| # See docs/devel/tracing.txt for syntax documentation. |
| |
| # fdc.c |
| fdc_ioport_read(uint8_t reg, uint8_t value) "read reg 0x%02x val 0x%02x" |
| fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x" |
| |
| # pflash_cfi02.c |
| # pflash_cfi01.c |
| pflash_reset(void) "reset" |
| pflash_timer_expired(uint8_t cmd) "command 0x%02x done" |
| pflash_io_read(uint64_t offset, unsigned size, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x cmd:0x%02x wcycle:%u" |
| pflash_io_write(uint64_t offset, unsigned size, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x wcycle:%u" |
| pflash_data_read(uint64_t offset, unsigned size, uint32_t value) "data offset:0x%04"PRIx64" size:%u value:0x%04x" |
| pflash_data_write(uint64_t offset, unsigned size, uint32_t value, uint64_t counter) "data offset:0x%04"PRIx64" size:%u value:0x%04x counter:0x%016"PRIx64 |
| pflash_manufacturer_id(uint16_t id) "Read Manufacturer ID: 0x%04x" |
| pflash_device_id(uint16_t id) "Read Device ID: 0x%04x" |
| pflash_device_info(uint64_t offset) "Read Device Information offset:0x%04"PRIx64 |
| |
| # virtio-blk.c |
| virtio_blk_req_complete(void *vdev, void *req, int status) "vdev %p req %p status %d" |
| virtio_blk_rw_complete(void *vdev, void *req, int ret) "vdev %p req %p ret %d" |
| virtio_blk_handle_write(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu" |
| virtio_blk_handle_read(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu" |
| virtio_blk_submit_multireq(void *vdev, void *mrb, int start, int num_reqs, uint64_t offset, size_t size, bool is_write) "vdev %p mrb %p start %d num_reqs %d offset %"PRIu64" size %zu is_write %d" |
| |
| # hd-geometry.c |
| hd_geometry_lchs_guess(void *blk, int cyls, int heads, int secs) "blk %p LCHS %d %d %d" |
| hd_geometry_guess(void *blk, uint32_t cyls, uint32_t heads, uint32_t secs, int trans) "blk %p CHS %u %u %u trans %d" |
| |
| # nvme.c |
| # nvme traces for successful events |
| nvme_irq_msix(uint32_t vector) "raising MSI-X IRQ vector %u" |
| nvme_irq_pin(void) "pulsing IRQ pin" |
| nvme_irq_masked(void) "IRQ is masked" |
| nvme_dma_read(uint64_t prp1, uint64_t prp2) "DMA read, prp1=0x%"PRIx64" prp2=0x%"PRIx64"" |
| nvme_rw(const char *verb, uint32_t blk_count, uint64_t byte_count, uint64_t lba) "%s %"PRIu32" blocks (%"PRIu64" bytes) from LBA %"PRIu64"" |
| nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16"" |
| nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d" |
| nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16"" |
| nvme_del_cq(uint16_t cqid) "deleted completion queue, cqid=%"PRIu16"" |
| nvme_identify_ctrl(void) "identify controller" |
| nvme_identify_ns(uint16_t ns) "identify namespace, nsid=%"PRIu16"" |
| nvme_identify_nslist(uint16_t ns) "identify namespace list, nsid=%"PRIu16"" |
| nvme_getfeat_vwcache(const char* result) "get feature volatile write cache, result=%s" |
| nvme_getfeat_numq(int result) "get feature number of queues, result=%d" |
| nvme_setfeat_numq(int reqcq, int reqsq, int gotcq, int gotsq) "requested cq_count=%d sq_count=%d, responding with cq_count=%d sq_count=%d" |
| nvme_setfeat_timestamp(uint64_t ts) "set feature timestamp = 0x%"PRIx64"" |
| nvme_getfeat_timestamp(uint64_t ts) "get feature timestamp = 0x%"PRIx64"" |
| nvme_mmio_intm_set(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask set, data=0x%"PRIx64", new_mask=0x%"PRIx64"" |
| nvme_mmio_intm_clr(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask clr, data=0x%"PRIx64", new_mask=0x%"PRIx64"" |
| nvme_mmio_cfg(uint64_t data) "wrote MMIO, config controller config=0x%"PRIx64"" |
| nvme_mmio_aqattr(uint64_t data) "wrote MMIO, admin queue attributes=0x%"PRIx64"" |
| nvme_mmio_asqaddr(uint64_t data) "wrote MMIO, admin submission queue address=0x%"PRIx64"" |
| nvme_mmio_acqaddr(uint64_t data) "wrote MMIO, admin completion queue address=0x%"PRIx64"" |
| nvme_mmio_asqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin submission queue high half=0x%"PRIx64", new_address=0x%"PRIx64"" |
| nvme_mmio_acqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin completion queue high half=0x%"PRIx64", new_address=0x%"PRIx64"" |
| nvme_mmio_start_success(void) "setting controller enable bit succeeded" |
| nvme_mmio_stopped(void) "cleared controller enable bit" |
| nvme_mmio_shutdown_set(void) "shutdown bit set" |
| nvme_mmio_shutdown_cleared(void) "shutdown bit cleared" |
| |
| # nvme traces for error conditions |
| nvme_err_invalid_dma(void) "PRP/SGL is too small for transfer size" |
| nvme_err_invalid_prplist_ent(uint64_t prplist) "PRP list entry is null or not page aligned: 0x%"PRIx64"" |
| nvme_err_invalid_prp2_align(uint64_t prp2) "PRP2 is not page aligned: 0x%"PRIx64"" |
| nvme_err_invalid_prp2_missing(void) "PRP2 is null and more data to be transferred" |
| nvme_err_invalid_prp(void) "invalid PRP" |
| nvme_err_invalid_ns(uint32_t ns, uint32_t limit) "invalid namespace %u not within 1-%u" |
| nvme_err_invalid_opc(uint8_t opc) "invalid opcode 0x%"PRIx8"" |
| nvme_err_invalid_admin_opc(uint8_t opc) "invalid admin opcode 0x%"PRIx8"" |
| nvme_err_invalid_lba_range(uint64_t start, uint64_t len, uint64_t limit) "Invalid LBA start=%"PRIu64" len=%"PRIu64" limit=%"PRIu64"" |
| nvme_err_invalid_del_sq(uint16_t qid) "invalid submission queue deletion, sid=%"PRIu16"" |
| nvme_err_invalid_create_sq_cqid(uint16_t cqid) "failed creating submission queue, invalid cqid=%"PRIu16"" |
| nvme_err_invalid_create_sq_sqid(uint16_t sqid) "failed creating submission queue, invalid sqid=%"PRIu16"" |
| nvme_err_invalid_create_sq_size(uint16_t qsize) "failed creating submission queue, invalid qsize=%"PRIu16"" |
| nvme_err_invalid_create_sq_addr(uint64_t addr) "failed creating submission queue, addr=0x%"PRIx64"" |
| nvme_err_invalid_create_sq_qflags(uint16_t qflags) "failed creating submission queue, qflags=%"PRIu16"" |
| nvme_err_invalid_del_cq_cqid(uint16_t cqid) "failed deleting completion queue, cqid=%"PRIu16"" |
| nvme_err_invalid_del_cq_notempty(uint16_t cqid) "failed deleting completion queue, it is not empty, cqid=%"PRIu16"" |
| nvme_err_invalid_create_cq_cqid(uint16_t cqid) "failed creating completion queue, cqid=%"PRIu16"" |
| nvme_err_invalid_create_cq_size(uint16_t size) "failed creating completion queue, size=%"PRIu16"" |
| nvme_err_invalid_create_cq_addr(uint64_t addr) "failed creating completion queue, addr=0x%"PRIx64"" |
| nvme_err_invalid_create_cq_vector(uint16_t vector) "failed creating completion queue, vector=%"PRIu16"" |
| nvme_err_invalid_create_cq_qflags(uint16_t qflags) "failed creating completion queue, qflags=%"PRIu16"" |
| nvme_err_invalid_identify_cns(uint16_t cns) "identify, invalid cns=0x%"PRIx16"" |
| nvme_err_invalid_getfeat(int dw10) "invalid get features, dw10=0x%"PRIx32"" |
| nvme_err_invalid_setfeat(uint32_t dw10) "invalid set features, dw10=0x%"PRIx32"" |
| nvme_err_startfail_cq(void) "nvme_start_ctrl failed because there are non-admin completion queues" |
| nvme_err_startfail_sq(void) "nvme_start_ctrl failed because there are non-admin submission queues" |
| nvme_err_startfail_nbarasq(void) "nvme_start_ctrl failed because the admin submission queue address is null" |
| nvme_err_startfail_nbaracq(void) "nvme_start_ctrl failed because the admin completion queue address is null" |
| nvme_err_startfail_asq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin submission queue address is misaligned: 0x%"PRIx64"" |
| nvme_err_startfail_acq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin completion queue address is misaligned: 0x%"PRIx64"" |
| nvme_err_startfail_page_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too small: log2size=%u, min=%u" |
| nvme_err_startfail_page_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too large: log2size=%u, max=%u" |
| nvme_err_startfail_cqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too small: log2size=%u, min=%u" |
| nvme_err_startfail_cqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too large: log2size=%u, max=%u" |
| nvme_err_startfail_sqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too small: log2size=%u, min=%u" |
| nvme_err_startfail_sqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too large: log2size=%u, max=%u" |
| nvme_err_startfail_asqent_sz_zero(void) "nvme_start_ctrl failed because the admin submission queue size is zero" |
| nvme_err_startfail_acqent_sz_zero(void) "nvme_start_ctrl failed because the admin completion queue size is zero" |
| nvme_err_startfail(void) "setting controller enable bit failed" |
| |
| # Traces for undefined behavior |
| nvme_ub_mmiowr_misaligned32(uint64_t offset) "MMIO write not 32-bit aligned, offset=0x%"PRIx64"" |
| nvme_ub_mmiowr_toosmall(uint64_t offset, unsigned size) "MMIO write smaller than 32 bits, offset=0x%"PRIx64", size=%u" |
| nvme_ub_mmiowr_intmask_with_msix(void) "undefined access to interrupt mask set when MSI-X is enabled" |
| nvme_ub_mmiowr_ro_csts(void) "attempted to set a read only bit of controller status" |
| nvme_ub_mmiowr_ssreset_w1c_unsupported(void) "attempted to W1C CSTS.NSSRO but CAP.NSSRS is zero (not supported)" |
| nvme_ub_mmiowr_ssreset_unsupported(void) "attempted NVM subsystem reset but CAP.NSSRS is zero (not supported)" |
| nvme_ub_mmiowr_cmbloc_reserved(void) "invalid write to reserved CMBLOC when CMBSZ is zero, ignored" |
| nvme_ub_mmiowr_cmbsz_readonly(void) "invalid write to read only CMBSZ, ignored" |
| nvme_ub_mmiowr_pmrcap_readonly(void) "invalid write to read only PMRCAP, ignored" |
| nvme_ub_mmiowr_pmrsts_readonly(void) "invalid write to read only PMRSTS, ignored" |
| nvme_ub_mmiowr_pmrebs_readonly(void) "invalid write to read only PMREBS, ignored" |
| nvme_ub_mmiowr_pmrswtp_readonly(void) "invalid write to read only PMRSWTP, ignored" |
| nvme_ub_mmiowr_invalid(uint64_t offset, uint64_t data) "invalid MMIO write, offset=0x%"PRIx64", data=0x%"PRIx64"" |
| nvme_ub_mmiord_misaligned32(uint64_t offset) "MMIO read not 32-bit aligned, offset=0x%"PRIx64"" |
| nvme_ub_mmiord_toosmall(uint64_t offset) "MMIO read smaller than 32-bits, offset=0x%"PRIx64"" |
| nvme_ub_mmiord_invalid_ofs(uint64_t offset) "MMIO read beyond last register, offset=0x%"PRIx64", returning 0" |
| nvme_ub_db_wr_misaligned(uint64_t offset) "doorbell write not 32-bit aligned, offset=0x%"PRIx64", ignoring" |
| nvme_ub_db_wr_invalid_cq(uint32_t qid) "completion queue doorbell write for nonexistent queue, cqid=%"PRIu32", ignoring" |
| nvme_ub_db_wr_invalid_cqhead(uint32_t qid, uint16_t new_head) "completion queue doorbell write value beyond queue size, cqid=%"PRIu32", new_head=%"PRIu16", ignoring" |
| nvme_ub_db_wr_invalid_sq(uint32_t qid) "submission queue doorbell write for nonexistent queue, sqid=%"PRIu32", ignoring" |
| nvme_ub_db_wr_invalid_sqtail(uint32_t qid, uint16_t new_tail) "submission queue doorbell write value beyond queue size, sqid=%"PRIu32", new_head=%"PRIu16", ignoring" |
| |
| # xen-block.c |
| xen_block_realize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u" |
| xen_block_connect(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u" |
| xen_block_disconnect(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u" |
| xen_block_unrealize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u" |
| xen_block_size(const char *type, uint32_t disk, uint32_t partition, int64_t sectors) "%s d%up%u %"PRIi64 |
| xen_disk_realize(void) "" |
| xen_disk_unrealize(void) "" |
| xen_cdrom_realize(void) "" |
| xen_cdrom_unrealize(void) "" |
| xen_block_blockdev_add(char *str) "%s" |
| xen_block_blockdev_del(const char *node_name) "%s" |
| xen_block_device_create(unsigned int number) "%u" |
| xen_block_device_destroy(unsigned int number) "%u" |
| |
| # m25p80.c |
| m25p80_flash_erase(void *s, int offset, uint32_t len) "[%p] offset = 0x%"PRIx32", len = %u" |
| m25p80_programming_zero_to_one(void *s, uint32_t addr, uint8_t prev, uint8_t data) "[%p] programming zero to one! addr=0x%"PRIx32" 0x%"PRIx8" -> 0x%"PRIx8 |
| m25p80_reset_done(void *s) "[%p] Reset done." |
| m25p80_command_decoded(void *s, uint32_t cmd) "[%p] new command:0x%"PRIx32 |
| m25p80_complete_collecting(void *s, uint32_t cmd, int n, uint8_t ear, uint32_t cur_addr) "[%p] decode cmd: 0x%"PRIx32" len %d ear 0x%"PRIx8" addr 0x%"PRIx32 |
| m25p80_populated_jedec(void *s) "[%p] populated jedec code" |
| m25p80_chip_erase(void *s) "[%p] chip erase" |
| m25p80_select(void *s, const char *what) "[%p] %sselect" |
| m25p80_page_program(void *s, uint32_t addr, uint8_t tx) "[%p] page program cur_addr=0x%"PRIx32" data=0x%"PRIx8 |
| m25p80_transfer(void *s, uint8_t state, uint32_t len, uint8_t needed, uint32_t pos, uint32_t cur_addr, uint8_t t) "[%p] Transfer state 0x%"PRIx8" len 0x%"PRIx32" needed 0x%"PRIx8" pos 0x%"PRIx32" addr 0x%"PRIx32" tx 0x%"PRIx8 |
| m25p80_read_byte(void *s, uint32_t addr, uint8_t v) "[%p] Read byte 0x%"PRIx32"=0x%"PRIx8 |
| m25p80_read_data(void *s, uint32_t pos, uint8_t v) "[%p] Read data 0x%"PRIx32"=0x%"PRIx8 |
| m25p80_binding(void *s) "[%p] Binding to IF_MTD drive" |
| m25p80_binding_no_bdrv(void *s) "[%p] No BDRV - binding to RAM" |
