blob: 9c00d15d771b166f587b365305aed2ecb6a33171 [file] [log] [blame]
/*
* Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
* Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
* Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
*
* Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>.
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
FILE_LICENCE ( MIT );
/**************\
* Capabilities *
\**************/
#include "ath5k.h"
#include "reg.h"
#include "base.h"
/*
* Fill the capabilities struct
* TODO: Merge this with EEPROM code when we are done with it
*/
int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
{
u16 ee_header;
/* Capabilities stored in the EEPROM */
ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
if (ah->ah_version == AR5K_AR5210) {
/*
* Set radio capabilities
* (The AR5110 only supports the middle 5GHz band)
*/
ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
ah->ah_capabilities.cap_range.range_2ghz_min = 0;
ah->ah_capabilities.cap_range.range_2ghz_max = 0;
/* Set supported modes */
ah->ah_capabilities.cap_mode |= AR5K_MODE_BIT_11A;
ah->ah_capabilities.cap_mode |= AR5K_MODE_BIT_11A_TURBO;
} else {
/*
* XXX The tranceiver supports frequencies from 4920 to 6100GHz
* XXX and from 2312 to 2732GHz. There are problems with the
* XXX current ieee80211 implementation because the IEEE
* XXX channel mapping does not support negative channel
* XXX numbers (2312MHz is channel -19). Of course, this
* XXX doesn't matter because these channels are out of range
* XXX but some regulation domains like MKK (Japan) will
* XXX support frequencies somewhere around 4.8GHz.
*/
/*
* Set radio capabilities
*/
if (AR5K_EEPROM_HDR_11A(ee_header)) {
/* 4920 */
ah->ah_capabilities.cap_range.range_5ghz_min = 5005;
ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
/* Set supported modes */
ah->ah_capabilities.cap_mode |= AR5K_MODE_BIT_11A;
ah->ah_capabilities.cap_mode |= AR5K_MODE_BIT_11A_TURBO;
if (ah->ah_version == AR5K_AR5212)
ah->ah_capabilities.cap_mode |=
AR5K_MODE_BIT_11G_TURBO;
}
/* Enable 802.11b if a 2GHz capable radio (2111/5112) is
* connected */
if (AR5K_EEPROM_HDR_11B(ee_header) ||
(AR5K_EEPROM_HDR_11G(ee_header) &&
ah->ah_version != AR5K_AR5211)) {
/* 2312 */
ah->ah_capabilities.cap_range.range_2ghz_min = 2412;
ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
if (AR5K_EEPROM_HDR_11B(ee_header))
ah->ah_capabilities.cap_mode |=
AR5K_MODE_BIT_11B;
if (AR5K_EEPROM_HDR_11G(ee_header) &&
ah->ah_version != AR5K_AR5211)
ah->ah_capabilities.cap_mode |=
AR5K_MODE_BIT_11G;
}
}
/* GPIO */
ah->ah_gpio_npins = AR5K_NUM_GPIO;
/* Set number of supported TX queues */
ah->ah_capabilities.cap_queues.q_tx_num = 1;
return 0;
}
/* Main function used by the driver part to check caps */
int ath5k_hw_get_capability(struct ath5k_hw *ah,
enum ath5k_capability_type cap_type,
u32 capability __unused, u32 *result)
{
switch (cap_type) {
case AR5K_CAP_NUM_TXQUEUES:
if (result) {
*result = 1;
goto yes;
}
case AR5K_CAP_VEOL:
goto yes;
case AR5K_CAP_COMPRESSION:
if (ah->ah_version == AR5K_AR5212)
goto yes;
else
goto no;
case AR5K_CAP_BURST:
goto yes;
case AR5K_CAP_TPC:
goto yes;
case AR5K_CAP_BSSIDMASK:
if (ah->ah_version == AR5K_AR5212)
goto yes;
else
goto no;
case AR5K_CAP_XR:
if (ah->ah_version == AR5K_AR5212)
goto yes;
else
goto no;
default:
goto no;
}
no:
return -EINVAL;
yes:
return 0;
}