| /* |
| * QEMU PowerPC PowerNV LPC controller |
| * |
| * Copyright (c) 2016, IBM Corporation. |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "sysemu/sysemu.h" |
| #include "target/ppc/cpu.h" |
| #include "qapi/error.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "hw/isa/isa.h" |
| |
| #include "hw/ppc/pnv.h" |
| #include "hw/ppc/pnv_lpc.h" |
| #include "hw/ppc/pnv_xscom.h" |
| #include "hw/ppc/fdt.h" |
| |
| #include <libfdt.h> |
| |
| enum { |
| ECCB_CTL = 0, |
| ECCB_RESET = 1, |
| ECCB_STAT = 2, |
| ECCB_DATA = 3, |
| }; |
| |
| /* OPB Master LS registers */ |
| #define OPB_MASTER_LS_ROUTE0 0x8 |
| #define OPB_MASTER_LS_ROUTE1 0xC |
| #define OPB_MASTER_LS_IRQ_STAT 0x50 |
| #define OPB_MASTER_IRQ_LPC 0x00000800 |
| #define OPB_MASTER_LS_IRQ_MASK 0x54 |
| #define OPB_MASTER_LS_IRQ_POL 0x58 |
| #define OPB_MASTER_LS_IRQ_INPUT 0x5c |
| |
| /* LPC HC registers */ |
| #define LPC_HC_FW_SEG_IDSEL 0x24 |
| #define LPC_HC_FW_RD_ACC_SIZE 0x28 |
| #define LPC_HC_FW_RD_1B 0x00000000 |
| #define LPC_HC_FW_RD_2B 0x01000000 |
| #define LPC_HC_FW_RD_4B 0x02000000 |
| #define LPC_HC_FW_RD_16B 0x04000000 |
| #define LPC_HC_FW_RD_128B 0x07000000 |
| #define LPC_HC_IRQSER_CTRL 0x30 |
| #define LPC_HC_IRQSER_EN 0x80000000 |
| #define LPC_HC_IRQSER_QMODE 0x40000000 |
| #define LPC_HC_IRQSER_START_MASK 0x03000000 |
| #define LPC_HC_IRQSER_START_4CLK 0x00000000 |
| #define LPC_HC_IRQSER_START_6CLK 0x01000000 |
| #define LPC_HC_IRQSER_START_8CLK 0x02000000 |
| #define LPC_HC_IRQMASK 0x34 /* same bit defs as LPC_HC_IRQSTAT */ |
| #define LPC_HC_IRQSTAT 0x38 |
| #define LPC_HC_IRQ_SERIRQ0 0x80000000 /* all bits down to ... */ |
| #define LPC_HC_IRQ_SERIRQ16 0x00008000 /* IRQ16=IOCHK#, IRQ2=SMI# */ |
| #define LPC_HC_IRQ_SERIRQ_ALL 0xffff8000 |
| #define LPC_HC_IRQ_LRESET 0x00000400 |
| #define LPC_HC_IRQ_SYNC_ABNORM_ERR 0x00000080 |
| #define LPC_HC_IRQ_SYNC_NORESP_ERR 0x00000040 |
| #define LPC_HC_IRQ_SYNC_NORM_ERR 0x00000020 |
| #define LPC_HC_IRQ_SYNC_TIMEOUT_ERR 0x00000010 |
| #define LPC_HC_IRQ_SYNC_TARG_TAR_ERR 0x00000008 |
| #define LPC_HC_IRQ_SYNC_BM_TAR_ERR 0x00000004 |
| #define LPC_HC_IRQ_SYNC_BM0_REQ 0x00000002 |
| #define LPC_HC_IRQ_SYNC_BM1_REQ 0x00000001 |
| #define LPC_HC_ERROR_ADDRESS 0x40 |
| |
| #define LPC_OPB_SIZE 0x100000000ull |
| |
| #define ISA_IO_SIZE 0x00010000 |
| #define ISA_MEM_SIZE 0x10000000 |
| #define ISA_FW_SIZE 0x10000000 |
| #define LPC_IO_OPB_ADDR 0xd0010000 |
| #define LPC_IO_OPB_SIZE 0x00010000 |
| #define LPC_MEM_OPB_ADDR 0xe0010000 |
| #define LPC_MEM_OPB_SIZE 0x10000000 |
| #define LPC_FW_OPB_ADDR 0xf0000000 |
| #define LPC_FW_OPB_SIZE 0x10000000 |
| |
| #define LPC_OPB_REGS_OPB_ADDR 0xc0010000 |
| #define LPC_OPB_REGS_OPB_SIZE 0x00000060 |
| #define LPC_OPB_REGS_OPBA_ADDR 0xc0011000 |
| #define LPC_OPB_REGS_OPBA_SIZE 0x00000008 |
| #define LPC_HC_REGS_OPB_ADDR 0xc0012000 |
| #define LPC_HC_REGS_OPB_SIZE 0x00000100 |
| |
| static int pnv_lpc_dt_xscom(PnvXScomInterface *dev, void *fdt, int xscom_offset) |
| { |
| const char compat[] = "ibm,power8-lpc\0ibm,lpc"; |
| char *name; |
| int offset; |
| uint32_t lpc_pcba = PNV_XSCOM_LPC_BASE; |
| uint32_t reg[] = { |
| cpu_to_be32(lpc_pcba), |
| cpu_to_be32(PNV_XSCOM_LPC_SIZE) |
| }; |
| |
| name = g_strdup_printf("isa@%x", lpc_pcba); |
| offset = fdt_add_subnode(fdt, xscom_offset, name); |
| _FDT(offset); |
| g_free(name); |
| |
| _FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg)))); |
| _FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 2))); |
| _FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 1))); |
| _FDT((fdt_setprop(fdt, offset, "compatible", compat, sizeof(compat)))); |
| return 0; |
| } |
| |
| /* POWER9 only */ |
| int pnv_dt_lpc(PnvChip *chip, void *fdt, int root_offset) |
| { |
| const char compat[] = "ibm,power9-lpcm-opb\0simple-bus"; |
| const char lpc_compat[] = "ibm,power9-lpc\0ibm,lpc"; |
| char *name; |
| int offset, lpcm_offset; |
| uint64_t lpcm_addr = PNV9_LPCM_BASE(chip); |
| uint32_t opb_ranges[8] = { 0, |
| cpu_to_be32(lpcm_addr >> 32), |
| cpu_to_be32((uint32_t)lpcm_addr), |
| cpu_to_be32(PNV9_LPCM_SIZE / 2), |
| cpu_to_be32(PNV9_LPCM_SIZE / 2), |
| cpu_to_be32(lpcm_addr >> 32), |
| cpu_to_be32(PNV9_LPCM_SIZE / 2), |
| cpu_to_be32(PNV9_LPCM_SIZE / 2), |
| }; |
| uint32_t opb_reg[4] = { cpu_to_be32(lpcm_addr >> 32), |
| cpu_to_be32((uint32_t)lpcm_addr), |
| cpu_to_be32(PNV9_LPCM_SIZE >> 32), |
| cpu_to_be32((uint32_t)PNV9_LPCM_SIZE), |
| }; |
| uint32_t reg[2]; |
| |
| /* |
| * OPB bus |
| */ |
| name = g_strdup_printf("lpcm-opb@%"PRIx64, lpcm_addr); |
| lpcm_offset = fdt_add_subnode(fdt, root_offset, name); |
| _FDT(lpcm_offset); |
| g_free(name); |
| |
| _FDT((fdt_setprop(fdt, lpcm_offset, "reg", opb_reg, sizeof(opb_reg)))); |
| _FDT((fdt_setprop_cell(fdt, lpcm_offset, "#address-cells", 1))); |
| _FDT((fdt_setprop_cell(fdt, lpcm_offset, "#size-cells", 1))); |
| _FDT((fdt_setprop(fdt, lpcm_offset, "compatible", compat, sizeof(compat)))); |
| _FDT((fdt_setprop_cell(fdt, lpcm_offset, "ibm,chip-id", chip->chip_id))); |
| _FDT((fdt_setprop(fdt, lpcm_offset, "ranges", opb_ranges, |
| sizeof(opb_ranges)))); |
| |
| /* |
| * OPB Master registers |
| */ |
| name = g_strdup_printf("opb-master@%x", LPC_OPB_REGS_OPB_ADDR); |
| offset = fdt_add_subnode(fdt, lpcm_offset, name); |
| _FDT(offset); |
| g_free(name); |
| |
| reg[0] = cpu_to_be32(LPC_OPB_REGS_OPB_ADDR); |
| reg[1] = cpu_to_be32(LPC_OPB_REGS_OPB_SIZE); |
| _FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg)))); |
| _FDT((fdt_setprop_string(fdt, offset, "compatible", |
| "ibm,power9-lpcm-opb-master"))); |
| |
| /* |
| * OPB arbitrer registers |
| */ |
| name = g_strdup_printf("opb-arbitrer@%x", LPC_OPB_REGS_OPBA_ADDR); |
| offset = fdt_add_subnode(fdt, lpcm_offset, name); |
| _FDT(offset); |
| g_free(name); |
| |
| reg[0] = cpu_to_be32(LPC_OPB_REGS_OPBA_ADDR); |
| reg[1] = cpu_to_be32(LPC_OPB_REGS_OPBA_SIZE); |
| _FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg)))); |
| _FDT((fdt_setprop_string(fdt, offset, "compatible", |
| "ibm,power9-lpcm-opb-arbiter"))); |
| |
| /* |
| * LPC Host Controller registers |
| */ |
| name = g_strdup_printf("lpc-controller@%x", LPC_HC_REGS_OPB_ADDR); |
| offset = fdt_add_subnode(fdt, lpcm_offset, name); |
| _FDT(offset); |
| g_free(name); |
| |
| reg[0] = cpu_to_be32(LPC_HC_REGS_OPB_ADDR); |
| reg[1] = cpu_to_be32(LPC_HC_REGS_OPB_SIZE); |
| _FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg)))); |
| _FDT((fdt_setprop_string(fdt, offset, "compatible", |
| "ibm,power9-lpc-controller"))); |
| |
| name = g_strdup_printf("lpc@0"); |
| offset = fdt_add_subnode(fdt, lpcm_offset, name); |
| _FDT(offset); |
| g_free(name); |
| _FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 2))); |
| _FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 1))); |
| _FDT((fdt_setprop(fdt, offset, "compatible", lpc_compat, |
| sizeof(lpc_compat)))); |
| |
| return 0; |
| } |
| |
| /* |
| * These read/write handlers of the OPB address space should be common |
| * with the P9 LPC Controller which uses direct MMIOs. |
| * |
| * TODO: rework to use address_space_stq() and address_space_ldq() |
| * instead. |
| */ |
| static bool opb_read(PnvLpcController *lpc, uint32_t addr, uint8_t *data, |
| int sz) |
| { |
| /* XXX Handle access size limits and FW read caching here */ |
| return !address_space_rw(&lpc->opb_as, addr, MEMTXATTRS_UNSPECIFIED, |
| data, sz, false); |
| } |
| |
| static bool opb_write(PnvLpcController *lpc, uint32_t addr, uint8_t *data, |
| int sz) |
| { |
| /* XXX Handle access size limits here */ |
| return !address_space_rw(&lpc->opb_as, addr, MEMTXATTRS_UNSPECIFIED, |
| data, sz, true); |
| } |
| |
| #define ECCB_CTL_READ PPC_BIT(15) |
| #define ECCB_CTL_SZ_LSH (63 - 7) |
| #define ECCB_CTL_SZ_MASK PPC_BITMASK(4, 7) |
| #define ECCB_CTL_ADDR_MASK PPC_BITMASK(32, 63) |
| |
| #define ECCB_STAT_OP_DONE PPC_BIT(52) |
| #define ECCB_STAT_OP_ERR PPC_BIT(52) |
| #define ECCB_STAT_RD_DATA_LSH (63 - 37) |
| #define ECCB_STAT_RD_DATA_MASK (0xffffffff << ECCB_STAT_RD_DATA_LSH) |
| |
| static void pnv_lpc_do_eccb(PnvLpcController *lpc, uint64_t cmd) |
| { |
| /* XXX Check for magic bits at the top, addr size etc... */ |
| unsigned int sz = (cmd & ECCB_CTL_SZ_MASK) >> ECCB_CTL_SZ_LSH; |
| uint32_t opb_addr = cmd & ECCB_CTL_ADDR_MASK; |
| uint8_t data[8]; |
| bool success; |
| |
| if (sz > sizeof(data)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "ECCB: invalid operation at @0x%08x size %d\n", opb_addr, sz); |
| return; |
| } |
| |
| if (cmd & ECCB_CTL_READ) { |
| success = opb_read(lpc, opb_addr, data, sz); |
| if (success) { |
| lpc->eccb_stat_reg = ECCB_STAT_OP_DONE | |
| (((uint64_t)data[0]) << 24 | |
| ((uint64_t)data[1]) << 16 | |
| ((uint64_t)data[2]) << 8 | |
| ((uint64_t)data[3])) << ECCB_STAT_RD_DATA_LSH; |
| } else { |
| lpc->eccb_stat_reg = ECCB_STAT_OP_DONE | |
| (0xffffffffull << ECCB_STAT_RD_DATA_LSH); |
| } |
| } else { |
| data[0] = lpc->eccb_data_reg >> 24; |
| data[1] = lpc->eccb_data_reg >> 16; |
| data[2] = lpc->eccb_data_reg >> 8; |
| data[3] = lpc->eccb_data_reg; |
| |
| success = opb_write(lpc, opb_addr, data, sz); |
| lpc->eccb_stat_reg = ECCB_STAT_OP_DONE; |
| } |
| /* XXX Which error bit (if any) to signal OPB error ? */ |
| } |
| |
| static uint64_t pnv_lpc_xscom_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| PnvLpcController *lpc = PNV_LPC(opaque); |
| uint32_t offset = addr >> 3; |
| uint64_t val = 0; |
| |
| switch (offset & 3) { |
| case ECCB_CTL: |
| case ECCB_RESET: |
| val = 0; |
| break; |
| case ECCB_STAT: |
| val = lpc->eccb_stat_reg; |
| lpc->eccb_stat_reg = 0; |
| break; |
| case ECCB_DATA: |
| val = ((uint64_t)lpc->eccb_data_reg) << 32; |
| break; |
| } |
| return val; |
| } |
| |
| static void pnv_lpc_xscom_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| PnvLpcController *lpc = PNV_LPC(opaque); |
| uint32_t offset = addr >> 3; |
| |
| switch (offset & 3) { |
| case ECCB_CTL: |
| pnv_lpc_do_eccb(lpc, val); |
| break; |
| case ECCB_RESET: |
| /* XXXX */ |
| break; |
| case ECCB_STAT: |
| break; |
| case ECCB_DATA: |
| lpc->eccb_data_reg = val >> 32; |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps pnv_lpc_xscom_ops = { |
| .read = pnv_lpc_xscom_read, |
| .write = pnv_lpc_xscom_write, |
| .valid.min_access_size = 8, |
| .valid.max_access_size = 8, |
| .impl.min_access_size = 8, |
| .impl.max_access_size = 8, |
| .endianness = DEVICE_BIG_ENDIAN, |
| }; |
| |
| static uint64_t pnv_lpc_mmio_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| PnvLpcController *lpc = PNV_LPC(opaque); |
| uint64_t val = 0; |
| uint32_t opb_addr = addr & ECCB_CTL_ADDR_MASK; |
| MemTxResult result; |
| |
| switch (size) { |
| case 4: |
| val = address_space_ldl(&lpc->opb_as, opb_addr, MEMTXATTRS_UNSPECIFIED, |
| &result); |
| break; |
| case 1: |
| val = address_space_ldub(&lpc->opb_as, opb_addr, MEMTXATTRS_UNSPECIFIED, |
| &result); |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "OPB read failed at @0x%" |
| HWADDR_PRIx " invalid size %d\n", addr, size); |
| return 0; |
| } |
| |
| if (result != MEMTX_OK) { |
| qemu_log_mask(LOG_GUEST_ERROR, "OPB read failed at @0x%" |
| HWADDR_PRIx "\n", addr); |
| } |
| |
| return val; |
| } |
| |
| static void pnv_lpc_mmio_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| PnvLpcController *lpc = PNV_LPC(opaque); |
| uint32_t opb_addr = addr & ECCB_CTL_ADDR_MASK; |
| MemTxResult result; |
| |
| switch (size) { |
| case 4: |
| address_space_stl(&lpc->opb_as, opb_addr, val, MEMTXATTRS_UNSPECIFIED, |
| &result); |
| break; |
| case 1: |
| address_space_stb(&lpc->opb_as, opb_addr, val, MEMTXATTRS_UNSPECIFIED, |
| &result); |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "OPB write failed at @0x%" |
| HWADDR_PRIx " invalid size %d\n", addr, size); |
| return; |
| } |
| |
| if (result != MEMTX_OK) { |
| qemu_log_mask(LOG_GUEST_ERROR, "OPB write failed at @0x%" |
| HWADDR_PRIx "\n", addr); |
| } |
| } |
| |
| static const MemoryRegionOps pnv_lpc_mmio_ops = { |
| .read = pnv_lpc_mmio_read, |
| .write = pnv_lpc_mmio_write, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 4, |
| }, |
| .endianness = DEVICE_BIG_ENDIAN, |
| }; |
| |
| static void pnv_lpc_eval_irqs(PnvLpcController *lpc) |
| { |
| bool lpc_to_opb_irq = false; |
| PnvLpcClass *plc = PNV_LPC_GET_CLASS(lpc); |
| |
| /* Update LPC controller to OPB line */ |
| if (lpc->lpc_hc_irqser_ctrl & LPC_HC_IRQSER_EN) { |
| uint32_t irqs; |
| |
| irqs = lpc->lpc_hc_irqstat & lpc->lpc_hc_irqmask; |
| lpc_to_opb_irq = (irqs != 0); |
| } |
| |
| /* We don't honor the polarity register, it's pointless and unused |
| * anyway |
| */ |
| if (lpc_to_opb_irq) { |
| lpc->opb_irq_input |= OPB_MASTER_IRQ_LPC; |
| } else { |
| lpc->opb_irq_input &= ~OPB_MASTER_IRQ_LPC; |
| } |
| |
| /* Update OPB internal latch */ |
| lpc->opb_irq_stat |= lpc->opb_irq_input & lpc->opb_irq_mask; |
| |
| /* Reflect the interrupt */ |
| pnv_psi_irq_set(lpc->psi, plc->psi_irq, lpc->opb_irq_stat != 0); |
| } |
| |
| static uint64_t lpc_hc_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| PnvLpcController *lpc = opaque; |
| uint64_t val = 0xfffffffffffffffful; |
| |
| switch (addr) { |
| case LPC_HC_FW_SEG_IDSEL: |
| val = lpc->lpc_hc_fw_seg_idsel; |
| break; |
| case LPC_HC_FW_RD_ACC_SIZE: |
| val = lpc->lpc_hc_fw_rd_acc_size; |
| break; |
| case LPC_HC_IRQSER_CTRL: |
| val = lpc->lpc_hc_irqser_ctrl; |
| break; |
| case LPC_HC_IRQMASK: |
| val = lpc->lpc_hc_irqmask; |
| break; |
| case LPC_HC_IRQSTAT: |
| val = lpc->lpc_hc_irqstat; |
| break; |
| case LPC_HC_ERROR_ADDRESS: |
| val = lpc->lpc_hc_error_addr; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "LPC HC Unimplemented register: 0x%" |
| HWADDR_PRIx "\n", addr); |
| } |
| return val; |
| } |
| |
| static void lpc_hc_write(void *opaque, hwaddr addr, uint64_t val, |
| unsigned size) |
| { |
| PnvLpcController *lpc = opaque; |
| |
| /* XXX Filter out reserved bits */ |
| |
| switch (addr) { |
| case LPC_HC_FW_SEG_IDSEL: |
| /* XXX Actually figure out how that works as this impact |
| * memory regions/aliases |
| */ |
| lpc->lpc_hc_fw_seg_idsel = val; |
| break; |
| case LPC_HC_FW_RD_ACC_SIZE: |
| lpc->lpc_hc_fw_rd_acc_size = val; |
| break; |
| case LPC_HC_IRQSER_CTRL: |
| lpc->lpc_hc_irqser_ctrl = val; |
| pnv_lpc_eval_irqs(lpc); |
| break; |
| case LPC_HC_IRQMASK: |
| lpc->lpc_hc_irqmask = val; |
| pnv_lpc_eval_irqs(lpc); |
| break; |
| case LPC_HC_IRQSTAT: |
| lpc->lpc_hc_irqstat &= ~val; |
| pnv_lpc_eval_irqs(lpc); |
| break; |
| case LPC_HC_ERROR_ADDRESS: |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "LPC HC Unimplemented register: 0x%" |
| HWADDR_PRIx "\n", addr); |
| } |
| } |
| |
| static const MemoryRegionOps lpc_hc_ops = { |
| .read = lpc_hc_read, |
| .write = lpc_hc_write, |
| .endianness = DEVICE_BIG_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static uint64_t opb_master_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| PnvLpcController *lpc = opaque; |
| uint64_t val = 0xfffffffffffffffful; |
| |
| switch (addr) { |
| case OPB_MASTER_LS_ROUTE0: /* TODO */ |
| val = lpc->opb_irq_route0; |
| break; |
| case OPB_MASTER_LS_ROUTE1: /* TODO */ |
| val = lpc->opb_irq_route1; |
| break; |
| case OPB_MASTER_LS_IRQ_STAT: |
| val = lpc->opb_irq_stat; |
| break; |
| case OPB_MASTER_LS_IRQ_MASK: |
| val = lpc->opb_irq_mask; |
| break; |
| case OPB_MASTER_LS_IRQ_POL: |
| val = lpc->opb_irq_pol; |
| break; |
| case OPB_MASTER_LS_IRQ_INPUT: |
| val = lpc->opb_irq_input; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "OPBM: read on unimplemented register: 0x%" |
| HWADDR_PRIx "\n", addr); |
| } |
| |
| return val; |
| } |
| |
| static void opb_master_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| PnvLpcController *lpc = opaque; |
| |
| switch (addr) { |
| case OPB_MASTER_LS_ROUTE0: /* TODO */ |
| lpc->opb_irq_route0 = val; |
| break; |
| case OPB_MASTER_LS_ROUTE1: /* TODO */ |
| lpc->opb_irq_route1 = val; |
| break; |
| case OPB_MASTER_LS_IRQ_STAT: |
| lpc->opb_irq_stat &= ~val; |
| pnv_lpc_eval_irqs(lpc); |
| break; |
| case OPB_MASTER_LS_IRQ_MASK: |
| lpc->opb_irq_mask = val; |
| pnv_lpc_eval_irqs(lpc); |
| break; |
| case OPB_MASTER_LS_IRQ_POL: |
| lpc->opb_irq_pol = val; |
| pnv_lpc_eval_irqs(lpc); |
| break; |
| case OPB_MASTER_LS_IRQ_INPUT: |
| /* Read only */ |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "OPBM: write on unimplemented register: 0x%" |
| HWADDR_PRIx " val=0x%08"PRIx64"\n", addr, val); |
| } |
| } |
| |
| static const MemoryRegionOps opb_master_ops = { |
| .read = opb_master_read, |
| .write = opb_master_write, |
| .endianness = DEVICE_BIG_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static void pnv_lpc_power8_realize(DeviceState *dev, Error **errp) |
| { |
| PnvLpcController *lpc = PNV_LPC(dev); |
| PnvLpcClass *plc = PNV_LPC_GET_CLASS(dev); |
| Error *local_err = NULL; |
| |
| plc->parent_realize(dev, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| /* P8 uses a XSCOM region for LPC registers */ |
| pnv_xscom_region_init(&lpc->xscom_regs, OBJECT(lpc), |
| &pnv_lpc_xscom_ops, lpc, "xscom-lpc", |
| PNV_XSCOM_LPC_SIZE); |
| } |
| |
| static void pnv_lpc_power8_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PnvXScomInterfaceClass *xdc = PNV_XSCOM_INTERFACE_CLASS(klass); |
| PnvLpcClass *plc = PNV_LPC_CLASS(klass); |
| |
| dc->desc = "PowerNV LPC Controller POWER8"; |
| |
| xdc->dt_xscom = pnv_lpc_dt_xscom; |
| |
| plc->psi_irq = PSIHB_IRQ_LPC_I2C; |
| |
| device_class_set_parent_realize(dc, pnv_lpc_power8_realize, |
| &plc->parent_realize); |
| } |
| |
| static const TypeInfo pnv_lpc_power8_info = { |
| .name = TYPE_PNV8_LPC, |
| .parent = TYPE_PNV_LPC, |
| .instance_size = sizeof(PnvLpcController), |
| .class_init = pnv_lpc_power8_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_PNV_XSCOM_INTERFACE }, |
| { } |
| } |
| }; |
| |
| static void pnv_lpc_power9_realize(DeviceState *dev, Error **errp) |
| { |
| PnvLpcController *lpc = PNV_LPC(dev); |
| PnvLpcClass *plc = PNV_LPC_GET_CLASS(dev); |
| Error *local_err = NULL; |
| |
| plc->parent_realize(dev, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| /* P9 uses a MMIO region */ |
| memory_region_init_io(&lpc->xscom_regs, OBJECT(lpc), &pnv_lpc_mmio_ops, |
| lpc, "lpcm", PNV9_LPCM_SIZE); |
| } |
| |
| static void pnv_lpc_power9_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PnvLpcClass *plc = PNV_LPC_CLASS(klass); |
| |
| dc->desc = "PowerNV LPC Controller POWER9"; |
| |
| plc->psi_irq = PSIHB9_IRQ_LPCHC; |
| |
| device_class_set_parent_realize(dc, pnv_lpc_power9_realize, |
| &plc->parent_realize); |
| } |
| |
| static const TypeInfo pnv_lpc_power9_info = { |
| .name = TYPE_PNV9_LPC, |
| .parent = TYPE_PNV_LPC, |
| .instance_size = sizeof(PnvLpcController), |
| .class_init = pnv_lpc_power9_class_init, |
| }; |
| |
| static void pnv_lpc_realize(DeviceState *dev, Error **errp) |
| { |
| PnvLpcController *lpc = PNV_LPC(dev); |
| Object *obj; |
| Error *local_err = NULL; |
| |
| obj = object_property_get_link(OBJECT(dev), "psi", &local_err); |
| if (!obj) { |
| error_propagate(errp, local_err); |
| error_prepend(errp, "required link 'psi' not found: "); |
| return; |
| } |
| /* The LPC controller needs PSI to generate interrupts */ |
| lpc->psi = PNV_PSI(obj); |
| |
| /* Reg inits */ |
| lpc->lpc_hc_fw_rd_acc_size = LPC_HC_FW_RD_4B; |
| |
| /* Create address space and backing MR for the OPB bus */ |
| memory_region_init(&lpc->opb_mr, OBJECT(dev), "lpc-opb", 0x100000000ull); |
| address_space_init(&lpc->opb_as, &lpc->opb_mr, "lpc-opb"); |
| |
| /* Create ISA IO and Mem space regions which are the root of |
| * the ISA bus (ie, ISA address spaces). We don't create a |
| * separate one for FW which we alias to memory. |
| */ |
| memory_region_init(&lpc->isa_io, OBJECT(dev), "isa-io", ISA_IO_SIZE); |
| memory_region_init(&lpc->isa_mem, OBJECT(dev), "isa-mem", ISA_MEM_SIZE); |
| memory_region_init(&lpc->isa_fw, OBJECT(dev), "isa-fw", ISA_FW_SIZE); |
| |
| /* Create windows from the OPB space to the ISA space */ |
| memory_region_init_alias(&lpc->opb_isa_io, OBJECT(dev), "lpc-isa-io", |
| &lpc->isa_io, 0, LPC_IO_OPB_SIZE); |
| memory_region_add_subregion(&lpc->opb_mr, LPC_IO_OPB_ADDR, |
| &lpc->opb_isa_io); |
| memory_region_init_alias(&lpc->opb_isa_mem, OBJECT(dev), "lpc-isa-mem", |
| &lpc->isa_mem, 0, LPC_MEM_OPB_SIZE); |
| memory_region_add_subregion(&lpc->opb_mr, LPC_MEM_OPB_ADDR, |
| &lpc->opb_isa_mem); |
| memory_region_init_alias(&lpc->opb_isa_fw, OBJECT(dev), "lpc-isa-fw", |
| &lpc->isa_fw, 0, LPC_FW_OPB_SIZE); |
| memory_region_add_subregion(&lpc->opb_mr, LPC_FW_OPB_ADDR, |
| &lpc->opb_isa_fw); |
| |
| /* Create MMIO regions for LPC HC and OPB registers */ |
| memory_region_init_io(&lpc->opb_master_regs, OBJECT(dev), &opb_master_ops, |
| lpc, "lpc-opb-master", LPC_OPB_REGS_OPB_SIZE); |
| memory_region_add_subregion(&lpc->opb_mr, LPC_OPB_REGS_OPB_ADDR, |
| &lpc->opb_master_regs); |
| memory_region_init_io(&lpc->lpc_hc_regs, OBJECT(dev), &lpc_hc_ops, lpc, |
| "lpc-hc", LPC_HC_REGS_OPB_SIZE); |
| memory_region_add_subregion(&lpc->opb_mr, LPC_HC_REGS_OPB_ADDR, |
| &lpc->lpc_hc_regs); |
| } |
| |
| static void pnv_lpc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = pnv_lpc_realize; |
| dc->desc = "PowerNV LPC Controller"; |
| } |
| |
| static const TypeInfo pnv_lpc_info = { |
| .name = TYPE_PNV_LPC, |
| .parent = TYPE_DEVICE, |
| .class_init = pnv_lpc_class_init, |
| .class_size = sizeof(PnvLpcClass), |
| .abstract = true, |
| }; |
| |
| static void pnv_lpc_register_types(void) |
| { |
| type_register_static(&pnv_lpc_info); |
| type_register_static(&pnv_lpc_power8_info); |
| type_register_static(&pnv_lpc_power9_info); |
| } |
| |
| type_init(pnv_lpc_register_types) |
| |
| /* If we don't use the built-in LPC interrupt deserializer, we need |
| * to provide a set of qirqs for the ISA bus or things will go bad. |
| * |
| * Most machines using pre-Naples chips (without said deserializer) |
| * have a CPLD that will collect the SerIRQ and shoot them as a |
| * single level interrupt to the P8 chip. So let's setup a hook |
| * for doing just that. |
| */ |
| static void pnv_lpc_isa_irq_handler_cpld(void *opaque, int n, int level) |
| { |
| PnvMachineState *pnv = PNV_MACHINE(qdev_get_machine()); |
| uint32_t old_state = pnv->cpld_irqstate; |
| PnvLpcController *lpc = PNV_LPC(opaque); |
| |
| if (level) { |
| pnv->cpld_irqstate |= 1u << n; |
| } else { |
| pnv->cpld_irqstate &= ~(1u << n); |
| } |
| |
| if (pnv->cpld_irqstate != old_state) { |
| pnv_psi_irq_set(lpc->psi, PSIHB_IRQ_EXTERNAL, pnv->cpld_irqstate != 0); |
| } |
| } |
| |
| static void pnv_lpc_isa_irq_handler(void *opaque, int n, int level) |
| { |
| PnvLpcController *lpc = PNV_LPC(opaque); |
| |
| /* The Naples HW latches the 1 levels, clearing is done by SW */ |
| if (level) { |
| lpc->lpc_hc_irqstat |= LPC_HC_IRQ_SERIRQ0 >> n; |
| pnv_lpc_eval_irqs(lpc); |
| } |
| } |
| |
| ISABus *pnv_lpc_isa_create(PnvLpcController *lpc, bool use_cpld, Error **errp) |
| { |
| Error *local_err = NULL; |
| ISABus *isa_bus; |
| qemu_irq *irqs; |
| qemu_irq_handler handler; |
| |
| /* let isa_bus_new() create its own bridge on SysBus otherwise |
| * devices speficied on the command line won't find the bus and |
| * will fail to create. |
| */ |
| isa_bus = isa_bus_new(NULL, &lpc->isa_mem, &lpc->isa_io, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return NULL; |
| } |
| |
| /* Not all variants have a working serial irq decoder. If not, |
| * handling of LPC interrupts becomes a platform issue (some |
| * platforms have a CPLD to do it). |
| */ |
| if (use_cpld) { |
| handler = pnv_lpc_isa_irq_handler_cpld; |
| } else { |
| handler = pnv_lpc_isa_irq_handler; |
| } |
| |
| irqs = qemu_allocate_irqs(handler, lpc, ISA_NUM_IRQS); |
| |
| isa_bus_irqs(isa_bus, irqs); |
| return isa_bus; |
| } |
