| /* |
| * qtest I440FX test case |
| * |
| * Copyright IBM, Corp. 2012-2013 |
| * Copyright Red Hat, Inc. 2013 |
| * |
| * Authors: |
| * Anthony Liguori <aliguori@us.ibm.com> |
| * Laszlo Ersek <lersek@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include <sys/mman.h> |
| |
| #include "libqtest.h" |
| #include "libqos/pci.h" |
| #include "libqos/pci-pc.h" |
| #include "hw/pci/pci_regs.h" |
| |
| #define BROKEN 1 |
| |
| typedef struct TestData |
| { |
| int num_cpus; |
| } TestData; |
| |
| typedef struct FirmwareTestFixture { |
| /* decides whether we're testing -bios or -pflash */ |
| bool is_bios; |
| } FirmwareTestFixture; |
| |
| static QPCIBus *test_start_get_bus(const TestData *s) |
| { |
| char *cmdline; |
| |
| cmdline = g_strdup_printf("-smp %d", s->num_cpus); |
| qtest_start(cmdline); |
| g_free(cmdline); |
| return qpci_init_pc(); |
| } |
| |
| static void test_i440fx_defaults(gconstpointer opaque) |
| { |
| const TestData *s = opaque; |
| QPCIBus *bus; |
| QPCIDevice *dev; |
| uint32_t value; |
| |
| bus = test_start_get_bus(s); |
| dev = qpci_device_find(bus, QPCI_DEVFN(0, 0)); |
| g_assert(dev != NULL); |
| |
| /* 3.2.2 */ |
| g_assert_cmpint(qpci_config_readw(dev, PCI_VENDOR_ID), ==, 0x8086); |
| /* 3.2.3 */ |
| g_assert_cmpint(qpci_config_readw(dev, PCI_DEVICE_ID), ==, 0x1237); |
| #ifndef BROKEN |
| /* 3.2.4 */ |
| g_assert_cmpint(qpci_config_readw(dev, PCI_COMMAND), ==, 0x0006); |
| /* 3.2.5 */ |
| g_assert_cmpint(qpci_config_readw(dev, PCI_STATUS), ==, 0x0280); |
| #endif |
| /* 3.2.7 */ |
| g_assert_cmpint(qpci_config_readb(dev, PCI_CLASS_PROG), ==, 0x00); |
| g_assert_cmpint(qpci_config_readw(dev, PCI_CLASS_DEVICE), ==, 0x0600); |
| /* 3.2.8 */ |
| g_assert_cmpint(qpci_config_readb(dev, PCI_LATENCY_TIMER), ==, 0x00); |
| /* 3.2.9 */ |
| g_assert_cmpint(qpci_config_readb(dev, PCI_HEADER_TYPE), ==, 0x00); |
| /* 3.2.10 */ |
| g_assert_cmpint(qpci_config_readb(dev, PCI_BIST), ==, 0x00); |
| |
| /* 3.2.11 */ |
| value = qpci_config_readw(dev, 0x50); /* PMCCFG */ |
| if (s->num_cpus == 1) { /* WPE */ |
| g_assert(!(value & (1 << 15))); |
| } else { |
| g_assert((value & (1 << 15))); |
| } |
| |
| g_assert(!(value & (1 << 6))); /* EPTE */ |
| |
| /* 3.2.12 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x52), ==, 0x00); /* DETURBO */ |
| /* 3.2.13 */ |
| #ifndef BROKEN |
| g_assert_cmpint(qpci_config_readb(dev, 0x53), ==, 0x80); /* DBC */ |
| #endif |
| /* 3.2.14 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x54), ==, 0x00); /* AXC */ |
| /* 3.2.15 */ |
| g_assert_cmpint(qpci_config_readw(dev, 0x55), ==, 0x0000); /* DRT */ |
| #ifndef BROKEN |
| /* 3.2.16 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x57), ==, 0x01); /* DRAMC */ |
| /* 3.2.17 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x58), ==, 0x10); /* DRAMT */ |
| #endif |
| /* 3.2.18 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x59), ==, 0x00); /* PAM0 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x5A), ==, 0x00); /* PAM1 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x5B), ==, 0x00); /* PAM2 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x5C), ==, 0x00); /* PAM3 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x5D), ==, 0x00); /* PAM4 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x5E), ==, 0x00); /* PAM5 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x5F), ==, 0x00); /* PAM6 */ |
| #ifndef BROKEN |
| /* 3.2.19 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x60), ==, 0x01); /* DRB0 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x61), ==, 0x01); /* DRB1 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x62), ==, 0x01); /* DRB2 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x63), ==, 0x01); /* DRB3 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x64), ==, 0x01); /* DRB4 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x65), ==, 0x01); /* DRB5 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x66), ==, 0x01); /* DRB6 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x67), ==, 0x01); /* DRB7 */ |
| #endif |
| /* 3.2.20 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x68), ==, 0x00); /* FDHC */ |
| /* 3.2.21 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x70), ==, 0x00); /* MTT */ |
| #ifndef BROKEN |
| /* 3.2.22 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x71), ==, 0x10); /* CLT */ |
| #endif |
| /* 3.2.23 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x72), ==, 0x02); /* SMRAM */ |
| /* 3.2.24 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x90), ==, 0x00); /* ERRCMD */ |
| /* 3.2.25 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x91), ==, 0x00); /* ERRSTS */ |
| /* 3.2.26 */ |
| g_assert_cmpint(qpci_config_readb(dev, 0x93), ==, 0x00); /* TRC */ |
| |
| qtest_end(); |
| } |
| |
| #define PAM_RE 1 |
| #define PAM_WE 2 |
| |
| static void pam_set(QPCIDevice *dev, int index, int flags) |
| { |
| int regno = 0x59 + (index / 2); |
| uint8_t reg; |
| |
| reg = qpci_config_readb(dev, regno); |
| if (index & 1) { |
| reg = (reg & 0x0F) | (flags << 4); |
| } else { |
| reg = (reg & 0xF0) | flags; |
| } |
| qpci_config_writeb(dev, regno, reg); |
| } |
| |
| static gboolean verify_area(uint32_t start, uint32_t end, uint8_t value) |
| { |
| uint32_t size = end - start + 1; |
| gboolean ret = TRUE; |
| uint8_t *data; |
| int i; |
| |
| data = g_malloc0(size); |
| memread(start, data, size); |
| |
| g_test_message("verify_area: data[0] = 0x%x", data[0]); |
| |
| for (i = 0; i < size; i++) { |
| if (data[i] != value) { |
| ret = FALSE; |
| break; |
| } |
| } |
| |
| g_free(data); |
| |
| return ret; |
| } |
| |
| static void write_area(uint32_t start, uint32_t end, uint8_t value) |
| { |
| uint32_t size = end - start + 1; |
| uint8_t *data; |
| |
| data = g_malloc(size); |
| memset(data, value, size); |
| memwrite(start, data, size); |
| |
| g_free(data); |
| } |
| |
| static void test_i440fx_pam(gconstpointer opaque) |
| { |
| const TestData *s = opaque; |
| QPCIBus *bus; |
| QPCIDevice *dev; |
| int i; |
| static struct { |
| uint32_t start; |
| uint32_t end; |
| } pam_area[] = { |
| { 0, 0 }, /* Reserved */ |
| { 0xF0000, 0xFFFFF }, /* BIOS Area */ |
| { 0xC0000, 0xC3FFF }, /* Option ROM */ |
| { 0xC4000, 0xC7FFF }, /* Option ROM */ |
| { 0xC8000, 0xCBFFF }, /* Option ROM */ |
| { 0xCC000, 0xCFFFF }, /* Option ROM */ |
| { 0xD0000, 0xD3FFF }, /* Option ROM */ |
| { 0xD4000, 0xD7FFF }, /* Option ROM */ |
| { 0xD8000, 0xDBFFF }, /* Option ROM */ |
| { 0xDC000, 0xDFFFF }, /* Option ROM */ |
| { 0xE0000, 0xE3FFF }, /* BIOS Extension */ |
| { 0xE4000, 0xE7FFF }, /* BIOS Extension */ |
| { 0xE8000, 0xEBFFF }, /* BIOS Extension */ |
| { 0xEC000, 0xEFFFF }, /* BIOS Extension */ |
| }; |
| |
| bus = test_start_get_bus(s); |
| dev = qpci_device_find(bus, QPCI_DEVFN(0, 0)); |
| g_assert(dev != NULL); |
| |
| for (i = 0; i < ARRAY_SIZE(pam_area); i++) { |
| if (pam_area[i].start == pam_area[i].end) { |
| continue; |
| } |
| |
| g_test_message("Checking area 0x%05x..0x%05x", |
| pam_area[i].start, pam_area[i].end); |
| /* Switch to RE for the area */ |
| pam_set(dev, i, PAM_RE); |
| /* Verify the RAM is all zeros */ |
| g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0)); |
| |
| /* Switch to WE for the area */ |
| pam_set(dev, i, PAM_RE | PAM_WE); |
| /* Write out a non-zero mask to the full area */ |
| write_area(pam_area[i].start, pam_area[i].end, 0x42); |
| |
| #ifndef BROKEN |
| /* QEMU only supports a limited form of PAM */ |
| |
| /* Switch to !RE for the area */ |
| pam_set(dev, i, PAM_WE); |
| /* Verify the area is not our mask */ |
| g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x42)); |
| #endif |
| |
| /* Verify the area is our new mask */ |
| g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0x42)); |
| |
| /* Write out a new mask */ |
| write_area(pam_area[i].start, pam_area[i].end, 0x82); |
| |
| #ifndef BROKEN |
| /* QEMU only supports a limited form of PAM */ |
| |
| /* Verify the area is not our mask */ |
| g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x82)); |
| |
| /* Switch to RE for the area */ |
| pam_set(dev, i, PAM_RE | PAM_WE); |
| #endif |
| /* Verify the area is our new mask */ |
| g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0x82)); |
| |
| /* Reset area */ |
| pam_set(dev, i, 0); |
| |
| /* Verify the area is not our new mask */ |
| g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x82)); |
| } |
| qtest_end(); |
| } |
| |
| #define BLOB_SIZE ((size_t)65536) |
| #define ISA_BIOS_MAXSZ ((size_t)(128 * 1024)) |
| |
| /* Create a blob file, and return its absolute pathname as a dynamically |
| * allocated string. |
| * The file is closed before the function returns. |
| * In case of error, NULL is returned. The function prints the error message. |
| */ |
| static char *create_blob_file(void) |
| { |
| int ret, fd; |
| char *pathname; |
| GError *error = NULL; |
| |
| ret = -1; |
| fd = g_file_open_tmp("blob_XXXXXX", &pathname, &error); |
| if (fd == -1) { |
| fprintf(stderr, "unable to create blob file: %s\n", error->message); |
| g_error_free(error); |
| } else { |
| if (ftruncate(fd, BLOB_SIZE) == -1) { |
| fprintf(stderr, "ftruncate(\"%s\", %zu): %s\n", pathname, |
| BLOB_SIZE, strerror(errno)); |
| } else { |
| void *buf; |
| |
| buf = mmap(NULL, BLOB_SIZE, PROT_WRITE, MAP_SHARED, fd, 0); |
| if (buf == MAP_FAILED) { |
| fprintf(stderr, "mmap(\"%s\", %zu): %s\n", pathname, BLOB_SIZE, |
| strerror(errno)); |
| } else { |
| size_t i; |
| |
| for (i = 0; i < BLOB_SIZE; ++i) { |
| ((uint8_t *)buf)[i] = i; |
| } |
| munmap(buf, BLOB_SIZE); |
| ret = 0; |
| } |
| } |
| close(fd); |
| if (ret == -1) { |
| unlink(pathname); |
| g_free(pathname); |
| } |
| } |
| |
| return ret == -1 ? NULL : pathname; |
| } |
| |
| static void test_i440fx_firmware(FirmwareTestFixture *fixture, |
| gconstpointer user_data) |
| { |
| char *fw_pathname, *cmdline; |
| uint8_t *buf; |
| size_t i, isa_bios_size; |
| |
| fw_pathname = create_blob_file(); |
| g_assert(fw_pathname != NULL); |
| |
| /* Better hope the user didn't put metacharacters in TMPDIR and co. */ |
| cmdline = g_strdup_printf("-S %s%s", fixture->is_bios |
| ? "-bios " |
| : "-drive if=pflash,format=raw,file=", |
| fw_pathname); |
| g_test_message("qemu cmdline: %s", cmdline); |
| qtest_start(cmdline); |
| g_free(cmdline); |
| |
| /* QEMU has loaded the firmware (because qtest_start() only returns after |
| * the QMP handshake completes). We must unlink the firmware blob right |
| * here, because any assertion firing below would leak it in the |
| * filesystem. This is also the reason why we recreate the blob every time |
| * this function is invoked. |
| */ |
| unlink(fw_pathname); |
| g_free(fw_pathname); |
| |
| /* check below 4G */ |
| buf = g_malloc0(BLOB_SIZE); |
| memread(0x100000000ULL - BLOB_SIZE, buf, BLOB_SIZE); |
| for (i = 0; i < BLOB_SIZE; ++i) { |
| g_assert_cmphex(buf[i], ==, (uint8_t)i); |
| } |
| |
| /* check in ISA space too */ |
| memset(buf, 0, BLOB_SIZE); |
| isa_bios_size = ISA_BIOS_MAXSZ < BLOB_SIZE ? ISA_BIOS_MAXSZ : BLOB_SIZE; |
| memread(0x100000 - isa_bios_size, buf, isa_bios_size); |
| for (i = 0; i < isa_bios_size; ++i) { |
| g_assert_cmphex(buf[i], ==, |
| (uint8_t)((BLOB_SIZE - isa_bios_size) + i)); |
| } |
| |
| g_free(buf); |
| qtest_end(); |
| } |
| |
| static void add_firmware_test(const char *testpath, |
| void (*setup_fixture)(FirmwareTestFixture *f, |
| gconstpointer test_data)) |
| { |
| qtest_add(testpath, FirmwareTestFixture, NULL, setup_fixture, |
| test_i440fx_firmware, NULL); |
| } |
| |
| static void request_bios(FirmwareTestFixture *fixture, |
| gconstpointer user_data) |
| { |
| fixture->is_bios = true; |
| } |
| |
| static void request_pflash(FirmwareTestFixture *fixture, |
| gconstpointer user_data) |
| { |
| fixture->is_bios = false; |
| } |
| |
| int main(int argc, char **argv) |
| { |
| TestData data; |
| int ret; |
| |
| g_test_init(&argc, &argv, NULL); |
| |
| data.num_cpus = 1; |
| |
| qtest_add_data_func("i440fx/defaults", &data, test_i440fx_defaults); |
| qtest_add_data_func("i440fx/pam", &data, test_i440fx_pam); |
| add_firmware_test("i440fx/firmware/bios", request_bios); |
| add_firmware_test("i440fx/firmware/pflash", request_pflash); |
| |
| ret = g_test_run(); |
| return ret; |
| } |