| /* SPDX-License-Identifier: BSD-3-Clause */ |
| /* |
| * Copyright (c) 2021-2022 Samuel Thibault |
| */ |
| |
| /* |
| * This simple test configures slirp and tries to ping it |
| * |
| * Note: to make this example actually be able to use the outside world, you |
| * need to either |
| * - run as root |
| * - set /proc/sys/net/ipv4/ping_group_range to allow sending ICMP echo requests |
| * - run a UDP echo server on the target |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <time.h> |
| #include <assert.h> |
| |
| #include "libslirp.h" |
| |
| //#define _WIN32 |
| #ifdef _WIN32 |
| //#include <sys/select.h> |
| #include <winsock2.h> |
| static int slirp_inet_aton(const char *cp, struct in_addr *ia) |
| { |
| uint32_t addr = inet_addr(cp); |
| if (addr == 0xffffffff) { |
| return 0; |
| } |
| ia->s_addr = addr; |
| return 1; |
| } |
| #define inet_aton slirp_inet_aton |
| #else |
| #include <sys/socket.h> |
| #include <arpa/inet.h> |
| #include <poll.h> |
| #endif |
| |
| /* Dumb simulation tick: 100ms */ |
| #define TICK 100 |
| |
| static Slirp *slirp; |
| static bool done; |
| static int64_t mytime; |
| |
| /* Print a frame for debugging */ |
| static void print_frame(const uint8_t *data, size_t len) { |
| int i; |
| |
| printf("\ngot packet size %zd:\n", len); |
| for (i = 0; i < len; i++) { |
| if (i && i % 16 == 0) |
| printf("\n"); |
| printf("%s%02x", i % 16 ? " " : "", data[i]); |
| } |
| if (len % 16 != 0) |
| printf("\n"); |
| printf("\n"); |
| } |
| |
| /* Classical 16bit checksum */ |
| static void checksum(uint8_t *data, size_t size, uint8_t *cksum) { |
| uint32_t sum = 0; |
| int i; |
| |
| cksum[0] = 0; |
| cksum[1] = 0; |
| |
| for (i = 0; i+1 < size; i += 2) |
| sum += (((uint16_t) data[i]) << 8) + data[i+1]; |
| if (i < size) /* Odd number of bytes */ |
| sum += ((uint16_t) data[i]) << 8; |
| |
| sum = (sum & 0xffff) + (sum >> 16); |
| sum = (sum & 0xffff) + (sum >> 16); |
| sum = ~sum; |
| |
| cksum[0] = sum >> 8; |
| cksum[1] = sum; |
| } |
| |
| /* This is called when receiving a packet from the virtual network, for the |
| * guest */ |
| static slirp_ssize_t send_packet(const void *buf, size_t len, void *opaque) { |
| const uint8_t *data = buf; |
| |
| assert(len >= 14); |
| |
| if (data[12] == 0x86 && |
| data[13] == 0xdd) { |
| /* Ignore IPv6 */ |
| return len; |
| } |
| |
| print_frame(data, len); |
| |
| if (data[12] == 0x08 && |
| data[13] == 0x06) { |
| /* ARP */ |
| /* We expect receiving an ARP request for our address */ |
| |
| /* Ethernet address type */ |
| assert(data[14] == 0x00); |
| assert(data[15] == 0x01); |
| |
| /* IPv4 address type */ |
| assert(data[16] == 0x08); |
| assert(data[17] == 0x00); |
| |
| /* Ethernet addresses are 6 bytes long */ |
| assert(data[18] == 0x06); |
| |
| /* IPv4 addresses are 4 bytes long */ |
| assert(data[19] == 0x04); |
| |
| /* Opcode: ARP request */ |
| assert(data[20] == 0x00); |
| assert(data[21] == 0x01); |
| |
| /* Ok, reply! */ |
| uint8_t myframe[] = { |
| /*** Ethernet ***/ |
| /* dst */ |
| 0x52, 0x55, 0x0a, 0x00, 0x02, 0x02, |
| /* src */ |
| 0x52, 0x55, 0x0a, 0x00, 0x02, 0x0e, |
| /* Type: ARP */ |
| 0x08, 0x06, |
| |
| /* ether, IPv4, */ |
| 0x00, 0x01, 0x08, 0x00, |
| /* elen, IPlen */ |
| 0x06, 0x04, |
| /* ARP reply */ |
| 0x00, 0x02, |
| |
| /* Our ethernet address */ |
| 0x52, 0x55, 0x0a, 0x00, 0x02, 0x0e, |
| /* Our IP address */ |
| 0x0a, 0x00, 0x02, 0x0e, |
| |
| /* Host ethernet address */ |
| 0x52, 0x55, 0x0a, 0x00, 0x02, 0x02, |
| /* Host IP address */ |
| 0x0a, 0x00, 0x02, 0x02, |
| }; |
| |
| slirp_input(slirp, myframe, sizeof(myframe)); |
| } |
| |
| if (data[12] == 0x08 && |
| data[13] == 0x00) { |
| /* IPv4 */ |
| assert(len >= 14 + 20); |
| |
| /* We expect receiving the ICMP echo reply for our echo request */ |
| |
| /* IPv + hlen */ |
| assert(data[14] == 0x45); |
| |
| /* proto: ICMP */ |
| assert(data[23] == 0x01); |
| |
| /* ICMP */ |
| assert(len >= 14 + 20 + 8 + 4); |
| |
| /* ICMP type: reply */ |
| assert(data[34] == 0x00); |
| |
| /* Check the data */ |
| assert(data[42] == 0xde); |
| assert(data[43] == 0xad); |
| assert(data[44] == 0xbe); |
| assert(data[45] == 0xef); |
| |
| /* Got the answer! */ |
| printf("got it!\n"); |
| done = 1; |
| } |
| |
| return len; |
| } |
| |
| static void guest_error(const char *msg, void *opaque) { |
| printf("guest error %s\n", msg); |
| } |
| |
| |
| /* |
| * Dumb timer implementation |
| */ |
| static int64_t clock_get_ns(void *opaque) { |
| return mytime; |
| } |
| |
| struct timer { |
| SlirpTimerId id; |
| void *cb_opaque; |
| int64_t expire; |
| struct timer *next; |
| }; |
| |
| static struct timer *timer_queue; |
| |
| static void *timer_new_opaque(SlirpTimerId id, void *cb_opaque, void *opaque) { |
| struct timer *new_timer = malloc(sizeof(*new_timer)); |
| new_timer->id = id; |
| new_timer->cb_opaque = cb_opaque; |
| new_timer->next = NULL; |
| return new_timer; |
| } |
| |
| static void timer_free(void *_timer, void *opaque) { |
| struct timer *timer = _timer; |
| struct timer **t; |
| |
| for (t = &timer_queue; *t != NULL; *t = (*t)->next) { |
| if (*t == timer) { |
| /* Not expired yet, drop it */ |
| *t = timer->next; |
| break; |
| } |
| } |
| |
| free(timer); |
| } |
| |
| static void timer_mod(void *_timer, int64_t expire_time, void *opaque) { |
| struct timer *timer = _timer; |
| struct timer **t; |
| |
| timer->expire = expire_time * 1000 * 1000; |
| |
| for (t = &timer_queue; *t != NULL; *t = (*t)->next) { |
| if (expire_time < (*t)->expire) |
| break; |
| } |
| |
| timer->next = *t; |
| *t = timer; |
| } |
| |
| static void timer_check(Slirp *slirp) { |
| while (timer_queue && timer_queue->expire <= mytime) |
| { |
| struct timer *t = timer_queue; |
| printf("handling %p at time %lu\n", |
| t, (unsigned long) timer_queue->expire); |
| timer_queue = t->next; |
| slirp_handle_timer(slirp, t->id, t->cb_opaque); |
| } |
| } |
| |
| static uint32_t timer_timeout(void) { |
| if (timer_queue) |
| { |
| uint32_t timeout = (timer_queue->expire - mytime) / (1000 * 1000); |
| if (timeout < TICK) |
| return timeout; |
| } |
| |
| return TICK; |
| } |
| |
| |
| /* |
| * Dumb polling implementation |
| */ |
| static int npoll; |
| static void register_poll_fd(int fd, void *opaque) { |
| /* We might want to prepare for polling on fd */ |
| npoll++; |
| } |
| |
| static void unregister_poll_fd(int fd, void *opaque) { |
| /* We might want to clear polling on fd */ |
| npoll--; |
| } |
| |
| static void notify(void *opaque) { |
| /* No need for this in single-thread case */ |
| } |
| |
| #ifdef _WIN32 |
| /* select() variant */ |
| static fd_set readfds, writefds, exceptfds; |
| static int maxfd; |
| static int add_poll_cb(int fd, int events, void *opaque) |
| { |
| if (events & SLIRP_POLL_IN) |
| FD_SET(fd, &readfds); |
| if (events & SLIRP_POLL_OUT) |
| FD_SET(fd, &writefds); |
| if (events & SLIRP_POLL_PRI) |
| FD_SET(fd, &exceptfds); |
| if (maxfd < fd) |
| maxfd = fd; |
| return fd; |
| } |
| |
| static int get_revents_cb(int idx, void *opaque) |
| { |
| int event = 0; |
| if (FD_ISSET(idx, &readfds)) |
| event |= SLIRP_POLL_IN; |
| if (FD_ISSET(idx, &writefds)) |
| event |= SLIRP_POLL_OUT; |
| if (FD_ISSET(idx, &exceptfds)) |
| event |= SLIRP_POLL_PRI; |
| return event; |
| } |
| |
| static void dopoll(uint32_t timeout) { |
| int err; |
| FD_ZERO(&readfds); |
| FD_ZERO(&writefds); |
| FD_ZERO(&exceptfds); |
| maxfd = 0; |
| |
| slirp_pollfds_fill(slirp, &timeout, add_poll_cb, NULL); |
| printf("we will use timeout %u\n", (unsigned) timeout); |
| |
| struct timeval tv = { |
| .tv_sec = timeout / 1000, |
| .tv_usec = (timeout % 1000) * 1000, |
| }; |
| err = select(maxfd+1, &readfds, &writefds, &exceptfds, &tv); |
| |
| slirp_pollfds_poll(slirp, err < 0, get_revents_cb, NULL); |
| } |
| #else |
| /* poll() variant */ |
| static struct pollfd *fds; |
| static int cur_poll; |
| static int add_poll_cb(int fd, int events, void *opaque) |
| { |
| short poll_events = 0; |
| |
| assert(cur_poll < npoll); |
| fds[cur_poll].fd = fd; |
| |
| if (events & SLIRP_POLL_IN) |
| poll_events |= POLLIN; |
| if (events & SLIRP_POLL_OUT) |
| poll_events |= POLLOUT; |
| if (events & SLIRP_POLL_PRI) |
| poll_events |= POLLPRI; |
| fds[cur_poll].events = poll_events; |
| |
| return cur_poll++; |
| } |
| |
| static int get_revents_cb(int idx, void *opaque) |
| { |
| return fds[idx].revents; |
| } |
| |
| static void dopoll(uint32_t timeout) { |
| int err; |
| fds = malloc(sizeof(*fds) * npoll); |
| cur_poll = 0; |
| |
| slirp_pollfds_fill(slirp, &timeout, add_poll_cb, NULL); |
| printf("we will use timeout %u\n", (unsigned) timeout); |
| |
| err = poll(fds, cur_poll, timeout); |
| |
| slirp_pollfds_poll(slirp, err < 0, get_revents_cb, NULL); |
| |
| free(fds); |
| } |
| #endif |
| |
| |
| static struct SlirpCb callbacks = { |
| .send_packet = send_packet, |
| .guest_error = guest_error, |
| .clock_get_ns = clock_get_ns, |
| .timer_new_opaque = timer_new_opaque, |
| .timer_free = timer_free, |
| .timer_mod = timer_mod, |
| .register_poll_fd = register_poll_fd, |
| .unregister_poll_fd = unregister_poll_fd, |
| .notify = notify, |
| }; |
| |
| |
| int main(int argc, char *argv[]) { |
| SlirpConfig config = { |
| .version = 4, |
| .restricted = false, |
| .in_enabled = true, |
| .vnetwork.s_addr = htonl(0x0a000200), |
| .vnetmask.s_addr = htonl(0xffffff00), |
| .vhost.s_addr = htonl(0x0a000202), |
| .vdhcp_start.s_addr = htonl(0x0a00020f), |
| .vnameserver.s_addr = htonl(0x0a000203), |
| .disable_host_loopback = false, |
| .enable_emu = false, |
| .disable_dns = false, |
| }; |
| uint32_t timeout = 0; |
| |
| printf("Slirp version %s\n", slirp_version_string()); |
| |
| #if !defined(_WIN32) |
| inet_pton(AF_INET6, "fec0::", &config.vprefix_addr6); |
| config.vprefix_len = 64; |
| config.vhost6 = config.vprefix_addr6; |
| config.vhost6.s6_addr[15] = 2; |
| config.vnameserver6 = config.vprefix_addr6; |
| config.vnameserver6.s6_addr[15] = 2; |
| config.in6_enabled = true, |
| #endif |
| |
| slirp = slirp_new(&config, &callbacks, NULL); |
| |
| /* Send echo request */ |
| uint8_t myframe[] = { |
| /*** Ethernet ***/ |
| /* dst */ |
| 0x52, 0x55, 0x0a, 0x00, 0x02, 0x02, |
| /* src */ |
| 0x52, 0x55, 0x0a, 0x00, 0x02, 0x0e, |
| /* Type: IPv4 */ |
| 0x08, 0x00, |
| |
| /*** IPv4 ***/ |
| /* vhl,tos, len */ |
| 0x45, 0x00, 0x00, 0x20, |
| /* id, off (DF) */ |
| 0x68, 0xd7, 0x40, 0x00, |
| /* ttl,pro, cksum */ |
| 0x40, 0x01, 0x00, 0x00, |
| /* src */ |
| 0x0a, 0x00, 0x02, 0x0e, |
| /* dst */ |
| 0x00, 0x00, 0x00, 0x00, |
| |
| /*** ICMPv4 ***/ |
| /* type, code, cksum */ |
| 0x08, 0x00, 0x00, 0x00, |
| /* id, seq */ |
| 0x01, 0xec, 0x00, 0x01, |
| /* data */ |
| 0xde, 0xad, 0xbe, 0xef, |
| }; |
| |
| struct in_addr in_addr = { .s_addr = htonl(0x0a000202) }; |
| if (argc > 1) { |
| if (inet_aton(argv[1], &in_addr) == 0) { |
| printf("usage: %s [destination IPv4 address]\n", argv[0]); |
| exit(EXIT_FAILURE); |
| } |
| } |
| uint32_t addr = ntohl(in_addr.s_addr); |
| myframe[30] = addr >> 24; |
| myframe[31] = addr >> 16; |
| myframe[32] = addr >> 8; |
| myframe[33] = addr >> 0; |
| |
| /* IPv4 header checksum */ |
| checksum(&myframe[14], 20, &myframe[24]); |
| /* ICMP header checksum */ |
| checksum(&myframe[34], 12, &myframe[36]); |
| |
| slirp_input(slirp, myframe, sizeof(myframe)); |
| |
| /* Wait for echo reply */ |
| while (!done) { |
| printf("time %lu\n", (unsigned long) mytime); |
| |
| timer_check(slirp); |
| /* Here we make the virtual time wait like the real time, but we could |
| * make it wait differently */ |
| timeout = timer_timeout(); |
| printf("we wish timeout %u\n", (unsigned) timeout); |
| |
| dopoll(timeout); |
| |
| /* Fake that the tick elapsed */ |
| mytime += TICK * 1000 * 1000; |
| } |
| |
| slirp_cleanup(slirp); |
| } |