| #ifndef _LINUX_SCSI_H |
| #define _LINUX_SCSI_H |
| |
| /* |
| * This header file contains public constants and structures used by |
| * the scsi code for linux. |
| */ |
| |
| /* |
| $Header: /usr/src/linux/include/linux/RCS/scsi.h,v 1.3 1993/09/24 12:20:33 drew Exp $ |
| |
| For documentation on the OPCODES, MESSAGES, and SENSE values, |
| please consult the SCSI standard. |
| |
| */ |
| |
| /* |
| * SCSI opcodes |
| */ |
| |
| #define TEST_UNIT_READY 0x00 |
| #define REZERO_UNIT 0x01 |
| #define REQUEST_SENSE 0x03 |
| #define FORMAT_UNIT 0x04 |
| #define READ_BLOCK_LIMITS 0x05 |
| #define REASSIGN_BLOCKS 0x07 |
| #define READ_6 0x08 |
| #define WRITE_6 0x0a |
| #define SEEK_6 0x0b |
| #define READ_REVERSE 0x0f |
| #define WRITE_FILEMARKS 0x10 |
| #define SPACE 0x11 |
| #define INQUIRY 0x12 |
| #define RECOVER_BUFFERED_DATA 0x14 |
| #define MODE_SELECT 0x15 |
| #define RESERVE 0x16 |
| #define RELEASE 0x17 |
| #define COPY 0x18 |
| #define ERASE 0x19 |
| #define MODE_SENSE 0x1a |
| #define START_STOP 0x1b |
| #define RECEIVE_DIAGNOSTIC 0x1c |
| #define SEND_DIAGNOSTIC 0x1d |
| #define ALLOW_MEDIUM_REMOVAL 0x1e |
| |
| #define SET_WINDOW 0x24 |
| #define READ_CAPACITY 0x25 |
| #define READ_10 0x28 |
| #define WRITE_10 0x2a |
| #define SEEK_10 0x2b |
| #define WRITE_VERIFY 0x2e |
| #define VERIFY 0x2f |
| #define SEARCH_HIGH 0x30 |
| #define SEARCH_EQUAL 0x31 |
| #define SEARCH_LOW 0x32 |
| #define SET_LIMITS 0x33 |
| #define PRE_FETCH 0x34 |
| #define READ_POSITION 0x34 |
| #define SYNCHRONIZE_CACHE 0x35 |
| #define LOCK_UNLOCK_CACHE 0x36 |
| #define READ_DEFECT_DATA 0x37 |
| #define MEDIUM_SCAN 0x38 |
| #define COMPARE 0x39 |
| #define COPY_VERIFY 0x3a |
| #define WRITE_BUFFER 0x3b |
| #define READ_BUFFER 0x3c |
| #define UPDATE_BLOCK 0x3d |
| #define READ_LONG 0x3e |
| #define WRITE_LONG 0x3f |
| #define CHANGE_DEFINITION 0x40 |
| #define WRITE_SAME 0x41 |
| #define READ_TOC 0x43 |
| #define LOG_SELECT 0x4c |
| #define LOG_SENSE 0x4d |
| #define MODE_SELECT_10 0x55 |
| #define RESERVE_10 0x56 |
| #define RELEASE_10 0x57 |
| #define MODE_SENSE_10 0x5a |
| #define PERSISTENT_RESERVE_IN 0x5e |
| #define PERSISTENT_RESERVE_OUT 0x5f |
| #define REPORT_LUNS 0xa0 |
| #define MOVE_MEDIUM 0xa5 |
| #define READ_12 0xa8 |
| #define WRITE_12 0xaa |
| #define WRITE_VERIFY_12 0xae |
| #define SEARCH_HIGH_12 0xb0 |
| #define SEARCH_EQUAL_12 0xb1 |
| #define SEARCH_LOW_12 0xb2 |
| #define READ_ELEMENT_STATUS 0xb8 |
| #define SEND_VOLUME_TAG 0xb6 |
| #define WRITE_LONG_2 0xea |
| #define READ_16 0x88 |
| #define WRITE_16 0x8a |
| #define VERIFY_16 0x8f |
| #define SERVICE_ACTION_IN 0x9e |
| /* values for service action in */ |
| #define SAI_READ_CAPACITY_16 0x10 |
| |
| #define SCSI_RETRY_10(c) ((c) == READ_6 || (c) == WRITE_6 || (c) == SEEK_6) |
| |
| /* |
| * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft |
| * T10/1561-D Revision 4 Draft dated 7th November 2002. |
| */ |
| #define SAM_STAT_GOOD 0x00 |
| #define SAM_STAT_CHECK_CONDITION 0x02 |
| #define SAM_STAT_CONDITION_MET 0x04 |
| #define SAM_STAT_BUSY 0x08 |
| #define SAM_STAT_INTERMEDIATE 0x10 |
| #define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14 |
| #define SAM_STAT_RESERVATION_CONFLICT 0x18 |
| #define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */ |
| #define SAM_STAT_TASK_SET_FULL 0x28 |
| #define SAM_STAT_ACA_ACTIVE 0x30 |
| #define SAM_STAT_TASK_ABORTED 0x40 |
| |
| /* |
| * Status codes |
| */ |
| |
| #define GOOD 0x00 |
| #define CHECK_CONDITION 0x01 |
| #define CONDITION_GOOD 0x02 |
| #define BUSY 0x04 |
| #define INTERMEDIATE_GOOD 0x08 |
| #define INTERMEDIATE_C_GOOD 0x0a |
| #define RESERVATION_CONFLICT 0x0c |
| #define COMMAND_TERMINATED 0x11 |
| #define QUEUE_FULL 0x14 |
| |
| #define STATUS_MASK 0x3e |
| |
| /* |
| * SENSE KEYS |
| */ |
| |
| #define NO_SENSE 0x00 |
| #define RECOVERED_ERROR 0x01 |
| #define NOT_READY 0x02 |
| #define MEDIUM_ERROR 0x03 |
| #define HARDWARE_ERROR 0x04 |
| #define ILLEGAL_REQUEST 0x05 |
| #define UNIT_ATTENTION 0x06 |
| #define DATA_PROTECT 0x07 |
| #define BLANK_CHECK 0x08 |
| #define COPY_ABORTED 0x0a |
| #define ABORTED_COMMAND 0x0b |
| #define VOLUME_OVERFLOW 0x0d |
| #define MISCOMPARE 0x0e |
| |
| |
| /* |
| * DEVICE TYPES |
| */ |
| |
| #define TYPE_DISK 0x00 |
| #define TYPE_TAPE 0x01 |
| #define TYPE_PRINTER 0x02 |
| #define TYPE_PROCESSOR 0x03 /* HP scanners use this */ |
| #define TYPE_WORM 0x04 /* Treated as ROM by our system */ |
| #define TYPE_ROM 0x05 |
| #define TYPE_SCANNER 0x06 |
| #define TYPE_MOD 0x07 /* Magneto-optical disk - |
| * - treated as TYPE_DISK */ |
| #define TYPE_MEDIUM_CHANGER 0x08 |
| #define TYPE_COMM 0x09 /* Communications device */ |
| #define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ |
| #define TYPE_NO_LUN 0x7f |
| |
| /* |
| * standard mode-select header prepended to all mode-select commands |
| * |
| * moved here from cdrom.h -- kraxel |
| */ |
| |
| struct ccs_modesel_head |
| { |
| uint8_t _r1; /* reserved */ |
| uint8_t medium; /* device-specific medium type */ |
| uint8_t _r2; /* reserved */ |
| uint8_t block_desc_length; /* block descriptor length */ |
| uint8_t density; /* device-specific density code */ |
| uint8_t number_blocks_hi; /* number of blocks in this block desc */ |
| uint8_t number_blocks_med; |
| uint8_t number_blocks_lo; |
| uint8_t _r3; |
| uint8_t block_length_hi; /* block length for blocks in this desc */ |
| uint8_t block_length_med; |
| uint8_t block_length_lo; |
| }; |
| |
| /* |
| * MESSAGE CODES |
| */ |
| |
| #define COMMAND_COMPLETE 0x00 |
| #define EXTENDED_MESSAGE 0x01 |
| #define EXTENDED_MODIFY_DATA_POINTER 0x00 |
| #define EXTENDED_SDTR 0x01 |
| #define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */ |
| #define EXTENDED_WDTR 0x03 |
| #define SAVE_POINTERS 0x02 |
| #define RESTORE_POINTERS 0x03 |
| #define DISCONNECT 0x04 |
| #define INITIATOR_ERROR 0x05 |
| #define ABORT 0x06 |
| #define MESSAGE_REJECT 0x07 |
| #define NOP 0x08 |
| #define MSG_PARITY_ERROR 0x09 |
| #define LINKED_CMD_COMPLETE 0x0a |
| #define LINKED_FLG_CMD_COMPLETE 0x0b |
| #define BUS_DEVICE_RESET 0x0c |
| |
| #define INITIATE_RECOVERY 0x0f /* SCSI-II only */ |
| #define RELEASE_RECOVERY 0x10 /* SCSI-II only */ |
| |
| #define SIMPLE_QUEUE_TAG 0x20 |
| #define HEAD_OF_QUEUE_TAG 0x21 |
| #define ORDERED_QUEUE_TAG 0x22 |
| |
| /* |
| * Here are some scsi specific ioctl commands which are sometimes useful. |
| */ |
| /* These are a few other constants only used by scsi devices */ |
| /* Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395 */ |
| |
| #define SCSI_IOCTL_GET_IDLUN 0x5382 /* conflicts with CDROMAUDIOBUFSIZ */ |
| |
| /* Used to turn on and off tagged queuing for scsi devices */ |
| |
| #define SCSI_IOCTL_TAGGED_ENABLE 0x5383 |
| #define SCSI_IOCTL_TAGGED_DISABLE 0x5384 |
| |
| /* Used to obtain the host number of a device. */ |
| #define SCSI_IOCTL_PROBE_HOST 0x5385 |
| |
| /* Used to get the bus number for a device */ |
| #define SCSI_IOCTL_GET_BUS_NUMBER 0x5386 |
| |
| /* Used to get the PCI location of a device */ |
| #define SCSI_IOCTL_GET_PCI 0x5387 |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * Emacs will notice this stuff at the end of the file and automatically |
| * adjust the settings for this buffer only. This must remain at the end |
| * of the file. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-indent-level: 4 |
| * c-brace-imaginary-offset: 0 |
| * c-brace-offset: -4 |
| * c-argdecl-indent: 4 |
| * c-label-offset: -4 |
| * c-continued-statement-offset: 4 |
| * c-continued-brace-offset: 0 |
| * indent-tabs-mode: nil |
| * tab-width: 8 |
| * End: |
| */ |
| |
| #endif |
