| /* |
| * Copyright (c) 2020 Nutanix Inc. All rights reserved. |
| * |
| * Authors: Thanos Makatos <thanos@nutanix.com> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Nutanix nor the names of its contributors may be |
| * used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| * |
| */ |
| |
| #include <stdio.h> |
| #include <sys/socket.h> |
| #include <sys/un.h> |
| #include <stdlib.h> |
| #include <stdarg.h> |
| #include <errno.h> |
| #include <sys/mman.h> |
| #include <sys/eventfd.h> |
| #include <time.h> |
| #include <err.h> |
| #include <assert.h> |
| #include <sys/stat.h> |
| #include <libgen.h> |
| #include <pthread.h> |
| #include <linux/limits.h> |
| |
| #include "common.h" |
| #include "libvfio-user.h" |
| #include "rte_hash_crc.h" |
| #include "tran_sock.h" |
| |
| #define CLIENT_MAX_FDS (32) |
| |
| /* This is low, so we get testing of vfu_dma_read/write() chunking. */ |
| #define CLIENT_MAX_DATA_XFER_SIZE (1024) |
| |
| static char *irq_to_str[] = { |
| [VFU_DEV_INTX_IRQ] = "INTx", |
| [VFU_DEV_MSI_IRQ] = "MSI", |
| [VFU_DEV_MSIX_IRQ] = "MSI-X", |
| [VFU_DEV_ERR_IRQ] = "ERR", |
| [VFU_DEV_REQ_IRQ] = "REQ" |
| }; |
| |
| void |
| vfu_log(UNUSED vfu_ctx_t *vfu_ctx, UNUSED int level, |
| const char *fmt, ...) |
| { |
| va_list ap; |
| |
| printf("client: "); |
| |
| va_start(ap, fmt); |
| vprintf(fmt, ap); |
| va_end(ap); |
| } |
| |
| static int |
| init_sock(const char *path) |
| { |
| int ret, sock; |
| struct sockaddr_un addr = {.sun_family = AF_UNIX}; |
| |
| /* TODO path should be defined elsewhere */ |
| ret = snprintf(addr.sun_path, sizeof(addr.sun_path), "%s", path); |
| |
| if ((sock = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) { |
| err(EXIT_FAILURE, "failed to open socket %s", path); |
| } |
| |
| if ((ret = connect(sock, (struct sockaddr*)&addr, sizeof(addr))) == -1) { |
| err(EXIT_FAILURE, "failed to connect server"); |
| } |
| return sock; |
| } |
| |
| static void |
| send_version(int sock) |
| { |
| struct vfio_user_version cversion; |
| struct iovec iovecs[3] = { { 0 } }; |
| char client_caps[1024]; |
| int msg_id = 0xbada55; |
| int slen; |
| int ret; |
| |
| slen = snprintf(client_caps, sizeof(client_caps), |
| "{" |
| "\"capabilities\":{" |
| "\"max_msg_fds\":%u," |
| "\"max_data_xfer_size\":%u," |
| "\"migration\":{" |
| "\"pgsize\":%zu" |
| "}" |
| "}" |
| "}", CLIENT_MAX_FDS, CLIENT_MAX_DATA_XFER_SIZE, sysconf(_SC_PAGESIZE)); |
| |
| cversion.major = LIB_VFIO_USER_MAJOR; |
| cversion.minor = LIB_VFIO_USER_MINOR; |
| |
| /* [0] is for the header. */ |
| iovecs[1].iov_base = &cversion; |
| iovecs[1].iov_len = sizeof(cversion); |
| iovecs[2].iov_base = client_caps; |
| /* Include the NUL. */ |
| iovecs[2].iov_len = slen + 1; |
| |
| ret = tran_sock_send_iovec(sock, msg_id, false, VFIO_USER_VERSION, |
| iovecs, ARRAY_SIZE(iovecs), NULL, 0, 0); |
| |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to send client version message"); |
| } |
| } |
| |
| static void |
| recv_version(int sock, int *server_max_fds, size_t *server_max_data_xfer_size, |
| size_t *pgsize) |
| { |
| struct vfio_user_version *sversion = NULL; |
| struct vfio_user_header hdr; |
| size_t vlen; |
| int ret; |
| |
| ret = tran_sock_recv_alloc(sock, &hdr, true, NULL, |
| (void **)&sversion, &vlen); |
| |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to receive version"); |
| } |
| |
| if (hdr.cmd != VFIO_USER_VERSION) { |
| errx(EXIT_FAILURE, "msg%hx: invalid cmd %hu (expected %u)", |
| hdr.msg_id, hdr.cmd, VFIO_USER_VERSION); |
| } |
| |
| if (vlen < sizeof(*sversion)) { |
| errx(EXIT_FAILURE, "VFIO_USER_VERSION: invalid size %lu", vlen); |
| } |
| |
| if (sversion->major != LIB_VFIO_USER_MAJOR) { |
| errx(EXIT_FAILURE, "unsupported server major %hu (must be %u)", |
| sversion->major, LIB_VFIO_USER_MAJOR); |
| } |
| |
| /* |
| * The server is supposed to tell us the minimum agreed version. |
| */ |
| if (sversion->minor > LIB_VFIO_USER_MINOR) { |
| errx(EXIT_FAILURE, "unsupported server minor %hu (must be <= %u)", |
| sversion->minor, LIB_VFIO_USER_MINOR); |
| } |
| |
| *server_max_fds = 1; |
| *server_max_data_xfer_size = VFIO_USER_DEFAULT_MAX_DATA_XFER_SIZE; |
| *pgsize = sysconf(_SC_PAGESIZE); |
| |
| if (vlen > sizeof(*sversion)) { |
| const char *json_str = (const char *)sversion->data; |
| size_t len = vlen - sizeof(*sversion); |
| |
| if (json_str[len - 1] != '\0') { |
| errx(EXIT_FAILURE, "ignoring invalid JSON from server"); |
| } |
| |
| ret = tran_parse_version_json(json_str, server_max_fds, |
| server_max_data_xfer_size, pgsize); |
| |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to parse server JSON \"%s\"", json_str); |
| } |
| } |
| |
| free(sversion); |
| } |
| |
| static void |
| negotiate(int sock, int *server_max_fds, size_t *server_max_data_xfer_size, |
| size_t *pgsize) |
| { |
| send_version(sock); |
| recv_version(sock, server_max_fds, server_max_data_xfer_size, pgsize); |
| } |
| |
| static void |
| send_device_reset(int sock) |
| { |
| int ret = tran_sock_msg(sock, 1, VFIO_USER_DEVICE_RESET, |
| NULL, 0, NULL, NULL, 0); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to reset device"); |
| } |
| } |
| |
| /* returns whether a VFIO migration capability is found */ |
| static bool |
| get_region_vfio_caps(struct vfio_info_cap_header *header, |
| struct vfio_region_info_cap_sparse_mmap **sparse) |
| { |
| struct vfio_region_info_cap_type *type; |
| unsigned int i; |
| bool migr = false; |
| |
| while (true) { |
| switch (header->id) { |
| case VFIO_REGION_INFO_CAP_SPARSE_MMAP: |
| *sparse = (struct vfio_region_info_cap_sparse_mmap *)header; |
| printf("client: %s: Sparse cap nr_mmap_areas %d\n", __func__, |
| (*sparse)->nr_areas); |
| for (i = 0; i < (*sparse)->nr_areas; i++) { |
| printf("client: %s: area %d offset %#llx size %llu\n", |
| __func__, i, (*sparse)->areas[i].offset, |
| (*sparse)->areas[i].size); |
| } |
| break; |
| case VFIO_REGION_INFO_CAP_TYPE: |
| type = (struct vfio_region_info_cap_type*)header; |
| if (type->type != VFIO_REGION_TYPE_MIGRATION || |
| type->subtype != VFIO_REGION_SUBTYPE_MIGRATION) { |
| errx(EXIT_FAILURE, "bad region type %d/%d", type->type, |
| type->subtype); |
| } |
| migr = true; |
| printf("client: migration region\n"); |
| break; |
| default: |
| errx(EXIT_FAILURE, "bad VFIO cap ID %#x", header->id); |
| } |
| if (header->next == 0) { |
| break; |
| } |
| header = (struct vfio_info_cap_header*)((char*)header + header->next - sizeof(struct vfio_region_info)); |
| } |
| return migr; |
| } |
| |
| static void |
| do_get_device_region_info(int sock, struct vfio_region_info *region_info, |
| int *fds, size_t *nr_fds) |
| { |
| int ret = tran_sock_msg_fds(sock, 0xabcd, VFIO_USER_DEVICE_GET_REGION_INFO, |
| region_info, region_info->argsz, NULL, |
| region_info, region_info->argsz, fds, nr_fds); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to get device region info"); |
| } |
| } |
| |
| static void |
| mmap_sparse_areas(int *fds, struct vfio_region_info *region_info, |
| struct vfio_region_info_cap_sparse_mmap *sparse) |
| { |
| size_t i; |
| |
| for (i = 0; i < sparse->nr_areas; i++) { |
| |
| ssize_t ret; |
| void *addr; |
| char pathname[PATH_MAX]; |
| char buf[PATH_MAX] = ""; |
| |
| ret = snprintf(pathname, sizeof(pathname), "/proc/self/fd/%d", fds[i]); |
| assert(ret != -1 && (size_t)ret < sizeof(pathname)); |
| ret = readlink(pathname, buf, sizeof(buf) - 1); |
| if (ret == -1) { |
| err(EXIT_FAILURE, "failed to resolve file descriptor %d", fds[i]); |
| } |
| addr = mmap(NULL, sparse->areas[i].size, PROT_READ | PROT_WRITE, |
| MAP_SHARED, fds[i], region_info->offset + |
| sparse->areas[i].offset); |
| if (addr == MAP_FAILED) { |
| err(EXIT_FAILURE, |
| "failed to mmap sparse region #%lu in %s (%#llx-%#llx)", |
| i, buf, sparse->areas[i].offset, |
| sparse->areas[i].offset + sparse->areas[i].size - 1); |
| } |
| |
| ret = munmap(addr, sparse->areas[i].size); |
| assert(ret == 0); |
| } |
| } |
| |
| static void |
| get_device_region_info(int sock, uint32_t index) |
| { |
| struct vfio_region_info *region_info; |
| size_t cap_sz; |
| size_t size = sizeof(struct vfio_region_info); |
| int fds[CLIENT_MAX_FDS] = { 0 }; |
| size_t nr_fds = ARRAY_SIZE(fds); |
| |
| |
| region_info = alloca(size); |
| memset(region_info, 0, size); |
| region_info->argsz = size; |
| region_info->index = index; |
| |
| do_get_device_region_info(sock, region_info, NULL, 0); |
| if (region_info->argsz > size) { |
| size = region_info->argsz; |
| region_info = alloca(size); |
| memset(region_info, 0, size); |
| region_info->argsz = size; |
| region_info->index = index; |
| do_get_device_region_info(sock, region_info, fds, &nr_fds); |
| assert(region_info->argsz == size); |
| } else { |
| nr_fds = 0; |
| } |
| |
| cap_sz = region_info->argsz - sizeof(struct vfio_region_info); |
| printf("client: %s: region_info[%d] offset %#llx flags %#x size %llu " |
| "cap_sz %lu #FDs %lu\n", __func__, index, region_info->offset, |
| region_info->flags, region_info->size, cap_sz, nr_fds); |
| if (cap_sz) { |
| struct vfio_region_info_cap_sparse_mmap *sparse = NULL; |
| if (get_region_vfio_caps((struct vfio_info_cap_header*)(region_info + 1), |
| &sparse)) { |
| if (sparse != NULL) { |
| assert((index == VFU_PCI_DEV_BAR1_REGION_IDX && nr_fds == 2) || |
| (index == VFU_PCI_DEV_MIGR_REGION_IDX && nr_fds == 1)); |
| assert(nr_fds == sparse->nr_areas); |
| mmap_sparse_areas(fds, region_info, sparse); |
| } |
| } |
| } |
| } |
| |
| static void |
| get_device_regions_info(int sock, struct vfio_user_device_info *client_dev_info) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < client_dev_info->num_regions; i++) { |
| get_device_region_info(sock, i); |
| } |
| } |
| |
| static void |
| get_device_info(int sock, struct vfio_user_device_info *dev_info) |
| { |
| uint16_t msg_id = 0xb10c; |
| int ret; |
| |
| dev_info->argsz = sizeof(*dev_info); |
| |
| ret = tran_sock_msg(sock, msg_id, |
| VFIO_USER_DEVICE_GET_INFO, |
| dev_info, sizeof(*dev_info), |
| NULL, |
| dev_info, sizeof(*dev_info)); |
| |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to get device info"); |
| } |
| |
| if (dev_info->num_regions != 10) { |
| errx(EXIT_FAILURE, "bad number of device regions %d", |
| dev_info->num_regions); |
| } |
| |
| printf("client: devinfo: flags %#x, num_regions %d, num_irqs %d\n", |
| dev_info->flags, dev_info->num_regions, dev_info->num_irqs); |
| } |
| |
| static int |
| configure_irqs(int sock) |
| { |
| struct iovec iovecs[2] = { { 0, } }; |
| struct vfio_irq_set irq_set; |
| uint16_t msg_id = 0x1bad; |
| int irq_fd; |
| int i, ret; |
| |
| for (i = 0; i < VFU_DEV_NUM_IRQS; i++) { /* TODO move body of loop into function */ |
| struct vfio_irq_info vfio_irq_info = { |
| .argsz = sizeof(vfio_irq_info), |
| .index = i |
| }; |
| ret = tran_sock_msg(sock, msg_id, |
| VFIO_USER_DEVICE_GET_IRQ_INFO, |
| &vfio_irq_info, sizeof(vfio_irq_info), |
| NULL, |
| &vfio_irq_info, sizeof(vfio_irq_info)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to get %s info", irq_to_str[i]); |
| } |
| if (vfio_irq_info.count > 0) { |
| printf("client: IRQ %s: count=%d flags=%#x\n", |
| irq_to_str[i], vfio_irq_info.count, vfio_irq_info.flags); |
| } |
| } |
| |
| msg_id++; |
| |
| irq_set.argsz = sizeof(irq_set); |
| irq_set.flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER; |
| irq_set.index = 0; |
| irq_set.start = 0; |
| irq_set.count = 1; |
| irq_fd = eventfd(0, 0); |
| if (irq_fd == -1) { |
| err(EXIT_FAILURE, "failed to create eventfd"); |
| } |
| |
| /* [0] is for the header. */ |
| iovecs[1].iov_base = &irq_set; |
| iovecs[1].iov_len = sizeof(irq_set); |
| |
| ret = tran_sock_msg_iovec(sock, msg_id, VFIO_USER_DEVICE_SET_IRQS, |
| iovecs, ARRAY_SIZE(iovecs), |
| &irq_fd, 1, |
| NULL, NULL, 0, NULL, 0); |
| |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to send configure IRQs message"); |
| } |
| |
| return irq_fd; |
| } |
| |
| static int |
| access_region(int sock, int region, bool is_write, uint64_t offset, |
| void *data, size_t data_len) |
| { |
| static int msg_id = 0xf00f; |
| struct vfio_user_region_access send_region_access = { |
| .offset = offset, |
| .region = region, |
| .count = data_len |
| }; |
| struct iovec send_iovecs[3] = { |
| [1] = { |
| .iov_base = &send_region_access, |
| .iov_len = sizeof(send_region_access) |
| }, |
| [2] = { |
| .iov_base = data, |
| .iov_len = data_len |
| } |
| }; |
| static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; |
| struct vfio_user_region_access *recv_data; |
| size_t nr_send_iovecs, recv_data_len; |
| int op, ret; |
| |
| if (is_write) { |
| op = VFIO_USER_REGION_WRITE; |
| nr_send_iovecs = 3; |
| recv_data_len = sizeof(*recv_data); |
| } else { |
| op = VFIO_USER_REGION_READ; |
| nr_send_iovecs = 2; |
| recv_data_len = sizeof(*recv_data) + data_len; |
| } |
| |
| recv_data = calloc(1, recv_data_len); |
| |
| if (recv_data == NULL) { |
| err(EXIT_FAILURE, "failed to alloc recv_data"); |
| } |
| |
| pthread_mutex_lock(&mutex); |
| ret = tran_sock_msg_iovec(sock, msg_id--, op, |
| send_iovecs, nr_send_iovecs, |
| NULL, 0, NULL, |
| recv_data, recv_data_len, NULL, 0); |
| pthread_mutex_unlock(&mutex); |
| if (ret != 0) { |
| warn("failed to %s region %d %#lx-%#lx", |
| is_write ? "write to" : "read from", region, offset, |
| offset + data_len - 1); |
| free(recv_data); |
| return ret; |
| } |
| if (recv_data->count != data_len) { |
| warnx("bad %s data count, expected=%lu, actual=%d", |
| is_write ? "write" : "read", data_len, |
| recv_data->count); |
| free(recv_data); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| /* |
| * TODO we could avoid the memcpy if tran_sock_msg_iovec() received the |
| * response into an iovec, but it's some work to implement it. |
| */ |
| if (!is_write) { |
| memcpy(data, ((char *)recv_data) + sizeof(*recv_data), data_len); |
| } |
| free(recv_data); |
| return 0; |
| } |
| |
| static void |
| access_bar0(int sock, time_t *t) |
| { |
| int ret; |
| |
| assert(t != NULL); |
| |
| ret = access_region(sock, VFU_PCI_DEV_BAR0_REGION_IDX, true, 0, t, sizeof(*t)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to write to BAR0"); |
| } |
| |
| printf("client: wrote to BAR0: %ld\n", *t); |
| |
| ret = access_region(sock, VFU_PCI_DEV_BAR0_REGION_IDX, false, 0, t, sizeof(*t)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to read from BAR0"); |
| } |
| |
| printf("client: read from BAR0: %ld\n", *t); |
| } |
| |
| static void |
| wait_for_irq(int irq_fd) |
| { |
| uint64_t val; |
| |
| if (read(irq_fd, &val, sizeof(val)) == -1) { |
| err(EXIT_FAILURE, "failed to read from irqfd"); |
| } |
| printf("client: INTx triggered!\n"); |
| } |
| |
| static void |
| handle_dma_write(int sock, struct vfio_user_dma_map *dma_regions, |
| int nr_dma_regions, int *dma_region_fds) |
| { |
| struct vfio_user_dma_region_access dma_access; |
| struct vfio_user_header hdr; |
| int ret, i; |
| size_t size = sizeof(dma_access); |
| uint16_t msg_id = 0xcafe; |
| void *data; |
| |
| ret = tran_sock_recv(sock, &hdr, false, &msg_id, &dma_access, &size); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to receive DMA read"); |
| } |
| |
| data = calloc(dma_access.count, 1); |
| if (data == NULL) { |
| err(EXIT_FAILURE, NULL); |
| } |
| |
| if (recv(sock, data, dma_access.count, 0) == -1) { |
| err(EXIT_FAILURE, "failed to receive DMA read data"); |
| } |
| |
| for (i = 0; i < nr_dma_regions; i++) { |
| off_t offset; |
| ssize_t c; |
| |
| if (dma_access.addr < dma_regions[i].addr || |
| dma_access.addr >= dma_regions[i].addr + dma_regions[i].size) { |
| continue; |
| } |
| |
| offset = dma_regions[i].offset + dma_access.addr; |
| |
| c = pwrite(dma_region_fds[i], data, dma_access.count, offset); |
| |
| if (c != (ssize_t)dma_access.count) { |
| err(EXIT_FAILURE, "failed to write to fd=%d at [%#lx-%#lx)", |
| dma_region_fds[i], offset, offset + dma_access.count); |
| } |
| break; |
| } |
| |
| assert(i != nr_dma_regions); |
| |
| ret = tran_sock_send(sock, msg_id, true, VFIO_USER_DMA_WRITE, |
| &dma_access, sizeof(dma_access)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to send reply of DMA write"); |
| } |
| free(data); |
| } |
| |
| static void |
| handle_dma_read(int sock, struct vfio_user_dma_map *dma_regions, |
| int nr_dma_regions, int *dma_region_fds) |
| { |
| struct vfio_user_dma_region_access dma_access, *response; |
| struct vfio_user_header hdr; |
| int ret, i, response_sz; |
| size_t size = sizeof(dma_access); |
| uint16_t msg_id = 0xcafe; |
| void *data; |
| |
| ret = tran_sock_recv(sock, &hdr, false, &msg_id, &dma_access, &size); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to receive DMA read"); |
| } |
| |
| response_sz = sizeof(dma_access) + dma_access.count; |
| response = calloc(response_sz, 1); |
| if (response == NULL) { |
| err(EXIT_FAILURE, NULL); |
| } |
| response->addr = dma_access.addr; |
| response->count = dma_access.count; |
| data = (char *)response->data; |
| |
| for (i = 0; i < nr_dma_regions; i++) { |
| off_t offset; |
| ssize_t c; |
| |
| if (dma_access.addr < dma_regions[i].addr || |
| dma_access.addr >= dma_regions[i].addr + dma_regions[i].size) { |
| continue; |
| } |
| |
| offset = dma_regions[i].offset + dma_access.addr; |
| |
| c = pread(dma_region_fds[i], data, dma_access.count, offset); |
| |
| if (c != (ssize_t)dma_access.count) { |
| err(EXIT_FAILURE, "failed to read from fd=%d at [%#lx-%#lx)", |
| dma_region_fds[i], offset, offset + dma_access.count); |
| } |
| break; |
| } |
| |
| assert(i != nr_dma_regions); |
| |
| ret = tran_sock_send(sock, msg_id, true, VFIO_USER_DMA_READ, |
| response, response_sz); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to send reply of DMA read"); |
| } |
| free(response); |
| } |
| |
| static void |
| handle_dma_io(int sock, struct vfio_user_dma_map *dma_regions, |
| int nr_dma_regions, int *dma_region_fds) |
| { |
| size_t i; |
| |
| for (i = 0; i < 4096 / CLIENT_MAX_DATA_XFER_SIZE; i++) { |
| handle_dma_write(sock, dma_regions, nr_dma_regions, dma_region_fds); |
| } |
| for (i = 0; i < 4096 / CLIENT_MAX_DATA_XFER_SIZE; i++) { |
| handle_dma_read(sock, dma_regions, nr_dma_regions, dma_region_fds); |
| } |
| } |
| |
| static void |
| get_dirty_bitmap(int sock, struct vfio_user_dma_map *dma_region) |
| { |
| uint64_t bitmap_size = _get_bitmap_size(dma_region->size, |
| sysconf(_SC_PAGESIZE)); |
| struct vfio_user_dirty_pages *dirty_pages; |
| struct vfio_user_bitmap_range *range; |
| char *bitmap; |
| size_t size; |
| void *data; |
| int ret; |
| |
| size = sizeof(*dirty_pages) + sizeof(*range) + bitmap_size; |
| |
| data = calloc(1, size); |
| assert(data != NULL); |
| |
| dirty_pages = data; |
| dirty_pages->flags = VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP; |
| dirty_pages->argsz = sizeof(*dirty_pages) + sizeof(*range) + bitmap_size; |
| |
| range = data + sizeof(*dirty_pages); |
| range->iova = dma_region->addr; |
| range->size = dma_region->size; |
| range->bitmap.size = bitmap_size; |
| range->bitmap.pgsize = sysconf(_SC_PAGESIZE); |
| |
| bitmap = data + sizeof(*dirty_pages) + sizeof(*range); |
| |
| ret = tran_sock_msg(sock, 0x99, VFIO_USER_DIRTY_PAGES, |
| data, sizeof(*dirty_pages) + sizeof(*range), |
| NULL, data, size); |
| if (ret != 0) { |
| err(EXIT_FAILURE, "failed to get dirty page bitmap"); |
| } |
| |
| printf("client: %s: %#lx-%#lx\t%#x\n", __func__, range->iova, |
| range->iova + range->size - 1, bitmap[0]); |
| |
| free(data); |
| } |
| |
| static void |
| usage(char *argv0) |
| { |
| fprintf(stderr, "Usage: %s [-h] [-m src|dst] /path/to/socket\n", |
| basename(argv0)); |
| } |
| |
| /* |
| * Normally each time the source client (QEMU) would read migration data from |
| * the device it would send them to the destination client. However, since in |
| * our sample both the source and the destination client are the same process, |
| * we simply accumulate the migration data of each iteration and apply it to |
| * the destination server at the end. |
| * |
| * Performs as many migration loops as @nr_iters or until the device has no |
| * more migration data (pending_bytes is zero), which ever comes first. The |
| * result of each migration iteration is stored in @migr_iter. @migr_iter must |
| * be at least @nr_iters. |
| * |
| * @returns the number of iterations performed |
| */ |
| static size_t |
| do_migrate(int sock, size_t nr_iters, struct iovec *migr_iter) |
| { |
| int ret; |
| uint64_t pending_bytes, data_offset, data_size; |
| size_t i = 0; |
| |
| assert(nr_iters > 0); |
| |
| /* XXX read pending_bytes */ |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, false, |
| offsetof(struct vfio_user_migration_info, pending_bytes), |
| &pending_bytes, sizeof(pending_bytes)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to read pending_bytes"); |
| } |
| |
| for (i = 0; i < nr_iters && pending_bytes > 0; i++) { |
| |
| /* XXX read data_offset and data_size */ |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, false, |
| offsetof(struct vfio_user_migration_info, data_offset), |
| &data_offset, sizeof(data_offset)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to read data_offset"); |
| } |
| |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, false, |
| offsetof(struct vfio_user_migration_info, data_size), |
| &data_size, sizeof(data_size)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to read data_size"); |
| } |
| |
| migr_iter[i].iov_len = data_size; |
| migr_iter[i].iov_base = malloc(data_size); |
| if (migr_iter[i].iov_base == NULL) { |
| err(EXIT_FAILURE, "failed to allocate migration buffer"); |
| } |
| |
| /* XXX read migration data */ |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, false, |
| data_offset, |
| (char *)migr_iter[i].iov_base, data_size); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to read migration data"); |
| } |
| |
| /* FIXME send migration data to the destination client process */ |
| |
| /* |
| * XXX read pending_bytes again to indicate to the server that the |
| * migration data have been consumed. |
| */ |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, false, |
| offsetof(struct vfio_user_migration_info, pending_bytes), |
| &pending_bytes, sizeof(pending_bytes)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to read pending_bytes"); |
| } |
| } |
| return i; |
| } |
| |
| struct fake_guest_data { |
| int sock; |
| size_t bar1_size; |
| bool done; |
| uint32_t *crcp; |
| }; |
| |
| static void * |
| fake_guest(void *arg) |
| { |
| struct fake_guest_data *fake_guest_data = arg; |
| int ret; |
| char buf[fake_guest_data->bar1_size]; |
| FILE *fp = fopen("/dev/urandom", "r"); |
| uint32_t crc = 0; |
| |
| if (fp == NULL) { |
| err(EXIT_FAILURE, "failed to open /dev/urandom"); |
| } |
| |
| |
| do { |
| ret = fread(buf, fake_guest_data->bar1_size, 1, fp); |
| if (ret != 1) { |
| errx(EXIT_FAILURE, "short read %d", ret); |
| } |
| ret = access_region(fake_guest_data->sock, 1, true, 0, buf, |
| fake_guest_data->bar1_size); |
| if (ret != 0) { |
| err(EXIT_FAILURE, "fake guest failed to write garbage to BAR1"); |
| } |
| crc = rte_hash_crc(buf, fake_guest_data->bar1_size, crc); |
| __sync_synchronize(); |
| } while (!fake_guest_data->done); |
| |
| *fake_guest_data->crcp = crc; |
| |
| return NULL; |
| } |
| |
| static size_t |
| migrate_from(int sock, size_t *nr_iters, struct iovec **migr_iters, |
| uint32_t *crcp, size_t bar1_size) |
| { |
| uint32_t device_state; |
| int ret; |
| size_t _nr_iters; |
| pthread_t thread; |
| struct fake_guest_data fake_guest_data = { |
| .sock = sock, |
| .bar1_size = bar1_size, |
| .done = false, |
| .crcp = crcp |
| }; |
| |
| ret = pthread_create(&thread, NULL, fake_guest, &fake_guest_data); |
| if (ret != 0) { |
| errno = ret; |
| err(EXIT_FAILURE, "failed to create pthread"); |
| } |
| |
| *nr_iters = 2; |
| *migr_iters = malloc(sizeof(struct iovec) * *nr_iters); |
| if (*migr_iters == NULL) { |
| err(EXIT_FAILURE, NULL); |
| } |
| |
| /* |
| * XXX set device state to pre-copy. This is technically optional but any |
| * VMM that cares about performance needs this. |
| */ |
| device_state = VFIO_DEVICE_STATE_SAVING | VFIO_DEVICE_STATE_RUNNING; |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, true, |
| offsetof(struct vfio_user_migration_info, device_state), |
| &device_state, sizeof(device_state)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to write to device state"); |
| } |
| |
| _nr_iters = do_migrate(sock, 1, *migr_iters); |
| assert(_nr_iters == 1); |
| printf("client: stopping fake guest thread\n"); |
| fake_guest_data.done = true; |
| __sync_synchronize(); |
| ret = pthread_join(thread, NULL); |
| if (ret != 0) { |
| errno = ret; |
| err(EXIT_FAILURE, "failed to join fake guest pthread"); |
| } |
| |
| printf("client: setting device state to stop-and-copy\n"); |
| |
| device_state = VFIO_DEVICE_STATE_SAVING; |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, true, |
| offsetof(struct vfio_user_migration_info, device_state), |
| &device_state, sizeof(device_state)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to write to device state"); |
| } |
| |
| _nr_iters += do_migrate(sock, 1, (*migr_iters) + _nr_iters); |
| if (_nr_iters != 2) { |
| errx(EXIT_FAILURE, |
| "expected 2 iterations instead of %ld while in stop-and-copy state", |
| _nr_iters); |
| } |
| |
| /* XXX read device state, migration must have finished now */ |
| device_state = VFIO_DEVICE_STATE_STOP; |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, true, |
| offsetof(struct vfio_user_migration_info, device_state), |
| &device_state, sizeof(device_state)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to write to device state"); |
| } |
| |
| return _nr_iters; |
| } |
| |
| static int |
| migrate_to(char *old_sock_path, int *server_max_fds, |
| size_t *server_max_data_xfer_size, size_t *pgsize, size_t nr_iters, |
| struct iovec *migr_iters, char *path_to_server, |
| uint32_t src_crc, size_t bar1_size) |
| { |
| int ret, sock; |
| char *sock_path; |
| struct stat sb; |
| uint32_t device_state = VFIO_DEVICE_STATE_RESUMING; |
| uint64_t data_offset, data_len; |
| size_t i; |
| uint32_t dst_crc; |
| char buf[bar1_size]; |
| |
| assert(old_sock_path != NULL); |
| |
| printf("client: starting destination server\n"); |
| |
| ret = asprintf(&sock_path, "%s_migrated", old_sock_path); |
| if (ret == -1) { |
| err(EXIT_FAILURE, "failed to asprintf"); |
| } |
| |
| ret = fork(); |
| if (ret == -1) { |
| err(EXIT_FAILURE, "failed to fork"); |
| } |
| if (ret > 0) { /* child (destination server) */ |
| char *_argv[] = { |
| path_to_server, |
| "-v", |
| sock_path, |
| NULL |
| }; |
| ret = execvp(_argv[0] , _argv); |
| if (ret != 0) { |
| err(EXIT_FAILURE, "failed to start destination server (%s)", |
| path_to_server); |
| } |
| } |
| |
| /* parent (client) */ |
| |
| /* wait for the server to come up */ |
| while (stat(sock_path, &sb) == -1) { |
| if (errno != ENOENT) { |
| err(EXIT_FAILURE, "failed to stat %s", sock_path); |
| } |
| } |
| if ((sb.st_mode & S_IFMT) != S_IFSOCK) { |
| errx(EXIT_FAILURE, "%s: not a socket", sock_path); |
| } |
| |
| /* connect to the destination server */ |
| sock = init_sock(sock_path); |
| free(sock_path); |
| |
| negotiate(sock, server_max_fds, server_max_data_xfer_size, pgsize); |
| |
| /* XXX set device state to resuming */ |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, true, |
| offsetof(struct vfio_user_migration_info, device_state), |
| &device_state, sizeof(device_state)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to set device state to resuming"); |
| } |
| |
| for (i = 0; i < nr_iters; i++) { |
| |
| /* XXX read data offset */ |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, false, |
| offsetof(struct vfio_user_migration_info, data_offset), |
| &data_offset, sizeof(data_offset)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to read migration data offset"); |
| } |
| |
| /* XXX write migration data */ |
| |
| /* |
| * TODO write half of migration data via regular write and other half via |
| * memopy map. |
| */ |
| printf("client: writing migration device data %#lx-%#lx\n", |
| data_offset, data_offset + migr_iters[i].iov_len - 1); |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, true, |
| data_offset, migr_iters[i].iov_base, |
| migr_iters[i].iov_len); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to write device migration data"); |
| } |
| |
| /* XXX write data_size */ |
| data_len = migr_iters[i].iov_len; |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, true, |
| offsetof(struct vfio_user_migration_info, data_size), |
| &data_len, sizeof(data_len)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to write migration data size"); |
| } |
| } |
| |
| /* XXX set device state to running */ |
| device_state = VFIO_DEVICE_STATE_RUNNING; |
| ret = access_region(sock, VFU_PCI_DEV_MIGR_REGION_IDX, true, |
| offsetof(struct vfio_user_migration_info, device_state), |
| &device_state, sizeof(device_state)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to set device state to running"); |
| } |
| |
| /* validate contents of BAR1 */ |
| |
| if (access_region(sock, 1, false, 0, buf, bar1_size) != 0) { |
| err(EXIT_FAILURE, "failed to read BAR1"); |
| } |
| |
| dst_crc = rte_hash_crc(buf, bar1_size, 0); |
| |
| if (dst_crc != src_crc) { |
| fprintf(stderr, "client: CRC mismatch: %u != %u\n", src_crc, dst_crc); |
| abort(); |
| } |
| |
| return sock; |
| } |
| |
| static void |
| map_dma_regions(int sock, struct vfio_user_dma_map *dma_regions, |
| int *dma_region_fds, int nr_dma_regions) |
| { |
| int i, ret; |
| |
| for (i = 0; i < nr_dma_regions; i++) { |
| struct iovec iovecs[2] = { |
| /* [0] is for the header. */ |
| [1] = { |
| .iov_base = &dma_regions[i], |
| .iov_len = sizeof(*dma_regions) |
| } |
| }; |
| ret = tran_sock_msg_iovec(sock, 0x1234 + i, VFIO_USER_DMA_MAP, |
| iovecs, ARRAY_SIZE(iovecs), |
| &dma_region_fds[i], 1, |
| NULL, NULL, 0, NULL, 0); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to map DMA regions"); |
| } |
| } |
| } |
| |
| int main(int argc, char *argv[]) |
| { |
| char template[] = "/tmp/libvfio-user.XXXXXX"; |
| int ret, sock, irq_fd; |
| struct vfio_user_dma_map *dma_regions; |
| struct vfio_user_device_info client_dev_info = {0}; |
| int *dma_region_fds; |
| int i; |
| int tmpfd; |
| int server_max_fds; |
| size_t server_max_data_xfer_size; |
| size_t pgsize; |
| int nr_dma_regions; |
| struct vfio_user_dirty_pages dirty_pages = {0}; |
| int opt; |
| time_t t; |
| char *path_to_server = NULL; |
| vfu_pci_hdr_t config_space; |
| struct iovec *migr_iters; |
| size_t nr_iters; |
| uint32_t crc; |
| size_t bar1_size = 0x3000; /* FIXME get this value from region info */ |
| |
| while ((opt = getopt(argc, argv, "h")) != -1) { |
| switch (opt) { |
| case 'h': |
| usage(argv[0]); |
| exit(EXIT_SUCCESS); |
| default: |
| usage(argv[0]); |
| exit(EXIT_FAILURE); |
| } |
| } |
| |
| if (argc != optind + 1) { |
| usage(argv[0]); |
| exit(EXIT_FAILURE); |
| } |
| |
| sock = init_sock(argv[optind]); |
| |
| /* |
| * VFIO_USER_VERSION |
| * |
| * Do intial negotiation with the server, and discover parameters. |
| */ |
| negotiate(sock, &server_max_fds, &server_max_data_xfer_size, &pgsize); |
| |
| /* try to access a bogus region, we should get an error */ |
| ret = access_region(sock, 0xdeadbeef, false, 0, &ret, sizeof(ret)); |
| if (ret != -1 || errno != EINVAL) { |
| errx(EXIT_FAILURE, |
| "expected EINVAL accessing bogus region, got %d instead", errno); |
| } |
| |
| /* XXX VFIO_USER_DEVICE_GET_INFO */ |
| get_device_info(sock, &client_dev_info); |
| |
| /* VFIO_USER_DEVICE_GET_REGION_INFO */ |
| get_device_regions_info(sock, &client_dev_info); |
| |
| ret = access_region(sock, VFU_PCI_DEV_CFG_REGION_IDX, false, 0, &config_space, |
| sizeof(config_space)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to read PCI configuration space"); |
| } |
| |
| assert(config_space.id.vid == 0xdead); |
| assert(config_space.id.did == 0xbeef); |
| assert(config_space.ss.vid == 0xcafe); |
| assert(config_space.ss.sid == 0xbabe); |
| |
| /* XXX VFIO_USER_DEVICE_RESET */ |
| send_device_reset(sock); |
| |
| /* |
| * XXX VFIO_USER_DMA_MAP |
| * |
| * Tell the server we have some DMA regions it can access. |
| */ |
| nr_dma_regions = server_max_fds << 1; |
| |
| umask(0022); |
| |
| if ((tmpfd = mkstemp(template)) == -1) { |
| err(EXIT_FAILURE, "failed to create backing file"); |
| } |
| |
| if ((ret = ftruncate(tmpfd, nr_dma_regions * sysconf(_SC_PAGESIZE))) == -1) { |
| err(EXIT_FAILURE, "failed to truncate file"); |
| } |
| |
| unlink(template); |
| |
| dma_regions = alloca(sizeof(*dma_regions) * nr_dma_regions); |
| dma_region_fds = alloca(sizeof(*dma_region_fds) * nr_dma_regions); |
| |
| for (i = 0; i < nr_dma_regions; i++) { |
| dma_regions[i].argsz = sizeof(struct vfio_user_dma_map); |
| dma_regions[i].addr = i * sysconf(_SC_PAGESIZE); |
| dma_regions[i].size = sysconf(_SC_PAGESIZE); |
| dma_regions[i].offset = dma_regions[i].addr; |
| dma_regions[i].flags = VFIO_USER_F_DMA_REGION_READ | VFIO_USER_F_DMA_REGION_WRITE; |
| dma_region_fds[i] = tmpfd; |
| } |
| |
| map_dma_regions(sock, dma_regions, dma_region_fds, nr_dma_regions); |
| |
| /* |
| * XXX VFIO_USER_DEVICE_GET_IRQ_INFO and VFIO_IRQ_SET_ACTION_TRIGGER |
| * Query interrupts and configure an eventfd to be associated with INTx. |
| */ |
| irq_fd = configure_irqs(sock); |
| |
| dirty_pages.argsz = sizeof(dirty_pages); |
| dirty_pages.flags = VFIO_IOMMU_DIRTY_PAGES_FLAG_START; |
| ret = tran_sock_msg(sock, 0, VFIO_USER_DIRTY_PAGES, |
| &dirty_pages, sizeof(dirty_pages), |
| NULL, NULL, 0); |
| if (ret != 0) { |
| err(EXIT_FAILURE, "failed to start dirty page logging"); |
| } |
| |
| /* |
| * XXX VFIO_USER_REGION_READ and VFIO_USER_REGION_WRITE |
| * |
| * BAR0 in the server does not support memory mapping so it must be accessed |
| * via explicit messages. |
| */ |
| t = time(NULL) + 1; |
| access_bar0(sock, &t); |
| |
| wait_for_irq(irq_fd); |
| |
| /* FIXME check that above took at least 1s */ |
| |
| handle_dma_io(sock, dma_regions, nr_dma_regions, dma_region_fds); |
| |
| for (i = 0; i < nr_dma_regions; i++) { |
| get_dirty_bitmap(sock, &dma_regions[i]); |
| } |
| |
| dirty_pages.argsz = sizeof(dirty_pages); |
| dirty_pages.flags = VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP; |
| ret = tran_sock_msg(sock, 0, VFIO_USER_DIRTY_PAGES, |
| &dirty_pages, sizeof(dirty_pages), |
| NULL, NULL, 0); |
| if (ret != 0) { |
| err(EXIT_FAILURE, "failed to stop dirty page logging"); |
| } |
| |
| /* BAR1 can be memory mapped and read directly */ |
| |
| /* |
| * XXX VFIO_USER_DMA_UNMAP |
| * |
| * unmap the first group of the DMA regions |
| */ |
| for (i = 0; i < server_max_fds; i++) { |
| struct vfio_user_dma_unmap r = { |
| .argsz = sizeof(r), |
| .addr = dma_regions[i].addr, |
| .size = dma_regions[i].size |
| }; |
| ret = tran_sock_msg(sock, 7, VFIO_USER_DMA_UNMAP, &r, sizeof(r), |
| NULL, &r, sizeof(r)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to unmap DMA region"); |
| } |
| } |
| |
| /* |
| * Schedule an interrupt in 10 seconds from now in the old server and then |
| * immediatelly migrate the device. The new server should deliver the |
| * interrupt. Hopefully 10 seconds should be enough for migration to finish. |
| * TODO make this value a command line option. |
| */ |
| t = time(NULL) + 10; |
| ret = access_region(sock, VFU_PCI_DEV_BAR0_REGION_IDX, true, 0, &t, sizeof(t)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to write to BAR0"); |
| } |
| |
| nr_iters = migrate_from(sock, &nr_iters, &migr_iters, &crc, bar1_size); |
| |
| /* |
| * Normally the client would now send the device state to the destination |
| * client and then exit. We don't demonstrate how this works as this is a |
| * client implementation detail. Instead, the client starts the destination |
| * server and then applies the migration data. |
| */ |
| if (asprintf(&path_to_server, "%s/server", dirname(argv[0])) == -1) { |
| err(EXIT_FAILURE, "failed to asprintf"); |
| } |
| |
| sock = migrate_to(argv[optind], &server_max_fds, &server_max_data_xfer_size, |
| &pgsize, nr_iters, migr_iters, path_to_server, |
| crc, bar1_size); |
| free(path_to_server); |
| for (i = 0; i < (int)nr_iters; i++) { |
| free(migr_iters[i].iov_base); |
| } |
| free(migr_iters); |
| |
| /* |
| * Now we must reconfigure the destination server. |
| */ |
| |
| /* |
| * XXX reconfigure DMA regions, note that the first half of the has been |
| * unmapped. |
| */ |
| map_dma_regions(sock, dma_regions + server_max_fds, |
| dma_region_fds + server_max_fds, |
| nr_dma_regions - server_max_fds); |
| |
| /* |
| * XXX reconfigure IRQs. |
| * FIXME is this something the client needs to do? I would expect so since |
| * it's the client that creates and provides the FD. Do we need to save some |
| * state in the migration data? |
| */ |
| irq_fd = configure_irqs(sock); |
| |
| wait_for_irq(irq_fd); |
| |
| handle_dma_io(sock, dma_regions + server_max_fds, |
| nr_dma_regions - server_max_fds, |
| dma_region_fds + server_max_fds); |
| |
| struct vfio_user_dma_unmap r = { |
| .argsz = sizeof(r), |
| .addr = 0, |
| .size = 0, |
| .flags = VFIO_DMA_UNMAP_FLAG_ALL |
| }; |
| ret = tran_sock_msg(sock, 8, VFIO_USER_DMA_UNMAP, &r, sizeof(r), |
| NULL, &r, sizeof(r)); |
| if (ret < 0) { |
| err(EXIT_FAILURE, "failed to unmap all DMA regions"); |
| } |
| |
| return 0; |
| } |
| |
| /* ex: set tabstop=4 shiftwidth=4 softtabstop=4 expandtab: */ |