blob: b6bcb18b477b8238fa668c52fbd10e7acaa555dd [file] [log] [blame]
/*
* Copyright (C) 2007 Michael Brown <mbrown@fensystems.co.uk>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
* You can also choose to distribute this program under the terms of
* the Unmodified Binary Distribution Licence (as given in the file
* COPYING.UBDL), provided that you have satisfied its requirements.
*/
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
/**
* @file
*
* PXE image format
*
*/
#include <pxe.h>
#include <pxe_call.h>
#include <pic8259.h>
#include <ipxe/uaccess.h>
#include <ipxe/image.h>
#include <ipxe/segment.h>
#include <ipxe/netdevice.h>
#include <ipxe/features.h>
#include <ipxe/console.h>
#include <ipxe/efi/efi.h>
#include <ipxe/efi/IndustryStandard/PeImage.h>
FEATURE ( FEATURE_IMAGE, "PXE", DHCP_EB_FEATURE_PXE, 1 );
/** PXE command line */
const char *pxe_cmdline;
/**
* Execute PXE image
*
* @v image PXE image
* @ret rc Return status code
*/
static int pxe_exec ( struct image *image ) {
userptr_t buffer = real_to_user ( 0, 0x7c00 );
struct net_device *netdev;
int rc;
/* Verify and prepare segment */
if ( ( rc = prep_segment ( buffer, image->len, image->len ) ) != 0 ) {
DBGC ( image, "IMAGE %p could not prepare segment: %s\n",
image, strerror ( rc ) );
return rc;
}
/* Copy image to segment */
memcpy_user ( buffer, 0, image->data, 0, image->len );
/* Arbitrarily pick the most recently opened network device */
if ( ( netdev = last_opened_netdev() ) == NULL ) {
DBGC ( image, "IMAGE %p could not locate PXE net device\n",
image );
return -ENODEV;
}
netdev_get ( netdev );
/* Activate PXE */
pxe_activate ( netdev );
/* Construct fake DHCP packets */
pxe_fake_cached_info();
/* Set PXE command line */
pxe_cmdline = image->cmdline;
/* Reset console since PXE NBP will probably use it */
console_reset();
/* Disable IRQ, if applicable */
if ( netdev_irq_supported ( netdev ) && netdev->dev->desc.irq )
disable_irq ( netdev->dev->desc.irq );
/* Start PXE NBP */
rc = pxe_start_nbp();
/* Clear PXE command line */
pxe_cmdline = NULL;
/* Deactivate PXE */
pxe_deactivate();
/* Try to reopen network device. Ignore errors, since the NBP
* may have called PXENV_STOP_UNDI.
*/
netdev_open ( netdev );
netdev_put ( netdev );
return rc;
}
/**
* Probe PXE image
*
* @v image PXE file
* @ret rc Return status code
*/
int pxe_probe ( struct image *image ) {
/* Images too large to fit in base memory cannot be PXE
* images. We include this check to help prevent unrecognised
* images from being marked as PXE images, since PXE images
* have no signature we can check against.
*/
if ( image->len > ( 0xa0000 - 0x7c00 ) )
return -ENOEXEC;
/* Rejecting zero-length images is also useful, since these
* end up looking to the user like bugs in iPXE.
*/
if ( ! image->len )
return -ENOEXEC;
return 0;
}
/**
* Probe PXE image (with rejection of potential EFI images)
*
* @v image PXE file
* @ret rc Return status code
*/
int pxe_probe_no_mz ( struct image *image ) {
uint16_t magic;
int rc;
/* Probe PXE image */
if ( ( rc = pxe_probe ( image ) ) != 0 )
return rc;
/* Reject image with an "MZ" signature which may indicate an
* EFI image incorrectly handed out to a BIOS system.
*/
if ( image->len >= sizeof ( magic ) ) {
copy_from_user ( &magic, image->data, 0, sizeof ( magic ) );
if ( magic == cpu_to_le16 ( EFI_IMAGE_DOS_SIGNATURE ) ) {
DBGC ( image, "IMAGE %p may be an EFI image\n",
image );
return -ENOTTY;
}
}
return 0;
}
/** PXE image type */
struct image_type pxe_image_type[] __image_type ( PROBE_PXE ) = {
{
.name = "PXE-NBP",
.probe = pxe_probe_no_mz,
.exec = pxe_exec,
},
{
.name = "PXE-NBP (may be EFI?)",
.probe = pxe_probe,
.exec = pxe_exec,
},
};