| /* Support for generating ACPI tables and passing them to Guests |
| * |
| * Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net> |
| * Copyright (C) 2006 Fabrice Bellard |
| * Copyright (C) 2013 Red Hat Inc |
| * |
| * Author: Michael S. Tsirkin <mst@redhat.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "qapi/qmp/qnum.h" |
| #include "acpi-build.h" |
| #include "qemu-common.h" |
| #include "qemu/bitmap.h" |
| #include "qemu/error-report.h" |
| #include "hw/pci/pci.h" |
| #include "qom/cpu.h" |
| #include "target/i386/cpu.h" |
| #include "hw/misc/pvpanic.h" |
| #include "hw/timer/hpet.h" |
| #include "hw/acpi/acpi-defs.h" |
| #include "hw/acpi/acpi.h" |
| #include "hw/acpi/cpu.h" |
| #include "hw/acpi/piix4.h" |
| #include "hw/nvram/fw_cfg.h" |
| #include "hw/acpi/bios-linker-loader.h" |
| #include "hw/loader.h" |
| #include "hw/isa/isa.h" |
| #include "hw/block/fdc.h" |
| #include "hw/acpi/memory_hotplug.h" |
| #include "sysemu/tpm.h" |
| #include "hw/acpi/tpm.h" |
| #include "hw/acpi/vmgenid.h" |
| #include "sysemu/tpm_backend.h" |
| #include "hw/timer/mc146818rtc_regs.h" |
| #include "hw/mem/memory-device.h" |
| #include "sysemu/numa.h" |
| |
| /* Supported chipsets: */ |
| #include "hw/acpi/piix4.h" |
| #include "hw/acpi/pcihp.h" |
| #include "hw/i386/ich9.h" |
| #include "hw/pci/pci_bus.h" |
| #include "hw/pci-host/q35.h" |
| #include "hw/i386/x86-iommu.h" |
| |
| #include "hw/acpi/aml-build.h" |
| #include "hw/acpi/pci.h" |
| |
| #include "qom/qom-qobject.h" |
| #include "hw/i386/amd_iommu.h" |
| #include "hw/i386/intel_iommu.h" |
| |
| #include "hw/acpi/ipmi.h" |
| |
| /* These are used to size the ACPI tables for -M pc-i440fx-1.7 and |
| * -M pc-i440fx-2.0. Even if the actual amount of AML generated grows |
| * a little bit, there should be plenty of free space since the DSDT |
| * shrunk by ~1.5k between QEMU 2.0 and QEMU 2.1. |
| */ |
| #define ACPI_BUILD_LEGACY_CPU_AML_SIZE 97 |
| #define ACPI_BUILD_ALIGN_SIZE 0x1000 |
| |
| #define ACPI_BUILD_TABLE_SIZE 0x20000 |
| |
| /* #define DEBUG_ACPI_BUILD */ |
| #ifdef DEBUG_ACPI_BUILD |
| #define ACPI_BUILD_DPRINTF(fmt, ...) \ |
| do {printf("ACPI_BUILD: " fmt, ## __VA_ARGS__); } while (0) |
| #else |
| #define ACPI_BUILD_DPRINTF(fmt, ...) |
| #endif |
| |
| /* Default IOAPIC ID */ |
| #define ACPI_BUILD_IOAPIC_ID 0x0 |
| |
| typedef struct AcpiPmInfo { |
| bool s3_disabled; |
| bool s4_disabled; |
| bool pcihp_bridge_en; |
| uint8_t s4_val; |
| AcpiFadtData fadt; |
| uint16_t cpu_hp_io_base; |
| uint16_t pcihp_io_base; |
| uint16_t pcihp_io_len; |
| } AcpiPmInfo; |
| |
| typedef struct AcpiMiscInfo { |
| bool is_piix4; |
| bool has_hpet; |
| TPMVersion tpm_version; |
| const unsigned char *dsdt_code; |
| unsigned dsdt_size; |
| uint16_t pvpanic_port; |
| uint16_t applesmc_io_base; |
| } AcpiMiscInfo; |
| |
| typedef struct AcpiBuildPciBusHotplugState { |
| GArray *device_table; |
| GArray *notify_table; |
| struct AcpiBuildPciBusHotplugState *parent; |
| bool pcihp_bridge_en; |
| } AcpiBuildPciBusHotplugState; |
| |
| typedef struct FwCfgTPMConfig { |
| uint32_t tpmppi_address; |
| uint8_t tpm_version; |
| uint8_t tpmppi_version; |
| } QEMU_PACKED FwCfgTPMConfig; |
| |
| static void init_common_fadt_data(Object *o, AcpiFadtData *data) |
| { |
| uint32_t io = object_property_get_uint(o, ACPI_PM_PROP_PM_IO_BASE, NULL); |
| AmlAddressSpace as = AML_AS_SYSTEM_IO; |
| AcpiFadtData fadt = { |
| .rev = 3, |
| .flags = |
| (1 << ACPI_FADT_F_WBINVD) | |
| (1 << ACPI_FADT_F_PROC_C1) | |
| (1 << ACPI_FADT_F_SLP_BUTTON) | |
| (1 << ACPI_FADT_F_RTC_S4) | |
| (1 << ACPI_FADT_F_USE_PLATFORM_CLOCK) | |
| /* APIC destination mode ("Flat Logical") has an upper limit of 8 |
| * CPUs for more than 8 CPUs, "Clustered Logical" mode has to be |
| * used |
| */ |
| ((max_cpus > 8) ? (1 << ACPI_FADT_F_FORCE_APIC_CLUSTER_MODEL) : 0), |
| .int_model = 1 /* Multiple APIC */, |
| .rtc_century = RTC_CENTURY, |
| .plvl2_lat = 0xfff /* C2 state not supported */, |
| .plvl3_lat = 0xfff /* C3 state not supported */, |
| .smi_cmd = ACPI_PORT_SMI_CMD, |
| .sci_int = object_property_get_uint(o, ACPI_PM_PROP_SCI_INT, NULL), |
| .acpi_enable_cmd = |
| object_property_get_uint(o, ACPI_PM_PROP_ACPI_ENABLE_CMD, NULL), |
| .acpi_disable_cmd = |
| object_property_get_uint(o, ACPI_PM_PROP_ACPI_DISABLE_CMD, NULL), |
| .pm1a_evt = { .space_id = as, .bit_width = 4 * 8, .address = io }, |
| .pm1a_cnt = { .space_id = as, .bit_width = 2 * 8, |
| .address = io + 0x04 }, |
| .pm_tmr = { .space_id = as, .bit_width = 4 * 8, .address = io + 0x08 }, |
| .gpe0_blk = { .space_id = as, .bit_width = |
| object_property_get_uint(o, ACPI_PM_PROP_GPE0_BLK_LEN, NULL) * 8, |
| .address = object_property_get_uint(o, ACPI_PM_PROP_GPE0_BLK, NULL) |
| }, |
| }; |
| *data = fadt; |
| } |
| |
| static Object *object_resolve_type_unambiguous(const char *typename) |
| { |
| bool ambig; |
| Object *o = object_resolve_path_type("", typename, &ambig); |
| |
| if (ambig || !o) { |
| return NULL; |
| } |
| return o; |
| } |
| |
| static void acpi_get_pm_info(AcpiPmInfo *pm) |
| { |
| Object *piix = object_resolve_type_unambiguous(TYPE_PIIX4_PM); |
| Object *lpc = object_resolve_type_unambiguous(TYPE_ICH9_LPC_DEVICE); |
| Object *obj = piix ? piix : lpc; |
| QObject *o; |
| pm->cpu_hp_io_base = 0; |
| pm->pcihp_io_base = 0; |
| pm->pcihp_io_len = 0; |
| |
| assert(obj); |
| init_common_fadt_data(obj, &pm->fadt); |
| if (piix) { |
| /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */ |
| pm->fadt.rev = 1; |
| pm->cpu_hp_io_base = PIIX4_CPU_HOTPLUG_IO_BASE; |
| pm->pcihp_io_base = |
| object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); |
| pm->pcihp_io_len = |
| object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); |
| } |
| if (lpc) { |
| struct AcpiGenericAddress r = { .space_id = AML_AS_SYSTEM_IO, |
| .bit_width = 8, .address = ICH9_RST_CNT_IOPORT }; |
| pm->fadt.reset_reg = r; |
| pm->fadt.reset_val = 0xf; |
| pm->fadt.flags |= 1 << ACPI_FADT_F_RESET_REG_SUP; |
| pm->cpu_hp_io_base = ICH9_CPU_HOTPLUG_IO_BASE; |
| } |
| |
| /* The above need not be conditional on machine type because the reset port |
| * happens to be the same on PIIX (pc) and ICH9 (q35). */ |
| QEMU_BUILD_BUG_ON(ICH9_RST_CNT_IOPORT != RCR_IOPORT); |
| |
| /* Fill in optional s3/s4 related properties */ |
| o = object_property_get_qobject(obj, ACPI_PM_PROP_S3_DISABLED, NULL); |
| if (o) { |
| pm->s3_disabled = qnum_get_uint(qobject_to(QNum, o)); |
| } else { |
| pm->s3_disabled = false; |
| } |
| qobject_unref(o); |
| o = object_property_get_qobject(obj, ACPI_PM_PROP_S4_DISABLED, NULL); |
| if (o) { |
| pm->s4_disabled = qnum_get_uint(qobject_to(QNum, o)); |
| } else { |
| pm->s4_disabled = false; |
| } |
| qobject_unref(o); |
| o = object_property_get_qobject(obj, ACPI_PM_PROP_S4_VAL, NULL); |
| if (o) { |
| pm->s4_val = qnum_get_uint(qobject_to(QNum, o)); |
| } else { |
| pm->s4_val = false; |
| } |
| qobject_unref(o); |
| |
| pm->pcihp_bridge_en = |
| object_property_get_bool(obj, "acpi-pci-hotplug-with-bridge-support", |
| NULL); |
| } |
| |
| static void acpi_get_misc_info(AcpiMiscInfo *info) |
| { |
| Object *piix = object_resolve_type_unambiguous(TYPE_PIIX4_PM); |
| Object *lpc = object_resolve_type_unambiguous(TYPE_ICH9_LPC_DEVICE); |
| assert(!!piix != !!lpc); |
| |
| if (piix) { |
| info->is_piix4 = true; |
| } |
| if (lpc) { |
| info->is_piix4 = false; |
| } |
| |
| info->has_hpet = hpet_find(); |
| info->tpm_version = tpm_get_version(tpm_find()); |
| info->pvpanic_port = pvpanic_port(); |
| info->applesmc_io_base = applesmc_port(); |
| } |
| |
| /* |
| * Because of the PXB hosts we cannot simply query TYPE_PCI_HOST_BRIDGE. |
| * On i386 arch we only have two pci hosts, so we can look only for them. |
| */ |
| static Object *acpi_get_i386_pci_host(void) |
| { |
| PCIHostState *host; |
| |
| host = OBJECT_CHECK(PCIHostState, |
| object_resolve_path("/machine/i440fx", NULL), |
| TYPE_PCI_HOST_BRIDGE); |
| if (!host) { |
| host = OBJECT_CHECK(PCIHostState, |
| object_resolve_path("/machine/q35", NULL), |
| TYPE_PCI_HOST_BRIDGE); |
| } |
| |
| return OBJECT(host); |
| } |
| |
| static void acpi_get_pci_holes(Range *hole, Range *hole64) |
| { |
| Object *pci_host; |
| |
| pci_host = acpi_get_i386_pci_host(); |
| g_assert(pci_host); |
| |
| range_set_bounds1(hole, |
| object_property_get_uint(pci_host, |
| PCI_HOST_PROP_PCI_HOLE_START, |
| NULL), |
| object_property_get_uint(pci_host, |
| PCI_HOST_PROP_PCI_HOLE_END, |
| NULL)); |
| range_set_bounds1(hole64, |
| object_property_get_uint(pci_host, |
| PCI_HOST_PROP_PCI_HOLE64_START, |
| NULL), |
| object_property_get_uint(pci_host, |
| PCI_HOST_PROP_PCI_HOLE64_END, |
| NULL)); |
| } |
| |
| static void acpi_align_size(GArray *blob, unsigned align) |
| { |
| /* Align size to multiple of given size. This reduces the chance |
| * we need to change size in the future (breaking cross version migration). |
| */ |
| g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align)); |
| } |
| |
| /* FACS */ |
| static void |
| build_facs(GArray *table_data) |
| { |
| AcpiFacsDescriptorRev1 *facs = acpi_data_push(table_data, sizeof *facs); |
| memcpy(&facs->signature, "FACS", 4); |
| facs->length = cpu_to_le32(sizeof(*facs)); |
| } |
| |
| void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, |
| const CPUArchIdList *apic_ids, GArray *entry) |
| { |
| uint32_t apic_id = apic_ids->cpus[uid].arch_id; |
| |
| /* ACPI spec says that LAPIC entry for non present |
| * CPU may be omitted from MADT or it must be marked |
| * as disabled. However omitting non present CPU from |
| * MADT breaks hotplug on linux. So possible CPUs |
| * should be put in MADT but kept disabled. |
| */ |
| if (apic_id < 255) { |
| AcpiMadtProcessorApic *apic = acpi_data_push(entry, sizeof *apic); |
| |
| apic->type = ACPI_APIC_PROCESSOR; |
| apic->length = sizeof(*apic); |
| apic->processor_id = uid; |
| apic->local_apic_id = apic_id; |
| if (apic_ids->cpus[uid].cpu != NULL) { |
| apic->flags = cpu_to_le32(1); |
| } else { |
| apic->flags = cpu_to_le32(0); |
| } |
| } else { |
| AcpiMadtProcessorX2Apic *apic = acpi_data_push(entry, sizeof *apic); |
| |
| apic->type = ACPI_APIC_LOCAL_X2APIC; |
| apic->length = sizeof(*apic); |
| apic->uid = cpu_to_le32(uid); |
| apic->x2apic_id = cpu_to_le32(apic_id); |
| if (apic_ids->cpus[uid].cpu != NULL) { |
| apic->flags = cpu_to_le32(1); |
| } else { |
| apic->flags = cpu_to_le32(0); |
| } |
| } |
| } |
| |
| static void |
| build_madt(GArray *table_data, BIOSLinker *linker, PCMachineState *pcms) |
| { |
| MachineClass *mc = MACHINE_GET_CLASS(pcms); |
| const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(pcms)); |
| int madt_start = table_data->len; |
| AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(pcms->acpi_dev); |
| AcpiDeviceIf *adev = ACPI_DEVICE_IF(pcms->acpi_dev); |
| bool x2apic_mode = false; |
| |
| AcpiMultipleApicTable *madt; |
| AcpiMadtIoApic *io_apic; |
| AcpiMadtIntsrcovr *intsrcovr; |
| int i; |
| |
| madt = acpi_data_push(table_data, sizeof *madt); |
| madt->local_apic_address = cpu_to_le32(APIC_DEFAULT_ADDRESS); |
| madt->flags = cpu_to_le32(1); |
| |
| for (i = 0; i < apic_ids->len; i++) { |
| adevc->madt_cpu(adev, i, apic_ids, table_data); |
| if (apic_ids->cpus[i].arch_id > 254) { |
| x2apic_mode = true; |
| } |
| } |
| |
| io_apic = acpi_data_push(table_data, sizeof *io_apic); |
| io_apic->type = ACPI_APIC_IO; |
| io_apic->length = sizeof(*io_apic); |
| io_apic->io_apic_id = ACPI_BUILD_IOAPIC_ID; |
| io_apic->address = cpu_to_le32(IO_APIC_DEFAULT_ADDRESS); |
| io_apic->interrupt = cpu_to_le32(0); |
| |
| if (pcms->apic_xrupt_override) { |
| intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr); |
| intsrcovr->type = ACPI_APIC_XRUPT_OVERRIDE; |
| intsrcovr->length = sizeof(*intsrcovr); |
| intsrcovr->source = 0; |
| intsrcovr->gsi = cpu_to_le32(2); |
| intsrcovr->flags = cpu_to_le16(0); /* conforms to bus specifications */ |
| } |
| for (i = 1; i < 16; i++) { |
| #define ACPI_BUILD_PCI_IRQS ((1<<5) | (1<<9) | (1<<10) | (1<<11)) |
| if (!(ACPI_BUILD_PCI_IRQS & (1 << i))) { |
| /* No need for a INT source override structure. */ |
| continue; |
| } |
| intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr); |
| intsrcovr->type = ACPI_APIC_XRUPT_OVERRIDE; |
| intsrcovr->length = sizeof(*intsrcovr); |
| intsrcovr->source = i; |
| intsrcovr->gsi = cpu_to_le32(i); |
| intsrcovr->flags = cpu_to_le16(0xd); /* active high, level triggered */ |
| } |
| |
| if (x2apic_mode) { |
| AcpiMadtLocalX2ApicNmi *local_nmi; |
| |
| local_nmi = acpi_data_push(table_data, sizeof *local_nmi); |
| local_nmi->type = ACPI_APIC_LOCAL_X2APIC_NMI; |
| local_nmi->length = sizeof(*local_nmi); |
| local_nmi->uid = 0xFFFFFFFF; /* all processors */ |
| local_nmi->flags = cpu_to_le16(0); |
| local_nmi->lint = 1; /* ACPI_LINT1 */ |
| } else { |
| AcpiMadtLocalNmi *local_nmi; |
| |
| local_nmi = acpi_data_push(table_data, sizeof *local_nmi); |
| local_nmi->type = ACPI_APIC_LOCAL_NMI; |
| local_nmi->length = sizeof(*local_nmi); |
| local_nmi->processor_id = 0xff; /* all processors */ |
| local_nmi->flags = cpu_to_le16(0); |
| local_nmi->lint = 1; /* ACPI_LINT1 */ |
| } |
| |
| build_header(linker, table_data, |
| (void *)(table_data->data + madt_start), "APIC", |
| table_data->len - madt_start, 1, NULL, NULL); |
| } |
| |
| static void build_append_pcihp_notify_entry(Aml *method, int slot) |
| { |
| Aml *if_ctx; |
| int32_t devfn = PCI_DEVFN(slot, 0); |
| |
| if_ctx = aml_if(aml_and(aml_arg(0), aml_int(0x1U << slot), NULL)); |
| aml_append(if_ctx, aml_notify(aml_name("S%.02X", devfn), aml_arg(1))); |
| aml_append(method, if_ctx); |
| } |
| |
| static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, |
| bool pcihp_bridge_en) |
| { |
| Aml *dev, *notify_method = NULL, *method; |
| QObject *bsel; |
| PCIBus *sec; |
| int i; |
| |
| bsel = object_property_get_qobject(OBJECT(bus), ACPI_PCIHP_PROP_BSEL, NULL); |
| if (bsel) { |
| uint64_t bsel_val = qnum_get_uint(qobject_to(QNum, bsel)); |
| |
| aml_append(parent_scope, aml_name_decl("BSEL", aml_int(bsel_val))); |
| notify_method = aml_method("DVNT", 2, AML_NOTSERIALIZED); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(bus->devices); i += PCI_FUNC_MAX) { |
| DeviceClass *dc; |
| PCIDeviceClass *pc; |
| PCIDevice *pdev = bus->devices[i]; |
| int slot = PCI_SLOT(i); |
| bool hotplug_enabled_dev; |
| bool bridge_in_acpi; |
| |
| if (!pdev) { |
| if (bsel) { /* add hotplug slots for non present devices */ |
| dev = aml_device("S%.02X", PCI_DEVFN(slot, 0)); |
| aml_append(dev, aml_name_decl("_SUN", aml_int(slot))); |
| aml_append(dev, aml_name_decl("_ADR", aml_int(slot << 16))); |
| method = aml_method("_EJ0", 1, AML_NOTSERIALIZED); |
| aml_append(method, |
| aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN")) |
| ); |
| aml_append(dev, method); |
| aml_append(parent_scope, dev); |
| |
| build_append_pcihp_notify_entry(notify_method, slot); |
| } |
| continue; |
| } |
| |
| pc = PCI_DEVICE_GET_CLASS(pdev); |
| dc = DEVICE_GET_CLASS(pdev); |
| |
| /* When hotplug for bridges is enabled, bridges are |
| * described in ACPI separately (see build_pci_bus_end). |
| * In this case they aren't themselves hot-pluggable. |
| * Hotplugged bridges *are* hot-pluggable. |
| */ |
| bridge_in_acpi = pc->is_bridge && pcihp_bridge_en && |
| !DEVICE(pdev)->hotplugged; |
| |
| hotplug_enabled_dev = bsel && dc->hotpluggable && !bridge_in_acpi; |
| |
| if (pc->class_id == PCI_CLASS_BRIDGE_ISA) { |
| continue; |
| } |
| |
| /* start to compose PCI slot descriptor */ |
| dev = aml_device("S%.02X", PCI_DEVFN(slot, 0)); |
| aml_append(dev, aml_name_decl("_ADR", aml_int(slot << 16))); |
| |
| if (pc->class_id == PCI_CLASS_DISPLAY_VGA) { |
| /* add VGA specific AML methods */ |
| int s3d; |
| |
| if (object_dynamic_cast(OBJECT(pdev), "qxl-vga")) { |
| s3d = 3; |
| } else { |
| s3d = 0; |
| } |
| |
| method = aml_method("_S1D", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_int(0))); |
| aml_append(dev, method); |
| |
| method = aml_method("_S2D", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_int(0))); |
| aml_append(dev, method); |
| |
| method = aml_method("_S3D", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_int(s3d))); |
| aml_append(dev, method); |
| } else if (hotplug_enabled_dev) { |
| /* add _SUN/_EJ0 to make slot hotpluggable */ |
| aml_append(dev, aml_name_decl("_SUN", aml_int(slot))); |
| |
| method = aml_method("_EJ0", 1, AML_NOTSERIALIZED); |
| aml_append(method, |
| aml_call2("PCEJ", aml_name("BSEL"), aml_name("_SUN")) |
| ); |
| aml_append(dev, method); |
| |
| if (bsel) { |
| build_append_pcihp_notify_entry(notify_method, slot); |
| } |
| } else if (bridge_in_acpi) { |
| /* |
| * device is coldplugged bridge, |
| * add child device descriptions into its scope |
| */ |
| PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(pdev)); |
| |
| build_append_pci_bus_devices(dev, sec_bus, pcihp_bridge_en); |
| } |
| /* slot descriptor has been composed, add it into parent context */ |
| aml_append(parent_scope, dev); |
| } |
| |
| if (bsel) { |
| aml_append(parent_scope, notify_method); |
| } |
| |
| /* Append PCNT method to notify about events on local and child buses. |
| * Add unconditionally for root since DSDT expects it. |
| */ |
| method = aml_method("PCNT", 0, AML_NOTSERIALIZED); |
| |
| /* If bus supports hotplug select it and notify about local events */ |
| if (bsel) { |
| uint64_t bsel_val = qnum_get_uint(qobject_to(QNum, bsel)); |
| |
| aml_append(method, aml_store(aml_int(bsel_val), aml_name("BNUM"))); |
| aml_append(method, |
| aml_call2("DVNT", aml_name("PCIU"), aml_int(1) /* Device Check */) |
| ); |
| aml_append(method, |
| aml_call2("DVNT", aml_name("PCID"), aml_int(3)/* Eject Request */) |
| ); |
| } |
| |
| /* Notify about child bus events in any case */ |
| if (pcihp_bridge_en) { |
| QLIST_FOREACH(sec, &bus->child, sibling) { |
| int32_t devfn = sec->parent_dev->devfn; |
| |
| if (pci_bus_is_root(sec) || pci_bus_is_express(sec)) { |
| continue; |
| } |
| |
| aml_append(method, aml_name("^S%.02X.PCNT", devfn)); |
| } |
| } |
| aml_append(parent_scope, method); |
| qobject_unref(bsel); |
| } |
| |
| /** |
| * build_prt_entry: |
| * @link_name: link name for PCI route entry |
| * |
| * build AML package containing a PCI route entry for @link_name |
| */ |
| static Aml *build_prt_entry(const char *link_name) |
| { |
| Aml *a_zero = aml_int(0); |
| Aml *pkg = aml_package(4); |
| aml_append(pkg, a_zero); |
| aml_append(pkg, a_zero); |
| aml_append(pkg, aml_name("%s", link_name)); |
| aml_append(pkg, a_zero); |
| return pkg; |
| } |
| |
| /* |
| * initialize_route - Initialize the interrupt routing rule |
| * through a specific LINK: |
| * if (lnk_idx == idx) |
| * route using link 'link_name' |
| */ |
| static Aml *initialize_route(Aml *route, const char *link_name, |
| Aml *lnk_idx, int idx) |
| { |
| Aml *if_ctx = aml_if(aml_equal(lnk_idx, aml_int(idx))); |
| Aml *pkg = build_prt_entry(link_name); |
| |
| aml_append(if_ctx, aml_store(pkg, route)); |
| |
| return if_ctx; |
| } |
| |
| /* |
| * build_prt - Define interrupt rounting rules |
| * |
| * Returns an array of 128 routes, one for each device, |
| * based on device location. |
| * The main goal is to equaly distribute the interrupts |
| * over the 4 existing ACPI links (works only for i440fx). |
| * The hash function is (slot + pin) & 3 -> "LNK[D|A|B|C]". |
| * |
| */ |
| static Aml *build_prt(bool is_pci0_prt) |
| { |
| Aml *method, *while_ctx, *pin, *res; |
| |
| method = aml_method("_PRT", 0, AML_NOTSERIALIZED); |
| res = aml_local(0); |
| pin = aml_local(1); |
| aml_append(method, aml_store(aml_package(128), res)); |
| aml_append(method, aml_store(aml_int(0), pin)); |
| |
| /* while (pin < 128) */ |
| while_ctx = aml_while(aml_lless(pin, aml_int(128))); |
| { |
| Aml *slot = aml_local(2); |
| Aml *lnk_idx = aml_local(3); |
| Aml *route = aml_local(4); |
| |
| /* slot = pin >> 2 */ |
| aml_append(while_ctx, |
| aml_store(aml_shiftright(pin, aml_int(2), NULL), slot)); |
| /* lnk_idx = (slot + pin) & 3 */ |
| aml_append(while_ctx, |
| aml_store(aml_and(aml_add(pin, slot, NULL), aml_int(3), NULL), |
| lnk_idx)); |
| |
| /* route[2] = "LNK[D|A|B|C]", selection based on pin % 3 */ |
| aml_append(while_ctx, initialize_route(route, "LNKD", lnk_idx, 0)); |
| if (is_pci0_prt) { |
| Aml *if_device_1, *if_pin_4, *else_pin_4; |
| |
| /* device 1 is the power-management device, needs SCI */ |
| if_device_1 = aml_if(aml_equal(lnk_idx, aml_int(1))); |
| { |
| if_pin_4 = aml_if(aml_equal(pin, aml_int(4))); |
| { |
| aml_append(if_pin_4, |
| aml_store(build_prt_entry("LNKS"), route)); |
| } |
| aml_append(if_device_1, if_pin_4); |
| else_pin_4 = aml_else(); |
| { |
| aml_append(else_pin_4, |
| aml_store(build_prt_entry("LNKA"), route)); |
| } |
| aml_append(if_device_1, else_pin_4); |
| } |
| aml_append(while_ctx, if_device_1); |
| } else { |
| aml_append(while_ctx, initialize_route(route, "LNKA", lnk_idx, 1)); |
| } |
| aml_append(while_ctx, initialize_route(route, "LNKB", lnk_idx, 2)); |
| aml_append(while_ctx, initialize_route(route, "LNKC", lnk_idx, 3)); |
| |
| /* route[0] = 0x[slot]FFFF */ |
| aml_append(while_ctx, |
| aml_store(aml_or(aml_shiftleft(slot, aml_int(16)), aml_int(0xFFFF), |
| NULL), |
| aml_index(route, aml_int(0)))); |
| /* route[1] = pin & 3 */ |
| aml_append(while_ctx, |
| aml_store(aml_and(pin, aml_int(3), NULL), |
| aml_index(route, aml_int(1)))); |
| /* res[pin] = route */ |
| aml_append(while_ctx, aml_store(route, aml_index(res, pin))); |
| /* pin++ */ |
| aml_append(while_ctx, aml_increment(pin)); |
| } |
| aml_append(method, while_ctx); |
| /* return res*/ |
| aml_append(method, aml_return(res)); |
| |
| return method; |
| } |
| |
| typedef struct CrsRangeEntry { |
| uint64_t base; |
| uint64_t limit; |
| } CrsRangeEntry; |
| |
| static void crs_range_insert(GPtrArray *ranges, uint64_t base, uint64_t limit) |
| { |
| CrsRangeEntry *entry; |
| |
| entry = g_malloc(sizeof(*entry)); |
| entry->base = base; |
| entry->limit = limit; |
| |
| g_ptr_array_add(ranges, entry); |
| } |
| |
| static void crs_range_free(gpointer data) |
| { |
| CrsRangeEntry *entry = (CrsRangeEntry *)data; |
| g_free(entry); |
| } |
| |
| typedef struct CrsRangeSet { |
| GPtrArray *io_ranges; |
| GPtrArray *mem_ranges; |
| GPtrArray *mem_64bit_ranges; |
| } CrsRangeSet; |
| |
| static void crs_range_set_init(CrsRangeSet *range_set) |
| { |
| range_set->io_ranges = g_ptr_array_new_with_free_func(crs_range_free); |
| range_set->mem_ranges = g_ptr_array_new_with_free_func(crs_range_free); |
| range_set->mem_64bit_ranges = |
| g_ptr_array_new_with_free_func(crs_range_free); |
| } |
| |
| static void crs_range_set_free(CrsRangeSet *range_set) |
| { |
| g_ptr_array_free(range_set->io_ranges, true); |
| g_ptr_array_free(range_set->mem_ranges, true); |
| g_ptr_array_free(range_set->mem_64bit_ranges, true); |
| } |
| |
| static gint crs_range_compare(gconstpointer a, gconstpointer b) |
| { |
| CrsRangeEntry *entry_a = *(CrsRangeEntry **)a; |
| CrsRangeEntry *entry_b = *(CrsRangeEntry **)b; |
| |
| return (int64_t)entry_a->base - (int64_t)entry_b->base; |
| } |
| |
| /* |
| * crs_replace_with_free_ranges - given the 'used' ranges within [start - end] |
| * interval, computes the 'free' ranges from the same interval. |
| * Example: If the input array is { [a1 - a2],[b1 - b2] }, the function |
| * will return { [base - a1], [a2 - b1], [b2 - limit] }. |
| */ |
| static void crs_replace_with_free_ranges(GPtrArray *ranges, |
| uint64_t start, uint64_t end) |
| { |
| GPtrArray *free_ranges = g_ptr_array_new(); |
| uint64_t free_base = start; |
| int i; |
| |
| g_ptr_array_sort(ranges, crs_range_compare); |
| for (i = 0; i < ranges->len; i++) { |
| CrsRangeEntry *used = g_ptr_array_index(ranges, i); |
| |
| if (free_base < used->base) { |
| crs_range_insert(free_ranges, free_base, used->base - 1); |
| } |
| |
| free_base = used->limit + 1; |
| } |
| |
| if (free_base < end) { |
| crs_range_insert(free_ranges, free_base, end); |
| } |
| |
| g_ptr_array_set_size(ranges, 0); |
| for (i = 0; i < free_ranges->len; i++) { |
| g_ptr_array_add(ranges, g_ptr_array_index(free_ranges, i)); |
| } |
| |
| g_ptr_array_free(free_ranges, true); |
| } |
| |
| /* |
| * crs_range_merge - merges adjacent ranges in the given array. |
| * Array elements are deleted and replaced with the merged ranges. |
| */ |
| static void crs_range_merge(GPtrArray *range) |
| { |
| GPtrArray *tmp = g_ptr_array_new_with_free_func(crs_range_free); |
| CrsRangeEntry *entry; |
| uint64_t range_base, range_limit; |
| int i; |
| |
| if (!range->len) { |
| return; |
| } |
| |
| g_ptr_array_sort(range, crs_range_compare); |
| |
| entry = g_ptr_array_index(range, 0); |
| range_base = entry->base; |
| range_limit = entry->limit; |
| for (i = 1; i < range->len; i++) { |
| entry = g_ptr_array_index(range, i); |
| if (entry->base - 1 == range_limit) { |
| range_limit = entry->limit; |
| } else { |
| crs_range_insert(tmp, range_base, range_limit); |
| range_base = entry->base; |
| range_limit = entry->limit; |
| } |
| } |
| crs_range_insert(tmp, range_base, range_limit); |
| |
| g_ptr_array_set_size(range, 0); |
| for (i = 0; i < tmp->len; i++) { |
| entry = g_ptr_array_index(tmp, i); |
| crs_range_insert(range, entry->base, entry->limit); |
| } |
| g_ptr_array_free(tmp, true); |
| } |
| |
| static Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set) |
| { |
| Aml *crs = aml_resource_template(); |
| CrsRangeSet temp_range_set; |
| CrsRangeEntry *entry; |
| uint8_t max_bus = pci_bus_num(host->bus); |
| uint8_t type; |
| int devfn; |
| int i; |
| |
| crs_range_set_init(&temp_range_set); |
| for (devfn = 0; devfn < ARRAY_SIZE(host->bus->devices); devfn++) { |
| uint64_t range_base, range_limit; |
| PCIDevice *dev = host->bus->devices[devfn]; |
| |
| if (!dev) { |
| continue; |
| } |
| |
| for (i = 0; i < PCI_NUM_REGIONS; i++) { |
| PCIIORegion *r = &dev->io_regions[i]; |
| |
| range_base = r->addr; |
| range_limit = r->addr + r->size - 1; |
| |
| /* |
| * Work-around for old bioses |
| * that do not support multiple root buses |
| */ |
| if (!range_base || range_base > range_limit) { |
| continue; |
| } |
| |
| if (r->type & PCI_BASE_ADDRESS_SPACE_IO) { |
| crs_range_insert(temp_range_set.io_ranges, |
| range_base, range_limit); |
| } else { /* "memory" */ |
| crs_range_insert(temp_range_set.mem_ranges, |
| range_base, range_limit); |
| } |
| } |
| |
| type = dev->config[PCI_HEADER_TYPE] & ~PCI_HEADER_TYPE_MULTI_FUNCTION; |
| if (type == PCI_HEADER_TYPE_BRIDGE) { |
| uint8_t subordinate = dev->config[PCI_SUBORDINATE_BUS]; |
| if (subordinate > max_bus) { |
| max_bus = subordinate; |
| } |
| |
| range_base = pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_IO); |
| range_limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_IO); |
| |
| /* |
| * Work-around for old bioses |
| * that do not support multiple root buses |
| */ |
| if (range_base && range_base <= range_limit) { |
| crs_range_insert(temp_range_set.io_ranges, |
| range_base, range_limit); |
| } |
| |
| range_base = |
| pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_MEMORY); |
| range_limit = |
| pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_MEMORY); |
| |
| /* |
| * Work-around for old bioses |
| * that do not support multiple root buses |
| */ |
| if (range_base && range_base <= range_limit) { |
| uint64_t length = range_limit - range_base + 1; |
| if (range_limit <= UINT32_MAX && length <= UINT32_MAX) { |
| crs_range_insert(temp_range_set.mem_ranges, |
| range_base, range_limit); |
| } else { |
| crs_range_insert(temp_range_set.mem_64bit_ranges, |
| range_base, range_limit); |
| } |
| } |
| |
| range_base = |
| pci_bridge_get_base(dev, PCI_BASE_ADDRESS_MEM_PREFETCH); |
| range_limit = |
| pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_MEM_PREFETCH); |
| |
| /* |
| * Work-around for old bioses |
| * that do not support multiple root buses |
| */ |
| if (range_base && range_base <= range_limit) { |
| uint64_t length = range_limit - range_base + 1; |
| if (range_limit <= UINT32_MAX && length <= UINT32_MAX) { |
| crs_range_insert(temp_range_set.mem_ranges, |
| range_base, range_limit); |
| } else { |
| crs_range_insert(temp_range_set.mem_64bit_ranges, |
| range_base, range_limit); |
| } |
| } |
| } |
| } |
| |
| crs_range_merge(temp_range_set.io_ranges); |
| for (i = 0; i < temp_range_set.io_ranges->len; i++) { |
| entry = g_ptr_array_index(temp_range_set.io_ranges, i); |
| aml_append(crs, |
| aml_word_io(AML_MIN_FIXED, AML_MAX_FIXED, |
| AML_POS_DECODE, AML_ENTIRE_RANGE, |
| 0, entry->base, entry->limit, 0, |
| entry->limit - entry->base + 1)); |
| crs_range_insert(range_set->io_ranges, entry->base, entry->limit); |
| } |
| |
| crs_range_merge(temp_range_set.mem_ranges); |
| for (i = 0; i < temp_range_set.mem_ranges->len; i++) { |
| entry = g_ptr_array_index(temp_range_set.mem_ranges, i); |
| aml_append(crs, |
| aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED, |
| AML_MAX_FIXED, AML_NON_CACHEABLE, |
| AML_READ_WRITE, |
| 0, entry->base, entry->limit, 0, |
| entry->limit - entry->base + 1)); |
| crs_range_insert(range_set->mem_ranges, entry->base, entry->limit); |
| } |
| |
| crs_range_merge(temp_range_set.mem_64bit_ranges); |
| for (i = 0; i < temp_range_set.mem_64bit_ranges->len; i++) { |
| entry = g_ptr_array_index(temp_range_set.mem_64bit_ranges, i); |
| aml_append(crs, |
| aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, |
| AML_MAX_FIXED, AML_NON_CACHEABLE, |
| AML_READ_WRITE, |
| 0, entry->base, entry->limit, 0, |
| entry->limit - entry->base + 1)); |
| crs_range_insert(range_set->mem_64bit_ranges, |
| entry->base, entry->limit); |
| } |
| |
| crs_range_set_free(&temp_range_set); |
| |
| aml_append(crs, |
| aml_word_bus_number(AML_MIN_FIXED, AML_MAX_FIXED, AML_POS_DECODE, |
| 0, |
| pci_bus_num(host->bus), |
| max_bus, |
| 0, |
| max_bus - pci_bus_num(host->bus) + 1)); |
| |
| return crs; |
| } |
| |
| static void build_hpet_aml(Aml *table) |
| { |
| Aml *crs; |
| Aml *field; |
| Aml *method; |
| Aml *if_ctx; |
| Aml *scope = aml_scope("_SB"); |
| Aml *dev = aml_device("HPET"); |
| Aml *zero = aml_int(0); |
| Aml *id = aml_local(0); |
| Aml *period = aml_local(1); |
| |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0103"))); |
| aml_append(dev, aml_name_decl("_UID", zero)); |
| |
| aml_append(dev, |
| aml_operation_region("HPTM", AML_SYSTEM_MEMORY, aml_int(HPET_BASE), |
| HPET_LEN)); |
| field = aml_field("HPTM", AML_DWORD_ACC, AML_LOCK, AML_PRESERVE); |
| aml_append(field, aml_named_field("VEND", 32)); |
| aml_append(field, aml_named_field("PRD", 32)); |
| aml_append(dev, field); |
| |
| method = aml_method("_STA", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_store(aml_name("VEND"), id)); |
| aml_append(method, aml_store(aml_name("PRD"), period)); |
| aml_append(method, aml_shiftright(id, aml_int(16), id)); |
| if_ctx = aml_if(aml_lor(aml_equal(id, zero), |
| aml_equal(id, aml_int(0xffff)))); |
| { |
| aml_append(if_ctx, aml_return(zero)); |
| } |
| aml_append(method, if_ctx); |
| |
| if_ctx = aml_if(aml_lor(aml_equal(period, zero), |
| aml_lgreater(period, aml_int(100000000)))); |
| { |
| aml_append(if_ctx, aml_return(zero)); |
| } |
| aml_append(method, if_ctx); |
| |
| aml_append(method, aml_return(aml_int(0x0F))); |
| aml_append(dev, method); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_memory32_fixed(HPET_BASE, HPET_LEN, AML_READ_ONLY)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| aml_append(scope, dev); |
| aml_append(table, scope); |
| } |
| |
| static Aml *build_fdinfo_aml(int idx, FloppyDriveType type) |
| { |
| Aml *dev, *fdi; |
| uint8_t maxc, maxh, maxs; |
| |
| isa_fdc_get_drive_max_chs(type, &maxc, &maxh, &maxs); |
| |
| dev = aml_device("FLP%c", 'A' + idx); |
| |
| aml_append(dev, aml_name_decl("_ADR", aml_int(idx))); |
| |
| fdi = aml_package(16); |
| aml_append(fdi, aml_int(idx)); /* Drive Number */ |
| aml_append(fdi, |
| aml_int(cmos_get_fd_drive_type(type))); /* Device Type */ |
| /* |
| * the values below are the limits of the drive, and are thus independent |
| * of the inserted media |
| */ |
| aml_append(fdi, aml_int(maxc)); /* Maximum Cylinder Number */ |
| aml_append(fdi, aml_int(maxs)); /* Maximum Sector Number */ |
| aml_append(fdi, aml_int(maxh)); /* Maximum Head Number */ |
| /* |
| * SeaBIOS returns the below values for int 0x13 func 0x08 regardless of |
| * the drive type, so shall we |
| */ |
| aml_append(fdi, aml_int(0xAF)); /* disk_specify_1 */ |
| aml_append(fdi, aml_int(0x02)); /* disk_specify_2 */ |
| aml_append(fdi, aml_int(0x25)); /* disk_motor_wait */ |
| aml_append(fdi, aml_int(0x02)); /* disk_sector_siz */ |
| aml_append(fdi, aml_int(0x12)); /* disk_eot */ |
| aml_append(fdi, aml_int(0x1B)); /* disk_rw_gap */ |
| aml_append(fdi, aml_int(0xFF)); /* disk_dtl */ |
| aml_append(fdi, aml_int(0x6C)); /* disk_formt_gap */ |
| aml_append(fdi, aml_int(0xF6)); /* disk_fill */ |
| aml_append(fdi, aml_int(0x0F)); /* disk_head_sttl */ |
| aml_append(fdi, aml_int(0x08)); /* disk_motor_strt */ |
| |
| aml_append(dev, aml_name_decl("_FDI", fdi)); |
| return dev; |
| } |
| |
| static Aml *build_fdc_device_aml(ISADevice *fdc) |
| { |
| int i; |
| Aml *dev; |
| Aml *crs; |
| |
| #define ACPI_FDE_MAX_FD 4 |
| uint32_t fde_buf[5] = { |
| 0, 0, 0, 0, /* presence of floppy drives #0 - #3 */ |
| cpu_to_le32(2) /* tape presence (2 == never present) */ |
| }; |
| |
| dev = aml_device("FDC0"); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0700"))); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_io(AML_DECODE16, 0x03F2, 0x03F2, 0x00, 0x04)); |
| aml_append(crs, aml_io(AML_DECODE16, 0x03F7, 0x03F7, 0x00, 0x01)); |
| aml_append(crs, aml_irq_no_flags(6)); |
| aml_append(crs, |
| aml_dma(AML_COMPATIBILITY, AML_NOTBUSMASTER, AML_TRANSFER8, 2)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| for (i = 0; i < MIN(MAX_FD, ACPI_FDE_MAX_FD); i++) { |
| FloppyDriveType type = isa_fdc_get_drive_type(fdc, i); |
| |
| if (type < FLOPPY_DRIVE_TYPE_NONE) { |
| fde_buf[i] = cpu_to_le32(1); /* drive present */ |
| aml_append(dev, build_fdinfo_aml(i, type)); |
| } |
| } |
| aml_append(dev, aml_name_decl("_FDE", |
| aml_buffer(sizeof(fde_buf), (uint8_t *)fde_buf))); |
| |
| return dev; |
| } |
| |
| static Aml *build_rtc_device_aml(void) |
| { |
| Aml *dev; |
| Aml *crs; |
| |
| dev = aml_device("RTC"); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00"))); |
| crs = aml_resource_template(); |
| aml_append(crs, aml_io(AML_DECODE16, 0x0070, 0x0070, 0x10, 0x02)); |
| aml_append(crs, aml_irq_no_flags(8)); |
| aml_append(crs, aml_io(AML_DECODE16, 0x0072, 0x0072, 0x02, 0x06)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| return dev; |
| } |
| |
| static Aml *build_kbd_device_aml(void) |
| { |
| Aml *dev; |
| Aml *crs; |
| Aml *method; |
| |
| dev = aml_device("KBD"); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0303"))); |
| |
| method = aml_method("_STA", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_int(0x0f))); |
| aml_append(dev, method); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_io(AML_DECODE16, 0x0060, 0x0060, 0x01, 0x01)); |
| aml_append(crs, aml_io(AML_DECODE16, 0x0064, 0x0064, 0x01, 0x01)); |
| aml_append(crs, aml_irq_no_flags(1)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| return dev; |
| } |
| |
| static Aml *build_mouse_device_aml(void) |
| { |
| Aml *dev; |
| Aml *crs; |
| Aml *method; |
| |
| dev = aml_device("MOU"); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0F13"))); |
| |
| method = aml_method("_STA", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_int(0x0f))); |
| aml_append(dev, method); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_irq_no_flags(12)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| return dev; |
| } |
| |
| static Aml *build_lpt_device_aml(void) |
| { |
| Aml *dev; |
| Aml *crs; |
| Aml *method; |
| Aml *if_ctx; |
| Aml *else_ctx; |
| Aml *zero = aml_int(0); |
| Aml *is_present = aml_local(0); |
| |
| dev = aml_device("LPT"); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400"))); |
| |
| method = aml_method("_STA", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_store(aml_name("LPEN"), is_present)); |
| if_ctx = aml_if(aml_equal(is_present, zero)); |
| { |
| aml_append(if_ctx, aml_return(aml_int(0x00))); |
| } |
| aml_append(method, if_ctx); |
| else_ctx = aml_else(); |
| { |
| aml_append(else_ctx, aml_return(aml_int(0x0f))); |
| } |
| aml_append(method, else_ctx); |
| aml_append(dev, method); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_io(AML_DECODE16, 0x0378, 0x0378, 0x08, 0x08)); |
| aml_append(crs, aml_irq_no_flags(7)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| return dev; |
| } |
| |
| static Aml *build_com_device_aml(uint8_t uid) |
| { |
| Aml *dev; |
| Aml *crs; |
| Aml *method; |
| Aml *if_ctx; |
| Aml *else_ctx; |
| Aml *zero = aml_int(0); |
| Aml *is_present = aml_local(0); |
| const char *enabled_field = "CAEN"; |
| uint8_t irq = 4; |
| uint16_t io_port = 0x03F8; |
| |
| assert(uid == 1 || uid == 2); |
| if (uid == 2) { |
| enabled_field = "CBEN"; |
| irq = 3; |
| io_port = 0x02F8; |
| } |
| |
| dev = aml_device("COM%d", uid); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0501"))); |
| aml_append(dev, aml_name_decl("_UID", aml_int(uid))); |
| |
| method = aml_method("_STA", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_store(aml_name("%s", enabled_field), is_present)); |
| if_ctx = aml_if(aml_equal(is_present, zero)); |
| { |
| aml_append(if_ctx, aml_return(aml_int(0x00))); |
| } |
| aml_append(method, if_ctx); |
| else_ctx = aml_else(); |
| { |
| aml_append(else_ctx, aml_return(aml_int(0x0f))); |
| } |
| aml_append(method, else_ctx); |
| aml_append(dev, method); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_io(AML_DECODE16, io_port, io_port, 0x00, 0x08)); |
| aml_append(crs, aml_irq_no_flags(irq)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| return dev; |
| } |
| |
| static void build_isa_devices_aml(Aml *table) |
| { |
| ISADevice *fdc = pc_find_fdc0(); |
| bool ambiguous; |
| |
| Aml *scope = aml_scope("_SB.PCI0.ISA"); |
| Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous); |
| |
| aml_append(scope, build_rtc_device_aml()); |
| aml_append(scope, build_kbd_device_aml()); |
| aml_append(scope, build_mouse_device_aml()); |
| if (fdc) { |
| aml_append(scope, build_fdc_device_aml(fdc)); |
| } |
| aml_append(scope, build_lpt_device_aml()); |
| aml_append(scope, build_com_device_aml(1)); |
| aml_append(scope, build_com_device_aml(2)); |
| |
| if (ambiguous) { |
| error_report("Multiple ISA busses, unable to define IPMI ACPI data"); |
| } else if (!obj) { |
| error_report("No ISA bus, unable to define IPMI ACPI data"); |
| } else { |
| build_acpi_ipmi_devices(scope, BUS(obj)); |
| } |
| |
| aml_append(table, scope); |
| } |
| |
| static void build_dbg_aml(Aml *table) |
| { |
| Aml *field; |
| Aml *method; |
| Aml *while_ctx; |
| Aml *scope = aml_scope("\\"); |
| Aml *buf = aml_local(0); |
| Aml *len = aml_local(1); |
| Aml *idx = aml_local(2); |
| |
| aml_append(scope, |
| aml_operation_region("DBG", AML_SYSTEM_IO, aml_int(0x0402), 0x01)); |
| field = aml_field("DBG", AML_BYTE_ACC, AML_NOLOCK, AML_PRESERVE); |
| aml_append(field, aml_named_field("DBGB", 8)); |
| aml_append(scope, field); |
| |
| method = aml_method("DBUG", 1, AML_NOTSERIALIZED); |
| |
| aml_append(method, aml_to_hexstring(aml_arg(0), buf)); |
| aml_append(method, aml_to_buffer(buf, buf)); |
| aml_append(method, aml_subtract(aml_sizeof(buf), aml_int(1), len)); |
| aml_append(method, aml_store(aml_int(0), idx)); |
| |
| while_ctx = aml_while(aml_lless(idx, len)); |
| aml_append(while_ctx, |
| aml_store(aml_derefof(aml_index(buf, idx)), aml_name("DBGB"))); |
| aml_append(while_ctx, aml_increment(idx)); |
| aml_append(method, while_ctx); |
| |
| aml_append(method, aml_store(aml_int(0x0A), aml_name("DBGB"))); |
| aml_append(scope, method); |
| |
| aml_append(table, scope); |
| } |
| |
| static Aml *build_link_dev(const char *name, uint8_t uid, Aml *reg) |
| { |
| Aml *dev; |
| Aml *crs; |
| Aml *method; |
| uint32_t irqs[] = {5, 10, 11}; |
| |
| dev = aml_device("%s", name); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C0F"))); |
| aml_append(dev, aml_name_decl("_UID", aml_int(uid))); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH, |
| AML_SHARED, irqs, ARRAY_SIZE(irqs))); |
| aml_append(dev, aml_name_decl("_PRS", crs)); |
| |
| method = aml_method("_STA", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_call1("IQST", reg))); |
| aml_append(dev, method); |
| |
| method = aml_method("_DIS", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_or(reg, aml_int(0x80), reg)); |
| aml_append(dev, method); |
| |
| method = aml_method("_CRS", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_call1("IQCR", reg))); |
| aml_append(dev, method); |
| |
| method = aml_method("_SRS", 1, AML_NOTSERIALIZED); |
| aml_append(method, aml_create_dword_field(aml_arg(0), aml_int(5), "PRRI")); |
| aml_append(method, aml_store(aml_name("PRRI"), reg)); |
| aml_append(dev, method); |
| |
| return dev; |
| } |
| |
| static Aml *build_gsi_link_dev(const char *name, uint8_t uid, uint8_t gsi) |
| { |
| Aml *dev; |
| Aml *crs; |
| Aml *method; |
| uint32_t irqs; |
| |
| dev = aml_device("%s", name); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C0F"))); |
| aml_append(dev, aml_name_decl("_UID", aml_int(uid))); |
| |
| crs = aml_resource_template(); |
| irqs = gsi; |
| aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH, |
| AML_SHARED, &irqs, 1)); |
| aml_append(dev, aml_name_decl("_PRS", crs)); |
| |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| /* |
| * _DIS can be no-op because the interrupt cannot be disabled. |
| */ |
| method = aml_method("_DIS", 0, AML_NOTSERIALIZED); |
| aml_append(dev, method); |
| |
| method = aml_method("_SRS", 1, AML_NOTSERIALIZED); |
| aml_append(dev, method); |
| |
| return dev; |
| } |
| |
| /* _CRS method - get current settings */ |
| static Aml *build_iqcr_method(bool is_piix4) |
| { |
| Aml *if_ctx; |
| uint32_t irqs; |
| Aml *method = aml_method("IQCR", 1, AML_SERIALIZED); |
| Aml *crs = aml_resource_template(); |
| |
| irqs = 0; |
| aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, |
| AML_ACTIVE_HIGH, AML_SHARED, &irqs, 1)); |
| aml_append(method, aml_name_decl("PRR0", crs)); |
| |
| aml_append(method, |
| aml_create_dword_field(aml_name("PRR0"), aml_int(5), "PRRI")); |
| |
| if (is_piix4) { |
| if_ctx = aml_if(aml_lless(aml_arg(0), aml_int(0x80))); |
| aml_append(if_ctx, aml_store(aml_arg(0), aml_name("PRRI"))); |
| aml_append(method, if_ctx); |
| } else { |
| aml_append(method, |
| aml_store(aml_and(aml_arg(0), aml_int(0xF), NULL), |
| aml_name("PRRI"))); |
| } |
| |
| aml_append(method, aml_return(aml_name("PRR0"))); |
| return method; |
| } |
| |
| /* _STA method - get status */ |
| static Aml *build_irq_status_method(void) |
| { |
| Aml *if_ctx; |
| Aml *method = aml_method("IQST", 1, AML_NOTSERIALIZED); |
| |
| if_ctx = aml_if(aml_and(aml_int(0x80), aml_arg(0), NULL)); |
| aml_append(if_ctx, aml_return(aml_int(0x09))); |
| aml_append(method, if_ctx); |
| aml_append(method, aml_return(aml_int(0x0B))); |
| return method; |
| } |
| |
| static void build_piix4_pci0_int(Aml *table) |
| { |
| Aml *dev; |
| Aml *crs; |
| Aml *field; |
| Aml *method; |
| uint32_t irqs; |
| Aml *sb_scope = aml_scope("_SB"); |
| Aml *pci0_scope = aml_scope("PCI0"); |
| |
| aml_append(pci0_scope, build_prt(true)); |
| aml_append(sb_scope, pci0_scope); |
| |
| field = aml_field("PCI0.ISA.P40C", AML_BYTE_ACC, AML_NOLOCK, AML_PRESERVE); |
| aml_append(field, aml_named_field("PRQ0", 8)); |
| aml_append(field, aml_named_field("PRQ1", 8)); |
| aml_append(field, aml_named_field("PRQ2", 8)); |
| aml_append(field, aml_named_field("PRQ3", 8)); |
| aml_append(sb_scope, field); |
| |
| aml_append(sb_scope, build_irq_status_method()); |
| aml_append(sb_scope, build_iqcr_method(true)); |
| |
| aml_append(sb_scope, build_link_dev("LNKA", 0, aml_name("PRQ0"))); |
| aml_append(sb_scope, build_link_dev("LNKB", 1, aml_name("PRQ1"))); |
| aml_append(sb_scope, build_link_dev("LNKC", 2, aml_name("PRQ2"))); |
| aml_append(sb_scope, build_link_dev("LNKD", 3, aml_name("PRQ3"))); |
| |
| dev = aml_device("LNKS"); |
| { |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C0F"))); |
| aml_append(dev, aml_name_decl("_UID", aml_int(4))); |
| |
| crs = aml_resource_template(); |
| irqs = 9; |
| aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, |
| AML_ACTIVE_HIGH, AML_SHARED, |
| &irqs, 1)); |
| aml_append(dev, aml_name_decl("_PRS", crs)); |
| |
| /* The SCI cannot be disabled and is always attached to GSI 9, |
| * so these are no-ops. We only need this link to override the |
| * polarity to active high and match the content of the MADT. |
| */ |
| method = aml_method("_STA", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_int(0x0b))); |
| aml_append(dev, method); |
| |
| method = aml_method("_DIS", 0, AML_NOTSERIALIZED); |
| aml_append(dev, method); |
| |
| method = aml_method("_CRS", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_name("_PRS"))); |
| aml_append(dev, method); |
| |
| method = aml_method("_SRS", 1, AML_NOTSERIALIZED); |
| aml_append(dev, method); |
| } |
| aml_append(sb_scope, dev); |
| |
| aml_append(table, sb_scope); |
| } |
| |
| static void append_q35_prt_entry(Aml *ctx, uint32_t nr, const char *name) |
| { |
| int i; |
| int head; |
| Aml *pkg; |
| char base = name[3] < 'E' ? 'A' : 'E'; |
| char *s = g_strdup(name); |
| Aml *a_nr = aml_int((nr << 16) | 0xffff); |
| |
| assert(strlen(s) == 4); |
| |
| head = name[3] - base; |
| for (i = 0; i < 4; i++) { |
| if (head + i > 3) { |
| head = i * -1; |
| } |
| s[3] = base + head + i; |
| pkg = aml_package(4); |
| aml_append(pkg, a_nr); |
| aml_append(pkg, aml_int(i)); |
| aml_append(pkg, aml_name("%s", s)); |
| aml_append(pkg, aml_int(0)); |
| aml_append(ctx, pkg); |
| } |
| g_free(s); |
| } |
| |
| static Aml *build_q35_routing_table(const char *str) |
| { |
| int i; |
| Aml *pkg; |
| char *name = g_strdup_printf("%s ", str); |
| |
| pkg = aml_package(128); |
| for (i = 0; i < 0x18; i++) { |
| name[3] = 'E' + (i & 0x3); |
| append_q35_prt_entry(pkg, i, name); |
| } |
| |
| name[3] = 'E'; |
| append_q35_prt_entry(pkg, 0x18, name); |
| |
| /* INTA -> PIRQA for slot 25 - 31, see the default value of D<N>IR */ |
| for (i = 0x0019; i < 0x1e; i++) { |
| name[3] = 'A'; |
| append_q35_prt_entry(pkg, i, name); |
| } |
| |
| /* PCIe->PCI bridge. use PIRQ[E-H] */ |
| name[3] = 'E'; |
| append_q35_prt_entry(pkg, 0x1e, name); |
| name[3] = 'A'; |
| append_q35_prt_entry(pkg, 0x1f, name); |
| |
| g_free(name); |
| return pkg; |
| } |
| |
| static void build_q35_pci0_int(Aml *table) |
| { |
| Aml *field; |
| Aml *method; |
| Aml *sb_scope = aml_scope("_SB"); |
| Aml *pci0_scope = aml_scope("PCI0"); |
| |
| /* Zero => PIC mode, One => APIC Mode */ |
| aml_append(table, aml_name_decl("PICF", aml_int(0))); |
| method = aml_method("_PIC", 1, AML_NOTSERIALIZED); |
| { |
| aml_append(method, aml_store(aml_arg(0), aml_name("PICF"))); |
| } |
| aml_append(table, method); |
| |
| aml_append(pci0_scope, |
| aml_name_decl("PRTP", build_q35_routing_table("LNK"))); |
| aml_append(pci0_scope, |
| aml_name_decl("PRTA", build_q35_routing_table("GSI"))); |
| |
| method = aml_method("_PRT", 0, AML_NOTSERIALIZED); |
| { |
| Aml *if_ctx; |
| Aml *else_ctx; |
| |
| /* PCI IRQ routing table, example from ACPI 2.0a specification, |
| section 6.2.8.1 */ |
| /* Note: we provide the same info as the PCI routing |
| table of the Bochs BIOS */ |
| if_ctx = aml_if(aml_equal(aml_name("PICF"), aml_int(0))); |
| aml_append(if_ctx, aml_return(aml_name("PRTP"))); |
| aml_append(method, if_ctx); |
| else_ctx = aml_else(); |
| aml_append(else_ctx, aml_return(aml_name("PRTA"))); |
| aml_append(method, else_ctx); |
| } |
| aml_append(pci0_scope, method); |
| aml_append(sb_scope, pci0_scope); |
| |
| field = aml_field("PCI0.ISA.PIRQ", AML_BYTE_ACC, AML_NOLOCK, AML_PRESERVE); |
| aml_append(field, aml_named_field("PRQA", 8)); |
| aml_append(field, aml_named_field("PRQB", 8)); |
| aml_append(field, aml_named_field("PRQC", 8)); |
| aml_append(field, aml_named_field("PRQD", 8)); |
| aml_append(field, aml_reserved_field(0x20)); |
| aml_append(field, aml_named_field("PRQE", 8)); |
| aml_append(field, aml_named_field("PRQF", 8)); |
| aml_append(field, aml_named_field("PRQG", 8)); |
| aml_append(field, aml_named_field("PRQH", 8)); |
| aml_append(sb_scope, field); |
| |
| aml_append(sb_scope, build_irq_status_method()); |
| aml_append(sb_scope, build_iqcr_method(false)); |
| |
| aml_append(sb_scope, build_link_dev("LNKA", 0, aml_name("PRQA"))); |
| aml_append(sb_scope, build_link_dev("LNKB", 1, aml_name("PRQB"))); |
| aml_append(sb_scope, build_link_dev("LNKC", 2, aml_name("PRQC"))); |
| aml_append(sb_scope, build_link_dev("LNKD", 3, aml_name("PRQD"))); |
| aml_append(sb_scope, build_link_dev("LNKE", 4, aml_name("PRQE"))); |
| aml_append(sb_scope, build_link_dev("LNKF", 5, aml_name("PRQF"))); |
| aml_append(sb_scope, build_link_dev("LNKG", 6, aml_name("PRQG"))); |
| aml_append(sb_scope, build_link_dev("LNKH", 7, aml_name("PRQH"))); |
| |
| aml_append(sb_scope, build_gsi_link_dev("GSIA", 0x10, 0x10)); |
| aml_append(sb_scope, build_gsi_link_dev("GSIB", 0x11, 0x11)); |
| aml_append(sb_scope, build_gsi_link_dev("GSIC", 0x12, 0x12)); |
| aml_append(sb_scope, build_gsi_link_dev("GSID", 0x13, 0x13)); |
| aml_append(sb_scope, build_gsi_link_dev("GSIE", 0x14, 0x14)); |
| aml_append(sb_scope, build_gsi_link_dev("GSIF", 0x15, 0x15)); |
| aml_append(sb_scope, build_gsi_link_dev("GSIG", 0x16, 0x16)); |
| aml_append(sb_scope, build_gsi_link_dev("GSIH", 0x17, 0x17)); |
| |
| aml_append(table, sb_scope); |
| } |
| |
| static void build_q35_isa_bridge(Aml *table) |
| { |
| Aml *dev; |
| Aml *scope; |
| Aml *field; |
| |
| scope = aml_scope("_SB.PCI0"); |
| dev = aml_device("ISA"); |
| aml_append(dev, aml_name_decl("_ADR", aml_int(0x001F0000))); |
| |
| /* ICH9 PCI to ISA irq remapping */ |
| aml_append(dev, aml_operation_region("PIRQ", AML_PCI_CONFIG, |
| aml_int(0x60), 0x0C)); |
| |
| aml_append(dev, aml_operation_region("LPCD", AML_PCI_CONFIG, |
| aml_int(0x80), 0x02)); |
| field = aml_field("LPCD", AML_ANY_ACC, AML_NOLOCK, AML_PRESERVE); |
| aml_append(field, aml_named_field("COMA", 3)); |
| aml_append(field, aml_reserved_field(1)); |
| aml_append(field, aml_named_field("COMB", 3)); |
| aml_append(field, aml_reserved_field(1)); |
| aml_append(field, aml_named_field("LPTD", 2)); |
| aml_append(dev, field); |
| |
| aml_append(dev, aml_operation_region("LPCE", AML_PCI_CONFIG, |
| aml_int(0x82), 0x02)); |
| /* enable bits */ |
| field = aml_field("LPCE", AML_ANY_ACC, AML_NOLOCK, AML_PRESERVE); |
| aml_append(field, aml_named_field("CAEN", 1)); |
| aml_append(field, aml_named_field("CBEN", 1)); |
| aml_append(field, aml_named_field("LPEN", 1)); |
| aml_append(dev, field); |
| |
| aml_append(scope, dev); |
| aml_append(table, scope); |
| } |
| |
| static void build_piix4_pm(Aml *table) |
| { |
| Aml *dev; |
| Aml *scope; |
| |
| scope = aml_scope("_SB.PCI0"); |
| dev = aml_device("PX13"); |
| aml_append(dev, aml_name_decl("_ADR", aml_int(0x00010003))); |
| |
| aml_append(dev, aml_operation_region("P13C", AML_PCI_CONFIG, |
| aml_int(0x00), 0xff)); |
| aml_append(scope, dev); |
| aml_append(table, scope); |
| } |
| |
| static void build_piix4_isa_bridge(Aml *table) |
| { |
| Aml *dev; |
| Aml *scope; |
| Aml *field; |
| |
| scope = aml_scope("_SB.PCI0"); |
| dev = aml_device("ISA"); |
| aml_append(dev, aml_name_decl("_ADR", aml_int(0x00010000))); |
| |
| /* PIIX PCI to ISA irq remapping */ |
| aml_append(dev, aml_operation_region("P40C", AML_PCI_CONFIG, |
| aml_int(0x60), 0x04)); |
| /* enable bits */ |
| field = aml_field("^PX13.P13C", AML_ANY_ACC, AML_NOLOCK, AML_PRESERVE); |
| /* Offset(0x5f),, 7, */ |
| aml_append(field, aml_reserved_field(0x2f8)); |
| aml_append(field, aml_reserved_field(7)); |
| aml_append(field, aml_named_field("LPEN", 1)); |
| /* Offset(0x67),, 3, */ |
| aml_append(field, aml_reserved_field(0x38)); |
| aml_append(field, aml_reserved_field(3)); |
| aml_append(field, aml_named_field("CAEN", 1)); |
| aml_append(field, aml_reserved_field(3)); |
| aml_append(field, aml_named_field("CBEN", 1)); |
| aml_append(dev, field); |
| |
| aml_append(scope, dev); |
| aml_append(table, scope); |
| } |
| |
| static void build_piix4_pci_hotplug(Aml *table) |
| { |
| Aml *scope; |
| Aml *field; |
| Aml *method; |
| |
| scope = aml_scope("_SB.PCI0"); |
| |
| aml_append(scope, |
| aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(0xae00), 0x08)); |
| field = aml_field("PCST", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); |
| aml_append(field, aml_named_field("PCIU", 32)); |
| aml_append(field, aml_named_field("PCID", 32)); |
| aml_append(scope, field); |
| |
| aml_append(scope, |
| aml_operation_region("SEJ", AML_SYSTEM_IO, aml_int(0xae08), 0x04)); |
| field = aml_field("SEJ", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); |
| aml_append(field, aml_named_field("B0EJ", 32)); |
| aml_append(scope, field); |
| |
| aml_append(scope, |
| aml_operation_region("BNMR", AML_SYSTEM_IO, aml_int(0xae10), 0x04)); |
| field = aml_field("BNMR", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); |
| aml_append(field, aml_named_field("BNUM", 32)); |
| aml_append(scope, field); |
| |
| aml_append(scope, aml_mutex("BLCK", 0)); |
| |
| method = aml_method("PCEJ", 2, AML_NOTSERIALIZED); |
| aml_append(method, aml_acquire(aml_name("BLCK"), 0xFFFF)); |
| aml_append(method, aml_store(aml_arg(0), aml_name("BNUM"))); |
| aml_append(method, |
| aml_store(aml_shiftleft(aml_int(1), aml_arg(1)), aml_name("B0EJ"))); |
| aml_append(method, aml_release(aml_name("BLCK"))); |
| aml_append(method, aml_return(aml_int(0))); |
| aml_append(scope, method); |
| |
| aml_append(table, scope); |
| } |
| |
| static Aml *build_q35_osc_method(void) |
| { |
| Aml *if_ctx; |
| Aml *if_ctx2; |
| Aml *else_ctx; |
| Aml *method; |
| Aml *a_cwd1 = aml_name("CDW1"); |
| Aml *a_ctrl = aml_local(0); |
| |
| method = aml_method("_OSC", 4, AML_NOTSERIALIZED); |
| aml_append(method, aml_create_dword_field(aml_arg(3), aml_int(0), "CDW1")); |
| |
| if_ctx = aml_if(aml_equal( |
| aml_arg(0), aml_touuid("33DB4D5B-1FF7-401C-9657-7441C03DD766"))); |
| aml_append(if_ctx, aml_create_dword_field(aml_arg(3), aml_int(4), "CDW2")); |
| aml_append(if_ctx, aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3")); |
| |
| aml_append(if_ctx, aml_store(aml_name("CDW3"), a_ctrl)); |
| |
| /* |
| * Always allow native PME, AER (no dependencies) |
| * Allow SHPC (PCI bridges can have SHPC controller) |
| */ |
| aml_append(if_ctx, aml_and(a_ctrl, aml_int(0x1F), a_ctrl)); |
| |
| if_ctx2 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(1)))); |
| /* Unknown revision */ |
| aml_append(if_ctx2, aml_or(a_cwd1, aml_int(0x08), a_cwd1)); |
| aml_append(if_ctx, if_ctx2); |
| |
| if_ctx2 = aml_if(aml_lnot(aml_equal(aml_name("CDW3"), a_ctrl))); |
| /* Capabilities bits were masked */ |
| aml_append(if_ctx2, aml_or(a_cwd1, aml_int(0x10), a_cwd1)); |
| aml_append(if_ctx, if_ctx2); |
| |
| /* Update DWORD3 in the buffer */ |
| aml_append(if_ctx, aml_store(a_ctrl, aml_name("CDW3"))); |
| aml_append(method, if_ctx); |
| |
| else_ctx = aml_else(); |
| /* Unrecognized UUID */ |
| aml_append(else_ctx, aml_or(a_cwd1, aml_int(4), a_cwd1)); |
| aml_append(method, else_ctx); |
| |
| aml_append(method, aml_return(aml_arg(3))); |
| return method; |
| } |
| |
| static void |
| build_dsdt(GArray *table_data, BIOSLinker *linker, |
| AcpiPmInfo *pm, AcpiMiscInfo *misc, |
| Range *pci_hole, Range *pci_hole64, MachineState *machine) |
| { |
| CrsRangeEntry *entry; |
| Aml *dsdt, *sb_scope, *scope, *dev, *method, *field, *pkg, *crs; |
| CrsRangeSet crs_range_set; |
| PCMachineState *pcms = PC_MACHINE(machine); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(machine); |
| uint32_t nr_mem = machine->ram_slots; |
| int root_bus_limit = 0xFF; |
| PCIBus *bus = NULL; |
| TPMIf *tpm = tpm_find(); |
| int i; |
| |
| dsdt = init_aml_allocator(); |
| |
| /* Reserve space for header */ |
| acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader)); |
| |
| build_dbg_aml(dsdt); |
| if (misc->is_piix4) { |
| sb_scope = aml_scope("_SB"); |
| dev = aml_device("PCI0"); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03"))); |
| aml_append(dev, aml_name_decl("_ADR", aml_int(0))); |
| aml_append(dev, aml_name_decl("_UID", aml_int(1))); |
| aml_append(sb_scope, dev); |
| aml_append(dsdt, sb_scope); |
| |
| build_hpet_aml(dsdt); |
| build_piix4_pm(dsdt); |
| build_piix4_isa_bridge(dsdt); |
| build_isa_devices_aml(dsdt); |
| build_piix4_pci_hotplug(dsdt); |
| build_piix4_pci0_int(dsdt); |
| } else { |
| sb_scope = aml_scope("_SB"); |
| dev = aml_device("PCI0"); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08"))); |
| aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03"))); |
| aml_append(dev, aml_name_decl("_ADR", aml_int(0))); |
| aml_append(dev, aml_name_decl("_UID", aml_int(1))); |
| aml_append(dev, build_q35_osc_method()); |
| aml_append(sb_scope, dev); |
| aml_append(dsdt, sb_scope); |
| |
| build_hpet_aml(dsdt); |
| build_q35_isa_bridge(dsdt); |
| build_isa_devices_aml(dsdt); |
| build_q35_pci0_int(dsdt); |
| } |
| |
| if (pcmc->legacy_cpu_hotplug) { |
| build_legacy_cpu_hotplug_aml(dsdt, machine, pm->cpu_hp_io_base); |
| } else { |
| CPUHotplugFeatures opts = { |
| .acpi_1_compatible = true, .has_legacy_cphp = true |
| }; |
| build_cpus_aml(dsdt, machine, opts, pm->cpu_hp_io_base, |
| "\\_SB.PCI0", "\\_GPE._E02"); |
| } |
| build_memory_hotplug_aml(dsdt, nr_mem, "\\_SB.PCI0", "\\_GPE._E03"); |
| |
| scope = aml_scope("_GPE"); |
| { |
| aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); |
| |
| if (misc->is_piix4) { |
| method = aml_method("_E01", 0, AML_NOTSERIALIZED); |
| aml_append(method, |
| aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); |
| aml_append(method, aml_call0("\\_SB.PCI0.PCNT")); |
| aml_append(method, aml_release(aml_name("\\_SB.PCI0.BLCK"))); |
| aml_append(scope, method); |
| } |
| |
| if (machine->nvdimms_state->is_enabled) { |
| method = aml_method("_E04", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_notify(aml_name("\\_SB.NVDR"), |
| aml_int(0x80))); |
| aml_append(scope, method); |
| } |
| } |
| aml_append(dsdt, scope); |
| |
| crs_range_set_init(&crs_range_set); |
| bus = PC_MACHINE(machine)->bus; |
| if (bus) { |
| QLIST_FOREACH(bus, &bus->child, sibling) { |
| uint8_t bus_num = pci_bus_num(bus); |
| uint8_t numa_node = pci_bus_numa_node(bus); |
| |
| /* look only for expander root buses */ |
| if (!pci_bus_is_root(bus)) { |
| continue; |
| } |
| |
| if (bus_num < root_bus_limit) { |
| root_bus_limit = bus_num - 1; |
| } |
| |
| scope = aml_scope("\\_SB"); |
| dev = aml_device("PC%.02X", bus_num); |
| aml_append(dev, aml_name_decl("_UID", aml_int(bus_num))); |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03"))); |
| aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num))); |
| if (pci_bus_is_express(bus)) { |
| aml_append(dev, build_q35_osc_method()); |
| } |
| |
| if (numa_node != NUMA_NODE_UNASSIGNED) { |
| aml_append(dev, aml_name_decl("_PXM", aml_int(numa_node))); |
| } |
| |
| aml_append(dev, build_prt(false)); |
| crs = build_crs(PCI_HOST_BRIDGE(BUS(bus)->parent), &crs_range_set); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| aml_append(scope, dev); |
| aml_append(dsdt, scope); |
| } |
| } |
| |
| scope = aml_scope("\\_SB.PCI0"); |
| /* build PCI0._CRS */ |
| crs = aml_resource_template(); |
| aml_append(crs, |
| aml_word_bus_number(AML_MIN_FIXED, AML_MAX_FIXED, AML_POS_DECODE, |
| 0x0000, 0x0, root_bus_limit, |
| 0x0000, root_bus_limit + 1)); |
| aml_append(crs, aml_io(AML_DECODE16, 0x0CF8, 0x0CF8, 0x01, 0x08)); |
| |
| aml_append(crs, |
| aml_word_io(AML_MIN_FIXED, AML_MAX_FIXED, |
| AML_POS_DECODE, AML_ENTIRE_RANGE, |
| 0x0000, 0x0000, 0x0CF7, 0x0000, 0x0CF8)); |
| |
| crs_replace_with_free_ranges(crs_range_set.io_ranges, 0x0D00, 0xFFFF); |
| for (i = 0; i < crs_range_set.io_ranges->len; i++) { |
| entry = g_ptr_array_index(crs_range_set.io_ranges, i); |
| aml_append(crs, |
| aml_word_io(AML_MIN_FIXED, AML_MAX_FIXED, |
| AML_POS_DECODE, AML_ENTIRE_RANGE, |
| 0x0000, entry->base, entry->limit, |
| 0x0000, entry->limit - entry->base + 1)); |
| } |
| |
| aml_append(crs, |
| aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED, |
| AML_CACHEABLE, AML_READ_WRITE, |
| 0, 0x000A0000, 0x000BFFFF, 0, 0x00020000)); |
| |
| crs_replace_with_free_ranges(crs_range_set.mem_ranges, |
| range_lob(pci_hole), |
| range_upb(pci_hole)); |
| for (i = 0; i < crs_range_set.mem_ranges->len; i++) { |
| entry = g_ptr_array_index(crs_range_set.mem_ranges, i); |
| aml_append(crs, |
| aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED, |
| AML_NON_CACHEABLE, AML_READ_WRITE, |
| 0, entry->base, entry->limit, |
| 0, entry->limit - entry->base + 1)); |
| } |
| |
| if (!range_is_empty(pci_hole64)) { |
| crs_replace_with_free_ranges(crs_range_set.mem_64bit_ranges, |
| range_lob(pci_hole64), |
| range_upb(pci_hole64)); |
| for (i = 0; i < crs_range_set.mem_64bit_ranges->len; i++) { |
| entry = g_ptr_array_index(crs_range_set.mem_64bit_ranges, i); |
| aml_append(crs, |
| aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, |
| AML_MAX_FIXED, |
| AML_CACHEABLE, AML_READ_WRITE, |
| 0, entry->base, entry->limit, |
| 0, entry->limit - entry->base + 1)); |
| } |
| } |
| |
| if (TPM_IS_TIS(tpm_find())) { |
| aml_append(crs, aml_memory32_fixed(TPM_TIS_ADDR_BASE, |
| TPM_TIS_ADDR_SIZE, AML_READ_WRITE)); |
| } |
| aml_append(scope, aml_name_decl("_CRS", crs)); |
| |
| /* reserve GPE0 block resources */ |
| dev = aml_device("GPE0"); |
| aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06"))); |
| aml_append(dev, aml_name_decl("_UID", aml_string("GPE0 resources"))); |
| /* device present, functioning, decoding, not shown in UI */ |
| aml_append(dev, aml_name_decl("_STA", aml_int(0xB))); |
| crs = aml_resource_template(); |
| aml_append(crs, |
| aml_io( |
| AML_DECODE16, |
| pm->fadt.gpe0_blk.address, |
| pm->fadt.gpe0_blk.address, |
| 1, |
| pm->fadt.gpe0_blk.bit_width / 8) |
| ); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| aml_append(scope, dev); |
| |
| crs_range_set_free(&crs_range_set); |
| |
| /* reserve PCIHP resources */ |
| if (pm->pcihp_io_len) { |
| dev = aml_device("PHPR"); |
| aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06"))); |
| aml_append(dev, |
| aml_name_decl("_UID", aml_string("PCI Hotplug resources"))); |
| /* device present, functioning, decoding, not shown in UI */ |
| aml_append(dev, aml_name_decl("_STA", aml_int(0xB))); |
| crs = aml_resource_template(); |
| aml_append(crs, |
| aml_io(AML_DECODE16, pm->pcihp_io_base, pm->pcihp_io_base, 1, |
| pm->pcihp_io_len) |
| ); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| aml_append(scope, dev); |
| } |
| aml_append(dsdt, scope); |
| |
| /* create S3_ / S4_ / S5_ packages if necessary */ |
| scope = aml_scope("\\"); |
| if (!pm->s3_disabled) { |
| pkg = aml_package(4); |
| aml_append(pkg, aml_int(1)); /* PM1a_CNT.SLP_TYP */ |
| aml_append(pkg, aml_int(1)); /* PM1b_CNT.SLP_TYP, FIXME: not impl. */ |
| aml_append(pkg, aml_int(0)); /* reserved */ |
| aml_append(pkg, aml_int(0)); /* reserved */ |
| aml_append(scope, aml_name_decl("_S3", pkg)); |
| } |
| |
| if (!pm->s4_disabled) { |
| pkg = aml_package(4); |
| aml_append(pkg, aml_int(pm->s4_val)); /* PM1a_CNT.SLP_TYP */ |
| /* PM1b_CNT.SLP_TYP, FIXME: not impl. */ |
| aml_append(pkg, aml_int(pm->s4_val)); |
| aml_append(pkg, aml_int(0)); /* reserved */ |
| aml_append(pkg, aml_int(0)); /* reserved */ |
| aml_append(scope, aml_name_decl("_S4", pkg)); |
| } |
| |
| pkg = aml_package(4); |
| aml_append(pkg, aml_int(0)); /* PM1a_CNT.SLP_TYP */ |
| aml_append(pkg, aml_int(0)); /* PM1b_CNT.SLP_TYP not impl. */ |
| aml_append(pkg, aml_int(0)); /* reserved */ |
| aml_append(pkg, aml_int(0)); /* reserved */ |
| aml_append(scope, aml_name_decl("_S5", pkg)); |
| aml_append(dsdt, scope); |
| |
| /* create fw_cfg node, unconditionally */ |
| { |
| /* when using port i/o, the 8-bit data register *always* overlaps |
| * with half of the 16-bit control register. Hence, the total size |
| * of the i/o region used is FW_CFG_CTL_SIZE; when using DMA, the |
| * DMA control register is located at FW_CFG_DMA_IO_BASE + 4 */ |
| uint8_t io_size = object_property_get_bool(OBJECT(pcms->fw_cfg), |
| "dma_enabled", NULL) ? |
| ROUND_UP(FW_CFG_CTL_SIZE, 4) + sizeof(dma_addr_t) : |
| FW_CFG_CTL_SIZE; |
| |
| scope = aml_scope("\\_SB.PCI0"); |
| dev = aml_device("FWCF"); |
| |
| aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002"))); |
| |
| /* device present, functioning, decoding, not shown in UI */ |
| aml_append(dev, aml_name_decl("_STA", aml_int(0xB))); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, |
| aml_io(AML_DECODE16, FW_CFG_IO_BASE, FW_CFG_IO_BASE, 0x01, io_size) |
| ); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| aml_append(scope, dev); |
| aml_append(dsdt, scope); |
| } |
| |
| if (misc->applesmc_io_base) { |
| scope = aml_scope("\\_SB.PCI0.ISA"); |
| dev = aml_device("SMC"); |
| |
| aml_append(dev, aml_name_decl("_HID", aml_eisaid("APP0001"))); |
| /* device present, functioning, decoding, not shown in UI */ |
| aml_append(dev, aml_name_decl("_STA", aml_int(0xB))); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, |
| aml_io(AML_DECODE16, misc->applesmc_io_base, misc->applesmc_io_base, |
| 0x01, APPLESMC_MAX_DATA_LENGTH) |
| ); |
| aml_append(crs, aml_irq_no_flags(6)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| aml_append(scope, dev); |
| aml_append(dsdt, scope); |
| } |
| |
| if (misc->pvpanic_port) { |
| scope = aml_scope("\\_SB.PCI0.ISA"); |
| |
| dev = aml_device("PEVT"); |
| aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0001"))); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, |
| aml_io(AML_DECODE16, misc->pvpanic_port, misc->pvpanic_port, 1, 1) |
| ); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| aml_append(dev, aml_operation_region("PEOR", AML_SYSTEM_IO, |
| aml_int(misc->pvpanic_port), 1)); |
| field = aml_field("PEOR", AML_BYTE_ACC, AML_NOLOCK, AML_PRESERVE); |
| aml_append(field, aml_named_field("PEPT", 8)); |
| aml_append(dev, field); |
| |
| /* device present, functioning, decoding, shown in UI */ |
| aml_append(dev, aml_name_decl("_STA", aml_int(0xF))); |
| |
| method = aml_method("RDPT", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_store(aml_name("PEPT"), aml_local(0))); |
| aml_append(method, aml_return(aml_local(0))); |
| aml_append(dev, method); |
| |
| method = aml_method("WRPT", 1, AML_NOTSERIALIZED); |
| aml_append(method, aml_store(aml_arg(0), aml_name("PEPT"))); |
| aml_append(dev, method); |
| |
| aml_append(scope, dev); |
| aml_append(dsdt, scope); |
| } |
| |
| sb_scope = aml_scope("\\_SB"); |
| { |
| Object *pci_host; |
| PCIBus *bus = NULL; |
| |
| pci_host = acpi_get_i386_pci_host(); |
| if (pci_host) { |
| bus = PCI_HOST_BRIDGE(pci_host)->bus; |
| } |
| |
| if (bus) { |
| Aml *scope = aml_scope("PCI0"); |
| /* Scan all PCI buses. Generate tables to support hotplug. */ |
| build_append_pci_bus_devices(scope, bus, pm->pcihp_bridge_en); |
| |
| if (TPM_IS_TIS(tpm)) { |
| if (misc->tpm_version == TPM_VERSION_2_0) { |
| dev = aml_device("TPM"); |
| aml_append(dev, aml_name_decl("_HID", |
| aml_string("MSFT0101"))); |
| } else { |
| dev = aml_device("ISA.TPM"); |
| aml_append(dev, aml_name_decl("_HID", |
| aml_eisaid("PNP0C31"))); |
| } |
| |
| aml_append(dev, aml_name_decl("_STA", aml_int(0xF))); |
| crs = aml_resource_template(); |
| aml_append(crs, aml_memory32_fixed(TPM_TIS_ADDR_BASE, |
| TPM_TIS_ADDR_SIZE, AML_READ_WRITE)); |
| /* |
| FIXME: TPM_TIS_IRQ=5 conflicts with PNP0C0F irqs, |
| Rewrite to take IRQ from TPM device model and |
| fix default IRQ value there to use some unused IRQ |
| */ |
| /* aml_append(crs, aml_irq_no_flags(TPM_TIS_IRQ)); */ |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| tpm_build_ppi_acpi(tpm, dev); |
| |
| aml_append(scope, dev); |
| } |
| |
| aml_append(sb_scope, scope); |
| } |
| } |
| |
| if (TPM_IS_CRB(tpm)) { |
| dev = aml_device("TPM"); |
| aml_append(dev, aml_name_decl("_HID", aml_string("MSFT0101"))); |
| crs = aml_resource_template(); |
| aml_append(crs, aml_memory32_fixed(TPM_CRB_ADDR_BASE, |
| TPM_CRB_ADDR_SIZE, AML_READ_WRITE)); |
| aml_append(dev, aml_name_decl("_CRS", crs)); |
| |
| method = aml_method("_STA", 0, AML_NOTSERIALIZED); |
| aml_append(method, aml_return(aml_int(0x0f))); |
| aml_append(dev, method); |
| |
| tpm_build_ppi_acpi(tpm, dev); |
| |
| aml_append(sb_scope, dev); |
| } |
| |
| aml_append(dsdt, sb_scope); |
| |
| /* copy AML table into ACPI tables blob and patch header there */ |
| g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len); |
| build_header(linker, table_data, |
| (void *)(table_data->data + table_data->len - dsdt->buf->len), |
| "DSDT", dsdt->buf->len, 1, NULL, NULL); |
| free_aml_allocator(); |
| } |
| |
| static void |
| build_hpet(GArray *table_data, BIOSLinker *linker) |
| { |
| Acpi20Hpet *hpet; |
| |
| hpet = acpi_data_push(table_data, sizeof(*hpet)); |
| /* Note timer_block_id value must be kept in sync with value advertised by |
| * emulated hpet |
| */ |
| hpet->timer_block_id = cpu_to_le32(0x8086a201); |
| hpet->addr.address = cpu_to_le64(HPET_BASE); |
| build_header(linker, table_data, |
| (void *)hpet, "HPET", sizeof(*hpet), 1, NULL, NULL); |
| } |
| |
| static void |
| build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog) |
| { |
| Acpi20Tcpa *tcpa = acpi_data_push(table_data, sizeof *tcpa); |
| unsigned log_addr_size = sizeof(tcpa->log_area_start_address); |
| unsigned log_addr_offset = |
| (char *)&tcpa->log_area_start_address - table_data->data; |
| |
| tcpa->platform_class = cpu_to_le16(TPM_TCPA_ACPI_CLASS_CLIENT); |
| tcpa->log_area_minimum_length = cpu_to_le32(TPM_LOG_AREA_MINIMUM_SIZE); |
| acpi_data_push(tcpalog, le32_to_cpu(tcpa->log_area_minimum_length)); |
| |
| bios_linker_loader_alloc(linker, ACPI_BUILD_TPMLOG_FILE, tcpalog, 1, |
| false /* high memory */); |
| |
| /* log area start address to be filled by Guest linker */ |
| bios_linker_loader_add_pointer(linker, |
| ACPI_BUILD_TABLE_FILE, log_addr_offset, log_addr_size, |
| ACPI_BUILD_TPMLOG_FILE, 0); |
| |
| build_header(linker, table_data, |
| (void *)tcpa, "TCPA", sizeof(*tcpa), 2, NULL, NULL); |
| } |
| |
| static void |
| build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog) |
| { |
| Acpi20TPM2 *tpm2_ptr = acpi_data_push(table_data, sizeof *tpm2_ptr); |
| unsigned log_addr_size = sizeof(tpm2_ptr->log_area_start_address); |
| unsigned log_addr_offset = |
| (char *)&tpm2_ptr->log_area_start_address - table_data->data; |
| |
| tpm2_ptr->platform_class = cpu_to_le16(TPM2_ACPI_CLASS_CLIENT); |
| if (TPM_IS_TIS(tpm_find())) { |
| tpm2_ptr->control_area_address = cpu_to_le64(0); |
| tpm2_ptr->start_method = cpu_to_le32(TPM2_START_METHOD_MMIO); |
| } else if (TPM_IS_CRB(tpm_find())) { |
| tpm2_ptr->control_area_address = cpu_to_le64(TPM_CRB_ADDR_CTRL); |
| tpm2_ptr->start_method = cpu_to_le32(TPM2_START_METHOD_CRB); |
| } else { |
| g_warn_if_reached(); |
| } |
| |
| tpm2_ptr->log_area_minimum_length = |
| cpu_to_le32(TPM_LOG_AREA_MINIMUM_SIZE); |
| |
| /* log area start address to be filled by Guest linker */ |
| bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, |
| log_addr_offset, log_addr_size, |
| ACPI_BUILD_TPMLOG_FILE, 0); |
| build_header(linker, table_data, |
| (void *)tpm2_ptr, "TPM2", sizeof(*tpm2_ptr), 4, NULL, NULL); |
| } |
| |
| #define HOLE_640K_START (640 * KiB) |
| #define HOLE_640K_END (1 * MiB) |
| |
| static void |
| build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) |
| { |
| AcpiSystemResourceAffinityTable *srat; |
| AcpiSratMemoryAffinity *numamem; |
| |
| int i; |
| int srat_start, numa_start, slots; |
| uint64_t mem_len, mem_base, next_base; |
| MachineClass *mc = MACHINE_GET_CLASS(machine); |
| const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(machine); |
| PCMachineState *pcms = PC_MACHINE(machine); |
| ram_addr_t hotplugabble_address_space_size = |
| object_property_get_int(OBJECT(pcms), PC_MACHINE_DEVMEM_REGION_SIZE, |
| NULL); |
| |
| srat_start = table_data->len; |
| |
| srat = acpi_data_push(table_data, sizeof *srat); |
| srat->reserved1 = cpu_to_le32(1); |
| |
| for (i = 0; i < apic_ids->len; i++) { |
| int node_id = apic_ids->cpus[i].props.node_id; |
| uint32_t apic_id = apic_ids->cpus[i].arch_id; |
| |
| if (apic_id < 255) { |
| AcpiSratProcessorAffinity *core; |
| |
| core = acpi_data_push(table_data, sizeof *core); |
| core->type = ACPI_SRAT_PROCESSOR_APIC; |
| core->length = sizeof(*core); |
| core->local_apic_id = apic_id; |
| core->proximity_lo = node_id; |
| memset(core->proximity_hi, 0, 3); |
| core->local_sapic_eid = 0; |
| core->flags = cpu_to_le32(1); |
| } else { |
| AcpiSratProcessorX2ApicAffinity *core; |
| |
| core = acpi_data_push(table_data, sizeof *core); |
| core->type = ACPI_SRAT_PROCESSOR_x2APIC; |
| core->length = sizeof(*core); |
| core->x2apic_id = cpu_to_le32(apic_id); |
| core->proximity_domain = cpu_to_le32(node_id); |
| core->flags = cpu_to_le32(1); |
| } |
| } |
| |
| |
| /* the memory map is a bit tricky, it contains at least one hole |
| * from 640k-1M and possibly another one from 3.5G-4G. |
| */ |
| next_base = 0; |
| numa_start = table_data->len; |
| |
| for (i = 1; i < pcms->numa_nodes + 1; ++i) { |
| mem_base = next_base; |
| mem_len = pcms->node_mem[i - 1]; |
| next_base = mem_base + mem_len; |
| |
| /* Cut out the 640K hole */ |
| if (mem_base <= HOLE_640K_START && |
| next_base > HOLE_640K_START) { |
| mem_len -= next_base - HOLE_640K_START; |
| if (mem_len > 0) { |
| numamem = acpi_data_push(table_data, sizeof *numamem); |
| build_srat_memory(numamem, mem_base, mem_len, i - 1, |
| MEM_AFFINITY_ENABLED); |
| } |
| |
| /* Check for the rare case: 640K < RAM < 1M */ |
| if (next_base <= HOLE_640K_END) { |
| next_base = HOLE_640K_END; |
| continue; |
| } |
| mem_base = HOLE_640K_END; |
| mem_len = next_base - HOLE_640K_END; |
| } |
| |
| /* Cut out the ACPI_PCI hole */ |
| if (mem_base <= pcms->below_4g_mem_size && |
| next_base > pcms->below_4g_mem_size) { |
| mem_len -= next_base - pcms->below_4g_mem_size; |
| if (mem_len > 0) { |
| numamem = acpi_data_push(table_data, sizeof *numamem); |
| build_srat_memory(numamem, mem_base, mem_len, i - 1, |
| MEM_AFFINITY_ENABLED); |
| } |
| mem_base = 1ULL << 32; |
| mem_len = next_base - pcms->below_4g_mem_size; |
| next_base = mem_base + mem_len; |
| } |
| |
| if (mem_len > 0) { |
| numamem = acpi_data_push(table_data, sizeof *numamem); |
| build_srat_memory(numamem, mem_base, mem_len, i - 1, |
| MEM_AFFINITY_ENABLED); |
| } |
| } |
| slots = (table_data->len - numa_start) / sizeof *numamem; |
| for (; slots < pcms->numa_nodes + 2; slots++) { |
| numamem = acpi_data_push(table_data, sizeof *numamem); |
| build_srat_memory(numamem, 0, 0, 0, MEM_AFFINITY_NOFLAGS); |
| } |
| |
| /* |
| * Entry is required for Windows to enable memory hotplug in OS |
| * and for Linux to enable SWIOTLB when booted with less than |
| * 4G of RAM. Windows works better if the entry sets proximity |
| * to the highest NUMA node in the machine. |
| * Memory devices may override proximity set by this entry, |
| * providing _PXM method if necessary. |
| */ |
| if (hotplugabble_address_space_size) { |
| numamem = acpi_data_push(table_data, sizeof *numamem); |
| build_srat_memory(numamem, machine->device_memory->base, |
| hotplugabble_address_space_size, pcms->numa_nodes - 1, |
| MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED); |
| } |
| |
| build_header(linker, table_data, |
| (void *)(table_data->data + srat_start), |
| "SRAT", |
| table_data->len - srat_start, 1, NULL, NULL); |
| } |
| |
| /* |
| * VT-d spec 8.1 DMA Remapping Reporting Structure |
| * (version Oct. 2014 or later) |
| */ |
| static void |
| build_dmar_q35(GArray *table_data, BIOSLinker *linker) |
| { |
| int dmar_start = table_data->len; |
| |
| AcpiTableDmar *dmar; |
| AcpiDmarHardwareUnit *drhd; |
| AcpiDmarRootPortATS *atsr; |
| uint8_t dmar_flags = 0; |
| X86IOMMUState *iommu = x86_iommu_get_default(); |
| AcpiDmarDeviceScope *scope = NULL; |
| /* Root complex IOAPIC use one path[0] only */ |
| size_t ioapic_scope_size = sizeof(*scope) + sizeof(scope->path[0]); |
| IntelIOMMUState *intel_iommu = INTEL_IOMMU_DEVICE(iommu); |
| |
| assert(iommu); |
| if (x86_iommu_ir_supported(iommu)) { |
| dmar_flags |= 0x1; /* Flags: 0x1: INT_REMAP */ |
| } |
| |
| dmar = acpi_data_push(table_data, sizeof(*dmar)); |
| dmar->host_address_width = intel_iommu->aw_bits - 1; |
| dmar->flags = dmar_flags; |
| |
| /* DMAR Remapping Hardware Unit Definition structure */ |
| drhd = acpi_data_push(table_data, sizeof(*drhd) + ioapic_scope_size); |
| drhd->type = cpu_to_le16(ACPI_DMAR_TYPE_HARDWARE_UNIT); |
| drhd->length = cpu_to_le16(sizeof(*drhd) + ioapic_scope_size); |
| drhd->flags = ACPI_DMAR_INCLUDE_PCI_ALL; |
| drhd->pci_segment = cpu_to_le16(0); |
| drhd->address = cpu_to_le64(Q35_HOST_BRIDGE_IOMMU_ADDR); |
| |
| /* Scope definition for the root-complex IOAPIC. See VT-d spec |
| * 8.3.1 (version Oct. 2014 or later). */ |
| scope = &drhd->scope[0]; |
| scope->entry_type = 0x03; /* Type: 0x03 for IOAPIC */ |
| scope->length = ioapic_scope_size; |
| scope->enumeration_id = ACPI_BUILD_IOAPIC_ID; |
| scope->bus = Q35_PSEUDO_BUS_PLATFORM; |
| scope->path[0].device = PCI_SLOT(Q35_PSEUDO_DEVFN_IOAPIC); |
| scope->path[0].function = PCI_FUNC(Q35_PSEUDO_DEVFN_IOAPIC); |
| |
| if (iommu->dt_supported) { |
| atsr = acpi_data_push(table_data, sizeof(*atsr)); |
| atsr->type = cpu_to_le16(ACPI_DMAR_TYPE_ATSR); |
| atsr->length = cpu_to_le16(sizeof(*atsr)); |
| atsr->flags = ACPI_DMAR_ATSR_ALL_PORTS; |
| atsr->pci_segment = cpu_to_le16(0); |
| } |
| |
| build_header(linker, table_data, (void *)(table_data->data + dmar_start), |
| "DMAR", table_data->len - dmar_start, 1, NULL, NULL); |
| } |
| /* |
| * IVRS table as specified in AMD IOMMU Specification v2.62, Section 5.2 |
| * accessible here http://support.amd.com/TechDocs/48882_IOMMU.pdf |
| */ |
| #define IOAPIC_SB_DEVID (uint64_t)PCI_BUILD_BDF(0, PCI_DEVFN(0x14, 0)) |
| |
| static void |
| build_amd_iommu(GArray *table_data, BIOSLinker *linker) |
| { |
| int ivhd_table_len = 28; |
| int iommu_start = table_data->len; |
| AMDVIState *s = AMD_IOMMU_DEVICE(x86_iommu_get_default()); |
| |
| /* IVRS header */ |
| acpi_data_push(table_data, sizeof(AcpiTableHeader)); |
| /* IVinfo - IO virtualization information common to all |
| * IOMMU units in a system |
| */ |
| build_append_int_noprefix(table_data, 40UL << 8/* PASize */, 4); |
| /* reserved */ |
| build_append_int_noprefix(table_data, 0, 8); |
| |
| /* IVHD definition - type 10h */ |
| build_append_int_noprefix(table_data, 0x10, 1); |
| /* virtualization flags */ |
| build_append_int_noprefix(table_data, |
| (1UL << 0) | /* HtTunEn */ |
| (1UL << 4) | /* iotblSup */ |
| (1UL << 6) | /* PrefSup */ |
| (1UL << 7), /* PPRSup */ |
| 1); |
| |
| /* |
| * When interrupt remapping is supported, we add a special IVHD device |
| * for type IO-APIC. |
| */ |
| if (x86_iommu_ir_supported(x86_iommu_get_default())) { |
| ivhd_table_len += 8; |
| } |
| /* IVHD length */ |
| build_append_int_noprefix(table_data, ivhd_table_len, 2); |
| /* DeviceID */ |
| build_append_int_noprefix(table_data, s->devid, 2); |
| /* Capability offset */ |
| build_append_int_noprefix(table_data, s->capab_offset, 2); |
| /* IOMMU base address */ |
| build_append_int_noprefix(table_data, s->mmio.addr, 8); |
| /* PCI Segment Group */ |
| build_append_int_noprefix(table_data, 0, 2); |
| /* IOMMU info */ |
| build_append_int_noprefix(table_data, 0, 2); |
| /* IOMMU Feature Reporting */ |
| build_append_int_noprefix(table_data, |
| (48UL << 30) | /* HATS */ |
| (48UL << 28) | /* GATS */ |
| (1UL << 2) | /* GTSup */ |
| (1UL << 6), /* GASup */ |
| 4); |
| /* |
| * Type 1 device entry reporting all devices |
| * These are 4-byte device entries currently reporting the range of |
| * Refer to Spec - Table 95:IVHD Device Entry Type Codes(4-byte) |
| */ |
| build_append_int_noprefix(table_data, 0x0000001, 4); |
| |
| /* |
| * Add a special IVHD device type. |
| * Refer to spec - Table 95: IVHD device entry type codes |
| * |
| * Linux IOMMU driver checks for the special IVHD device (type IO-APIC). |
| * See Linux kernel commit 'c2ff5cf5294bcbd7fa50f7d860e90a66db7e5059' |
| */ |
| if (x86_iommu_ir_supported(x86_iommu_get_default())) { |
| build_append_int_noprefix(table_data, |
| (0x1ull << 56) | /* type IOAPIC */ |
| (IOAPIC_SB_DEVID << 40) | /* IOAPIC devid */ |
| 0x48, /* special device */ |
| 8); |
| } |
| |
| build_header(linker, table_data, (void *)(table_data->data + iommu_start), |
| "IVRS", table_data->len - iommu_start, 1, NULL, NULL); |
| } |
| |
| typedef |
| struct AcpiBuildState { |
| /* Copy of table in RAM (for patching). */ |
| MemoryRegion *table_mr; |
| /* Is table patched? */ |
| uint8_t patched; |
| void *rsdp; |
| MemoryRegion *rsdp_mr; |
| MemoryRegion *linker_mr; |
| } AcpiBuildState; |
| |
| static bool acpi_get_mcfg(AcpiMcfgInfo *mcfg) |
| { |
| Object *pci_host; |
| QObject *o; |
| |
| pci_host = acpi_get_i386_pci_host(); |
| g_assert(pci_host); |
| |
| o = object_property_get_qobject(pci_host, PCIE_HOST_MCFG_BASE, NULL); |
| if (!o) { |
| return false; |
| } |
| mcfg->base = qnum_get_uint(qobject_to(QNum, o)); |
| qobject_unref(o); |
| if (mcfg->base == PCIE_BASE_ADDR_UNMAPPED) { |
| return false; |
| } |
| |
| o = object_property_get_qobject(pci_host, PCIE_HOST_MCFG_SIZE, NULL); |
| assert(o); |
| mcfg->size = qnum_get_uint(qobject_to(QNum, o)); |
| qobject_unref(o); |
| return true; |
| } |
| |
| static |
| void acpi_build(AcpiBuildTables *tables, MachineState *machine) |
| { |
| PCMachineState *pcms = PC_MACHINE(machine); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| GArray *table_offsets; |
| unsigned facs, dsdt, rsdt, fadt; |
| AcpiPmInfo pm; |
| AcpiMiscInfo misc; |
| AcpiMcfgInfo mcfg; |
| Range pci_hole, pci_hole64; |
| uint8_t *u; |
| size_t aml_len = 0; |
| GArray *tables_blob = tables->table_data; |
| AcpiSlicOem slic_oem = { .id = NULL, .table_id = NULL }; |
| Object *vmgenid_dev; |
| |
| acpi_get_pm_info(&pm); |
| acpi_get_misc_info(&misc); |
| acpi_get_pci_holes(&pci_hole, &pci_hole64); |
| acpi_get_slic_oem(&slic_oem); |
| |
| table_offsets = g_array_new(false, true /* clear */, |
| sizeof(uint32_t)); |
| ACPI_BUILD_DPRINTF("init ACPI tables\n"); |
| |
| bios_linker_loader_alloc(tables->linker, |
| ACPI_BUILD_TABLE_FILE, tables_blob, |
| 64 /* Ensure FACS is aligned */, |
| false /* high memory */); |
| |
| /* |
| * FACS is pointed to by FADT. |
| * We place it first since it's the only table that has alignment |
| * requirements. |
| */ |
| facs = tables_blob->len; |
| build_facs(tables_blob); |
| |
| /* DSDT is pointed to by FADT */ |
| dsdt = tables_blob->len; |
| build_dsdt(tables_blob, tables->linker, &pm, &misc, |
| &pci_hole, &pci_hole64, machine); |
| |
| /* Count the size of the DSDT and SSDT, we will need it for legacy |
| * sizing of ACPI tables. |
| */ |
| aml_len += tables_blob->len - dsdt; |
| |
| /* ACPI tables pointed to by RSDT */ |
| fadt = tables_blob->len; |
| acpi_add_table(table_offsets, tables_blob); |
| pm.fadt.facs_tbl_offset = &facs; |
| pm.fadt.dsdt_tbl_offset = &dsdt; |
| pm.fadt.xdsdt_tbl_offset = &dsdt; |
| build_fadt(tables_blob, tables->linker, &pm.fadt, |
| slic_oem.id, slic_oem.table_id); |
| aml_len += tables_blob->len - fadt; |
| |
| acpi_add_table(table_offsets, tables_blob); |
| build_madt(tables_blob, tables->linker, pcms); |
| |
| vmgenid_dev = find_vmgenid_dev(); |
| if (vmgenid_dev) { |
| acpi_add_table(table_offsets, tables_blob); |
| vmgenid_build_acpi(VMGENID(vmgenid_dev), tables_blob, |
| tables->vmgenid, tables->linker); |
| } |
| |
| if (misc.has_hpet) { |
| acpi_add_table(table_offsets, tables_blob); |
| build_hpet(tables_blob, tables->linker); |
| } |
| if (misc.tpm_version != TPM_VERSION_UNSPEC) { |
| acpi_add_table(table_offsets, tables_blob); |
| build_tpm_tcpa(tables_blob, tables->linker, tables->tcpalog); |
| |
| if (misc.tpm_version == TPM_VERSION_2_0) { |
| acpi_add_table(table_offsets, tables_blob); |
| build_tpm2(tables_blob, tables->linker, tables->tcpalog); |
| } |
| } |
| if (pcms->numa_nodes) { |
| acpi_add_table(table_offsets, tables_blob); |
| build_srat(tables_blob, tables->linker, machine); |
| if (have_numa_distance) { |
| acpi_add_table(table_offsets, tables_blob); |
| build_slit(tables_blob, tables->linker); |
| } |
| } |
| if (acpi_get_mcfg(&mcfg)) { |
| acpi_add_table(table_offsets, tables_blob); |
| build_mcfg(tables_blob, tables->linker, &mcfg); |
| } |
| if (x86_iommu_get_default()) { |
| IommuType IOMMUType = x86_iommu_get_type(); |
| if (IOMMUType == TYPE_AMD) { |
| acpi_add_table(table_offsets, tables_blob); |
| build_amd_iommu(tables_blob, tables->linker); |
| } else if (IOMMUType == TYPE_INTEL) { |
| acpi_add_table(table_offsets, tables_blob); |
| build_dmar_q35(tables_blob, tables->linker); |
| } |
| } |
| if (machine->nvdimms_state->is_enabled) { |
| nvdimm_build_acpi(table_offsets, tables_blob, tables->linker, |
| machine->nvdimms_state, machine->ram_slots); |
| } |
| |
| /* Add tables supplied by user (if any) */ |
| for (u = acpi_table_first(); u; u = acpi_table_next(u)) { |
| unsigned len = acpi_table_len(u); |
| |
| acpi_add_table(table_offsets, tables_blob); |
| g_array_append_vals(tables_blob, u, len); |
| } |
| |
| /* RSDT is pointed to by RSDP */ |
| rsdt = tables_blob->len; |
| build_rsdt(tables_blob, tables->linker, table_offsets, |
| slic_oem.id, slic_oem.table_id); |
| |
| /* RSDP is in FSEG memory, so allocate it separately */ |
| { |
| AcpiRsdpData rsdp_data = { |
| .revision = 0, |
| .oem_id = ACPI_BUILD_APPNAME6, |
| .xsdt_tbl_offset = NULL, |
| .rsdt_tbl_offset = &rsdt, |
| }; |
| build_rsdp(tables->rsdp, tables->linker, &rsdp_data); |
| if (!pcmc->rsdp_in_ram) { |
| /* We used to allocate some extra space for RSDP revision 2 but |
| * only used the RSDP revision 0 space. The extra bytes were |
| * zeroed out and not used. |
| * Here we continue wasting those extra 16 bytes to make sure we |
| * don't break migration for machine types 2.2 and older due to |
| * RSDP blob size mismatch. |
| */ |
| build_append_int_noprefix(tables->rsdp, 0, 16); |
| } |
| } |
| |
| /* We'll expose it all to Guest so we want to reduce |
| * chance of size changes. |
| * |
| * We used to align the tables to 4k, but of course this would |
| * too simple to be enough. 4k turned out to be too small an |
| * alignment very soon, and in fact it is almost impossible to |
| * keep the table size stable for all (max_cpus, max_memory_slots) |
| * combinations. So the table size is always 64k for pc-i440fx-2.1 |
| * and we give an error if the table grows beyond that limit. |
| * |
| * We still have the problem of migrating from "-M pc-i440fx-2.0". For |
| * that, we exploit the fact that QEMU 2.1 generates _smaller_ tables |
| * than 2.0 and we can always pad the smaller tables with zeros. We can |
| * then use the exact size of the 2.0 tables. |
| * |
| * All this is for PIIX4, since QEMU 2.0 didn't support Q35 migration. |
| */ |
| if (pcmc->legacy_acpi_table_size) { |
| /* Subtracting aml_len gives the size of fixed tables. Then add the |
| * size of the PIIX4 DSDT/SSDT in QEMU 2.0. |
| */ |
| int legacy_aml_len = |
| pcmc->legacy_acpi_table_size + |
| ACPI_BUILD_LEGACY_CPU_AML_SIZE * pcms->apic_id_limit; |
| int legacy_table_size = |
| ROUND_UP(tables_blob->len - aml_len + legacy_aml_len, |
| ACPI_BUILD_ALIGN_SIZE); |
| if (tables_blob->len > legacy_table_size) { |
| /* Should happen only with PCI bridges and -M pc-i440fx-2.0. */ |
| warn_report("ACPI table size %u exceeds %d bytes," |
| " migration may not work", |
| tables_blob->len, legacy_table_size); |
| error_printf("Try removing CPUs, NUMA nodes, memory slots" |
| " or PCI bridges."); |
| } |
| g_array_set_size(tables_blob, legacy_table_size); |
| } else { |
| /* Make sure we have a buffer in case we need to resize the tables. */ |
| if (tables_blob->len > ACPI_BUILD_TABLE_SIZE / 2) { |
| /* As of QEMU 2.1, this fires with 160 VCPUs and 255 memory slots. */ |
| warn_report("ACPI table size %u exceeds %d bytes," |
| " migration may not work", |
| tables_blob->len, ACPI_BUILD_TABLE_SIZE / 2); |
| error_printf("Try removing CPUs, NUMA nodes, memory slots" |
| " or PCI bridges."); |
| } |
| acpi_align_size(tables_blob, ACPI_BUILD_TABLE_SIZE); |
| } |
| |
| acpi_align_size(tables->linker->cmd_blob, ACPI_BUILD_ALIGN_SIZE); |
| |
| /* Cleanup memory that's no longer used. */ |
| g_array_free(table_offsets, true); |
| } |
| |
| static void acpi_ram_update(MemoryRegion *mr, GArray *data) |
| { |
| uint32_t size = acpi_data_len(data); |
| |
| /* Make sure RAM size is correct - in case it got changed e.g. by migration */ |
| memory_region_ram_resize(mr, size, &error_abort); |
| |
| memcpy(memory_region_get_ram_ptr(mr), data->data, size); |
| memory_region_set_dirty(mr, 0, size); |
| } |
| |
| static void acpi_build_update(void *build_opaque) |
| { |
| AcpiBuildState *build_state = build_opaque; |
| AcpiBuildTables tables; |
| |
| /* No state to update or already patched? Nothing to do. */ |
| if (!build_state || build_state->patched) { |
| return; |
| } |
| build_state->patched = 1; |
| |
| acpi_build_tables_init(&tables); |
| |
| acpi_build(&tables, MACHINE(qdev_get_machine())); |
| |
| acpi_ram_update(build_state->table_mr, tables.table_data); |
| |
| if (build_state->rsdp) { |
| memcpy(build_state->rsdp, tables.rsdp->data, acpi_data_len(tables.rsdp)); |
| } else { |
| acpi_ram_update(build_state->rsdp_mr, tables.rsdp); |
| } |
| |
| acpi_ram_update(build_state->linker_mr, tables.linker->cmd_blob); |
| acpi_build_tables_cleanup(&tables, true); |
| } |
| |
| static void acpi_build_reset(void *build_opaque) |
| { |
| AcpiBuildState *build_state = build_opaque; |
| build_state->patched = 0; |
| } |
| |
| static MemoryRegion *acpi_add_rom_blob(AcpiBuildState *build_state, |
| GArray *blob, const char *name, |
| uint64_t max_size) |
| { |
| return rom_add_blob(name, blob->data, acpi_data_len(blob), max_size, -1, |
| name, acpi_build_update, build_state, NULL, true); |
| } |
| |
| static const VMStateDescription vmstate_acpi_build = { |
| .name = "acpi_build", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT8(patched, AcpiBuildState), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| void acpi_setup(void) |
| { |
| PCMachineState *pcms = PC_MACHINE(qdev_get_machine()); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| AcpiBuildTables tables; |
| AcpiBuildState *build_state; |
| Object *vmgenid_dev; |
| TPMIf *tpm; |
| static FwCfgTPMConfig tpm_config; |
| |
| if (!pcms->fw_cfg) { |
| ACPI_BUILD_DPRINTF("No fw cfg. Bailing out.\n"); |
| return; |
| } |
| |
| if (!pcms->acpi_build_enabled) { |
| ACPI_BUILD_DPRINTF("ACPI build disabled. Bailing out.\n"); |
| return; |
| } |
| |
| if (!acpi_enabled) { |
| ACPI_BUILD_DPRINTF("ACPI disabled. Bailing out.\n"); |
| return; |
| } |
| |
| build_state = g_malloc0(sizeof *build_state); |
| |
| acpi_build_tables_init(&tables); |
| acpi_build(&tables, MACHINE(pcms)); |
| |
| /* Now expose it all to Guest */ |
| build_state->table_mr = acpi_add_rom_blob(build_state, tables.table_data, |
| ACPI_BUILD_TABLE_FILE, |
| ACPI_BUILD_TABLE_MAX_SIZE); |
| assert(build_state->table_mr != NULL); |
| |
| build_state->linker_mr = |
| acpi_add_rom_blob(build_state, tables.linker->cmd_blob, |
| "etc/table-loader", 0); |
| |
| fw_cfg_add_file(pcms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, |
| tables.tcpalog->data, acpi_data_len(tables.tcpalog)); |
| |
| tpm = tpm_find(); |
| if (tpm && object_property_get_bool(OBJECT(tpm), "ppi", &error_abort)) { |
| tpm_config = (FwCfgTPMConfig) { |
| .tpmppi_address = cpu_to_le32(TPM_PPI_ADDR_BASE), |
| .tpm_version = tpm_get_version(tpm), |
| .tpmppi_version = TPM_PPI_VERSION_1_30 |
| }; |
| fw_cfg_add_file(pcms->fw_cfg, "etc/tpm/config", |
| &tpm_config, sizeof tpm_config); |
| } |
| |
| vmgenid_dev = find_vmgenid_dev(); |
| if (vmgenid_dev) { |
| vmgenid_add_fw_cfg(VMGENID(vmgenid_dev), pcms->fw_cfg, |
| tables.vmgenid); |
| } |
| |
| if (!pcmc->rsdp_in_ram) { |
| /* |
| * Keep for compatibility with old machine types. |
| * Though RSDP is small, its contents isn't immutable, so |
| * we'll update it along with the rest of tables on guest access. |
| */ |
| uint32_t rsdp_size = acpi_data_len(tables.rsdp); |
| |
| build_state->rsdp = g_memdup(tables.rsdp->data, rsdp_size); |
| fw_cfg_add_file_callback(pcms->fw_cfg, ACPI_BUILD_RSDP_FILE, |
| acpi_build_update, NULL, build_state, |
| build_state->rsdp, rsdp_size, true); |
| build_state->rsdp_mr = NULL; |
| } else { |
| build_state->rsdp = NULL; |
| build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp, |
| ACPI_BUILD_RSDP_FILE, 0); |
| } |
| |
| qemu_register_reset(acpi_build_reset, build_state); |
| acpi_build_reset(build_state); |
| vmstate_register(NULL, 0, &vmstate_acpi_build, build_state); |
| |
| /* Cleanup tables but don't free the memory: we track it |
| * in build_state. |
| */ |
| acpi_build_tables_cleanup(&tables, false); |
| } |