| /* |
| * QTest testcase for Microbit board using the Nordic Semiconductor nRF51 SoC. |
| * |
| * nRF51: |
| * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf |
| * Product Spec: http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.1.pdf |
| * |
| * Microbit Board: http://microbit.org/ |
| * |
| * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de> |
| * |
| * This code is licensed under the GPL version 2 or later. See |
| * the COPYING file in the top-level directory. |
| */ |
| |
| |
| #include "qemu/osdep.h" |
| #include "exec/hwaddr.h" |
| #include "libqtest.h" |
| |
| #include "hw/arm/nrf51.h" |
| #include "hw/char/nrf51_uart.h" |
| #include "hw/gpio/nrf51_gpio.h" |
| #include "hw/nvram/nrf51_nvm.h" |
| #include "hw/timer/nrf51_timer.h" |
| #include "hw/i2c/microbit_i2c.h" |
| |
| static bool uart_wait_for_event(QTestState *qts, uint32_t event_addr) |
| { |
| time_t now, start = time(NULL); |
| |
| while (true) { |
| if (qtest_readl(qts, event_addr) == 1) { |
| qtest_writel(qts, event_addr, 0x00); |
| return true; |
| } |
| |
| /* Wait at most 10 minutes */ |
| now = time(NULL); |
| if (now - start > 600) { |
| break; |
| } |
| g_usleep(10000); |
| } |
| |
| return false; |
| } |
| |
| static void uart_rw_to_rxd(QTestState *qts, int sock_fd, const char *in, |
| char *out) |
| { |
| int i, in_len = strlen(in); |
| |
| g_assert_true(write(sock_fd, in, in_len) == in_len); |
| for (i = 0; i < in_len; i++) { |
| g_assert_true(uart_wait_for_event(qts, NRF51_UART_BASE + |
| A_UART_RXDRDY)); |
| out[i] = qtest_readl(qts, NRF51_UART_BASE + A_UART_RXD); |
| } |
| out[i] = '\0'; |
| } |
| |
| static void uart_w_to_txd(QTestState *qts, const char *in) |
| { |
| int i, in_len = strlen(in); |
| |
| for (i = 0; i < in_len; i++) { |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_TXD, in[i]); |
| g_assert_true(uart_wait_for_event(qts, NRF51_UART_BASE + |
| A_UART_TXDRDY)); |
| } |
| } |
| |
| static void test_nrf51_uart(void) |
| { |
| int sock_fd; |
| char s[10]; |
| QTestState *qts = qtest_init_with_serial("-M microbit", &sock_fd); |
| |
| g_assert_true(write(sock_fd, "c", 1) == 1); |
| g_assert_cmphex(qtest_readl(qts, NRF51_UART_BASE + A_UART_RXD), ==, 0x00); |
| |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_ENABLE, 0x04); |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_STARTRX, 0x01); |
| |
| g_assert_true(uart_wait_for_event(qts, NRF51_UART_BASE + A_UART_RXDRDY)); |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_RXDRDY, 0x00); |
| g_assert_cmphex(qtest_readl(qts, NRF51_UART_BASE + A_UART_RXD), ==, 'c'); |
| |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_INTENSET, 0x04); |
| g_assert_cmphex(qtest_readl(qts, NRF51_UART_BASE + A_UART_INTEN), ==, 0x04); |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_INTENCLR, 0x04); |
| g_assert_cmphex(qtest_readl(qts, NRF51_UART_BASE + A_UART_INTEN), ==, 0x00); |
| |
| uart_rw_to_rxd(qts, sock_fd, "hello", s); |
| g_assert_true(memcmp(s, "hello", 5) == 0); |
| |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_STARTTX, 0x01); |
| uart_w_to_txd(qts, "d"); |
| g_assert_true(read(sock_fd, s, 10) == 1); |
| g_assert_cmphex(s[0], ==, 'd'); |
| |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_SUSPEND, 0x01); |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_TXD, 'h'); |
| qtest_writel(qts, NRF51_UART_BASE + A_UART_STARTTX, 0x01); |
| uart_w_to_txd(qts, "world"); |
| g_assert_true(read(sock_fd, s, 10) == 5); |
| g_assert_true(memcmp(s, "world", 5) == 0); |
| |
| close(sock_fd); |
| |
| qtest_quit(qts); |
| } |
| |
| /* Read a byte from I2C device at @addr from register @reg */ |
| static uint32_t i2c_read_byte(QTestState *qts, uint32_t addr, uint32_t reg) |
| { |
| uint32_t val; |
| |
| qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_REG_ADDRESS, addr); |
| qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_TASK_STARTTX, 1); |
| qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_REG_TXD, reg); |
| val = qtest_readl(qts, NRF51_TWI_BASE + NRF51_TWI_EVENT_TXDSENT); |
| g_assert_cmpuint(val, ==, 1); |
| qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_TASK_STOP, 1); |
| |
| qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_TASK_STARTRX, 1); |
| val = qtest_readl(qts, NRF51_TWI_BASE + NRF51_TWI_EVENT_RXDREADY); |
| g_assert_cmpuint(val, ==, 1); |
| val = qtest_readl(qts, NRF51_TWI_BASE + NRF51_TWI_REG_RXD); |
| qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_TASK_STOP, 1); |
| |
| return val; |
| } |
| |
| static void test_microbit_i2c(void) |
| { |
| uint32_t val; |
| QTestState *qts = qtest_init("-M microbit"); |
| |
| /* We don't program pins/irqs but at least enable the device */ |
| qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_REG_ENABLE, 5); |
| |
| /* MMA8653 magnetometer detection */ |
| val = i2c_read_byte(qts, 0x3A, 0x0D); |
| g_assert_cmpuint(val, ==, 0x5A); |
| |
| val = i2c_read_byte(qts, 0x3A, 0x0D); |
| g_assert_cmpuint(val, ==, 0x5A); |
| |
| /* LSM303 accelerometer detection */ |
| val = i2c_read_byte(qts, 0x3C, 0x4F); |
| g_assert_cmpuint(val, ==, 0x40); |
| |
| qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_REG_ENABLE, 0); |
| |
| qtest_quit(qts); |
| } |
| |
| #define FLASH_SIZE (256 * NRF51_PAGE_SIZE) |
| |
| static void fill_and_erase(QTestState *qts, hwaddr base, hwaddr size, |
| uint32_t address_reg) |
| { |
| hwaddr i; |
| |
| /* Erase Page */ |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); |
| qtest_writel(qts, NRF51_NVMC_BASE + address_reg, base); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| |
| /* Check memory */ |
| for (i = 0; i < size / 4; i++) { |
| g_assert_cmpuint(qtest_readl(qts, base + i * 4), ==, 0xFFFFFFFF); |
| } |
| |
| /* Fill memory */ |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x01); |
| for (i = 0; i < size / 4; i++) { |
| qtest_writel(qts, base + i * 4, i); |
| g_assert_cmpuint(qtest_readl(qts, base + i * 4), ==, i); |
| } |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| } |
| |
| static void test_nrf51_nvmc(void) |
| { |
| uint32_t value; |
| hwaddr i; |
| QTestState *qts = qtest_init("-M microbit"); |
| |
| /* Test always ready */ |
| value = qtest_readl(qts, NRF51_NVMC_BASE + NRF51_NVMC_READY); |
| g_assert_cmpuint(value & 0x01, ==, 0x01); |
| |
| /* Test write-read config register */ |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x03); |
| g_assert_cmpuint(qtest_readl(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG), |
| ==, 0x03); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| g_assert_cmpuint(qtest_readl(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG), |
| ==, 0x00); |
| |
| /* Test PCR0 */ |
| fill_and_erase(qts, NRF51_FLASH_BASE, NRF51_PAGE_SIZE, |
| NRF51_NVMC_ERASEPCR0); |
| fill_and_erase(qts, NRF51_FLASH_BASE + NRF51_PAGE_SIZE, |
| NRF51_PAGE_SIZE, NRF51_NVMC_ERASEPCR0); |
| |
| /* Test PCR1 */ |
| fill_and_erase(qts, NRF51_FLASH_BASE, NRF51_PAGE_SIZE, |
| NRF51_NVMC_ERASEPCR1); |
| fill_and_erase(qts, NRF51_FLASH_BASE + NRF51_PAGE_SIZE, |
| NRF51_PAGE_SIZE, NRF51_NVMC_ERASEPCR1); |
| |
| /* Erase all */ |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_ERASEALL, 0x01); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x01); |
| for (i = 0; i < FLASH_SIZE / 4; i++) { |
| qtest_writel(qts, NRF51_FLASH_BASE + i * 4, i); |
| g_assert_cmpuint(qtest_readl(qts, NRF51_FLASH_BASE + i * 4), ==, i); |
| } |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_ERASEALL, 0x01); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| |
| for (i = 0; i < FLASH_SIZE / 4; i++) { |
| g_assert_cmpuint(qtest_readl(qts, NRF51_FLASH_BASE + i * 4), |
| ==, 0xFFFFFFFF); |
| } |
| |
| /* Erase UICR */ |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_ERASEUICR, 0x01); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| |
| for (i = 0; i < NRF51_UICR_SIZE / 4; i++) { |
| g_assert_cmpuint(qtest_readl(qts, NRF51_UICR_BASE + i * 4), |
| ==, 0xFFFFFFFF); |
| } |
| |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x01); |
| for (i = 0; i < NRF51_UICR_SIZE / 4; i++) { |
| qtest_writel(qts, NRF51_UICR_BASE + i * 4, i); |
| g_assert_cmpuint(qtest_readl(qts, NRF51_UICR_BASE + i * 4), ==, i); |
| } |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x02); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_ERASEUICR, 0x01); |
| qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x00); |
| |
| for (i = 0; i < NRF51_UICR_SIZE / 4; i++) { |
| g_assert_cmpuint(qtest_readl(qts, NRF51_UICR_BASE + i * 4), |
| ==, 0xFFFFFFFF); |
| } |
| |
| qtest_quit(qts); |
| } |
| |
| static void test_nrf51_gpio(void) |
| { |
| size_t i; |
| uint32_t actual, expected; |
| |
| struct { |
| hwaddr addr; |
| uint32_t expected; |
| } const reset_state[] = { |
| {NRF51_GPIO_REG_OUT, 0x00000000}, {NRF51_GPIO_REG_OUTSET, 0x00000000}, |
| {NRF51_GPIO_REG_OUTCLR, 0x00000000}, {NRF51_GPIO_REG_IN, 0x00000000}, |
| {NRF51_GPIO_REG_DIR, 0x00000000}, {NRF51_GPIO_REG_DIRSET, 0x00000000}, |
| {NRF51_GPIO_REG_DIRCLR, 0x00000000} |
| }; |
| |
| QTestState *qts = qtest_init("-M microbit"); |
| |
| /* Check reset state */ |
| for (i = 0; i < ARRAY_SIZE(reset_state); i++) { |
| expected = reset_state[i].expected; |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + reset_state[i].addr); |
| g_assert_cmpuint(actual, ==, expected); |
| } |
| |
| for (i = 0; i < NRF51_GPIO_PINS; i++) { |
| expected = 0x00000002; |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + |
| NRF51_GPIO_REG_CNF_START + i * 4); |
| g_assert_cmpuint(actual, ==, expected); |
| } |
| |
| /* Check dir bit consistency between dir and cnf */ |
| /* Check set via DIRSET */ |
| expected = 0x80000001; |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRSET, expected); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR); |
| g_assert_cmpuint(actual, ==, expected); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) |
| & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| |
| /* Check clear via DIRCLR */ |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRCLR, 0x80000001); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR); |
| g_assert_cmpuint(actual, ==, 0x00000000); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) |
| & 0x01; |
| g_assert_cmpuint(actual, ==, 0x00); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x00); |
| |
| /* Check set via DIR */ |
| expected = 0x80000001; |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, expected); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR); |
| g_assert_cmpuint(actual, ==, expected); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) |
| & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| |
| /* Reset DIR */ |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, 0x00000000); |
| |
| /* Check Input propagates */ |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x00); |
| qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 0); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x00); |
| qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 1); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, -1); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02); |
| |
| /* Check pull-up working */ |
| qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 0); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x00); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b1110); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02); |
| |
| /* Check pull-down working */ |
| qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 1); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0110); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x00); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02); |
| qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, -1); |
| |
| /* Check Output propagates */ |
| qtest_irq_intercept_out(qts, "/machine/nrf51"); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0011); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01); |
| g_assert_true(qtest_get_irq(qts, 0)); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01); |
| g_assert_false(qtest_get_irq(qts, 0)); |
| |
| /* Check self-stimulation */ |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x01); |
| |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01); |
| actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01; |
| g_assert_cmpuint(actual, ==, 0x00); |
| |
| /* |
| * Check short-circuit - generates an guest_error which must be checked |
| * manually as long as qtest can not scan qemu_log messages |
| */ |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01); |
| qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01); |
| qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 0); |
| |
| qtest_quit(qts); |
| } |
| |
| static void timer_task(QTestState *qts, hwaddr task) |
| { |
| qtest_writel(qts, NRF51_TIMER_BASE + task, NRF51_TRIGGER_TASK); |
| } |
| |
| static void timer_clear_event(QTestState *qts, hwaddr event) |
| { |
| qtest_writel(qts, NRF51_TIMER_BASE + event, NRF51_EVENT_CLEAR); |
| } |
| |
| static void timer_set_bitmode(QTestState *qts, uint8_t mode) |
| { |
| qtest_writel(qts, NRF51_TIMER_BASE + NRF51_TIMER_REG_BITMODE, mode); |
| } |
| |
| static void timer_set_prescaler(QTestState *qts, uint8_t prescaler) |
| { |
| qtest_writel(qts, NRF51_TIMER_BASE + NRF51_TIMER_REG_PRESCALER, prescaler); |
| } |
| |
| static void timer_set_cc(QTestState *qts, size_t idx, uint32_t value) |
| { |
| qtest_writel(qts, NRF51_TIMER_BASE + NRF51_TIMER_REG_CC0 + idx * 4, value); |
| } |
| |
| static void timer_assert_events(QTestState *qts, uint32_t ev0, uint32_t ev1, |
| uint32_t ev2, uint32_t ev3) |
| { |
| g_assert(qtest_readl(qts, NRF51_TIMER_BASE + NRF51_TIMER_EVENT_COMPARE_0) |
| == ev0); |
| g_assert(qtest_readl(qts, NRF51_TIMER_BASE + NRF51_TIMER_EVENT_COMPARE_1) |
| == ev1); |
| g_assert(qtest_readl(qts, NRF51_TIMER_BASE + NRF51_TIMER_EVENT_COMPARE_2) |
| == ev2); |
| g_assert(qtest_readl(qts, NRF51_TIMER_BASE + NRF51_TIMER_EVENT_COMPARE_3) |
| == ev3); |
| } |
| |
| static void test_nrf51_timer(void) |
| { |
| uint32_t steps_to_overflow = 408; |
| QTestState *qts = qtest_init("-M microbit"); |
| |
| /* Compare Match */ |
| timer_task(qts, NRF51_TIMER_TASK_STOP); |
| timer_task(qts, NRF51_TIMER_TASK_CLEAR); |
| |
| timer_clear_event(qts, NRF51_TIMER_EVENT_COMPARE_0); |
| timer_clear_event(qts, NRF51_TIMER_EVENT_COMPARE_1); |
| timer_clear_event(qts, NRF51_TIMER_EVENT_COMPARE_2); |
| timer_clear_event(qts, NRF51_TIMER_EVENT_COMPARE_3); |
| |
| timer_set_bitmode(qts, NRF51_TIMER_WIDTH_16); /* 16 MHz Timer */ |
| timer_set_prescaler(qts, 0); |
| /* Swept over in first step */ |
| timer_set_cc(qts, 0, 2); |
| /* Barely miss on first step */ |
| timer_set_cc(qts, 1, 162); |
| /* Spot on on third step */ |
| timer_set_cc(qts, 2, 480); |
| |
| timer_assert_events(qts, 0, 0, 0, 0); |
| |
| timer_task(qts, NRF51_TIMER_TASK_START); |
| qtest_clock_step(qts, 10000); |
| timer_assert_events(qts, 1, 0, 0, 0); |
| |
| /* Swept over on first overflow */ |
| timer_set_cc(qts, 3, 114); |
| |
| qtest_clock_step(qts, 10000); |
| timer_assert_events(qts, 1, 1, 0, 0); |
| |
| qtest_clock_step(qts, 10000); |
| timer_assert_events(qts, 1, 1, 1, 0); |
| |
| /* Wrap time until internal counter overflows */ |
| while (steps_to_overflow--) { |
| timer_assert_events(qts, 1, 1, 1, 0); |
| qtest_clock_step(qts, 10000); |
| } |
| |
| timer_assert_events(qts, 1, 1, 1, 1); |
| |
| timer_clear_event(qts, NRF51_TIMER_EVENT_COMPARE_0); |
| timer_clear_event(qts, NRF51_TIMER_EVENT_COMPARE_1); |
| timer_clear_event(qts, NRF51_TIMER_EVENT_COMPARE_2); |
| timer_clear_event(qts, NRF51_TIMER_EVENT_COMPARE_3); |
| timer_assert_events(qts, 0, 0, 0, 0); |
| |
| timer_task(qts, NRF51_TIMER_TASK_STOP); |
| |
| /* Test Proposal: Stop/Shutdown */ |
| /* Test Proposal: Shortcut Compare -> Clear */ |
| /* Test Proposal: Shortcut Compare -> Stop */ |
| /* Test Proposal: Counter Mode */ |
| |
| qtest_quit(qts); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| g_test_init(&argc, &argv, NULL); |
| |
| qtest_add_func("/microbit/nrf51/uart", test_nrf51_uart); |
| qtest_add_func("/microbit/nrf51/gpio", test_nrf51_gpio); |
| qtest_add_func("/microbit/nrf51/nvmc", test_nrf51_nvmc); |
| qtest_add_func("/microbit/nrf51/timer", test_nrf51_timer); |
| qtest_add_func("/microbit/microbit/i2c", test_microbit_i2c); |
| |
| return g_test_run(); |
| } |