blob: c74902ba3295ab4f8aaf16393942f0e300f96a84 [file] [log] [blame]
/*
* Copyright (c) 2019 Nutanix Inc. All rights reserved.
*
* Authors: Thanos Makatos <thanos@nutanix.com>
* Swapnil Ingle <swapnil.ingle@nutanix.com>
* Felipe Franciosi <felipe@nutanix.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Nutanix nor the names of its contributors may be
* used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*/
/*
* Defines the libvfio-user server-side API. The protocol definitions can be
* found in vfio-user.h.
*
* This is not currently a stable API or ABI, and may change at any time.
* Library calls are not guaranteed thread-safe: multi-threaded consumers need
* to protect calls with their own exclusion methods.
*/
#ifndef LIB_VFIO_USER_H
#define LIB_VFIO_USER_H
#include <stdint.h>
#include <sys/uio.h>
#include <unistd.h>
#include <syslog.h>
#include <sys/queue.h>
#include "pci_caps/dsn.h"
#include "pci_caps/msi.h"
#include "pci_caps/msix.h"
#include "pci_caps/pm.h"
#include "pci_caps/px.h"
#include "pci_defs.h"
#include "vfio-user.h"
#ifdef __cplusplus
extern "C" {
#endif
#define LIB_VFIO_USER_MAJOR 0
#define LIB_VFIO_USER_MINOR 2
/* DMA addresses cannot be directly de-referenced. */
typedef void *vfu_dma_addr_t;
struct dma_sg;
typedef struct dma_sg dma_sg_t;
typedef struct vfu_ctx vfu_ctx_t;
/*
* Returns the size, in bytes, of dma_sg_t.
*/
size_t
dma_sg_size(void);
/*
* Attaching to the transport is non-blocking.
* The caller must then manually call vfu_attach_ctx(),
* which is non-blocking, as many times as necessary.
*
* This also applies to vfu_run_ctx(). However, it's presumed that any actual
* reads or writes of the socket connection will not need to block, since both
* APIS are synchronous.
*/
#define LIBVFIO_USER_FLAG_ATTACH_NB (1 << 0)
typedef enum {
VFU_TRANS_SOCK,
// For internal testing only
VFU_TRANS_PIPE,
VFU_TRANS_MAX
} vfu_trans_t;
typedef enum {
VFU_DEV_TYPE_PCI
} vfu_dev_type_t;
/**
* Creates libvfio-user context. By default one ERR and one REQ IRQs are
* initialized, this can be overridden with vfu_setup_device_nr_irqs.
*
* @trans: transport type
* @path: path to socket file.
* @flags: context flags (LIBVFIO_USER_FLAG_*)
* @pvt: private data
* @dev_type: device type
*
* @returns the vfu_ctx to be used or NULL on error. Sets errno.
*/
vfu_ctx_t *
vfu_create_ctx(vfu_trans_t trans, const char *path,
int flags, void *pvt, vfu_dev_type_t dev_type);
/*
* Finalizes the device making it ready for vfu_attach_ctx(). This function is
* mandatory to be called before vfu_attach_ctx().
* @vfu_ctx: the libvfio-user context
*
* @returns: 0 on success, -1 on error. Sets errno.
*/
int
vfu_realize_ctx(vfu_ctx_t *vfu_ctx);
/*
* Attempts to attach to the transport. Attach is mandatory before vfu_run_ctx()
* and is non blocking if context is created with LIBVFIO_USER_FLAG_ATTACH_NB
* flag.
*
* @returns: 0 on success, -1 on error. Sets errno. If errno is set to EAGAIN
* or EWOULDBLOCK then the transport is not ready to attach to and the operation
* must be retried.
*
* @vfu_ctx: the libvfio-user context
*/
int
vfu_attach_ctx(vfu_ctx_t *vfu_ctx);
/**
* Return a file descriptor suitable for waiting on via epoll() or similar. The
* file descriptor may change after a successful vfu_attach_ctx(), or on
* receiving ENOTCONN error message from vfu_run_ctx(); in those cases,
* vfu_get_poll_fd() should be called again to get the current correct file
* descriptor.
*/
int
vfu_get_poll_fd(vfu_ctx_t *vfu_ctx);
/**
* Polls the vfu_ctx and processes the command received from client.
* - Blocking vfu_ctx:
* Blocks until new request is received from client and continues processing
* the requests. Exits only in case of error or if the client disconnects.
* - Non-blocking vfu_ctx(LIBVFIO_USER_FLAG_ATTACH_NB):
* Processes one request from client if it's available, otherwise it
* immediately returns and the caller is responsible for periodically
* calling again.
*
* @vfu_ctx: The libvfio-user context to poll
*
* @returns the number of requests processed (0 or more); or -1 on error,
* with errno set as follows:
*
* ENOTCONN: client closed connection, vfu_attach_ctx() should be called again
* EBUSY: the device was asked to quiesce and is still quiescing
* Other errno values are also possible.
*/
int
vfu_run_ctx(vfu_ctx_t *vfu_ctx);
/**
* Destroys libvfio-user context. During this call the device must already be
* in quiesced state; the quiesce callback is not called. Any other device
* callback can be called.
*
* @vfu_ctx: the libvfio-user context to destroy
*/
void
vfu_destroy_ctx(vfu_ctx_t *vfu_ctx);
/**
* Return the private pointer given to vfu_create_ctx().
*/
void *
vfu_get_private(vfu_ctx_t *vfu_ctx);
/**
* Callback function signature for log function
* @vfu_ctx: the libvfio-user context
* @level: log level as defined in syslog(3)
* @vfu_log_fn_t: typedef for log function.
* @msg: message
*/
typedef void (vfu_log_fn_t)(vfu_ctx_t *vfu_ctx, int level, const char *msg);
/**
* Log to the logging function configured for this context. The format should
* not include a new line.
*/
void
vfu_log(vfu_ctx_t *vfu_ctx, int level, const char *fmt, ...) \
__attribute__((format(printf, 3, 4)));
/**
* Set up logging information.
* @vfu_ctx: the libvfio-user context
* @log: logging function
* @level: logging level as defined in syslog(3)
*
* The log handler is expected to add a newline (that is, log messages do not
* include a newline).
*/
int
vfu_setup_log(vfu_ctx_t *vfu_ctx, vfu_log_fn_t *log, int level);
/**
* Prototype for region access callback. When a region is accessed, libvfio-user
* calls the previously registered callback with the following arguments:
*
* @vfu_ctx: the libvfio-user context
* @buf: buffer containing the data to be written or data to be read into
* @count: number of bytes being read or written
* @offset: byte offset within the region
* @is_write: whether or not this is a write
*
* @returns the number of bytes read or written, or -1 on error, setting errno.
*/
typedef ssize_t (vfu_region_access_cb_t)(vfu_ctx_t *vfu_ctx, char *buf,
size_t count, loff_t offset,
bool is_write);
#define VFU_REGION_FLAG_READ (1 << 0)
#define VFU_REGION_FLAG_WRITE (1 << 1)
#define VFU_REGION_FLAG_RW (VFU_REGION_FLAG_READ | VFU_REGION_FLAG_WRITE)
/* If unset, this is an IO region. */
#define VFU_REGION_FLAG_MEM (1 << 2)
#define VFU_REGION_FLAG_ALWAYS_CB (1 << 3)
#define VFU_REGION_FLAG_64_BITS (1 << 4)
#define VFU_REGION_FLAG_PREFETCH (1 << 5)
#define VFU_REGION_FLAG_MASK (VFU_REGION_FLAG_RW | VFU_REGION_FLAG_MEM | \
VFU_REGION_FLAG_ALWAYS_CB | VFU_REGION_FLAG_64_BITS | \
VFU_REGION_FLAG_PREFETCH)
/**
* Set up a device region.
*
* A region is an area of device memory that can be accessed by the client,
* either via VFIO_USER_REGION_READ/WRITE, or directly by mapping the region
* into the client's address space if an fd is given.
*
* A mappable region can be split into mappable sub-areas according to the
* @mmap_areas array. Note that the client can memory map any part of the
* file descriptor, even if not supposed to do so according to @mmap_areas.
* There is no way in Linux to avoid this.
*
* TODO maybe we should introduce per-sparse region file descriptors so that
* the client cannot possibly memory map areas it's not supposed to. Even if
* the client needs to have region under the same backing file, it is possible
* to create linear device-mapper targets, one for each area, and provide file
* descriptors of these DM targets. This is something we can document and
* demonstrate in a sample.
*
* Areas that are accessed via such a mapping by definition do not invoke any
* given callback. However, the callback can still be invoked, even on a
* mappable area, if the client chooses to call VFIO_USER_REGION_READ/WRITE.
*
* The following regions are special and are explained below:
* - VFU_PCI_DEV_CFG_REGION_IDX,
* - VFU_PCI_DEV_MIGR_REGION_IDX, and
* - VFU_GENERIC_DEV_MIGR_REG_IDX.
*
* Region VFU_PCI_DEV_CFG_REGION_IDX, corresponding to PCI config space, has
* special handling:
*
* - the @size argument is ignored: the region size is always the size defined
* by the relevant PCI specification
* - all accesses to the standard PCI header (i.e. the first 64 bytes of the
* region) are handled by the library
* - all accesses to known PCI capabilities (see vfu_pci_add_capability())
* are handled by the library
* - if no callback is provided, reads to other areas are a simple memcpy(),
* and writes are an error
* - otherwise, the callback is expected to handle the access
* - if VFU_REGION_FLAG_ALWAYS_CB flag is set, all accesses to the config
* space are forwarded to the callback
*
* Regions VFU_PCI_DEV_MIGR_REGION_IDX and VFU_GENERIC_DEV_MIGR_REG_IDX,
* corresponding to the migration region, enable live migration support for
* the device. The migration region must contain at the beginning the migration
* registers (struct vfio_user_migration_info) and the remaining part of the
* region can be arbitrarily used by the device implementation. The region
* provided must have at least vfu_get_migr_register_area_size() bytes available
* at the start of the region (this size is guaranteed to be page-aligned). If
* mmap_areas is given, it must _not_ include this part of the region.
*
* libvfio-user offers two ways for the migration region to be used:
* 1. natively: the device implementation must handle accesses to the
* migration registers and migration data via the region callbacks. The
* semantics of these registers are explained in <linux/vfio.h>.
* 2. via the vfu_migration_callbacks_t callbacks: the device implementation
* registers a set of callbacks by calling vfu_setup_device_migration.
* The region's read/write callbacks are never called.
*
* @vfu_ctx: the libvfio-user context
* @region_idx: region index
* @size: size of the region
* @region_access: callback function to access region
* @flags: region flags (VFU_REGION_FLAG_*)
* @mmap_areas: array of memory mappable areas; if an fd is provided, but this
* is NULL, then the entire region is mappable.
* @nr_mmap_areas: number of sparse areas in @mmap_areas; must be provided if
* the @mmap_areas is non-NULL, or 0 otherwise.
* @fd: file descriptor of the file backing the region if the region is
* mappable; it is the server's responsibility to create a file suitable for
* memory mapping by the client.
* @offset: offset of the region within the fd, or zero.
*
* @returns 0 on success, -1 on error, Sets errno.
*/
int
vfu_setup_region(vfu_ctx_t *vfu_ctx, int region_idx, size_t size,
vfu_region_access_cb_t *region_access, int flags,
struct iovec *mmap_areas, uint32_t nr_mmap_areas,
int fd, uint64_t offset);
typedef enum vfu_reset_type {
/*
* Client requested a device reset (for example, as part of a guest VM
* reboot). The vfio-user context remains valid, but it's expected that all
* ongoing operations are completed or cancelled, and any device state is
* reset to a known-good initial state (including any PCI register state).
*/
VFU_RESET_DEVICE,
/*
* The vfio-user socket client connection was closed or reset. The attached
* context is cleaned up after returning from the reset callback, and
* vfu_attach_ctx() must be called to establish a new client.
*/
VFU_RESET_LOST_CONN,
/*
* Client requested to initiate PCI function level reset.
*/
VFU_RESET_PCI_FLR
} vfu_reset_type_t;
/*
* Device callback for quiescing the device.
*
* vfu_run_ctx uses this callback to request from the device to quiesce its
* operation. A quiesced device must not call vfu_addr_to_sgl() or vfu_sgl_*(),
* unless it does so from a device callback.
*
* The callback can return two values:
* 1) 0: this indicates that the device was quiesced. vfu_run_ctx then continues
* to execute and when vfu_run_ctx returns to the caller the device is
* unquiesced.
* 2) -1 with errno set to EBUSY: this indicates that the device cannot
* immediately quiesce. In this case, vfu_run_ctx returns -1 with errno
* set to EBUSY and future calls to vfu_run_ctx return the same. Until the
* device quiesces it can continue operate as normal. The device indicates
* that it quiesced by calling vfu_device_quiesced. When
* vfu_device_quiesced returns the device is no longer quiesced.
*
* A quiesced device should expect for any of the following callbacks to be
* executed: vfu_dma_register_cb_t, vfu_unregister_cb_t, vfu_reset_cb_t, and
* the migration transition callback. These callbacks are only called after the
* device has been quiesced.
*
* The following example demonstrates how a device can use the SG routines and
* friends while quiesced:
*
* A DMA region is mapped, libvfio-user calls the quiesce callback but the
* device cannot immediately quiesce:
*
* int quiesce_cb(vfu_ctx_t *vfu_ctx) {
* errno = EBUSY;
* return -1;
* }
*
* While quiescing, the device can continue to operate as normal, including
* calling functions such as vfu_sgl_get(). Then, the device finishes quiescing:
*
* vfu_quiesce_done(vfu_ctx, 0);
*
* At this point, the device must have stopped using functions like
* vfu_sgl_get(), for example by pausing any I/O threads. libvfio-user
* eventually calls the dma_register device callback before vfu_quiesce_done
* returns. In this callback the device is allowed to call functions such as
* vfu_sgl_get()
*
* void (dma_register_cb(vfu_ctx_t *vfu_ctx, vfu_dma_info_t *info) {
* vfu_sgl_get(ctx, ...);
* }
*
* Once vfu_quiesce_done returns, the device is unquiesced.
*
*
* @vfu_ctx: the libvfio-user context
*
* @returns: 0 on success, -1 on failure with errno set.
*/
typedef int (vfu_device_quiesce_cb_t)(vfu_ctx_t *vfu_ctx);
/**
* Sets up the device quiesce callback.
*
* @vfu_ctx: the libvfio-user context
* @quiesce_cb: device quiesce callback
*/
void
vfu_setup_device_quiesce_cb(vfu_ctx_t *vfu_ctx,
vfu_device_quiesce_cb_t *quiesce_cb);
/*
* Called by the device to complete a pending quiesce operation. After the
* function returns the device is unquiesced.
*
* @vfu_ctx: the libvfio-user context
* @quiesce_errno: 0 for success or errno in case the device fails to quiesce,
* in which case the operation requiring the quiesce is failed
* and the device is reset.
*
* @returns 0 on success, or -1 on failure. Sets errno.
*/
int
vfu_device_quiesced(vfu_ctx_t *vfu_ctx, int quiesce_errno);
/*
* Callback function that is called when the device must be reset.
*/
typedef int (vfu_reset_cb_t)(vfu_ctx_t *vfu_ctx, vfu_reset_type_t type);
/**
* Set up device reset callback.
*
* A reset should ensure that all on-going use of device IRQs or guest memory is
* completed or cancelled before returning from the callback.
*
* @vfu_ctx: the libvfio-user context
* @reset: device reset callback
*/
int
vfu_setup_device_reset_cb(vfu_ctx_t *vfu_ctx, vfu_reset_cb_t *reset);
/*
* Info for a guest DMA region. @iova is always valid; the other parameters
* will only be set if the guest DMA region is mappable.
*
* @iova: guest DMA range. This is the guest physical range (as we don't
* support vIOMMU) that the guest registers for DMA, via a VFIO_USER_DMA_MAP
* message, and is the address space used as input to vfu_addr_to_sgl().
* @vaddr: if the range is mapped into this process, this is the virtual address
* of the start of the region.
* @mapping: if @vaddr is non-NULL, this range represents the actual range
* mmap()ed into the process. This might be (large) page aligned, and
* therefore be different from @vaddr + @iova.iov_len.
* @page_size: if @vaddr is non-NULL, page size of the mapping (e.g. 2MB)
* @prot: if @vaddr is non-NULL, protection settings of the mapping as per
* mmap(2)
*
* For a real example, using the gpio sample server, and a qemu configured to
* use huge pages and share its memory:
*
* gpio: mapped DMA region iova=[0xf0000-0x10000000) vaddr=0x2aaaab0f0000
* page_size=0x200000 mapping=[0x2aaaab000000-0x2aaabb000000)
*
* 0xf0000 0x10000000
* | |
* v v
* +-----------------------------------+
* | Guest IOVA (DMA) space |
* +--+-----------------------------------+--+
* | | | |
* | +-----------------------------------+ |
* | ^ libvfio-user server address space |
* +--|--------------------------------------+
* ^ vaddr=0x2aaaab0f0000 ^
* | |
* 0x2aaaab000000 0x2aaabb000000
*
* This region can be directly accessed at 0x2aaaab0f0000, but the underlying
* large page mapping is in the range [0x2aaaab000000-0x2aaabb000000).
*/
typedef struct vfu_dma_info {
struct iovec iova;
void *vaddr;
struct iovec mapping;
size_t page_size;
uint32_t prot;
} vfu_dma_info_t;
/*
* Called when a guest registers one of its DMA regions via a VFIO_USER_DMA_MAP
* message.
*
* @vfu_ctx: the libvfio-user context
* @info: the DMA info
*/
typedef void (vfu_dma_register_cb_t)(vfu_ctx_t *vfu_ctx, vfu_dma_info_t *info);
/*
* Function that is called when the guest unregisters a DMA region. This
* callback is required if you want to be able to access guest memory directly
* via a mapping. The device must release all references to that region before
* the callback returns.
*
* @vfu_ctx: the libvfio-user context
* @info: the DMA info
*/
typedef void (vfu_dma_unregister_cb_t)(vfu_ctx_t *vfu_ctx, vfu_dma_info_t *info);
/**
* Set up device DMA registration callbacks. When libvfio-user is notified of a
* DMA range addition or removal, these callbacks will be invoked.
*
* If this function is not called, guest DMA regions are not accessible via
* vfu_addr_to_sgl().
*
* To directly access this DMA memory via a local mapping with vfu_sgl_get(), at
* least @dma_unregister must be provided.
*
* @vfu_ctx: the libvfio-user context
* @dma_register: DMA region registration callback (optional)
* @dma_unregister: DMA region unregistration callback (optional)
*/
int
vfu_setup_device_dma(vfu_ctx_t *vfu_ctx, vfu_dma_register_cb_t *dma_register,
vfu_dma_unregister_cb_t *dma_unregister);
enum vfu_dev_irq_type {
VFU_DEV_INTX_IRQ,
VFU_DEV_MSI_IRQ,
VFU_DEV_MSIX_IRQ,
VFU_DEV_ERR_IRQ,
VFU_DEV_REQ_IRQ,
VFU_DEV_NUM_IRQS
};
/**
* Set up device IRQ counts.
* @vfu_ctx: the libvfio-user context
* @type: IRQ type (VFU_DEV_INTX_IRQ ... VFU_DEV_REQ_IRQ)
* @count: number of irqs
*/
int
vfu_setup_device_nr_irqs(vfu_ctx_t *vfu_ctx, enum vfu_dev_irq_type type,
uint32_t count);
/*
* Function that is called when the guest masks or unmasks an IRQ vector.
*
* @vfu_ctx: the libvfio-user context
* @start: starting IRQ vector
* @count: number of vectors
* @mask: indicates if the IRQ is masked or unmasked
*/
typedef void (vfu_dev_irq_state_cb_t)(vfu_ctx_t *vfu_ctx, uint32_t start,
uint32_t count, bool mask);
/**
* Set up IRQ state change callback. When libvfio-user is notified of a
* change to IRQ state, whether masked or unmasked, it invokes
* this callback.
*
* @vfu_ctx: the libvfio-user context
* @type: IRQ type such as VFU_DEV_MSIX_IRQ - defined by vfu_dev_irq_type
* @cb: IRQ state change callback
*
* @returns 0 on success, -1 on error, sets errno.
*/
int
vfu_setup_irq_state_callback(vfu_ctx_t *vfu_ctx, enum vfu_dev_irq_type type,
vfu_dev_irq_state_cb_t *cb);
typedef enum {
VFU_MIGR_STATE_STOP,
VFU_MIGR_STATE_RUNNING,
VFU_MIGR_STATE_STOP_AND_COPY,
VFU_MIGR_STATE_PRE_COPY,
VFU_MIGR_STATE_RESUME
} vfu_migr_state_t;
#define VFU_MIGR_CALLBACKS_VERS 2
typedef struct {
/*
* Set it to VFU_MIGR_CALLBACKS_VERS.
*/
int version;
/*
* Migration state transition callback.
*
* The callback should return -1 on error, setting errno.
*
*
* TODO rename to vfu_migration_state_transition_callback
* FIXME maybe we should create a single callback and pass the state?
*/
int (*transition)(vfu_ctx_t *vfu_ctx, vfu_migr_state_t state);
/*
* Function that is called to read `count` bytes of migration data into
* `buf`. The function must return the amount of data read or -1 on error,
* setting errno. The function may return less data than requested.
*
* If the function returns zero, this is interpreted to mean that there is
* no more migration data to read.
*/
ssize_t (*read_data)(vfu_ctx_t *vfu_ctx, void *buf, uint64_t count);
/*
* Function that is called for writing previously stored device state. The
* function must return the amount of data written or -1 on error, setting
* errno. Partial writes are not supported, so any return value other than
* `count` is invalid.
*/
ssize_t (*write_data)(vfu_ctx_t *vfu_ctx, void *buf, uint64_t count);
} vfu_migration_callbacks_t;
int
vfu_setup_device_migration_callbacks(vfu_ctx_t *vfu_ctx,
const vfu_migration_callbacks_t *callbacks);
/**
* Triggers an interrupt.
*
* libvfio-user takes care of using the correct IRQ type (IRQ index: INTx or
* MSI/X), the caller only needs to specify the sub-index.
*
* @vfu_ctx: the libvfio-user context to trigger interrupt
* @subindex: vector subindex to trigger interrupt on
*
* @returns 0 on success, or -1 on failure. Sets errno.
*/
int
vfu_irq_trigger(vfu_ctx_t *vfu_ctx, uint32_t subindex);
/**
* Takes a guest physical address range and populates an array of scatter/gather
* entries than can be individually mapped in the program's virtual memory. A
* single linear guest physical address span may need to be split into multiple
* scatter/gather regions due to limitations of how memory can be mapped.
*
* vfu_setup_device_dma() must have been called prior to using this function.
*
* @vfu_ctx: the libvfio-user context
* @dma_addr: the guest physical address
* @len: size of memory to be mapped
* @sgl: array that receives the scatter/gather entries to be mapped
* @max_nr_sgs: maximum number of elements in above array
* @prot: protection as defined in <sys/mman.h>
*
* @returns the number of scatter/gather entries created on success, and on
* failure:
* -1: if the GPA address span is invalid (errno=ENOENT) or
* protection violation (errno=EACCES)
* (-x - 1): if @max_nr_sgs is too small, where x is the number of SG
* entries necessary to complete this request (errno=0).
*/
int
vfu_addr_to_sgl(vfu_ctx_t *vfu_ctx, vfu_dma_addr_t dma_addr, size_t len,
dma_sg_t *sgl, size_t max_nr_sgs, int prot);
/**
* Populate the given iovec array (accessible in the process's virtual memory),
* based upon the SGL previously built via vfu_addr_to_sgl().
* It is the caller's responsibility to return the release the iovecs via
* vfu_sgl_put().
*
* This is only supported when a @dma_unregister callback is provided to
* vfu_setup_device_dma().
*
* @vfu_ctx: the libvfio-user context
* @sgl: array of scatter/gather entries returned by vfu_addr_to_sg. These
* entries must not be modified and the array must not be deallocated
* until vfu_sgl_put() has been called.
* @iov: array of iovec structures (defined in <sys/uio.h>) to receive each
* mapping
* @cnt: number of scatter/gather entries to map
* @flags: must be 0
*
* @returns 0 on success, -1 on failure. Sets errno.
*/
int
vfu_sgl_get(vfu_ctx_t *vfu_ctx, dma_sg_t *sgl, struct iovec *iov, size_t cnt,
int flags);
/**
* Mark scatter/gather entries (previously acquired via vfu_sgl_get())
* as dirty (written to). This is only necessary if vfu_sgl_put() is not called.
*
* @vfu_ctx: the libvfio-user context
* @sg: array of scatter/gather entries to mark as dirty
* @cnt: number of scatter/gather entries to mark as dirty
*/
void
vfu_sgl_mark_dirty(vfu_ctx_t *vfu_ctx, dma_sg_t *sgl, size_t cnt);
/**
* Release the iovec array previously acquired by vfu_sgl_get().
*
* This will automatically mark the sgl as dirty if needed.
*
* @vfu_ctx: the libvfio-user context
* @sgl: array of scatter/gather entries to unmap
* @iov: array of iovec structures for each scatter/gather entry
* @cnt: number of scatter/gather entries to unmap
*/
void
vfu_sgl_put(vfu_ctx_t *vfu_ctx, dma_sg_t *sgl, struct iovec *iov, size_t cnt);
/**
* Read from the dma region exposed by the client. This can be used as an
* alternative to reading from a vfu_sgl_get() mapping, if the region is not
* directly mappable, or DMA notification callbacks have not been provided.
*
* @vfu_ctx: the libvfio-user context
* @sg: a DMA segment obtained from dma_addr_to_sg
* @data: data buffer to read into
*
* @returns 0 on success, -1 on failure. Sets errno.
*/
int
vfu_sgl_read(vfu_ctx_t *vfu_ctx, dma_sg_t *sg, size_t cnt, void *data);
/**
* Write to the dma region exposed by the client. This can be used as an
* alternative to reading from a vfu_sgl_get() mapping, if the region is not
* directly mappable, or DMA notification callbacks have not been provided.
*
* During live migration, this call does not mark any of the written pages as
* dirty; the client is expected to track this.
*
* @vfu_ctx: the libvfio-user context
* @sg: a DMA segment obtained from dma_addr_to_sg
* @data: data buffer to write
*
* @returns 0 on success, -1 on failure. Sets errno.
*/
int
vfu_sgl_write(vfu_ctx_t *vfu_ctx, dma_sg_t *sg, size_t cnt, void *data);
/*
* Supported PCI regions.
*
* Note: in VFIO, each region starts at a terabyte offset
* (VFIO_PCI_INDEX_TO_OFFSET) and because Linux supports up to 128 TB of user
* space virtual memory, there can be up to 128 device regions. PCI regions are
* fixed and in retrospect this choice has proven to be problematic because
* devices might contain potentially unused regions. New regions can now be
* positioned anywhere by using the VFIO_REGION_INFO_CAP_TYPE capability. In
* vfio-user we don't have this problem because the region index is just an
* identifier: the VMM memory maps a file descriptor that is passed to it and
* the mapping offset is derived from the mmap_areas offset value, rather than a
* static mapping from region index to offset. Thus, additional regions can
* have static indexes in vfio-user.
*/
enum {
VFU_PCI_DEV_BAR0_REGION_IDX,
VFU_PCI_DEV_BAR1_REGION_IDX,
VFU_PCI_DEV_BAR2_REGION_IDX,
VFU_PCI_DEV_BAR3_REGION_IDX,
VFU_PCI_DEV_BAR4_REGION_IDX,
VFU_PCI_DEV_BAR5_REGION_IDX,
VFU_PCI_DEV_ROM_REGION_IDX,
VFU_PCI_DEV_CFG_REGION_IDX,
VFU_PCI_DEV_VGA_REGION_IDX,
VFU_PCI_DEV_NUM_REGIONS,
};
typedef enum {
VFU_PCI_TYPE_CONVENTIONAL,
VFU_PCI_TYPE_PCI_X_1,
VFU_PCI_TYPE_PCI_X_2,
VFU_PCI_TYPE_EXPRESS
} vfu_pci_type_t;
enum {
VFU_GENERIC_DEV_MIGR_REGION_IDX,
VFU_GENERIC_DEV_NUM_REGIONS
};
/**
* Initialize the context for a PCI device. This function must be called only
* once per libvfio-user context.
*
* This function initializes a buffer for the PCI config space, accessible via
* vfu_pci_get_config_space().
*
* Returns 0 on success, or -1 on error, setting errno.
*
* @vfu_ctx: the libvfio-user context
* @pci_type: PCI type (convention PCI, PCI-X mode 1, PCI-X mode2, PCI-Express)
* @hdr_type: PCI header type. Only PCI_HEADER_TYPE_NORMAL is supported.
* @revision: PCI/PCI-X/PCIe revision
*/
int
vfu_pci_init(vfu_ctx_t *vfu_ctx, vfu_pci_type_t pci_type,
int hdr_type, int revision);
/*
* Set the Vendor ID, Device ID, Subsystem Vendor ID, and Subsystem ID fields of
* the PCI config header (PCI3 6.2.1, 6.2.4).
*
* This must always be called for PCI devices, after vfu_pci_init().
*/
void
vfu_pci_set_id(vfu_ctx_t *vfu_ctx, uint16_t vid, uint16_t did,
uint16_t ssvid, uint16_t ssid);
/*
* Set the class code fields (base, sub-class, and programming interface) of the
* PCI config header (PCI3 6.2.1).
*
* If this function is not called, the fields are initialized to zero.
*/
void
vfu_pci_set_class(vfu_ctx_t *vfu_ctx, uint8_t base, uint8_t sub, uint8_t pi);
/*
* Returns a pointer to the PCI configuration space.
*
* PCI config space consists of an initial 64-byte vfu_pci_hdr_t, plus
* additional space, containing capabilities and/or device-specific
* configuration. Standard config space is 256 bytes (PCI_CFG_SPACE_SIZE);
* extended config space is 4096 bytes (PCI_CFG_SPACE_EXP_SIZE).
*/
vfu_pci_config_space_t *
vfu_pci_get_config_space(vfu_ctx_t *vfu_ctx);
#define VFU_CAP_FLAG_EXTENDED (1 << 0)
#define VFU_CAP_FLAG_CALLBACK (1 << 1)
#define VFU_CAP_FLAG_READONLY (1 << 2)
/**
* Add a PCI capability to PCI config space.
*
* Certain standard capabilities are handled entirely within the library:
*
* PCI_CAP_ID_EXP (pxcap)
* PCI_CAP_ID_MSI (msicap)
* PCI_CAP_ID_MSIX (msixcap)
* PCI_CAP_ID_PM (pmcap)
*
* However, they must still be explicitly initialized and added here.
*
* The contents of @data are copied in. It must start with either a struct
* cap_hdr or a struct ext_cap_hdr, with the ID field set; the 'next' field is
* ignored. For PCI_CAP_ID_VNDR or PCI_EXT_CAP_ID_VNDR, the embedded size field
* must also be set; in general, any non-fixed-size capability must be
* initialized such that the size can be derived at this point.
*
* If @pos is non-zero, the capability will be placed at the given offset within
* configuration space. It must not overlap the PCI standard header, or any
* existing capability. Note that if a capability is added "out of order" in
* terms of the offset, there is no re-ordering of the capability list written
* in configuration space.
*
* If @pos is zero, the capability will be placed at a suitable offset
* automatically.
*
* The @flags field can be set as follows:
*
* VFU_CAP_FLAG_EXTENDED: this is an extended capability; supported if device is
* of PCI type VFU_PCI_TYPE_{PCI_X_2,EXPRESS}.
*
* VFU_CAP_FLAG_CALLBACK: all accesses to the capability are delegated to the
* callback for the region VFU_PCI_DEV_CFG_REGION_IDX. The callback should copy
* data into and out of the capability as needed (this could be directly on the
* config space area from vfu_pci_get_config_space()). It is not supported to
* allow writes to the initial capability header (ID/next fields).
*
* VFU_CAP_FLAG_READONLY: this prevents clients from writing to the capability.
* By default, clients are allowed to write to any part of the capability,
* excluding the initial header.
*
* Returns the offset of the capability in config space, or -1 on error, with
* errno set.
*
* @vfu_ctx: the libvfio-user context
* @pos: specific offset for the capability, or 0.
* @flags: VFU_CAP_FLAG_*
* @data: capability data, including the header
*/
ssize_t
vfu_pci_add_capability(vfu_ctx_t *vfu_ctx, size_t pos, int flags, void *data);
/**
* Find the offset within config space of a given capability (if there are
* multiple possible matches, use vfu_pci_find_next_capability()).
*
* Returns 0 if no such capability was found, with errno set.
*
* @vfu_ctx: the libvfio-user context
* @extended whether capability is an extended one or not
* @id: capability id (PCI_CAP_ID_* or PCI_EXT_CAP_ID *)
*/
size_t
vfu_pci_find_capability(vfu_ctx_t *vfu_ctx, bool extended, int cap_id);
/**
* Find the offset within config space of the given capability, starting from
* @pos, which must be the valid offset of an existing capability. This can be
* used to iterate through multiple capabilities with the same ID.
*
* Returns 0 if no more matching capabilities were found, with errno set.
*
* @vfu_ctx: the libvfio-user context
* @extended whether capability is an extended one or not
* @pos: offset within config space to start looking
* @id: capability id (PCI_CAP_ID_*)
*/
size_t
vfu_pci_find_next_capability(vfu_ctx_t *vfu_ctx, bool extended,
size_t pos, int cap_id);
bool
vfu_sg_is_mappable(vfu_ctx_t *vfu_ctx, dma_sg_t *sg);
/*
* Creates a new ioeventfd at the given setup memory region with @offset, @size,
* @fd, @flags and @datamatch.
*
* Returns 0 on success and -1 on failure with errno set.
*
* @vfu_ctx: the libvfio-user context
* @region_idx: The index of the memory region to set up the ioeventfd
* @fd: the value of the file descriptor
* @gpa_offset: The offset into the memory region
* @size: size of the ioeventfd
* @flags: Any flags to set up the ioeventfd
* @datamatch: sets the datamatch value
* @shadow_fd: File descriptor that can be mmap'ed, KVM will write there the
* otherwise discarded value when the ioeventfd is written to. If set to -1
* then a normal ioeventfd is set up instead of a shadow one. The vfio-user
* client is free to ignore this, even if it supports shadow ioeventfds.
* Requires a kernel with shadow ioeventfd support.
* Experimental, must be compiled with SHADOW_IOEVENTFD defined, otherwise
* must be -1.
* @shadow_offset: offset in shadow memory where value is written to.
*/
int
vfu_create_ioeventfd(vfu_ctx_t *vfu_ctx, uint32_t region_idx, int fd,
size_t gpa_offset, uint32_t size, uint32_t flags,
uint64_t datamatch, int shadow_fd, size_t shadow_offset);
#ifdef __cplusplus
}
#endif
#endif /* LIB_VFIO_USER_H */
/* ex: set tabstop=4 shiftwidth=4 softtabstop=4 expandtab: */