| /* |
| * SMSC 91C111 Ethernet interface emulation |
| * |
| * Copyright (c) 2005 CodeSourcery, LLC. |
| * Written by Paul Brook |
| * |
| * This code is licensed under the GPL |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/sysbus.h" |
| #include "migration/vmstate.h" |
| #include "net/net.h" |
| #include "hw/irq.h" |
| #include "hw/net/smc91c111.h" |
| #include "hw/qdev-properties.h" |
| #include "qapi/error.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| /* For crc32 */ |
| #include <zlib.h> |
| #include "qom/object.h" |
| |
| /* Number of 2k memory pages available. */ |
| #define NUM_PACKETS 4 |
| |
| #define TYPE_SMC91C111 "smc91c111" |
| OBJECT_DECLARE_SIMPLE_TYPE(smc91c111_state, SMC91C111) |
| |
| struct smc91c111_state { |
| SysBusDevice parent_obj; |
| |
| NICState *nic; |
| NICConf conf; |
| uint16_t tcr; |
| uint16_t rcr; |
| uint16_t cr; |
| uint16_t ctr; |
| uint16_t gpr; |
| uint16_t ptr; |
| uint16_t ercv; |
| qemu_irq irq; |
| int bank; |
| int packet_num; |
| int tx_alloc; |
| /* Bitmask of allocated packets. */ |
| int allocated; |
| int tx_fifo_len; |
| int tx_fifo[NUM_PACKETS]; |
| int rx_fifo_len; |
| int rx_fifo[NUM_PACKETS]; |
| int tx_fifo_done_len; |
| int tx_fifo_done[NUM_PACKETS]; |
| /* Packet buffer memory. */ |
| uint8_t data[NUM_PACKETS][2048]; |
| uint8_t int_level; |
| uint8_t int_mask; |
| MemoryRegion mmio; |
| }; |
| |
| static const VMStateDescription vmstate_smc91c111 = { |
| .name = "smc91c111", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT16(tcr, smc91c111_state), |
| VMSTATE_UINT16(rcr, smc91c111_state), |
| VMSTATE_UINT16(cr, smc91c111_state), |
| VMSTATE_UINT16(ctr, smc91c111_state), |
| VMSTATE_UINT16(gpr, smc91c111_state), |
| VMSTATE_UINT16(ptr, smc91c111_state), |
| VMSTATE_UINT16(ercv, smc91c111_state), |
| VMSTATE_INT32(bank, smc91c111_state), |
| VMSTATE_INT32(packet_num, smc91c111_state), |
| VMSTATE_INT32(tx_alloc, smc91c111_state), |
| VMSTATE_INT32(allocated, smc91c111_state), |
| VMSTATE_INT32(tx_fifo_len, smc91c111_state), |
| VMSTATE_INT32_ARRAY(tx_fifo, smc91c111_state, NUM_PACKETS), |
| VMSTATE_INT32(rx_fifo_len, smc91c111_state), |
| VMSTATE_INT32_ARRAY(rx_fifo, smc91c111_state, NUM_PACKETS), |
| VMSTATE_INT32(tx_fifo_done_len, smc91c111_state), |
| VMSTATE_INT32_ARRAY(tx_fifo_done, smc91c111_state, NUM_PACKETS), |
| VMSTATE_BUFFER_UNSAFE(data, smc91c111_state, 0, NUM_PACKETS * 2048), |
| VMSTATE_UINT8(int_level, smc91c111_state), |
| VMSTATE_UINT8(int_mask, smc91c111_state), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| #define RCR_SOFT_RST 0x8000 |
| #define RCR_STRIP_CRC 0x0200 |
| #define RCR_RXEN 0x0100 |
| |
| #define TCR_EPH_LOOP 0x2000 |
| #define TCR_NOCRC 0x0100 |
| #define TCR_PAD_EN 0x0080 |
| #define TCR_FORCOL 0x0004 |
| #define TCR_LOOP 0x0002 |
| #define TCR_TXEN 0x0001 |
| |
| #define INT_MD 0x80 |
| #define INT_ERCV 0x40 |
| #define INT_EPH 0x20 |
| #define INT_RX_OVRN 0x10 |
| #define INT_ALLOC 0x08 |
| #define INT_TX_EMPTY 0x04 |
| #define INT_TX 0x02 |
| #define INT_RCV 0x01 |
| |
| #define CTR_AUTO_RELEASE 0x0800 |
| #define CTR_RELOAD 0x0002 |
| #define CTR_STORE 0x0001 |
| |
| #define RS_ALGNERR 0x8000 |
| #define RS_BRODCAST 0x4000 |
| #define RS_BADCRC 0x2000 |
| #define RS_ODDFRAME 0x1000 |
| #define RS_TOOLONG 0x0800 |
| #define RS_TOOSHORT 0x0400 |
| #define RS_MULTICAST 0x0001 |
| |
| /* Update interrupt status. */ |
| static void smc91c111_update(smc91c111_state *s) |
| { |
| int level; |
| |
| if (s->tx_fifo_len == 0) |
| s->int_level |= INT_TX_EMPTY; |
| if (s->tx_fifo_done_len != 0) |
| s->int_level |= INT_TX; |
| level = (s->int_level & s->int_mask) != 0; |
| qemu_set_irq(s->irq, level); |
| } |
| |
| static bool smc91c111_can_receive(smc91c111_state *s) |
| { |
| if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST)) { |
| return true; |
| } |
| if (s->allocated == (1 << NUM_PACKETS) - 1 || |
| s->rx_fifo_len == NUM_PACKETS) { |
| return false; |
| } |
| return true; |
| } |
| |
| static inline void smc91c111_flush_queued_packets(smc91c111_state *s) |
| { |
| if (smc91c111_can_receive(s)) { |
| qemu_flush_queued_packets(qemu_get_queue(s->nic)); |
| } |
| } |
| |
| /* Try to allocate a packet. Returns 0x80 on failure. */ |
| static int smc91c111_allocate_packet(smc91c111_state *s) |
| { |
| int i; |
| if (s->allocated == (1 << NUM_PACKETS) - 1) { |
| return 0x80; |
| } |
| |
| for (i = 0; i < NUM_PACKETS; i++) { |
| if ((s->allocated & (1 << i)) == 0) |
| break; |
| } |
| s->allocated |= 1 << i; |
| return i; |
| } |
| |
| |
| /* Process a pending TX allocate. */ |
| static void smc91c111_tx_alloc(smc91c111_state *s) |
| { |
| s->tx_alloc = smc91c111_allocate_packet(s); |
| if (s->tx_alloc == 0x80) |
| return; |
| s->int_level |= INT_ALLOC; |
| smc91c111_update(s); |
| } |
| |
| /* Remove and item from the RX FIFO. */ |
| static void smc91c111_pop_rx_fifo(smc91c111_state *s) |
| { |
| int i; |
| |
| s->rx_fifo_len--; |
| if (s->rx_fifo_len) { |
| for (i = 0; i < s->rx_fifo_len; i++) |
| s->rx_fifo[i] = s->rx_fifo[i + 1]; |
| s->int_level |= INT_RCV; |
| } else { |
| s->int_level &= ~INT_RCV; |
| } |
| smc91c111_flush_queued_packets(s); |
| smc91c111_update(s); |
| } |
| |
| /* Remove an item from the TX completion FIFO. */ |
| static void smc91c111_pop_tx_fifo_done(smc91c111_state *s) |
| { |
| int i; |
| |
| if (s->tx_fifo_done_len == 0) |
| return; |
| s->tx_fifo_done_len--; |
| for (i = 0; i < s->tx_fifo_done_len; i++) |
| s->tx_fifo_done[i] = s->tx_fifo_done[i + 1]; |
| } |
| |
| /* Release the memory allocated to a packet. */ |
| static void smc91c111_release_packet(smc91c111_state *s, int packet) |
| { |
| s->allocated &= ~(1 << packet); |
| if (s->tx_alloc == 0x80) |
| smc91c111_tx_alloc(s); |
| smc91c111_flush_queued_packets(s); |
| } |
| |
| /* Flush the TX FIFO. */ |
| static void smc91c111_do_tx(smc91c111_state *s) |
| { |
| int i; |
| int len; |
| int control; |
| int packetnum; |
| uint8_t *p; |
| |
| if ((s->tcr & TCR_TXEN) == 0) |
| return; |
| if (s->tx_fifo_len == 0) |
| return; |
| for (i = 0; i < s->tx_fifo_len; i++) { |
| packetnum = s->tx_fifo[i]; |
| p = &s->data[packetnum][0]; |
| /* Set status word. */ |
| *(p++) = 0x01; |
| *(p++) = 0x40; |
| len = *(p++); |
| len |= ((int)*(p++)) << 8; |
| len -= 6; |
| control = p[len + 1]; |
| if (control & 0x20) |
| len++; |
| /* ??? This overwrites the data following the buffer. |
| Don't know what real hardware does. */ |
| if (len < 64 && (s->tcr & TCR_PAD_EN)) { |
| memset(p + len, 0, 64 - len); |
| len = 64; |
| } |
| #if 0 |
| { |
| int add_crc; |
| |
| /* The card is supposed to append the CRC to the frame. |
| However none of the other network traffic has the CRC |
| appended. Suspect this is low level ethernet detail we |
| don't need to worry about. */ |
| add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0; |
| if (add_crc) { |
| uint32_t crc; |
| |
| crc = crc32(~0, p, len); |
| memcpy(p + len, &crc, 4); |
| len += 4; |
| } |
| } |
| #endif |
| if (s->ctr & CTR_AUTO_RELEASE) |
| /* Race? */ |
| smc91c111_release_packet(s, packetnum); |
| else if (s->tx_fifo_done_len < NUM_PACKETS) |
| s->tx_fifo_done[s->tx_fifo_done_len++] = packetnum; |
| qemu_send_packet(qemu_get_queue(s->nic), p, len); |
| } |
| s->tx_fifo_len = 0; |
| smc91c111_update(s); |
| } |
| |
| /* Add a packet to the TX FIFO. */ |
| static void smc91c111_queue_tx(smc91c111_state *s, int packet) |
| { |
| if (s->tx_fifo_len == NUM_PACKETS) |
| return; |
| s->tx_fifo[s->tx_fifo_len++] = packet; |
| smc91c111_do_tx(s); |
| } |
| |
| static void smc91c111_reset(DeviceState *dev) |
| { |
| smc91c111_state *s = SMC91C111(dev); |
| |
| s->bank = 0; |
| s->tx_fifo_len = 0; |
| s->tx_fifo_done_len = 0; |
| s->rx_fifo_len = 0; |
| s->allocated = 0; |
| s->packet_num = 0; |
| s->tx_alloc = 0; |
| s->tcr = 0; |
| s->rcr = 0; |
| s->cr = 0xa0b1; |
| s->ctr = 0x1210; |
| s->ptr = 0; |
| s->ercv = 0x1f; |
| s->int_level = INT_TX_EMPTY; |
| s->int_mask = 0; |
| smc91c111_update(s); |
| } |
| |
| #define SET_LOW(name, val) s->name = (s->name & 0xff00) | val |
| #define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8) |
| |
| static void smc91c111_writeb(void *opaque, hwaddr offset, |
| uint32_t value) |
| { |
| smc91c111_state *s = (smc91c111_state *)opaque; |
| |
| offset = offset & 0xf; |
| if (offset == 14) { |
| s->bank = value; |
| return; |
| } |
| if (offset == 15) |
| return; |
| switch (s->bank) { |
| case 0: |
| switch (offset) { |
| case 0: /* TCR */ |
| SET_LOW(tcr, value); |
| return; |
| case 1: |
| SET_HIGH(tcr, value); |
| return; |
| case 4: /* RCR */ |
| SET_LOW(rcr, value); |
| return; |
| case 5: |
| SET_HIGH(rcr, value); |
| if (s->rcr & RCR_SOFT_RST) { |
| smc91c111_reset(DEVICE(s)); |
| } |
| smc91c111_flush_queued_packets(s); |
| return; |
| case 10: case 11: /* RPCR */ |
| /* Ignored */ |
| return; |
| case 12: case 13: /* Reserved */ |
| return; |
| } |
| break; |
| |
| case 1: |
| switch (offset) { |
| case 0: /* CONFIG */ |
| SET_LOW(cr, value); |
| return; |
| case 1: |
| SET_HIGH(cr,value); |
| return; |
| case 2: case 3: /* BASE */ |
| case 4: case 5: case 6: case 7: case 8: case 9: /* IA */ |
| /* Not implemented. */ |
| return; |
| case 10: /* General Purpose */ |
| SET_LOW(gpr, value); |
| return; |
| case 11: |
| SET_HIGH(gpr, value); |
| return; |
| case 12: /* Control */ |
| if (value & 1) { |
| qemu_log_mask(LOG_UNIMP, |
| "smc91c111: EEPROM store not implemented\n"); |
| } |
| if (value & 2) { |
| qemu_log_mask(LOG_UNIMP, |
| "smc91c111: EEPROM reload not implemented\n"); |
| } |
| value &= ~3; |
| SET_LOW(ctr, value); |
| return; |
| case 13: |
| SET_HIGH(ctr, value); |
| return; |
| } |
| break; |
| |
| case 2: |
| switch (offset) { |
| case 0: /* MMU Command */ |
| switch (value >> 5) { |
| case 0: /* no-op */ |
| break; |
| case 1: /* Allocate for TX. */ |
| s->tx_alloc = 0x80; |
| s->int_level &= ~INT_ALLOC; |
| smc91c111_update(s); |
| smc91c111_tx_alloc(s); |
| break; |
| case 2: /* Reset MMU. */ |
| s->allocated = 0; |
| s->tx_fifo_len = 0; |
| s->tx_fifo_done_len = 0; |
| s->rx_fifo_len = 0; |
| s->tx_alloc = 0; |
| break; |
| case 3: /* Remove from RX FIFO. */ |
| smc91c111_pop_rx_fifo(s); |
| break; |
| case 4: /* Remove from RX FIFO and release. */ |
| if (s->rx_fifo_len > 0) { |
| smc91c111_release_packet(s, s->rx_fifo[0]); |
| } |
| smc91c111_pop_rx_fifo(s); |
| break; |
| case 5: /* Release. */ |
| smc91c111_release_packet(s, s->packet_num); |
| break; |
| case 6: /* Add to TX FIFO. */ |
| smc91c111_queue_tx(s, s->packet_num); |
| break; |
| case 7: /* Reset TX FIFO. */ |
| s->tx_fifo_len = 0; |
| s->tx_fifo_done_len = 0; |
| break; |
| } |
| return; |
| case 1: |
| /* Ignore. */ |
| return; |
| case 2: /* Packet Number Register */ |
| s->packet_num = value; |
| return; |
| case 3: case 4: case 5: |
| /* Should be readonly, but linux writes to them anyway. Ignore. */ |
| return; |
| case 6: /* Pointer */ |
| SET_LOW(ptr, value); |
| return; |
| case 7: |
| SET_HIGH(ptr, value); |
| return; |
| case 8: case 9: case 10: case 11: /* Data */ |
| { |
| int p; |
| int n; |
| |
| if (s->ptr & 0x8000) |
| n = s->rx_fifo[0]; |
| else |
| n = s->packet_num; |
| p = s->ptr & 0x07ff; |
| if (s->ptr & 0x4000) { |
| s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff); |
| } else { |
| p += (offset & 3); |
| } |
| s->data[n][p] = value; |
| } |
| return; |
| case 12: /* Interrupt ACK. */ |
| s->int_level &= ~(value & 0xd6); |
| if (value & INT_TX) |
| smc91c111_pop_tx_fifo_done(s); |
| smc91c111_update(s); |
| return; |
| case 13: /* Interrupt mask. */ |
| s->int_mask = value; |
| smc91c111_update(s); |
| return; |
| } |
| break; |
| |
| case 3: |
| switch (offset) { |
| case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7: |
| /* Multicast table. */ |
| /* Not implemented. */ |
| return; |
| case 8: case 9: /* Management Interface. */ |
| /* Not implemented. */ |
| return; |
| case 12: /* Early receive. */ |
| s->ercv = value & 0x1f; |
| return; |
| case 13: |
| /* Ignore. */ |
| return; |
| } |
| break; |
| } |
| qemu_log_mask(LOG_GUEST_ERROR, "smc91c111_write(bank:%d) Illegal register" |
| " 0x%" HWADDR_PRIx " = 0x%x\n", |
| s->bank, offset, value); |
| } |
| |
| static uint32_t smc91c111_readb(void *opaque, hwaddr offset) |
| { |
| smc91c111_state *s = (smc91c111_state *)opaque; |
| |
| offset = offset & 0xf; |
| if (offset == 14) { |
| return s->bank; |
| } |
| if (offset == 15) |
| return 0x33; |
| switch (s->bank) { |
| case 0: |
| switch (offset) { |
| case 0: /* TCR */ |
| return s->tcr & 0xff; |
| case 1: |
| return s->tcr >> 8; |
| case 2: /* EPH Status */ |
| return 0; |
| case 3: |
| return 0x40; |
| case 4: /* RCR */ |
| return s->rcr & 0xff; |
| case 5: |
| return s->rcr >> 8; |
| case 6: /* Counter */ |
| case 7: |
| /* Not implemented. */ |
| return 0; |
| case 8: /* Memory size. */ |
| return NUM_PACKETS; |
| case 9: /* Free memory available. */ |
| { |
| int i; |
| int n; |
| n = 0; |
| for (i = 0; i < NUM_PACKETS; i++) { |
| if (s->allocated & (1 << i)) |
| n++; |
| } |
| return n; |
| } |
| case 10: case 11: /* RPCR */ |
| /* Not implemented. */ |
| return 0; |
| case 12: case 13: /* Reserved */ |
| return 0; |
| } |
| break; |
| |
| case 1: |
| switch (offset) { |
| case 0: /* CONFIG */ |
| return s->cr & 0xff; |
| case 1: |
| return s->cr >> 8; |
| case 2: case 3: /* BASE */ |
| /* Not implemented. */ |
| return 0; |
| case 4: case 5: case 6: case 7: case 8: case 9: /* IA */ |
| return s->conf.macaddr.a[offset - 4]; |
| case 10: /* General Purpose */ |
| return s->gpr & 0xff; |
| case 11: |
| return s->gpr >> 8; |
| case 12: /* Control */ |
| return s->ctr & 0xff; |
| case 13: |
| return s->ctr >> 8; |
| } |
| break; |
| |
| case 2: |
| switch (offset) { |
| case 0: case 1: /* MMUCR Busy bit. */ |
| return 0; |
| case 2: /* Packet Number. */ |
| return s->packet_num; |
| case 3: /* Allocation Result. */ |
| return s->tx_alloc; |
| case 4: /* TX FIFO */ |
| if (s->tx_fifo_done_len == 0) |
| return 0x80; |
| else |
| return s->tx_fifo_done[0]; |
| case 5: /* RX FIFO */ |
| if (s->rx_fifo_len == 0) |
| return 0x80; |
| else |
| return s->rx_fifo[0]; |
| case 6: /* Pointer */ |
| return s->ptr & 0xff; |
| case 7: |
| return (s->ptr >> 8) & 0xf7; |
| case 8: case 9: case 10: case 11: /* Data */ |
| { |
| int p; |
| int n; |
| |
| if (s->ptr & 0x8000) |
| n = s->rx_fifo[0]; |
| else |
| n = s->packet_num; |
| p = s->ptr & 0x07ff; |
| if (s->ptr & 0x4000) { |
| s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff); |
| } else { |
| p += (offset & 3); |
| } |
| return s->data[n][p]; |
| } |
| case 12: /* Interrupt status. */ |
| return s->int_level; |
| case 13: /* Interrupt mask. */ |
| return s->int_mask; |
| } |
| break; |
| |
| case 3: |
| switch (offset) { |
| case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7: |
| /* Multicast table. */ |
| /* Not implemented. */ |
| return 0; |
| case 8: /* Management Interface. */ |
| /* Not implemented. */ |
| return 0x30; |
| case 9: |
| return 0x33; |
| case 10: /* Revision. */ |
| return 0x91; |
| case 11: |
| return 0x33; |
| case 12: |
| return s->ercv; |
| case 13: |
| return 0; |
| } |
| break; |
| } |
| qemu_log_mask(LOG_GUEST_ERROR, "smc91c111_read(bank:%d) Illegal register" |
| " 0x%" HWADDR_PRIx "\n", |
| s->bank, offset); |
| return 0; |
| } |
| |
| static uint64_t smc91c111_readfn(void *opaque, hwaddr addr, unsigned size) |
| { |
| int i; |
| uint32_t val = 0; |
| |
| for (i = 0; i < size; i++) { |
| val |= smc91c111_readb(opaque, addr + i) << (i * 8); |
| } |
| return val; |
| } |
| |
| static void smc91c111_writefn(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| int i = 0; |
| |
| /* 32-bit writes to offset 0xc only actually write to the bank select |
| * register (offset 0xe), so skip the first two bytes we would write. |
| */ |
| if (addr == 0xc && size == 4) { |
| i += 2; |
| } |
| |
| for (; i < size; i++) { |
| smc91c111_writeb(opaque, addr + i, |
| extract32(value, i * 8, 8)); |
| } |
| } |
| |
| static bool smc91c111_can_receive_nc(NetClientState *nc) |
| { |
| smc91c111_state *s = qemu_get_nic_opaque(nc); |
| |
| return smc91c111_can_receive(s); |
| } |
| |
| static ssize_t smc91c111_receive(NetClientState *nc, const uint8_t *buf, size_t size) |
| { |
| smc91c111_state *s = qemu_get_nic_opaque(nc); |
| int status; |
| int packetsize; |
| uint32_t crc; |
| int packetnum; |
| uint8_t *p; |
| |
| if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST)) |
| return -1; |
| /* Short packets are padded with zeros. Receiving a packet |
| < 64 bytes long is considered an error condition. */ |
| if (size < 64) |
| packetsize = 64; |
| else |
| packetsize = (size & ~1); |
| packetsize += 6; |
| crc = (s->rcr & RCR_STRIP_CRC) == 0; |
| if (crc) |
| packetsize += 4; |
| /* TODO: Flag overrun and receive errors. */ |
| if (packetsize > 2048) |
| return -1; |
| packetnum = smc91c111_allocate_packet(s); |
| if (packetnum == 0x80) |
| return -1; |
| s->rx_fifo[s->rx_fifo_len++] = packetnum; |
| |
| p = &s->data[packetnum][0]; |
| /* ??? Multicast packets? */ |
| status = 0; |
| if (size > 1518) |
| status |= RS_TOOLONG; |
| if (size & 1) |
| status |= RS_ODDFRAME; |
| *(p++) = status & 0xff; |
| *(p++) = status >> 8; |
| *(p++) = packetsize & 0xff; |
| *(p++) = packetsize >> 8; |
| memcpy(p, buf, size & ~1); |
| p += (size & ~1); |
| /* Pad short packets. */ |
| if (size < 64) { |
| int pad; |
| |
| if (size & 1) |
| *(p++) = buf[size - 1]; |
| pad = 64 - size; |
| memset(p, 0, pad); |
| p += pad; |
| size = 64; |
| } |
| /* It's not clear if the CRC should go before or after the last byte in |
| odd sized packets. Linux disables the CRC, so that's no help. |
| The pictures in the documentation show the CRC aligned on a 16-bit |
| boundary before the last odd byte, so that's what we do. */ |
| if (crc) { |
| crc = crc32(~0, buf, size); |
| *(p++) = crc & 0xff; crc >>= 8; |
| *(p++) = crc & 0xff; crc >>= 8; |
| *(p++) = crc & 0xff; crc >>= 8; |
| *(p++) = crc & 0xff; |
| } |
| if (size & 1) { |
| *(p++) = buf[size - 1]; |
| *p = 0x60; |
| } else { |
| *(p++) = 0; |
| *p = 0x40; |
| } |
| /* TODO: Raise early RX interrupt? */ |
| s->int_level |= INT_RCV; |
| smc91c111_update(s); |
| |
| return size; |
| } |
| |
| static const MemoryRegionOps smc91c111_mem_ops = { |
| /* The special case for 32 bit writes to 0xc means we can't just |
| * set .impl.min/max_access_size to 1, unfortunately |
| */ |
| .read = smc91c111_readfn, |
| .write = smc91c111_writefn, |
| .valid.min_access_size = 1, |
| .valid.max_access_size = 4, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static NetClientInfo net_smc91c111_info = { |
| .type = NET_CLIENT_DRIVER_NIC, |
| .size = sizeof(NICState), |
| .can_receive = smc91c111_can_receive_nc, |
| .receive = smc91c111_receive, |
| }; |
| |
| static void smc91c111_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| smc91c111_state *s = SMC91C111(dev); |
| |
| memory_region_init_io(&s->mmio, OBJECT(s), &smc91c111_mem_ops, s, |
| "smc91c111-mmio", 16); |
| sysbus_init_mmio(sbd, &s->mmio); |
| sysbus_init_irq(sbd, &s->irq); |
| qemu_macaddr_default_if_unset(&s->conf.macaddr); |
| s->nic = qemu_new_nic(&net_smc91c111_info, &s->conf, |
| object_get_typename(OBJECT(dev)), dev->id, s); |
| qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); |
| /* ??? Save/restore. */ |
| } |
| |
| static Property smc91c111_properties[] = { |
| DEFINE_NIC_PROPERTIES(smc91c111_state, conf), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void smc91c111_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = smc91c111_realize; |
| dc->reset = smc91c111_reset; |
| dc->vmsd = &vmstate_smc91c111; |
| device_class_set_props(dc, smc91c111_properties); |
| } |
| |
| static const TypeInfo smc91c111_info = { |
| .name = TYPE_SMC91C111, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(smc91c111_state), |
| .class_init = smc91c111_class_init, |
| }; |
| |
| static void smc91c111_register_types(void) |
| { |
| type_register_static(&smc91c111_info); |
| } |
| |
| /* Legacy helper function. Should go away when machine config files are |
| implemented. */ |
| void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq) |
| { |
| DeviceState *dev; |
| SysBusDevice *s; |
| |
| qemu_check_nic_model(nd, "smc91c111"); |
| dev = qdev_new(TYPE_SMC91C111); |
| qdev_set_nic_properties(dev, nd); |
| s = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(s, &error_fatal); |
| sysbus_mmio_map(s, 0, base); |
| sysbus_connect_irq(s, 0, irq); |
| } |
| |
| type_init(smc91c111_register_types) |