| /* |
| * Copyright (C) 2018 Sylvie Barlow <sylvie.c.barlow@gmail.com>. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| * |
| * You can also choose to distribute this program under the terms of |
| * the Unmodified Binary Distribution Licence (as given in the file |
| * COPYING.UBDL), provided that you have satisfied its requirements. |
| */ |
| |
| FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ); |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <errno.h> |
| #include <byteswap.h> |
| #include <ipxe/netdevice.h> |
| #include <ipxe/ethernet.h> |
| #include <ipxe/if_ether.h> |
| #include <ipxe/iobuf.h> |
| #include <ipxe/malloc.h> |
| #include <ipxe/pci.h> |
| #include "icplus.h" |
| |
| /** @file |
| * |
| * IC+ network driver |
| * |
| */ |
| |
| /****************************************************************************** |
| * |
| * Device reset |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Reset hardware |
| * |
| * @v icp IC+ device |
| * @ret rc Return status code |
| */ |
| static int icplus_reset ( struct icplus_nic *icp ) { |
| uint32_t asicctrl; |
| unsigned int i; |
| |
| /* Trigger reset */ |
| writel ( ( ICP_ASICCTRL_GLOBALRESET | ICP_ASICCTRL_DMA | |
| ICP_ASICCTRL_FIFO | ICP_ASICCTRL_NETWORK | ICP_ASICCTRL_HOST | |
| ICP_ASICCTRL_AUTOINIT ), ( icp->regs + ICP_ASICCTRL ) ); |
| |
| /* Wait for reset to complete */ |
| for ( i = 0 ; i < ICP_RESET_MAX_WAIT_MS ; i++ ) { |
| |
| /* Check if device is ready */ |
| asicctrl = readl ( icp->regs + ICP_ASICCTRL ); |
| if ( ! ( asicctrl & ICP_ASICCTRL_RESETBUSY ) ) |
| return 0; |
| |
| /* Delay */ |
| mdelay ( 1 ); |
| } |
| |
| DBGC ( icp, "ICPLUS %p timed out waiting for reset (asicctrl %#08x)\n", |
| icp, asicctrl ); |
| return -ETIMEDOUT; |
| } |
| |
| /****************************************************************************** |
| * |
| * EEPROM interface |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Read data from EEPROM |
| * |
| * @v nvs NVS device |
| * @v address Address from which to read |
| * @v data Data buffer |
| * @v len Length of data buffer |
| * @ret rc Return status code |
| */ |
| static int icplus_read_eeprom ( struct nvs_device *nvs, unsigned int address, |
| void *data, size_t len ) { |
| struct icplus_nic *icp = |
| container_of ( nvs, struct icplus_nic, eeprom ); |
| unsigned int i; |
| uint16_t eepromctrl; |
| uint16_t *data_word = data; |
| |
| /* Sanity check. We advertise a blocksize of one word, so |
| * should only ever receive single-word requests. |
| */ |
| assert ( len == sizeof ( *data_word ) ); |
| |
| /* Initiate read */ |
| writew ( ( ICP_EEPROMCTRL_OPCODE_READ | |
| ICP_EEPROMCTRL_ADDRESS ( address ) ), |
| ( icp->regs + ICP_EEPROMCTRL ) ); |
| |
| /* Wait for read to complete */ |
| for ( i = 0 ; i < ICP_EEPROM_MAX_WAIT_MS ; i++ ) { |
| |
| /* If read is not complete, delay 1ms and retry */ |
| eepromctrl = readw ( icp->regs + ICP_EEPROMCTRL ); |
| if ( eepromctrl & ICP_EEPROMCTRL_BUSY ) { |
| mdelay ( 1 ); |
| continue; |
| } |
| |
| /* Extract data */ |
| *data_word = cpu_to_le16 ( readw ( icp->regs + ICP_EEPROMDATA )); |
| return 0; |
| } |
| |
| DBGC ( icp, "ICPLUS %p timed out waiting for EEPROM read\n", icp ); |
| return -ETIMEDOUT; |
| } |
| |
| /** |
| * Write data to EEPROM |
| * |
| * @v nvs NVS device |
| * @v address Address to which to write |
| * @v data Data buffer |
| * @v len Length of data buffer |
| * @ret rc Return status code |
| */ |
| static int icplus_write_eeprom ( struct nvs_device *nvs, |
| unsigned int address __unused, |
| const void *data __unused, |
| size_t len __unused ) { |
| struct icplus_nic *icp = |
| container_of ( nvs, struct icplus_nic, eeprom ); |
| |
| DBGC ( icp, "ICPLUS %p EEPROM write not supported\n", icp ); |
| return -ENOTSUP; |
| } |
| |
| /** |
| * Initialise EEPROM |
| * |
| * @v icp IC+ device |
| */ |
| static void icplus_init_eeprom ( struct icplus_nic *icp ) { |
| |
| /* The hardware supports only single-word reads */ |
| icp->eeprom.word_len_log2 = ICP_EEPROM_WORD_LEN_LOG2; |
| icp->eeprom.size = ICP_EEPROM_MIN_SIZE_WORDS; |
| icp->eeprom.block_size = 1; |
| icp->eeprom.read = icplus_read_eeprom; |
| icp->eeprom.write = icplus_write_eeprom; |
| } |
| |
| /****************************************************************************** |
| * |
| * MII interface |
| * |
| ****************************************************************************** |
| */ |
| |
| /** Pin mapping for MII bit-bashing interface */ |
| static const uint8_t icplus_mii_bits[] = { |
| [MII_BIT_MDC] = ICP_PHYCTRL_MGMTCLK, |
| [MII_BIT_MDIO] = ICP_PHYCTRL_MGMTDATA, |
| [MII_BIT_DRIVE] = ICP_PHYCTRL_MGMTDIR, |
| }; |
| |
| /** |
| * Read input bit |
| * |
| * @v basher Bit-bashing interface |
| * @v bit_id Bit number |
| * @ret zero Input is a logic 0 |
| * @ret non-zero Input is a logic 1 |
| */ |
| static int icplus_mii_read_bit ( struct bit_basher *basher, |
| unsigned int bit_id ) { |
| struct icplus_nic *icp = container_of ( basher, struct icplus_nic, |
| miibit.basher ); |
| uint8_t mask = icplus_mii_bits[bit_id]; |
| uint8_t reg; |
| |
| DBG_DISABLE ( DBGLVL_IO ); |
| reg = readb ( icp->regs + ICP_PHYCTRL ); |
| DBG_ENABLE ( DBGLVL_IO ); |
| return ( reg & mask ); |
| } |
| |
| /** |
| * Set/clear output bit |
| * |
| * @v basher Bit-bashing interface |
| * @v bit_id Bit number |
| * @v data Value to write |
| */ |
| static void icplus_mii_write_bit ( struct bit_basher *basher, |
| unsigned int bit_id, unsigned long data ) { |
| struct icplus_nic *icp = container_of ( basher, struct icplus_nic, |
| miibit.basher ); |
| uint8_t mask = icplus_mii_bits[bit_id]; |
| uint8_t reg; |
| |
| DBG_DISABLE ( DBGLVL_IO ); |
| reg = readb ( icp->regs + ICP_PHYCTRL ); |
| reg &= ~mask; |
| reg |= ( data & mask ); |
| writeb ( reg, icp->regs + ICP_PHYCTRL ); |
| readb ( icp->regs + ICP_PHYCTRL ); /* Ensure write reaches chip */ |
| DBG_ENABLE ( DBGLVL_IO ); |
| } |
| |
| /** MII bit-bashing interface */ |
| static struct bit_basher_operations icplus_basher_ops = { |
| .read = icplus_mii_read_bit, |
| .write = icplus_mii_write_bit, |
| }; |
| |
| /****************************************************************************** |
| * |
| * Link state |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Configure PHY |
| * |
| * @v icp IC+ device |
| * @ret rc Return status code |
| */ |
| static int icplus_init_phy ( struct icplus_nic *icp ) { |
| uint32_t asicctrl; |
| int rc; |
| |
| /* Find PHY address */ |
| if ( ( rc = mii_find ( &icp->mii ) ) != 0 ) { |
| DBGC ( icp, "ICPLUS %p could not find PHY address: %s\n", |
| icp, strerror ( rc ) ); |
| return rc; |
| } |
| |
| /* Configure PHY to advertise 1000Mbps if applicable */ |
| asicctrl = readl ( icp->regs + ICP_ASICCTRL ); |
| if ( asicctrl & ICP_ASICCTRL_PHYSPEED1000 ) { |
| if ( ( rc = mii_write ( &icp->mii, MII_CTRL1000, |
| ADVERTISE_1000FULL ) ) != 0 ) { |
| DBGC ( icp, "ICPLUS %p could not advertise 1000Mbps: " |
| "%s\n", icp, strerror ( rc ) ); |
| return rc; |
| } |
| } |
| |
| /* Reset PHY */ |
| if ( ( rc = mii_reset ( &icp->mii ) ) != 0 ) { |
| DBGC ( icp, "ICPLUS %p could not reset PHY: %s\n", |
| icp, strerror ( rc ) ); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Check link state |
| * |
| * @v netdev Network device |
| */ |
| static void icplus_check_link ( struct net_device *netdev ) { |
| struct icplus_nic *icp = netdev->priv; |
| uint8_t phyctrl; |
| |
| /* Read link status */ |
| phyctrl = readb ( icp->regs + ICP_PHYCTRL ); |
| DBGC ( icp, "ICPLUS %p PHY control is %02x\n", icp, phyctrl ); |
| |
| /* Update network device */ |
| if ( phyctrl & ICP_PHYCTRL_LINKSPEED ) { |
| netdev_link_up ( netdev ); |
| } else { |
| netdev_link_down ( netdev ); |
| } |
| } |
| |
| /****************************************************************************** |
| * |
| * Network device interface |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Set descriptor ring base address |
| * |
| * @v icp IC+ device |
| * @v offset Register offset |
| * @v address Base address |
| */ |
| static inline void icplus_set_base ( struct icplus_nic *icp, unsigned int offset, |
| void *base ) { |
| physaddr_t phys = virt_to_bus ( base ); |
| |
| /* Program base address registers */ |
| writel ( ( phys & 0xffffffffUL ), |
| ( icp->regs + offset + ICP_BASE_LO ) ); |
| if ( sizeof ( phys ) > sizeof ( uint32_t ) ) { |
| writel ( ( ( ( uint64_t ) phys ) >> 32 ), |
| ( icp->regs + offset + ICP_BASE_HI ) ); |
| } else { |
| writel ( 0, ( icp->regs + offset + ICP_BASE_HI ) ); |
| } |
| } |
| |
| /** |
| * Create descriptor ring |
| * |
| * @v icp IC+ device |
| * @v ring Descriptor ring |
| * @ret rc Return status code |
| */ |
| static int icplus_create_ring ( struct icplus_nic *icp, struct icplus_ring *ring ) { |
| size_t len = ( sizeof ( ring->entry[0] ) * ICP_NUM_DESC ); |
| int rc; |
| unsigned int i; |
| struct icplus_descriptor *desc; |
| struct icplus_descriptor *next; |
| |
| /* Allocate descriptor ring */ |
| ring->entry = malloc_phys ( len, ICP_ALIGN ); |
| if ( ! ring->entry ) { |
| rc = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| /* Initialise descriptor ring */ |
| memset ( ring->entry, 0, len ); |
| for ( i = 0 ; i < ICP_NUM_DESC ; i++ ) { |
| desc = &ring->entry[i]; |
| next = &ring->entry[ ( i + 1 ) % ICP_NUM_DESC ]; |
| desc->next = cpu_to_le64 ( virt_to_bus ( next ) ); |
| desc->flags = ( ICP_TX_UNALIGN | ICP_TX_INDICATE ); |
| desc->control = ( ICP_TX_SOLE_FRAG | ICP_DONE ); |
| } |
| |
| /* Reset transmit producer & consumer counters */ |
| ring->prod = 0; |
| ring->cons = 0; |
| |
| DBGC ( icp, "ICP %p %s ring at [%#08lx,%#08lx)\n", |
| icp, ( ( ring->listptr == ICP_TFDLISTPTR ) ? "TX" : "RX" ), |
| virt_to_bus ( ring->entry ), |
| ( virt_to_bus ( ring->entry ) + len ) ); |
| return 0; |
| |
| free_phys ( ring->entry, len ); |
| ring->entry = NULL; |
| err_alloc: |
| return rc; |
| } |
| |
| /** |
| * Destroy descriptor ring |
| * |
| * @v icp IC+ device |
| * @v ring Descriptor ring |
| */ |
| static void icplus_destroy_ring ( struct icplus_nic *icp __unused, |
| struct icplus_ring *ring ) { |
| size_t len = ( sizeof ( ring->entry[0] ) * ICP_NUM_DESC ); |
| |
| /* Free descriptor ring */ |
| free_phys ( ring->entry, len ); |
| ring->entry = NULL; |
| } |
| |
| /** |
| * Refill receive descriptor ring |
| * |
| * @v icp IC+ device |
| */ |
| void icplus_refill_rx ( struct icplus_nic *icp ) { |
| struct icplus_descriptor *desc; |
| struct io_buffer *iobuf; |
| unsigned int rx_idx; |
| physaddr_t address; |
| unsigned int refilled = 0; |
| |
| /* Refill ring */ |
| while ( ( icp->rx.prod - icp->rx.cons ) < ICP_NUM_DESC ) { |
| |
| /* Allocate I/O buffer */ |
| iobuf = alloc_iob ( ICP_RX_MAX_LEN ); |
| if ( ! iobuf ) { |
| /* Wait for next refill */ |
| break; |
| } |
| |
| /* Get next receive descriptor */ |
| rx_idx = ( icp->rx.prod++ % ICP_NUM_DESC ); |
| desc = &icp->rx.entry[rx_idx]; |
| |
| /* Populate receive descriptor */ |
| address = virt_to_bus ( iobuf->data ); |
| desc->data.address = cpu_to_le64 ( address ); |
| desc->data.len = cpu_to_le16 ( ICP_RX_MAX_LEN ); |
| wmb(); |
| desc->control = 0; |
| |
| /* Record I/O buffer */ |
| assert ( icp->rx_iobuf[rx_idx] == NULL ); |
| icp->rx_iobuf[rx_idx] = iobuf; |
| |
| DBGC2 ( icp, "ICP %p RX %d is [%llx,%llx)\n", icp, rx_idx, |
| ( ( unsigned long long ) address ), |
| ( ( unsigned long long ) address + ICP_RX_MAX_LEN ) ); |
| refilled++; |
| } |
| |
| /* Push descriptors to card, if applicable */ |
| if ( refilled ) { |
| wmb(); |
| writew ( ICP_DMACTRL_RXPOLLNOW, icp->regs + ICP_DMACTRL ); |
| } |
| } |
| |
| /** |
| * Open network device |
| * |
| * @v netdev Network device |
| * @ret rc Return status code |
| */ |
| static int icplus_open ( struct net_device *netdev ) { |
| struct icplus_nic *icp = netdev->priv; |
| int rc; |
| |
| /* Create transmit descriptor ring */ |
| if ( ( rc = icplus_create_ring ( icp, &icp->tx ) ) != 0 ) |
| goto err_create_tx; |
| |
| /* Create receive descriptor ring */ |
| if ( ( rc = icplus_create_ring ( icp, &icp->rx ) ) != 0 ) |
| goto err_create_rx; |
| |
| /* Program descriptor base address */ |
| icplus_set_base ( icp, icp->tx.listptr, icp->tx.entry ); |
| icplus_set_base ( icp, icp->rx.listptr, icp->rx.entry ); |
| |
| /* Enable receive mode */ |
| writew ( ( ICP_RXMODE_UNICAST | ICP_RXMODE_MULTICAST | |
| ICP_RXMODE_BROADCAST | ICP_RXMODE_ALLFRAMES ), |
| icp->regs + ICP_RXMODE ); |
| |
| /* Enable transmitter and receiver */ |
| writel ( ( ICP_MACCTRL_TXENABLE | ICP_MACCTRL_RXENABLE | |
| ICP_MACCTRL_DUPLEX ), icp->regs + ICP_MACCTRL ); |
| |
| /* Fill receive ring */ |
| icplus_refill_rx ( icp ); |
| |
| /* Check link state */ |
| icplus_check_link ( netdev ); |
| |
| return 0; |
| |
| icplus_reset ( icp ); |
| icplus_destroy_ring ( icp, &icp->rx ); |
| err_create_rx: |
| icplus_destroy_ring ( icp, &icp->tx ); |
| err_create_tx: |
| return rc; |
| } |
| |
| /** |
| * Close network device |
| * |
| * @v netdev Network device |
| */ |
| static void icplus_close ( struct net_device *netdev ) { |
| struct icplus_nic *icp = netdev->priv; |
| unsigned int i; |
| |
| /* Perform global reset */ |
| icplus_reset ( icp ); |
| |
| /* Destroy receive descriptor ring */ |
| icplus_destroy_ring ( icp, &icp->rx ); |
| |
| /* Destroy transmit descriptor ring */ |
| icplus_destroy_ring ( icp, &icp->tx ); |
| |
| /* Discard any unused receive buffers */ |
| for ( i = 0 ; i < ICP_NUM_DESC ; i++ ) { |
| if ( icp->rx_iobuf[i] ) |
| free_iob ( icp->rx_iobuf[i] ); |
| icp->rx_iobuf[i] = NULL; |
| } |
| } |
| |
| /** |
| * Transmit packet |
| * |
| * @v netdev Network device |
| * @v iobuf I/O buffer |
| * @ret rc Return status code |
| */ |
| static int icplus_transmit ( struct net_device *netdev, |
| struct io_buffer *iobuf ) { |
| struct icplus_nic *icp = netdev->priv; |
| struct icplus_descriptor *desc; |
| unsigned int tx_idx; |
| physaddr_t address; |
| |
| /* Check if ring is full */ |
| if ( ( icp->tx.prod - icp->tx.cons ) >= ICP_NUM_DESC ) { |
| DBGC ( icp, "ICP %p out of transmit descriptors\n", icp ); |
| return -ENOBUFS; |
| } |
| |
| /* Find TX descriptor entry to use */ |
| tx_idx = ( icp->tx.prod++ % ICP_NUM_DESC ); |
| desc = &icp->tx.entry[tx_idx]; |
| |
| /* Fill in TX descriptor */ |
| address = virt_to_bus ( iobuf->data ); |
| desc->data.address = cpu_to_le64 ( address ); |
| desc->data.len = cpu_to_le16 ( iob_len ( iobuf ) ); |
| wmb(); |
| desc->control = ICP_TX_SOLE_FRAG; |
| wmb(); |
| |
| /* Ring doorbell */ |
| writew ( ICP_DMACTRL_TXPOLLNOW, icp->regs + ICP_DMACTRL ); |
| |
| DBGC2 ( icp, "ICP %p TX %d is [%llx,%llx)\n", icp, tx_idx, |
| ( ( unsigned long long ) address ), |
| ( ( unsigned long long ) address + iob_len ( iobuf ) ) ); |
| DBGC2_HDA ( icp, virt_to_phys ( desc ), desc, sizeof ( *desc ) ); |
| return 0; |
| } |
| |
| /** |
| * Poll for completed packets |
| * |
| * @v netdev Network device |
| */ |
| static void icplus_poll_tx ( struct net_device *netdev ) { |
| struct icplus_nic *icp = netdev->priv; |
| struct icplus_descriptor *desc; |
| unsigned int tx_idx; |
| |
| /* Check for completed packets */ |
| while ( icp->tx.cons != icp->tx.prod ) { |
| |
| /* Get next transmit descriptor */ |
| tx_idx = ( icp->tx.cons % ICP_NUM_DESC ); |
| desc = &icp->tx.entry[tx_idx]; |
| |
| /* Stop if descriptor is still in use */ |
| if ( ! ( desc->control & ICP_DONE ) ) |
| return; |
| |
| /* Complete TX descriptor */ |
| DBGC2 ( icp, "ICP %p TX %d complete\n", icp, tx_idx ); |
| netdev_tx_complete_next ( netdev ); |
| icp->tx.cons++; |
| } |
| } |
| |
| /** |
| * Poll for received packets |
| * |
| * @v netdev Network device |
| */ |
| static void icplus_poll_rx ( struct net_device *netdev ) { |
| struct icplus_nic *icp = netdev->priv; |
| struct icplus_descriptor *desc; |
| struct io_buffer *iobuf; |
| unsigned int rx_idx; |
| size_t len; |
| |
| /* Check for received packets */ |
| while ( icp->rx.cons != icp->rx.prod ) { |
| |
| /* Get next transmit descriptor */ |
| rx_idx = ( icp->rx.cons % ICP_NUM_DESC ); |
| desc = &icp->rx.entry[rx_idx]; |
| |
| /* Stop if descriptor is still in use */ |
| if ( ! ( desc->control & ICP_DONE ) ) |
| return; |
| |
| /* Populate I/O buffer */ |
| iobuf = icp->rx_iobuf[rx_idx]; |
| icp->rx_iobuf[rx_idx] = NULL; |
| len = le16_to_cpu ( desc->len ); |
| iob_put ( iobuf, len ); |
| |
| /* Hand off to network stack */ |
| if ( desc->flags & ( ICP_RX_ERR_OVERRUN | ICP_RX_ERR_RUNT | |
| ICP_RX_ERR_ALIGN | ICP_RX_ERR_FCS | |
| ICP_RX_ERR_OVERSIZED | ICP_RX_ERR_LEN ) ) { |
| DBGC ( icp, "ICP %p RX %d error (length %zd, " |
| "flags %02x)\n", icp, rx_idx, len, desc->flags ); |
| netdev_rx_err ( netdev, iobuf, -EIO ); |
| } else { |
| DBGC2 ( icp, "ICP %p RX %d complete (length " |
| "%zd)\n", icp, rx_idx, len ); |
| netdev_rx ( netdev, iobuf ); |
| } |
| icp->rx.cons++; |
| } |
| } |
| |
| /** |
| * Poll for completed and received packets |
| * |
| * @v netdev Network device |
| */ |
| static void icplus_poll ( struct net_device *netdev ) { |
| struct icplus_nic *icp = netdev->priv; |
| uint16_t intstatus; |
| uint32_t txstatus; |
| |
| /* Check for interrupts */ |
| intstatus = readw ( icp->regs + ICP_INTSTATUS ); |
| |
| /* Poll for TX completions, if applicable */ |
| if ( intstatus & ICP_INTSTATUS_TXCOMPLETE ) { |
| txstatus = readl ( icp->regs + ICP_TXSTATUS ); |
| if ( txstatus & ICP_TXSTATUS_ERROR ) |
| DBGC ( icp, "ICP %p TX error: %08x\n", icp, txstatus ); |
| icplus_poll_tx ( netdev ); |
| } |
| |
| /* Poll for RX completions, if applicable */ |
| if ( intstatus & ICP_INTSTATUS_RXDMACOMPLETE ) { |
| writew ( ICP_INTSTATUS_RXDMACOMPLETE, icp->regs + ICP_INTSTATUS ); |
| icplus_poll_rx ( netdev ); |
| } |
| |
| /* Check link state, if applicable */ |
| if ( intstatus & ICP_INTSTATUS_LINKEVENT ) { |
| writew ( ICP_INTSTATUS_LINKEVENT, icp->regs + ICP_INTSTATUS ); |
| icplus_check_link ( netdev ); |
| } |
| |
| /* Refill receive ring */ |
| icplus_refill_rx ( icp ); |
| } |
| |
| /** |
| * Enable or disable interrupts |
| * |
| * @v netdev Network device |
| * @v enable Interrupts should be enabled |
| */ |
| static void icplus_irq ( struct net_device *netdev, int enable ) { |
| struct icplus_nic *icp = netdev->priv; |
| |
| DBGC ( icp, "ICPLUS %p does not yet support interrupts\n", icp ); |
| ( void ) enable; |
| } |
| |
| /** IC+ network device operations */ |
| static struct net_device_operations icplus_operations = { |
| .open = icplus_open, |
| .close = icplus_close, |
| .transmit = icplus_transmit, |
| .poll = icplus_poll, |
| .irq = icplus_irq, |
| }; |
| |
| /****************************************************************************** |
| * |
| * PCI interface |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Probe PCI device |
| * |
| * @v pci PCI device |
| * @ret rc Return status code |
| */ |
| static int icplus_probe ( struct pci_device *pci ) { |
| struct net_device *netdev; |
| struct icplus_nic *icp; |
| int rc; |
| |
| /* Allocate and initialise net device */ |
| netdev = alloc_etherdev ( sizeof ( *icp ) ); |
| if ( ! netdev ) { |
| rc = -ENOMEM; |
| goto err_alloc; |
| } |
| netdev_init ( netdev, &icplus_operations ); |
| icp = netdev->priv; |
| pci_set_drvdata ( pci, netdev ); |
| netdev->dev = &pci->dev; |
| memset ( icp, 0, sizeof ( *icp ) ); |
| icp->miibit.basher.op = &icplus_basher_ops; |
| init_mii_bit_basher ( &icp->miibit ); |
| mii_init ( &icp->mii, &icp->miibit.mdio, 0 ); |
| icp->tx.listptr = ICP_TFDLISTPTR; |
| icp->rx.listptr = ICP_RFDLISTPTR; |
| |
| /* Fix up PCI device */ |
| adjust_pci_device ( pci ); |
| |
| /* Map registers */ |
| icp->regs = pci_ioremap ( pci, pci->membase, ICP_BAR_SIZE ); |
| if ( ! icp->regs ) { |
| rc = -ENODEV; |
| goto err_ioremap; |
| } |
| |
| /* Reset the NIC */ |
| if ( ( rc = icplus_reset ( icp ) ) != 0 ) |
| goto err_reset; |
| |
| /* Initialise EEPROM */ |
| icplus_init_eeprom ( icp ); |
| |
| /* Read EEPROM MAC address */ |
| if ( ( rc = nvs_read ( &icp->eeprom, ICP_EEPROM_MAC, |
| netdev->hw_addr, ETH_ALEN ) ) != 0 ) { |
| DBGC ( icp, "ICPLUS %p could not read EEPROM MAC address: %s\n", |
| icp, strerror ( rc ) ); |
| goto err_eeprom; |
| } |
| |
| /* Configure PHY */ |
| if ( ( rc = icplus_init_phy ( icp ) ) != 0 ) |
| goto err_phy; |
| |
| /* Register network device */ |
| if ( ( rc = register_netdev ( netdev ) ) != 0 ) |
| goto err_register_netdev; |
| |
| /* Set initial link state */ |
| icplus_check_link ( netdev ); |
| |
| return 0; |
| |
| unregister_netdev ( netdev ); |
| err_register_netdev: |
| err_phy: |
| err_eeprom: |
| icplus_reset ( icp ); |
| err_reset: |
| iounmap ( icp->regs ); |
| err_ioremap: |
| netdev_nullify ( netdev ); |
| netdev_put ( netdev ); |
| err_alloc: |
| return rc; |
| } |
| |
| /** |
| * Remove PCI device |
| * |
| * @v pci PCI device |
| */ |
| static void icplus_remove ( struct pci_device *pci ) { |
| struct net_device *netdev = pci_get_drvdata ( pci ); |
| struct icplus_nic *icp = netdev->priv; |
| |
| /* Unregister network device */ |
| unregister_netdev ( netdev ); |
| |
| /* Reset card */ |
| icplus_reset ( icp ); |
| |
| /* Free network device */ |
| iounmap ( icp->regs ); |
| netdev_nullify ( netdev ); |
| netdev_put ( netdev ); |
| } |
| |
| /** IC+ PCI device IDs */ |
| static struct pci_device_id icplus_nics[] = { |
| PCI_ROM ( 0x13f0, 0x1023, "ip1000a", "IP1000A", 0 ), |
| }; |
| |
| /** IC+ PCI driver */ |
| struct pci_driver icplus_driver __pci_driver = { |
| .ids = icplus_nics, |
| .id_count = ( sizeof ( icplus_nics ) / sizeof ( icplus_nics[0] ) ), |
| .probe = icplus_probe, |
| .remove = icplus_remove, |
| }; |