| #ifndef XEN_PT_H |
| #define XEN_PT_H |
| |
| #include "qemu-common.h" |
| #include "xen_common.h" |
| #include "pci.h" |
| #include "xen-host-pci-device.h" |
| |
| void xen_pt_log(const PCIDevice *d, const char *f, ...) GCC_FMT_ATTR(2, 3); |
| |
| #define XEN_PT_ERR(d, _f, _a...) xen_pt_log(d, "%s: Error: "_f, __func__, ##_a) |
| |
| #ifdef XEN_PT_LOGGING_ENABLED |
| # define XEN_PT_LOG(d, _f, _a...) xen_pt_log(d, "%s: " _f, __func__, ##_a) |
| # define XEN_PT_WARN(d, _f, _a...) \ |
| xen_pt_log(d, "%s: Warning: "_f, __func__, ##_a) |
| #else |
| # define XEN_PT_LOG(d, _f, _a...) |
| # define XEN_PT_WARN(d, _f, _a...) |
| #endif |
| |
| #ifdef XEN_PT_DEBUG_PCI_CONFIG_ACCESS |
| # define XEN_PT_LOG_CONFIG(d, addr, val, len) \ |
| xen_pt_log(d, "%s: address=0x%04x val=0x%08x len=%d\n", \ |
| __func__, addr, val, len) |
| #else |
| # define XEN_PT_LOG_CONFIG(d, addr, val, len) |
| #endif |
| |
| |
| /* Helper */ |
| #define XEN_PFN(x) ((x) >> XC_PAGE_SHIFT) |
| |
| typedef struct XenPTRegInfo XenPTRegInfo; |
| typedef struct XenPTReg XenPTReg; |
| |
| typedef struct XenPCIPassthroughState XenPCIPassthroughState; |
| |
| /* function type for config reg */ |
| typedef int (*xen_pt_conf_reg_init) |
| (XenPCIPassthroughState *, XenPTRegInfo *, uint32_t real_offset, |
| uint32_t *data); |
| typedef int (*xen_pt_conf_dword_write) |
| (XenPCIPassthroughState *, XenPTReg *cfg_entry, |
| uint32_t *val, uint32_t dev_value, uint32_t valid_mask); |
| typedef int (*xen_pt_conf_word_write) |
| (XenPCIPassthroughState *, XenPTReg *cfg_entry, |
| uint16_t *val, uint16_t dev_value, uint16_t valid_mask); |
| typedef int (*xen_pt_conf_byte_write) |
| (XenPCIPassthroughState *, XenPTReg *cfg_entry, |
| uint8_t *val, uint8_t dev_value, uint8_t valid_mask); |
| typedef int (*xen_pt_conf_dword_read) |
| (XenPCIPassthroughState *, XenPTReg *cfg_entry, |
| uint32_t *val, uint32_t valid_mask); |
| typedef int (*xen_pt_conf_word_read) |
| (XenPCIPassthroughState *, XenPTReg *cfg_entry, |
| uint16_t *val, uint16_t valid_mask); |
| typedef int (*xen_pt_conf_byte_read) |
| (XenPCIPassthroughState *, XenPTReg *cfg_entry, |
| uint8_t *val, uint8_t valid_mask); |
| |
| #define XEN_PT_BAR_ALLF 0xFFFFFFFF |
| #define XEN_PT_BAR_UNMAPPED (-1) |
| |
| #define PCI_CAP_MAX 48 |
| |
| |
| typedef enum { |
| XEN_PT_GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */ |
| XEN_PT_GRP_TYPE_EMU, /* emul reg group */ |
| } XenPTRegisterGroupType; |
| |
| typedef enum { |
| XEN_PT_BAR_FLAG_MEM = 0, /* Memory type BAR */ |
| XEN_PT_BAR_FLAG_IO, /* I/O type BAR */ |
| XEN_PT_BAR_FLAG_UPPER, /* upper 64bit BAR */ |
| XEN_PT_BAR_FLAG_UNUSED, /* unused BAR */ |
| } XenPTBarFlag; |
| |
| |
| typedef struct XenPTRegion { |
| /* BAR flag */ |
| XenPTBarFlag bar_flag; |
| /* Translation of the emulated address */ |
| union { |
| uint64_t maddr; |
| uint64_t pio_base; |
| uint64_t u; |
| } access; |
| } XenPTRegion; |
| |
| /* XenPTRegInfo declaration |
| * - only for emulated register (either a part or whole bit). |
| * - for passthrough register that need special behavior (like interacting with |
| * other component), set emu_mask to all 0 and specify r/w func properly. |
| * - do NOT use ALL F for init_val, otherwise the tbl will not be registered. |
| */ |
| |
| /* emulated register information */ |
| struct XenPTRegInfo { |
| uint32_t offset; |
| uint32_t size; |
| uint32_t init_val; |
| /* reg read only field mask (ON:RO/ROS, OFF:other) */ |
| uint32_t ro_mask; |
| /* reg emulate field mask (ON:emu, OFF:passthrough) */ |
| uint32_t emu_mask; |
| /* no write back allowed */ |
| uint32_t no_wb; |
| xen_pt_conf_reg_init init; |
| /* read/write function pointer |
| * for double_word/word/byte size */ |
| union { |
| struct { |
| xen_pt_conf_dword_write write; |
| xen_pt_conf_dword_read read; |
| } dw; |
| struct { |
| xen_pt_conf_word_write write; |
| xen_pt_conf_word_read read; |
| } w; |
| struct { |
| xen_pt_conf_byte_write write; |
| xen_pt_conf_byte_read read; |
| } b; |
| } u; |
| }; |
| |
| /* emulated register management */ |
| struct XenPTReg { |
| QLIST_ENTRY(XenPTReg) entries; |
| XenPTRegInfo *reg; |
| uint32_t data; /* emulated value */ |
| }; |
| |
| typedef struct XenPTRegGroupInfo XenPTRegGroupInfo; |
| |
| /* emul reg group size initialize method */ |
| typedef int (*xen_pt_reg_size_init_fn) |
| (XenPCIPassthroughState *, const XenPTRegGroupInfo *, |
| uint32_t base_offset, uint8_t *size); |
| |
| /* emulated register group information */ |
| struct XenPTRegGroupInfo { |
| uint8_t grp_id; |
| XenPTRegisterGroupType grp_type; |
| uint8_t grp_size; |
| xen_pt_reg_size_init_fn size_init; |
| XenPTRegInfo *emu_regs; |
| }; |
| |
| /* emul register group management table */ |
| typedef struct XenPTRegGroup { |
| QLIST_ENTRY(XenPTRegGroup) entries; |
| const XenPTRegGroupInfo *reg_grp; |
| uint32_t base_offset; |
| uint8_t size; |
| QLIST_HEAD(, XenPTReg) reg_tbl_list; |
| } XenPTRegGroup; |
| |
| |
| #define XEN_PT_UNASSIGNED_PIRQ (-1) |
| typedef struct XenPTMSI { |
| uint16_t flags; |
| uint32_t addr_lo; /* guest message address */ |
| uint32_t addr_hi; /* guest message upper address */ |
| uint16_t data; /* guest message data */ |
| uint32_t ctrl_offset; /* saved control offset */ |
| int pirq; /* guest pirq corresponding */ |
| bool initialized; /* when guest MSI is initialized */ |
| bool mapped; /* when pirq is mapped */ |
| } XenPTMSI; |
| |
| typedef struct XenPTMSIXEntry { |
| int pirq; |
| uint64_t addr; |
| uint32_t data; |
| uint32_t vector_ctrl; |
| bool updated; /* indicate whether MSI ADDR or DATA is updated */ |
| } XenPTMSIXEntry; |
| typedef struct XenPTMSIX { |
| uint32_t ctrl_offset; |
| bool enabled; |
| int total_entries; |
| int bar_index; |
| uint64_t table_base; |
| uint32_t table_offset_adjust; /* page align mmap */ |
| uint64_t mmio_base_addr; |
| MemoryRegion mmio; |
| void *phys_iomem_base; |
| XenPTMSIXEntry msix_entry[0]; |
| } XenPTMSIX; |
| |
| struct XenPCIPassthroughState { |
| PCIDevice dev; |
| |
| PCIHostDeviceAddress hostaddr; |
| bool is_virtfn; |
| XenHostPCIDevice real_device; |
| XenPTRegion bases[PCI_NUM_REGIONS]; /* Access regions */ |
| QLIST_HEAD(, XenPTRegGroup) reg_grps; |
| |
| uint32_t machine_irq; |
| |
| XenPTMSI *msi; |
| XenPTMSIX *msix; |
| |
| MemoryRegion bar[PCI_NUM_REGIONS - 1]; |
| MemoryRegion rom; |
| |
| MemoryListener memory_listener; |
| MemoryListener io_listener; |
| }; |
| |
| int xen_pt_config_init(XenPCIPassthroughState *s); |
| void xen_pt_config_delete(XenPCIPassthroughState *s); |
| XenPTRegGroup *xen_pt_find_reg_grp(XenPCIPassthroughState *s, uint32_t address); |
| XenPTReg *xen_pt_find_reg(XenPTRegGroup *reg_grp, uint32_t address); |
| int xen_pt_bar_offset_to_index(uint32_t offset); |
| |
| static inline pcibus_t xen_pt_get_emul_size(XenPTBarFlag flag, pcibus_t r_size) |
| { |
| /* align resource size (memory type only) */ |
| if (flag == XEN_PT_BAR_FLAG_MEM) { |
| return (r_size + XC_PAGE_SIZE - 1) & XC_PAGE_MASK; |
| } else { |
| return r_size; |
| } |
| } |
| |
| /* INTx */ |
| /* The PCI Local Bus Specification, Rev. 3.0, |
| * Section 6.2.4 Miscellaneous Registers, pp 223 |
| * outlines 5 valid values for the interrupt pin (intx). |
| * 0: For devices (or device functions) that don't use an interrupt in |
| * 1: INTA# |
| * 2: INTB# |
| * 3: INTC# |
| * 4: INTD# |
| * |
| * Xen uses the following 4 values for intx |
| * 0: INTA# |
| * 1: INTB# |
| * 2: INTC# |
| * 3: INTD# |
| * |
| * Observing that these list of values are not the same, xen_pt_pci_read_intx() |
| * uses the following mapping from hw to xen values. |
| * This seems to reflect the current usage within Xen. |
| * |
| * PCI hardware | Xen | Notes |
| * ----------------+-----+---------------------------------------------------- |
| * 0 | 0 | No interrupt |
| * 1 | 0 | INTA# |
| * 2 | 1 | INTB# |
| * 3 | 2 | INTC# |
| * 4 | 3 | INTD# |
| * any other value | 0 | This should never happen, log error message |
| */ |
| |
| static inline uint8_t xen_pt_pci_read_intx(XenPCIPassthroughState *s) |
| { |
| uint8_t v = 0; |
| xen_host_pci_get_byte(&s->real_device, PCI_INTERRUPT_PIN, &v); |
| return v; |
| } |
| |
| static inline uint8_t xen_pt_pci_intx(XenPCIPassthroughState *s) |
| { |
| uint8_t r_val = xen_pt_pci_read_intx(s); |
| |
| XEN_PT_LOG(&s->dev, "intx=%i\n", r_val); |
| if (r_val < 1 || r_val > 4) { |
| XEN_PT_LOG(&s->dev, "Interrupt pin read from hardware is out of range:" |
| " value=%i, acceptable range is 1 - 4\n", r_val); |
| r_val = 0; |
| } else { |
| r_val -= 1; |
| } |
| |
| return r_val; |
| } |
| |
| /* MSI/MSI-X */ |
| int xen_pt_msi_set_enable(XenPCIPassthroughState *s, bool en); |
| int xen_pt_msi_setup(XenPCIPassthroughState *s); |
| int xen_pt_msi_update(XenPCIPassthroughState *d); |
| void xen_pt_msi_disable(XenPCIPassthroughState *s); |
| |
| int xen_pt_msix_init(XenPCIPassthroughState *s, uint32_t base); |
| void xen_pt_msix_delete(XenPCIPassthroughState *s); |
| int xen_pt_msix_update(XenPCIPassthroughState *s); |
| int xen_pt_msix_update_remap(XenPCIPassthroughState *s, int bar_index); |
| void xen_pt_msix_disable(XenPCIPassthroughState *s); |
| |
| static inline bool xen_pt_has_msix_mapping(XenPCIPassthroughState *s, int bar) |
| { |
| return s->msix && s->msix->bar_index == bar; |
| } |
| |
| |
| #endif /* !XEN_PT_H */ |