| /* |
| * Copyright (c) 2008-2011 Atheros Communications Inc. |
| * |
| * Modified for iPXE by Scott K Logan <logans@cottsay.net> July 2011 |
| * Original from Linux kernel 3.0.1 |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "hw.h" |
| #include "ar9003_mac.h" |
| #include "ar9003_2p2_initvals.h" |
| #include "ar9485_initvals.h" |
| #include "ar9340_initvals.h" |
| |
| /* General hardware code for the AR9003 hadware family */ |
| |
| /* |
| * The AR9003 family uses a new INI format (pre, core, post |
| * arrays per subsystem). This provides support for the |
| * AR9003 2.2 chipsets. |
| */ |
| static void ar9003_hw_init_mode_regs(struct ath_hw *ah) |
| { |
| if (AR_SREV_9340(ah)) { |
| /* mac */ |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE], |
| ar9340_1p0_mac_core, |
| ARRAY_SIZE(ar9340_1p0_mac_core), 2); |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST], |
| ar9340_1p0_mac_postamble, |
| ARRAY_SIZE(ar9340_1p0_mac_postamble), 5); |
| |
| /* bb */ |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE], |
| ar9340_1p0_baseband_core, |
| ARRAY_SIZE(ar9340_1p0_baseband_core), 2); |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST], |
| ar9340_1p0_baseband_postamble, |
| ARRAY_SIZE(ar9340_1p0_baseband_postamble), 5); |
| |
| /* radio */ |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE], |
| ar9340_1p0_radio_core, |
| ARRAY_SIZE(ar9340_1p0_radio_core), 2); |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST], |
| ar9340_1p0_radio_postamble, |
| ARRAY_SIZE(ar9340_1p0_radio_postamble), 5); |
| |
| /* soc */ |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE], |
| ar9340_1p0_soc_preamble, |
| ARRAY_SIZE(ar9340_1p0_soc_preamble), 2); |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST], |
| ar9340_1p0_soc_postamble, |
| ARRAY_SIZE(ar9340_1p0_soc_postamble), 5); |
| |
| /* rx/tx gain */ |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9340Common_wo_xlna_rx_gain_table_1p0, |
| ARRAY_SIZE(ar9340Common_wo_xlna_rx_gain_table_1p0), |
| 5); |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9340Modes_high_ob_db_tx_gain_table_1p0, |
| ARRAY_SIZE(ar9340Modes_high_ob_db_tx_gain_table_1p0), |
| 5); |
| |
| INIT_INI_ARRAY(&ah->iniModesAdditional, |
| ar9340Modes_fast_clock_1p0, |
| ARRAY_SIZE(ar9340Modes_fast_clock_1p0), |
| 3); |
| |
| INIT_INI_ARRAY(&ah->iniModesAdditional_40M, |
| ar9340_1p0_radio_core_40M, |
| ARRAY_SIZE(ar9340_1p0_radio_core_40M), |
| 2); |
| } else if (AR_SREV_9485_11(ah)) { |
| /* mac */ |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE], |
| ar9485_1_1_mac_core, |
| ARRAY_SIZE(ar9485_1_1_mac_core), 2); |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST], |
| ar9485_1_1_mac_postamble, |
| ARRAY_SIZE(ar9485_1_1_mac_postamble), 5); |
| |
| /* bb */ |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], ar9485_1_1, |
| ARRAY_SIZE(ar9485_1_1), 2); |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE], |
| ar9485_1_1_baseband_core, |
| ARRAY_SIZE(ar9485_1_1_baseband_core), 2); |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST], |
| ar9485_1_1_baseband_postamble, |
| ARRAY_SIZE(ar9485_1_1_baseband_postamble), 5); |
| |
| /* radio */ |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE], |
| ar9485_1_1_radio_core, |
| ARRAY_SIZE(ar9485_1_1_radio_core), 2); |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST], |
| ar9485_1_1_radio_postamble, |
| ARRAY_SIZE(ar9485_1_1_radio_postamble), 2); |
| |
| /* soc */ |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE], |
| ar9485_1_1_soc_preamble, |
| ARRAY_SIZE(ar9485_1_1_soc_preamble), 2); |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST], NULL, 0, 0); |
| |
| /* rx/tx gain */ |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9485Common_wo_xlna_rx_gain_1_1, |
| ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_1), 2); |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9485_modes_lowest_ob_db_tx_gain_1_1, |
| ARRAY_SIZE(ar9485_modes_lowest_ob_db_tx_gain_1_1), |
| 5); |
| |
| /* Load PCIE SERDES settings from INI */ |
| |
| /* Awake Setting */ |
| |
| INIT_INI_ARRAY(&ah->iniPcieSerdes, |
| ar9485_1_1_pcie_phy_clkreq_disable_L1, |
| ARRAY_SIZE(ar9485_1_1_pcie_phy_clkreq_disable_L1), |
| 2); |
| |
| /* Sleep Setting */ |
| |
| INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower, |
| ar9485_1_1_pcie_phy_clkreq_disable_L1, |
| ARRAY_SIZE(ar9485_1_1_pcie_phy_clkreq_disable_L1), |
| 2); |
| } else { |
| /* mac */ |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE], |
| ar9300_2p2_mac_core, |
| ARRAY_SIZE(ar9300_2p2_mac_core), 2); |
| INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST], |
| ar9300_2p2_mac_postamble, |
| ARRAY_SIZE(ar9300_2p2_mac_postamble), 5); |
| |
| /* bb */ |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE], |
| ar9300_2p2_baseband_core, |
| ARRAY_SIZE(ar9300_2p2_baseband_core), 2); |
| INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST], |
| ar9300_2p2_baseband_postamble, |
| ARRAY_SIZE(ar9300_2p2_baseband_postamble), 5); |
| |
| /* radio */ |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE], |
| ar9300_2p2_radio_core, |
| ARRAY_SIZE(ar9300_2p2_radio_core), 2); |
| INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST], |
| ar9300_2p2_radio_postamble, |
| ARRAY_SIZE(ar9300_2p2_radio_postamble), 5); |
| |
| /* soc */ |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE], |
| ar9300_2p2_soc_preamble, |
| ARRAY_SIZE(ar9300_2p2_soc_preamble), 2); |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0); |
| INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST], |
| ar9300_2p2_soc_postamble, |
| ARRAY_SIZE(ar9300_2p2_soc_postamble), 5); |
| |
| /* rx/tx gain */ |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9300Common_rx_gain_table_2p2, |
| ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), 2); |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9300Modes_lowest_ob_db_tx_gain_table_2p2, |
| ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2), |
| 5); |
| |
| /* Load PCIE SERDES settings from INI */ |
| |
| /* Awake Setting */ |
| |
| INIT_INI_ARRAY(&ah->iniPcieSerdes, |
| ar9300PciePhy_pll_on_clkreq_disable_L1_2p2, |
| ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2), |
| 2); |
| |
| /* Sleep Setting */ |
| |
| INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower, |
| ar9300PciePhy_pll_on_clkreq_disable_L1_2p2, |
| ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2), |
| 2); |
| |
| /* Fast clock modal settings */ |
| INIT_INI_ARRAY(&ah->iniModesAdditional, |
| ar9300Modes_fast_clock_2p2, |
| ARRAY_SIZE(ar9300Modes_fast_clock_2p2), |
| 3); |
| } |
| } |
| |
| static void ar9003_tx_gain_table_apply(struct ath_hw *ah) |
| { |
| switch (ar9003_hw_get_tx_gain_idx(ah)) { |
| case 0: |
| default: |
| if (AR_SREV_9340(ah)) |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9340Modes_lowest_ob_db_tx_gain_table_1p0, |
| ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0), |
| 5); |
| else if (AR_SREV_9485_11(ah)) |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9485_modes_lowest_ob_db_tx_gain_1_1, |
| ARRAY_SIZE(ar9485_modes_lowest_ob_db_tx_gain_1_1), |
| 5); |
| else |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9300Modes_lowest_ob_db_tx_gain_table_2p2, |
| ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2), |
| 5); |
| break; |
| case 1: |
| if (AR_SREV_9340(ah)) |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9340Modes_lowest_ob_db_tx_gain_table_1p0, |
| ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0), |
| 5); |
| else if (AR_SREV_9485_11(ah)) |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9485Modes_high_ob_db_tx_gain_1_1, |
| ARRAY_SIZE(ar9485Modes_high_ob_db_tx_gain_1_1), |
| 5); |
| else |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9300Modes_high_ob_db_tx_gain_table_2p2, |
| ARRAY_SIZE(ar9300Modes_high_ob_db_tx_gain_table_2p2), |
| 5); |
| break; |
| case 2: |
| if (AR_SREV_9340(ah)) |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9340Modes_lowest_ob_db_tx_gain_table_1p0, |
| ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0), |
| 5); |
| else if (AR_SREV_9485_11(ah)) |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9485Modes_low_ob_db_tx_gain_1_1, |
| ARRAY_SIZE(ar9485Modes_low_ob_db_tx_gain_1_1), |
| 5); |
| else |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9300Modes_low_ob_db_tx_gain_table_2p2, |
| ARRAY_SIZE(ar9300Modes_low_ob_db_tx_gain_table_2p2), |
| 5); |
| break; |
| case 3: |
| if (AR_SREV_9340(ah)) |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9340Modes_lowest_ob_db_tx_gain_table_1p0, |
| ARRAY_SIZE(ar9340Modes_lowest_ob_db_tx_gain_table_1p0), |
| 5); |
| else if (AR_SREV_9485_11(ah)) |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9485Modes_high_power_tx_gain_1_1, |
| ARRAY_SIZE(ar9485Modes_high_power_tx_gain_1_1), |
| 5); |
| else |
| INIT_INI_ARRAY(&ah->iniModesTxGain, |
| ar9300Modes_high_power_tx_gain_table_2p2, |
| ARRAY_SIZE(ar9300Modes_high_power_tx_gain_table_2p2), |
| 5); |
| break; |
| } |
| } |
| |
| static void ar9003_rx_gain_table_apply(struct ath_hw *ah) |
| { |
| switch (ar9003_hw_get_rx_gain_idx(ah)) { |
| case 0: |
| default: |
| if (AR_SREV_9340(ah)) |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9340Common_rx_gain_table_1p0, |
| ARRAY_SIZE(ar9340Common_rx_gain_table_1p0), |
| 2); |
| else if (AR_SREV_9485_11(ah)) |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9485Common_wo_xlna_rx_gain_1_1, |
| ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_1), |
| 2); |
| else |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9300Common_rx_gain_table_2p2, |
| ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), |
| 2); |
| break; |
| case 1: |
| if (AR_SREV_9340(ah)) |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9340Common_wo_xlna_rx_gain_table_1p0, |
| ARRAY_SIZE(ar9340Common_wo_xlna_rx_gain_table_1p0), |
| 2); |
| else if (AR_SREV_9485_11(ah)) |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9485Common_wo_xlna_rx_gain_1_1, |
| ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_1), |
| 2); |
| else |
| INIT_INI_ARRAY(&ah->iniModesRxGain, |
| ar9300Common_wo_xlna_rx_gain_table_2p2, |
| ARRAY_SIZE(ar9300Common_wo_xlna_rx_gain_table_2p2), |
| 2); |
| break; |
| } |
| } |
| |
| /* set gain table pointers according to values read from the eeprom */ |
| static void ar9003_hw_init_mode_gain_regs(struct ath_hw *ah) |
| { |
| ar9003_tx_gain_table_apply(ah); |
| ar9003_rx_gain_table_apply(ah); |
| } |
| |
| /* |
| * Helper for ASPM support. |
| * |
| * Disable PLL when in L0s as well as receiver clock when in L1. |
| * This power saving option must be enabled through the SerDes. |
| * |
| * Programming the SerDes must go through the same 288 bit serial shift |
| * register as the other analog registers. Hence the 9 writes. |
| */ |
| static void ar9003_hw_configpcipowersave(struct ath_hw *ah, |
| int restore, |
| int power_off) |
| { |
| if (ah->is_pciexpress != 1) |
| return; |
| |
| /* Do not touch SerDes registers */ |
| if (ah->config.pcie_powersave_enable == 2) |
| return; |
| |
| /* Nothing to do on restore for 11N */ |
| if (!restore) { |
| /* set bit 19 to allow forcing of pcie core into L1 state */ |
| REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); |
| |
| /* Several PCIe massages to ensure proper behaviour */ |
| if (ah->config.pcie_waen) |
| REG_WRITE(ah, AR_WA, ah->config.pcie_waen); |
| else |
| REG_WRITE(ah, AR_WA, ah->WARegVal); |
| } |
| |
| /* |
| * Configire PCIE after Ini init. SERDES values now come from ini file |
| * This enables PCIe low power mode. |
| */ |
| if (ah->config.pcieSerDesWrite) { |
| unsigned int i; |
| struct ar5416IniArray *array; |
| |
| array = power_off ? &ah->iniPcieSerdes : |
| &ah->iniPcieSerdesLowPower; |
| |
| for (i = 0; i < array->ia_rows; i++) { |
| REG_WRITE(ah, |
| INI_RA(array, i, 0), |
| INI_RA(array, i, 1)); |
| } |
| } |
| } |
| |
| /* Sets up the AR9003 hardware familiy callbacks */ |
| void ar9003_hw_attach_ops(struct ath_hw *ah) |
| { |
| struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); |
| struct ath_hw_ops *ops = ath9k_hw_ops(ah); |
| |
| priv_ops->init_mode_regs = ar9003_hw_init_mode_regs; |
| priv_ops->init_mode_gain_regs = ar9003_hw_init_mode_gain_regs; |
| |
| ops->config_pci_powersave = ar9003_hw_configpcipowersave; |
| |
| ar9003_hw_attach_phy_ops(ah); |
| ar9003_hw_attach_calib_ops(ah); |
| ar9003_hw_attach_mac_ops(ah); |
| } |