| /* |
| * Copyright (c) 2008 Stefan Hajnoczi <stefanha@gmail.com> |
| * Copyright (c) 2008 Pantelis Koukousoulas <pktoss@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| * |
| * This driver is a port of the b44 linux driver version 1.01 |
| * |
| * Copyright (c) 2002 David S. Miller <davem@redhat.com> |
| * Copyright (c) Pekka Pietikainen <pp@ee.oulu.fi> |
| * Copyright (C) 2006 Broadcom Corporation. |
| * |
| * Some ssb bits copied from version 2.0 of the b44 driver |
| * Copyright (c) Michael Buesch |
| * |
| * Copyright (c) a lot of people too. Please respect their work. |
| */ |
| |
| FILE_LICENCE ( GPL2_OR_LATER ); |
| |
| #include <errno.h> |
| #include <assert.h> |
| #include <stdio.h> |
| #include <unistd.h> |
| #include <byteswap.h> |
| #include <ipxe/io.h> |
| #include <mii.h> |
| #include <ipxe/iobuf.h> |
| #include <ipxe/malloc.h> |
| #include <ipxe/pci.h> |
| #include <ipxe/netdevice.h> |
| #include <ipxe/ethernet.h> |
| #include <ipxe/if_ether.h> |
| #include "b44.h" |
| |
| |
| static inline int ring_next(int index) |
| { |
| /* B44_RING_SIZE is a power of 2 :) */ |
| return (index + 1) & (B44_RING_SIZE - 1); |
| } |
| |
| |
| /* Memory-mapped I/O wrappers */ |
| |
| static inline u32 br32(const struct b44_private *bp, u32 reg) |
| { |
| return readl(bp->regs + reg); |
| } |
| |
| |
| static inline void bw32(const struct b44_private *bp, u32 reg, u32 val) |
| { |
| writel(val, bp->regs + reg); |
| } |
| |
| |
| static inline void bflush(const struct b44_private *bp, u32 reg, u32 timeout) |
| { |
| readl(bp->regs + reg); |
| udelay(timeout); |
| } |
| |
| |
| #define VIRT_TO_B44(addr) ( virt_to_bus(addr) + SB_PCI_DMA ) |
| |
| |
| /** |
| * Check if card can access address |
| * |
| * @v address Virtual address |
| * @v address_ok Card can access address |
| */ |
| static inline __attribute__ (( always_inline )) int |
| b44_address_ok ( void *address ) { |
| |
| /* Card can address anything with a 30-bit address */ |
| if ( ( virt_to_bus ( address ) & ~B44_30BIT_DMA_MASK ) == 0 ) |
| return 1; |
| |
| return 0; |
| } |
| |
| /** |
| * Ring cells waiting to be processed are between 'tx_cur' and 'pending' |
| * indexes in the ring. |
| */ |
| static u32 pending_tx_index(struct b44_private *bp) |
| { |
| u32 pending = br32(bp, B44_DMATX_STAT); |
| pending &= DMATX_STAT_CDMASK; |
| |
| pending /= sizeof(struct dma_desc); |
| return pending & (B44_RING_SIZE - 1); |
| } |
| |
| |
| /** |
| * Ring cells waiting to be processed are between 'rx_cur' and 'pending' |
| * indexes in the ring. |
| */ |
| static u32 pending_rx_index(struct b44_private *bp) |
| { |
| u32 pending = br32(bp, B44_DMARX_STAT); |
| pending &= DMARX_STAT_CDMASK; |
| |
| pending /= sizeof(struct dma_desc); |
| return pending & (B44_RING_SIZE - 1); |
| } |
| |
| |
| /** |
| * Wait until the given bit is set/cleared. |
| */ |
| static int b44_wait_bit(struct b44_private *bp, unsigned long reg, u32 bit, |
| unsigned long timeout, const int clear) |
| { |
| unsigned long i; |
| |
| for (i = 0; i < timeout; i++) { |
| u32 val = br32(bp, reg); |
| |
| if (clear && !(val & bit)) |
| break; |
| |
| if (!clear && (val & bit)) |
| break; |
| |
| udelay(10); |
| } |
| if (i == timeout) { |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * Sonics Silicon Backplane support. SSB is a mini-bus interconnecting |
| * so-called IP Cores. One of those cores implements the Fast Ethernet |
| * functionality and another one the PCI engine. |
| * |
| * You need to switch to the core you want to talk to before actually |
| * sending commands. |
| * |
| * See: http://bcm-v4.sipsolutions.net/Backplane for (reverse-engineered) |
| * specs. |
| */ |
| |
| static inline u32 ssb_get_core_rev(struct b44_private *bp) |
| { |
| return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); |
| } |
| |
| |
| static inline int ssb_is_core_up(struct b44_private *bp) |
| { |
| return ((br32(bp, B44_SBTMSLOW) & (SSB_CORE_DOWN | SBTMSLOW_CLOCK)) |
| == SBTMSLOW_CLOCK); |
| } |
| |
| |
| static u32 ssb_pci_setup(struct b44_private *bp, u32 cores) |
| { |
| u32 bar_orig, pci_rev, val; |
| |
| pci_read_config_dword(bp->pci, SSB_BAR0_WIN, &bar_orig); |
| pci_write_config_dword(bp->pci, SSB_BAR0_WIN, |
| BCM4400_PCI_CORE_ADDR); |
| pci_rev = ssb_get_core_rev(bp); |
| |
| val = br32(bp, B44_SBINTVEC); |
| val |= cores; |
| bw32(bp, B44_SBINTVEC, val); |
| |
| val = br32(bp, SSB_PCI_TRANS_2); |
| val |= SSB_PCI_PREF | SSB_PCI_BURST; |
| bw32(bp, SSB_PCI_TRANS_2, val); |
| |
| pci_write_config_dword(bp->pci, SSB_BAR0_WIN, bar_orig); |
| |
| return pci_rev; |
| } |
| |
| |
| static void ssb_core_disable(struct b44_private *bp) |
| { |
| if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) |
| return; |
| |
| bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); |
| b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); |
| b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); |
| |
| bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | |
| SSB_CORE_DOWN)); |
| bflush(bp, B44_SBTMSLOW, 1); |
| |
| bw32(bp, B44_SBTMSLOW, SSB_CORE_DOWN); |
| bflush(bp, B44_SBTMSLOW, 1); |
| } |
| |
| |
| static void ssb_core_reset(struct b44_private *bp) |
| { |
| u32 val; |
| const u32 mask = (SBTMSLOW_CLOCK | SBTMSLOW_FGC | SBTMSLOW_RESET); |
| |
| ssb_core_disable(bp); |
| |
| bw32(bp, B44_SBTMSLOW, mask); |
| bflush(bp, B44_SBTMSLOW, 1); |
| |
| /* Clear SERR if set, this is a hw bug workaround. */ |
| if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) |
| bw32(bp, B44_SBTMSHIGH, 0); |
| |
| val = br32(bp, B44_SBIMSTATE); |
| if (val & (SBIMSTATE_BAD)) { |
| bw32(bp, B44_SBIMSTATE, val & ~SBIMSTATE_BAD); |
| } |
| |
| bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); |
| bflush(bp, B44_SBTMSLOW, 1); |
| |
| bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); |
| bflush(bp, B44_SBTMSLOW, 1); |
| } |
| |
| |
| /* |
| * Driver helper functions |
| */ |
| |
| /* |
| * Chip reset provides power to the b44 MAC & PCI cores, which |
| * is necessary for MAC register access. We only do a partial |
| * reset in case of transmit/receive errors (ISTAT_ERRORS) to |
| * avoid the chip being hung for an unnecessary long time in |
| * this case. |
| * |
| * Called-by: b44_close, b44_halt, b44_inithw(b44_open), b44_probe |
| */ |
| static void b44_chip_reset(struct b44_private *bp, int reset_kind) |
| { |
| if (ssb_is_core_up(bp)) { |
| bw32(bp, B44_RCV_LAZY, 0); |
| |
| bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); |
| |
| b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1); |
| |
| bw32(bp, B44_DMATX_CTRL, 0); |
| |
| bp->tx_dirty = bp->tx_cur = 0; |
| |
| if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) |
| b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE, |
| 100, 0); |
| |
| bw32(bp, B44_DMARX_CTRL, 0); |
| |
| bp->rx_cur = 0; |
| } else { |
| ssb_pci_setup(bp, SBINTVEC_ENET0); |
| } |
| |
| ssb_core_reset(bp); |
| |
| /* Don't enable PHY if we are only doing a partial reset. */ |
| if (reset_kind == B44_CHIP_RESET_PARTIAL) |
| return; |
| |
| /* Make PHY accessible. */ |
| bw32(bp, B44_MDIO_CTRL, |
| (MDIO_CTRL_PREAMBLE | (0x0d & MDIO_CTRL_MAXF_MASK))); |
| bflush(bp, B44_MDIO_CTRL, 1); |
| |
| /* Enable internal or external PHY */ |
| if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { |
| bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL); |
| bflush(bp, B44_ENET_CTRL, 1); |
| } else { |
| u32 val = br32(bp, B44_DEVCTRL); |
| if (val & DEVCTRL_EPR) { |
| bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR)); |
| bflush(bp, B44_DEVCTRL, 100); |
| } |
| } |
| } |
| |
| |
| /** |
| * called by b44_poll in the error path |
| */ |
| static void b44_halt(struct b44_private *bp) |
| { |
| /* disable ints */ |
| bw32(bp, B44_IMASK, 0); |
| bflush(bp, B44_IMASK, 1); |
| |
| DBG("b44: powering down PHY\n"); |
| bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN); |
| |
| /* |
| * Now reset the chip, but without enabling |
| * the MAC&PHY part of it. |
| * This has to be done _after_ we shut down the PHY |
| */ |
| b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL); |
| } |
| |
| |
| |
| /* |
| * Called at device open time to get the chip ready for |
| * packet processing. |
| * |
| * Called-by: b44_open |
| */ |
| static void b44_init_hw(struct b44_private *bp, int reset_kind) |
| { |
| u32 val; |
| #define CTRL_MASK (DMARX_CTRL_ENABLE | (RX_PKT_OFFSET << DMARX_CTRL_ROSHIFT)) |
| |
| b44_chip_reset(bp, B44_CHIP_RESET_FULL); |
| if (reset_kind == B44_FULL_RESET) { |
| b44_phy_reset(bp); |
| } |
| |
| /* Enable CRC32, set proper LED modes and power on PHY */ |
| bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); |
| bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); |
| |
| /* This sets the MAC address too. */ |
| b44_set_rx_mode(bp->netdev); |
| |
| /* MTU + eth header + possible VLAN tag + struct rx_header */ |
| bw32(bp, B44_RXMAXLEN, B44_MAX_MTU + ETH_HLEN + 8 + RX_HEADER_LEN); |
| bw32(bp, B44_TXMAXLEN, B44_MAX_MTU + ETH_HLEN + 8 + RX_HEADER_LEN); |
| |
| bw32(bp, B44_TX_HIWMARK, TX_HIWMARK_DEFLT); |
| if (reset_kind == B44_PARTIAL_RESET) { |
| bw32(bp, B44_DMARX_CTRL, CTRL_MASK); |
| } else { |
| bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE); |
| bw32(bp, B44_DMATX_ADDR, VIRT_TO_B44(bp->tx)); |
| |
| bw32(bp, B44_DMARX_CTRL, CTRL_MASK); |
| bw32(bp, B44_DMARX_ADDR, VIRT_TO_B44(bp->rx)); |
| bw32(bp, B44_DMARX_PTR, B44_RX_RING_LEN_BYTES); |
| |
| bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); |
| } |
| |
| val = br32(bp, B44_ENET_CTRL); |
| bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); |
| #undef CTRL_MASK |
| } |
| |
| |
| /*** Management of ring descriptors ***/ |
| |
| |
| static void b44_populate_rx_descriptor(struct b44_private *bp, u32 idx) |
| { |
| struct rx_header *rh; |
| u32 ctrl, addr; |
| |
| rh = bp->rx_iobuf[idx]->data; |
| rh->len = 0; |
| rh->flags = 0; |
| ctrl = DESC_CTRL_LEN & (RX_PKT_BUF_SZ - RX_PKT_OFFSET); |
| if (idx == B44_RING_LAST) { |
| ctrl |= DESC_CTRL_EOT; |
| } |
| addr = VIRT_TO_B44(bp->rx_iobuf[idx]->data); |
| |
| bp->rx[idx].ctrl = cpu_to_le32(ctrl); |
| bp->rx[idx].addr = cpu_to_le32(addr); |
| bw32(bp, B44_DMARX_PTR, idx * sizeof(struct dma_desc)); |
| } |
| |
| |
| /* |
| * Refill RX ring descriptors with buffers. This is needed |
| * because during rx we are passing ownership of descriptor |
| * buffers to the network stack. |
| */ |
| static void b44_rx_refill(struct b44_private *bp, u32 pending) |
| { |
| struct io_buffer *iobuf; |
| u32 i; |
| |
| // skip pending |
| for (i = pending + 1; i != bp->rx_cur; i = ring_next(i)) { |
| if (bp->rx_iobuf[i] != NULL) |
| continue; |
| |
| iobuf = alloc_iob(RX_PKT_BUF_SZ); |
| if (!iobuf) { |
| DBG("Refill rx ring failed!!\n"); |
| break; |
| } |
| if (!b44_address_ok(iobuf->data)) { |
| DBG("Refill rx ring bad address!!\n"); |
| free_iob(iobuf); |
| break; |
| } |
| bp->rx_iobuf[i] = iobuf; |
| |
| b44_populate_rx_descriptor(bp, i); |
| } |
| } |
| |
| |
| static void b44_free_rx_ring(struct b44_private *bp) |
| { |
| u32 i; |
| |
| if (bp->rx) { |
| for (i = 0; i < B44_RING_SIZE; i++) { |
| free_iob(bp->rx_iobuf[i]); |
| bp->rx_iobuf[i] = NULL; |
| } |
| free_phys(bp->rx, B44_RX_RING_LEN_BYTES); |
| bp->rx = NULL; |
| } |
| } |
| |
| |
| static int b44_init_rx_ring(struct b44_private *bp) |
| { |
| b44_free_rx_ring(bp); |
| |
| bp->rx = malloc_phys(B44_RX_RING_LEN_BYTES, B44_DMA_ALIGNMENT); |
| if (!bp->rx) |
| return -ENOMEM; |
| if (!b44_address_ok(bp->rx)) { |
| free_phys(bp->rx, B44_RX_RING_LEN_BYTES); |
| return -ENOTSUP; |
| } |
| |
| memset(bp->rx_iobuf, 0, sizeof(bp->rx_iobuf)); |
| |
| bp->rx_iobuf[0] = alloc_iob(RX_PKT_BUF_SZ); |
| b44_populate_rx_descriptor(bp, 0); |
| b44_rx_refill(bp, 0); |
| |
| DBG("Init RX rings: rx=0x%08lx\n", VIRT_TO_B44(bp->rx)); |
| return 0; |
| } |
| |
| |
| static void b44_free_tx_ring(struct b44_private *bp) |
| { |
| if (bp->tx) { |
| free_phys(bp->tx, B44_TX_RING_LEN_BYTES); |
| bp->tx = NULL; |
| } |
| } |
| |
| |
| static int b44_init_tx_ring(struct b44_private *bp) |
| { |
| b44_free_tx_ring(bp); |
| |
| bp->tx = malloc_phys(B44_TX_RING_LEN_BYTES, B44_DMA_ALIGNMENT); |
| if (!bp->tx) |
| return -ENOMEM; |
| if (!b44_address_ok(bp->tx)) { |
| free_phys(bp->tx, B44_TX_RING_LEN_BYTES); |
| return -ENOTSUP; |
| } |
| |
| memset(bp->tx, 0, B44_TX_RING_LEN_BYTES); |
| memset(bp->tx_iobuf, 0, sizeof(bp->tx_iobuf)); |
| |
| DBG("Init TX rings: tx=0x%08lx\n", VIRT_TO_B44(bp->tx)); |
| return 0; |
| } |
| |
| |
| /*** Interaction with the PHY ***/ |
| |
| |
| static int b44_phy_read(struct b44_private *bp, int reg, u32 * val) |
| { |
| int err; |
| |
| u32 arg1 = (MDIO_OP_READ << MDIO_DATA_OP_SHIFT); |
| u32 arg2 = (bp->phy_addr << MDIO_DATA_PMD_SHIFT); |
| u32 arg3 = (reg << MDIO_DATA_RA_SHIFT); |
| u32 arg4 = (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT); |
| u32 argv = arg1 | arg2 | arg3 | arg4; |
| |
| bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); |
| bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | argv)); |
| err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); |
| *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA; |
| |
| return err; |
| } |
| |
| |
| static int b44_phy_write(struct b44_private *bp, int reg, u32 val) |
| { |
| u32 arg1 = (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT); |
| u32 arg2 = (bp->phy_addr << MDIO_DATA_PMD_SHIFT); |
| u32 arg3 = (reg << MDIO_DATA_RA_SHIFT); |
| u32 arg4 = (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT); |
| u32 arg5 = (val & MDIO_DATA_DATA); |
| u32 argv = arg1 | arg2 | arg3 | arg4 | arg5; |
| |
| |
| bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); |
| bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | argv)); |
| return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); |
| } |
| |
| |
| static int b44_phy_reset(struct b44_private *bp) |
| { |
| u32 val; |
| int err; |
| |
| err = b44_phy_write(bp, MII_BMCR, BMCR_RESET); |
| if (err) |
| return err; |
| |
| udelay(100); |
| err = b44_phy_read(bp, MII_BMCR, &val); |
| if (!err) { |
| if (val & BMCR_RESET) { |
| return -ENODEV; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| /* |
| * The BCM44xx CAM (Content Addressable Memory) stores the MAC |
| * and PHY address. |
| */ |
| static void b44_cam_write(struct b44_private *bp, unsigned char *data, |
| int index) |
| { |
| u32 val; |
| |
| val = ((u32) data[2]) << 24; |
| val |= ((u32) data[3]) << 16; |
| val |= ((u32) data[4]) << 8; |
| val |= ((u32) data[5]) << 0; |
| bw32(bp, B44_CAM_DATA_LO, val); |
| |
| |
| val = (CAM_DATA_HI_VALID | |
| (((u32) data[0]) << 8) | (((u32) data[1]) << 0)); |
| |
| bw32(bp, B44_CAM_DATA_HI, val); |
| |
| val = CAM_CTRL_WRITE | (index << CAM_CTRL_INDEX_SHIFT); |
| bw32(bp, B44_CAM_CTRL, val); |
| |
| b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); |
| } |
| |
| |
| static void b44_set_mac_addr(struct b44_private *bp) |
| { |
| u32 val; |
| bw32(bp, B44_CAM_CTRL, 0); |
| b44_cam_write(bp, bp->netdev->ll_addr, 0); |
| val = br32(bp, B44_CAM_CTRL); |
| bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); |
| } |
| |
| |
| /* Read 128-bytes of EEPROM. */ |
| static void b44_read_eeprom(struct b44_private *bp, u8 * data) |
| { |
| long i; |
| u16 *ptr = (u16 *) data; |
| |
| for (i = 0; i < 128; i += 2) |
| ptr[i / 2] = cpu_to_le16(readw(bp->regs + 4096 + i)); |
| } |
| |
| |
| static void b44_load_mac_and_phy_addr(struct b44_private *bp) |
| { |
| u8 eeprom[128]; |
| |
| /* Load MAC address, note byteswapping */ |
| b44_read_eeprom(bp, &eeprom[0]); |
| bp->netdev->hw_addr[0] = eeprom[79]; |
| bp->netdev->hw_addr[1] = eeprom[78]; |
| bp->netdev->hw_addr[2] = eeprom[81]; |
| bp->netdev->hw_addr[3] = eeprom[80]; |
| bp->netdev->hw_addr[4] = eeprom[83]; |
| bp->netdev->hw_addr[5] = eeprom[82]; |
| |
| /* Load PHY address */ |
| bp->phy_addr = eeprom[90] & 0x1f; |
| } |
| |
| |
| static void b44_set_rx_mode(struct net_device *netdev) |
| { |
| struct b44_private *bp = netdev_priv(netdev); |
| unsigned char zero[6] = { 0, 0, 0, 0, 0, 0 }; |
| u32 val; |
| int i; |
| |
| val = br32(bp, B44_RXCONFIG); |
| val &= ~RXCONFIG_PROMISC; |
| val |= RXCONFIG_ALLMULTI; |
| |
| b44_set_mac_addr(bp); |
| |
| for (i = 1; i < 64; i++) |
| b44_cam_write(bp, zero, i); |
| |
| bw32(bp, B44_RXCONFIG, val); |
| val = br32(bp, B44_CAM_CTRL); |
| bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); |
| } |
| |
| |
| /*** Implementation of iPXE driver callbacks ***/ |
| |
| /** |
| * Probe device |
| * |
| * @v pci PCI device |
| * @v id Matching entry in ID table |
| * @ret rc Return status code |
| */ |
| static int b44_probe(struct pci_device *pci) |
| { |
| struct net_device *netdev; |
| struct b44_private *bp; |
| int rc; |
| |
| /* Set up netdev */ |
| netdev = alloc_etherdev(sizeof(*bp)); |
| if (!netdev) |
| return -ENOMEM; |
| |
| netdev_init(netdev, &b44_operations); |
| pci_set_drvdata(pci, netdev); |
| netdev->dev = &pci->dev; |
| |
| /* Set up private data */ |
| bp = netdev_priv(netdev); |
| memset(bp, 0, sizeof(*bp)); |
| bp->netdev = netdev; |
| bp->pci = pci; |
| |
| /* Map device registers */ |
| bp->regs = pci_ioremap(pci, pci->membase, B44_REGS_SIZE); |
| if (!bp->regs) { |
| netdev_put(netdev); |
| return -ENOMEM; |
| } |
| |
| /* Enable PCI bus mastering */ |
| adjust_pci_device(pci); |
| |
| b44_load_mac_and_phy_addr(bp); |
| |
| rc = register_netdev(netdev); |
| if (rc != 0) { |
| iounmap(bp->regs); |
| netdev_put(netdev); |
| return rc; |
| } |
| |
| /* Link management currently not implemented */ |
| netdev_link_up(netdev); |
| |
| b44_chip_reset(bp, B44_CHIP_RESET_FULL); |
| |
| DBG("b44 %s (%04x:%04x) regs=%p MAC=%s\n", pci->id->name, |
| pci->id->vendor, pci->id->device, bp->regs, |
| eth_ntoa(netdev->ll_addr)); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * Remove device |
| * |
| * @v pci PCI device |
| */ |
| static void b44_remove(struct pci_device *pci) |
| { |
| struct net_device *netdev = pci_get_drvdata(pci); |
| struct b44_private *bp = netdev_priv(netdev); |
| |
| ssb_core_disable(bp); |
| unregister_netdev(netdev); |
| iounmap(bp->regs); |
| netdev_nullify(netdev); |
| netdev_put(netdev); |
| } |
| |
| |
| /** Enable or disable interrupts |
| * |
| * @v netdev Network device |
| * @v enable Interrupts should be enabled |
| */ |
| static void b44_irq(struct net_device *netdev, int enable) |
| { |
| struct b44_private *bp = netdev_priv(netdev); |
| |
| /* Interrupt mask specifies which events generate interrupts */ |
| bw32(bp, B44_IMASK, enable ? IMASK_DEF : IMASK_DISABLE); |
| } |
| |
| |
| /** Open network device |
| * |
| * @v netdev Network device |
| * @ret rc Return status code |
| */ |
| static int b44_open(struct net_device *netdev) |
| { |
| struct b44_private *bp = netdev_priv(netdev); |
| int rc; |
| |
| rc = b44_init_tx_ring(bp); |
| if (rc != 0) |
| return rc; |
| |
| rc = b44_init_rx_ring(bp); |
| if (rc != 0) |
| return rc; |
| |
| b44_init_hw(bp, B44_FULL_RESET); |
| |
| /* Disable interrupts */ |
| b44_irq(netdev, 0); |
| |
| return 0; |
| } |
| |
| |
| /** Close network device |
| * |
| * @v netdev Network device |
| */ |
| static void b44_close(struct net_device *netdev) |
| { |
| struct b44_private *bp = netdev_priv(netdev); |
| |
| b44_chip_reset(bp, B44_FULL_RESET); |
| b44_free_tx_ring(bp); |
| b44_free_rx_ring(bp); |
| } |
| |
| |
| /** Transmit packet |
| * |
| * @v netdev Network device |
| * @v iobuf I/O buffer |
| * @ret rc Return status code |
| */ |
| static int b44_transmit(struct net_device *netdev, struct io_buffer *iobuf) |
| { |
| struct b44_private *bp = netdev_priv(netdev); |
| u32 cur = bp->tx_cur; |
| u32 ctrl; |
| |
| /* Check for TX ring overflow */ |
| if (bp->tx[cur].ctrl) { |
| DBG("tx overflow\n"); |
| return -ENOBUFS; |
| } |
| |
| /* Check for addressability */ |
| if (!b44_address_ok(iobuf->data)) |
| return -ENOTSUP; |
| |
| /* Will call netdev_tx_complete() on the iobuf later */ |
| bp->tx_iobuf[cur] = iobuf; |
| |
| /* Set up TX descriptor */ |
| ctrl = (iob_len(iobuf) & DESC_CTRL_LEN) | |
| DESC_CTRL_IOC | DESC_CTRL_SOF | DESC_CTRL_EOF; |
| |
| if (cur == B44_RING_LAST) |
| ctrl |= DESC_CTRL_EOT; |
| |
| bp->tx[cur].ctrl = cpu_to_le32(ctrl); |
| bp->tx[cur].addr = cpu_to_le32(VIRT_TO_B44(iobuf->data)); |
| |
| /* Update next available descriptor index */ |
| cur = ring_next(cur); |
| bp->tx_cur = cur; |
| wmb(); |
| |
| /* Tell card that a new TX descriptor is ready */ |
| bw32(bp, B44_DMATX_PTR, cur * sizeof(struct dma_desc)); |
| return 0; |
| } |
| |
| |
| /** Recycles sent TX descriptors and notifies network stack |
| * |
| * @v bp Driver state |
| */ |
| static void b44_tx_complete(struct b44_private *bp) |
| { |
| u32 cur, i; |
| |
| cur = pending_tx_index(bp); |
| |
| for (i = bp->tx_dirty; i != cur; i = ring_next(i)) { |
| /* Free finished frame */ |
| netdev_tx_complete(bp->netdev, bp->tx_iobuf[i]); |
| bp->tx_iobuf[i] = NULL; |
| |
| /* Clear TX descriptor */ |
| bp->tx[i].ctrl = 0; |
| bp->tx[i].addr = 0; |
| } |
| bp->tx_dirty = cur; |
| } |
| |
| |
| static void b44_process_rx_packets(struct b44_private *bp) |
| { |
| struct io_buffer *iob; /* received data */ |
| struct rx_header *rh; |
| u32 pending, i; |
| u16 len; |
| |
| pending = pending_rx_index(bp); |
| |
| for (i = bp->rx_cur; i != pending; i = ring_next(i)) { |
| iob = bp->rx_iobuf[i]; |
| if (iob == NULL) |
| break; |
| |
| rh = iob->data; |
| len = le16_to_cpu(rh->len); |
| |
| /* |
| * Guard against incompletely written RX descriptors. |
| * Without this, things can get really slow! |
| */ |
| if (len == 0) |
| break; |
| |
| /* Discard CRC that is generated by the card */ |
| len -= 4; |
| |
| /* Check for invalid packets and errors */ |
| if (len > RX_PKT_BUF_SZ - RX_PKT_OFFSET || |
| (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) { |
| DBG("rx error len=%d flags=%04x\n", len, |
| cpu_to_le16(rh->flags)); |
| rh->len = 0; |
| rh->flags = 0; |
| netdev_rx_err(bp->netdev, iob, -EINVAL); |
| continue; |
| } |
| |
| /* Clear RX descriptor */ |
| rh->len = 0; |
| rh->flags = 0; |
| bp->rx_iobuf[i] = NULL; |
| |
| /* Hand off the IO buffer to the network stack */ |
| iob_reserve(iob, RX_PKT_OFFSET); |
| iob_put(iob, len); |
| netdev_rx(bp->netdev, iob); |
| } |
| bp->rx_cur = i; |
| b44_rx_refill(bp, pending_rx_index(bp)); |
| } |
| |
| |
| /** Poll for completed and received packets |
| * |
| * @v netdev Network device |
| */ |
| static void b44_poll(struct net_device *netdev) |
| { |
| struct b44_private *bp = netdev_priv(netdev); |
| u32 istat; |
| |
| /* Interrupt status */ |
| istat = br32(bp, B44_ISTAT); |
| istat &= IMASK_DEF; /* only the events we care about */ |
| |
| if (!istat) |
| return; |
| if (istat & ISTAT_TX) |
| b44_tx_complete(bp); |
| if (istat & ISTAT_RX) |
| b44_process_rx_packets(bp); |
| if (istat & ISTAT_ERRORS) { |
| DBG("b44 error istat=0x%08x\n", istat); |
| |
| /* Reset B44 core partially to avoid long waits */ |
| b44_irq(bp->netdev, 0); |
| b44_halt(bp); |
| b44_init_tx_ring(bp); |
| b44_init_rx_ring(bp); |
| b44_init_hw(bp, B44_FULL_RESET_SKIP_PHY); |
| } |
| |
| /* Acknowledge interrupt */ |
| bw32(bp, B44_ISTAT, 0); |
| bflush(bp, B44_ISTAT, 1); |
| } |
| |
| |
| static struct net_device_operations b44_operations = { |
| .open = b44_open, |
| .close = b44_close, |
| .transmit = b44_transmit, |
| .poll = b44_poll, |
| .irq = b44_irq, |
| }; |
| |
| |
| static struct pci_device_id b44_nics[] = { |
| PCI_ROM(0x14e4, 0x4401, "BCM4401", "BCM4401", 0), |
| PCI_ROM(0x14e4, 0x170c, "BCM4401-B0", "BCM4401-B0", 0), |
| PCI_ROM(0x14e4, 0x4402, "BCM4401-B1", "BCM4401-B1", 0), |
| }; |
| |
| |
| struct pci_driver b44_driver __pci_driver = { |
| .ids = b44_nics, |
| .id_count = sizeof b44_nics / sizeof b44_nics[0], |
| .probe = b44_probe, |
| .remove = b44_remove, |
| }; |