| /* | |
| * RDMA protocol and interfaces | |
| * | |
| * Copyright IBM, Corp. 2010-2013 | |
| * Copyright Red Hat, Inc. 2015-2016 | |
| * | |
| * Authors: | |
| * Michael R. Hines <mrhines@us.ibm.com> | |
| * Jiuxing Liu <jl@us.ibm.com> | |
| * Daniel P. Berrange <berrange@redhat.com> | |
| * | |
| * This work is licensed under the terms of the GNU GPL, version 2 or | |
| * later. See the COPYING file in the top-level directory. | |
| * | |
| */ | |
| #include "qemu/osdep.h" | |
| #include "channel.h" | |
| #include "qapi/error.h" | |
| #include "qemu/cutils.h" | |
| #include "channel.h" | |
| #include "exec/target_page.h" | |
| #include "rdma.h" | |
| #include "migration.h" | |
| #include "migration-stats.h" | |
| #include "qemu-file.h" | |
| #include "ram.h" | |
| #include "qemu/error-report.h" | |
| #include "qemu/main-loop.h" | |
| #include "qemu/module.h" | |
| #include "qemu/rcu.h" | |
| #include "qemu/sockets.h" | |
| #include "qemu/coroutine.h" | |
| #include "system/memory.h" | |
| #include <sys/socket.h> | |
| #include <netdb.h> | |
| #include <arpa/inet.h> | |
| #include <rdma/rdma_cma.h> | |
| #include "trace.h" | |
| #include "qom/object.h" | |
| #include "options.h" | |
| #include <poll.h> | |
| #define RDMA_RESOLVE_TIMEOUT_MS 10000 | |
| /* Do not merge data if larger than this. */ | |
| static inline uint64_t rdma_merge_max(void) | |
| { | |
| return migrate_rdma_chunk_size() * 2; | |
| } | |
| #define RDMA_SIGNALED_SEND_MAX 512 | |
| /* | |
| * This is only for non-live state being migrated. | |
| * Instead of RDMA_WRITE messages, we use RDMA_SEND | |
| * messages for that state, which requires a different | |
| * delivery design than main memory. | |
| */ | |
| #define RDMA_SEND_INCREMENT 32768 | |
| /* | |
| * Maximum size infiniband SEND message | |
| */ | |
| #define RDMA_CONTROL_MAX_BUFFER (512 * 1024) | |
| #define RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE 4096 | |
| #define RDMA_CONTROL_VERSION_CURRENT 1 | |
| /* | |
| * Capabilities for negotiation. | |
| */ | |
| #define RDMA_CAPABILITY_PIN_ALL 0x01 | |
| /* | |
| * Add the other flags above to this list of known capabilities | |
| * as they are introduced. | |
| */ | |
| static uint32_t known_capabilities = RDMA_CAPABILITY_PIN_ALL; | |
| /* | |
| * A work request ID is 64-bits and we split up these bits | |
| * into 3 parts: | |
| * | |
| * bits 0-15 : type of control message, 2^16 | |
| * bits 16-29: ram block index, 2^14 | |
| * bits 30-63: ram block chunk number, 2^34 | |
| * | |
| * The last two bit ranges are only used for RDMA writes, | |
| * in order to track their completion and potentially | |
| * also track unregistration status of the message. | |
| */ | |
| #define RDMA_WRID_TYPE_SHIFT 0UL | |
| #define RDMA_WRID_BLOCK_SHIFT 16UL | |
| #define RDMA_WRID_CHUNK_SHIFT 30UL | |
| #define RDMA_WRID_TYPE_MASK \ | |
| ((1UL << RDMA_WRID_BLOCK_SHIFT) - 1UL) | |
| #define RDMA_WRID_BLOCK_MASK \ | |
| (~RDMA_WRID_TYPE_MASK & ((1UL << RDMA_WRID_CHUNK_SHIFT) - 1UL)) | |
| #define RDMA_WRID_CHUNK_MASK (~RDMA_WRID_BLOCK_MASK & ~RDMA_WRID_TYPE_MASK) | |
| /* | |
| * RDMA migration protocol: | |
| * 1. RDMA Writes (data messages, i.e. RAM) | |
| * 2. IB Send/Recv (control channel messages) | |
| */ | |
| enum { | |
| RDMA_WRID_NONE = 0, | |
| RDMA_WRID_RDMA_WRITE = 1, | |
| RDMA_WRID_SEND_CONTROL = 2000, | |
| RDMA_WRID_RECV_CONTROL = 4000, | |
| }; | |
| /* | |
| * Work request IDs for IB SEND messages only (not RDMA writes). | |
| * This is used by the migration protocol to transmit | |
| * control messages (such as device state and registration commands) | |
| * | |
| * We could use more WRs, but we have enough for now. | |
| */ | |
| enum { | |
| RDMA_WRID_READY = 0, | |
| RDMA_WRID_DATA, | |
| RDMA_WRID_CONTROL, | |
| RDMA_WRID_MAX, | |
| }; | |
| /* | |
| * SEND/RECV IB Control Messages. | |
| */ | |
| enum { | |
| RDMA_CONTROL_NONE = 0, | |
| RDMA_CONTROL_ERROR, | |
| RDMA_CONTROL_READY, /* ready to receive */ | |
| RDMA_CONTROL_QEMU_FILE, /* QEMUFile-transmitted bytes */ | |
| RDMA_CONTROL_RAM_BLOCKS_REQUEST, /* RAMBlock synchronization */ | |
| RDMA_CONTROL_RAM_BLOCKS_RESULT, /* RAMBlock synchronization */ | |
| RDMA_CONTROL_COMPRESS, /* page contains repeat values */ | |
| RDMA_CONTROL_REGISTER_REQUEST, /* dynamic page registration */ | |
| RDMA_CONTROL_REGISTER_RESULT, /* key to use after registration */ | |
| RDMA_CONTROL_REGISTER_FINISHED, /* current iteration finished */ | |
| RDMA_CONTROL_NUM, | |
| }; | |
| /* | |
| * Memory and MR structures used to represent an IB Send/Recv work request. | |
| * This is *not* used for RDMA writes, only IB Send/Recv. | |
| */ | |
| typedef struct { | |
| uint8_t control[RDMA_CONTROL_MAX_BUFFER]; /* actual buffer to register */ | |
| struct ibv_mr *control_mr; /* registration metadata */ | |
| size_t control_len; /* length of the message */ | |
| uint8_t *control_curr; /* start of unconsumed bytes */ | |
| } RDMAWorkRequestData; | |
| /* | |
| * Negotiate RDMA capabilities during connection-setup time. | |
| */ | |
| typedef struct { | |
| uint32_t version; | |
| uint32_t flags; | |
| } RDMACapabilities; | |
| static void caps_to_network(RDMACapabilities *cap) | |
| { | |
| cap->version = htonl(cap->version); | |
| cap->flags = htonl(cap->flags); | |
| } | |
| static void network_to_caps(RDMACapabilities *cap) | |
| { | |
| cap->version = ntohl(cap->version); | |
| cap->flags = ntohl(cap->flags); | |
| } | |
| /* | |
| * Representation of a RAMBlock from an RDMA perspective. | |
| * This is not transmitted, only local. | |
| * This and subsequent structures cannot be linked lists | |
| * because we're using a single IB message to transmit | |
| * the information. It's small anyway, so a list is overkill. | |
| */ | |
| typedef struct RDMALocalBlock { | |
| char *block_name; | |
| uint8_t *local_host_addr; /* local virtual address */ | |
| uint64_t remote_host_addr; /* remote virtual address */ | |
| uint64_t offset; | |
| uint64_t length; | |
| struct ibv_mr **pmr; /* MRs for chunk-level registration */ | |
| struct ibv_mr *mr; /* MR for non-chunk-level registration */ | |
| uint32_t *remote_keys; /* rkeys for chunk-level registration */ | |
| uint32_t remote_rkey; /* rkeys for non-chunk-level registration */ | |
| int index; /* which block are we */ | |
| unsigned int src_index; /* (Only used on dest) */ | |
| int nb_chunks; | |
| } RDMALocalBlock; | |
| /* | |
| * Also represents a RAMblock, but only on the dest. | |
| * This gets transmitted by the dest during connection-time | |
| * to the source VM and then is used to populate the | |
| * corresponding RDMALocalBlock with | |
| * the information needed to perform the actual RDMA. | |
| */ | |
| typedef struct QEMU_PACKED RDMADestBlock { | |
| uint64_t remote_host_addr; | |
| uint64_t offset; | |
| uint64_t length; | |
| uint32_t remote_rkey; | |
| uint32_t padding; | |
| } RDMADestBlock; | |
| static const char *control_desc(unsigned int rdma_control) | |
| { | |
| static const char *strs[] = { | |
| [RDMA_CONTROL_NONE] = "NONE", | |
| [RDMA_CONTROL_ERROR] = "ERROR", | |
| [RDMA_CONTROL_READY] = "READY", | |
| [RDMA_CONTROL_QEMU_FILE] = "QEMU FILE", | |
| [RDMA_CONTROL_RAM_BLOCKS_REQUEST] = "RAM BLOCKS REQUEST", | |
| [RDMA_CONTROL_RAM_BLOCKS_RESULT] = "RAM BLOCKS RESULT", | |
| [RDMA_CONTROL_COMPRESS] = "COMPRESS", | |
| [RDMA_CONTROL_REGISTER_REQUEST] = "REGISTER REQUEST", | |
| [RDMA_CONTROL_REGISTER_RESULT] = "REGISTER RESULT", | |
| [RDMA_CONTROL_REGISTER_FINISHED] = "REGISTER FINISHED", | |
| }; | |
| if (rdma_control >= RDMA_CONTROL_NUM) { | |
| return "??BAD CONTROL VALUE??"; | |
| } | |
| return strs[rdma_control]; | |
| } | |
| #if !defined(CONFIG_ARPA_INET_64) | |
| static uint64_t htonll(uint64_t v) | |
| { | |
| union { uint32_t lv[2]; uint64_t llv; } u; | |
| u.lv[0] = htonl(v >> 32); | |
| u.lv[1] = htonl(v & 0xFFFFFFFFULL); | |
| return u.llv; | |
| } | |
| static uint64_t ntohll(uint64_t v) | |
| { | |
| union { uint32_t lv[2]; uint64_t llv; } u; | |
| u.llv = v; | |
| return ((uint64_t)ntohl(u.lv[0]) << 32) | (uint64_t) ntohl(u.lv[1]); | |
| } | |
| #endif | |
| static void dest_block_to_network(RDMADestBlock *db) | |
| { | |
| db->remote_host_addr = htonll(db->remote_host_addr); | |
| db->offset = htonll(db->offset); | |
| db->length = htonll(db->length); | |
| db->remote_rkey = htonl(db->remote_rkey); | |
| } | |
| static void network_to_dest_block(RDMADestBlock *db) | |
| { | |
| db->remote_host_addr = ntohll(db->remote_host_addr); | |
| db->offset = ntohll(db->offset); | |
| db->length = ntohll(db->length); | |
| db->remote_rkey = ntohl(db->remote_rkey); | |
| } | |
| /* | |
| * Virtual address of the above structures used for transmitting | |
| * the RAMBlock descriptions at connection-time. | |
| * This structure is *not* transmitted. | |
| */ | |
| typedef struct RDMALocalBlocks { | |
| int nb_blocks; | |
| RDMALocalBlock *block; | |
| } RDMALocalBlocks; | |
| /* | |
| * Main data structure for RDMA state. | |
| * While there is only one copy of this structure being allocated right now, | |
| * this is the place where one would start if you wanted to consider | |
| * having more than one RDMA connection open at the same time. | |
| */ | |
| typedef struct RDMAContext { | |
| char *host; | |
| int port; | |
| RDMAWorkRequestData wr_data[RDMA_WRID_MAX]; | |
| /* | |
| * This is used by *_exchange_send() to figure out whether or not | |
| * the initial "READY" message has already been received or not. | |
| * This is because other functions may potentially poll() and detect | |
| * the READY message before send() does, in which case we need to | |
| * know if it completed. | |
| */ | |
| int control_ready_expected; | |
| /* number of outstanding writes */ | |
| int nb_sent; | |
| /* store info about current buffer so that we can | |
| merge it with future sends */ | |
| uint64_t current_addr; | |
| uint64_t current_length; | |
| /* index of ram block the current buffer belongs to */ | |
| int current_index; | |
| /* index of the chunk in the current ram block */ | |
| int current_chunk; | |
| bool pin_all; | |
| /* | |
| * infiniband-specific variables for opening the device | |
| * and maintaining connection state and so forth. | |
| * | |
| * cm_id also has ibv_context, rdma_event_channel, and ibv_qp in | |
| * cm_id->verbs, cm_id->channel, and cm_id->qp. | |
| */ | |
| struct rdma_cm_id *cm_id; /* connection manager ID */ | |
| struct rdma_cm_id *listen_id; | |
| bool connected; | |
| struct ibv_context *verbs; | |
| struct rdma_event_channel *channel; | |
| struct ibv_qp *qp; /* queue pair */ | |
| struct ibv_comp_channel *recv_comp_channel; /* recv completion channel */ | |
| struct ibv_comp_channel *send_comp_channel; /* send completion channel */ | |
| struct ibv_pd *pd; /* protection domain */ | |
| struct ibv_cq *recv_cq; /* recvieve completion queue */ | |
| struct ibv_cq *send_cq; /* send completion queue */ | |
| /* | |
| * If a previous write failed (perhaps because of a failed | |
| * memory registration, then do not attempt any future work | |
| * and remember the error state. | |
| */ | |
| bool errored; | |
| bool error_reported; | |
| bool received_error; | |
| /* | |
| * Description of ram blocks used throughout the code. | |
| */ | |
| RDMALocalBlocks local_ram_blocks; | |
| RDMADestBlock *dest_blocks; | |
| /* Index of the next RAMBlock received during block registration */ | |
| unsigned int next_src_index; | |
| /* | |
| * Migration on *destination* started. | |
| * Then use coroutine yield function. | |
| * Source runs in a thread, so we don't care. | |
| */ | |
| int migration_started_on_destination; | |
| int total_registrations; | |
| int total_writes; | |
| GHashTable *blockmap; | |
| /* the RDMAContext for return path */ | |
| struct RDMAContext *return_path; | |
| bool is_return_path; | |
| } RDMAContext; | |
| #define TYPE_QIO_CHANNEL_RDMA "qio-channel-rdma" | |
| OBJECT_DECLARE_SIMPLE_TYPE(QIOChannelRDMA, QIO_CHANNEL_RDMA) | |
| struct QIOChannelRDMA { | |
| QIOChannel parent; | |
| RDMAContext *rdmain; | |
| RDMAContext *rdmaout; | |
| bool blocking; /* XXX we don't actually honour this yet */ | |
| }; | |
| /* | |
| * Main structure for IB Send/Recv control messages. | |
| * This gets prepended at the beginning of every Send/Recv. | |
| */ | |
| typedef struct QEMU_PACKED { | |
| uint32_t len; /* Total length of data portion */ | |
| uint32_t type; /* which control command to perform */ | |
| uint32_t repeat; /* number of commands in data portion of same type */ | |
| uint32_t padding; | |
| } RDMAControlHeader; | |
| static void control_to_network(RDMAControlHeader *control) | |
| { | |
| control->type = htonl(control->type); | |
| control->len = htonl(control->len); | |
| control->repeat = htonl(control->repeat); | |
| } | |
| static void network_to_control(RDMAControlHeader *control) | |
| { | |
| control->type = ntohl(control->type); | |
| control->len = ntohl(control->len); | |
| control->repeat = ntohl(control->repeat); | |
| } | |
| /* | |
| * Register a single Chunk. | |
| * Information sent by the source VM to inform the dest | |
| * to register an single chunk of memory before we can perform | |
| * the actual RDMA operation. | |
| */ | |
| typedef struct QEMU_PACKED { | |
| uint64_t current_addr; /* offset into the ram_addr_t space */ | |
| uint32_t current_index; /* which ramblock the chunk belongs to */ | |
| uint32_t padding; | |
| uint64_t chunks; /* how many sequential chunks to register */ | |
| } RDMARegister; | |
| static bool rdma_errored(RDMAContext *rdma) | |
| { | |
| if (rdma->errored && !rdma->error_reported) { | |
| error_report("RDMA is in an error state waiting migration" | |
| " to abort!"); | |
| rdma->error_reported = true; | |
| } | |
| return rdma->errored; | |
| } | |
| static void register_to_network(RDMAContext *rdma, RDMARegister *reg) | |
| { | |
| RDMALocalBlock *local_block; | |
| local_block = &rdma->local_ram_blocks.block[reg->current_index]; | |
| /* | |
| * current_addr as passed in is an address in the local ram_addr_t | |
| * space, we need to translate this for the destination | |
| */ | |
| reg->current_addr -= local_block->offset; | |
| reg->current_addr += rdma->dest_blocks[reg->current_index].offset; | |
| reg->current_addr = htonll(reg->current_addr); | |
| reg->current_index = htonl(reg->current_index); | |
| reg->chunks = htonll(reg->chunks); | |
| } | |
| static void network_to_register(RDMARegister *reg) | |
| { | |
| reg->current_addr = ntohll(reg->current_addr); | |
| reg->current_index = ntohl(reg->current_index); | |
| reg->chunks = ntohll(reg->chunks); | |
| } | |
| typedef struct QEMU_PACKED { | |
| uint32_t value; /* if zero, we will madvise() */ | |
| uint32_t block_idx; /* which ram block index */ | |
| uint64_t offset; /* Address in remote ram_addr_t space */ | |
| uint64_t length; /* length of the chunk */ | |
| } RDMACompress; | |
| static void compress_to_network(RDMAContext *rdma, RDMACompress *comp) | |
| { | |
| comp->value = htonl(comp->value); | |
| /* | |
| * comp->offset as passed in is an address in the local ram_addr_t | |
| * space, we need to translate this for the destination | |
| */ | |
| comp->offset -= rdma->local_ram_blocks.block[comp->block_idx].offset; | |
| comp->offset += rdma->dest_blocks[comp->block_idx].offset; | |
| comp->block_idx = htonl(comp->block_idx); | |
| comp->offset = htonll(comp->offset); | |
| comp->length = htonll(comp->length); | |
| } | |
| static void network_to_compress(RDMACompress *comp) | |
| { | |
| comp->value = ntohl(comp->value); | |
| comp->block_idx = ntohl(comp->block_idx); | |
| comp->offset = ntohll(comp->offset); | |
| comp->length = ntohll(comp->length); | |
| } | |
| /* | |
| * The result of the dest's memory registration produces an "rkey" | |
| * which the source VM must reference in order to perform | |
| * the RDMA operation. | |
| */ | |
| typedef struct QEMU_PACKED { | |
| uint32_t rkey; | |
| uint32_t padding; | |
| uint64_t host_addr; | |
| } RDMARegisterResult; | |
| static void result_to_network(RDMARegisterResult *result) | |
| { | |
| result->rkey = htonl(result->rkey); | |
| result->host_addr = htonll(result->host_addr); | |
| }; | |
| static void network_to_result(RDMARegisterResult *result) | |
| { | |
| result->rkey = ntohl(result->rkey); | |
| result->host_addr = ntohll(result->host_addr); | |
| }; | |
| static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head, | |
| uint8_t *data, RDMAControlHeader *resp, | |
| int *resp_idx, | |
| int (*callback)(RDMAContext *rdma, | |
| Error **errp), | |
| Error **errp); | |
| static inline uint64_t ram_chunk_index(const uint8_t *start, | |
| const uint8_t *host) | |
| { | |
| return ((uintptr_t) host - (uintptr_t) start) / migrate_rdma_chunk_size(); | |
| } | |
| static inline uint8_t *ram_chunk_start(const RDMALocalBlock *rdma_ram_block, | |
| uint64_t i) | |
| { | |
| return (uint8_t *)(uintptr_t)(rdma_ram_block->local_host_addr + | |
| (i * migrate_rdma_chunk_size())); | |
| } | |
| static inline uint8_t *ram_chunk_end(const RDMALocalBlock *rdma_ram_block, | |
| uint64_t i) | |
| { | |
| uint8_t *result = ram_chunk_start(rdma_ram_block, i) + | |
| migrate_rdma_chunk_size(); | |
| if (result > (rdma_ram_block->local_host_addr + rdma_ram_block->length)) { | |
| result = rdma_ram_block->local_host_addr + rdma_ram_block->length; | |
| } | |
| return result; | |
| } | |
| static void rdma_add_block(RDMAContext *rdma, const char *block_name, | |
| void *host_addr, | |
| ram_addr_t block_offset, uint64_t length) | |
| { | |
| RDMALocalBlocks *local = &rdma->local_ram_blocks; | |
| RDMALocalBlock *block; | |
| RDMALocalBlock *old = local->block; | |
| local->block = g_new0(RDMALocalBlock, local->nb_blocks + 1); | |
| if (local->nb_blocks) { | |
| if (rdma->blockmap) { | |
| for (int x = 0; x < local->nb_blocks; x++) { | |
| g_hash_table_remove(rdma->blockmap, | |
| (void *)(uintptr_t)old[x].offset); | |
| g_hash_table_insert(rdma->blockmap, | |
| (void *)(uintptr_t)old[x].offset, | |
| &local->block[x]); | |
| } | |
| } | |
| memcpy(local->block, old, sizeof(RDMALocalBlock) * local->nb_blocks); | |
| g_free(old); | |
| } | |
| block = &local->block[local->nb_blocks]; | |
| block->block_name = g_strdup(block_name); | |
| block->local_host_addr = host_addr; | |
| block->offset = block_offset; | |
| block->length = length; | |
| block->index = local->nb_blocks; | |
| block->src_index = ~0U; /* Filled in by the receipt of the block list */ | |
| block->nb_chunks = ram_chunk_index(host_addr, host_addr + length) + 1UL; | |
| block->remote_keys = g_new0(uint32_t, block->nb_chunks); | |
| if (rdma->blockmap) { | |
| g_hash_table_insert(rdma->blockmap, (void *)(uintptr_t)block_offset, block); | |
| } | |
| trace_rdma_add_block(block_name, local->nb_blocks, | |
| (uintptr_t) block->local_host_addr, | |
| block->offset, block->length, | |
| (uintptr_t) (block->local_host_addr + block->length), | |
| block->nb_chunks); | |
| local->nb_blocks++; | |
| } | |
| /* | |
| * Memory regions need to be registered with the device and queue pairs setup | |
| * in advanced before the migration starts. This tells us where the RAM blocks | |
| * are so that we can register them individually. | |
| */ | |
| static int qemu_rdma_init_one_block(RAMBlock *rb, void *opaque) | |
| { | |
| const char *block_name = qemu_ram_get_idstr(rb); | |
| void *host_addr = qemu_ram_get_host_addr(rb); | |
| ram_addr_t block_offset = qemu_ram_get_offset(rb); | |
| ram_addr_t length = qemu_ram_get_used_length(rb); | |
| rdma_add_block(opaque, block_name, host_addr, block_offset, length); | |
| return 0; | |
| } | |
| /* | |
| * Identify the RAMBlocks and their quantity. They will be references to | |
| * identify chunk boundaries inside each RAMBlock and also be referenced | |
| * during dynamic page registration. | |
| */ | |
| static void qemu_rdma_init_ram_blocks(RDMAContext *rdma) | |
| { | |
| RDMALocalBlocks *local = &rdma->local_ram_blocks; | |
| int ret; | |
| assert(rdma->blockmap == NULL); | |
| memset(local, 0, sizeof *local); | |
| ret = foreach_not_ignored_block(qemu_rdma_init_one_block, rdma); | |
| assert(!ret); | |
| trace_rdma_init_ram_blocks(local->nb_blocks); | |
| rdma->dest_blocks = g_new0(RDMADestBlock, | |
| rdma->local_ram_blocks.nb_blocks); | |
| } | |
| /* | |
| * Note: If used outside of cleanup, the caller must ensure that the destination | |
| * block structures are also updated | |
| */ | |
| static void rdma_delete_block(RDMAContext *rdma, RDMALocalBlock *block) | |
| { | |
| RDMALocalBlocks *local = &rdma->local_ram_blocks; | |
| RDMALocalBlock *old = local->block; | |
| if (rdma->blockmap) { | |
| g_hash_table_remove(rdma->blockmap, (void *)(uintptr_t)block->offset); | |
| } | |
| if (block->pmr) { | |
| for (int j = 0; j < block->nb_chunks; j++) { | |
| if (!block->pmr[j]) { | |
| continue; | |
| } | |
| ibv_dereg_mr(block->pmr[j]); | |
| rdma->total_registrations--; | |
| } | |
| g_free(block->pmr); | |
| block->pmr = NULL; | |
| } | |
| if (block->mr) { | |
| ibv_dereg_mr(block->mr); | |
| rdma->total_registrations--; | |
| block->mr = NULL; | |
| } | |
| g_free(block->remote_keys); | |
| block->remote_keys = NULL; | |
| g_free(block->block_name); | |
| block->block_name = NULL; | |
| if (rdma->blockmap) { | |
| for (int x = 0; x < local->nb_blocks; x++) { | |
| g_hash_table_remove(rdma->blockmap, | |
| (void *)(uintptr_t)old[x].offset); | |
| } | |
| } | |
| if (local->nb_blocks > 1) { | |
| local->block = g_new0(RDMALocalBlock, local->nb_blocks - 1); | |
| if (block->index) { | |
| memcpy(local->block, old, sizeof(RDMALocalBlock) * block->index); | |
| } | |
| if (block->index < (local->nb_blocks - 1)) { | |
| memcpy(local->block + block->index, old + (block->index + 1), | |
| sizeof(RDMALocalBlock) * | |
| (local->nb_blocks - (block->index + 1))); | |
| for (int x = block->index; x < local->nb_blocks - 1; x++) { | |
| local->block[x].index--; | |
| } | |
| } | |
| } else { | |
| assert(block == local->block); | |
| local->block = NULL; | |
| } | |
| trace_rdma_delete_block(block, (uintptr_t)block->local_host_addr, | |
| block->offset, block->length, | |
| (uintptr_t)(block->local_host_addr + block->length), | |
| block->nb_chunks); | |
| g_free(old); | |
| local->nb_blocks--; | |
| if (local->nb_blocks && rdma->blockmap) { | |
| for (int x = 0; x < local->nb_blocks; x++) { | |
| g_hash_table_insert(rdma->blockmap, | |
| (void *)(uintptr_t)local->block[x].offset, | |
| &local->block[x]); | |
| } | |
| } | |
| } | |
| /* | |
| * Trace RDMA device open, with device details. | |
| */ | |
| static void qemu_rdma_dump_id(const char *who, struct ibv_context *verbs) | |
| { | |
| struct ibv_port_attr port; | |
| if (ibv_query_port(verbs, 1, &port)) { | |
| trace_rdma_dump_id_failed(who); | |
| return; | |
| } | |
| trace_rdma_dump_id(who, | |
| verbs->device->name, | |
| verbs->device->dev_name, | |
| verbs->device->dev_path, | |
| verbs->device->ibdev_path, | |
| port.link_layer, | |
| port.link_layer == IBV_LINK_LAYER_INFINIBAND ? "Infiniband" | |
| : port.link_layer == IBV_LINK_LAYER_ETHERNET ? "Ethernet" | |
| : "Unknown"); | |
| } | |
| /* | |
| * Trace RDMA gid addressing information. | |
| * Useful for understanding the RDMA device hierarchy in the kernel. | |
| */ | |
| static void qemu_rdma_dump_gid(const char *who, struct rdma_cm_id *id) | |
| { | |
| char sgid[33]; | |
| char dgid[33]; | |
| inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.sgid, sgid, sizeof sgid); | |
| inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.dgid, dgid, sizeof dgid); | |
| trace_rdma_dump_gid(who, sgid, dgid); | |
| } | |
| /* | |
| * Figure out which RDMA device corresponds to the requested IP hostname | |
| * Also create the initial connection manager identifiers for opening | |
| * the connection. | |
| */ | |
| static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp) | |
| { | |
| int ret; | |
| struct rdma_addrinfo *res; | |
| char port_str[16]; | |
| struct rdma_cm_event *cm_event; | |
| char ip[40] = "unknown"; | |
| if (rdma->host == NULL || !strcmp(rdma->host, "")) { | |
| error_setg(errp, "RDMA ERROR: RDMA hostname has not been set"); | |
| return -1; | |
| } | |
| /* create CM channel */ | |
| rdma->channel = rdma_create_event_channel(); | |
| if (!rdma->channel) { | |
| error_setg(errp, "RDMA ERROR: could not create CM channel"); | |
| return -1; | |
| } | |
| /* create CM id */ | |
| ret = rdma_create_id(rdma->channel, &rdma->cm_id, NULL, RDMA_PS_TCP); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: could not create channel id"); | |
| goto err_resolve_create_id; | |
| } | |
| snprintf(port_str, 16, "%d", rdma->port); | |
| port_str[15] = '\0'; | |
| ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res); | |
| if (ret) { | |
| error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s", | |
| rdma->host); | |
| goto err_resolve_get_addr; | |
| } | |
| /* Try all addresses, exit loop on first success of resolving address */ | |
| for (struct rdma_addrinfo *e = res; e != NULL; e = e->ai_next) { | |
| inet_ntop(e->ai_family, | |
| &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip); | |
| trace_rdma_resolve_host_trying(rdma->host, ip); | |
| ret = rdma_resolve_addr(rdma->cm_id, NULL, e->ai_dst_addr, | |
| RDMA_RESOLVE_TIMEOUT_MS); | |
| if (ret >= 0) { | |
| goto route; | |
| } | |
| } | |
| rdma_freeaddrinfo(res); | |
| error_setg(errp, "RDMA ERROR: could not resolve address %s", rdma->host); | |
| goto err_resolve_get_addr; | |
| route: | |
| rdma_freeaddrinfo(res); | |
| qemu_rdma_dump_gid("source_resolve_addr", rdma->cm_id); | |
| ret = rdma_get_cm_event(rdma->channel, &cm_event); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: could not perform event_addr_resolved"); | |
| goto err_resolve_get_addr; | |
| } | |
| if (cm_event->event != RDMA_CM_EVENT_ADDR_RESOLVED) { | |
| error_setg(errp, | |
| "RDMA ERROR: result not equal to event_addr_resolved %s", | |
| rdma_event_str(cm_event->event)); | |
| rdma_ack_cm_event(cm_event); | |
| goto err_resolve_get_addr; | |
| } | |
| rdma_ack_cm_event(cm_event); | |
| /* resolve route */ | |
| ret = rdma_resolve_route(rdma->cm_id, RDMA_RESOLVE_TIMEOUT_MS); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: could not resolve rdma route"); | |
| goto err_resolve_get_addr; | |
| } | |
| ret = rdma_get_cm_event(rdma->channel, &cm_event); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: could not perform event_route_resolved"); | |
| goto err_resolve_get_addr; | |
| } | |
| if (cm_event->event != RDMA_CM_EVENT_ROUTE_RESOLVED) { | |
| error_setg(errp, "RDMA ERROR: " | |
| "result not equal to event_route_resolved: %s", | |
| rdma_event_str(cm_event->event)); | |
| rdma_ack_cm_event(cm_event); | |
| goto err_resolve_get_addr; | |
| } | |
| rdma_ack_cm_event(cm_event); | |
| rdma->verbs = rdma->cm_id->verbs; | |
| qemu_rdma_dump_id("source_resolve_host", rdma->cm_id->verbs); | |
| qemu_rdma_dump_gid("source_resolve_host", rdma->cm_id); | |
| return 0; | |
| err_resolve_get_addr: | |
| rdma_destroy_id(rdma->cm_id); | |
| rdma->cm_id = NULL; | |
| err_resolve_create_id: | |
| rdma_destroy_event_channel(rdma->channel); | |
| rdma->channel = NULL; | |
| return -1; | |
| } | |
| /* | |
| * Create protection domain and completion queues | |
| */ | |
| static int qemu_rdma_alloc_pd_cq(RDMAContext *rdma, Error **errp) | |
| { | |
| /* allocate pd */ | |
| rdma->pd = ibv_alloc_pd(rdma->verbs); | |
| if (!rdma->pd) { | |
| error_setg(errp, "failed to allocate protection domain"); | |
| return -1; | |
| } | |
| /* create receive completion channel */ | |
| rdma->recv_comp_channel = ibv_create_comp_channel(rdma->verbs); | |
| if (!rdma->recv_comp_channel) { | |
| error_setg(errp, "failed to allocate receive completion channel"); | |
| goto err_alloc_pd_cq; | |
| } | |
| /* | |
| * Completion queue can be filled by read work requests. | |
| */ | |
| rdma->recv_cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3), | |
| NULL, rdma->recv_comp_channel, 0); | |
| if (!rdma->recv_cq) { | |
| error_setg(errp, "failed to allocate receive completion queue"); | |
| goto err_alloc_pd_cq; | |
| } | |
| /* create send completion channel */ | |
| rdma->send_comp_channel = ibv_create_comp_channel(rdma->verbs); | |
| if (!rdma->send_comp_channel) { | |
| error_setg(errp, "failed to allocate send completion channel"); | |
| goto err_alloc_pd_cq; | |
| } | |
| rdma->send_cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3), | |
| NULL, rdma->send_comp_channel, 0); | |
| if (!rdma->send_cq) { | |
| error_setg(errp, "failed to allocate send completion queue"); | |
| goto err_alloc_pd_cq; | |
| } | |
| return 0; | |
| err_alloc_pd_cq: | |
| if (rdma->pd) { | |
| ibv_dealloc_pd(rdma->pd); | |
| } | |
| if (rdma->recv_comp_channel) { | |
| ibv_destroy_comp_channel(rdma->recv_comp_channel); | |
| } | |
| if (rdma->send_comp_channel) { | |
| ibv_destroy_comp_channel(rdma->send_comp_channel); | |
| } | |
| if (rdma->recv_cq) { | |
| ibv_destroy_cq(rdma->recv_cq); | |
| rdma->recv_cq = NULL; | |
| } | |
| rdma->pd = NULL; | |
| rdma->recv_comp_channel = NULL; | |
| rdma->send_comp_channel = NULL; | |
| return -1; | |
| } | |
| /* | |
| * Create queue pairs. | |
| */ | |
| static int qemu_rdma_alloc_qp(RDMAContext *rdma) | |
| { | |
| struct ibv_qp_init_attr attr = { 0 }; | |
| attr.cap.max_send_wr = RDMA_SIGNALED_SEND_MAX; | |
| attr.cap.max_recv_wr = 3; | |
| attr.cap.max_send_sge = 1; | |
| attr.cap.max_recv_sge = 1; | |
| attr.send_cq = rdma->send_cq; | |
| attr.recv_cq = rdma->recv_cq; | |
| attr.qp_type = IBV_QPT_RC; | |
| if (rdma_create_qp(rdma->cm_id, rdma->pd, &attr) < 0) { | |
| return -1; | |
| } | |
| rdma->qp = rdma->cm_id->qp; | |
| return 0; | |
| } | |
| /* Check whether On-Demand Paging is supported by RDAM device */ | |
| static bool rdma_support_odp(struct ibv_context *dev) | |
| { | |
| struct ibv_device_attr_ex attr = {0}; | |
| if (ibv_query_device_ex(dev, NULL, &attr)) { | |
| return false; | |
| } | |
| if (attr.odp_caps.general_caps & IBV_ODP_SUPPORT) { | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * ibv_advise_mr to avoid RNR NAK error as far as possible. | |
| * The responder mr registering with ODP will sent RNR NAK back to | |
| * the requester in the face of the page fault. | |
| */ | |
| static void qemu_rdma_advise_prefetch_mr(struct ibv_pd *pd, uint64_t addr, | |
| uint32_t len, uint32_t lkey, | |
| const char *name, bool wr) | |
| { | |
| #ifdef HAVE_IBV_ADVISE_MR | |
| int ret; | |
| int advice = wr ? IBV_ADVISE_MR_ADVICE_PREFETCH_WRITE : | |
| IBV_ADVISE_MR_ADVICE_PREFETCH; | |
| struct ibv_sge sg_list = {.lkey = lkey, .addr = addr, .length = len}; | |
| ret = ibv_advise_mr(pd, advice, | |
| IBV_ADVISE_MR_FLAG_FLUSH, &sg_list, 1); | |
| /* ignore the error */ | |
| trace_rdma_advise_mr(name, len, addr, strerror(ret)); | |
| #endif | |
| } | |
| static int qemu_rdma_reg_whole_ram_blocks(RDMAContext *rdma, Error **errp) | |
| { | |
| int i; | |
| RDMALocalBlocks *local = &rdma->local_ram_blocks; | |
| for (i = 0; i < local->nb_blocks; i++) { | |
| int access = IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE; | |
| local->block[i].mr = | |
| ibv_reg_mr(rdma->pd, | |
| local->block[i].local_host_addr, | |
| local->block[i].length, access | |
| ); | |
| /* | |
| * ibv_reg_mr() is not documented to set errno. If it does, | |
| * it's somebody else's doc bug. If it doesn't, the use of | |
| * errno below is wrong. | |
| * TODO Find out whether ibv_reg_mr() sets errno. | |
| */ | |
| if (!local->block[i].mr && | |
| errno == ENOTSUP && rdma_support_odp(rdma->verbs)) { | |
| access |= IBV_ACCESS_ON_DEMAND; | |
| /* register ODP mr */ | |
| local->block[i].mr = | |
| ibv_reg_mr(rdma->pd, | |
| local->block[i].local_host_addr, | |
| local->block[i].length, access); | |
| trace_rdma_register_odp_mr(local->block[i].block_name); | |
| if (local->block[i].mr) { | |
| qemu_rdma_advise_prefetch_mr(rdma->pd, | |
| (uintptr_t)local->block[i].local_host_addr, | |
| local->block[i].length, | |
| local->block[i].mr->lkey, | |
| local->block[i].block_name, | |
| true); | |
| } | |
| } | |
| if (!local->block[i].mr) { | |
| error_setg_errno(errp, errno, | |
| "Failed to register local dest ram block!"); | |
| goto err; | |
| } | |
| rdma->total_registrations++; | |
| } | |
| return 0; | |
| err: | |
| for (i--; i >= 0; i--) { | |
| ibv_dereg_mr(local->block[i].mr); | |
| local->block[i].mr = NULL; | |
| rdma->total_registrations--; | |
| } | |
| return -1; | |
| } | |
| /* | |
| * Find the ram block that corresponds to the page requested to be | |
| * transmitted by QEMU. | |
| * | |
| * Once the block is found, also identify which 'chunk' within that | |
| * block that the page belongs to. | |
| */ | |
| static void qemu_rdma_search_ram_block(RDMAContext *rdma, | |
| uintptr_t block_offset, | |
| uint64_t offset, | |
| uint64_t length, | |
| uint64_t *block_index, | |
| uint64_t *chunk_index) | |
| { | |
| uint64_t current_addr = block_offset + offset; | |
| RDMALocalBlock *block = g_hash_table_lookup(rdma->blockmap, | |
| (void *) block_offset); | |
| assert(block); | |
| assert(current_addr >= block->offset); | |
| assert((current_addr + length) <= (block->offset + block->length)); | |
| *block_index = block->index; | |
| *chunk_index = ram_chunk_index(block->local_host_addr, | |
| block->local_host_addr + (current_addr - block->offset)); | |
| } | |
| /* | |
| * Register a chunk with IB. If the chunk was already registered | |
| * previously, then skip. | |
| * | |
| * Also return the keys associated with the registration needed | |
| * to perform the actual RDMA operation. | |
| */ | |
| static int qemu_rdma_register_and_get_keys(RDMAContext *rdma, | |
| RDMALocalBlock *block, uintptr_t host_addr, | |
| uint32_t *lkey, uint32_t *rkey, int chunk, | |
| uint8_t *chunk_start, uint8_t *chunk_end) | |
| { | |
| if (block->mr) { | |
| if (lkey) { | |
| *lkey = block->mr->lkey; | |
| } | |
| if (rkey) { | |
| *rkey = block->mr->rkey; | |
| } | |
| return 0; | |
| } | |
| /* allocate memory to store chunk MRs */ | |
| if (!block->pmr) { | |
| block->pmr = g_new0(struct ibv_mr *, block->nb_chunks); | |
| } | |
| /* | |
| * If 'rkey', then we're the destination, so grant access to the source. | |
| * | |
| * If 'lkey', then we're the source VM, so grant access only to ourselves. | |
| */ | |
| if (!block->pmr[chunk]) { | |
| uint64_t len = chunk_end - chunk_start; | |
| int access = rkey ? IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE : | |
| 0; | |
| trace_rdma_register_and_get_keys(len, chunk_start); | |
| block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, access); | |
| /* | |
| * ibv_reg_mr() is not documented to set errno. If it does, | |
| * it's somebody else's doc bug. If it doesn't, the use of | |
| * errno below is wrong. | |
| * TODO Find out whether ibv_reg_mr() sets errno. | |
| */ | |
| if (!block->pmr[chunk] && | |
| errno == ENOTSUP && rdma_support_odp(rdma->verbs)) { | |
| access |= IBV_ACCESS_ON_DEMAND; | |
| /* register ODP mr */ | |
| block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, access); | |
| trace_rdma_register_odp_mr(block->block_name); | |
| if (block->pmr[chunk]) { | |
| qemu_rdma_advise_prefetch_mr(rdma->pd, (uintptr_t)chunk_start, | |
| len, block->pmr[chunk]->lkey, | |
| block->block_name, rkey); | |
| } | |
| } | |
| } | |
| if (!block->pmr[chunk]) { | |
| return -1; | |
| } | |
| rdma->total_registrations++; | |
| if (lkey) { | |
| *lkey = block->pmr[chunk]->lkey; | |
| } | |
| if (rkey) { | |
| *rkey = block->pmr[chunk]->rkey; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Register (at connection time) the memory used for control | |
| * channel messages. | |
| */ | |
| static int qemu_rdma_reg_control(RDMAContext *rdma, int idx) | |
| { | |
| rdma->wr_data[idx].control_mr = ibv_reg_mr(rdma->pd, | |
| rdma->wr_data[idx].control, RDMA_CONTROL_MAX_BUFFER, | |
| IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE); | |
| if (rdma->wr_data[idx].control_mr) { | |
| rdma->total_registrations++; | |
| return 0; | |
| } | |
| return -1; | |
| } | |
| static uint64_t qemu_rdma_make_wrid(uint64_t wr_id, uint64_t index, | |
| uint64_t chunk) | |
| { | |
| uint64_t result = wr_id & RDMA_WRID_TYPE_MASK; | |
| result |= (index << RDMA_WRID_BLOCK_SHIFT); | |
| result |= (chunk << RDMA_WRID_CHUNK_SHIFT); | |
| return result; | |
| } | |
| /* | |
| * Consult the connection manager to see a work request | |
| * (of any kind) has completed. | |
| * Return the work request ID that completed. | |
| */ | |
| static int qemu_rdma_poll(RDMAContext *rdma, struct ibv_cq *cq, | |
| uint64_t *wr_id_out, uint32_t *byte_len) | |
| { | |
| int ret; | |
| struct ibv_wc wc; | |
| uint64_t wr_id; | |
| ret = ibv_poll_cq(cq, 1, &wc); | |
| if (!ret) { | |
| *wr_id_out = RDMA_WRID_NONE; | |
| return 0; | |
| } | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| wr_id = wc.wr_id & RDMA_WRID_TYPE_MASK; | |
| if (wc.status != IBV_WC_SUCCESS) { | |
| return -1; | |
| } | |
| if (rdma->control_ready_expected && | |
| (wr_id >= RDMA_WRID_RECV_CONTROL)) { | |
| trace_rdma_poll_recv(wr_id - RDMA_WRID_RECV_CONTROL, wr_id, | |
| rdma->nb_sent); | |
| rdma->control_ready_expected = 0; | |
| } | |
| if (wr_id == RDMA_WRID_RDMA_WRITE) { | |
| uint64_t chunk = | |
| (wc.wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT; | |
| uint64_t index = | |
| (wc.wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT; | |
| RDMALocalBlock *block = &(rdma->local_ram_blocks.block[index]); | |
| trace_rdma_poll_write(wr_id, rdma->nb_sent, | |
| index, chunk, block->local_host_addr, | |
| (void *)(uintptr_t)block->remote_host_addr); | |
| if (rdma->nb_sent > 0) { | |
| rdma->nb_sent--; | |
| } | |
| } else { | |
| trace_rdma_poll_other(wr_id, rdma->nb_sent); | |
| } | |
| *wr_id_out = wc.wr_id; | |
| if (byte_len) { | |
| *byte_len = wc.byte_len; | |
| } | |
| return 0; | |
| } | |
| /* Wait for activity on the completion channel. | |
| * Returns 0 on success, none-0 on error. | |
| */ | |
| static int coroutine_mixed_fn | |
| qemu_rdma_wait_comp_channel(RDMAContext *rdma, | |
| struct ibv_comp_channel *comp_channel) | |
| { | |
| struct rdma_cm_event *cm_event; | |
| if (qemu_in_coroutine()) { | |
| yield_until_fd_readable(comp_channel->fd); | |
| } else { | |
| /* This is the source side, we're in a separate thread | |
| * or destination prior to migration_fd_process_incoming() | |
| * after postcopy, the destination also in a separate thread. | |
| * we can't yield; so we have to poll the fd. | |
| * But we need to be able to handle 'cancel' or an error | |
| * without hanging forever. | |
| */ | |
| while (!rdma->errored && !rdma->received_error) { | |
| GPollFD pfds[2]; | |
| pfds[0].fd = comp_channel->fd; | |
| pfds[0].events = G_IO_IN | G_IO_HUP | G_IO_ERR; | |
| pfds[0].revents = 0; | |
| pfds[1].fd = rdma->channel->fd; | |
| pfds[1].events = G_IO_IN | G_IO_HUP | G_IO_ERR; | |
| pfds[1].revents = 0; | |
| /* 0.1s timeout, should be fine for a 'cancel' */ | |
| switch (qemu_poll_ns(pfds, 2, 100 * 1000 * 1000)) { | |
| case 2: | |
| case 1: /* fd active */ | |
| if (pfds[0].revents) { | |
| return 0; | |
| } | |
| if (pfds[1].revents) { | |
| if (rdma_get_cm_event(rdma->channel, &cm_event) < 0) { | |
| return -1; | |
| } | |
| if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED || | |
| cm_event->event == RDMA_CM_EVENT_DEVICE_REMOVAL) { | |
| rdma_ack_cm_event(cm_event); | |
| return -1; | |
| } | |
| rdma_ack_cm_event(cm_event); | |
| } | |
| break; | |
| case 0: /* Timeout, go around again */ | |
| break; | |
| default: /* Error of some type - | |
| * I don't trust errno from qemu_poll_ns | |
| */ | |
| return -1; | |
| } | |
| if (migrate_get_current()->state == MIGRATION_STATUS_CANCELLING) { | |
| /* Bail out and let the cancellation happen */ | |
| return -1; | |
| } | |
| } | |
| } | |
| if (rdma->received_error) { | |
| return -1; | |
| } | |
| return -rdma->errored; | |
| } | |
| static struct ibv_comp_channel *to_channel(RDMAContext *rdma, uint64_t wrid) | |
| { | |
| return wrid < RDMA_WRID_RECV_CONTROL ? rdma->send_comp_channel : | |
| rdma->recv_comp_channel; | |
| } | |
| static struct ibv_cq *to_cq(RDMAContext *rdma, uint64_t wrid) | |
| { | |
| return wrid < RDMA_WRID_RECV_CONTROL ? rdma->send_cq : rdma->recv_cq; | |
| } | |
| /* | |
| * Block until the next work request has completed. | |
| * | |
| * First poll to see if a work request has already completed, | |
| * otherwise block. | |
| * | |
| * If we encounter completed work requests for IDs other than | |
| * the one we're interested in, then that's generally an error. | |
| * | |
| * The only exception is actual RDMA Write completions. These | |
| * completions only need to be recorded, but do not actually | |
| * need further processing. | |
| */ | |
| static int qemu_rdma_block_for_wrid(RDMAContext *rdma, | |
| uint64_t wrid_requested, | |
| uint32_t *byte_len) | |
| { | |
| int num_cq_events = 0, ret; | |
| struct ibv_cq *cq; | |
| void *cq_ctx; | |
| uint64_t wr_id = RDMA_WRID_NONE, wr_id_in; | |
| struct ibv_comp_channel *ch = to_channel(rdma, wrid_requested); | |
| struct ibv_cq *poll_cq = to_cq(rdma, wrid_requested); | |
| if (ibv_req_notify_cq(poll_cq, 0)) { | |
| return -1; | |
| } | |
| /* poll cq first */ | |
| while (wr_id != wrid_requested) { | |
| ret = qemu_rdma_poll(rdma, poll_cq, &wr_id_in, byte_len); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; | |
| if (wr_id == RDMA_WRID_NONE) { | |
| break; | |
| } | |
| if (wr_id != wrid_requested) { | |
| trace_rdma_block_for_wrid_miss(wrid_requested, wr_id); | |
| } | |
| } | |
| if (wr_id == wrid_requested) { | |
| return 0; | |
| } | |
| while (1) { | |
| ret = qemu_rdma_wait_comp_channel(rdma, ch); | |
| if (ret < 0) { | |
| goto err_block_for_wrid; | |
| } | |
| ret = ibv_get_cq_event(ch, &cq, &cq_ctx); | |
| if (ret < 0) { | |
| goto err_block_for_wrid; | |
| } | |
| num_cq_events++; | |
| if (ibv_req_notify_cq(cq, 0)) { | |
| goto err_block_for_wrid; | |
| } | |
| while (wr_id != wrid_requested) { | |
| ret = qemu_rdma_poll(rdma, poll_cq, &wr_id_in, byte_len); | |
| if (ret < 0) { | |
| goto err_block_for_wrid; | |
| } | |
| wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; | |
| if (wr_id == RDMA_WRID_NONE) { | |
| break; | |
| } | |
| if (wr_id != wrid_requested) { | |
| trace_rdma_block_for_wrid_miss(wrid_requested, wr_id); | |
| } | |
| } | |
| if (wr_id == wrid_requested) { | |
| goto success_block_for_wrid; | |
| } | |
| } | |
| success_block_for_wrid: | |
| if (num_cq_events) { | |
| ibv_ack_cq_events(cq, num_cq_events); | |
| } | |
| return 0; | |
| err_block_for_wrid: | |
| if (num_cq_events) { | |
| ibv_ack_cq_events(cq, num_cq_events); | |
| } | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| /* | |
| * Post a send work request, draining an outstanding RDMA write if the send | |
| * queue is full. | |
| */ | |
| static bool qemu_rdma_post_send(RDMAContext *rdma, | |
| struct ibv_send_wr *send_wr, | |
| Error **errp) | |
| { | |
| struct ibv_send_wr *bad_wr; | |
| uint64_t wr_id = send_wr->wr_id & RDMA_WRID_TYPE_MASK; | |
| const char *wr_desc; | |
| int ret; | |
| switch (wr_id) { | |
| case RDMA_WRID_RDMA_WRITE: | |
| wr_desc = "RDMA write"; | |
| break; | |
| case RDMA_WRID_SEND_CONTROL: | |
| wr_desc = "control send"; | |
| break; | |
| default: | |
| g_assert_not_reached(); | |
| } | |
| ret = ibv_post_send(rdma->qp, send_wr, &bad_wr); | |
| if (ret == ENOMEM && rdma->nb_sent) { | |
| trace_rdma_post_send_queue_full(send_wr->wr_id, rdma->nb_sent); | |
| ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL); | |
| if (ret < 0) { | |
| error_setg(errp, "rdma migration: failed to make room for %s", | |
| wr_desc); | |
| return false; | |
| } | |
| ret = ibv_post_send(rdma->qp, send_wr, &bad_wr); | |
| } | |
| if (ret > 0) { | |
| error_setg_errno(errp, ret, "rdma migration: post %s failed", | |
| wr_desc); | |
| return false; | |
| } | |
| return true; | |
| } | |
| /* | |
| * Post a SEND message work request for the control channel | |
| * containing some data and block until the post completes. | |
| */ | |
| static int qemu_rdma_post_send_control(RDMAContext *rdma, uint8_t *buf, | |
| RDMAControlHeader *head, | |
| Error **errp) | |
| { | |
| int ret; | |
| RDMAWorkRequestData *wr = &rdma->wr_data[RDMA_WRID_CONTROL]; | |
| struct ibv_sge sge = { | |
| .addr = (uintptr_t)(wr->control), | |
| .length = head->len + sizeof(RDMAControlHeader), | |
| .lkey = wr->control_mr->lkey, | |
| }; | |
| struct ibv_send_wr send_wr = { | |
| .wr_id = RDMA_WRID_SEND_CONTROL, | |
| .opcode = IBV_WR_SEND, | |
| .send_flags = IBV_SEND_SIGNALED, | |
| .sg_list = &sge, | |
| .num_sge = 1, | |
| }; | |
| trace_rdma_post_send_control(control_desc(head->type)); | |
| /* | |
| * We don't actually need to do a memcpy() in here if we used | |
| * the "sge" properly, but since we're only sending control messages | |
| * (not RAM in a performance-critical path), then its OK for now. | |
| * | |
| * The copy makes the RDMAControlHeader simpler to manipulate | |
| * for the time being. | |
| */ | |
| assert(head->len <= RDMA_CONTROL_MAX_BUFFER - sizeof(*head)); | |
| memcpy(wr->control, head, sizeof(RDMAControlHeader)); | |
| control_to_network((void *) wr->control); | |
| if (buf) { | |
| memcpy(wr->control + sizeof(RDMAControlHeader), buf, head->len); | |
| } | |
| if (!qemu_rdma_post_send(rdma, &send_wr, errp)) { | |
| return -1; | |
| } | |
| ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_SEND_CONTROL, NULL); | |
| if (ret < 0) { | |
| error_setg(errp, "rdma migration: send polling control error"); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Post a RECV work request in anticipation of some future receipt | |
| * of data on the control channel. | |
| */ | |
| static int qemu_rdma_post_recv_control(RDMAContext *rdma, int idx, | |
| Error **errp) | |
| { | |
| struct ibv_recv_wr *bad_wr; | |
| struct ibv_sge sge = { | |
| .addr = (uintptr_t)(rdma->wr_data[idx].control), | |
| .length = RDMA_CONTROL_MAX_BUFFER, | |
| .lkey = rdma->wr_data[idx].control_mr->lkey, | |
| }; | |
| struct ibv_recv_wr recv_wr = { | |
| .wr_id = RDMA_WRID_RECV_CONTROL + idx, | |
| .sg_list = &sge, | |
| .num_sge = 1, | |
| }; | |
| if (ibv_post_recv(rdma->qp, &recv_wr, &bad_wr)) { | |
| error_setg(errp, "error posting control recv"); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Block and wait for a RECV control channel message to arrive. | |
| */ | |
| static int qemu_rdma_exchange_get_response(RDMAContext *rdma, | |
| RDMAControlHeader *head, uint32_t expecting, int idx, | |
| Error **errp) | |
| { | |
| uint32_t byte_len; | |
| int ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RECV_CONTROL + idx, | |
| &byte_len); | |
| if (ret < 0) { | |
| error_setg(errp, "rdma migration: recv polling control error!"); | |
| return -1; | |
| } | |
| network_to_control((void *) rdma->wr_data[idx].control); | |
| memcpy(head, rdma->wr_data[idx].control, sizeof(RDMAControlHeader)); | |
| trace_rdma_exchange_get_response_start(control_desc(expecting)); | |
| if (expecting == RDMA_CONTROL_NONE) { | |
| trace_rdma_exchange_get_response_none(control_desc(head->type), | |
| head->type); | |
| } else if (head->type != expecting || head->type == RDMA_CONTROL_ERROR) { | |
| error_setg(errp, "Was expecting a %s (%d) control message" | |
| ", but got: %s (%d), length: %d", | |
| control_desc(expecting), expecting, | |
| control_desc(head->type), head->type, head->len); | |
| if (head->type == RDMA_CONTROL_ERROR) { | |
| rdma->received_error = true; | |
| } | |
| return -1; | |
| } | |
| if (head->len > RDMA_CONTROL_MAX_BUFFER - sizeof(*head)) { | |
| error_setg(errp, "too long length: %d", head->len); | |
| return -1; | |
| } | |
| if (sizeof(*head) + head->len != byte_len) { | |
| error_setg(errp, "Malformed length: %d byte_len %d", | |
| head->len, byte_len); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * When a RECV work request has completed, the work request's | |
| * buffer is pointed at the header. | |
| * | |
| * This will advance the pointer to the data portion | |
| * of the control message of the work request's buffer that | |
| * was populated after the work request finished. | |
| */ | |
| static void qemu_rdma_move_header(RDMAContext *rdma, int idx, | |
| RDMAControlHeader *head) | |
| { | |
| rdma->wr_data[idx].control_len = head->len; | |
| rdma->wr_data[idx].control_curr = | |
| rdma->wr_data[idx].control + sizeof(RDMAControlHeader); | |
| } | |
| /* | |
| * This is an 'atomic' high-level operation to deliver a single, unified | |
| * control-channel message. | |
| * | |
| * Additionally, if the user is expecting some kind of reply to this message, | |
| * they can request a 'resp' response message be filled in by posting an | |
| * additional work request on behalf of the user and waiting for an additional | |
| * completion. | |
| * | |
| * The extra (optional) response is used during registration to us from having | |
| * to perform an *additional* exchange of message just to provide a response by | |
| * instead piggy-backing on the acknowledgement. | |
| */ | |
| static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head, | |
| uint8_t *data, RDMAControlHeader *resp, | |
| int *resp_idx, | |
| int (*callback)(RDMAContext *rdma, | |
| Error **errp), | |
| Error **errp) | |
| { | |
| int ret; | |
| /* | |
| * Wait until the dest is ready before attempting to deliver the message | |
| * by waiting for a READY message. | |
| */ | |
| if (rdma->control_ready_expected) { | |
| RDMAControlHeader resp_ignored; | |
| ret = qemu_rdma_exchange_get_response(rdma, &resp_ignored, | |
| RDMA_CONTROL_READY, | |
| RDMA_WRID_READY, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| } | |
| /* | |
| * If the user is expecting a response, post a WR in anticipation of it. | |
| */ | |
| if (resp) { | |
| ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_DATA, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| } | |
| /* | |
| * Post a WR to replace the one we just consumed for the READY message. | |
| */ | |
| ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| /* | |
| * Deliver the control message that was requested. | |
| */ | |
| ret = qemu_rdma_post_send_control(rdma, data, head, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| /* | |
| * If we're expecting a response, block and wait for it. | |
| */ | |
| if (resp) { | |
| if (callback) { | |
| trace_rdma_exchange_send_issue_callback(); | |
| ret = callback(rdma, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| } | |
| trace_rdma_exchange_send_waiting(control_desc(resp->type)); | |
| ret = qemu_rdma_exchange_get_response(rdma, resp, | |
| resp->type, RDMA_WRID_DATA, | |
| errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| qemu_rdma_move_header(rdma, RDMA_WRID_DATA, resp); | |
| if (resp_idx) { | |
| *resp_idx = RDMA_WRID_DATA; | |
| } | |
| trace_rdma_exchange_send_received(control_desc(resp->type)); | |
| } | |
| rdma->control_ready_expected = 1; | |
| return 0; | |
| } | |
| /* | |
| * This is an 'atomic' high-level operation to receive a single, unified | |
| * control-channel message. | |
| */ | |
| static int qemu_rdma_exchange_recv(RDMAContext *rdma, RDMAControlHeader *head, | |
| uint32_t expecting, Error **errp) | |
| { | |
| RDMAControlHeader ready = { | |
| .len = 0, | |
| .type = RDMA_CONTROL_READY, | |
| .repeat = 1, | |
| }; | |
| int ret; | |
| /* | |
| * Inform the source that we're ready to receive a message. | |
| */ | |
| ret = qemu_rdma_post_send_control(rdma, NULL, &ready, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| /* | |
| * Block and wait for the message. | |
| */ | |
| ret = qemu_rdma_exchange_get_response(rdma, head, | |
| expecting, RDMA_WRID_READY, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| qemu_rdma_move_header(rdma, RDMA_WRID_READY, head); | |
| /* | |
| * Post a new RECV work request to replace the one we just consumed. | |
| */ | |
| ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Write an actual chunk of memory using RDMA. | |
| * | |
| * If we're using dynamic registration on the dest-side, we have to | |
| * send a registration command first. | |
| */ | |
| static int qemu_rdma_write_one(RDMAContext *rdma, | |
| int current_index, uint64_t current_addr, | |
| uint64_t length, Error **errp) | |
| { | |
| struct ibv_sge sge; | |
| struct ibv_send_wr send_wr = { 0 }; | |
| int reg_result_idx, ret; | |
| uint64_t chunk, chunks; | |
| uint64_t chunk_size = migrate_rdma_chunk_size(); | |
| uint8_t *chunk_start, *chunk_end; | |
| RDMALocalBlock *block = &(rdma->local_ram_blocks.block[current_index]); | |
| RDMARegister reg; | |
| RDMARegisterResult *reg_result; | |
| RDMAControlHeader resp = { .type = RDMA_CONTROL_REGISTER_RESULT }; | |
| RDMAControlHeader head = { .len = sizeof(RDMARegister), | |
| .type = RDMA_CONTROL_REGISTER_REQUEST, | |
| .repeat = 1, | |
| }; | |
| sge.addr = (uintptr_t)(block->local_host_addr + | |
| (current_addr - block->offset)); | |
| sge.length = length; | |
| chunk = ram_chunk_index(block->local_host_addr, | |
| (uint8_t *)(uintptr_t)sge.addr); | |
| chunk_start = ram_chunk_start(block, chunk); | |
| chunks = length / chunk_size; | |
| if (chunks && ((length % chunk_size) == 0)) { | |
| chunks--; | |
| } | |
| trace_rdma_write_one_top(chunks + 1, | |
| (chunks + 1) * chunk_size / 1024 / 1024); | |
| chunk_end = ram_chunk_end(block, chunk + chunks); | |
| if (!rdma->pin_all) { | |
| if (!block->remote_keys[chunk]) { | |
| /* | |
| * This chunk has not yet been registered, so first check to see | |
| * if the entire chunk is zero. If so, tell the other size to | |
| * memset() + madvise() the entire chunk without RDMA. | |
| */ | |
| if (buffer_is_zero((void *)(uintptr_t)sge.addr, length)) { | |
| RDMACompress comp = { | |
| .offset = current_addr, | |
| .value = 0, | |
| .block_idx = current_index, | |
| .length = length, | |
| }; | |
| head.len = sizeof(comp); | |
| head.type = RDMA_CONTROL_COMPRESS; | |
| trace_rdma_write_one_zero(chunk, sge.length, | |
| current_index, current_addr); | |
| compress_to_network(rdma, &comp); | |
| ret = qemu_rdma_exchange_send(rdma, &head, | |
| (uint8_t *) &comp, NULL, NULL, NULL, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| /* | |
| * TODO: Here we are sending something, but we are not | |
| * accounting for anything transferred. The following is wrong: | |
| * | |
| * stat64_add(&mig_stats.rdma_bytes, sge.length); | |
| * | |
| * because we are using some kind of compression. I | |
| * would think that head.len would be the more similar | |
| * thing to a correct value. | |
| */ | |
| qatomic_add(&mig_stats.zero_pages, | |
| sge.length / qemu_target_page_size()); | |
| return 1; | |
| } | |
| /* | |
| * Otherwise, tell other side to register. | |
| */ | |
| reg.current_index = current_index; | |
| reg.current_addr = current_addr; | |
| reg.chunks = chunks; | |
| trace_rdma_write_one_sendreg(chunk, sge.length, current_index, | |
| current_addr); | |
| register_to_network(rdma, ®); | |
| ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) ®, | |
| &resp, ®_result_idx, NULL, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| /* try to overlap this single registration with the one we sent. */ | |
| if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr, | |
| &sge.lkey, NULL, chunk, | |
| chunk_start, chunk_end)) { | |
| error_setg(errp, "cannot get lkey"); | |
| return -1; | |
| } | |
| reg_result = (RDMARegisterResult *) | |
| rdma->wr_data[reg_result_idx].control_curr; | |
| network_to_result(reg_result); | |
| trace_rdma_write_one_recvregres(block->remote_keys[chunk], | |
| reg_result->rkey, chunk); | |
| block->remote_keys[chunk] = reg_result->rkey; | |
| block->remote_host_addr = reg_result->host_addr; | |
| } else { | |
| /* already registered before */ | |
| if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr, | |
| &sge.lkey, NULL, chunk, | |
| chunk_start, chunk_end)) { | |
| error_setg(errp, "cannot get lkey!"); | |
| return -1; | |
| } | |
| } | |
| send_wr.wr.rdma.rkey = block->remote_keys[chunk]; | |
| } else { | |
| send_wr.wr.rdma.rkey = block->remote_rkey; | |
| if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr, | |
| &sge.lkey, NULL, chunk, | |
| chunk_start, chunk_end)) { | |
| error_setg(errp, "cannot get lkey!"); | |
| return -1; | |
| } | |
| } | |
| /* | |
| * Encode the ram block index and chunk within this wrid. | |
| * We will use this information at the time of completion | |
| * to identify the completed write in trace output. | |
| */ | |
| send_wr.wr_id = qemu_rdma_make_wrid(RDMA_WRID_RDMA_WRITE, | |
| current_index, chunk); | |
| send_wr.opcode = IBV_WR_RDMA_WRITE; | |
| send_wr.send_flags = IBV_SEND_SIGNALED; | |
| send_wr.sg_list = &sge; | |
| send_wr.num_sge = 1; | |
| send_wr.wr.rdma.remote_addr = block->remote_host_addr + | |
| (current_addr - block->offset); | |
| trace_rdma_write_one_post(chunk, sge.addr, send_wr.wr.rdma.remote_addr, | |
| sge.length); | |
| if (!qemu_rdma_post_send(rdma, &send_wr, errp)) { | |
| return -1; | |
| } | |
| qatomic_add(&mig_stats.normal_pages, sge.length / qemu_target_page_size()); | |
| /* | |
| * We are adding to transferred the amount of data written, but no | |
| * overhead at all. I will assume that RDMA is magicaly and don't | |
| * need to transfer (at least) the addresses where it wants to | |
| * write the pages. Here it looks like it should be something | |
| * like: | |
| * sizeof(send_wr) + sge.length | |
| * but this being RDMA, who knows. | |
| */ | |
| qatomic_add(&mig_stats.rdma_bytes, sge.length); | |
| ram_transferred_add(sge.length); | |
| rdma->total_writes++; | |
| return 0; | |
| } | |
| /* | |
| * Push out any unwritten RDMA operations. | |
| * | |
| * We support sending out multiple chunks at the same time. | |
| * Not all of them need to get signaled in the completion queue. | |
| */ | |
| static int qemu_rdma_write_flush(RDMAContext *rdma, Error **errp) | |
| { | |
| int ret; | |
| if (!rdma->current_length) { | |
| return 0; | |
| } | |
| ret = qemu_rdma_write_one(rdma, rdma->current_index, rdma->current_addr, | |
| rdma->current_length, errp); | |
| if (ret < 0) { | |
| return -1; | |
| } | |
| if (ret == 0) { | |
| rdma->nb_sent++; | |
| trace_rdma_write_flush(rdma->nb_sent); | |
| } | |
| rdma->current_length = 0; | |
| rdma->current_addr = 0; | |
| return 0; | |
| } | |
| static inline bool qemu_rdma_buffer_mergeable(RDMAContext *rdma, | |
| uint64_t offset, uint64_t len) | |
| { | |
| RDMALocalBlock *block; | |
| uint8_t *host_addr; | |
| uint8_t *chunk_end; | |
| if (rdma->current_index < 0) { | |
| return false; | |
| } | |
| if (rdma->current_chunk < 0) { | |
| return false; | |
| } | |
| block = &(rdma->local_ram_blocks.block[rdma->current_index]); | |
| host_addr = block->local_host_addr + (offset - block->offset); | |
| chunk_end = ram_chunk_end(block, rdma->current_chunk); | |
| if (rdma->current_length == 0) { | |
| return false; | |
| } | |
| /* | |
| * Only merge into chunk sequentially. | |
| */ | |
| if (offset != (rdma->current_addr + rdma->current_length)) { | |
| return false; | |
| } | |
| if (offset < block->offset) { | |
| return false; | |
| } | |
| if ((offset + len) > (block->offset + block->length)) { | |
| return false; | |
| } | |
| if ((host_addr + len) > chunk_end) { | |
| return false; | |
| } | |
| return true; | |
| } | |
| /* | |
| * We're not actually writing here, but doing three things: | |
| * | |
| * 1. Identify the chunk the buffer belongs to. | |
| * 2. If the chunk is full or the buffer doesn't belong to the current | |
| * chunk, then start a new chunk and flush() the old chunk. | |
| * 3. To keep the hardware busy, we also group chunks into batches | |
| * and only require that a batch gets acknowledged in the completion | |
| * queue instead of each individual chunk. | |
| */ | |
| static int qemu_rdma_write(RDMAContext *rdma, | |
| uint64_t block_offset, uint64_t offset, | |
| uint64_t len, Error **errp) | |
| { | |
| uint64_t current_addr = block_offset + offset; | |
| uint64_t index = rdma->current_index; | |
| uint64_t chunk = rdma->current_chunk; | |
| /* If we cannot merge it, we flush the current buffer first. */ | |
| if (!qemu_rdma_buffer_mergeable(rdma, current_addr, len)) { | |
| if (qemu_rdma_write_flush(rdma, errp) < 0) { | |
| return -1; | |
| } | |
| rdma->current_length = 0; | |
| rdma->current_addr = current_addr; | |
| qemu_rdma_search_ram_block(rdma, block_offset, | |
| offset, len, &index, &chunk); | |
| rdma->current_index = index; | |
| rdma->current_chunk = chunk; | |
| } | |
| /* merge it */ | |
| rdma->current_length += len; | |
| /* flush it if buffer is too large */ | |
| if (rdma->current_length >= rdma_merge_max()) { | |
| return qemu_rdma_write_flush(rdma, errp); | |
| } | |
| return 0; | |
| } | |
| static void qemu_rdma_cleanup(RDMAContext *rdma) | |
| { | |
| Error *err = NULL; | |
| if (rdma->cm_id && rdma->connected) { | |
| if ((rdma->errored || | |
| migrate_get_current()->state == MIGRATION_STATUS_CANCELLING) && | |
| !rdma->received_error) { | |
| RDMAControlHeader head = { .len = 0, | |
| .type = RDMA_CONTROL_ERROR, | |
| .repeat = 1, | |
| }; | |
| warn_report("Early error. Sending error."); | |
| if (qemu_rdma_post_send_control(rdma, NULL, &head, &err) < 0) { | |
| warn_report_err(err); | |
| } | |
| } | |
| rdma_disconnect(rdma->cm_id); | |
| trace_rdma_cleanup_disconnect(); | |
| rdma->connected = false; | |
| } | |
| if (rdma->channel) { | |
| qemu_set_fd_handler(rdma->channel->fd, NULL, NULL, NULL); | |
| } | |
| g_free(rdma->dest_blocks); | |
| rdma->dest_blocks = NULL; | |
| for (int i = 0; i < RDMA_WRID_MAX; i++) { | |
| if (rdma->wr_data[i].control_mr) { | |
| rdma->total_registrations--; | |
| ibv_dereg_mr(rdma->wr_data[i].control_mr); | |
| } | |
| rdma->wr_data[i].control_mr = NULL; | |
| } | |
| if (rdma->local_ram_blocks.block) { | |
| while (rdma->local_ram_blocks.nb_blocks) { | |
| rdma_delete_block(rdma, &rdma->local_ram_blocks.block[0]); | |
| } | |
| } | |
| if (rdma->qp) { | |
| rdma_destroy_qp(rdma->cm_id); | |
| rdma->qp = NULL; | |
| } | |
| if (rdma->recv_cq) { | |
| ibv_destroy_cq(rdma->recv_cq); | |
| rdma->recv_cq = NULL; | |
| } | |
| if (rdma->send_cq) { | |
| ibv_destroy_cq(rdma->send_cq); | |
| rdma->send_cq = NULL; | |
| } | |
| if (rdma->recv_comp_channel) { | |
| ibv_destroy_comp_channel(rdma->recv_comp_channel); | |
| rdma->recv_comp_channel = NULL; | |
| } | |
| if (rdma->send_comp_channel) { | |
| ibv_destroy_comp_channel(rdma->send_comp_channel); | |
| rdma->send_comp_channel = NULL; | |
| } | |
| if (rdma->pd) { | |
| ibv_dealloc_pd(rdma->pd); | |
| rdma->pd = NULL; | |
| } | |
| if (rdma->cm_id) { | |
| rdma_destroy_id(rdma->cm_id); | |
| rdma->cm_id = NULL; | |
| } | |
| /* the destination side, listen_id and channel is shared */ | |
| if (rdma->listen_id) { | |
| if (!rdma->is_return_path) { | |
| rdma_destroy_id(rdma->listen_id); | |
| } | |
| rdma->listen_id = NULL; | |
| if (rdma->channel) { | |
| if (!rdma->is_return_path) { | |
| rdma_destroy_event_channel(rdma->channel); | |
| } | |
| rdma->channel = NULL; | |
| } | |
| } | |
| if (rdma->channel) { | |
| rdma_destroy_event_channel(rdma->channel); | |
| rdma->channel = NULL; | |
| } | |
| g_free(rdma->host); | |
| rdma->host = NULL; | |
| } | |
| static int qemu_rdma_source_init(RDMAContext *rdma, bool pin_all, Error **errp) | |
| { | |
| int ret; | |
| /* | |
| * Will be validated against destination's actual capabilities | |
| * after the connect() completes. | |
| */ | |
| rdma->pin_all = pin_all; | |
| ret = qemu_rdma_resolve_host(rdma, errp); | |
| if (ret < 0) { | |
| goto err_rdma_source_init; | |
| } | |
| ret = qemu_rdma_alloc_pd_cq(rdma, errp); | |
| if (ret < 0) { | |
| goto err_rdma_source_init; | |
| } | |
| ret = qemu_rdma_alloc_qp(rdma); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: rdma migration: error allocating qp!"); | |
| goto err_rdma_source_init; | |
| } | |
| qemu_rdma_init_ram_blocks(rdma); | |
| /* Build the hash that maps from offset to RAMBlock */ | |
| rdma->blockmap = g_hash_table_new(g_direct_hash, g_direct_equal); | |
| for (int i = 0; i < rdma->local_ram_blocks.nb_blocks; i++) { | |
| g_hash_table_insert(rdma->blockmap, | |
| (void *)(uintptr_t)rdma->local_ram_blocks.block[i].offset, | |
| &rdma->local_ram_blocks.block[i]); | |
| } | |
| for (int i = 0; i < RDMA_WRID_MAX; i++) { | |
| ret = qemu_rdma_reg_control(rdma, i); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: rdma migration: error " | |
| "registering %d control!", i); | |
| goto err_rdma_source_init; | |
| } | |
| } | |
| return 0; | |
| err_rdma_source_init: | |
| qemu_rdma_cleanup(rdma); | |
| return -1; | |
| } | |
| static int qemu_get_cm_event_timeout(RDMAContext *rdma, | |
| struct rdma_cm_event **cm_event, | |
| long msec, Error **errp) | |
| { | |
| int ret; | |
| struct pollfd poll_fd = { | |
| .fd = rdma->channel->fd, | |
| .events = POLLIN, | |
| .revents = 0 | |
| }; | |
| do { | |
| ret = poll(&poll_fd, 1, msec); | |
| } while (ret < 0 && errno == EINTR); | |
| if (ret == 0) { | |
| error_setg(errp, "RDMA ERROR: poll cm event timeout"); | |
| return -1; | |
| } else if (ret < 0) { | |
| error_setg_errno(errp, errno, "RDMA ERROR: failed to poll cm event"); | |
| return -1; | |
| } else if (poll_fd.revents & POLLIN) { | |
| if (rdma_get_cm_event(rdma->channel, cm_event) < 0) { | |
| error_setg(errp, "RDMA ERROR: failed to get cm event"); | |
| return -1; | |
| } | |
| return 0; | |
| } else { | |
| error_setg(errp, "RDMA ERROR: no POLLIN event, revent=%x", | |
| poll_fd.revents); | |
| return -1; | |
| } | |
| } | |
| static int qemu_rdma_connect(RDMAContext *rdma, bool return_path, | |
| Error **errp) | |
| { | |
| RDMACapabilities cap = { | |
| .version = RDMA_CONTROL_VERSION_CURRENT, | |
| .flags = 0, | |
| }; | |
| struct rdma_conn_param conn_param = { .initiator_depth = 2, | |
| .retry_count = 5, | |
| .private_data = &cap, | |
| .private_data_len = sizeof(cap), | |
| }; | |
| struct rdma_cm_event *cm_event; | |
| int ret; | |
| /* | |
| * Only negotiate the capability with destination if the user | |
| * on the source first requested the capability. | |
| */ | |
| if (rdma->pin_all) { | |
| trace_rdma_connect_pin_all_requested(); | |
| cap.flags |= RDMA_CAPABILITY_PIN_ALL; | |
| } | |
| caps_to_network(&cap); | |
| ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp); | |
| if (ret < 0) { | |
| goto err_rdma_source_connect; | |
| } | |
| ret = rdma_connect(rdma->cm_id, &conn_param); | |
| if (ret < 0) { | |
| error_setg_errno(errp, errno, | |
| "RDMA ERROR: connecting to destination!"); | |
| goto err_rdma_source_connect; | |
| } | |
| if (return_path) { | |
| ret = qemu_get_cm_event_timeout(rdma, &cm_event, 5000, errp); | |
| } else { | |
| ret = rdma_get_cm_event(rdma->channel, &cm_event); | |
| if (ret < 0) { | |
| error_setg_errno(errp, errno, | |
| "RDMA ERROR: failed to get cm event"); | |
| } | |
| } | |
| if (ret < 0) { | |
| goto err_rdma_source_connect; | |
| } | |
| if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) { | |
| error_setg(errp, "RDMA ERROR: connecting to destination!"); | |
| rdma_ack_cm_event(cm_event); | |
| goto err_rdma_source_connect; | |
| } | |
| rdma->connected = true; | |
| memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap)); | |
| network_to_caps(&cap); | |
| /* | |
| * Verify that the *requested* capabilities are supported by the destination | |
| * and disable them otherwise. | |
| */ | |
| if (rdma->pin_all && !(cap.flags & RDMA_CAPABILITY_PIN_ALL)) { | |
| warn_report("RDMA: Server cannot support pinning all memory. " | |
| "Will register memory dynamically."); | |
| rdma->pin_all = false; | |
| } | |
| trace_rdma_connect_pin_all_outcome(rdma->pin_all); | |
| rdma_ack_cm_event(cm_event); | |
| rdma->control_ready_expected = 1; | |
| rdma->nb_sent = 0; | |
| return 0; | |
| err_rdma_source_connect: | |
| qemu_rdma_cleanup(rdma); | |
| return -1; | |
| } | |
| static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp) | |
| { | |
| int ret; | |
| struct rdma_cm_id *listen_id; | |
| char ip[40] = "unknown"; | |
| struct rdma_addrinfo *res, *e; | |
| char port_str[16]; | |
| int reuse = 1; | |
| for (int i = 0; i < RDMA_WRID_MAX; i++) { | |
| rdma->wr_data[i].control_len = 0; | |
| rdma->wr_data[i].control_curr = NULL; | |
| } | |
| if (!rdma->host || !rdma->host[0]) { | |
| error_setg(errp, "RDMA ERROR: RDMA host is not set!"); | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| /* create CM channel */ | |
| rdma->channel = rdma_create_event_channel(); | |
| if (!rdma->channel) { | |
| error_setg(errp, "RDMA ERROR: could not create rdma event channel"); | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| /* create CM id */ | |
| ret = rdma_create_id(rdma->channel, &listen_id, NULL, RDMA_PS_TCP); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: could not create cm_id!"); | |
| goto err_dest_init_create_listen_id; | |
| } | |
| snprintf(port_str, 16, "%d", rdma->port); | |
| port_str[15] = '\0'; | |
| ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res); | |
| if (ret) { | |
| error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s", | |
| rdma->host); | |
| goto err_dest_init_bind_addr; | |
| } | |
| ret = rdma_set_option(listen_id, RDMA_OPTION_ID, RDMA_OPTION_ID_REUSEADDR, | |
| &reuse, sizeof reuse); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: Error: could not set REUSEADDR option"); | |
| goto err_dest_init_bind_addr; | |
| } | |
| /* Try all addresses */ | |
| for (e = res; e != NULL; e = e->ai_next) { | |
| inet_ntop(e->ai_family, | |
| &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip); | |
| trace_rdma_dest_init_trying(rdma->host, ip); | |
| ret = rdma_bind_addr(listen_id, e->ai_dst_addr); | |
| if (ret < 0) { | |
| continue; | |
| } | |
| break; | |
| } | |
| rdma_freeaddrinfo(res); | |
| if (!e) { | |
| error_setg(errp, "RDMA ERROR: Error: could not rdma_bind_addr!"); | |
| goto err_dest_init_bind_addr; | |
| } | |
| rdma->listen_id = listen_id; | |
| qemu_rdma_dump_gid("dest_init", listen_id); | |
| return 0; | |
| err_dest_init_bind_addr: | |
| rdma_destroy_id(listen_id); | |
| err_dest_init_create_listen_id: | |
| rdma_destroy_event_channel(rdma->channel); | |
| rdma->channel = NULL; | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| static void qemu_rdma_return_path_dest_init(RDMAContext *rdma_return_path, | |
| RDMAContext *rdma) | |
| { | |
| for (int i = 0; i < RDMA_WRID_MAX; i++) { | |
| rdma_return_path->wr_data[i].control_len = 0; | |
| rdma_return_path->wr_data[i].control_curr = NULL; | |
| } | |
| /*the CM channel and CM id is shared*/ | |
| rdma_return_path->channel = rdma->channel; | |
| rdma_return_path->listen_id = rdma->listen_id; | |
| rdma->return_path = rdma_return_path; | |
| rdma_return_path->return_path = rdma; | |
| rdma_return_path->is_return_path = true; | |
| } | |
| static RDMAContext *qemu_rdma_data_init(InetSocketAddress *saddr, Error **errp) | |
| { | |
| RDMAContext *rdma = NULL; | |
| rdma = g_new0(RDMAContext, 1); | |
| rdma->current_index = -1; | |
| rdma->current_chunk = -1; | |
| rdma->host = g_strdup(saddr->host); | |
| rdma->port = atoi(saddr->port); | |
| return rdma; | |
| } | |
| /* | |
| * QEMUFile interface to the control channel. | |
| * SEND messages for control only. | |
| * VM's ram is handled with regular RDMA messages. | |
| */ | |
| static ssize_t qio_channel_rdma_writev(QIOChannel *ioc, | |
| const struct iovec *iov, | |
| size_t niov, | |
| int *fds, | |
| size_t nfds, | |
| int flags, | |
| Error **errp) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | |
| RDMAContext *rdma; | |
| int ret; | |
| ssize_t done = 0; | |
| size_t len; | |
| RCU_READ_LOCK_GUARD(); | |
| rdma = qatomic_rcu_read(&rioc->rdmaout); | |
| if (!rdma) { | |
| error_setg(errp, "RDMA control channel output is not set"); | |
| return -1; | |
| } | |
| if (rdma->errored) { | |
| error_setg(errp, | |
| "RDMA is in an error state waiting migration to abort!"); | |
| return -1; | |
| } | |
| /* | |
| * Push out any writes that | |
| * we're queued up for VM's ram. | |
| */ | |
| ret = qemu_rdma_write_flush(rdma, errp); | |
| if (ret < 0) { | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| for (int i = 0; i < niov; i++) { | |
| size_t remaining = iov[i].iov_len; | |
| uint8_t * data = (void *)iov[i].iov_base; | |
| while (remaining) { | |
| RDMAControlHeader head = {}; | |
| len = MIN(remaining, RDMA_SEND_INCREMENT); | |
| remaining -= len; | |
| head.len = len; | |
| head.type = RDMA_CONTROL_QEMU_FILE; | |
| ret = qemu_rdma_exchange_send(rdma, &head, | |
| data, NULL, NULL, NULL, errp); | |
| if (ret < 0) { | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| data += len; | |
| done += len; | |
| } | |
| } | |
| return done; | |
| } | |
| static size_t qemu_rdma_fill(RDMAContext *rdma, uint8_t *buf, | |
| size_t size, int idx) | |
| { | |
| size_t len = 0; | |
| if (rdma->wr_data[idx].control_len) { | |
| trace_rdma_fill(rdma->wr_data[idx].control_len, size); | |
| len = MIN(size, rdma->wr_data[idx].control_len); | |
| memcpy(buf, rdma->wr_data[idx].control_curr, len); | |
| rdma->wr_data[idx].control_curr += len; | |
| rdma->wr_data[idx].control_len -= len; | |
| } | |
| return len; | |
| } | |
| /* | |
| * QEMUFile interface to the control channel. | |
| * RDMA links don't use bytestreams, so we have to | |
| * return bytes to QEMUFile opportunistically. | |
| */ | |
| static ssize_t qio_channel_rdma_readv(QIOChannel *ioc, | |
| const struct iovec *iov, | |
| size_t niov, | |
| int **fds, | |
| size_t *nfds, | |
| int flags, | |
| Error **errp) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | |
| RDMAContext *rdma; | |
| RDMAControlHeader head; | |
| int ret; | |
| ssize_t done = 0; | |
| size_t len; | |
| RCU_READ_LOCK_GUARD(); | |
| rdma = qatomic_rcu_read(&rioc->rdmain); | |
| if (!rdma) { | |
| error_setg(errp, "RDMA control channel input is not set"); | |
| return -1; | |
| } | |
| if (rdma->errored) { | |
| error_setg(errp, | |
| "RDMA is in an error state waiting migration to abort!"); | |
| return -1; | |
| } | |
| for (int i = 0; i < niov; i++) { | |
| size_t want = iov[i].iov_len; | |
| uint8_t *data = (void *)iov[i].iov_base; | |
| /* | |
| * First, we hold on to the last SEND message we | |
| * were given and dish out the bytes until we run | |
| * out of bytes. | |
| */ | |
| len = qemu_rdma_fill(rdma, data, want, 0); | |
| done += len; | |
| want -= len; | |
| /* Got what we needed, so go to next iovec */ | |
| if (want == 0) { | |
| continue; | |
| } | |
| /* If we got any data so far, then don't wait | |
| * for more, just return what we have */ | |
| if (done > 0) { | |
| break; | |
| } | |
| /* We've got nothing at all, so lets wait for | |
| * more to arrive | |
| */ | |
| ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_QEMU_FILE, | |
| errp); | |
| if (ret < 0) { | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| /* | |
| * SEND was received with new bytes, now try again. | |
| */ | |
| len = qemu_rdma_fill(rdma, data, want, 0); | |
| done += len; | |
| want -= len; | |
| /* Still didn't get enough, so lets just return */ | |
| if (want) { | |
| if (done == 0) { | |
| return QIO_CHANNEL_ERR_BLOCK; | |
| } else { | |
| break; | |
| } | |
| } | |
| } | |
| return done; | |
| } | |
| /* Block until all outstanding writes have been delivered by the hardware. */ | |
| static int qemu_rdma_drain_cq(RDMAContext *rdma, Error **errp) | |
| { | |
| if (qemu_rdma_write_flush(rdma, errp) < 0) { | |
| return -1; | |
| } | |
| while (rdma->nb_sent) { | |
| if (qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL) < 0) { | |
| error_setg(errp, "rdma migration: completion polling error"); | |
| return -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int rdma_ram_round_notify(NotifierWithReturn *n G_GNUC_UNUSED, | |
| void *data, Error **errp) | |
| { | |
| RAMRoundNotifyData *round_data = data; | |
| QEMUFile *f; | |
| QIOChannelRDMA *rioc; | |
| RDMAContext *rdma; | |
| if (!migrate_rdma()) { | |
| return 0; | |
| } | |
| f = round_data->file; | |
| RCU_READ_LOCK_GUARD(); | |
| rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | |
| rdma = qatomic_rcu_read(&rioc->rdmaout); | |
| if (!rdma) { | |
| error_setg(errp, "RDMA output context is not set"); | |
| return -1; | |
| } | |
| if (rdma_errored(rdma)) { | |
| error_setg(errp, "RDMA is in an error state"); | |
| return -1; | |
| } | |
| return qemu_rdma_drain_cq(rdma, errp); | |
| } | |
| static NotifierWithReturn rdma_ram_round_notifier = { | |
| .notify = rdma_ram_round_notify, | |
| }; | |
| static int qio_channel_rdma_set_blocking(QIOChannel *ioc, | |
| bool blocking, | |
| Error **errp) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | |
| /* XXX we should make readv/writev actually honour this :-) */ | |
| rioc->blocking = blocking; | |
| return 0; | |
| } | |
| typedef struct QIOChannelRDMASource QIOChannelRDMASource; | |
| struct QIOChannelRDMASource { | |
| GSource parent; | |
| QIOChannelRDMA *rioc; | |
| GIOCondition condition; | |
| }; | |
| static gboolean | |
| qio_channel_rdma_source_prepare(GSource *source, | |
| gint *timeout) | |
| { | |
| QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source; | |
| RDMAContext *rdma; | |
| GIOCondition cond = 0; | |
| *timeout = -1; | |
| RCU_READ_LOCK_GUARD(); | |
| if (rsource->condition == G_IO_IN) { | |
| rdma = qatomic_rcu_read(&rsource->rioc->rdmain); | |
| } else { | |
| rdma = qatomic_rcu_read(&rsource->rioc->rdmaout); | |
| } | |
| if (!rdma) { | |
| error_report("RDMAContext is NULL when prepare Gsource"); | |
| return FALSE; | |
| } | |
| if (rdma->wr_data[0].control_len) { | |
| cond |= G_IO_IN; | |
| } | |
| cond |= G_IO_OUT; | |
| return cond & rsource->condition; | |
| } | |
| static gboolean | |
| qio_channel_rdma_source_check(GSource *source) | |
| { | |
| QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source; | |
| RDMAContext *rdma; | |
| GIOCondition cond = 0; | |
| RCU_READ_LOCK_GUARD(); | |
| if (rsource->condition == G_IO_IN) { | |
| rdma = qatomic_rcu_read(&rsource->rioc->rdmain); | |
| } else { | |
| rdma = qatomic_rcu_read(&rsource->rioc->rdmaout); | |
| } | |
| if (!rdma) { | |
| error_report("RDMAContext is NULL when check Gsource"); | |
| return FALSE; | |
| } | |
| if (rdma->wr_data[0].control_len) { | |
| cond |= G_IO_IN; | |
| } | |
| cond |= G_IO_OUT; | |
| return cond & rsource->condition; | |
| } | |
| static gboolean | |
| qio_channel_rdma_source_dispatch(GSource *source, | |
| GSourceFunc callback, | |
| gpointer user_data) | |
| { | |
| QIOChannelFunc func = (QIOChannelFunc)callback; | |
| QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source; | |
| RDMAContext *rdma; | |
| GIOCondition cond = 0; | |
| RCU_READ_LOCK_GUARD(); | |
| if (rsource->condition == G_IO_IN) { | |
| rdma = qatomic_rcu_read(&rsource->rioc->rdmain); | |
| } else { | |
| rdma = qatomic_rcu_read(&rsource->rioc->rdmaout); | |
| } | |
| if (!rdma) { | |
| error_report("RDMAContext is NULL when dispatch Gsource"); | |
| return FALSE; | |
| } | |
| if (rdma->wr_data[0].control_len) { | |
| cond |= G_IO_IN; | |
| } | |
| cond |= G_IO_OUT; | |
| return (*func)(QIO_CHANNEL(rsource->rioc), | |
| (cond & rsource->condition), | |
| user_data); | |
| } | |
| static void | |
| qio_channel_rdma_source_finalize(GSource *source) | |
| { | |
| QIOChannelRDMASource *ssource = (QIOChannelRDMASource *)source; | |
| object_unref(OBJECT(ssource->rioc)); | |
| } | |
| static GSourceFuncs qio_channel_rdma_source_funcs = { | |
| qio_channel_rdma_source_prepare, | |
| qio_channel_rdma_source_check, | |
| qio_channel_rdma_source_dispatch, | |
| qio_channel_rdma_source_finalize | |
| }; | |
| static GSource *qio_channel_rdma_create_watch(QIOChannel *ioc, | |
| GIOCondition condition) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | |
| QIOChannelRDMASource *ssource; | |
| GSource *source; | |
| source = g_source_new(&qio_channel_rdma_source_funcs, | |
| sizeof(QIOChannelRDMASource)); | |
| ssource = (QIOChannelRDMASource *)source; | |
| ssource->rioc = rioc; | |
| object_ref(OBJECT(rioc)); | |
| ssource->condition = condition; | |
| return source; | |
| } | |
| static void qio_channel_rdma_set_aio_fd_handler(QIOChannel *ioc, | |
| AioContext *read_ctx, | |
| IOHandler *io_read, | |
| AioContext *write_ctx, | |
| IOHandler *io_write, | |
| void *opaque) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | |
| if (io_read) { | |
| aio_set_fd_handler(read_ctx, rioc->rdmain->recv_comp_channel->fd, | |
| io_read, io_write, NULL, NULL, opaque); | |
| aio_set_fd_handler(read_ctx, rioc->rdmain->send_comp_channel->fd, | |
| io_read, io_write, NULL, NULL, opaque); | |
| } else { | |
| aio_set_fd_handler(write_ctx, rioc->rdmaout->recv_comp_channel->fd, | |
| io_read, io_write, NULL, NULL, opaque); | |
| aio_set_fd_handler(write_ctx, rioc->rdmaout->send_comp_channel->fd, | |
| io_read, io_write, NULL, NULL, opaque); | |
| } | |
| } | |
| struct rdma_close_rcu { | |
| struct rcu_head rcu; | |
| RDMAContext *rdmain; | |
| RDMAContext *rdmaout; | |
| }; | |
| /* callback from qio_channel_rdma_close via call_rcu */ | |
| static void qio_channel_rdma_close_rcu(struct rdma_close_rcu *rcu) | |
| { | |
| if (rcu->rdmain) { | |
| qemu_rdma_cleanup(rcu->rdmain); | |
| } | |
| if (rcu->rdmaout) { | |
| qemu_rdma_cleanup(rcu->rdmaout); | |
| } | |
| g_free(rcu->rdmain); | |
| g_free(rcu->rdmaout); | |
| g_free(rcu); | |
| } | |
| static int qio_channel_rdma_close(QIOChannel *ioc, | |
| Error **errp) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | |
| RDMAContext *rdmain, *rdmaout; | |
| struct rdma_close_rcu *rcu = g_new(struct rdma_close_rcu, 1); | |
| trace_rdma_close(); | |
| rdmain = rioc->rdmain; | |
| if (rdmain) { | |
| qatomic_rcu_set(&rioc->rdmain, NULL); | |
| } | |
| rdmaout = rioc->rdmaout; | |
| if (rdmaout) { | |
| qatomic_rcu_set(&rioc->rdmaout, NULL); | |
| } | |
| rcu->rdmain = rdmain; | |
| rcu->rdmaout = rdmaout; | |
| call_rcu(rcu, qio_channel_rdma_close_rcu, rcu); | |
| return 0; | |
| } | |
| static int | |
| qio_channel_rdma_shutdown(QIOChannel *ioc, | |
| QIOChannelShutdown how, | |
| Error **errp) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | |
| RDMAContext *rdmain, *rdmaout; | |
| RCU_READ_LOCK_GUARD(); | |
| rdmain = qatomic_rcu_read(&rioc->rdmain); | |
| rdmaout = qatomic_rcu_read(&rioc->rdmaout); | |
| switch (how) { | |
| case QIO_CHANNEL_SHUTDOWN_READ: | |
| if (rdmain) { | |
| rdmain->errored = true; | |
| } | |
| break; | |
| case QIO_CHANNEL_SHUTDOWN_WRITE: | |
| if (rdmaout) { | |
| rdmaout->errored = true; | |
| } | |
| break; | |
| case QIO_CHANNEL_SHUTDOWN_BOTH: | |
| default: | |
| if (rdmain) { | |
| rdmain->errored = true; | |
| } | |
| if (rdmaout) { | |
| rdmaout->errored = true; | |
| } | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Parameters: | |
| * @offset == 0 : | |
| * This means that 'block_offset' is a full virtual address that does not | |
| * belong to a RAMBlock of the virtual machine and instead | |
| * represents a private malloc'd memory area that the caller wishes to | |
| * transfer. | |
| * | |
| * @offset != 0 : | |
| * Offset is an offset to be added to block_offset and used | |
| * to also lookup the corresponding RAMBlock. | |
| * | |
| * @size : Number of bytes to transfer | |
| * | |
| * @pages_sent : User-specificed pointer to indicate how many pages were | |
| * sent. Usually, this will not be more than a few bytes of | |
| * the protocol because most transfers are sent asynchronously. | |
| */ | |
| static int qemu_rdma_save_page(QEMUFile *f, ram_addr_t block_offset, | |
| ram_addr_t offset, size_t size) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | |
| Error *err = NULL; | |
| RDMAContext *rdma; | |
| int ret; | |
| RCU_READ_LOCK_GUARD(); | |
| rdma = qatomic_rcu_read(&rioc->rdmaout); | |
| if (!rdma) { | |
| return -1; | |
| } | |
| if (rdma_errored(rdma)) { | |
| return -1; | |
| } | |
| qemu_fflush(f); | |
| /* | |
| * Add this page to the current 'chunk'. If the chunk | |
| * is full, or the page doesn't belong to the current chunk, | |
| * an actual RDMA write will occur and a new chunk will be formed. | |
| */ | |
| ret = qemu_rdma_write(rdma, block_offset, offset, size, &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| goto err; | |
| } | |
| /* | |
| * Drain the Completion Queue if possible, but do not block, | |
| * just poll. | |
| * | |
| * If nothing to poll, the end of the iteration will do this | |
| * again to make sure we don't overflow the request queue. | |
| */ | |
| while (1) { | |
| uint64_t wr_id, wr_id_in; | |
| ret = qemu_rdma_poll(rdma, rdma->recv_cq, &wr_id_in, NULL); | |
| if (ret < 0) { | |
| error_report("rdma migration: polling error"); | |
| goto err; | |
| } | |
| wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; | |
| if (wr_id == RDMA_WRID_NONE) { | |
| break; | |
| } | |
| } | |
| while (1) { | |
| uint64_t wr_id, wr_id_in; | |
| ret = qemu_rdma_poll(rdma, rdma->send_cq, &wr_id_in, NULL); | |
| if (ret < 0) { | |
| error_report("rdma migration: polling error"); | |
| goto err; | |
| } | |
| wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; | |
| if (wr_id == RDMA_WRID_NONE) { | |
| break; | |
| } | |
| } | |
| return RAM_SAVE_CONTROL_DELAYED; | |
| err: | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| int rdma_control_save_page(QEMUFile *f, ram_addr_t block_offset, | |
| ram_addr_t offset, size_t size) | |
| { | |
| assert(migrate_rdma()); | |
| int ret = qemu_rdma_save_page(f, block_offset, offset, size); | |
| if (ret != RAM_SAVE_CONTROL_DELAYED) { | |
| if (ret < 0) { | |
| qemu_file_set_error(f, ret); | |
| } | |
| } | |
| return ret; | |
| } | |
| static void rdma_accept_incoming_migration(void *opaque); | |
| static void rdma_cm_poll_handler(void *opaque) | |
| { | |
| RDMAContext *rdma = opaque; | |
| struct rdma_cm_event *cm_event; | |
| MigrationIncomingState *mis = migration_incoming_get_current(); | |
| if (rdma_get_cm_event(rdma->channel, &cm_event) < 0) { | |
| error_report("get_cm_event failed %d", errno); | |
| return; | |
| } | |
| if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED || | |
| cm_event->event == RDMA_CM_EVENT_DEVICE_REMOVAL) { | |
| if (!rdma->errored && | |
| migration_incoming_get_current()->state != | |
| MIGRATION_STATUS_COMPLETED) { | |
| error_report("receive cm event, cm event is %d", cm_event->event); | |
| rdma->errored = true; | |
| if (rdma->return_path) { | |
| rdma->return_path->errored = true; | |
| } | |
| } | |
| rdma_ack_cm_event(cm_event); | |
| if (mis->loadvm_co) { | |
| qemu_coroutine_enter(mis->loadvm_co); | |
| } | |
| return; | |
| } | |
| rdma_ack_cm_event(cm_event); | |
| } | |
| static int qemu_rdma_accept(RDMAContext *rdma) | |
| { | |
| Error *err = NULL; | |
| RDMACapabilities cap; | |
| struct rdma_conn_param conn_param = { | |
| .responder_resources = 2, | |
| .private_data = &cap, | |
| .private_data_len = sizeof(cap), | |
| }; | |
| RDMAContext *rdma_return_path = NULL; | |
| g_autoptr(InetSocketAddress) isock = g_new0(InetSocketAddress, 1); | |
| struct rdma_cm_event *cm_event; | |
| struct ibv_context *verbs; | |
| int ret; | |
| ret = rdma_get_cm_event(rdma->channel, &cm_event); | |
| if (ret < 0) { | |
| goto err_rdma_dest_wait; | |
| } | |
| if (cm_event->event != RDMA_CM_EVENT_CONNECT_REQUEST) { | |
| rdma_ack_cm_event(cm_event); | |
| goto err_rdma_dest_wait; | |
| } | |
| isock->host = g_strdup(rdma->host); | |
| isock->port = g_strdup_printf("%d", rdma->port); | |
| /* | |
| * initialize the RDMAContext for return path for postcopy after first | |
| * connection request reached. | |
| */ | |
| if ((migrate_postcopy() || migrate_return_path()) | |
| && !rdma->is_return_path) { | |
| rdma_return_path = qemu_rdma_data_init(isock, NULL); | |
| if (rdma_return_path == NULL) { | |
| rdma_ack_cm_event(cm_event); | |
| goto err_rdma_dest_wait; | |
| } | |
| qemu_rdma_return_path_dest_init(rdma_return_path, rdma); | |
| } | |
| memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap)); | |
| network_to_caps(&cap); | |
| if (cap.version < 1 || cap.version > RDMA_CONTROL_VERSION_CURRENT) { | |
| error_report("Unknown source RDMA version: %d, bailing...", | |
| cap.version); | |
| rdma_ack_cm_event(cm_event); | |
| goto err_rdma_dest_wait; | |
| } | |
| /* | |
| * Respond with only the capabilities this version of QEMU knows about. | |
| */ | |
| cap.flags &= known_capabilities; | |
| /* | |
| * Enable the ones that we do know about. | |
| * Add other checks here as new ones are introduced. | |
| */ | |
| if (cap.flags & RDMA_CAPABILITY_PIN_ALL) { | |
| rdma->pin_all = true; | |
| } | |
| rdma->cm_id = cm_event->id; | |
| verbs = cm_event->id->verbs; | |
| rdma_ack_cm_event(cm_event); | |
| trace_rdma_accept_pin_state(rdma->pin_all); | |
| caps_to_network(&cap); | |
| trace_rdma_accept_pin_verbsc(verbs); | |
| if (!rdma->verbs) { | |
| rdma->verbs = verbs; | |
| } else if (rdma->verbs != verbs) { | |
| error_report("ibv context not matching %p, %p!", rdma->verbs, | |
| verbs); | |
| goto err_rdma_dest_wait; | |
| } | |
| qemu_rdma_dump_id("dest_init", verbs); | |
| ret = qemu_rdma_alloc_pd_cq(rdma, &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| goto err_rdma_dest_wait; | |
| } | |
| ret = qemu_rdma_alloc_qp(rdma); | |
| if (ret < 0) { | |
| error_report("rdma migration: error allocating qp!"); | |
| goto err_rdma_dest_wait; | |
| } | |
| qemu_rdma_init_ram_blocks(rdma); | |
| for (int i = 0; i < RDMA_WRID_MAX; i++) { | |
| ret = qemu_rdma_reg_control(rdma, i); | |
| if (ret < 0) { | |
| error_report("rdma: error registering %d control", i); | |
| goto err_rdma_dest_wait; | |
| } | |
| } | |
| ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| goto err_rdma_dest_wait; | |
| } | |
| /* Accept the second connection request for return path */ | |
| if ((migrate_postcopy() || migrate_return_path()) | |
| && !rdma->is_return_path) { | |
| qemu_set_fd_handler(rdma->channel->fd, rdma_accept_incoming_migration, | |
| NULL, | |
| (void *)(intptr_t)rdma->return_path); | |
| } else { | |
| qemu_set_fd_handler(rdma->channel->fd, rdma_cm_poll_handler, | |
| NULL, rdma); | |
| } | |
| ret = rdma_accept(rdma->cm_id, &conn_param); | |
| if (ret < 0) { | |
| error_report("rdma_accept failed"); | |
| goto err_rdma_dest_wait; | |
| } | |
| ret = rdma_get_cm_event(rdma->channel, &cm_event); | |
| if (ret < 0) { | |
| error_report("rdma_accept get_cm_event failed"); | |
| goto err_rdma_dest_wait; | |
| } | |
| if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) { | |
| error_report("rdma_accept not event established"); | |
| rdma_ack_cm_event(cm_event); | |
| goto err_rdma_dest_wait; | |
| } | |
| rdma_ack_cm_event(cm_event); | |
| rdma->connected = true; | |
| qemu_rdma_dump_gid("dest_connect", rdma->cm_id); | |
| return 0; | |
| err_rdma_dest_wait: | |
| rdma->errored = true; | |
| qemu_rdma_cleanup(rdma); | |
| g_free(rdma_return_path); | |
| return -1; | |
| } | |
| static int dest_ram_sort_func(const void *a, const void *b) | |
| { | |
| unsigned int a_index = ((const RDMALocalBlock *)a)->src_index; | |
| unsigned int b_index = ((const RDMALocalBlock *)b)->src_index; | |
| return (a_index < b_index) ? -1 : (a_index != b_index); | |
| } | |
| static bool rdma_compress_range_check(RDMALocalBlock *block, | |
| RDMACompress *comp) | |
| { | |
| uint64_t block_end = block->offset + block->length; | |
| uint64_t comp_end; | |
| if (uadd64_overflow(comp->offset, comp->length, &comp_end)) { | |
| goto fail; | |
| } | |
| if (comp->offset < block->offset || comp_end > block_end) { | |
| goto fail; | |
| } | |
| return true; | |
| fail: | |
| error_report("%s: compress request range outside range" | |
| " (block=%s, offset=%"PRIu64", length=%"PRIu64")", | |
| __func__, block->block_name, comp->offset, comp->length); | |
| return false; | |
| } | |
| /* | |
| * During each iteration of the migration, we listen for instructions | |
| * by the source VM to perform dynamic page registrations before they | |
| * can perform RDMA operations. | |
| * | |
| * We respond with the 'rkey'. | |
| * | |
| * Keep doing this until the source tells us to stop. | |
| */ | |
| int rdma_registration_handle(QEMUFile *f) | |
| { | |
| RDMAControlHeader reg_resp = { .len = sizeof(RDMARegisterResult), | |
| .type = RDMA_CONTROL_REGISTER_RESULT, | |
| .repeat = 0, | |
| }; | |
| RDMAControlHeader blocks = { .type = RDMA_CONTROL_RAM_BLOCKS_RESULT, | |
| .repeat = 1 }; | |
| QIOChannelRDMA *rioc; | |
| Error *err = NULL; | |
| RDMAContext *rdma; | |
| RDMALocalBlocks *local; | |
| RDMAControlHeader head; | |
| RDMARegister *reg, *registers; | |
| RDMACompress *comp; | |
| RDMARegisterResult *reg_result; | |
| static RDMARegisterResult results[RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE]; | |
| RDMALocalBlock *block; | |
| void *host_addr; | |
| int ret; | |
| int idx = 0; | |
| if (!migrate_rdma()) { | |
| return 0; | |
| } | |
| RCU_READ_LOCK_GUARD(); | |
| rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | |
| rdma = qatomic_rcu_read(&rioc->rdmain); | |
| if (!rdma) { | |
| return -1; | |
| } | |
| if (rdma_errored(rdma)) { | |
| return -1; | |
| } | |
| local = &rdma->local_ram_blocks; | |
| do { | |
| trace_rdma_registration_handle_wait(); | |
| ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_NONE, &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| break; | |
| } | |
| if (head.repeat > RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE) { | |
| error_report("rdma: Too many requests in this message (%d)." | |
| "Bailing.", head.repeat); | |
| break; | |
| } | |
| switch (head.type) { | |
| case RDMA_CONTROL_COMPRESS: | |
| comp = (RDMACompress *) rdma->wr_data[idx].control_curr; | |
| network_to_compress(comp); | |
| trace_rdma_registration_handle_compress(comp->length, | |
| comp->block_idx, | |
| comp->offset); | |
| if (comp->block_idx >= rdma->local_ram_blocks.nb_blocks) { | |
| error_report("rdma: 'compress' bad block index %u (vs %d)", | |
| (unsigned int)comp->block_idx, | |
| rdma->local_ram_blocks.nb_blocks); | |
| goto err; | |
| } | |
| block = &(rdma->local_ram_blocks.block[comp->block_idx]); | |
| if (!rdma_compress_range_check(block, comp)) { | |
| goto err; | |
| } | |
| host_addr = block->local_host_addr + | |
| (comp->offset - block->offset); | |
| if (comp->value) { | |
| error_report("rdma: Zero page with non-zero (%d) value", | |
| comp->value); | |
| goto err; | |
| } | |
| ram_handle_zero(host_addr, comp->length); | |
| break; | |
| case RDMA_CONTROL_REGISTER_FINISHED: | |
| trace_rdma_registration_handle_finished(); | |
| return 0; | |
| case RDMA_CONTROL_RAM_BLOCKS_REQUEST: | |
| trace_rdma_registration_handle_ram_blocks(); | |
| /* Sort our local RAM Block list so it's the same as the source, | |
| * we can do this since we've filled in a src_index in the list | |
| * as we received the RAMBlock list earlier. | |
| */ | |
| qsort(rdma->local_ram_blocks.block, | |
| rdma->local_ram_blocks.nb_blocks, | |
| sizeof(RDMALocalBlock), dest_ram_sort_func); | |
| for (int i = 0; i < local->nb_blocks; i++) { | |
| local->block[i].index = i; | |
| } | |
| if (rdma->pin_all) { | |
| ret = qemu_rdma_reg_whole_ram_blocks(rdma, &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| goto err; | |
| } | |
| } | |
| /* | |
| * Dest uses this to prepare to transmit the RAMBlock descriptions | |
| * to the source VM after connection setup. | |
| * Both sides use the "remote" structure to communicate and update | |
| * their "local" descriptions with what was sent. | |
| */ | |
| for (int i = 0; i < local->nb_blocks; i++) { | |
| rdma->dest_blocks[i].remote_host_addr = | |
| (uintptr_t)(local->block[i].local_host_addr); | |
| if (rdma->pin_all) { | |
| rdma->dest_blocks[i].remote_rkey = local->block[i].mr->rkey; | |
| } | |
| rdma->dest_blocks[i].offset = local->block[i].offset; | |
| rdma->dest_blocks[i].length = local->block[i].length; | |
| dest_block_to_network(&rdma->dest_blocks[i]); | |
| trace_rdma_registration_handle_ram_blocks_loop( | |
| local->block[i].block_name, | |
| local->block[i].offset, | |
| local->block[i].length, | |
| local->block[i].local_host_addr, | |
| local->block[i].src_index); | |
| } | |
| blocks.len = rdma->local_ram_blocks.nb_blocks | |
| * sizeof(RDMADestBlock); | |
| ret = qemu_rdma_post_send_control(rdma, | |
| (uint8_t *) rdma->dest_blocks, &blocks, | |
| &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| goto err; | |
| } | |
| break; | |
| case RDMA_CONTROL_REGISTER_REQUEST: | |
| trace_rdma_registration_handle_register(head.repeat); | |
| reg_resp.repeat = head.repeat; | |
| registers = (RDMARegister *) rdma->wr_data[idx].control_curr; | |
| /* Making sure the register buffers to read are valid */ | |
| if (head.len != head.repeat * sizeof(RDMARegister)) { | |
| error_report("%s: Invalid RDMA_CONTROL_REGISTER_REQUEST " | |
| "(head.repeat=%"PRIu32", head.len=%"PRIu32")", | |
| __func__, head.repeat, head.len); | |
| goto err; | |
| } | |
| for (int count = 0; count < head.repeat; count++) { | |
| uint64_t chunk, chunk_sum; | |
| uint8_t *chunk_start, *chunk_end; | |
| reg = ®isters[count]; | |
| network_to_register(reg); | |
| reg_result = &results[count]; | |
| trace_rdma_registration_handle_register_loop(count, | |
| reg->current_index, reg->current_addr, reg->chunks); | |
| if (reg->current_index >= rdma->local_ram_blocks.nb_blocks) { | |
| error_report("rdma: 'register' bad block index %u (vs %d)", | |
| (unsigned int)reg->current_index, | |
| rdma->local_ram_blocks.nb_blocks); | |
| goto err; | |
| } | |
| block = &(rdma->local_ram_blocks.block[reg->current_index]); | |
| if (block->offset > reg->current_addr || | |
| block->offset + block->length <= reg->current_addr) { | |
| error_report("rdma: bad register address for block %s" | |
| " offset: %" PRIx64 " current_addr: %" PRIx64, | |
| block->block_name, block->offset, | |
| reg->current_addr); | |
| goto err; | |
| } | |
| host_addr = (block->local_host_addr + | |
| (reg->current_addr - block->offset)); | |
| chunk = ram_chunk_index(block->local_host_addr, | |
| (uint8_t *) host_addr); | |
| chunk_start = ram_chunk_start(block, chunk); | |
| if (uadd64_overflow(chunk, reg->chunks, &chunk_sum) || | |
| chunk_sum >= block->nb_chunks) { | |
| error_report("%s: head.chunks contains illegal value" | |
| " (chunk=%"PRIu64", chunks=%"PRIu64", " | |
| "nb_chunks=%d)", __func__, chunk, | |
| reg->chunks, block->nb_chunks); | |
| goto err; | |
| } | |
| chunk_end = ram_chunk_end(block, chunk + reg->chunks); | |
| /* avoid "-Waddress-of-packed-member" warning */ | |
| uint32_t tmp_rkey = 0; | |
| if (qemu_rdma_register_and_get_keys(rdma, block, | |
| (uintptr_t)host_addr, NULL, &tmp_rkey, | |
| chunk, chunk_start, chunk_end)) { | |
| error_report("cannot get rkey"); | |
| goto err; | |
| } | |
| reg_result->rkey = tmp_rkey; | |
| reg_result->host_addr = (uintptr_t)block->local_host_addr; | |
| trace_rdma_registration_handle_register_rkey(reg_result->rkey); | |
| result_to_network(reg_result); | |
| } | |
| ret = qemu_rdma_post_send_control(rdma, | |
| (uint8_t *) results, ®_resp, &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| goto err; | |
| } | |
| break; | |
| case RDMA_CONTROL_REGISTER_RESULT: | |
| error_report("Invalid RESULT message at dest."); | |
| goto err; | |
| default: | |
| error_report("Unknown control message %s", control_desc(head.type)); | |
| goto err; | |
| } | |
| } while (1); | |
| err: | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| /* Destination: | |
| * Called during the initial RAM load section which lists the | |
| * RAMBlocks by name. This lets us know the order of the RAMBlocks on | |
| * the source. We've already built our local RAMBlock list, but not | |
| * yet sent the list to the source. | |
| */ | |
| int rdma_block_notification_handle(QEMUFile *f, const char *name) | |
| { | |
| int curr; | |
| int found = -1; | |
| if (!migrate_rdma()) { | |
| return 0; | |
| } | |
| RCU_READ_LOCK_GUARD(); | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | |
| RDMAContext *rdma = qatomic_rcu_read(&rioc->rdmain); | |
| if (!rdma) { | |
| return -1; | |
| } | |
| /* Find the matching RAMBlock in our local list */ | |
| for (curr = 0; curr < rdma->local_ram_blocks.nb_blocks; curr++) { | |
| if (!strcmp(rdma->local_ram_blocks.block[curr].block_name, name)) { | |
| found = curr; | |
| break; | |
| } | |
| } | |
| if (found == -1) { | |
| error_report("RAMBlock '%s' not found on destination", name); | |
| return -1; | |
| } | |
| rdma->local_ram_blocks.block[curr].src_index = rdma->next_src_index; | |
| trace_rdma_block_notification_handle(name, rdma->next_src_index); | |
| rdma->next_src_index++; | |
| return 0; | |
| } | |
| int rdma_registration_start(QEMUFile *f, uint64_t flags) | |
| { | |
| if (!migrate_rdma()) { | |
| return 0; | |
| } | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | |
| RCU_READ_LOCK_GUARD(); | |
| RDMAContext *rdma = qatomic_rcu_read(&rioc->rdmaout); | |
| if (!rdma) { | |
| return -1; | |
| } | |
| if (rdma_errored(rdma)) { | |
| return -1; | |
| } | |
| trace_rdma_registration_start(flags); | |
| qemu_put_be64(f, RAM_SAVE_FLAG_HOOK); | |
| return qemu_fflush(f); | |
| } | |
| /* | |
| * Inform dest that dynamic registrations are done for now. | |
| * Post any buffered write before sending the control marker. Outstanding | |
| * writes are drained at the RAM scan round boundary. | |
| */ | |
| int rdma_registration_stop(QEMUFile *f, uint64_t flags) | |
| { | |
| QIOChannelRDMA *rioc; | |
| Error *err = NULL; | |
| RDMAContext *rdma; | |
| RDMAControlHeader head = { .len = 0, .repeat = 1 }; | |
| int ret; | |
| if (!migrate_rdma()) { | |
| return 0; | |
| } | |
| RCU_READ_LOCK_GUARD(); | |
| rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | |
| rdma = qatomic_rcu_read(&rioc->rdmaout); | |
| if (!rdma) { | |
| return -1; | |
| } | |
| if (rdma_errored(rdma)) { | |
| return -1; | |
| } | |
| qemu_fflush(f); | |
| ret = qemu_rdma_write_flush(rdma, &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| goto err; | |
| } | |
| if (flags == RAM_CONTROL_SETUP) { | |
| RDMAControlHeader resp = {.type = RDMA_CONTROL_RAM_BLOCKS_RESULT }; | |
| RDMALocalBlocks *local = &rdma->local_ram_blocks; | |
| int reg_result_idx, nb_dest_blocks; | |
| head.type = RDMA_CONTROL_RAM_BLOCKS_REQUEST; | |
| trace_rdma_registration_stop_ram(); | |
| /* | |
| * Make sure that we parallelize the pinning on both sides. | |
| * For very large guests, doing this serially takes a really | |
| * long time, so we have to 'interleave' the pinning locally | |
| * with the control messages by performing the pinning on this | |
| * side before we receive the control response from the other | |
| * side that the pinning has completed. | |
| */ | |
| ret = qemu_rdma_exchange_send(rdma, &head, NULL, &resp, | |
| ®_result_idx, rdma->pin_all ? | |
| qemu_rdma_reg_whole_ram_blocks : NULL, | |
| &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| return -1; | |
| } | |
| nb_dest_blocks = resp.len / sizeof(RDMADestBlock); | |
| /* | |
| * The protocol uses two different sets of rkeys (mutually exclusive): | |
| * 1. One key to represent the virtual address of the entire ram block. | |
| * (dynamic chunk registration disabled - pin everything with one rkey.) | |
| * 2. One to represent individual chunks within a ram block. | |
| * (dynamic chunk registration enabled - pin individual chunks.) | |
| * | |
| * Once the capability is successfully negotiated, the destination transmits | |
| * the keys to use (or sends them later) including the virtual addresses | |
| * and then propagates the remote ram block descriptions to his local copy. | |
| */ | |
| if (local->nb_blocks != nb_dest_blocks) { | |
| error_report("ram blocks mismatch (Number of blocks %d vs %d)", | |
| local->nb_blocks, nb_dest_blocks); | |
| error_printf("Your QEMU command line parameters are probably " | |
| "not identical on both the source and destination."); | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| qemu_rdma_move_header(rdma, reg_result_idx, &resp); | |
| memcpy(rdma->dest_blocks, | |
| rdma->wr_data[reg_result_idx].control_curr, resp.len); | |
| for (int i = 0; i < nb_dest_blocks; i++) { | |
| network_to_dest_block(&rdma->dest_blocks[i]); | |
| /* We require that the blocks are in the same order */ | |
| if (rdma->dest_blocks[i].length != local->block[i].length) { | |
| error_report("Block %s/%d has a different length %" PRIu64 | |
| "vs %" PRIu64, | |
| local->block[i].block_name, i, | |
| local->block[i].length, | |
| rdma->dest_blocks[i].length); | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| local->block[i].remote_host_addr = | |
| rdma->dest_blocks[i].remote_host_addr; | |
| local->block[i].remote_rkey = rdma->dest_blocks[i].remote_rkey; | |
| } | |
| } | |
| trace_rdma_registration_stop(flags); | |
| head.type = RDMA_CONTROL_REGISTER_FINISHED; | |
| ret = qemu_rdma_exchange_send(rdma, &head, NULL, NULL, NULL, NULL, &err); | |
| if (ret < 0) { | |
| error_report_err(err); | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| rdma->errored = true; | |
| return -1; | |
| } | |
| static void qio_channel_rdma_finalize(Object *obj) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(obj); | |
| if (rioc->rdmain) { | |
| qemu_rdma_cleanup(rioc->rdmain); | |
| g_free(rioc->rdmain); | |
| rioc->rdmain = NULL; | |
| } | |
| if (rioc->rdmaout) { | |
| qemu_rdma_cleanup(rioc->rdmaout); | |
| g_free(rioc->rdmaout); | |
| rioc->rdmaout = NULL; | |
| } | |
| } | |
| static void qio_channel_rdma_class_init(ObjectClass *klass, | |
| const void *class_data G_GNUC_UNUSED) | |
| { | |
| QIOChannelClass *ioc_klass = QIO_CHANNEL_CLASS(klass); | |
| ioc_klass->io_writev = qio_channel_rdma_writev; | |
| ioc_klass->io_readv = qio_channel_rdma_readv; | |
| ioc_klass->io_set_blocking = qio_channel_rdma_set_blocking; | |
| ioc_klass->io_close = qio_channel_rdma_close; | |
| ioc_klass->io_create_watch = qio_channel_rdma_create_watch; | |
| ioc_klass->io_set_aio_fd_handler = qio_channel_rdma_set_aio_fd_handler; | |
| ioc_klass->io_shutdown = qio_channel_rdma_shutdown; | |
| } | |
| static const TypeInfo qio_channel_rdma_info = { | |
| .parent = TYPE_QIO_CHANNEL, | |
| .name = TYPE_QIO_CHANNEL_RDMA, | |
| .instance_size = sizeof(QIOChannelRDMA), | |
| .instance_finalize = qio_channel_rdma_finalize, | |
| .class_init = qio_channel_rdma_class_init, | |
| }; | |
| static void qio_channel_rdma_register_types(void) | |
| { | |
| type_register_static(&qio_channel_rdma_info); | |
| } | |
| type_init(qio_channel_rdma_register_types); | |
| static void rdma_register_migration_notifiers(void) | |
| { | |
| ram_round_add_notifier(&rdma_ram_round_notifier); | |
| } | |
| migration_init(rdma_register_migration_notifiers); | |
| static QIOChannel *rdma_new_input(RDMAContext *rdma) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA)); | |
| rioc->rdmain = rdma; | |
| rioc->rdmaout = rdma->return_path; | |
| return QIO_CHANNEL(rioc); | |
| } | |
| static QIOChannel *rdma_new_output(RDMAContext *rdma) | |
| { | |
| QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA)); | |
| rioc->rdmaout = rdma; | |
| rioc->rdmain = rdma->return_path; | |
| return QIO_CHANNEL(rioc); | |
| } | |
| static void rdma_accept_incoming_migration(void *opaque) | |
| { | |
| RDMAContext *rdma = opaque; | |
| QIOChannel *ioc; | |
| trace_rdma_accept_incoming_migration(); | |
| if (qemu_rdma_accept(rdma) < 0) { | |
| error_report("RDMA ERROR: Migration initialization failed"); | |
| return; | |
| } | |
| trace_rdma_accept_incoming_migration_accepted(); | |
| if (rdma->is_return_path) { | |
| return; | |
| } | |
| ioc = rdma_new_input(rdma); | |
| if (ioc == NULL) { | |
| error_report("RDMA ERROR: could not open RDMA for input"); | |
| qemu_rdma_cleanup(rdma); | |
| return; | |
| } | |
| rdma->migration_started_on_destination = 1; | |
| migration_incoming_setup(ioc, CH_MAIN, &error_abort); | |
| migration_start_incoming(); | |
| } | |
| void rdma_connect_incoming(InetSocketAddress *host_port, Error **errp) | |
| { | |
| MigrationState *s = migrate_get_current(); | |
| int ret; | |
| RDMAContext *rdma; | |
| trace_rdma_connect_incoming(); | |
| /* Avoid ram_block_discard_disable(), cannot change during migration. */ | |
| if (ram_block_discard_is_required()) { | |
| error_setg(errp, "RDMA: cannot disable RAM discard"); | |
| return; | |
| } | |
| rdma = qemu_rdma_data_init(host_port, errp); | |
| if (rdma == NULL) { | |
| goto err; | |
| } | |
| ret = qemu_rdma_dest_init(rdma, errp); | |
| if (ret < 0) { | |
| goto err; | |
| } | |
| trace_rdma_connect_incoming_after_dest_init(); | |
| ret = rdma_listen(rdma->listen_id, 5); | |
| if (ret < 0) { | |
| error_setg(errp, "RDMA ERROR: listening on socket!"); | |
| goto cleanup_rdma; | |
| } | |
| trace_rdma_connect_incoming_after_rdma_listen(); | |
| s->rdma_migration = true; | |
| qemu_set_fd_handler(rdma->channel->fd, rdma_accept_incoming_migration, | |
| NULL, (void *)(intptr_t)rdma); | |
| return; | |
| cleanup_rdma: | |
| qemu_rdma_cleanup(rdma); | |
| err: | |
| if (rdma) { | |
| g_free(rdma->host); | |
| } | |
| g_free(rdma); | |
| } | |
| QIOChannel *rdma_connect_outgoing(void *opaque, | |
| InetSocketAddress *host_port, Error **errp) | |
| { | |
| MigrationState *s = opaque; | |
| RDMAContext *rdma_return_path = NULL; | |
| RDMAContext *rdma; | |
| int ret; | |
| /* Avoid ram_block_discard_disable(), cannot change during migration. */ | |
| if (ram_block_discard_is_required()) { | |
| error_setg(errp, "RDMA: cannot disable RAM discard"); | |
| return NULL; | |
| } | |
| rdma = qemu_rdma_data_init(host_port, errp); | |
| if (rdma == NULL) { | |
| goto err; | |
| } | |
| ret = qemu_rdma_source_init(rdma, migrate_rdma_pin_all(), errp); | |
| if (ret < 0) { | |
| goto err; | |
| } | |
| trace_rdma_connect_outgoing_after_rdma_source_init(); | |
| ret = qemu_rdma_connect(rdma, false, errp); | |
| if (ret < 0) { | |
| goto err; | |
| } | |
| /* RDMA postcopy need a separate queue pair for return path */ | |
| if (migrate_postcopy() || migrate_return_path()) { | |
| rdma_return_path = qemu_rdma_data_init(host_port, errp); | |
| if (rdma_return_path == NULL) { | |
| goto return_path_err; | |
| } | |
| ret = qemu_rdma_source_init(rdma_return_path, | |
| migrate_rdma_pin_all(), errp); | |
| if (ret < 0) { | |
| goto return_path_err; | |
| } | |
| ret = qemu_rdma_connect(rdma_return_path, true, errp); | |
| if (ret < 0) { | |
| goto return_path_err; | |
| } | |
| rdma->return_path = rdma_return_path; | |
| rdma_return_path->return_path = rdma; | |
| rdma_return_path->is_return_path = true; | |
| } | |
| trace_rdma_connect_outgoing_after_rdma_connect(); | |
| s->rdma_migration = true; | |
| return rdma_new_output(rdma); | |
| return_path_err: | |
| qemu_rdma_cleanup(rdma); | |
| err: | |
| g_free(rdma); | |
| g_free(rdma_return_path); | |
| return NULL; | |
| } |