src/include/xen/hvm/params.h - ipxe - Git at Google

 /* SPDX-License-Identifier: MIT */
 /*
  * Copyright (c) 2007, Keir Fraser
  */

 #ifndef __XEN_PUBLIC_HVM_PARAMS_H__
 #define __XEN_PUBLIC_HVM_PARAMS_H__

 FILE_LICENCE ( MIT );

 #include "hvm_op.h"

 /* These parameters are deprecated and their meaning is undefined. */
 #if defined(__XEN__) || defined(__XEN_TOOLS__)

 #define HVM_PARAM_PAE_ENABLED                4
 #define HVM_PARAM_DM_DOMAIN                 13
 #define HVM_PARAM_MEMORY_EVENT_CR0          20
 #define HVM_PARAM_MEMORY_EVENT_CR3          21
 #define HVM_PARAM_MEMORY_EVENT_CR4          22
 #define HVM_PARAM_MEMORY_EVENT_INT3         23
 #define HVM_PARAM_NESTEDHVM                 24
 #define HVM_PARAM_MEMORY_EVENT_SINGLE_STEP  25
 #define HVM_PARAM_BUFIOREQ_EVTCHN           26
 #define HVM_PARAM_MEMORY_EVENT_MSR          30

 #endif /* defined(__XEN__) || defined(__XEN_TOOLS__) */

 /*
  * Parameter space for HVMOP_{set,get}_param.
  */

 #define HVM_PARAM_CALLBACK_IRQ 0
 #define HVM_PARAM_CALLBACK_IRQ_TYPE_MASK xen_mk_ullong(0xFF00000000000000)
 /*
  * How should CPU0 event-channel notifications be delivered?
  *
  * If val == 0 then CPU0 event-channel notifications are not delivered.
  * If val != 0, val[63:56] encodes the type, as follows:
  */

 #define HVM_PARAM_CALLBACK_TYPE_GSI      0
 /*
  * val[55:0] is a delivery GSI.  GSI 0 cannot be used, as it aliases val == 0,
  * and disables all notifications.
  */

 #define HVM_PARAM_CALLBACK_TYPE_PCI_INTX 1
 /*
  * val[55:0] is a delivery PCI INTx line:
  * Domain = val[47:32], Bus = val[31:16] DevFn = val[15:8], IntX = val[1:0]
  */

 #if defined(__i386__) || defined(__x86_64__)
 #define HVM_PARAM_CALLBACK_TYPE_VECTOR   2
 /*
  * val[7:0] is a vector number.  Check for XENFEAT_hvm_callback_vector to know
  * if this delivery method is available.
  */
 #elif defined(__arm__) || defined(__aarch64__)
 #define HVM_PARAM_CALLBACK_TYPE_PPI      2
 /*
  * val[55:16] needs to be zero.
  * val[15:8] is interrupt flag of the PPI used by event-channel:
  *  bit 8: the PPI is edge(1) or level(0) triggered
  *  bit 9: the PPI is active low(1) or high(0)
  * val[7:0] is a PPI number used by event-channel.
  * This is only used by ARM/ARM64 and masking/eoi the interrupt associated to
  * the notification is handled by the interrupt controller.
  */
 #define HVM_PARAM_CALLBACK_TYPE_PPI_FLAG_MASK      0xFF00
 #define HVM_PARAM_CALLBACK_TYPE_PPI_FLAG_LOW_LEVEL 2
 #endif

 /*
  * These are not used by Xen. They are here for convenience of HVM-guest
  * xenbus implementations.
  */
 #define HVM_PARAM_STORE_PFN    1
 #define HVM_PARAM_STORE_EVTCHN 2

 #define HVM_PARAM_IOREQ_PFN    5

 #define HVM_PARAM_BUFIOREQ_PFN 6

 #if defined(__i386__) || defined(__x86_64__)

 /*
  * Viridian enlightenments
  *
  * (See http://download.microsoft.com/download/A/B/4/AB43A34E-BDD0-4FA6-BDEF-79EEF16E880B/Hypervisor%20Top%20Level%20Functional%20Specification%20v4.0.docx)
  *
  * To expose viridian enlightenments to the guest set this parameter
  * to the desired feature mask. The base feature set must be present
  * in any valid feature mask.
  */
 #define HVM_PARAM_VIRIDIAN     9

 /* Base+Freq viridian feature sets:
  *
  * - Hypercall MSRs (HV_X64_MSR_GUEST_OS_ID and HV_X64_MSR_HYPERCALL)
  * - APIC access MSRs (HV_X64_MSR_EOI, HV_X64_MSR_ICR and HV_X64_MSR_TPR)
  * - Virtual Processor index MSR (HV_X64_MSR_VP_INDEX)
  * - Timer frequency MSRs (HV_X64_MSR_TSC_FREQUENCY and
  *   HV_X64_MSR_APIC_FREQUENCY)
  */
 #define _HVMPV_base_freq 0
 #define HVMPV_base_freq  (1 << _HVMPV_base_freq)

 /* Feature set modifications */

 /* Disable timer frequency MSRs (HV_X64_MSR_TSC_FREQUENCY and
  * HV_X64_MSR_APIC_FREQUENCY).
  * This modification restores the viridian feature set to the
  * original 'base' set exposed in releases prior to Xen 4.4.
  */
 #define _HVMPV_no_freq 1
 #define HVMPV_no_freq  (1 << _HVMPV_no_freq)

 /* Enable Partition Time Reference Counter (HV_X64_MSR_TIME_REF_COUNT) */
 #define _HVMPV_time_ref_count 2
 #define HVMPV_time_ref_count  (1 << _HVMPV_time_ref_count)

 /* Enable Reference TSC Page (HV_X64_MSR_REFERENCE_TSC) */
 #define _HVMPV_reference_tsc 3
 #define HVMPV_reference_tsc  (1 << _HVMPV_reference_tsc)

 /* Use Hypercall for remote TLB flush */
 #define _HVMPV_hcall_remote_tlb_flush 4
 #define HVMPV_hcall_remote_tlb_flush (1 << _HVMPV_hcall_remote_tlb_flush)

 /* Use APIC assist */
 #define _HVMPV_apic_assist 5
 #define HVMPV_apic_assist (1 << _HVMPV_apic_assist)

 /* Enable crash MSRs */
 #define _HVMPV_crash_ctl 6
 #define HVMPV_crash_ctl (1 << _HVMPV_crash_ctl)

 /* Enable SYNIC MSRs */
 #define _HVMPV_synic 7
 #define HVMPV_synic (1 << _HVMPV_synic)

 /* Enable STIMER MSRs */
 #define _HVMPV_stimer 8
 #define HVMPV_stimer (1 << _HVMPV_stimer)

 /* Use Synthetic Cluster IPI Hypercall */
 #define _HVMPV_hcall_ipi 9
 #define HVMPV_hcall_ipi (1 << _HVMPV_hcall_ipi)

 /* Enable ExProcessorMasks */
 #define _HVMPV_ex_processor_masks 10
 #define HVMPV_ex_processor_masks (1 << _HVMPV_ex_processor_masks)

 /* Allow more than 64 VPs */
 #define _HVMPV_no_vp_limit 11
 #define HVMPV_no_vp_limit (1 << _HVMPV_no_vp_limit)

 /* Enable vCPU hotplug */
 #define _HVMPV_cpu_hotplug 12
 #define HVMPV_cpu_hotplug (1 << _HVMPV_cpu_hotplug)

 #define HVMPV_feature_mask \
         (HVMPV_base_freq | \
          HVMPV_no_freq | \
          HVMPV_time_ref_count | \
          HVMPV_reference_tsc | \
          HVMPV_hcall_remote_tlb_flush | \
          HVMPV_apic_assist | \
          HVMPV_crash_ctl | \
          HVMPV_synic | \
          HVMPV_stimer | \
          HVMPV_hcall_ipi | \
          HVMPV_ex_processor_masks | \
          HVMPV_no_vp_limit | \
          HVMPV_cpu_hotplug)

 #endif

 /*
  * Set mode for virtual timers (currently x86 only):
  *  delay_for_missed_ticks (default):
  *   Do not advance a vcpu's time beyond the correct delivery time for
  *   interrupts that have been missed due to preemption. Deliver missed
  *   interrupts when the vcpu is rescheduled and advance the vcpu's virtual
  *   time stepwise for each one.
  *  no_delay_for_missed_ticks:
  *   As above, missed interrupts are delivered, but guest time always tracks
  *   wallclock (i.e., real) time while doing so.
  *  no_missed_ticks_pending:
  *   No missed interrupts are held pending. Instead, to ensure ticks are
  *   delivered at some non-zero rate, if we detect missed ticks then the
  *   internal tick alarm is not disabled if the VCPU is preempted during the
  *   next tick period.
  *  one_missed_tick_pending:
  *   Missed interrupts are collapsed together and delivered as one 'late tick'.
  *   Guest time always tracks wallclock (i.e., real) time.
  */
 #define HVM_PARAM_TIMER_MODE   10
 #define HVMPTM_delay_for_missed_ticks    0
 #define HVMPTM_no_delay_for_missed_ticks 1
 #define HVMPTM_no_missed_ticks_pending   2
 #define HVMPTM_one_missed_tick_pending   3

 /* Boolean: Enable virtual HPET (high-precision event timer)? (x86-only) */
 #define HVM_PARAM_HPET_ENABLED 11

 /* Identity-map page directory used by Intel EPT when CR0.PG=0. */
 #define HVM_PARAM_IDENT_PT     12

 /* ACPI S state: currently support S0 and S3 on x86. */
 #define HVM_PARAM_ACPI_S_STATE 14

 /* TSS used on Intel when CR0.PE=0. */
 #define HVM_PARAM_VM86_TSS     15

 /* Boolean: Enable aligning all periodic vpts to reduce interrupts */
 #define HVM_PARAM_VPT_ALIGN    16

 /* Console debug shared memory ring and event channel */
 #define HVM_PARAM_CONSOLE_PFN    17
 #define HVM_PARAM_CONSOLE_EVTCHN 18

 /*
  * Select location of ACPI PM1a and TMR control blocks. Currently two locations
  * are supported, specified by version 0 or 1 in this parameter:
  *   - 0: default, use the old addresses
  *        PM1A_EVT == 0x1f40; PM1A_CNT == 0x1f44; PM_TMR == 0x1f48
  *   - 1: use the new default qemu addresses
  *        PM1A_EVT == 0xb000; PM1A_CNT == 0xb004; PM_TMR == 0xb008
  * You can find these address definitions in <hvm/ioreq.h>
  */
 #define HVM_PARAM_ACPI_IOPORTS_LOCATION 19

 /* Params for the mem event rings */
 #define HVM_PARAM_PAGING_RING_PFN   27
 #define HVM_PARAM_MONITOR_RING_PFN  28
 #define HVM_PARAM_SHARING_RING_PFN  29

 /* SHUTDOWN_* action in case of a triple fault */
 #define HVM_PARAM_TRIPLE_FAULT_REASON 31

 #define HVM_PARAM_IOREQ_SERVER_PFN 32
 #define HVM_PARAM_NR_IOREQ_SERVER_PAGES 33

 /* Location of the VM Generation ID in guest physical address space. */
 #define HVM_PARAM_VM_GENERATION_ID_ADDR 34

 /*
  * Set mode for altp2m:
  *  disabled: don't activate altp2m (default)
  *  mixed: allow access to all altp2m ops for both in-guest and external tools
  *  external: allow access to external privileged tools only
  *  limited: guest only has limited access (ie. control VMFUNC and #VE)
  *
  * Note that 'mixed' mode has not been evaluated for safety from a
  * security perspective.  Before using this mode in a
  * security-critical environment, each subop should be evaluated for
  * safety, with unsafe subops blacklisted in XSM.
  */
 #define HVM_PARAM_ALTP2M       35
 #define XEN_ALTP2M_disabled      0
 #define XEN_ALTP2M_mixed         1
 #define XEN_ALTP2M_external      2
 #define XEN_ALTP2M_limited       3

 /*
  * Size of the x87 FPU FIP/FDP registers that the hypervisor needs to
  * save/restore.  This is a workaround for a hardware limitation that
  * does not allow the full FIP/FDP and FCS/FDS to be restored.
  *
  * Valid values are:
  *
  * 8: save/restore 64-bit FIP/FDP and clear FCS/FDS (default if CPU
  *    has FPCSDS feature).
  *
  * 4: save/restore 32-bit FIP/FDP, FCS/FDS, and clear upper 32-bits of
  *    FIP/FDP.
  *
  * 0: allow hypervisor to choose based on the value of FIP/FDP
  *    (default if CPU does not have FPCSDS).
  *
  * If FPCSDS (bit 13 in CPUID leaf 0x7, subleaf 0x0) is set, the CPU
  * never saves FCS/FDS and this parameter should be left at the
  * default of 8.
  */
 #define HVM_PARAM_X87_FIP_WIDTH 36

 /*
  * TSS (and its size) used on Intel when CR0.PE=0. The address occupies
  * the low 32 bits, while the size is in the high 32 ones.
  */
 #define HVM_PARAM_VM86_TSS_SIZED 37

 /* Enable MCA capabilities. */
 #define HVM_PARAM_MCA_CAP 38
 #define XEN_HVM_MCA_CAP_LMCE   (xen_mk_ullong(1) << 0)
 #define XEN_HVM_MCA_CAP_MASK   XEN_HVM_MCA_CAP_LMCE

 #define HVM_NR_PARAMS 39

 #endif /* __XEN_PUBLIC_HVM_PARAMS_H__ */
	/* SPDX-License-Identifier: MIT */
	/*
	* Copyright (c) 2007, Keir Fraser
	*/

	#ifndef __XEN_PUBLIC_HVM_PARAMS_H__
	#define __XEN_PUBLIC_HVM_PARAMS_H__

	FILE_LICENCE ( MIT );

	#include "hvm_op.h"

	/* These parameters are deprecated and their meaning is undefined. */
	#if defined(__XEN__) \|\| defined(__XEN_TOOLS__)

	#define HVM_PARAM_PAE_ENABLED 4
	#define HVM_PARAM_DM_DOMAIN 13
	#define HVM_PARAM_MEMORY_EVENT_CR0 20
	#define HVM_PARAM_MEMORY_EVENT_CR3 21
	#define HVM_PARAM_MEMORY_EVENT_CR4 22
	#define HVM_PARAM_MEMORY_EVENT_INT3 23
	#define HVM_PARAM_NESTEDHVM 24
	#define HVM_PARAM_MEMORY_EVENT_SINGLE_STEP 25
	#define HVM_PARAM_BUFIOREQ_EVTCHN 26
	#define HVM_PARAM_MEMORY_EVENT_MSR 30

	#endif /* defined(__XEN__) \|\| defined(__XEN_TOOLS__) */

	/*
	* Parameter space for HVMOP_{set,get}_param.
	*/

	#define HVM_PARAM_CALLBACK_IRQ 0
	#define HVM_PARAM_CALLBACK_IRQ_TYPE_MASK xen_mk_ullong(0xFF00000000000000)
	/*
	* How should CPU0 event-channel notifications be delivered?
	*
	* If val == 0 then CPU0 event-channel notifications are not delivered.
	* If val != 0, val[63:56] encodes the type, as follows:
	*/

	#define HVM_PARAM_CALLBACK_TYPE_GSI 0
	/*
	* val[55:0] is a delivery GSI. GSI 0 cannot be used, as it aliases val == 0,
	* and disables all notifications.
	*/

	#define HVM_PARAM_CALLBACK_TYPE_PCI_INTX 1
	/*
	* val[55:0] is a delivery PCI INTx line:
	* Domain = val[47:32], Bus = val[31:16] DevFn = val[15:8], IntX = val[1:0]
	*/

	#if defined(__i386__) \|\| defined(__x86_64__)
	#define HVM_PARAM_CALLBACK_TYPE_VECTOR 2
	/*
	* val[7:0] is a vector number. Check for XENFEAT_hvm_callback_vector to know
	* if this delivery method is available.
	*/
	#elif defined(__arm__) \|\| defined(__aarch64__)
	#define HVM_PARAM_CALLBACK_TYPE_PPI 2
	/*
	* val[55:16] needs to be zero.
	* val[15:8] is interrupt flag of the PPI used by event-channel:
	* bit 8: the PPI is edge(1) or level(0) triggered
	* bit 9: the PPI is active low(1) or high(0)
	* val[7:0] is a PPI number used by event-channel.
	* This is only used by ARM/ARM64 and masking/eoi the interrupt associated to
	* the notification is handled by the interrupt controller.
	*/
	#define HVM_PARAM_CALLBACK_TYPE_PPI_FLAG_MASK 0xFF00
	#define HVM_PARAM_CALLBACK_TYPE_PPI_FLAG_LOW_LEVEL 2
	#endif

	/*
	* These are not used by Xen. They are here for convenience of HVM-guest
	* xenbus implementations.
	*/
	#define HVM_PARAM_STORE_PFN 1
	#define HVM_PARAM_STORE_EVTCHN 2

	#define HVM_PARAM_IOREQ_PFN 5

	#define HVM_PARAM_BUFIOREQ_PFN 6

	#if defined(__i386__) \|\| defined(__x86_64__)

	/*
	* Viridian enlightenments
	*
	* (See http://download.microsoft.com/download/A/B/4/AB43A34E-BDD0-4FA6-BDEF-79EEF16E880B/Hypervisor%20Top%20Level%20Functional%20Specification%20v4.0.docx)
	*
	* To expose viridian enlightenments to the guest set this parameter
	* to the desired feature mask. The base feature set must be present
	* in any valid feature mask.
	*/
	#define HVM_PARAM_VIRIDIAN 9

	/* Base+Freq viridian feature sets:
	*
	* - Hypercall MSRs (HV_X64_MSR_GUEST_OS_ID and HV_X64_MSR_HYPERCALL)
	* - APIC access MSRs (HV_X64_MSR_EOI, HV_X64_MSR_ICR and HV_X64_MSR_TPR)
	* - Virtual Processor index MSR (HV_X64_MSR_VP_INDEX)
	* - Timer frequency MSRs (HV_X64_MSR_TSC_FREQUENCY and
	* HV_X64_MSR_APIC_FREQUENCY)
	*/
	#define _HVMPV_base_freq 0
	#define HVMPV_base_freq (1 << _HVMPV_base_freq)

	/* Feature set modifications */

	/* Disable timer frequency MSRs (HV_X64_MSR_TSC_FREQUENCY and
	* HV_X64_MSR_APIC_FREQUENCY).
	* This modification restores the viridian feature set to the
	* original 'base' set exposed in releases prior to Xen 4.4.
	*/
	#define _HVMPV_no_freq 1
	#define HVMPV_no_freq (1 << _HVMPV_no_freq)

	/* Enable Partition Time Reference Counter (HV_X64_MSR_TIME_REF_COUNT) */
	#define _HVMPV_time_ref_count 2
	#define HVMPV_time_ref_count (1 << _HVMPV_time_ref_count)

	/* Enable Reference TSC Page (HV_X64_MSR_REFERENCE_TSC) */
	#define _HVMPV_reference_tsc 3
	#define HVMPV_reference_tsc (1 << _HVMPV_reference_tsc)

	/* Use Hypercall for remote TLB flush */
	#define _HVMPV_hcall_remote_tlb_flush 4
	#define HVMPV_hcall_remote_tlb_flush (1 << _HVMPV_hcall_remote_tlb_flush)

	/* Use APIC assist */
	#define _HVMPV_apic_assist 5
	#define HVMPV_apic_assist (1 << _HVMPV_apic_assist)

	/* Enable crash MSRs */
	#define _HVMPV_crash_ctl 6
	#define HVMPV_crash_ctl (1 << _HVMPV_crash_ctl)

	/* Enable SYNIC MSRs */
	#define _HVMPV_synic 7
	#define HVMPV_synic (1 << _HVMPV_synic)

	/* Enable STIMER MSRs */
	#define _HVMPV_stimer 8
	#define HVMPV_stimer (1 << _HVMPV_stimer)

	/* Use Synthetic Cluster IPI Hypercall */
	#define _HVMPV_hcall_ipi 9
	#define HVMPV_hcall_ipi (1 << _HVMPV_hcall_ipi)

	/* Enable ExProcessorMasks */
	#define _HVMPV_ex_processor_masks 10
	#define HVMPV_ex_processor_masks (1 << _HVMPV_ex_processor_masks)

	/* Allow more than 64 VPs */
	#define _HVMPV_no_vp_limit 11
	#define HVMPV_no_vp_limit (1 << _HVMPV_no_vp_limit)

	/* Enable vCPU hotplug */
	#define _HVMPV_cpu_hotplug 12
	#define HVMPV_cpu_hotplug (1 << _HVMPV_cpu_hotplug)

	#define HVMPV_feature_mask \
	(HVMPV_base_freq \| \
	HVMPV_no_freq \| \
	HVMPV_time_ref_count \| \
	HVMPV_reference_tsc \| \
	HVMPV_hcall_remote_tlb_flush \| \
	HVMPV_apic_assist \| \
	HVMPV_crash_ctl \| \
	HVMPV_synic \| \
	HVMPV_stimer \| \
	HVMPV_hcall_ipi \| \
	HVMPV_ex_processor_masks \| \
	HVMPV_no_vp_limit \| \
	HVMPV_cpu_hotplug)

	#endif

	/*
	* Set mode for virtual timers (currently x86 only):
	* delay_for_missed_ticks (default):
	* Do not advance a vcpu's time beyond the correct delivery time for
	* interrupts that have been missed due to preemption. Deliver missed
	* interrupts when the vcpu is rescheduled and advance the vcpu's virtual
	* time stepwise for each one.
	* no_delay_for_missed_ticks:
	* As above, missed interrupts are delivered, but guest time always tracks
	* wallclock (i.e., real) time while doing so.
	* no_missed_ticks_pending:
	* No missed interrupts are held pending. Instead, to ensure ticks are
	* delivered at some non-zero rate, if we detect missed ticks then the
	* internal tick alarm is not disabled if the VCPU is preempted during the
	* next tick period.
	* one_missed_tick_pending:
	* Missed interrupts are collapsed together and delivered as one 'late tick'.
	* Guest time always tracks wallclock (i.e., real) time.
	*/
	#define HVM_PARAM_TIMER_MODE 10
	#define HVMPTM_delay_for_missed_ticks 0
	#define HVMPTM_no_delay_for_missed_ticks 1
	#define HVMPTM_no_missed_ticks_pending 2
	#define HVMPTM_one_missed_tick_pending 3

	/* Boolean: Enable virtual HPET (high-precision event timer)? (x86-only) */
	#define HVM_PARAM_HPET_ENABLED 11

	/* Identity-map page directory used by Intel EPT when CR0.PG=0. */
	#define HVM_PARAM_IDENT_PT 12

	/* ACPI S state: currently support S0 and S3 on x86. */
	#define HVM_PARAM_ACPI_S_STATE 14

	/* TSS used on Intel when CR0.PE=0. */
	#define HVM_PARAM_VM86_TSS 15

	/* Boolean: Enable aligning all periodic vpts to reduce interrupts */
	#define HVM_PARAM_VPT_ALIGN 16

	/* Console debug shared memory ring and event channel */
	#define HVM_PARAM_CONSOLE_PFN 17
	#define HVM_PARAM_CONSOLE_EVTCHN 18

	/*
	* Select location of ACPI PM1a and TMR control blocks. Currently two locations
	* are supported, specified by version 0 or 1 in this parameter:
	* - 0: default, use the old addresses
	* PM1A_EVT == 0x1f40; PM1A_CNT == 0x1f44; PM_TMR == 0x1f48
	* - 1: use the new default qemu addresses
	* PM1A_EVT == 0xb000; PM1A_CNT == 0xb004; PM_TMR == 0xb008
	* You can find these address definitions in <hvm/ioreq.h>
	*/
	#define HVM_PARAM_ACPI_IOPORTS_LOCATION 19

	/* Params for the mem event rings */
	#define HVM_PARAM_PAGING_RING_PFN 27
	#define HVM_PARAM_MONITOR_RING_PFN 28
	#define HVM_PARAM_SHARING_RING_PFN 29

	/* SHUTDOWN_* action in case of a triple fault */
	#define HVM_PARAM_TRIPLE_FAULT_REASON 31

	#define HVM_PARAM_IOREQ_SERVER_PFN 32
	#define HVM_PARAM_NR_IOREQ_SERVER_PAGES 33

	/* Location of the VM Generation ID in guest physical address space. */
	#define HVM_PARAM_VM_GENERATION_ID_ADDR 34

	/*
	* Set mode for altp2m:
	* disabled: don't activate altp2m (default)
	* mixed: allow access to all altp2m ops for both in-guest and external tools
	* external: allow access to external privileged tools only
	* limited: guest only has limited access (ie. control VMFUNC and #VE)
	*
	* Note that 'mixed' mode has not been evaluated for safety from a
	* security perspective. Before using this mode in a
	* security-critical environment, each subop should be evaluated for
	* safety, with unsafe subops blacklisted in XSM.
	*/
	#define HVM_PARAM_ALTP2M 35
	#define XEN_ALTP2M_disabled 0
	#define XEN_ALTP2M_mixed 1
	#define XEN_ALTP2M_external 2
	#define XEN_ALTP2M_limited 3

	/*
	* Size of the x87 FPU FIP/FDP registers that the hypervisor needs to
	* save/restore. This is a workaround for a hardware limitation that
	* does not allow the full FIP/FDP and FCS/FDS to be restored.
	*
	* Valid values are:
	*
	* 8: save/restore 64-bit FIP/FDP and clear FCS/FDS (default if CPU
	* has FPCSDS feature).
	*
	* 4: save/restore 32-bit FIP/FDP, FCS/FDS, and clear upper 32-bits of
	* FIP/FDP.
	*
	* 0: allow hypervisor to choose based on the value of FIP/FDP
	* (default if CPU does not have FPCSDS).
	*
	* If FPCSDS (bit 13 in CPUID leaf 0x7, subleaf 0x0) is set, the CPU
	* never saves FCS/FDS and this parameter should be left at the
	* default of 8.
	*/
	#define HVM_PARAM_X87_FIP_WIDTH 36

	/*
	* TSS (and its size) used on Intel when CR0.PE=0. The address occupies
	* the low 32 bits, while the size is in the high 32 ones.
	*/
	#define HVM_PARAM_VM86_TSS_SIZED 37

	/* Enable MCA capabilities. */
	#define HVM_PARAM_MCA_CAP 38
	#define XEN_HVM_MCA_CAP_LMCE (xen_mk_ullong(1) << 0)
	#define XEN_HVM_MCA_CAP_MASK XEN_HVM_MCA_CAP_LMCE

	#define HVM_NR_PARAMS 39

	#endif /* __XEN_PUBLIC_HVM_PARAMS_H__ */