hw/gpio/nrf51_gpio.c - qemu - Git at Google

 /*
  * nRF51 System-on-Chip general purpose input/output register definition
  *
  * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
  * Product Spec: http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.1.pdf
  *
  * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
  *
  * This code is licensed under the GPL version 2 or later.  See
  * the COPYING file in the top-level directory.
  */

 #include "qemu/osdep.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "hw/gpio/nrf51_gpio.h"
 #include "hw/irq.h"
 #include "migration/vmstate.h"
 #include "trace.h"

 /*
  * Check if the output driver is connected to the direction switch
  * given the current configuration and logic level.
  * It is not differentiated between standard and "high"(-power) drive modes.
  */
 static bool is_connected(uint32_t config, uint32_t level)
 {
     bool state;
     uint32_t drive_config = extract32(config, 8, 3);

     switch (drive_config) {
     case 0 ... 3:
         state = true;
         break;
     case 4 ... 5:
         state = level != 0;
         break;
     case 6 ... 7:
         state = level == 0;
         break;
     default:
         g_assert_not_reached();
         break;
     }

     return state;
 }

 static int pull_value(uint32_t config)
 {
     int pull = extract32(config, 2, 2);
     if (pull == NRF51_GPIO_PULLDOWN) {
         return 0;
     } else if (pull == NRF51_GPIO_PULLUP) {
         return 1;
     }
     return -1;
 }

 static void update_output_irq(NRF51GPIOState *s, size_t i,
                               bool connected, bool level)
 {
     int64_t irq_level = connected ? level : -1;
     bool old_connected = extract32(s->old_out_connected, i, 1);
     bool old_level = extract32(s->old_out, i, 1);

     if ((old_connected != connected) || (old_level != level)) {
         qemu_set_irq(s->output[i], irq_level);
         trace_nrf51_gpio_update_output_irq(i, irq_level);
     }

     s->old_out = deposit32(s->old_out, i, 1, level);
     s->old_out_connected = deposit32(s->old_out_connected, i, 1, connected);
 }

 static void update_state(NRF51GPIOState *s)
 {
     int pull;
     size_t i;
     bool connected_out, dir, connected_in, out, in, input;
     bool assert_detect = false;

     for (i = 0; i < NRF51_GPIO_PINS; i++) {
         pull = pull_value(s->cnf[i]);
         dir = extract32(s->cnf[i], 0, 1);
         connected_in = extract32(s->in_mask, i, 1);
         out = extract32(s->out, i, 1);
         in = extract32(s->in, i, 1);
         input = !extract32(s->cnf[i], 1, 1);
         connected_out = is_connected(s->cnf[i], out) && dir;

         if (!input) {
             if (pull >= 0) {
                 /* Input buffer disconnected from external drives */
                 s->in = deposit32(s->in, i, 1, pull);
             }
         } else {
             if (connected_out && connected_in && out != in) {
                 /* Pin both driven externally and internally */
                 qemu_log_mask(LOG_GUEST_ERROR,
                               "GPIO pin %zu short circuited\n", i);
             }
             if (connected_in) {
                 uint32_t detect_config = extract32(s->cnf[i], 16, 2);
                 if ((detect_config == 2) && (in == 1)) {
                     assert_detect = true;
                 }
                 if ((detect_config == 3) && (in == 0)) {
                     assert_detect = true;
                 }
             } else {
                 /*
                  * Floating input: the output stimulates IN if connected,
                  * otherwise pull-up/pull-down resistors put a value on both
                  * IN and OUT.
                  */
                 if (pull >= 0 && !connected_out) {
                     connected_out = true;
                     out = pull;
                 }
                 if (connected_out) {
                     s->in = deposit32(s->in, i, 1, out);
                 }
             }
         }
         update_output_irq(s, i, connected_out, out);
     }

     qemu_set_irq(s->detect, assert_detect);
 }

 /*
  * Direction is exposed in both the DIR register and the DIR bit
  * of each PINs CNF configuration register. Reflect bits for pins in DIR
  * to individual pin configuration registers.
  */
 static void reflect_dir_bit_in_cnf(NRF51GPIOState *s)
 {
     size_t i;

     uint32_t value = s->dir;

     for (i = 0; i < NRF51_GPIO_PINS; i++) {
         s->cnf[i] = (s->cnf[i] & ~(1UL)) | ((value >> i) & 0x01);
     }
 }

 static uint64_t nrf51_gpio_read(void *opaque, hwaddr offset, unsigned int size)
 {
     NRF51GPIOState *s = NRF51_GPIO(opaque);
     uint64_t r = 0;
     size_t idx;

     switch (offset) {
     case NRF51_GPIO_REG_OUT ... NRF51_GPIO_REG_OUTCLR:
         r = s->out;
         break;

     case NRF51_GPIO_REG_IN:
         r = s->in;
         break;

     case NRF51_GPIO_REG_DIR ... NRF51_GPIO_REG_DIRCLR:
         r = s->dir;
         break;

     case NRF51_GPIO_REG_CNF_START ... NRF51_GPIO_REG_CNF_END:
         idx = (offset - NRF51_GPIO_REG_CNF_START) / 4;
         r = s->cnf[idx];
         break;

     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                 "%s: bad read offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
     }

     trace_nrf51_gpio_read(offset, r);

     return r;
 }

 static void nrf51_gpio_write(void *opaque, hwaddr offset,
                        uint64_t value, unsigned int size)
 {
     NRF51GPIOState *s = NRF51_GPIO(opaque);
     size_t idx;

     trace_nrf51_gpio_write(offset, value);

     switch (offset) {
     case NRF51_GPIO_REG_OUT:
         s->out = value;
         break;

     case NRF51_GPIO_REG_OUTSET:
         s->out |= value;
         break;

     case NRF51_GPIO_REG_OUTCLR:
         s->out &= ~value;
         break;

     case NRF51_GPIO_REG_DIR:
         s->dir = value;
         reflect_dir_bit_in_cnf(s);
         break;

     case NRF51_GPIO_REG_DIRSET:
         s->dir |= value;
         reflect_dir_bit_in_cnf(s);
         break;

     case NRF51_GPIO_REG_DIRCLR:
         s->dir &= ~value;
         reflect_dir_bit_in_cnf(s);
         break;

     case NRF51_GPIO_REG_CNF_START ... NRF51_GPIO_REG_CNF_END:
         idx = (offset - NRF51_GPIO_REG_CNF_START) / 4;
         s->cnf[idx] = value;
         /*
          * direction is exposed in both the DIR register and the DIR bit
          * of each PINs CNF configuration register.
          */
         s->dir = (s->dir & ~(1UL << idx)) | ((value & 0x01) << idx);
         break;

     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: bad write offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
     }

     update_state(s);
 }

 static const MemoryRegionOps gpio_ops = {
     .read =  nrf51_gpio_read,
     .write = nrf51_gpio_write,
     .endianness = DEVICE_LITTLE_ENDIAN,
     .impl.min_access_size = 4,
     .impl.max_access_size = 4,
 };

 static void nrf51_gpio_set(void *opaque, int line, int value)
 {
     NRF51GPIOState *s = NRF51_GPIO(opaque);

     trace_nrf51_gpio_set(line, value);

     assert(line >= 0 && line < NRF51_GPIO_PINS);

     s->in_mask = deposit32(s->in_mask, line, 1, value >= 0);
     if (value >= 0) {
         s->in = deposit32(s->in, line, 1, value != 0);
     }

     update_state(s);
 }

 static void nrf51_gpio_reset(DeviceState *dev)
 {
     NRF51GPIOState *s = NRF51_GPIO(dev);
     size_t i;

     s->out = 0;
     s->old_out = 0;
     s->old_out_connected = 0;
     s->in = 0;
     s->in_mask = 0;
     s->dir = 0;

     for (i = 0; i < NRF51_GPIO_PINS; i++) {
         s->cnf[i] = 0x00000002;
     }
 }

 static const VMStateDescription vmstate_nrf51_gpio = {
     .name = TYPE_NRF51_GPIO,
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(out, NRF51GPIOState),
         VMSTATE_UINT32(in, NRF51GPIOState),
         VMSTATE_UINT32(in_mask, NRF51GPIOState),
         VMSTATE_UINT32(dir, NRF51GPIOState),
         VMSTATE_UINT32_ARRAY(cnf, NRF51GPIOState, NRF51_GPIO_PINS),
         VMSTATE_UINT32(old_out, NRF51GPIOState),
         VMSTATE_UINT32(old_out_connected, NRF51GPIOState),
         VMSTATE_END_OF_LIST()
     }
 };

 static void nrf51_gpio_init(Object *obj)
 {
     NRF51GPIOState *s = NRF51_GPIO(obj);

     memory_region_init_io(&s->mmio, obj, &gpio_ops, s,
             TYPE_NRF51_GPIO, NRF51_GPIO_SIZE);
     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);

     qdev_init_gpio_in(DEVICE(s), nrf51_gpio_set, NRF51_GPIO_PINS);
     qdev_init_gpio_out(DEVICE(s), s->output, NRF51_GPIO_PINS);
     qdev_init_gpio_out_named(DEVICE(s), &s->detect, "detect", 1);
 }

 static void nrf51_gpio_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);

     dc->vmsd = &vmstate_nrf51_gpio;
     dc->reset = nrf51_gpio_reset;
     dc->desc = "nRF51 GPIO";
 }

 static const TypeInfo nrf51_gpio_info = {
     .name = TYPE_NRF51_GPIO,
     .parent = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(NRF51GPIOState),
     .instance_init = nrf51_gpio_init,
     .class_init = nrf51_gpio_class_init
 };

 static void nrf51_gpio_register_types(void)
 {
     type_register_static(&nrf51_gpio_info);
 }

 type_init(nrf51_gpio_register_types)
	/*
	* nRF51 System-on-Chip general purpose input/output register definition
	*
	* Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
	* Product Spec: http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.1.pdf
	*
	* Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de>
	*
	* This code is licensed under the GPL version 2 or later. See
	* the COPYING file in the top-level directory.
	*/

	#include "qemu/osdep.h"
	#include "qemu/log.h"
	#include "qemu/module.h"
	#include "hw/gpio/nrf51_gpio.h"
	#include "hw/irq.h"
	#include "migration/vmstate.h"
	#include "trace.h"

	/*
	* Check if the output driver is connected to the direction switch
	* given the current configuration and logic level.
	* It is not differentiated between standard and "high"(-power) drive modes.
	*/
	static bool is_connected(uint32_t config, uint32_t level)
	{
	bool state;
	uint32_t drive_config = extract32(config, 8, 3);

	switch (drive_config) {
	case 0 ... 3:
	state = true;
	break;
	case 4 ... 5:
	state = level != 0;
	break;
	case 6 ... 7:
	state = level == 0;
	break;
	default:
	g_assert_not_reached();
	break;
	}

	return state;
	}

	static int pull_value(uint32_t config)
	{
	int pull = extract32(config, 2, 2);
	if (pull == NRF51_GPIO_PULLDOWN) {
	return 0;
	} else if (pull == NRF51_GPIO_PULLUP) {
	return 1;
	}
	return -1;
	}

	static void update_output_irq(NRF51GPIOState *s, size_t i,
	bool connected, bool level)
	{
	int64_t irq_level = connected ? level : -1;
	bool old_connected = extract32(s->old_out_connected, i, 1);
	bool old_level = extract32(s->old_out, i, 1);

	if ((old_connected != connected) \|\| (old_level != level)) {
	qemu_set_irq(s->output[i], irq_level);
	trace_nrf51_gpio_update_output_irq(i, irq_level);
	}

	s->old_out = deposit32(s->old_out, i, 1, level);
	s->old_out_connected = deposit32(s->old_out_connected, i, 1, connected);
	}

	static void update_state(NRF51GPIOState *s)
	{
	int pull;
	size_t i;
	bool connected_out, dir, connected_in, out, in, input;
	bool assert_detect = false;

	for (i = 0; i < NRF51_GPIO_PINS; i++) {
	pull = pull_value(s->cnf[i]);
	dir = extract32(s->cnf[i], 0, 1);
	connected_in = extract32(s->in_mask, i, 1);
	out = extract32(s->out, i, 1);
	in = extract32(s->in, i, 1);
	input = !extract32(s->cnf[i], 1, 1);
	connected_out = is_connected(s->cnf[i], out) && dir;

	if (!input) {
	if (pull >= 0) {
	/* Input buffer disconnected from external drives */
	s->in = deposit32(s->in, i, 1, pull);
	}
	} else {
	if (connected_out && connected_in && out != in) {
	/* Pin both driven externally and internally */
	qemu_log_mask(LOG_GUEST_ERROR,
	"GPIO pin %zu short circuited\n", i);
	}
	if (connected_in) {
	uint32_t detect_config = extract32(s->cnf[i], 16, 2);
	if ((detect_config == 2) && (in == 1)) {
	assert_detect = true;
	}
	if ((detect_config == 3) && (in == 0)) {
	assert_detect = true;
	}
	} else {
	/*
	* Floating input: the output stimulates IN if connected,
	* otherwise pull-up/pull-down resistors put a value on both
	* IN and OUT.
	*/
	if (pull >= 0 && !connected_out) {
	connected_out = true;
	out = pull;
	}
	if (connected_out) {
	s->in = deposit32(s->in, i, 1, out);
	}
	}
	}
	update_output_irq(s, i, connected_out, out);
	}

	qemu_set_irq(s->detect, assert_detect);
	}

	/*
	* Direction is exposed in both the DIR register and the DIR bit
	* of each PINs CNF configuration register. Reflect bits for pins in DIR
	* to individual pin configuration registers.
	*/
	static void reflect_dir_bit_in_cnf(NRF51GPIOState *s)
	{
	size_t i;

	uint32_t value = s->dir;

	for (i = 0; i < NRF51_GPIO_PINS; i++) {
	s->cnf[i] = (s->cnf[i] & ~(1UL)) \| ((value >> i) & 0x01);
	}
	}

	static uint64_t nrf51_gpio_read(void *opaque, hwaddr offset, unsigned int size)
	{
	NRF51GPIOState *s = NRF51_GPIO(opaque);
	uint64_t r = 0;
	size_t idx;

	switch (offset) {
	case NRF51_GPIO_REG_OUT ... NRF51_GPIO_REG_OUTCLR:
	r = s->out;
	break;

	case NRF51_GPIO_REG_IN:
	r = s->in;
	break;

	case NRF51_GPIO_REG_DIR ... NRF51_GPIO_REG_DIRCLR:
	r = s->dir;
	break;

	case NRF51_GPIO_REG_CNF_START ... NRF51_GPIO_REG_CNF_END:
	idx = (offset - NRF51_GPIO_REG_CNF_START) / 4;
	r = s->cnf[idx];
	break;

	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: bad read offset 0x%" HWADDR_PRIx "\n",
	__func__, offset);
	}

	trace_nrf51_gpio_read(offset, r);

	return r;
	}

	static void nrf51_gpio_write(void *opaque, hwaddr offset,
	uint64_t value, unsigned int size)
	{
	NRF51GPIOState *s = NRF51_GPIO(opaque);
	size_t idx;

	trace_nrf51_gpio_write(offset, value);

	switch (offset) {
	case NRF51_GPIO_REG_OUT:
	s->out = value;
	break;

	case NRF51_GPIO_REG_OUTSET:
	s->out \|= value;
	break;

	case NRF51_GPIO_REG_OUTCLR:
	s->out &= ~value;
	break;

	case NRF51_GPIO_REG_DIR:
	s->dir = value;
	reflect_dir_bit_in_cnf(s);
	break;

	case NRF51_GPIO_REG_DIRSET:
	s->dir \|= value;
	reflect_dir_bit_in_cnf(s);
	break;

	case NRF51_GPIO_REG_DIRCLR:
	s->dir &= ~value;
	reflect_dir_bit_in_cnf(s);
	break;

	case NRF51_GPIO_REG_CNF_START ... NRF51_GPIO_REG_CNF_END:
	idx = (offset - NRF51_GPIO_REG_CNF_START) / 4;
	s->cnf[idx] = value;
	/*
	* direction is exposed in both the DIR register and the DIR bit
	* of each PINs CNF configuration register.
	*/
	s->dir = (s->dir & ~(1UL << idx)) \| ((value & 0x01) << idx);
	break;

	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: bad write offset 0x%" HWADDR_PRIx "\n",
	__func__, offset);
	}

	update_state(s);
	}

	static const MemoryRegionOps gpio_ops = {
	.read = nrf51_gpio_read,
	.write = nrf51_gpio_write,
	.endianness = DEVICE_LITTLE_ENDIAN,
	.impl.min_access_size = 4,
	.impl.max_access_size = 4,
	};

	static void nrf51_gpio_set(void *opaque, int line, int value)
	{
	NRF51GPIOState *s = NRF51_GPIO(opaque);

	trace_nrf51_gpio_set(line, value);

	assert(line >= 0 && line < NRF51_GPIO_PINS);

	s->in_mask = deposit32(s->in_mask, line, 1, value >= 0);
	if (value >= 0) {
	s->in = deposit32(s->in, line, 1, value != 0);
	}

	update_state(s);
	}

	static void nrf51_gpio_reset(DeviceState *dev)
	{
	NRF51GPIOState *s = NRF51_GPIO(dev);
	size_t i;

	s->out = 0;
	s->old_out = 0;
	s->old_out_connected = 0;
	s->in = 0;
	s->in_mask = 0;
	s->dir = 0;

	for (i = 0; i < NRF51_GPIO_PINS; i++) {
	s->cnf[i] = 0x00000002;
	}
	}

	static const VMStateDescription vmstate_nrf51_gpio = {
	.name = TYPE_NRF51_GPIO,
	.version_id = 1,
	.minimum_version_id = 1,
	.fields = (VMStateField[]) {
	VMSTATE_UINT32(out, NRF51GPIOState),
	VMSTATE_UINT32(in, NRF51GPIOState),
	VMSTATE_UINT32(in_mask, NRF51GPIOState),
	VMSTATE_UINT32(dir, NRF51GPIOState),
	VMSTATE_UINT32_ARRAY(cnf, NRF51GPIOState, NRF51_GPIO_PINS),
	VMSTATE_UINT32(old_out, NRF51GPIOState),
	VMSTATE_UINT32(old_out_connected, NRF51GPIOState),
	VMSTATE_END_OF_LIST()
	}
	};

	static void nrf51_gpio_init(Object *obj)
	{
	NRF51GPIOState *s = NRF51_GPIO(obj);

	memory_region_init_io(&s->mmio, obj, &gpio_ops, s,
	TYPE_NRF51_GPIO, NRF51_GPIO_SIZE);
	sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);

	qdev_init_gpio_in(DEVICE(s), nrf51_gpio_set, NRF51_GPIO_PINS);
	qdev_init_gpio_out(DEVICE(s), s->output, NRF51_GPIO_PINS);
	qdev_init_gpio_out_named(DEVICE(s), &s->detect, "detect", 1);
	}

	static void nrf51_gpio_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);

	dc->vmsd = &vmstate_nrf51_gpio;
	dc->reset = nrf51_gpio_reset;
	dc->desc = "nRF51 GPIO";
	}

	static const TypeInfo nrf51_gpio_info = {
	.name = TYPE_NRF51_GPIO,
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(NRF51GPIOState),
	.instance_init = nrf51_gpio_init,
	.class_init = nrf51_gpio_class_init
	};

	static void nrf51_gpio_register_types(void)
	{
	type_register_static(&nrf51_gpio_info);
	}

	type_init(nrf51_gpio_register_types)