| /* SPDX-License-Identifier: BSD-3-Clause */ |
| /* |
| * Copyright (c) 1982, 1986, 1988, 1990, 1993 |
| * The Regents of the University of California. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the University nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * @(#)tcp_subr.c 8.1 (Berkeley) 6/10/93 |
| * tcp_subr.c,v 1.5 1994/10/08 22:39:58 phk Exp |
| */ |
| |
| /* |
| * Changes and additions relating to SLiRP |
| * Copyright (c) 1995 Danny Gasparovski. |
| */ |
| |
| #include "slirp.h" |
| |
| /* patchable/settable parameters for tcp */ |
| /* Don't do rfc1323 performance enhancements */ |
| #define TCP_DO_RFC1323 0 |
| |
| /* |
| * Tcp initialization |
| */ |
| void tcp_init(Slirp *slirp) |
| { |
| slirp->tcp_iss = 1; /* wrong */ |
| slirp->tcb.so_next = slirp->tcb.so_prev = &slirp->tcb; |
| slirp->tcp_last_so = &slirp->tcb; |
| } |
| |
| void tcp_cleanup(Slirp *slirp) |
| { |
| while (slirp->tcb.so_next != &slirp->tcb) { |
| tcp_close(sototcpcb(slirp->tcb.so_next)); |
| } |
| } |
| |
| /* |
| * Create template to be used to send tcp packets on a connection. |
| * Call after host entry created, fills |
| * in a skeletal tcp/ip header, minimizing the amount of work |
| * necessary when the connection is used. |
| */ |
| void tcp_template(struct tcpcb *tp) |
| { |
| struct socket *so = tp->t_socket; |
| register struct tcpiphdr *n = &tp->t_template; |
| |
| n->ti_mbuf = NULL; |
| memset(&n->ti, 0, sizeof(n->ti)); |
| n->ti_x0 = 0; |
| switch (so->so_ffamily) { |
| case AF_INET: |
| n->ti_pr = IPPROTO_TCP; |
| n->ti_len = htons(sizeof(struct tcphdr)); |
| n->ti_src = so->so_faddr; |
| n->ti_dst = so->so_laddr; |
| n->ti_sport = so->so_fport; |
| n->ti_dport = so->so_lport; |
| break; |
| |
| case AF_INET6: |
| n->ti_nh6 = IPPROTO_TCP; |
| n->ti_len = htons(sizeof(struct tcphdr)); |
| n->ti_src6 = so->so_faddr6; |
| n->ti_dst6 = so->so_laddr6; |
| n->ti_sport = so->so_fport6; |
| n->ti_dport = so->so_lport6; |
| break; |
| |
| default: |
| g_assert_not_reached(); |
| } |
| |
| n->ti_seq = 0; |
| n->ti_ack = 0; |
| n->ti_x2 = 0; |
| n->ti_off = 5; |
| n->ti_flags = 0; |
| n->ti_win = 0; |
| n->ti_sum = 0; |
| n->ti_urp = 0; |
| } |
| |
| /* |
| * Send a single message to the TCP at address specified by |
| * the given TCP/IP header. If m == 0, then we make a copy |
| * of the tcpiphdr at ti and send directly to the addressed host. |
| * This is used to force keep alive messages out using the TCP |
| * template for a connection tp->t_template. If flags are given |
| * then we send a message back to the TCP which originated the |
| * segment ti, and discard the mbuf containing it and any other |
| * attached mbufs. |
| * |
| * In any case the ack and sequence number of the transmitted |
| * segment are as specified by the parameters. |
| */ |
| void tcp_respond(struct tcpcb *tp, struct tcpiphdr *ti, struct mbuf *m, |
| tcp_seq ack, tcp_seq seq, int flags, unsigned short af) |
| { |
| register int tlen; |
| int win = 0; |
| |
| DEBUG_CALL("tcp_respond"); |
| DEBUG_ARG("tp = %p", tp); |
| DEBUG_ARG("ti = %p", ti); |
| DEBUG_ARG("m = %p", m); |
| DEBUG_ARG("ack = %u", ack); |
| DEBUG_ARG("seq = %u", seq); |
| DEBUG_ARG("flags = %x", flags); |
| |
| if (tp) |
| win = sbspace(&tp->t_socket->so_rcv); |
| if (m == NULL) { |
| if (!tp || (m = m_get(tp->t_socket->slirp)) == NULL) |
| return; |
| tlen = 0; |
| m->m_data += IF_MAXLINKHDR; |
| *mtod(m, struct tcpiphdr *) = *ti; |
| ti = mtod(m, struct tcpiphdr *); |
| switch (af) { |
| case AF_INET: |
| ti->ti.ti_i4.ih_x1 = 0; |
| break; |
| case AF_INET6: |
| ti->ti.ti_i6.ih_x1 = 0; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| flags = TH_ACK; |
| } else { |
| /* |
| * ti points into m so the next line is just making |
| * the mbuf point to ti |
| */ |
| m->m_data = (char *)ti; |
| |
| m->m_len = sizeof(struct tcpiphdr); |
| tlen = 0; |
| #define xchg(a, b, type) \ |
| { \ |
| type t; \ |
| t = a; \ |
| a = b; \ |
| b = t; \ |
| } |
| switch (af) { |
| case AF_INET: |
| xchg(ti->ti_dst.s_addr, ti->ti_src.s_addr, uint32_t); |
| xchg(ti->ti_dport, ti->ti_sport, uint16_t); |
| break; |
| case AF_INET6: |
| xchg(ti->ti_dst6, ti->ti_src6, struct in6_addr); |
| xchg(ti->ti_dport, ti->ti_sport, uint16_t); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| #undef xchg |
| } |
| ti->ti_len = htons((uint16_t)(sizeof(struct tcphdr) + tlen)); |
| tlen += sizeof(struct tcpiphdr); |
| m->m_len = tlen; |
| |
| ti->ti_mbuf = NULL; |
| ti->ti_x0 = 0; |
| ti->ti_seq = htonl(seq); |
| ti->ti_ack = htonl(ack); |
| ti->ti_x2 = 0; |
| ti->ti_off = sizeof(struct tcphdr) >> 2; |
| ti->ti_flags = flags; |
| if (tp) |
| ti->ti_win = htons((uint16_t)(win >> tp->rcv_scale)); |
| else |
| ti->ti_win = htons((uint16_t)win); |
| ti->ti_urp = 0; |
| ti->ti_sum = 0; |
| ti->ti_sum = cksum(m, tlen); |
| |
| struct tcpiphdr tcpiph_save = *(mtod(m, struct tcpiphdr *)); |
| struct ip *ip; |
| struct ip6 *ip6; |
| |
| switch (af) { |
| case AF_INET: |
| m->m_data += |
| sizeof(struct tcpiphdr) - sizeof(struct tcphdr) - sizeof(struct ip); |
| m->m_len -= |
| sizeof(struct tcpiphdr) - sizeof(struct tcphdr) - sizeof(struct ip); |
| ip = mtod(m, struct ip *); |
| ip->ip_len = m->m_len; |
| ip->ip_dst = tcpiph_save.ti_dst; |
| ip->ip_src = tcpiph_save.ti_src; |
| ip->ip_p = tcpiph_save.ti_pr; |
| |
| if (flags & TH_RST) { |
| ip->ip_ttl = MAXTTL; |
| } else { |
| ip->ip_ttl = IPDEFTTL; |
| } |
| |
| ip_output(NULL, m); |
| break; |
| |
| case AF_INET6: |
| m->m_data += sizeof(struct tcpiphdr) - sizeof(struct tcphdr) - |
| sizeof(struct ip6); |
| m->m_len -= sizeof(struct tcpiphdr) - sizeof(struct tcphdr) - |
| sizeof(struct ip6); |
| ip6 = mtod(m, struct ip6 *); |
| ip6->ip_pl = tcpiph_save.ti_len; |
| ip6->ip_dst = tcpiph_save.ti_dst6; |
| ip6->ip_src = tcpiph_save.ti_src6; |
| ip6->ip_nh = tcpiph_save.ti_nh6; |
| |
| ip6_output(NULL, m, 0); |
| break; |
| |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| /* |
| * Create a new TCP control block, making an |
| * empty reassembly queue and hooking it to the argument |
| * protocol control block. |
| */ |
| struct tcpcb *tcp_newtcpcb(struct socket *so) |
| { |
| register struct tcpcb *tp; |
| |
| tp = g_new0(struct tcpcb, 1); |
| tp->seg_next = tp->seg_prev = (struct tcpiphdr *)tp; |
| /* |
| * 40: length of IPv4 header (20) + TCP header (20) |
| * 60: length of IPv6 header (40) + TCP header (20) |
| */ |
| tp->t_maxseg = |
| MIN(so->slirp->if_mtu - ((so->so_ffamily == AF_INET) ? 40 : 60), |
| TCP_MAXSEG_MAX); |
| |
| tp->t_flags = TCP_DO_RFC1323 ? (TF_REQ_SCALE | TF_REQ_TSTMP) : 0; |
| tp->t_socket = so; |
| |
| /* |
| * Init srtt to TCPTV_SRTTBASE (0), so we can tell that we have no |
| * rtt estimate. Set rttvar so that srtt + 2 * rttvar gives |
| * reasonable initial retransmit time. |
| */ |
| tp->t_srtt = TCPTV_SRTTBASE; |
| tp->t_rttvar = TCPTV_SRTTDFLT << 2; |
| tp->t_rttmin = TCPTV_MIN; |
| |
| TCPT_RANGESET(tp->t_rxtcur, |
| ((TCPTV_SRTTBASE >> 2) + (TCPTV_SRTTDFLT << 2)) >> 1, |
| TCPTV_MIN, TCPTV_REXMTMAX); |
| |
| tp->snd_cwnd = TCP_MAXWIN << TCP_MAX_WINSHIFT; |
| tp->snd_ssthresh = TCP_MAXWIN << TCP_MAX_WINSHIFT; |
| tp->t_state = TCPS_CLOSED; |
| |
| so->so_tcpcb = tp; |
| |
| return (tp); |
| } |
| |
| /* |
| * Drop a TCP connection, reporting |
| * the specified error. If connection is synchronized, |
| * then send a RST to peer. |
| */ |
| struct tcpcb *tcp_drop(struct tcpcb *tp, int err) |
| { |
| DEBUG_CALL("tcp_drop"); |
| DEBUG_ARG("tp = %p", tp); |
| DEBUG_ARG("errno = %d", errno); |
| |
| if (TCPS_HAVERCVDSYN(tp->t_state)) { |
| tp->t_state = TCPS_CLOSED; |
| tcp_output(tp); |
| } |
| return (tcp_close(tp)); |
| } |
| |
| /* |
| * Close a TCP control block: |
| * discard all space held by the tcp |
| * discard internet protocol block |
| * wake up any sleepers |
| */ |
| struct tcpcb *tcp_close(struct tcpcb *tp) |
| { |
| register struct tcpiphdr *t; |
| struct socket *so = tp->t_socket; |
| Slirp *slirp = so->slirp; |
| register struct mbuf *m; |
| |
| DEBUG_CALL("tcp_close"); |
| DEBUG_ARG("tp = %p", tp); |
| |
| /* free the reassembly queue, if any */ |
| t = tcpfrag_list_first(tp); |
| while (!tcpfrag_list_end(t, tp)) { |
| t = tcpiphdr_next(t); |
| m = tcpiphdr_prev(t)->ti_mbuf; |
| remque(tcpiphdr2qlink(tcpiphdr_prev(t))); |
| m_free(m); |
| } |
| g_free(tp); |
| so->so_tcpcb = NULL; |
| /* clobber input socket cache if we're closing the cached connection */ |
| if (so == slirp->tcp_last_so) |
| slirp->tcp_last_so = &slirp->tcb; |
| so->slirp->cb->unregister_poll_fd(so->s, so->slirp->opaque); |
| closesocket(so->s); |
| sbfree(&so->so_rcv); |
| sbfree(&so->so_snd); |
| sofree(so); |
| return ((struct tcpcb *)0); |
| } |
| |
| /* |
| * TCP protocol interface to socket abstraction. |
| */ |
| |
| /* |
| * User issued close, and wish to trail through shutdown states: |
| * if never received SYN, just forget it. If got a SYN from peer, |
| * but haven't sent FIN, then go to FIN_WAIT_1 state to send peer a FIN. |
| * If already got a FIN from peer, then almost done; go to LAST_ACK |
| * state. In all other cases, have already sent FIN to peer (e.g. |
| * after PRU_SHUTDOWN), and just have to play tedious game waiting |
| * for peer to send FIN or not respond to keep-alives, etc. |
| * We can let the user exit from the close as soon as the FIN is acked. |
| */ |
| void tcp_sockclosed(struct tcpcb *tp) |
| { |
| DEBUG_CALL("tcp_sockclosed"); |
| DEBUG_ARG("tp = %p", tp); |
| |
| if (!tp) { |
| return; |
| } |
| |
| switch (tp->t_state) { |
| case TCPS_CLOSED: |
| case TCPS_LISTEN: |
| case TCPS_SYN_SENT: |
| tp->t_state = TCPS_CLOSED; |
| tcp_close(tp); |
| return; |
| |
| case TCPS_SYN_RECEIVED: |
| case TCPS_ESTABLISHED: |
| tp->t_state = TCPS_FIN_WAIT_1; |
| break; |
| |
| case TCPS_CLOSE_WAIT: |
| tp->t_state = TCPS_LAST_ACK; |
| break; |
| } |
| tcp_output(tp); |
| } |
| |
| /* |
| * Connect to a host on the Internet |
| * Called by tcp_input |
| * Only do a connect, the tcp fields will be set in tcp_input |
| * return 0 if there's a result of the connect, |
| * else return -1 means we're still connecting |
| * The return value is almost always -1 since the socket is |
| * nonblocking. Connect returns after the SYN is sent, and does |
| * not wait for ACK+SYN. |
| */ |
| int tcp_fconnect(struct socket *so, unsigned short af) |
| { |
| int ret = 0; |
| |
| DEBUG_CALL("tcp_fconnect"); |
| DEBUG_ARG("so = %p", so); |
| |
| ret = so->s = slirp_socket(af, SOCK_STREAM, 0); |
| if (ret >= 0) { |
| ret = slirp_bind_outbound(so, af); |
| if (ret < 0) { |
| // bind failed - close socket |
| closesocket(so->s); |
| so->s = -1; |
| return (ret); |
| } |
| } |
| |
| if (ret >= 0) { |
| int opt, s = so->s; |
| struct sockaddr_storage addr; |
| |
| slirp_set_nonblock(s); |
| so->slirp->cb->register_poll_fd(s, so->slirp->opaque); |
| slirp_socket_set_fast_reuse(s); |
| opt = 1; |
| setsockopt(s, SOL_SOCKET, SO_OOBINLINE, &opt, sizeof(opt)); |
| opt = 1; |
| setsockopt(s, IPPROTO_TCP, TCP_NODELAY, &opt, sizeof(opt)); |
| |
| addr = so->fhost.ss; |
| DEBUG_CALL(" connect()ing"); |
| if (sotranslate_out(so, &addr) < 0) { |
| return -1; |
| } |
| |
| /* We don't care what port we get */ |
| ret = connect(s, (struct sockaddr *)&addr, sockaddr_size(&addr)); |
| |
| /* |
| * If it's not in progress, it failed, so we just return 0, |
| * without clearing SS_NOFDREF |
| */ |
| soisfconnecting(so); |
| } |
| |
| return (ret); |
| } |
| |
| /* |
| * Accept the socket and connect to the local-host |
| * |
| * We have a problem. The correct thing to do would be |
| * to first connect to the local-host, and only if the |
| * connection is accepted, then do an accept() here. |
| * But, a) we need to know who's trying to connect |
| * to the socket to be able to SYN the local-host, and |
| * b) we are already connected to the foreign host by |
| * the time it gets to accept(), so... We simply accept |
| * here and SYN the local-host. |
| */ |
| void tcp_connect(struct socket *inso) |
| { |
| Slirp *slirp = inso->slirp; |
| struct socket *so; |
| struct sockaddr_storage addr; |
| socklen_t addrlen = sizeof(struct sockaddr_storage); |
| struct tcpcb *tp; |
| int s, opt; |
| |
| DEBUG_CALL("tcp_connect"); |
| DEBUG_ARG("inso = %p", inso); |
| |
| /* |
| * If it's an SS_ACCEPTONCE socket, no need to socreate() |
| * another socket, just use the accept() socket. |
| */ |
| if (inso->so_state & SS_FACCEPTONCE) { |
| /* FACCEPTONCE already have a tcpcb */ |
| so = inso; |
| } else { |
| so = socreate(slirp); |
| tcp_attach(so); |
| so->lhost = inso->lhost; |
| so->so_ffamily = inso->so_ffamily; |
| } |
| |
| tcp_mss(sototcpcb(so), 0); |
| |
| s = accept(inso->s, (struct sockaddr *)&addr, &addrlen); |
| if (s < 0) { |
| tcp_close(sototcpcb(so)); /* This will sofree() as well */ |
| return; |
| } |
| slirp_set_nonblock(s); |
| so->slirp->cb->register_poll_fd(s, so->slirp->opaque); |
| slirp_socket_set_fast_reuse(s); |
| opt = 1; |
| setsockopt(s, SOL_SOCKET, SO_OOBINLINE, &opt, sizeof(int)); |
| slirp_socket_set_nodelay(s); |
| |
| so->fhost.ss = addr; |
| sotranslate_accept(so); |
| |
| /* Close the accept() socket, set right state */ |
| if (inso->so_state & SS_FACCEPTONCE) { |
| /* If we only accept once, close the accept() socket */ |
| so->slirp->cb->unregister_poll_fd(so->s, so->slirp->opaque); |
| closesocket(so->s); |
| |
| /* Don't select it yet, even though we have an FD */ |
| /* if it's not FACCEPTONCE, it's already NOFDREF */ |
| so->so_state = SS_NOFDREF; |
| } |
| so->s = s; |
| so->so_state |= SS_INCOMING; |
| |
| so->so_iptos = tcp_tos(so); |
| tp = sototcpcb(so); |
| |
| tcp_template(tp); |
| |
| tp->t_state = TCPS_SYN_SENT; |
| tp->t_timer[TCPT_KEEP] = TCPTV_KEEP_INIT; |
| tp->iss = slirp->tcp_iss; |
| slirp->tcp_iss += TCP_ISSINCR / 2; |
| tcp_sendseqinit(tp); |
| tcp_output(tp); |
| } |
| |
| /* |
| * Attach a TCPCB to a socket. |
| */ |
| void tcp_attach(struct socket *so) |
| { |
| so->so_tcpcb = tcp_newtcpcb(so); |
| insque(so, &so->slirp->tcb); |
| } |
| |
| /* |
| * Set the socket's type of service field |
| */ |
| static const struct tos_t tcptos[] = { |
| { 0, 20, IPTOS_THROUGHPUT, 0 }, /* ftp data */ |
| { 21, 21, IPTOS_LOWDELAY, EMU_FTP }, /* ftp control */ |
| { 0, 23, IPTOS_LOWDELAY, 0 }, /* telnet */ |
| { 0, 80, IPTOS_THROUGHPUT, 0 }, /* WWW */ |
| { 0, 513, IPTOS_LOWDELAY, EMU_RLOGIN | EMU_NOCONNECT }, /* rlogin */ |
| { 0, 544, IPTOS_LOWDELAY, EMU_KSH }, /* kshell */ |
| { 0, 543, IPTOS_LOWDELAY, 0 }, /* klogin */ |
| { 0, 6667, IPTOS_THROUGHPUT, EMU_IRC }, /* IRC */ |
| { 0, 6668, IPTOS_THROUGHPUT, EMU_IRC }, /* IRC undernet */ |
| { 0, 7070, IPTOS_LOWDELAY, EMU_REALAUDIO }, /* RealAudio control */ |
| { 0, 113, IPTOS_LOWDELAY, EMU_IDENT }, /* identd protocol */ |
| { 0, 0, 0, 0 } |
| }; |
| |
| /* |
| * Return TOS according to the above table |
| */ |
| uint8_t tcp_tos(struct socket *so) |
| { |
| int i = 0; |
| |
| while (tcptos[i].tos) { |
| if ((tcptos[i].fport && (ntohs(so->so_fport) == tcptos[i].fport)) || |
| (tcptos[i].lport && (ntohs(so->so_lport) == tcptos[i].lport))) { |
| if (so->slirp->enable_emu) |
| so->so_emu = tcptos[i].emu; |
| return tcptos[i].tos; |
| } |
| i++; |
| } |
| return 0; |
| } |
| |
| /* |
| * Emulate programs that try and connect to us |
| * This includes ftp (the data connection is |
| * initiated by the server) and IRC (DCC CHAT and |
| * DCC SEND) for now |
| * |
| * NOTE: It's possible to crash SLiRP by sending it |
| * unstandard strings to emulate... if this is a problem, |
| * more checks are needed here |
| * |
| * XXX Assumes the whole command came in one packet |
| * XXX If there is more than one command in the packet, the others may |
| * be truncated. |
| * XXX If the command is too long, it may be truncated. |
| * |
| * XXX Some ftp clients will have their TOS set to |
| * LOWDELAY and so Nagel will kick in. Because of this, |
| * we'll get the first letter, followed by the rest, so |
| * we simply scan for ORT instead of PORT... |
| * DCC doesn't have this problem because there's other stuff |
| * in the packet before the DCC command. |
| * |
| * Return 1 if the mbuf m is still valid and should be |
| * sbappend()ed |
| * |
| * NOTE: if you return 0 you MUST m_free() the mbuf! |
| */ |
| int tcp_emu(struct socket *so, struct mbuf *m) |
| { |
| Slirp *slirp = so->slirp; |
| unsigned n1, n2, n3, n4, n5, n6; |
| char buff[257]; |
| uint32_t laddr; |
| unsigned lport; |
| char *bptr; |
| |
| DEBUG_CALL("tcp_emu"); |
| DEBUG_ARG("so = %p", so); |
| DEBUG_ARG("m = %p", m); |
| |
| switch (so->so_emu) { |
| int x, i; |
| |
| /* TODO: IPv6 */ |
| case EMU_IDENT: |
| /* |
| * Identification protocol as per rfc-1413 |
| */ |
| |
| { |
| struct socket *tmpso; |
| struct sockaddr_in addr; |
| socklen_t addrlen = sizeof(struct sockaddr_in); |
| char *eol = g_strstr_len(m->m_data, m->m_len, "\r\n"); |
| |
| if (!eol) { |
| return 1; |
| } |
| |
| *eol = '\0'; |
| if (sscanf(m->m_data, "%u%*[ ,]%u", &n1, &n2) == 2) { |
| HTONS(n1); |
| HTONS(n2); |
| /* n2 is the one on our host */ |
| for (tmpso = slirp->tcb.so_next; tmpso != &slirp->tcb; |
| tmpso = tmpso->so_next) { |
| if (tmpso->so_laddr.s_addr == so->so_laddr.s_addr && |
| tmpso->so_lport == n2 && |
| tmpso->so_faddr.s_addr == so->so_faddr.s_addr && |
| tmpso->so_fport == n1) { |
| if (getsockname(tmpso->s, (struct sockaddr *)&addr, |
| &addrlen) == 0) |
| n2 = addr.sin_port; |
| break; |
| } |
| } |
| NTOHS(n1); |
| NTOHS(n2); |
| m_inc(m, g_snprintf(NULL, 0, "%d,%d\r\n", n1, n2) + 1); |
| m->m_len = slirp_fmt(m->m_data, M_ROOM(m), "%d,%d\r\n", n1, n2); |
| } else { |
| *eol = '\r'; |
| } |
| |
| return 1; |
| } |
| |
| case EMU_FTP: /* ftp */ |
| m_inc(m, m->m_len + 1); |
| *(m->m_data + m->m_len) = 0; /* NUL terminate for strstr */ |
| if ((bptr = (char *)strstr(m->m_data, "ORT")) != NULL) { |
| /* |
| * Need to emulate the PORT command |
| */ |
| x = sscanf(bptr, "ORT %u,%u,%u,%u,%u,%u\r\n%256[^\177]", &n1, &n2, |
| &n3, &n4, &n5, &n6, buff); |
| if (x < 6) |
| return 1; |
| |
| laddr = htonl((n1 << 24) | (n2 << 16) | (n3 << 8) | (n4)); |
| lport = htons((n5 << 8) | (n6)); |
| |
| if ((so = tcp_listen(slirp, INADDR_ANY, 0, laddr, lport, |
| SS_FACCEPTONCE)) == NULL) { |
| return 1; |
| } |
| n6 = ntohs(so->so_fport); |
| |
| n5 = (n6 >> 8) & 0xff; |
| n6 &= 0xff; |
| |
| laddr = ntohl(so->so_faddr.s_addr); |
| |
| n1 = ((laddr >> 24) & 0xff); |
| n2 = ((laddr >> 16) & 0xff); |
| n3 = ((laddr >> 8) & 0xff); |
| n4 = (laddr & 0xff); |
| |
| m->m_len = bptr - m->m_data; /* Adjust length */ |
| m->m_len += slirp_fmt(bptr, M_FREEROOM(m), |
| "ORT %d,%d,%d,%d,%d,%d\r\n%s", |
| n1, n2, n3, n4, n5, n6, x == 7 ? buff : ""); |
| return 1; |
| } else if ((bptr = (char *)strstr(m->m_data, "27 Entering")) != NULL) { |
| /* |
| * Need to emulate the PASV response |
| */ |
| x = sscanf( |
| bptr, |
| "27 Entering Passive Mode (%u,%u,%u,%u,%u,%u)\r\n%256[^\177]", |
| &n1, &n2, &n3, &n4, &n5, &n6, buff); |
| if (x < 6) |
| return 1; |
| |
| laddr = htonl((n1 << 24) | (n2 << 16) | (n3 << 8) | (n4)); |
| lport = htons((n5 << 8) | (n6)); |
| |
| if ((so = tcp_listen(slirp, INADDR_ANY, 0, laddr, lport, |
| SS_FACCEPTONCE)) == NULL) { |
| return 1; |
| } |
| n6 = ntohs(so->so_fport); |
| |
| n5 = (n6 >> 8) & 0xff; |
| n6 &= 0xff; |
| |
| laddr = ntohl(so->so_faddr.s_addr); |
| |
| n1 = ((laddr >> 24) & 0xff); |
| n2 = ((laddr >> 16) & 0xff); |
| n3 = ((laddr >> 8) & 0xff); |
| n4 = (laddr & 0xff); |
| |
| m->m_len = bptr - m->m_data; /* Adjust length */ |
| m->m_len += slirp_fmt(bptr, M_FREEROOM(m), |
| "27 Entering Passive Mode (%d,%d,%d,%d,%d,%d)\r\n%s", |
| n1, n2, n3, n4, n5, n6, x == 7 ? buff : ""); |
| return 1; |
| } |
| |
| return 1; |
| |
| case EMU_KSH: |
| /* |
| * The kshell (Kerberos rsh) and shell services both pass |
| * a local port port number to carry signals to the server |
| * and stderr to the client. It is passed at the beginning |
| * of the connection as a NUL-terminated decimal ASCII string. |
| */ |
| so->so_emu = 0; |
| for (lport = 0, i = 0; i < m->m_len - 1; ++i) { |
| if (m->m_data[i] < '0' || m->m_data[i] > '9') |
| return 1; /* invalid number */ |
| lport *= 10; |
| lport += m->m_data[i] - '0'; |
| } |
| if (m->m_data[m->m_len - 1] == '\0' && lport != 0 && |
| (so = tcp_listen(slirp, INADDR_ANY, 0, so->so_laddr.s_addr, |
| htons(lport), SS_FACCEPTONCE)) != NULL) |
| m->m_len = slirp_fmt0(m->m_data, M_ROOM(m), |
| "%d", ntohs(so->so_fport)); |
| return 1; |
| |
| case EMU_IRC: |
| /* |
| * Need to emulate DCC CHAT, DCC SEND and DCC MOVE |
| */ |
| m_inc(m, m->m_len + 1); |
| *(m->m_data + m->m_len) = 0; /* NULL terminate the string for strstr */ |
| if ((bptr = (char *)strstr(m->m_data, "DCC")) == NULL) |
| return 1; |
| |
| /* The %256s is for the broken mIRC */ |
| if (sscanf(bptr, "DCC CHAT %256s %u %u", buff, &laddr, &lport) == 3) { |
| if ((so = tcp_listen(slirp, INADDR_ANY, 0, htonl(laddr), |
| htons(lport), SS_FACCEPTONCE)) == NULL) { |
| return 1; |
| } |
| m->m_len = bptr - m->m_data; /* Adjust length */ |
| m->m_len += slirp_fmt(bptr, M_FREEROOM(m), |
| "DCC CHAT chat %lu %u%c\n", |
| (unsigned long)ntohl(so->so_faddr.s_addr), |
| ntohs(so->so_fport), 1); |
| } else if (sscanf(bptr, "DCC SEND %256s %u %u %u", buff, &laddr, &lport, |
| &n1) == 4) { |
| if ((so = tcp_listen(slirp, INADDR_ANY, 0, htonl(laddr), |
| htons(lport), SS_FACCEPTONCE)) == NULL) { |
| return 1; |
| } |
| m->m_len = bptr - m->m_data; /* Adjust length */ |
| m->m_len += slirp_fmt(bptr, M_FREEROOM(m), |
| "DCC SEND %s %lu %u %u%c\n", buff, |
| (unsigned long)ntohl(so->so_faddr.s_addr), |
| ntohs(so->so_fport), n1, 1); |
| } else if (sscanf(bptr, "DCC MOVE %256s %u %u %u", buff, &laddr, &lport, |
| &n1) == 4) { |
| if ((so = tcp_listen(slirp, INADDR_ANY, 0, htonl(laddr), |
| htons(lport), SS_FACCEPTONCE)) == NULL) { |
| return 1; |
| } |
| m->m_len = bptr - m->m_data; /* Adjust length */ |
| m->m_len += slirp_fmt(bptr, M_FREEROOM(m), |
| "DCC MOVE %s %lu %u %u%c\n", buff, |
| (unsigned long)ntohl(so->so_faddr.s_addr), |
| ntohs(so->so_fport), n1, 1); |
| } |
| return 1; |
| |
| case EMU_REALAUDIO: |
| /* |
| * RealAudio emulation - JP. We must try to parse the incoming |
| * data and try to find the two characters that contain the |
| * port number. Then we redirect an udp port and replace the |
| * number with the real port we got. |
| * |
| * The 1.0 beta versions of the player are not supported |
| * any more. |
| * |
| * A typical packet for player version 1.0 (release version): |
| * |
| * 0000:50 4E 41 00 05 |
| * 0000:00 01 00 02 1B D7 00 00 67 E6 6C DC 63 00 12 50 ........g.l.c..P |
| * 0010:4E 43 4C 49 45 4E 54 20 31 30 31 20 41 4C 50 48 NCLIENT 101 ALPH |
| * 0020:41 6C 00 00 52 00 17 72 61 66 69 6C 65 73 2F 76 Al..R..rafiles/v |
| * 0030:6F 61 2F 65 6E 67 6C 69 73 68 5F 2E 72 61 79 42 oa/english_.rayB |
| * |
| * Now the port number 0x1BD7 is found at offset 0x04 of the |
| * Now the port number 0x1BD7 is found at offset 0x04 of the |
| * second packet. This time we received five bytes first and |
| * then the rest. You never know how many bytes you get. |
| * |
| * A typical packet for player version 2.0 (beta): |
| * |
| * 0000:50 4E 41 00 06 00 02 00 00 00 01 00 02 1B C1 00 PNA............. |
| * 0010:00 67 75 78 F5 63 00 0A 57 69 6E 32 2E 30 2E 30 .gux.c..Win2.0.0 |
| * 0020:2E 35 6C 00 00 52 00 1C 72 61 66 69 6C 65 73 2F .5l..R..rafiles/ |
| * 0030:77 65 62 73 69 74 65 2F 32 30 72 65 6C 65 61 73 website/20releas |
| * 0040:65 2E 72 61 79 53 00 00 06 36 42 e.rayS...6B |
| * |
| * Port number 0x1BC1 is found at offset 0x0d. |
| * |
| * This is just a horrible switch statement. Variable ra tells |
| * us where we're going. |
| */ |
| |
| bptr = m->m_data; |
| while (bptr < m->m_data + m->m_len) { |
| uint16_t p; |
| static int ra = 0; |
| char ra_tbl[4]; |
| |
| ra_tbl[0] = 0x50; |
| ra_tbl[1] = 0x4e; |
| ra_tbl[2] = 0x41; |
| ra_tbl[3] = 0; |
| |
| switch (ra) { |
| case 0: |
| case 2: |
| case 3: |
| if (*bptr++ != ra_tbl[ra]) { |
| ra = 0; |
| continue; |
| } |
| break; |
| |
| case 1: |
| /* |
| * We may get 0x50 several times, ignore them |
| */ |
| if (*bptr == 0x50) { |
| ra = 1; |
| bptr++; |
| continue; |
| } else if (*bptr++ != ra_tbl[ra]) { |
| ra = 0; |
| continue; |
| } |
| break; |
| |
| case 4: |
| /* |
| * skip version number |
| */ |
| bptr++; |
| break; |
| |
| case 5: |
| if (bptr == m->m_data + m->m_len - 1) |
| return 1; /* We need two bytes */ |
| |
| /* |
| * The difference between versions 1.0 and |
| * 2.0 is here. For future versions of |
| * the player this may need to be modified. |
| */ |
| if (*(bptr + 1) == 0x02) |
| bptr += 8; |
| else |
| bptr += 4; |
| break; |
| |
| case 6: |
| /* This is the field containing the port |
| * number that RA-player is listening to. |
| */ |
| |
| if (bptr == m->m_data + m->m_len - 1) |
| return 1; /* We need two bytes */ |
| |
| lport = (((uint8_t *)bptr)[0] << 8) + ((uint8_t *)bptr)[1]; |
| if (lport < 6970) |
| lport += 256; /* don't know why */ |
| if (lport < 6970 || lport > 7170) |
| return 1; /* failed */ |
| |
| /* try to get udp port between 6970 - 7170 */ |
| for (p = 6970; p < 7071; p++) { |
| if (udp_listen(slirp, INADDR_ANY, htons(p), |
| so->so_laddr.s_addr, htons(lport), |
| SS_FACCEPTONCE)) { |
| break; |
| } |
| } |
| if (p == 7071) |
| p = 0; |
| *(uint8_t *)bptr++ = (p >> 8) & 0xff; |
| *(uint8_t *)bptr = p & 0xff; |
| ra = 0; |
| return 1; /* port redirected, we're done */ |
| break; |
| |
| default: |
| ra = 0; |
| } |
| ra++; |
| } |
| return 1; |
| |
| default: |
| /* Ooops, not emulated, won't call tcp_emu again */ |
| so->so_emu = 0; |
| return 1; |
| } |
| } |
| |
| /* |
| * Do misc. config of SLiRP while its running. |
| * Return 0 if this connections is to be closed, 1 otherwise, |
| * return 2 if this is a command-line connection |
| */ |
| int tcp_ctl(struct socket *so) |
| { |
| Slirp *slirp = so->slirp; |
| struct sbuf *sb = &so->so_snd; |
| struct gfwd_list *ex_ptr; |
| |
| DEBUG_CALL("tcp_ctl"); |
| DEBUG_ARG("so = %p", so); |
| |
| /* TODO: IPv6 */ |
| if (so->so_faddr.s_addr != slirp->vhost_addr.s_addr) { |
| /* Check if it's pty_exec */ |
| for (ex_ptr = slirp->guestfwd_list; ex_ptr; ex_ptr = ex_ptr->ex_next) { |
| if (ex_ptr->ex_fport == so->so_fport && |
| so->so_faddr.s_addr == ex_ptr->ex_addr.s_addr) { |
| if (ex_ptr->write_cb) { |
| so->s = -1; |
| so->guestfwd = ex_ptr; |
| return 1; |
| } |
| DEBUG_MISC(" executing %s", ex_ptr->ex_exec); |
| if (ex_ptr->ex_unix) |
| return open_unix(so, ex_ptr->ex_unix); |
| else |
| return fork_exec(so, ex_ptr->ex_exec); |
| } |
| } |
| } |
| sb->sb_cc = slirp_fmt(sb->sb_wptr, sb->sb_datalen - (sb->sb_wptr - sb->sb_data), |
| "Error: No application configured.\r\n"); |
| sb->sb_wptr += sb->sb_cc; |
| return 0; |
| } |