| /* |
| * context switching |
| * 2003-10 by SONE Takeshi |
| * |
| * Residual data portions: |
| * Copyright (c) 2004-2005 Jocelyn Mayer |
| */ |
| |
| #include "config.h" |
| #include "kernel/kernel.h" |
| #include "context.h" |
| #include "arch/ppc/processor.h" |
| #include "arch/ppc/residual.h" |
| #include "drivers/drivers.h" |
| #include "libopenbios/bindings.h" |
| #include "libopenbios/ofmem.h" |
| #include "libopenbios/initprogram.h" |
| #include "libopenbios/sys_info.h" |
| #include "arch/ppc/processor.h" |
| |
| #define MAIN_STACK_SIZE 16384 |
| #define IMAGE_STACK_SIZE 4096*2 |
| |
| #define debug printk |
| |
| #ifdef CONFIG_PPC_64BITSUPPORT |
| #ifdef __powerpc64__ |
| #define ULONG_SIZE 8 |
| #define STACKFRAME_MINSIZE 48 |
| #define STKOFF STACKFRAME_MINSIZE |
| #define SAVE_SPACE 320 |
| #else |
| #define ULONG_SIZE 4 |
| #define STACKFRAME_MINSIZE 16 |
| #define STKOFF 8 |
| #define SAVE_SPACE 144 |
| #endif |
| #endif |
| |
| static void start_main(void); /* forward decl. */ |
| void __exit_context(void); /* assembly routine */ |
| |
| void entry(void); |
| void of_client_callback(void); |
| |
| /* |
| * Main context structure |
| * It is placed at the bottom of our stack, and loaded by assembly routine |
| * to start us up. |
| */ |
| static struct context main_ctx = { |
| .pc = (unsigned long) start_main, |
| .return_addr = (unsigned long) __exit_context, |
| }; |
| |
| /* This is used by assembly routine to load/store the context which |
| * it is to switch/switched. */ |
| struct context * volatile __context = &main_ctx; |
| |
| /* Client program context */ |
| static struct context *client_ctx; |
| |
| /* Stack for loaded ELF image */ |
| static uint8_t image_stack[IMAGE_STACK_SIZE]; |
| |
| /* Pointer to startup context (physical address) */ |
| unsigned long __boot_ctx; |
| |
| /* |
| * Main starter |
| * This is the C function that runs first. |
| */ |
| static void start_main(void) |
| { |
| /* Save startup context, so we can refer to it later. |
| * We have to keep it in physical address since we will relocate. */ |
| __boot_ctx = virt_to_phys(__context); |
| |
| /* Set up client context */ |
| client_ctx = init_context(image_stack, sizeof image_stack, 1); |
| __context = client_ctx; |
| |
| /* Start the real fun */ |
| entry(); |
| |
| /* Returning from here should jump to __exit_context */ |
| __context = boot_ctx; |
| } |
| |
| /* Setup a new context using the given stack. |
| */ |
| struct context * |
| init_context(uint8_t *stack, uint32_t stack_size, int num_params) |
| { |
| struct context *ctx; |
| |
| ctx = (struct context *) |
| (stack + stack_size - (sizeof(*ctx) + num_params*sizeof(unsigned long))); |
| memset(ctx, 0, sizeof(*ctx)); |
| |
| /* Fill in reasonable default for flat memory model */ |
| ctx->sp = virt_to_phys(SP_LOC(ctx)); |
| ctx->return_addr = virt_to_phys(__exit_context); |
| |
| return ctx; |
| } |
| |
| |
| /* Build PReP residual data */ |
| static void * |
| residual_build(uint32_t memsize, uint32_t load_base, uint32_t load_size) |
| { |
| residual_t *res; |
| const unsigned char model[] = "IBM PPS Model 6015\0"; |
| int i; |
| |
| res = malloc(sizeof(residual_t)); |
| if (res == NULL) { |
| return NULL; |
| } |
| |
| res->length = sizeof(residual_t); |
| res->version = 1; |
| res->revision = 0; |
| memcpy(res->vital.model, model, sizeof(model)); |
| res->vital.version = 1; |
| res->vital.revision = 0; |
| res->vital.firmware = 0x1D1; |
| res->vital.NVRAM_size = 0x2000; |
| res->vital.nSIMMslots = 1; |
| res->vital.nISAslots = 0; |
| res->vital.nPCIslots = 0; |
| res->vital.nPCMCIAslots = 0; |
| res->vital.nMCAslots = 0; |
| res->vital.nEISAslots = 0; |
| res->vital.CPUHz = 200 * 1000 * 1000; |
| res->vital.busHz = 100 * 1000 * 1000; |
| res->vital.PCIHz = 33 * 1000 * 1000; |
| res->vital.TBdiv = 1000; |
| res->vital.wwidth = 32; |
| res->vital.page_size = 4096; |
| res->vital.ChBlocSize = 32; |
| res->vital.GrSize = 32; |
| res->vital.cache_size = 0; |
| res->vital.cache_type = 0; /* No cache */ |
| res->vital.cache_assoc = 8; /* Same as 601 */ |
| res->vital.cache_lnsize = 32; |
| res->vital.Icache_size = 0; |
| res->vital.Icache_assoc = 8; |
| res->vital.Icache_lnsize = 32; |
| res->vital.Dcache_size = 0; |
| res->vital.Dcache_assoc = 8; |
| res->vital.Dcache_lnsize = 32; |
| res->vital.TLB_size = 0; |
| res->vital.TLB_type = 0; /* None */ |
| res->vital.TLB_assoc = 2; |
| res->vital.ITLB_size = 0; |
| res->vital.ITLB_assoc = 2; |
| res->vital.DTLB_size = 0; |
| res->vital.DTLB_assoc = 2; |
| res->vital.ext_vital = NULL; |
| res->nCPUs = 1; |
| res->CPUs[0].pvr = mfpvr(); |
| res->CPUs[0].serial = 0; |
| res->CPUs[0].L2_size = 0; |
| res->CPUs[0].L2_assoc = 8; |
| /* Memory infos */ |
| res->max_mem = memsize; |
| res->good_mem = memsize; |
| /* Memory mappings */ |
| /* First segment: firmware */ |
| res->maps[0].usage = 0x0007; |
| res->maps[0].base = 0xfff00000; |
| res->maps[0].count = 0x00100000 >> 12; |
| i = 1; |
| /* Boot image */ |
| load_size = (load_size + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1); |
| res->maps[i].usage = 0x0008; |
| res->maps[i].base = load_base >> 12; |
| res->maps[i].count = load_size >> 12; |
| i++; |
| /* Free memory */ |
| res->maps[i].usage = 0x0010; |
| res->maps[i].base = (load_base + load_size) >> 12; |
| res->maps[i].count = (memsize >> 12) - res->maps[i].base; |
| i++; |
| /* ISA IO region : 8MB */ |
| res->maps[i].usage = 0x0040; |
| res->maps[i].base = 0x80000000 >> 12; |
| res->maps[i].count = 0x00800000 >> 12; |
| i++; |
| /* System registers : 8MB */ |
| res->maps[i].usage = 0x0200; |
| res->maps[i].base = 0xBF800000 >> 12; |
| res->maps[i].count = 0x00800000 >> 12; |
| i++; |
| /* System ROM : 64 kB */ |
| res->maps[i].usage = 0x2000; |
| res->maps[i].base = 0xFFFF0000 >> 12; |
| res->maps[i].count = 0x00010000 >> 12; |
| i++; |
| res->nmaps = i; |
| /* Memory SIMMs */ |
| res->nmems = 1; |
| res->memories[0].size = memsize; |
| /* Describe no devices */ |
| res->ndevices = 0; |
| |
| return res; |
| } |
| |
| /* init-program */ |
| int |
| arch_init_program(void) |
| { |
| volatile struct context *ctx = __context; |
| ucell entry, param, loadbase, loadsize; |
| ofmem_t *ofmem = ofmem_arch_get_private(); |
| |
| /* According to IEEE 1275, PPC bindings: |
| * |
| * MSR = FP, ME + (DR|IR) |
| * r1 = stack (32 K + 32 bytes link area above) |
| * r5 = client interface handler |
| * r6 = address of client program arguments (unused) |
| * r7 = length of client program arguments (unused) |
| * |
| * Yaboot and Linux use r3 and r4 for initrd address and size |
| * PReP machines use r3 and r4 for residual data and load image |
| */ |
| |
| ctx->regs[REG_R5] = (unsigned long)of_client_callback; |
| ctx->regs[REG_R6] = 0; |
| ctx->regs[REG_R7] = 0; |
| |
| /* Override the stack in the default context: the OpenBSD bootloader |
| fails soon after setting up virt to phys mappings with the default |
| stack. My best guess is that this is because the malloc() heap |
| doesn't have a 1:1 virt to phys mapping. So for the moment we use |
| the original (pre-context) location just under the MMU hash table |
| (SDR1) which is mapped 1:1 and makes the bootloader happy. */ |
| ctx->sp = mfsdr1() - 32768 - 65536; |
| |
| /* Set param */ |
| feval("load-state >ls.param @"); |
| param = POP(); |
| ctx->param[0] = param; |
| |
| /* Set entry point */ |
| feval("load-state >ls.entry @"); |
| entry = POP(); |
| ctx->pc = entry; |
| |
| /* Residual data for PReP */ |
| if (!is_apple()) { |
| fword("load-base"); |
| loadbase = POP(); |
| fword("load-size"); |
| loadsize = POP(); |
| |
| ctx->regs[REG_R3] = (uintptr_t)residual_build((uint32_t)ofmem->ramsize, |
| loadbase, loadsize); |
| ctx->regs[REG_R4] = loadbase; |
| } |
| |
| return 0; |
| } |
| |
| /* Switch to another context. */ |
| struct context *switch_to(struct context *ctx) |
| { |
| volatile struct context *save; |
| struct context *ret; |
| unsigned int lr; |
| |
| debug("switching to new context:\n"); |
| save = __context; |
| __context = ctx; |
| |
| asm __volatile__ ("mflr %%r9\n\t" |
| "stw %%r9, %0\n\t" |
| "bl __switch_context\n\t" |
| "lwz %%r9, %0\n\t" |
| "mtlr %%r9\n\t" : "=m" (lr) : "m" (lr) : "%r9" ); |
| |
| ret = __context; |
| __context = (struct context *)save; |
| return ret; |
| } |
| |
| /* Start ELF Boot image */ |
| unsigned int start_elf(void) |
| { |
| volatile struct context *ctx = __context; |
| |
| ctx = switch_to((struct context *)ctx); |
| return ctx->regs[REG_R3]; |
| } |