| /* |
| * SPDX-License-Identifier: BSD-2-Clause |
| * |
| * Copyright (c) 2022 Andes Technology Corporation |
| * |
| * Authors: |
| * Yu Chien Peter Lin <peterlin@andestech.com> |
| */ |
| |
| #include <platform_override.h> |
| #include <andes/andes_pmu.h> |
| #include <sbi_utils/fdt/fdt_helper.h> |
| #include <sbi_utils/fdt/fdt_fixup.h> |
| #include <sbi_utils/sys/atcsmu.h> |
| #include <sbi/riscv_asm.h> |
| #include <sbi/sbi_bitops.h> |
| #include <sbi/sbi_error.h> |
| #include <sbi/sbi_hsm.h> |
| #include <sbi/sbi_ipi.h> |
| #include <sbi/sbi_init.h> |
| #include <andes/andes.h> |
| |
| static struct smu_data smu = { 0 }; |
| extern void __ae350_enable_coherency_warmboot(void); |
| extern void __ae350_disable_coherency(void); |
| |
| static int ae350_hart_start(u32 hartid, ulong saddr) |
| { |
| /* |
| * Don't send wakeup command when: |
| * 1) boot-time |
| * 2) the target hart is non-sleepable 25-series hart0 |
| */ |
| if (!sbi_init_count(hartid) || (is_andes(25) && hartid == 0)) |
| return sbi_ipi_raw_send(sbi_hartid_to_hartindex(hartid)); |
| |
| /* Write wakeup command to the sleep hart */ |
| smu_set_command(&smu, WAKEUP_CMD, hartid); |
| |
| return 0; |
| } |
| |
| static int ae350_hart_stop(void) |
| { |
| int rc; |
| u32 hartid = current_hartid(); |
| |
| /** |
| * For Andes AX25MP, the hart0 shares power domain with |
| * L2-cache, instead of turning it off, it should fall |
| * through and jump to warmboot_addr. |
| */ |
| if (is_andes(25) && hartid == 0) |
| return SBI_ENOTSUPP; |
| |
| if (!smu_support_sleep_mode(&smu, DEEPSLEEP_MODE, hartid)) |
| return SBI_ENOTSUPP; |
| |
| /** |
| * disable all events, the current hart will be |
| * woken up from reset vector when other hart |
| * writes its PCS (power control slot) control |
| * register |
| */ |
| smu_set_wakeup_events(&smu, 0x0, hartid); |
| smu_set_command(&smu, DEEP_SLEEP_CMD, hartid); |
| |
| rc = smu_set_reset_vector(&smu, |
| (ulong)__ae350_enable_coherency_warmboot, |
| hartid); |
| if (rc) |
| goto fail; |
| |
| __ae350_disable_coherency(); |
| |
| wfi(); |
| |
| fail: |
| /* It should never reach here */ |
| sbi_hart_hang(); |
| return 0; |
| } |
| |
| static const struct sbi_hsm_device andes_smu = { |
| .name = "andes_smu", |
| .hart_start = ae350_hart_start, |
| .hart_stop = ae350_hart_stop, |
| }; |
| |
| static void ae350_hsm_device_init(void) |
| { |
| int rc; |
| void *fdt; |
| |
| fdt = fdt_get_address(); |
| |
| rc = fdt_parse_compat_addr(fdt, (uint64_t *)&smu.addr, |
| "andestech,atcsmu"); |
| |
| if (!rc) { |
| sbi_hsm_set_device(&andes_smu); |
| } |
| } |
| |
| static int ae350_final_init(bool cold_boot, const struct fdt_match *match) |
| { |
| if (cold_boot) |
| ae350_hsm_device_init(); |
| |
| return 0; |
| } |
| |
| static const struct fdt_match andes_ae350_match[] = { |
| { .compatible = "andestech,ae350" }, |
| { }, |
| }; |
| |
| const struct platform_override andes_ae350 = { |
| .match_table = andes_ae350_match, |
| .final_init = ae350_final_init, |
| .extensions_init = andes_pmu_extensions_init, |
| .pmu_init = andes_pmu_init, |
| }; |