| /* |
| * QTest testcase for VirtIO Block Device |
| * |
| * Copyright (c) 2014 SUSE LINUX Products GmbH |
| * Copyright (c) 2014 Marc MarĂ |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "libqtest.h" |
| #include "libqos/virtio.h" |
| #include "libqos/virtio-pci.h" |
| #include "libqos/virtio-mmio.h" |
| #include "libqos/pci-pc.h" |
| #include "libqos/malloc.h" |
| #include "libqos/malloc-pc.h" |
| #include "libqos/malloc-generic.h" |
| #include "qemu/bswap.h" |
| |
| #define QVIRTIO_BLK_F_BARRIER 0x00000001 |
| #define QVIRTIO_BLK_F_SIZE_MAX 0x00000002 |
| #define QVIRTIO_BLK_F_SEG_MAX 0x00000004 |
| #define QVIRTIO_BLK_F_GEOMETRY 0x00000010 |
| #define QVIRTIO_BLK_F_RO 0x00000020 |
| #define QVIRTIO_BLK_F_BLK_SIZE 0x00000040 |
| #define QVIRTIO_BLK_F_SCSI 0x00000080 |
| #define QVIRTIO_BLK_F_WCE 0x00000200 |
| #define QVIRTIO_BLK_F_TOPOLOGY 0x00000400 |
| #define QVIRTIO_BLK_F_CONFIG_WCE 0x00000800 |
| |
| #define QVIRTIO_BLK_T_IN 0 |
| #define QVIRTIO_BLK_T_OUT 1 |
| #define QVIRTIO_BLK_T_SCSI_CMD 2 |
| #define QVIRTIO_BLK_T_SCSI_CMD_OUT 3 |
| #define QVIRTIO_BLK_T_FLUSH 4 |
| #define QVIRTIO_BLK_T_FLUSH_OUT 5 |
| #define QVIRTIO_BLK_T_GET_ID 8 |
| |
| #define TEST_IMAGE_SIZE (64 * 1024 * 1024) |
| #define QVIRTIO_BLK_TIMEOUT_US (30 * 1000 * 1000) |
| #define PCI_SLOT_HP 0x06 |
| #define PCI_SLOT 0x04 |
| #define PCI_FN 0x00 |
| |
| #define MMIO_PAGE_SIZE 4096 |
| #define MMIO_DEV_BASE_ADDR 0x0A003E00 |
| #define MMIO_RAM_ADDR 0x40000000 |
| #define MMIO_RAM_SIZE 0x20000000 |
| |
| typedef struct QVirtioBlkReq { |
| uint32_t type; |
| uint32_t ioprio; |
| uint64_t sector; |
| char *data; |
| uint8_t status; |
| } QVirtioBlkReq; |
| |
| static char *drive_create(void) |
| { |
| int fd, ret; |
| char *tmp_path = g_strdup("/tmp/qtest.XXXXXX"); |
| |
| /* Create a temporary raw image */ |
| fd = mkstemp(tmp_path); |
| g_assert_cmpint(fd, >=, 0); |
| ret = ftruncate(fd, TEST_IMAGE_SIZE); |
| g_assert_cmpint(ret, ==, 0); |
| close(fd); |
| |
| return tmp_path; |
| } |
| |
| static QPCIBus *pci_test_start(void) |
| { |
| char *cmdline; |
| char *tmp_path; |
| |
| tmp_path = drive_create(); |
| |
| cmdline = g_strdup_printf("-drive if=none,id=drive0,file=%s,format=raw " |
| "-drive if=none,id=drive1,file=/dev/null,format=raw " |
| "-device virtio-blk-pci,id=drv0,drive=drive0," |
| "addr=%x.%x", |
| tmp_path, PCI_SLOT, PCI_FN); |
| qtest_start(cmdline); |
| unlink(tmp_path); |
| g_free(tmp_path); |
| g_free(cmdline); |
| |
| return qpci_init_pc(); |
| } |
| |
| static void arm_test_start(void) |
| { |
| char *cmdline; |
| char *tmp_path; |
| |
| tmp_path = drive_create(); |
| |
| cmdline = g_strdup_printf("-machine virt " |
| "-drive if=none,id=drive0,file=%s,format=raw " |
| "-device virtio-blk-device,drive=drive0", |
| tmp_path); |
| qtest_start(cmdline); |
| unlink(tmp_path); |
| g_free(tmp_path); |
| g_free(cmdline); |
| } |
| |
| static void test_end(void) |
| { |
| qtest_end(); |
| } |
| |
| static QVirtioPCIDevice *virtio_blk_pci_init(QPCIBus *bus, int slot) |
| { |
| QVirtioPCIDevice *dev; |
| |
| dev = qvirtio_pci_device_find(bus, QVIRTIO_BLK_DEVICE_ID); |
| g_assert(dev != NULL); |
| g_assert_cmphex(dev->vdev.device_type, ==, QVIRTIO_BLK_DEVICE_ID); |
| g_assert_cmphex(dev->pdev->devfn, ==, ((slot << 3) | PCI_FN)); |
| |
| qvirtio_pci_device_enable(dev); |
| qvirtio_reset(&qvirtio_pci, &dev->vdev); |
| qvirtio_set_acknowledge(&qvirtio_pci, &dev->vdev); |
| qvirtio_set_driver(&qvirtio_pci, &dev->vdev); |
| |
| return dev; |
| } |
| |
| static inline void virtio_blk_fix_request(QVirtioBlkReq *req) |
| { |
| #ifdef HOST_WORDS_BIGENDIAN |
| bool host_endian = true; |
| #else |
| bool host_endian = false; |
| #endif |
| |
| if (qtest_big_endian() != host_endian) { |
| req->type = bswap32(req->type); |
| req->ioprio = bswap32(req->ioprio); |
| req->sector = bswap64(req->sector); |
| } |
| } |
| |
| static uint64_t virtio_blk_request(QGuestAllocator *alloc, QVirtioBlkReq *req, |
| uint64_t data_size) |
| { |
| uint64_t addr; |
| uint8_t status = 0xFF; |
| |
| g_assert_cmpuint(data_size % 512, ==, 0); |
| addr = guest_alloc(alloc, sizeof(*req) + data_size); |
| |
| virtio_blk_fix_request(req); |
| |
| memwrite(addr, req, 16); |
| memwrite(addr + 16, req->data, data_size); |
| memwrite(addr + 16 + data_size, &status, sizeof(status)); |
| |
| return addr; |
| } |
| |
| static void test_basic(const QVirtioBus *bus, QVirtioDevice *dev, |
| QGuestAllocator *alloc, QVirtQueue *vq, uint64_t device_specific) |
| { |
| QVirtioBlkReq req; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint32_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| |
| capacity = qvirtio_config_readq(bus, dev, device_specific); |
| |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| features = qvirtio_get_features(bus, dev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| QVIRTIO_F_RING_INDIRECT_DESC | QVIRTIO_F_RING_EVENT_IDX | |
| QVIRTIO_BLK_F_SCSI); |
| qvirtio_set_features(bus, dev, features); |
| |
| qvirtio_set_driver_ok(bus, dev); |
| |
| /* Write and read with 3 descriptor layout */ |
| /* Write request */ |
| req.type = QVIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(vq, req_addr, 16, false, true); |
| qvirtqueue_add(vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(bus, dev, vq, free_head); |
| |
| qvirtio_wait_queue_isr(bus, dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = QVIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(vq, req_addr, 16, false, true); |
| qvirtqueue_add(vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(bus, dev, vq, free_head); |
| |
| qvirtio_wait_queue_isr(bus, dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| |
| if (features & QVIRTIO_F_ANY_LAYOUT) { |
| /* Write and read with 2 descriptor layout */ |
| /* Write request */ |
| req.type = QVIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(vq, req_addr, 528, false, true); |
| qvirtqueue_add(vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(bus, dev, vq, free_head); |
| |
| qvirtio_wait_queue_isr(bus, dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = QVIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(vq, req_addr, 16, false, true); |
| qvirtqueue_add(vq, req_addr + 16, 513, true, false); |
| |
| qvirtqueue_kick(bus, dev, vq, free_head); |
| |
| qvirtio_wait_queue_isr(bus, dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| } |
| } |
| |
| static void pci_basic(void) |
| { |
| QVirtioPCIDevice *dev; |
| QPCIBus *bus; |
| QVirtQueuePCI *vqpci; |
| QGuestAllocator *alloc; |
| void *addr; |
| |
| bus = pci_test_start(); |
| dev = virtio_blk_pci_init(bus, PCI_SLOT); |
| |
| alloc = pc_alloc_init(); |
| vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&qvirtio_pci, &dev->vdev, |
| alloc, 0); |
| |
| /* MSI-X is not enabled */ |
| addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_NO_MSIX; |
| |
| test_basic(&qvirtio_pci, &dev->vdev, alloc, &vqpci->vq, |
| (uint64_t)(uintptr_t)addr); |
| |
| /* End test */ |
| guest_free(alloc, vqpci->vq.desc); |
| pc_alloc_uninit(alloc); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qpci_free_pc(bus); |
| test_end(); |
| } |
| |
| static void pci_indirect(void) |
| { |
| QVirtioPCIDevice *dev; |
| QPCIBus *bus; |
| QVirtQueuePCI *vqpci; |
| QGuestAllocator *alloc; |
| QVirtioBlkReq req; |
| QVRingIndirectDesc *indirect; |
| void *addr; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint32_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| |
| bus = pci_test_start(); |
| |
| dev = virtio_blk_pci_init(bus, PCI_SLOT); |
| |
| /* MSI-X is not enabled */ |
| addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_NO_MSIX; |
| |
| capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev, |
| (uint64_t)(uintptr_t)addr); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| features = qvirtio_get_features(&qvirtio_pci, &dev->vdev); |
| g_assert_cmphex(features & QVIRTIO_F_RING_INDIRECT_DESC, !=, 0); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | QVIRTIO_F_RING_EVENT_IDX | |
| QVIRTIO_BLK_F_SCSI); |
| qvirtio_set_features(&qvirtio_pci, &dev->vdev, features); |
| |
| alloc = pc_alloc_init(); |
| vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&qvirtio_pci, &dev->vdev, |
| alloc, 0); |
| qvirtio_set_driver_ok(&qvirtio_pci, &dev->vdev); |
| |
| /* Write request */ |
| req.type = QVIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| indirect = qvring_indirect_desc_setup(&dev->vdev, alloc, 2); |
| qvring_indirect_desc_add(indirect, req_addr, 528, false); |
| qvring_indirect_desc_add(indirect, req_addr + 528, 1, true); |
| free_head = qvirtqueue_add_indirect(&vqpci->vq, indirect); |
| qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| g_free(indirect); |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = QVIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| indirect = qvring_indirect_desc_setup(&dev->vdev, alloc, 2); |
| qvring_indirect_desc_add(indirect, req_addr, 16, false); |
| qvring_indirect_desc_add(indirect, req_addr + 16, 513, true); |
| free_head = qvirtqueue_add_indirect(&vqpci->vq, indirect); |
| qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| g_free(indirect); |
| guest_free(alloc, req_addr); |
| |
| /* End test */ |
| guest_free(alloc, vqpci->vq.desc); |
| pc_alloc_uninit(alloc); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qpci_free_pc(bus); |
| test_end(); |
| } |
| |
| static void pci_config(void) |
| { |
| QVirtioPCIDevice *dev; |
| QPCIBus *bus; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| void *addr; |
| uint64_t capacity; |
| |
| bus = pci_test_start(); |
| |
| dev = virtio_blk_pci_init(bus, PCI_SLOT); |
| |
| /* MSI-X is not enabled */ |
| addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_NO_MSIX; |
| |
| capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev, |
| (uint64_t)(uintptr_t)addr); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| qvirtio_set_driver_ok(&qvirtio_pci, &dev->vdev); |
| |
| qmp("{ 'execute': 'block_resize', 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| qvirtio_wait_config_isr(&qvirtio_pci, &dev->vdev, QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev, |
| (uint64_t)(uintptr_t)addr); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qpci_free_pc(bus); |
| test_end(); |
| } |
| |
| static void pci_msix(void) |
| { |
| QVirtioPCIDevice *dev; |
| QPCIBus *bus; |
| QVirtQueuePCI *vqpci; |
| QGuestAllocator *alloc; |
| QVirtioBlkReq req; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| void *addr; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint32_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| |
| bus = pci_test_start(); |
| alloc = pc_alloc_init(); |
| |
| dev = virtio_blk_pci_init(bus, PCI_SLOT); |
| qpci_msix_enable(dev->pdev); |
| |
| qvirtio_pci_set_msix_configuration_vector(dev, alloc, 0); |
| |
| /* MSI-X is enabled */ |
| addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_MSIX; |
| |
| capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev, |
| (uint64_t)(uintptr_t)addr); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| features = qvirtio_get_features(&qvirtio_pci, &dev->vdev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| QVIRTIO_F_RING_INDIRECT_DESC | |
| QVIRTIO_F_RING_EVENT_IDX | QVIRTIO_BLK_F_SCSI); |
| qvirtio_set_features(&qvirtio_pci, &dev->vdev, features); |
| |
| vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&qvirtio_pci, &dev->vdev, |
| alloc, 0); |
| qvirtqueue_pci_msix_setup(dev, vqpci, alloc, 1); |
| |
| qvirtio_set_driver_ok(&qvirtio_pci, &dev->vdev); |
| |
| qmp("{ 'execute': 'block_resize', 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| |
| qvirtio_wait_config_isr(&qvirtio_pci, &dev->vdev, QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev, |
| (uint64_t)(uintptr_t)addr); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| |
| /* Write request */ |
| req.type = QVIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = QVIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head); |
| |
| |
| qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| |
| /* End test */ |
| guest_free(alloc, vqpci->vq.desc); |
| pc_alloc_uninit(alloc); |
| qpci_msix_disable(dev->pdev); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qpci_free_pc(bus); |
| test_end(); |
| } |
| |
| static void pci_idx(void) |
| { |
| QVirtioPCIDevice *dev; |
| QPCIBus *bus; |
| QVirtQueuePCI *vqpci; |
| QGuestAllocator *alloc; |
| QVirtioBlkReq req; |
| void *addr; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint32_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| |
| bus = pci_test_start(); |
| alloc = pc_alloc_init(); |
| |
| dev = virtio_blk_pci_init(bus, PCI_SLOT); |
| qpci_msix_enable(dev->pdev); |
| |
| qvirtio_pci_set_msix_configuration_vector(dev, alloc, 0); |
| |
| /* MSI-X is enabled */ |
| addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_MSIX; |
| |
| capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev, |
| (uint64_t)(uintptr_t)addr); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| features = qvirtio_get_features(&qvirtio_pci, &dev->vdev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| QVIRTIO_F_RING_INDIRECT_DESC | |
| QVIRTIO_F_NOTIFY_ON_EMPTY | QVIRTIO_BLK_F_SCSI); |
| qvirtio_set_features(&qvirtio_pci, &dev->vdev, features); |
| |
| vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&qvirtio_pci, &dev->vdev, |
| alloc, 0); |
| qvirtqueue_pci_msix_setup(dev, vqpci, alloc, 1); |
| |
| qvirtio_set_driver_ok(&qvirtio_pci, &dev->vdev); |
| |
| /* Write request */ |
| req.type = QVIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| /* Write request */ |
| req.type = QVIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| /* Notify after processing the third request */ |
| qvirtqueue_set_used_event(&vqpci->vq, 2); |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head); |
| |
| /* No notification expected */ |
| status = qvirtio_wait_status_byte_no_isr(&qvirtio_pci, &dev->vdev, |
| &vqpci->vq, req_addr + 528, |
| QVIRTIO_BLK_TIMEOUT_US); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = QVIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| |
| /* End test */ |
| guest_free(alloc, vqpci->vq.desc); |
| pc_alloc_uninit(alloc); |
| qpci_msix_disable(dev->pdev); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qpci_free_pc(bus); |
| test_end(); |
| } |
| |
| static void pci_hotplug(void) |
| { |
| QPCIBus *bus; |
| QVirtioPCIDevice *dev; |
| |
| bus = pci_test_start(); |
| |
| /* plug secondary disk */ |
| qpci_plug_device_test("virtio-blk-pci", "drv1", PCI_SLOT_HP, |
| "'drive': 'drive1'"); |
| |
| dev = virtio_blk_pci_init(bus, PCI_SLOT_HP); |
| g_assert(dev); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| |
| /* unplug secondary disk */ |
| qpci_unplug_acpi_device_test("drv1", PCI_SLOT_HP); |
| qpci_free_pc(bus); |
| test_end(); |
| } |
| |
| static void mmio_basic(void) |
| { |
| QVirtioMMIODevice *dev; |
| QVirtQueue *vq; |
| QGuestAllocator *alloc; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| uint64_t capacity; |
| |
| arm_test_start(); |
| |
| dev = qvirtio_mmio_init_device(MMIO_DEV_BASE_ADDR, MMIO_PAGE_SIZE); |
| g_assert(dev != NULL); |
| g_assert_cmphex(dev->vdev.device_type, ==, QVIRTIO_BLK_DEVICE_ID); |
| |
| qvirtio_reset(&qvirtio_mmio, &dev->vdev); |
| qvirtio_set_acknowledge(&qvirtio_mmio, &dev->vdev); |
| qvirtio_set_driver(&qvirtio_mmio, &dev->vdev); |
| |
| alloc = generic_alloc_init(MMIO_RAM_ADDR, MMIO_RAM_SIZE, MMIO_PAGE_SIZE); |
| vq = qvirtqueue_setup(&qvirtio_mmio, &dev->vdev, alloc, 0); |
| |
| test_basic(&qvirtio_mmio, &dev->vdev, alloc, vq, |
| QVIRTIO_MMIO_DEVICE_SPECIFIC); |
| |
| qmp("{ 'execute': 'block_resize', 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| |
| qvirtio_wait_queue_isr(&qvirtio_mmio, &dev->vdev, vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(&qvirtio_mmio, &dev->vdev, |
| QVIRTIO_MMIO_DEVICE_SPECIFIC); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| |
| /* End test */ |
| guest_free(alloc, vq->desc); |
| generic_alloc_uninit(alloc); |
| g_free(dev); |
| test_end(); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int ret; |
| const char *arch = qtest_get_arch(); |
| |
| g_test_init(&argc, &argv, NULL); |
| |
| if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { |
| qtest_add_func("/virtio/blk/pci/basic", pci_basic); |
| qtest_add_func("/virtio/blk/pci/indirect", pci_indirect); |
| qtest_add_func("/virtio/blk/pci/config", pci_config); |
| qtest_add_func("/virtio/blk/pci/msix", pci_msix); |
| qtest_add_func("/virtio/blk/pci/idx", pci_idx); |
| qtest_add_func("/virtio/blk/pci/hotplug", pci_hotplug); |
| } else if (strcmp(arch, "arm") == 0) { |
| qtest_add_func("/virtio/blk/mmio/basic", mmio_basic); |
| } |
| |
| ret = g_test_run(); |
| |
| return ret; |
| } |