| # @job-id: identifier for the newly created job |
| # @tag: name of the snapshot to create |
| # @vmstate: block device node name to save vmstate to |
| # @devices: list of block device node names to save a snapshot to |
| # |
| # Applications should not assume that the snapshot save is complete |
| # when this command returns. The job commands / events must be used |
| # to determine completion and to fetch details of any errors that arise. |
| # |
| # Note that execution of the guest CPUs may be stopped during the |
| # time it takes to save the snapshot. A future version of QEMU |
| # may ensure CPUs are executing continuously. |
| # |
| # It is strongly recommended that @devices contain all writable |
| # block device nodes if a consistent snapshot is required. |
| # |
| # If @tag already exists, an error will be reported |
| # |
| # Returns: nothing |
| # |
| # Example: |
| # |
| # -> { "execute": "snapshot-save", |
| # "arguments": { |
| # "job-id": "snapsave0", |
| # "tag": "my-snap", |
| # "vmstate": "disk0", |
| # "devices": ["disk0", "disk1"] |
| # } |
| # } |
| # <- { "return": { } } |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1432121972, "microseconds": 744001}, |
| # "data": {"status": "created", "id": "snapsave0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1432122172, "microseconds": 744001}, |
| # "data": {"status": "running", "id": "snapsave0"}} |
| # <- {"event": "STOP", |
| # "timestamp": {"seconds": 1432122372, "microseconds": 744001} } |
| # <- {"event": "RESUME", |
| # "timestamp": {"seconds": 1432122572, "microseconds": 744001} } |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1432122772, "microseconds": 744001}, |
| # "data": {"status": "waiting", "id": "snapsave0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1432122972, "microseconds": 744001}, |
| # "data": {"status": "pending", "id": "snapsave0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1432123172, "microseconds": 744001}, |
| # "data": {"status": "concluded", "id": "snapsave0"}} |
| # -> {"execute": "query-jobs"} |
| # <- {"return": [{"current-progress": 1, |
| # "status": "concluded", |
| # "total-progress": 1, |
| # "type": "snapshot-save", |
| # "id": "snapsave0"}]} |
| # |
| # Since: 6.0 |
| ## |
| { 'command': 'snapshot-save', |
| 'data': { 'job-id': 'str', |
| 'tag': 'str', |
| 'vmstate': 'str', |
| 'devices': ['str'] } } |
| |
| ## |
| # @snapshot-load: |
| # |
| # Load a VM snapshot |
| # |
| # @job-id: identifier for the newly created job |
| # @tag: name of the snapshot to load. |
| # @vmstate: block device node name to load vmstate from |
| # @devices: list of block device node names to load a snapshot from |
| # |
| # Applications should not assume that the snapshot load is complete |
| # when this command returns. The job commands / events must be used |
| # to determine completion and to fetch details of any errors that arise. |
| # |
| # Note that execution of the guest CPUs will be stopped during the |
| # time it takes to load the snapshot. |
| # |
| # It is strongly recommended that @devices contain all writable |
| # block device nodes that can have changed since the original |
| # @snapshot-save command execution. |
| # |
| # Returns: nothing |
| # |
| # Example: |
| # |
| # -> { "execute": "snapshot-load", |
| # "arguments": { |
| # "job-id": "snapload0", |
| # "tag": "my-snap", |
| # "vmstate": "disk0", |
| # "devices": ["disk0", "disk1"] |
| # } |
| # } |
| # <- { "return": { } } |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1472124172, "microseconds": 744001}, |
| # "data": {"status": "created", "id": "snapload0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1472125172, "microseconds": 744001}, |
| # "data": {"status": "running", "id": "snapload0"}} |
| # <- {"event": "STOP", |
| # "timestamp": {"seconds": 1472125472, "microseconds": 744001} } |
| # <- {"event": "RESUME", |
| # "timestamp": {"seconds": 1472125872, "microseconds": 744001} } |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1472126172, "microseconds": 744001}, |
| # "data": {"status": "waiting", "id": "snapload0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1472127172, "microseconds": 744001}, |
| # "data": {"status": "pending", "id": "snapload0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1472128172, "microseconds": 744001}, |
| # "data": {"status": "concluded", "id": "snapload0"}} |
| # -> {"execute": "query-jobs"} |
| # <- {"return": [{"current-progress": 1, |
| # "status": "concluded", |
| # "total-progress": 1, |
| # "type": "snapshot-load", |
| # "id": "snapload0"}]} |
| # |
| # Since: 6.0 |
| ## |
| { 'command': 'snapshot-load', |
| 'data': { 'job-id': 'str', |
| 'tag': 'str', |
| 'vmstate': 'str', |
| 'devices': ['str'] } } |
| |
| ## |
| # @snapshot-delete: |
| # |
| # Delete a VM snapshot |
| # |
| # @job-id: identifier for the newly created job |
| # @tag: name of the snapshot to delete. |
| # @devices: list of block device node names to delete a snapshot from |
| # |
| # Applications should not assume that the snapshot delete is complete |
| # when this command returns. The job commands / events must be used |
| # to determine completion and to fetch details of any errors that arise. |
| # |
| # Returns: nothing |
| # |
| # Example: |
| # |
| # -> { "execute": "snapshot-delete", |
| # "arguments": { |
| # "job-id": "snapdelete0", |
| # "tag": "my-snap", |
| # "devices": ["disk0", "disk1"] |
| # } |
| # } |
| # <- { "return": { } } |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1442124172, "microseconds": 744001}, |
| # "data": {"status": "created", "id": "snapdelete0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1442125172, "microseconds": 744001}, |
| # "data": {"status": "running", "id": "snapdelete0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1442126172, "microseconds": 744001}, |
| # "data": {"status": "waiting", "id": "snapdelete0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1442127172, "microseconds": 744001}, |
| # "data": {"status": "pending", "id": "snapdelete0"}} |
| # <- {"event": "JOB_STATUS_CHANGE", |
| # "timestamp": {"seconds": 1442128172, "microseconds": 744001}, |
| # "data": {"status": "concluded", "id": "snapdelete0"}} |
| # -> {"execute": "query-jobs"} |
| # <- {"return": [{"current-progress": 1, |
| # "status": "concluded", |
| # "total-progress": 1, |
| # "type": "snapshot-delete", |
| # "id": "snapdelete0"}]} |
| # |
| # Since: 6.0 |
| ## |
| { 'command': 'snapshot-delete', |
| 'data': { 'job-id': 'str', |
| 'tag': 'str', |
| 'devices': ['str'] } } |
